1911 Gold Reports High-Grade Intercepts from the SAM W Target at True North of 11.31 g/t Au over 1.70 m and 6.79 g/t Au over 2.40 m

Evidence · table

“11.31”

Context: 1.70

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“16.20”

Context: 0.80

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“6.79”

Context: 2.40

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“7.98”

Context: 1.40

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“5.72”

Context: 3.00

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“9.65”

Context: 1.10

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has. been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“11.80”

Context: 0.50

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · text

“TN-25-064¹ which intersected 24.83 g/t Au over 2.60 m”

Evidence · text

“1 - See press release dated November 11, 2025 (1911 Gold Intersects up to 24.83 g/t Gold over 2.60 m on San Antonio West at the True North Project).”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · text

“including 46.00 g/t Au over 1.00 m”

Evidence · text

“1 - See press release dated November 11, 2025 (1911 Gold Intersects up to 24.83 g/t Gold over 2.60 m on San Antonio West at the True North Project).”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”

Evidence · text

“TN-25-071¹ which intersected 12.80 g/t Au over 0.80 m”

Evidence · text

“1 - See press release dated November 11, 2025 (1911 Gold Intersects up to 24.83 g/t Gold over 2.60 m on San Antonio West at the True North Project).”

Evidence · table

“Intercepts above a cut-off grade of 2.25 g/t Au”

Context: 1) 2) 3) 4) 5)

Evidence · table

“Intervals represent drill core length and are considered to represent 70% to 90% of true widths”

Context: 1) 2) 3) 4) 5)

Evidence · text

“The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls (QA/QC) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. (Actlabs), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis (Screen Metallic Sieve) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada.”