1911 Gold Reports High-Grade Intercepts from the SAM W Target at True North of 11.31 g/t Au over 1.70 m and 6.79 g/t Au over 2.40 m
Original announcement by tmx on
- Company
- 1911 Gold Corporation
- Ticker
- AUMB
- Exchange
- TSX
- Region
- Manitoba, Canada
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-17 10:31:16 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
1911 Gold reports high-grade gold intercepts from its SAM W target at the True North Gold Project in Manitoba, Canada. Key results include 11.31 g/t Au over 1.70 m and 6.79 g/t Au over 2.40 m. The drilling confirms continuity of mineralization over a 500 m strike length and to over 600 m down-plunge, with results contributing to an upcoming maiden resource estimate and an updated global resource for the project. The company also disclosed detailed QA/QC protocols.
Reasoning: The announcement reports high-grade gold intercepts that confirm and extend mineralization at the SAM W target, supporting an upcoming maiden resource estimate and an updated global resource. The results demonstrate continuity and potential for resource growth, with robust QA/QC procedures disclosed. The estimated true width rather than a precise figure for each intercept is a minor negative.
Positive factors
- High-grade gold intercepts confirm continuity of mineralization.
- Drilling extends mineralization along strike and down-plunge, indicating growth potential.
- Results will support a maiden mineral resource estimate and an updated global resource estimate.
- Comprehensive QA/QC procedures are disclosed, including third-party checks.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure for each intercept.
- Some intercepts are narrow, which can impact mining economics.
Facts used in scoring: 33
Extracted facts
Stored fact records: 33. Some facts used in scoring do not have a stored record.
Drill Results (33)
TN-26-073True North · goldGrade: 11.31Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- TN-26-073
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 11.31
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 391.1 m
- To
- 392.8 m
- Hole Depth
- 470 m
- Intercept Depth
- 391.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-073:391.1-392.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311854
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 263 m
- Azimuth
- 170 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows high-grade gold, exceeding the exceptional threshold for orogenic deposits, and contributes to the continuity of mineralization at SAM W. The grade-thickness product is strong. True width is estimated, not precisely stated.
Positive factors
- High-grade gold intercept (11.31 g/t Au) exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (19.23 g/t·m) is strong, exceeding the 30 g/t·m threshold for gold.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“11.31”
Context: 1.70
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 11.31 g/t over 1.70 m is well above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“11.31”
Context: 1.70
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-073True North · goldGrade: 16.2Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- TN-26-073
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 16.2
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 392 m
- To
- 392.8 m
- Hole Depth
- 470 m
- Intercept Depth
- 391.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-073:392-392.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311854
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 263 m
- Azimuth
- 170 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This sub-interval shows exceptionally high-grade gold, further enhancing the overall intercept's quality. The grade-thickness product is strong for a narrow zone. True width is estimated, not precisely stated.
Positive factors
- Very high-grade gold intercept (16.20 g/t Au) significantly exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (12.96 g/t·m) is strong for a sub-interval.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“16.20”
Context: 0.80
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 16.20 g/t over 0.80 m is well above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“16.20”
Context: 0.80
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-077True North · goldGrade: 0.47Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TN-26-077
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 338.8 m
- To
- 341.2 m
- Hole Depth
- 400 m
- Intercept Depth
- 338.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-077:338.8-341.2
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 265 m
- Azimuth
- 226 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.47 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (1.128 g/t·m) is very low.
Evidence · table
“0.47”
Context: 2.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-077True North · goldGrade: 0.87Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- TN-26-077
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 348.9 m
- To
- 350 m
- Hole Depth
- 400 m
- Intercept Depth
- 338.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-077:348.9-350
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 265 m
- Azimuth
- 226 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.87 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.957 g/t·m) is very low.
Evidence · table
“0.87”
Context: 1.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-082True North · goldGrade: 6.79Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TN-26-082
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 6.79
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 204.4 m
- To
- 206.8 m
- Hole Depth
- 391 m
- Intercept Depth
- 204.4 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-082:204.4-206.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 205 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows high-grade gold, exceeding the exceptional threshold for orogenic deposits, and contributes to the continuity of mineralization at SAM W. The grade-thickness product is strong. True width is estimated, not precisely stated.
Positive factors
- High-grade gold intercept (6.79 g/t Au) exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (16.296 g/t·m) is strong.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“6.79”
Context: 2.40
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 6.79 g/t over 2.40 m is above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“6.79”
Context: 2.40
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-082True North · goldGrade: 7.98Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- TN-26-082
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 7.98
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 205.4 m
- To
- 206.8 m
- Hole Depth
- 391 m
- Intercept Depth
- 204.4 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-082:205.4-206.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 205 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This sub-interval shows high-grade gold, further enhancing the overall intercept's quality. The grade-thickness product is strong for a narrow zone. True width is estimated, not precisely stated.
Positive factors
- High-grade gold intercept (7.98 g/t Au) exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (11.172 g/t·m) is strong for a sub-interval.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“7.98”
Context: 1.40
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 7.98 g/t over 1.40 m is above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“7.98”
Context: 1.40
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-082True North · goldGrade: 3.82Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- TN-26-082
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 3.82
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 351 m
- To
- 352 m
- Hole Depth
- 391 m
- Intercept Depth
- 204.4 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-082:351-352
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 205 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold, exceeding the cut-off grade, and contributes to the overall mineralization at SAM W. True width is estimated, not precisely stated.
Positive factors
- Moderate-grade gold intercept (3.82 g/t Au) exceeds the stated cut-off grade of 2.25 g/t Au.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“3.82”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 0.95Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.95
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 51.5 m
- To
- 52.2 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:51.5-52.2
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.95 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.665 g/t·m) is very low.
Evidence · table
“0.95”
Context: 0.70
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 3.74Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 3.74
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 52.2 m
- To
- 53 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:52.2-53
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold, exceeding the cut-off grade, and contributes to the overall mineralization at SAM W. True width is estimated, not precisely stated.
Positive factors
- Moderate-grade gold intercept (3.74 g/t Au) exceeds the stated cut-off grade of 2.25 g/t Au.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“3.74”
Context: 0.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 1.95Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.95
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 57.9 m
- To
- 59 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:57.9-59
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.95 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (2.145 g/t·m) is low.
Evidence · table
“1.95”
Context: 1.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 0.66Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 272.2 m
- To
- 273 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:272.2-273
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.66 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.528 g/t·m) is very low.
Evidence · table
“0.66”
Context: 0.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 0.58Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 300.8 m
- To
- 301.7 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:300.8-301.7
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.58 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.522 g/t·m) is very low.
Evidence · table
“0.58”
Context: 0.90
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 1.37Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 320 m
- To
- 321.2 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:320-321.2
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.37 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (1.644 g/t·m) is low.
Evidence · table
“1.37”
Context: 1.20
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 0.94Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 325.8 m
- To
- 326.5 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:325.8-326.5
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.94 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.658 g/t·m) is very low.
Evidence · table
“0.94”
Context: 0.70
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 5.72Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 5.72
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 327.4 m
- To
- 330.4 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:327.4-330.4
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows high-grade gold, exceeding the exceptional threshold for orogenic deposits, and contributes to the continuity of mineralization at SAM W. The grade-thickness product is strong. True width is estimated, not precisely stated.
Positive factors
- High-grade gold intercept (5.72 g/t Au) exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (17.16 g/t·m) is strong.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“5.72”
Context: 3.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 5.72 g/t over 3.00 m is above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“5.72”
Context: 3.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 9.65Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 9.65
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 329.3 m
- To
- 330.4 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:329.3-330.4
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This sub-interval shows high-grade gold, further enhancing the overall intercept's quality. The grade-thickness product is strong for a narrow zone. True width is estimated, not precisely stated.
Positive factors
- High-grade gold intercept (9.65 g/t Au) exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (10.615 g/t·m) is strong for a sub-interval.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“9.65”
Context: 1.10
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 9.65 g/t over 1.10 m is well above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“9.65”
Context: 1.10
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-089True North · goldGrade: 1.07Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- TN-26-089
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 331.8 m
- To
- 332.7 m
- Hole Depth
- 391 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-089:331.8-332.7
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656268
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 168 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.07 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.963 g/t·m) is low.
Evidence · table
“1.07”
Context: 0.90
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-092True North · goldGrade: 0.54Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- TN-26-092
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 92.8 m
- To
- 93.8 m
- Hole Depth
- 448 m
- Intercept Depth
- 92.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-092:92.8-93.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 130 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.54 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.54 g/t·m) is very low.
Evidence · table
“0.54”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-092True North · goldGrade: 0.58Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- TN-26-092
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 97.2 m
- To
- 99.2 m
- Hole Depth
- 448 m
- Intercept Depth
- 92.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-092:97.2-99.2
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 130 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is low-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Low-grade gold intercept (0.58 g/t Au) is below the weak threshold for orogenic gold (2.5 g/t Au) and below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (1.16 g/t·m) is very low.
Evidence · table
“0.58”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-092True North · goldGrade: 2.17Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- TN-26-092
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 2.17
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 384.6 m
- To
- 385.8 m
- Hole Depth
- 448 m
- Intercept Depth
- 92.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-092:384.6-385.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 130 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls just below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (2.17 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
Evidence · table
“2.17”
Context: 1.20
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-092True North · goldGrade: 3.29Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- TN-26-092
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 3.29
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 390.7 m
- To
- 391.7 m
- Hole Depth
- 448 m
- Intercept Depth
- 92.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-092:390.7-391.7
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 130 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold, exceeding the cut-off grade, and contributes to the overall mineralization at SAM W. True width is estimated, not precisely stated.
Positive factors
- Moderate-grade gold intercept (3.29 g/t Au) exceeds the stated cut-off grade of 2.25 g/t Au.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“3.29”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-092True North · goldGrade: 2.2Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- TN-26-092
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 400.4 m
- To
- 401 m
- Hole Depth
- 448 m
- Intercept Depth
- 92.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-092:400.4-401
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 130 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls just below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (2.20 g/t Au) is just below the stated cut-off grade of 2.25 g/t Au.
Evidence · table
“2.20”
Context: 0.60
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-092True North · goldGrade: 2.02Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- TN-26-092
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 2.02
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 403.5 m
- To
- 404.1 m
- Hole Depth
- 448 m
- Intercept Depth
- 92.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-092:403.5-404.1
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311852
- Northing
- 5656269
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 130 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (2.02 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
Evidence · table
“2.02”
Context: 0.60
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-096True North · goldGrade: 2.15Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- TN-26-096
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 2.15
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 67.4 m
- To
- 68.2 m
- Hole Depth
- 439 m
- Intercept Depth
- 67.4 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-096:67.4-68.2
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656271
- CRS
- UTM NAD83 Zone 15
- Elevation
- 263 m
- Azimuth
- 109 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls just below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (2.15 g/t Au) is just below the stated cut-off grade of 2.25 g/t Au.
Evidence · table
“2.15”
Context: 0.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-096True North · goldGrade: 1.03Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- TN-26-096
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 392.8 m
- To
- 393.3 m
- Hole Depth
- 439 m
- Intercept Depth
- 67.4 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-096:392.8-393.3
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656271
- CRS
- UTM NAD83 Zone 15
- Elevation
- 263 m
- Azimuth
- 109 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.03 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.515 g/t·m) is very low.
Evidence · table
“1.03”
Context: 0.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-096True North · goldGrade: 1.45Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- TN-26-096
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.45
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 396 m
- To
- 396.8 m
- Hole Depth
- 439 m
- Intercept Depth
- 67.4 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-096:396-396.8
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311853
- Northing
- 5656271
- CRS
- UTM NAD83 Zone 15
- Elevation
- 263 m
- Azimuth
- 109 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.45 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (1.16 g/t·m) is low.
Evidence · table
“1.45”
Context: 0.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 1.27Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 57 m
- To
- 57.9 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:57-57.9
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.27 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (1.143 g/t·m) is low.
Evidence · table
“1.27”
Context: 0.90
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 1.3Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 82.8 m
- To
- 83.4 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:82.8-83.4
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.30 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.78 g/t·m) is very low.
Evidence · table
“1.30”
Context: 0.60
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 1.69Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.69
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 358.8 m
- To
- 360 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:358.8-360
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.69 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (2.028 g/t·m) is low.
Evidence · table
“1.69”
Context: 1.20
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 1.37Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 360.9 m
- To
- 361.4 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:360.9-361.4
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.37 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (0.685 g/t·m) is very low.
Evidence · table
“1.37”
Context: 0.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 11.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 11.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 361.4 m
- To
- 361.9 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:361.4-361.9
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows high-grade gold, exceeding the exceptional threshold for orogenic deposits, and contributes to the continuity of mineralization at SAM W. True width is estimated, not precisely stated.
Positive factors
- High-grade gold intercept (11.80 g/t Au) exceeds exceptional threshold for orogenic gold (5 g/t Au).
- Grade-thickness product (5.9 g/t·m) is strong for a narrow intercept.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“11.80”
Context: 0.50
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The gold grade of 11.80 g/t over 0.50 m is well above the exceptional threshold for orogenic gold deposits (5 g/t Au).
Evidence · table
“11.80”
Context: 0.50
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 2.4Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 363.6 m
- To
- 364.4 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:363.6-364.4
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold, exceeding the cut-off grade, and contributes to the overall mineralization at SAM W. True width is estimated, not precisely stated.
Positive factors
- Moderate-grade gold intercept (2.40 g/t Au) is just below the moderate threshold for orogenic gold (4 g/t Au) but above the stated cut-off grade of 2.25 g/t Au.
Negative factors
- True width is estimated as a range (70% to 90%) rather than a precise figure.
Evidence · table
“2.40”
Context: 0.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TN-26-097True North · goldGrade: 1.16Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- TN-26-097
- Project
- True North
- Commodity
- gold
- Region
- canada_mb
- Reported Region
- canada_mb
- Ticker
- AUMB
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 364.9 m
- To
- 366.2 m
- Hole Depth
- 416 m
- Intercept Depth
- 57 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TN-26-097:364.9-366.2
- Mining Method
- underground
Location
- Location
- SAM W
- Easting
- 311851
- Northing
- 5656270
- CRS
- UTM NAD83 Zone 15
- Elevation
- 264 m
- Azimuth
- 145 °
- Dip
- -77 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. (Actlabs) and ALS-Chemex Laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Compositing
- Cutoff Grade
- 2.25
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-25T00:00:00.000Z
Reasoning: This intercept is weak-grade and falls below the stated cut-off grade, indicating it is not economically significant under current parameters. It is likely included for geological context.
Negative factors
- Weak-grade gold intercept (1.16 g/t Au) is below the stated cut-off grade of 2.25 g/t Au.
- Grade-thickness product (1.508 g/t·m) is low.
Evidence · table
“1.16”
Context: 1.30
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but a specific true width is not provided for this intercept.
Evidence · text
“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference materials, blanks, and third-party check assays.
Evidence · text
“Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intercepts.
Evidence · text
“Intercepts above a cut-off grade of 2.25 g/t Au Maximum of 2.50 m internal dilution”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.