Abcourt Intersects 0.5 g/t Gold Over 153 Metres Including 10.9 g/t Gold Over 2.1 Metres in Drilling on Its Flordin Property
Original announcement by tmx on
- Company
- Abcourt Mines Inc.
- Ticker
- ABI
- Exchange
- TSX
- Region
- Québec
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-19 07:02:26 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Abcourt Mines Inc. announced significant gold drill results from its Flordin Property in Québec, including a high-grade intercept of 10.9 g/t gold over 2.1 metres within a broader zone of 0.5 g/t gold over 153 metres in the previously underexplored South Zone. The company also confirmed continuity of mineralization in the Cartwright area and extended the gold-bearing structure over 300 metres west in the Stripping 25-2 area. All drilling was conducted under a disclosed QA/QC program with an ISO-17025 accredited laboratory and QP sign-off.
Reasoning: The document reports significant gold drill results from the Flordin Property, particularly a long, high-grade intercept in the South Zone, which is highlighted as a new discovery area. Continuity is confirmed in other zones, and QA/QC is well-disclosed. While some grades are modest, the overall results are positive for exploration and project value.
Positive factors
- Significant gold intersection in the South Zone (153m at 0.5 g/t Au including 2.1m at 10.9 g/t Au) in a previously underexplored area, indicating potential for expansion.
- Confirmation of continuity of gold mineralization in the Cartwright area and extension to the west (Stripping 25-2).
- QA/QC procedures are disclosed, including use of blank samples, certified reference materials, and an ISO-17025 accredited lab (MSALABS) with QP sign-off.
- True width is estimated at approximately 80% of downhole length, providing better geological context.
Negative factors
- Some intercepts show modest grades, particularly in the Stripping 25-2 area.
- Two holes (FL-26-302 and FL-26-303) did not intercept significant gold values, though these are not detailed in the results table.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 14
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 10.9 g/t gold over 2.1 metres within a broader zone of 0.5 g/t gold over 153 metres is exceptionally high-grade for gold.
Evidence · text
“0.5 g/t gold over 153 metres including 10.9 g/t gold over 2.1 metres”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document states that the true width of the mineralized zones is interpreted at approximately 80% of the thickness along the core axis.
Evidence · text
“The true width of the mineralized zones is interpreted at approximately 80% of the thickness along the core axis.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC program with blank samples, certified reference materials, analysis by an ISO-17025 accredited lab (MSALABS), and sign-off by a Qualified Person.
Evidence · text
“Following an analytical quality assurance and quality control program, blank samples and certified reference materials were added to the NQ half core samples and were shipped and analyzed by the MSALABS laboratory in Val-d'Or, Quebec using the Photon Assay TM method. ... MSA is an ISO-17025 accredited laboratory for the photonic analysis method. The drilling, core description and assay preparation work was carried out under the supervision of Robert Gagnon, P.Geo., Vice-President of Exploration of Abcourt Mines, a Qualified Person as defined by NI 43-101 .”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling in the South Zone is described as testing its potential at an average depth of 200 metres in an area 'virtually unexplored to date', and the holes in Stripping 25-2 extended the gold-bearing structure more than 300 metres west.
Evidence · text
“The drill rig was then moved to the South Zone area to test its potential at an average depth of 200 metres. ... A mineralized envelope of such magnitude in an area that has been virtually unexplored to date significantly increases the value of the Flordin project and its South Zone. ... The four holes drilled in the area of stripping 25-2 extended the gold-bearing structure more than 300 metres west of the Cartwright Trench.”
Extracted facts
Stored fact records: 14. Some facts used in scoring do not have a stored record.
Drill Results (14)
FL-26-298Flordin · goldGrade: 0.3Grade Unit: g/tIntercept: 29.5 mView all detailsHide details
Identity
- Hole ID
- FL-26-298
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 29.5 m
- True Width
- 23.6 m
- From
- 142.5 m
- To
- 172 m
- Hole Depth
- 327 m
- Intercept Depth
- 142.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-298:142.5-172
- Mining Method
- unknown
Location
- Location
- Cartwright
- Easting
- 360858
- Northing
- 5463330
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This intercept confirms the continuity of mineralization in the Cartwright area at depth, contributing to the understanding of the deposit's geometry.
Positive factors
- Confirms continuity of mineralization at depth in the Cartwright area.
- True width estimated at 80% of downhole length.
Evidence · table
“0.3”
Context: 29.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 23.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-298Flordin · goldGrade: 3.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- FL-26-298
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 145 m
- To
- 146 m
- Hole Depth
- 327 m
- Intercept Depth
- 142.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-298:145-146
- Mining Method
- unknown
Location
- Location
- Cartwright
- Easting
- 360858
- Northing
- 5463330
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This high-grade sub-interval indicates the presence of richer gold mineralization within the broader zone, enhancing the overall prospectivity.
Positive factors
- High-grade sub-interval within a broader mineralized zone.
- True width estimated at 80% of downhole length.
Evidence · table
“3.9”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-299Flordin · goldGrade: 0.4Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- FL-26-299
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 14 m
- True Width
- 11.2 m
- From
- 145 m
- To
- 159 m
- Hole Depth
- 257 m
- Intercept Depth
- 145 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-299:145-159
- Mining Method
- unknown
Location
- Location
- Cartwright
- Easting
- 360674
- Northing
- 5463370
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This intercept further confirms the continuity of mineralization in the Cartwright area, supporting the geological model.
Positive factors
- Confirms continuity of mineralization in the Cartwright area.
- True width estimated at 80% of downhole length.
Evidence · table
“0.4”
Context: 14.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-299Flordin · goldGrade: 2.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- FL-26-299
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 153 m
- To
- 154 m
- Hole Depth
- 257 m
- Intercept Depth
- 145 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-299:153-154
- Mining Method
- unknown
Location
- Location
- Cartwright
- Easting
- 360674
- Northing
- 5463370
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This sub-interval indicates localized higher-grade mineralization within the Cartwright zone.
Positive factors
- Higher-grade sub-interval within the broader mineralized zone.
- True width estimated at 80% of downhole length.
Evidence · table
“2.2”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-300Flordin · goldGrade: 0.3Grade Unit: g/tIntercept: 22.5 mView all detailsHide details
Identity
- Hole ID
- FL-26-300
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 22.5 m
- True Width
- 18 m
- From
- 181.5 m
- To
- 204 m
- Hole Depth
- 231 m
- Intercept Depth
- 181.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-300:181.5-204
- Mining Method
- unknown
Location
- Location
- Cartwright/IP3
- Easting
- 360819
- Northing
- 5463372
- Elevation
- 330 m
- Azimuth
- 200 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This intercept validates the IP No. 3 anomaly, indicating that geophysical surveys are effective in identifying gold mineralization at depth.
Positive factors
- Intercepted mineralization in the IP No. 3 anomaly, validating geophysical targets.
- True width estimated at 80% of downhole length.
Evidence · table
“0.3”
Context: 22.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-300Flordin · goldGrade: 2.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- FL-26-300
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 2.3
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 191 m
- To
- 192 m
- Hole Depth
- 231 m
- Intercept Depth
- 181.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-300:191-192
- Mining Method
- unknown
Location
- Location
- Cartwright/IP3
- Easting
- 360819
- Northing
- 5463372
- Elevation
- 330 m
- Azimuth
- 200 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This sub-interval highlights a higher-grade portion within the mineralization intersected in the IP No. 3 anomaly.
Positive factors
- Higher-grade sub-interval within the IP No. 3 anomaly.
- True width estimated at 80% of downhole length.
Evidence · table
“2.3”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-301Flordin · goldGrade: 0.4Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- FL-26-301
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 5 m
- True Width
- 4 m
- From
- 146 m
- To
- 151 m
- Hole Depth
- 300 m
- Intercept Depth
- 146 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-301:146-151
- Mining Method
- unknown
Location
- Location
- Cartwright
- Easting
- 360683
- Northing
- 5463409
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This intercept provides further confirmation of mineralization in the Cartwright area, albeit with modest grades.
Positive factors
- Confirms continuity of mineralization in the Cartwright area.
- True width estimated at 80% of downhole length.
Evidence · table
“0.4”
Context: 5.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-301Flordin · goldGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- FL-26-301
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 146 m
- To
- 147 m
- Hole Depth
- 300 m
- Intercept Depth
- 146 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-301:146-147
- Mining Method
- unknown
Location
- Location
- Cartwright
- Easting
- 360683
- Northing
- 5463409
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This sub-interval shows a modest higher-grade section within the Cartwright mineralization.
Positive factors
- Higher-grade sub-interval within the Cartwright zone.
- True width estimated at 80% of downhole length.
Evidence · table
“1.1”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-304Flordin · goldGrade: 0.4Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- FL-26-304
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 11 m
- True Width
- 8.8 m
- From
- 110 m
- To
- 121 m
- Hole Depth
- 231 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-304:110-121
- Mining Method
- unknown
Location
- Location
- Stripping 25-2
- Easting
- 359537
- Northing
- 5463495
- Elevation
- 335 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This intercept contributes to confirming the lateral extension of the mineralized system, although with modest grades.
Positive factors
- Confirms lateral extension of the mineralized system in the Stripping 25-2 area.
- True width estimated at 80% of downhole length.
Evidence · table
“0.4”
Context: 11.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-304Flordin · goldGrade: 1.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- FL-26-304
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 120 m
- To
- 121 m
- Hole Depth
- 231 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-304:120-121
- Mining Method
- unknown
Location
- Location
- Stripping 25-2
- Easting
- 359537
- Northing
- 5463495
- Elevation
- 335 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This sub-interval shows a modest higher-grade section within the Stripping 25-2 mineralization.
Positive factors
- Higher-grade sub-interval within the Stripping 25-2 zone.
- True width estimated at 80% of downhole length.
Evidence · table
“1.9”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-305Flordin · goldGrade: 0.2Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- FL-26-305
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 11 m
- True Width
- 8.8 m
- From
- 93 m
- To
- 104 m
- Hole Depth
- 321 m
- Intercept Depth
- 93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-305:93-104
- Mining Method
- unknown
Location
- Location
- Stripping 25-2
- Easting
- 360400
- Northing
- 5463518
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This intercept contributes to confirming the lateral extension of the mineralized system, though with low grades.
Positive factors
- Confirms lateral extension of the mineralized system in the Stripping 25-2 area.
- True width estimated at 80% of downhole length.
Evidence · table
“0.2”
Context: 11.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-305Flordin · goldGrade: 0.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- FL-26-305
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 93 m
- To
- 94 m
- Hole Depth
- 321 m
- Intercept Depth
- 93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-305:93-94
- Mining Method
- unknown
Location
- Location
- Stripping 25-2
- Easting
- 360400
- Northing
- 5463518
- Elevation
- 328 m
- Azimuth
- 200 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This sub-interval shows a modest higher-grade section within the Stripping 25-2 mineralization.
Positive factors
- Modest higher-grade sub-interval within the Stripping 25-2 zone.
- True width estimated at 80% of downhole length.
Evidence · table
“0.9”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-306Flordin · goldGrade: 0.5Grade Unit: g/tIntercept: 153 mView all detailsHide details
Identity
- Hole ID
- FL-26-306
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 153 m
- True Width
- 122.4 m
- From
- 185 m
- To
- 338 m
- Hole Depth
- 399 m
- Intercept Depth
- 185 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-306:185-338
- Mining Method
- unknown
Location
- Location
- South Zone
- Easting
- 359393
- Northing
- 5463955
- Elevation
- 335 m
- Azimuth
- 175 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This long intercept in the South Zone represents a significant new discovery or extension, substantially increasing the project's value and exploration potential.
Positive factors
- Very long intercept (153m) of gold mineralization in a previously underexplored area (South Zone).
- Significantly increases the value of the Flordin project and its South Zone.
- True width estimated at 80% of downhole length.
Evidence · table
“0.5”
Context: 153.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 122.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FL-26-306Flordin · goldGrade: 10.9Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- FL-26-306
- Project
- Flordin
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- ABI
Geometry
- Grade
- 10.9
- Grade Unit
- g/t
- Intercept
- 2.1 m
- True Width
- 1.68 m
- From
- 224 m
- To
- 226.1 m
- Hole Depth
- 399 m
- Intercept Depth
- 185 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FL-26-306:224-226.1
- Mining Method
- unknown
Location
- Location
- South Zone
- Easting
- 359393
- Northing
- 5463955
- Elevation
- 335 m
- Azimuth
- 175 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-08T00:00:00.000Z
Reasoning: This bonanza-grade sub-interval within the South Zone is a highly material result, indicating very rich gold mineralization in a new area.
Positive factors
- Exceptional high-grade sub-interval (10.9 g/t Au) within a significant new discovery zone.
- True width estimated at 80% of downhole length.
Evidence · table
“10.9”
Context: 2.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.68
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.