150 Metre Step Out At Storie Deposit Hits 144 metres Grading 0.095% Moly!
Original announcement by tmx on
- Company
- Columbia Yukon Explorations Inc.
- Ticker
- VOR
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Molybdenum
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-13 15:09:31 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Columbia Yukon Explorations Inc. announced additional assay results from its Storie molybdenum deposit in northern British Columbia, including significant step-out and infill drilling. Eight holes intersected molybdenum mineralization, with a highlight of 144 metres grading 0.095% Mo. The drilling aims to expand the known resource and reclassify portions from Indicated to Measured category.
Reasoning: Columbia Yukon Explorations announced new drill results from its Storie molybdenum deposit, including significant step-out intercepts extending mineralization and infill drilling aimed at upgrading resource confidence. The results feature wide intervals of molybdenum mineralization, with the headline intercept being 144 metres grading 0.095% Mo.
Positive factors
- Step-Out Extension
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 17
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill holes ST08-130, 131, 133, 134, and 137 are located 50 to 150 metres west of the known Indicated resource, extending mineralization beyond previously defined limits.
Evidence · text
“Drill hole ST08-130 (located 150 metres west of the known Indicated resource)”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: Drill holes ST08-132, 135, and 136 are described as infill holes designed to reclassify the known deposit from an Indicated to a Measured category.
Evidence · text
“Drill hole ST08-132 (an infill hole designed to reclassify the known deposit from an Indicated category to a Measured category”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions internal QA/QC procedures, inter-laboratory analysis, and the involvement of Loring Labs and Acme Analytical Laboratories.
Evidence · text
“In addition to both Loring Labs' and Columbia Yukon's internal QA/QC, every 20th sample reject pulp is being sent to Acme Analytical Laboratories of Vancouver, B.C. for inter-laboratory analysis.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. Arnold Pollmer, P.Geo., is named as the Qualified Person responsible for reviewing and approving the news release in accordance with NI 43-101 regulations.
Evidence · text
“This news release has been reviewed and approved by Mr. Arnold Pollmer, P.Geo., who is acting as the Qualified Person for the Company's Storie molybdenum project in accordance with regulations under NI 43-101.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The reported intervals are downhole lengths, and no true width or drill orientation relative to mineralization is provided.
Evidence · text
“144 metres Grading 0.095% Moly!”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document does not state the cut-off grade used for compositing the reported drill intervals.
Evidence · text
“144 metres Grading 0.095% Moly!”
Extracted facts
Stored fact records: 17. Some facts used in scoring do not have a stored record.
Drill Results (17)
ST08-130Storie · molybdenumGrade: 0.057Grade Unit: %Intercept: 423 mView all detailsHide details
Identity
- Hole ID
- ST08-130
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.057
- Grade Unit
- %
- Intercept
- 423 m
- From
- 18 m
- To
- 441 m
- Intercept Depth
- 18 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-130:18-441
Location
- Location
- 150 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This wide intercept from a step-out hole extends known molybdenum mineralization, indicating potential for resource expansion.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.057”
Context: 423
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-130Storie · molybdenumGrade: 0.095Grade Unit: %Intercept: 144 mView all detailsHide details
Identity
- Hole ID
- ST08-130
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.095
- Grade Unit
- %
- Intercept
- 144 m
- From
- 291 m
- To
- 435 m
- Intercept Depth
- 18 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-130:291-435
Location
- Location
- 150 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This high-grade sub-interval within a wider intercept from a step-out hole is a strong indicator of significant molybdenum mineralization and potential resource expansion.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.095”
Context: 144
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-131Storie · molybdenumGrade: 0.059Grade Unit: %Intercept: 123 mView all detailsHide details
Identity
- Hole ID
- ST08-131
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.059
- Grade Unit
- %
- Intercept
- 123 m
- From
- 138 m
- To
- 261 m
- Intercept Depth
- 138 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-131:138-261
Location
- Location
- 50 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This intercept from a step-out hole indicates extension of molybdenum mineralization, contributing to resource growth potential.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.059”
Context: 123
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-131Storie · molybdenumGrade: 0.117Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- ST08-131
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.117
- Grade Unit
- %
- Intercept
- 12 m
- From
- 249 m
- To
- 261 m
- Intercept Depth
- 138 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-131:249-261
Location
- Location
- 50 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a step-out hole further supports the extension of molybdenum mineralization.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.117”
Context: 12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-132Storie · molybdenumGrade: 0.055Grade Unit: %Intercept: 143 mView all detailsHide details
Identity
- Hole ID
- ST08-132
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.055
- Grade Unit
- %
- Intercept
- 143 m
- From
- 65 m
- To
- 208 m
- Intercept Depth
- 65 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-132:65-208
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This infill intercept confirms molybdenum mineralization within the known resource, supporting efforts to upgrade resource classification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.055”
Context: 143
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-133Storie · molybdenumGrade: 0.034Grade Unit: %Intercept: 204 mView all detailsHide details
Identity
- Hole ID
- ST08-133
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.034
- Grade Unit
- %
- Intercept
- 204 m
- From
- 121 m
- To
- 325 m
- Intercept Depth
- 121 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-133:121-325
Location
- Location
- 150 metres west of the known Indicated resource on the southern most edge of the deposit
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This intercept from a step-out hole contributes to extending molybdenum mineralization, albeit at a lower grade.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.034”
Context: 204
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-133Storie · molybdenumGrade: 0.043Grade Unit: %Intercept: 81 mView all detailsHide details
Identity
- Hole ID
- ST08-133
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.043
- Grade Unit
- %
- Intercept
- 81 m
- From
- 244 m
- To
- 325 m
- Intercept Depth
- 121 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-133:244-325
Location
- Location
- 150 metres west of the known Indicated resource on the southern most edge of the deposit
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This sub-interval within a step-out hole confirms molybdenum mineralization, supporting the extension of the deposit.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.043”
Context: 81
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-134Storie · molybdenumGrade: 0.059Grade Unit: %Intercept: 37 mView all detailsHide details
Identity
- Hole ID
- ST08-134
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.059
- Grade Unit
- %
- Intercept
- 37 m
- From
- 237 m
- To
- 274 m
- Intercept Depth
- 237 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-134:237-274
Location
- Location
- 50 metres west of the known Indicated resource on the southern most edge of the deposit
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This intercept from a step-out hole indicates extension of molybdenum mineralization, contributing to resource growth potential.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.059”
Context: 37
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-135Storie · molybdenumGrade: 0.051Grade Unit: %Intercept: 368 mView all detailsHide details
Identity
- Hole ID
- ST08-135
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.051
- Grade Unit
- %
- Intercept
- 368 m
- From
- 31 m
- To
- 399 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-135:31-399
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This wide infill intercept confirms molybdenum mineralization within the known resource, supporting efforts to upgrade resource classification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.051”
Context: 368
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-135Storie · molybdenumGrade: 0.081Grade Unit: %Intercept: 154 mView all detailsHide details
Identity
- Hole ID
- ST08-135
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.081
- Grade Unit
- %
- Intercept
- 154 m
- From
- 93 m
- To
- 247 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-135:93-247
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This higher-grade sub-interval within an infill hole provides strong confirmation of molybdenum mineralization for resource reclassification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.081”
Context: 154
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-135Storie · molybdenumGrade: 0.117Grade Unit: %Intercept: 65 mView all detailsHide details
Identity
- Hole ID
- ST08-135
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.117
- Grade Unit
- %
- Intercept
- 65 m
- From
- 159 m
- To
- 224 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-135:159-224
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This very high-grade sub-interval within an infill hole provides strong evidence for upgrading resource classification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.117”
Context: 65
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-136Storie · molybdenumGrade: 0.071Grade Unit: %Intercept: 308 mView all detailsHide details
Identity
- Hole ID
- ST08-136
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.071
- Grade Unit
- %
- Intercept
- 308 m
- From
- 88 m
- To
- 396 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-136:88-396
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This wide infill intercept confirms molybdenum mineralization within the known resource, supporting efforts to upgrade resource classification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.071”
Context: 308
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-136Storie · molybdenumGrade: 0.086Grade Unit: %Intercept: 225 mView all detailsHide details
Identity
- Hole ID
- ST08-136
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.086
- Grade Unit
- %
- Intercept
- 225 m
- From
- 88 m
- To
- 313 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-136:88-313
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This high-grade sub-interval within an infill hole provides strong confirmation of molybdenum mineralization for resource reclassification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.086”
Context: 225
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-136Storie · molybdenumGrade: 0.126Grade Unit: %Intercept: 78 mView all detailsHide details
Identity
- Hole ID
- ST08-136
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.126
- Grade Unit
- %
- Intercept
- 78 m
- From
- 168 m
- To
- 246 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- ST08-136:168-246
Location
- Location
- infill hole designed to reclassify the known deposit from an Indicated category to a Measured category
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This very high-grade sub-interval within an infill hole provides strong evidence for upgrading resource classification.
Positive factors
- Infill Drilling
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.126”
Context: 78
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
ST08-137Storie · molybdenumGrade: 0.054Grade Unit: %Intercept: 276 mView all detailsHide details
Identity
- Hole ID
- ST08-137
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.054
- Grade Unit
- %
- Intercept
- 276 m
- From
- 69 m
- To
- 345 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-137:69-345
Location
- Location
- 100 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This wide intercept from a step-out hole indicates extension of molybdenum mineralization, contributing to resource growth potential.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.054”
Context: 276
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-137Storie · molybdenumGrade: 0.097Grade Unit: %Intercept: 36 mView all detailsHide details
Identity
- Hole ID
- ST08-137
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.097
- Grade Unit
- %
- Intercept
- 36 m
- From
- 69 m
- To
- 105 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-137:69-105
Location
- Location
- 100 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a step-out hole further supports the extension of molybdenum mineralization.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.097”
Context: 36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
ST08-137Storie · molybdenumGrade: 0.067Grade Unit: %Intercept: 141 mView all detailsHide details
Identity
- Hole ID
- ST08-137
- Project
- Storie
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- VOR
Geometry
- Grade
- 0.067
- Grade Unit
- %
- Intercept
- 141 m
- From
- 204 m
- To
- 345 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- ST08-137:204-345
Location
- Location
- 100 metres west of the known Indicated resource
- Loc. Source
- document
QA/QC
- Laboratory
- Loring Labs of Calgary, Alberta and Acme Analytical Laboratories of Vancouver, B.C.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- check_assays, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2009-01-14T00:00:00.000Z
Reasoning: This sub-interval within a step-out hole confirms molybdenum mineralization, supporting the extension of the deposit.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
- QP/CP Signed
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.067”
Context: 141
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.