# Abasca Resources Announces Completion of Winter Exploration Program and Arrangement of Non-Brokered Private Placement of up to $2.5 Million Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990 Original source: https://money.tmx.com/en/quote/ABA/news/4543032085232397/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem Publisher: tmx Original announcement: 2026-04-14T11:00:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Abasca Resources Inc. - Ticker: ABA - Exchange: TSX - Region: Saskatchewan - Primary commodity: Graphite - Secondary commodities: Sulfur - Document categories: Drill results, Capital raise, Resource update - Extracted: 2026-09-19 07:34:51 UTC Narrative sentiment: 0.40 · Bullish ## Minestarters Atlas summary Abasca Resources announced the completion of its Winter 2026 exploration program at the Loki Flake Graphite Deposit in northern Saskatchewan, successfully extending the deposit's strike length by 200 meters and confirming graphite mineralization at the Thor Zone. The company also arranged a non-brokered private placement of up to $2.5 million to fund ongoing exploration. Drill results include several high-grade graphite intercepts, though true widths were not reported. Reasoning: The announcement reports positive drill results extending the Loki Deposit and confirming mineralization at the Thor Zone, supported by disclosed QA/QC. The private placement provides funding for continued exploration. However, the lack of true width disclosure for intercepts and the historical nature of the resource estimate temper the overall positive sentiment. - Positive factor: Successful extension of the Loki Deposit by 200 m of strike-length, indicating growth potential. - Positive factor: Confirmation of continuity of graphite mineralization at the Thor Zone. - Positive factor: High-grade graphite intercepts, with several exceeding 5% Cg. - Positive factor: QA/QC procedures are disclosed, including use of an ISO/IEC 17025:2017 accredited lab and insertion of blanks, standards, and repeats. - Positive factor: The private placement secures funding for ongoing exploration. - Negative factor: Drill intercepts are reported as downhole lengths, with no true width provided, which may overstate true thickness. - Negative factor: The resource estimate mentioned is historical \(2025\) and inferred, not a new update. Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 41 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 40. Some facts used in scoring do not have a stored record. ## Drill Results (39) ### KLS-26-104 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-2) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-104 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 5.38 - Grade Unit: % - Intercept: 6 m - From: 59 m - To: 65 m - Hole Depth: 126 m - Intercept Depth: 59 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-104:59-65 - Mining Method: unknown #### Location - Easting: 446138 - Northing: 6329963 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 548 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a moderate length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(5.38% Cg\) for flake graphite deposits. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 5.38 Context: 6.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-104 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-3) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-104 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 6 m - From: 59 m - To: 65 m - Hole Depth: 126 m - Intercept Depth: 59 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-104:59-65 - Mining Method: unknown #### Location - Easting: 446138 - Northing: 6329963 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 548 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.06 Context: 6.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-104 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-4) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-104 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 6.51 - Grade Unit: % - Intercept: 6 m - From: 69 m - To: 75 m - Hole Depth: 126 m - Intercept Depth: 69 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-104:69-75 - Mining Method: unknown #### Location - Easting: 446138 - Northing: 6329963 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 548 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a strong grade over a moderate length, contributing positively to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(6.51% Cg\) for flake graphite deposits. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 6.51 Context: 6.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-104 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-5) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-104 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 6 m - From: 69 m - To: 75 m - Hole Depth: 126 m - Intercept Depth: 69 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-104:69-75 - Mining Method: unknown #### Location - Easting: 446138 - Northing: 6329963 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 548 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.16 Context: 6.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-6) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 3.3 - Grade Unit: % - Intercept: 1 m - From: 87 m - To: 88 m - Hole Depth: 195 m - Intercept Depth: 87 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:87-88 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 3.30 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-7) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.28 - Grade Unit: % - Intercept: 1 m - From: 87 m - To: 88 m - Hole Depth: 195 m - Intercept Depth: 87 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:87-88 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 0.28 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-8) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 4.38 - Grade Unit: % - Intercept: 17 m - From: 102 m - To: 119 m - Hole Depth: 195 m - Intercept Depth: 102 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:102-119 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a significant length, contributing positively to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: Good grade and significant intercept length \(17m\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 4.38 Context: 17.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-9) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.32 - Grade Unit: % - Intercept: 17 m - From: 102 m - To: 119 m - Hole Depth: 195 m - Intercept Depth: 102 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:102-119 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.32 Context: 17.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. Evidence · text > Composite intervals are calculated using a 3.0 % Cg cut-off and may include a maximum of 2.0 m internal dilution. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-10) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 5.04 - Grade Unit: % - Intercept: 3 m - From: 122 m - To: 125 m - Hole Depth: 195 m - Intercept Depth: 122 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:122-125 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(5.04% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 5.04 Context: 3.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-11) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.38 - Grade Unit: % - Intercept: 3 m - From: 122 m - To: 125 m - Hole Depth: 195 m - Intercept Depth: 122 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:122-125 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 0.38 Context: 3.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-12) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 5.02 - Grade Unit: % - Intercept: 7 m - From: 133 m - To: 140 m - Hole Depth: 195 m - Intercept Depth: 133 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:133-140 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a moderate length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(5.02% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 5.02 Context: 7.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-105 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-13) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-105 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.96 - Grade Unit: % - Intercept: 7 m - From: 133 m - To: 140 m - Hole Depth: 195 m - Intercept Depth: 133 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-105:133-140 - Mining Method: unknown #### Location - Easting: 446089 - Northing: 6329887 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 546 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.96 Context: 7.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-14) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 3.61 - Grade Unit: % - Intercept: 1 m - From: 122 m - To: 123 m - Hole Depth: 252 m - Intercept Depth: 122 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:122-123 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 3.61 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-15) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.6 - Grade Unit: % - Intercept: 1 m - From: 122 m - To: 123 m - Hole Depth: 252 m - Intercept Depth: 122 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:122-123 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 0.60 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-16) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 3.2 - Grade Unit: % - Intercept: 2 m - From: 128 m - To: 130 m - Hole Depth: 252 m - Intercept Depth: 128 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:128-130 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 3.20 Context: 2.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-17) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.39 - Grade Unit: % - Intercept: 2 m - From: 128 m - To: 130 m - Hole Depth: 252 m - Intercept Depth: 128 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:128-130 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 0.39 Context: 2.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-18) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 4.58 - Grade Unit: % - Intercept: 6 m - From: 178 m - To: 184 m - Hole Depth: 252 m - Intercept Depth: 178 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:178-184 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a moderate length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: Good grade graphite intercept \(4.58% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 4.58 Context: 6.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-19) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.61 - Grade Unit: % - Intercept: 6 m - From: 178 m - To: 184 m - Hole Depth: 252 m - Intercept Depth: 178 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:178-184 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.61 Context: 6.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-20) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 3.69 - Grade Unit: % - Intercept: 5 m - From: 187 m - To: 192 m - Hole Depth: 252 m - Intercept Depth: 187 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:187-192 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a moderate grade over a moderate length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 3.69 Context: 5.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-21) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.67 - Grade Unit: % - Intercept: 5 m - From: 187 m - To: 192 m - Hole Depth: 252 m - Intercept Depth: 187 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:187-192 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.67 Context: 5.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-22) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 6.68 - Grade Unit: % - Intercept: 16 m - From: 197 m - To: 213 m - Hole Depth: 252 m - Intercept Depth: 197 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:197-213 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a strong grade over a significant length, contributing positively to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(6.68% Cg\) over a significant length \(16m\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 6.68 Context: 16.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-106 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-23) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-106 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 1.34 - Grade Unit: % - Intercept: 16 m - From: 197 m - To: 213 m - Hole Depth: 252 m - Intercept Depth: 197 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-106:197-213 - Mining Method: unknown #### Location - Easting: 446027 - Northing: 6329795 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 540 m - Azimuth: 35 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 1.34 Context: 16.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-107 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-24) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-107 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 3.08 - Grade Unit: % - Intercept: 1 m - From: 198 m - To: 199 m - Hole Depth: 308 m - Intercept Depth: 198 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-107:198-199 - Mining Method: unknown #### Location - Easting: 445976 - Northing: 6329716 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 539 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 3.08 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-107 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-25) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-107 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.39 - Grade Unit: % - Intercept: 1 m - From: 198 m - To: 199 m - Hole Depth: 308 m - Intercept Depth: 198 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-107:198-199 - Mining Method: unknown #### Location - Easting: 445976 - Northing: 6329716 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 539 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 0.39 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-107 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-26) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-107 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 4.89 - Grade Unit: % - Intercept: 23.1 m - From: 215.9 m - To: 239 m - Hole Depth: 308 m - Intercept Depth: 215.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-107:215.9-239 - Mining Method: unknown #### Location - Easting: 445976 - Northing: 6329716 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 539 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a significant length, contributing positively to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: Good grade graphite intercept \(4.89% Cg\) over a significant length \(23.1m\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 4.89 Context: 23.10 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-107 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-27) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-107 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.73 - Grade Unit: % - Intercept: 23.1 m - From: 215.9 m - To: 239 m - Hole Depth: 308 m - Intercept Depth: 215.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-107:215.9-239 - Mining Method: unknown #### Location - Easting: 445976 - Northing: 6329716 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 539 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.73 Context: 23.10 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-107 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-28) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-107 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 6.28 - Grade Unit: % - Intercept: 12.5 m - From: 242 m - To: 254.5 m - Hole Depth: 308 m - Intercept Depth: 242 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-107:242-254.5 - Mining Method: unknown #### Location - Easting: 445976 - Northing: 6329716 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 539 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a strong grade over a significant length, contributing positively to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(6.28% Cg\) over a significant length \(12.5m\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 6.28 Context: 12.50 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-107 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-29) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-107 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 1.31 - Grade Unit: % - Intercept: 12.5 m - From: 242 m - To: 254.5 m - Hole Depth: 308 m - Intercept Depth: 242 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-107:242-254.5 - Mining Method: unknown #### Location - Easting: 445976 - Northing: 6329716 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 539 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 1.31 Context: 12.50 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-108 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-30) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-108 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 5.1 - Grade Unit: % - Intercept: 0.8 m - From: 37.2 m - To: 38 m - Hole Depth: 141 m - Intercept Depth: 37.2 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-108:37.2-38 - Mining Method: unknown #### Location - Easting: 446202 - Northing: 6329878 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 538 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a very narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(5.10% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Very narrow intercept length. Evidence · table > 5.10 Context: 0.80 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-108 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-31) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-108 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 5.53 - Grade Unit: % - Intercept: 1 m - From: 56 m - To: 57 m - Hole Depth: 141 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-108:56-57 - Mining Method: unknown #### Location - Easting: 446202 - Northing: 6329878 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 538 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(5.53% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 5.53 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-32) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-109 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 3.22 - Grade Unit: % - Intercept: 1 m - From: 45 m - To: 46 m - Hole Depth: 176 m - Intercept Depth: 45 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-109:45-46 - Mining Method: unknown #### Location - Easting: 446176 - Northing: 6329821 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 537 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 3.22 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-33) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-109 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.44 - Grade Unit: % - Intercept: 1 m - From: 45 m - To: 46 m - Hole Depth: 176 m - Intercept Depth: 45 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-109:45-46 - Mining Method: unknown #### Location - Easting: 446176 - Northing: 6329821 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 537 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 0.44 Context: 1.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-34) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-109 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 4.59 - Grade Unit: % - Intercept: 2 m - From: 68 m - To: 70 m - Hole Depth: 176 m - Intercept Depth: 68 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-109:68-70 - Mining Method: unknown #### Location - Easting: 446176 - Northing: 6329821 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 537 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a narrow length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. - Negative factor: Narrow intercept length. Evidence · table > 4.59 Context: 2.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-35) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-110 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 5.91 - Grade Unit: % - Intercept: 5.7 m - From: 123.3 m - To: 129 m - Hole Depth: 185 m - Intercept Depth: 123.3 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-110:123.3-129 - Mining Method: unknown #### Location - Easting: 446114 - Northing: 6329736 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 541 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a moderate length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: High-grade graphite intercept \(5.91% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 5.91 Context: 5.70 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-36) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-110 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.18 - Grade Unit: % - Intercept: 5.7 m - From: 123.3 m - To: 129 m - Hole Depth: 185 m - Intercept Depth: 123.3 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-110:123.3-129 - Mining Method: unknown #### Location - Easting: 446114 - Northing: 6329736 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 541 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.18 Context: 5.70 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-37) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-110 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 4.63 - Grade Unit: % - Intercept: 8 m - From: 136 m - To: 144 m - Hole Depth: 185 m - Intercept Depth: 136 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-110:136-144 - Mining Method: unknown #### Location - Easting: 446114 - Northing: 6329736 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 541 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a moderate length, contributing to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: Good grade graphite intercept \(4.63% Cg\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 4.63 Context: 8.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-38) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-110 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.3 - Grade Unit: % - Intercept: 8 m - From: 136 m - To: 144 m - Hole Depth: 185 m - Intercept Depth: 136 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-110:136-144 - Mining Method: unknown #### Location - Easting: 446114 - Northing: 6329736 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 541 m - Azimuth: 35 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.30 Context: 8.00 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-111 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-39) Loki Flake Graphite Deposit · graphite #### Identity - Hole ID: KLS-26-111 - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 4.88 - Grade Unit: % - Intercept: 19.5 m - From: 216.5 m - To: 236 m - Hole Depth: 323 m - Intercept Depth: 216.5 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-111:216.5-236 - Mining Method: unknown #### Location - Easting: 446042 - Northing: 6329642 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 541 m - Azimuth: 35 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: This intercept shows a good grade over a significant length, contributing positively to the deposit's extension. QA/QC is disclosed, but true width is not. - Positive factor: Good grade graphite intercept \(4.88% Cg\) over a significant length \(19.5m\). - Positive factor: QA/QC procedures disclosed and lab is ISO/IEC 17025:2017 accredited. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 4.88 Context: 19.50 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ### KLS-26-111 [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-drill-facts-40) Loki Flake Graphite Deposit · sulfur #### Identity - Hole ID: KLS-26-111 - Project: Loki Flake Graphite Deposit - Commodity: sulfur - Region: canada\_sk - Reported Region: canada\_sk - Ticker: ABA #### Geometry - Grade: 0.89 - Grade Unit: % - Intercept: 19.5 m - From: 216.5 m - To: 236 m - Hole Depth: 323 m - Intercept Depth: 216.5 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: KLS-26-111:216.5-236 - Mining Method: unknown #### Location - Easting: 446042 - Northing: 6329642 - CRS: UTM NAD 83 Zone 13N - EPSG: 26913 - Elevation: 541 m - Azimuth: 35 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: SRC Geoanalytical Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Compositing - Cutoff Grade: 3 - Cutoff Unit: % Cg - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: Low sulfur grade, but reported as a byproduct. QA/QC is disclosed, but true width is not. - Negative factor: Apparent width only, true thickness not reported. Evidence · table > 0.89 Context: 19.50 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The document explicitly states that 'All lengths are as measured downhole and do not represent true thickness.' Evidence · text > All lengths are as measured downhole and do not represent true thickness. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Samples were sent to SRC Geoanalytical Laboratories, an independent laboratory accredited under ISO/IEC 17025:2017, and included insertion of blanks, standard reference materials, and repeats. Evidence · text > Collected samples were sent to SRC Geoanalytical Laboratories in Saskatoon, Saskatchewan, an independent laboratory accredited under ISO/IEC 17025:2017 for preparation and ICP-MS multi-element analysis, boron by fusion as well as graphite content \(% Cg\) and total sulphur by LECO. Samples were collected in accordance with industry-standard quality assurance / quality control practices and included the insertion of blanks, standard reference materials, and repeats into the sample stream at regular intervals. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Highlights Completed 4,922 m of drilling at the 100%-owned Loki Flake Graphite Deposit, Saskatchewan 4,517 m in 18 diamo" ## Resource Estimates (1) ### inferred [Link to this fact](https://atlas-extractions.minestarters.com/news/abasca-resources-announces-completion-of-winter-exploration-program-and-arrangem--100a7772-1efd-437f-bd0c-9241bbf70990#fact-resource-facts-1) Loki Flake Graphite Deposit · graphite Historical result Needs review: historical\_restatement #### Identity - Project: Loki Flake Graphite Deposit - Commodity: graphite - Region: canada\_sk - Reported Region: Saskatchewan - Ticker: ABA #### Resource scope - Estimate type: resource - Effective date: 2025-04-10T00:00:00.000Z - Reporting standards: ni\_43\_101 - QP Signed: Yes - Qualified person names: Brian McEwan - Resource group id: resource:0fde3d544be5cc4bf03d - Deposit or zone: Loki Flake Graphite #### Resource Data - Category: inferred - Tonnes: 11310000 - Grade: 7.65 - Grade Unit: % Cg #### Prior Estimate - Resource Date: 2025-04-10 #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Historical: Yes - Historical Source Date: 2025-05-29T00:00:00.000Z #### Dates - Event date: 2026-04-14T00:00:00.000Z Reasoning: The document references a substantial historical inferred resource, which provides a baseline but lacks the confidence of higher categories or a new update. - Positive factor: Significant inferred resource tonnage and grade for graphite. - Negative factor: The resource is entirely in the inferred category, indicating lower geological confidence. - Negative factor: The estimate is historical, not a new update in this release. Evidence · text > KLS is also host to the Loki Flake Graphite Deposit comprising a total inferred resource of 11.31 Mt at 7.65 % Cg. Please refer to the technical report dated May 29, 2025, with an effective date of April 10, 2025 and titled "Technical Report on the Key Lake South Project with Initial Mineral Resource Estimate for the Loki Flake Graphite Deposit, Saskatchewan, Canada", filed under the Company's profile on the SEDAR+ website, for further information about the resource estimate. #### Tags used in scoring **Inferred Resource** Polarity: negative Definition: Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone. Why it applies: The resource is described as 'a total inferred resource of 11.31 Mt at 7.65 % Cg'. Evidence · text > a total inferred resource of 11.31 Mt at 7.65 % Cg **All Inferred** Polarity: negative Definition: M&I share below the weak bound — very early stage, no engineering confidence. Why it applies: The resource is described as 'a total inferred resource of 11.31 Mt at 7.65 % Cg', indicating 100% inferred category. Evidence · text > a total inferred resource of 11.31 Mt at 7.65 % Cg **Stale Estimate** Polarity: negative Definition: Effective date is >2 years old — data currency concern, may not reflect current geological understanding. Why it applies: The effective date of the resource estimate is April 10, 2025, which is over a year old relative to the publication date of April 14, 2026. Evidence · text > effective date of April 10, 2025 **NI 43-101 Compliant** Polarity: positive Definition: Resource estimate prepared in compliance with NI 43-101 \(Canada\) — high reporting standard. Why it applies: The resource estimate refers to a 'technical report dated May 29, 2025, with an effective date of April 10, 2025 and titled "Technical Report on the Key Lake South Project with Initial Mineral Resource Estimate for the Loki Flake Graphite Deposit, Saskatchewan, Canada", filed under the Company's profile on the SEDAR+ website, for further information about the resource estimate.' This implies NI 43-101 compliance. Evidence · text > technical report dated May 29, 2025, with an effective date of April 10, 2025 and titled "Technical Report on the Key Lake South Project with Initial Mineral Resource Estimate for the Loki Flake Graphite Deposit, Saskatchewan, Canada", filed under the Company's profile on the SEDAR+ website **QP/CP Signed** Polarity: positive Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Why it applies: Brian McEwan, P.Geo., a Qualified Person as set out in National Instrument 43-101, reviewed and approved the technical information. Evidence · text > The technical information in this news release has been reviewed and approved by Brian McEwan, P.Geo., a Qualified Person as set out in National Instrument 43-101 - Standards of Disclosure for Mineral Projects. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **No Contained Metal** Polarity: negative Definition: Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting. Why it applies: contained\_metal was not reported **PEA-Supporting** Polarity: neutral Definition: Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study. Why it applies: the release names the study this estimate supports ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.