# 1911 Gold Reports High-Grade Intercepts from the SAM W Target at True North of 11.31 g/t Au over 1.70 m and 6.79 g/t Au over 2.40 m Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a Original source: https://money.tmx.com/en/quote/AUMB/news/5158567981352529/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1 Publisher: tmx Original announcement: 2026-08-25T11:02:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: 1911 Gold Corporation - Ticker: AUMB - Exchange: TSX - Region: Manitoba, Canada - Primary commodity: Gold - Secondary commodities: None reported - Document categories: Drill results - Extracted: 2026-09-17 10:35:40 UTC Narrative sentiment: 0.60 · Bullish ## Minestarters Atlas summary 1911 Gold announced high-grade gold drill results from its SAM W target at the True North Gold Project in Manitoba, Canada. Key intercepts include 11.31 g/t Au over 1.70 m and 6.79 g/t Au over 2.40 m. The drilling confirmed continuity of mineralization over 500 m strike length and to over 600 m depth, with results intended to support a maiden mineral resource estimate for the target. The company provided detailed QA/QC and compositing parameters. Reasoning: The announcement reports high-grade gold intercepts from the SAM W target at the True North Gold Project, confirming continuity and extending mineralization. These results are significant for advancing the project towards a maiden resource estimate. While grades are exceptional, widths are narrow. Comprehensive QA/QC and compositing details are provided. - Positive factor: High-grade gold intercepts, with several exceeding the exceptional threshold for orogenic gold deposits. - Positive factor: Drilling confirmed continuity of mineralization over a significant strike length and to depth, expanding the known mineralized footprint. - Positive factor: Results will support a maiden mineral resource estimate for the SAM W target, indicating progress towards resource definition. - Positive factor: Comprehensive QA/QC disclosure, including QP sign-off, certified labs, and specific methods \(blanks, standards, duplicates, check assays\). - Positive factor: Clear disclosure of cut-off grade and internal dilution rules for compositing. - Negative factor: Intercepts are relatively narrow, leading to lower grade-thickness products despite high grades. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure for each intercept, introducing some uncertainty. - Negative factor: The program is a mix of exploration and resource definition, meaning some results are not purely infill for immediate resource conversion. Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 42 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 42. Some facts used in scoring do not have a stored record. ## Drill Results (42) ### TN-26-073 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-0) True North · gold #### Identity - Hole ID: TN-26-073 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 11.31 - Grade Unit: g/t - Intercept: 1.7 m - From: 391.1 m - To: 392.8 m - Hole Depth: 470 m - Intercept Depth: 391.1 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-073:391.1-392.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311854 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 263 m - Azimuth: 170 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: High-grade gold intercept from the current drill program, contributing to the understanding of the SAM W target. The grade is exceptional for orogenic gold, though the width is narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(11.31 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Relatively narrow intercept length \(1.70 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 11.31 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 11.31 Context: 1.70 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-073 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-1) True North · gold #### Identity - Hole ID: TN-26-073 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 16.2 - Grade Unit: g/t - Intercept: 0.8 m - From: 392 m - To: 392.8 m - Hole Depth: 470 m - Intercept Depth: 391.1 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-073:392-392.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311854 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 263 m - Azimuth: 170 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: Very high-grade gold sub-interval within TN-26-073, further enhancing the significance of the overall intercept. The grade is well into the bonanza category for orogenic gold, but the width is very narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(16.20 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Very narrow intercept length \(0.80 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 16.20 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 16.20 Context: 0.80 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-077 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-2) True North · gold #### Identity - Hole ID: TN-26-077 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.47 - Grade Unit: g/t - Intercept: 2.4 m - From: 338.8 m - To: 341.2 m - Hole Depth: 400 m - Intercept Depth: 338.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-077:338.8-341.2 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 265 m - Azimuth: 226 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-077 shows a low gold grade, falling below the weak threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.47 g/t Au\) below the weak threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-077 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-3) True North · gold #### Identity - Hole ID: TN-26-077 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.87 - Grade Unit: g/t - Intercept: 1.1 m - From: 348.9 m - To: 350 m - Hole Depth: 400 m - Intercept Depth: 338.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-077:348.9-350 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 265 m - Azimuth: 226 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-077 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.87 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-082 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-4) True North · gold #### Identity - Hole ID: TN-26-082 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 6.79 - Grade Unit: g/t - Intercept: 2.4 m - From: 204.4 m - To: 206.8 m - Hole Depth: 391 m - Intercept Depth: 204.4 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-082:204.4-206.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 205 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: High-grade gold intercept from the current drill program, contributing to the understanding of the SAM W target. The grade is exceptional for orogenic gold, though the width is narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(6.79 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Relatively narrow intercept length \(2.40 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 6.79 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 6.79 Context: 2.40 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-082 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-5) True North · gold #### Identity - Hole ID: TN-26-082 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 7.98 - Grade Unit: g/t - Intercept: 1.4 m - From: 205.4 m - To: 206.8 m - Hole Depth: 391 m - Intercept Depth: 204.4 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-082:205.4-206.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 205 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: High-grade gold sub-interval within TN-26-082, further enhancing the significance of the overall intercept. The grade is exceptional for orogenic gold, though the width is narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(7.98 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Relatively narrow intercept length \(1.40 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 7.98 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 7.98 Context: 1.40 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-082 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-6) True North · gold #### Identity - Hole ID: TN-26-082 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 3.82 - Grade Unit: g/t - Intercept: 1 m - From: 351 m - To: 352 m - Hole Depth: 391 m - Intercept Depth: 204.4 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-082:351-352 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 205 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-082 shows a strong gold grade, above the stated cut-off for significant intercepts, but over a very narrow width. QA/QC and compositing are well-disclosed. - Positive factor: Strong gold grade \(3.82 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Very narrow intercept length \(1.00 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-7) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.95 - Grade Unit: g/t - Intercept: 0.7 m - From: 51.5 m - To: 52.2 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:51.5-52.2 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.95 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-8) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 3.74 - Grade Unit: g/t - Intercept: 0.8 m - From: 52.2 m - To: 53 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:52.2-53 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a strong gold grade, above the stated cut-off for significant intercepts, but over a very narrow width. QA/QC and compositing are well-disclosed. - Positive factor: Strong gold grade \(3.74 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Very narrow intercept length \(0.80 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-9) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.95 - Grade Unit: g/t - Intercept: 1.1 m - From: 57.9 m - To: 59 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:57.9-59 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.95 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-10) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.66 - Grade Unit: g/t - Intercept: 0.8 m - From: 272.2 m - To: 273 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:272.2-273 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.66 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-11) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.58 - Grade Unit: g/t - Intercept: 0.9 m - From: 300.8 m - To: 301.7 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:300.8-301.7 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.58 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-12) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.37 - Grade Unit: g/t - Intercept: 1.2 m - From: 320 m - To: 321.2 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:320-321.2 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.37 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-13) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.94 - Grade Unit: g/t - Intercept: 0.7 m - From: 325.8 m - To: 326.5 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:325.8-326.5 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.94 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-14) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 5.72 - Grade Unit: g/t - Intercept: 3 m - From: 327.4 m - To: 330.4 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:327.4-330.4 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: High-grade gold intercept from the current drill program, contributing to the understanding of the SAM W target. The grade is exceptional for orogenic gold, though the width is narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(5.72 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Relatively narrow intercept length \(3.00 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 5.72 g/t Au is above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 5.72 Context: 3.00 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-15) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 9.65 - Grade Unit: g/t - Intercept: 1.1 m - From: 329.3 m - To: 330.4 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:329.3-330.4 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: High-grade gold sub-interval within TN-26-089, further enhancing the significance of the overall intercept. The grade is exceptional for orogenic gold, though the width is narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(9.65 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Relatively narrow intercept length \(1.10 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 9.65 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 9.65 Context: 1.10 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-089 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-16) True North · gold #### Identity - Hole ID: TN-26-089 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.07 - Grade Unit: g/t - Intercept: 0.9 m - From: 331.8 m - To: 332.7 m - Hole Depth: 391 m - Intercept Depth: 51.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-089:331.8-332.7 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656268 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 168 ° - Dip: -65 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-089 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.07 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has. been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-092 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-17) True North · gold #### Identity - Hole ID: TN-26-092 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.54 - Grade Unit: g/t - Intercept: 1 m - From: 92.8 m - To: 93.8 m - Hole Depth: 448 m - Intercept Depth: 92.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-092:92.8-93.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 130 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-092 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.54 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-092 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-18) True North · gold #### Identity - Hole ID: TN-26-092 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 0.58 - Grade Unit: g/t - Intercept: 2 m - From: 97.2 m - To: 99.2 m - Hole Depth: 448 m - Intercept Depth: 92.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-092:97.2-99.2 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 130 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-092 shows a low gold grade, falling below the moderate threshold for orogenic gold and the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Low gold grade \(0.58 g/t Au\) below the moderate threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-092 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-19) True North · gold #### Identity - Hole ID: TN-26-092 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 2.17 - Grade Unit: g/t - Intercept: 1.2 m - From: 384.6 m - To: 385.8 m - Hole Depth: 448 m - Intercept Depth: 92.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-092:384.6-385.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 130 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-092 shows a moderate gold grade, just below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Moderate gold grade \(2.17 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-092 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-20) True North · gold #### Identity - Hole ID: TN-26-092 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 3.29 - Grade Unit: g/t - Intercept: 1 m - From: 390.7 m - To: 391.7 m - Hole Depth: 448 m - Intercept Depth: 92.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-092:390.7-391.7 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 130 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-092 shows a strong gold grade, above the stated cut-off for significant intercepts, but over a very narrow width. QA/QC and compositing are well-disclosed. - Positive factor: Strong gold grade \(3.29 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Very narrow intercept length \(1.00 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-092 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-21) True North · gold #### Identity - Hole ID: TN-26-092 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 2.2 - Grade Unit: g/t - Intercept: 0.6 m - From: 400.4 m - To: 401 m - Hole Depth: 448 m - Intercept Depth: 92.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-092:400.4-401 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 130 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-092 shows a moderate gold grade, just below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(2.20 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-092 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-22) True North · gold #### Identity - Hole ID: TN-26-092 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 2.02 - Grade Unit: g/t - Intercept: 0.6 m - From: 403.5 m - To: 404.1 m - Hole Depth: 448 m - Intercept Depth: 92.8 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-092:403.5-404.1 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311852 - Northing: 5656269 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 130 ° - Dip: -67 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-092 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(2.02 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-096 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-23) True North · gold #### Identity - Hole ID: TN-26-096 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 2.15 - Grade Unit: g/t - Intercept: 0.8 m - From: 67.4 m - To: 68.2 m - Hole Depth: 439 m - Intercept Depth: 67.4 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-096:67.4-68.2 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656271 - CRS: UTM NAD83 Zone 15 - Elevation: 263 m - Azimuth: 109 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-096 shows a moderate gold grade, just below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(2.15 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-096 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-24) True North · gold #### Identity - Hole ID: TN-26-096 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.03 - Grade Unit: g/t - Intercept: 0.5 m - From: 392.8 m - To: 393.3 m - Hole Depth: 439 m - Intercept Depth: 67.4 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-096:392.8-393.3 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656271 - CRS: UTM NAD83 Zone 15 - Elevation: 263 m - Azimuth: 109 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-096 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.03 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-096 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-25) True North · gold #### Identity - Hole ID: TN-26-096 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.45 - Grade Unit: g/t - Intercept: 0.8 m - From: 396 m - To: 396.8 m - Hole Depth: 439 m - Intercept Depth: 67.4 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-096:396-396.8 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311853 - Northing: 5656271 - CRS: UTM NAD83 Zone 15 - Elevation: 263 m - Azimuth: 109 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-096 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.45 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-26) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.27 - Grade Unit: g/t - Intercept: 0.9 m - From: 57 m - To: 57.9 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:57-57.9 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-097 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.27 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-27) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.3 - Grade Unit: g/t - Intercept: 0.6 m - From: 82.8 m - To: 83.4 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:82.8-83.4 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-097 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.30 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-28) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.69 - Grade Unit: g/t - Intercept: 1.2 m - From: 358.8 m - To: 360 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:358.8-360 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-097 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.69 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-29) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.37 - Grade Unit: g/t - Intercept: 0.5 m - From: 360.9 m - To: 361.4 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:360.9-361.4 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-097 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.37 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-30) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 11.8 - Grade Unit: g/t - Intercept: 0.5 m - From: 361.4 m - To: 361.9 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:361.4-361.9 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: High-grade gold intercept from the current drill program, contributing to the understanding of the SAM W target. The grade is exceptional for orogenic gold, though the width is very narrow. QA/QC and compositing are well-disclosed. - Positive factor: Exceptional gold grade \(11.80 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Very narrow intercept length \(0.50 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 11.80 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · table > 11.80 Context: 0.50 **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-31) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 2.4 - Grade Unit: g/t - Intercept: 0.8 m - From: 363.6 m - To: 364.4 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:363.6-364.4 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-097 shows a moderate gold grade, above the stated cut-off for significant intercepts, but over a narrow width. QA/QC and compositing are well-disclosed. - Positive factor: Moderate gold grade \(2.40 g/t Au\) for an orogenic deposit. - Positive factor: Part of a program confirming continuity and extending mineralization. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Relatively narrow intercept length \(0.80 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-26-097 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-32) True North · gold #### Identity - Hole ID: TN-26-097 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 1.16 - Grade Unit: g/t - Intercept: 1.3 m - From: 364.9 m - To: 366.2 m - Hole Depth: 416 m - Intercept Depth: 57 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-26-097:364.9-366.2 - Mining Method: mixed #### Location - Location: SAM W - Easting: 311851 - Northing: 5656270 - CRS: UTM NAD83 Zone 15 - Elevation: 264 m - Azimuth: 145 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This intercept from TN-26-097 shows a moderate gold grade, below the stated cut-off for significant intercepts. While part of the overall program, it is not a material result on its own. - Positive factor: Comprehensive QA/QC and compositing details disclosed. - Negative factor: Moderate gold grade \(1.16 g/t Au\) below the strong threshold for orogenic gold deposits. - Negative factor: Below the stated cut-off grade of 2.25 g/t Au for significant intercepts. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. #### Tags used in scoring **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-25-064 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-33) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-25-064 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 24.83 - Grade Unit: g/t - Intercept: 2.6 m - From: 490 m - To: 492.6 m - Intercept Depth: 490 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-25-064:490-492.6 - Mining Method: mixed #### Location - Location: San Antonio West - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-11-11T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold intercept from the San Antonio West target, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(24.83 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Relatively narrow intercept length \(2.60 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 24.83 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > TN-25-064¹ which intersected 24.83 g/t Au over 2.60 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on November 11, 2025, and is re-announced here for context. Evidence · text > 1 - See press release dated November 11, 2025 \(1911 Gold Intersects up to 24.83 g/t Gold over 2.60 m on San Antonio West at the True North Project\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-25-064 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-34) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-25-064 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 46 - Grade Unit: g/t - Intercept: 1 m - From: 490 m - To: 491 m - Intercept Depth: 490 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-25-064:490-491 - Mining Method: mixed #### Location - Location: San Antonio West - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-11-11T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold sub-interval within TN-25-064, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(46.00 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Very narrow intercept length \(1.00 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 46.00 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > including 46.00 g/t Au over 1.00 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on November 11, 2025, and is re-announced here for context. Evidence · text > 1 - See press release dated November 11, 2025 \(1911 Gold Intersects up to 24.83 g/t Gold over 2.60 m on San Antonio West at the True North Project\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-25-071 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-35) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-25-071 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 12.8 - Grade Unit: g/t - Intercept: 0.8 m - From: 473.5 m - To: 474.3 m - Intercept Depth: 473.5 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-25-071:473.5-474.3 - Mining Method: mixed #### Location - Location: San Antonio West - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-11-11T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold intercept from the San Antonio West target, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(12.80 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Very narrow intercept length \(0.80 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 12.80 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > TN-25-071¹ which intersected 12.80 g/t Au over 0.80 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on November 11, 2025, and is re-announced here for context. Evidence · text > 1 - See press release dated November 11, 2025 \(1911 Gold Intersects up to 24.83 g/t Gold over 2.60 m on San Antonio West at the True North Project\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-24-006 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-36) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-24-006 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 3.7 - Grade Unit: g/t - Intercept: 4.84 m - From: 125.38 m - To: 130.22 m - Intercept Depth: 125.38 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-24-006:125.38-130.22 - Mining Method: mixed #### Location - Location: SAM W - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-02-04T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, strong-grade gold intercept from the SAM W target, mentioned for comparative purposes. While the grade is strong, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Strong historical gold grade \(3.70 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on February 4, 2025, and is re-announced here for context. Evidence · text > 2 - See press release dated February 4, 2025 \(1911 Gold Intersects 8.42 g/t Gold over 0.91 m and 7.23 g/t Gold over 1.05 m in Drilling at True North\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-24-006 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-37) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-24-006 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 7.23 - Grade Unit: g/t - Intercept: 1.05 m - From: 125.38 m - To: 126.43 m - Intercept Depth: 125.38 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-24-006:125.38-126.43 - Mining Method: mixed #### Location - Location: SAM W - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-02-04T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold sub-interval within TN-24-006, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(7.23 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Relatively narrow intercept length \(1.05 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 7.23 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > including 7.23 g/t Au over 1.05 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on February 4, 2025, and is re-announced here for context. Evidence · text > 2 - See press release dated February 4, 2025 \(1911 Gold Intersects 8.42 g/t Gold over 0.91 m and 7.23 g/t Gold over 1.05 m in Drilling at True North\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-24-006 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-38) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-24-006 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 8.42 - Grade Unit: g/t - Intercept: 0.91 m - From: 125.38 m - To: 126.29 m - Intercept Depth: 125.38 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-24-006:125.38-126.29 - Mining Method: mixed #### Location - Location: SAM W - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-02-04T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold sub-interval within TN-24-006, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(8.42 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Very narrow intercept length \(0.91 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 8.42 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > and 8.42 g/t Au over 0.91 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on February 4, 2025, and is re-announced here for context. Evidence · text > 2 - See press release dated February 4, 2025 \(1911 Gold Intersects 8.42 g/t Gold over 0.91 m and 7.23 g/t Gold over 1.05 m in Drilling at True North\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-25-057 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-39) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-25-057 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 58.66 - Grade Unit: g/t - Intercept: 1.4 m - From: 145 m - To: 146.4 m - Intercept Depth: 145 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-25-057:145-146.4 - Mining Method: mixed #### Location - Location: San Antonio West Zone - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-06-10T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold intercept from the San Antonio West Zone, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(58.66 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Relatively narrow intercept length \(1.40 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 58.66 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > TN-25-057³ which intersected 58.66 g/t Au over 1.40 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on June 10, 2025, and is re-announced here for context. Evidence · text > 3 - See press release dated June 10, 2025 \(1911 Gold Intersects up to 58.66 g/t Gold over 1.40 m on San Antonio West Zone at True North\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-25-057 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-40) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-25-057 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 63.2 - Grade Unit: g/t - Intercept: 0.9 m - From: 145 m - To: 145.9 m - Intercept Depth: 145 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-25-057:145-145.9 - Mining Method: mixed #### Location - Location: San Antonio West Zone - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-06-10T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold sub-interval within TN-25-057, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(63.20 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Very narrow intercept length \(0.90 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 63.20 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > including 63.20 g/t Au over 0.90 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on June 10, 2025, and is re-announced here for context. Evidence · text > 3 - See press release dated June 10, 2025 \(1911 Gold Intersects up to 58.66 g/t Gold over 1.40 m on San Antonio West Zone at True North\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ### TN-25-057 [Link to this fact](https://atlas-extractions.minestarters.com/news/1911-gold-reports-high-grade-intercepts-from-the-sam-w-target-at-true-north-of-1--cb2e1a47-b1c9-43ff-9d67-bbeb1e1ce37a#fact-drill-facts-41) True North · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: TN-25-057 - Project: True North - Commodity: gold - Region: canada\_mb - Reported Region: canada\_mb - Ticker: AUMB #### Geometry - Grade: 50.5 - Grade Unit: g/t - Intercept: 0.5 m - From: 145 m - To: 145.5 m - Intercept Depth: 145 m #### Classification - Deposit Type: orogenic - Program: mixed - Sample Type: drill - Group ID: TN-25-057:145-145.5 - Mining Method: mixed #### Location - Location: San Antonio West Zone - Loc. Source: document #### QA/QC - Laboratory: Activation Laboratories Ltd. \(Actlabs\) and ALS-Chemex Laboratory - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: blanks #### Compositing - Cutoff Grade: 2.25 - Cutoff Unit: g/t Au - Dilution Disclosed: Yes - Max Dilution: 2.5 m #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2025-06-10T00:00:00.000Z #### Dates - Event date: 2026-08-25T00:00:00.000Z Reasoning: This is a historical, very high-grade gold sub-interval within TN-25-057, mentioned for comparative purposes. While the grade is exceptional, it is not new information. QA/QC and compositing details are inferred from the current release's general disclosure. - Positive factor: Exceptional historical gold grade \(50.50 g/t Au\) for an orogenic deposit. - Positive factor: Comprehensive QA/QC and compositing details disclosed in the current release. - Negative factor: Very narrow intercept length \(0.50 m\). - Negative factor: True width is estimated as a range \(70-90%\) rather than a precise figure. - Negative factor: This is a historical result, not new information. #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The grade of 50.50 g/t Au is well above the exceptional threshold of 5 g/t Au for orogenic gold deposits. Evidence · text > and 50.50 g/t Au over 0.50 m **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: This result was previously announced on June 10, 2025, and is re-announced here for context. Evidence · text > 3 - See press release dated June 10, 2025 \(1911 Gold Intersects up to 58.66 g/t Gold over 1.40 m on San Antonio West Zone at True North\). **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: The cut-off grade of 2.25 g/t Au and maximum internal dilution of 2.50 m are clearly stated for reported intervals. Evidence · table > Intercepts above a cut-off grade of 2.25 g/t Au Context: 1\) 2\) 3\) 4\) 5\) **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Intervals are reported as drill core length and considered to represent 70% to 90% of true widths, but no specific true width is given. Evidence · table > Intervals represent drill core length and are considered to represent 70% to 90% of true widths Context: 1\) 2\) 3\) 4\) 5\) **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The release details QP sign-off, certified labs, and specific QA/QC methods like blanks, standards, duplicates, and check assays. Evidence · text > The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, P.Geo., Vice-President Exploration of 1911 Gold Corporation, who is a “Qualified Person” as defined under NI 43-101. Quality Assurance/Quality Controls \(QA/QC\) Oriented core samples are collected by sawing the drill core in half along its axis; one half is sampled, placed in plastic sample bags, labelled and sealed, and the other half is retained for future reference. Batches are shipped to Activation Laboratories Ltd. \(Actlabs\), in Thunder Bay, Ontario, for sample preparation and analysis. Samples are dried, crushed to 2 mm and a 1 kg split is pulverized to -200 mesh. Gold analysis is completed by fire assay with an atomic absorption finish on 50 grams of prepared pulp. Samples returning values equal to or greater than 10.00 g/t Au are re-analyzed by fire assay with a gravimetric finish. Total gold analysis \(Screen Metallic Sieve\) is conducted on highly mineralized samples or samples containing visible gold. Certified gold reference material samples are inserted every 20 samples and blank samples at intervals of one in every 50 samples, with additional blanks inserted after samples hosting visible gold. Repeat third-party gold analyses are conducted on 5% of all submitted sample pulps at ALS-Chemex Laboratory, North Vancouver, Canada. ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.