ArcWest Provides an Exploration Update for Its Oweegee Porphyry Copper-Gold Project in B.C.'s Golden Triangle: An Initial 5,000 Metre Drill Program, Funded by Partner Sanatana Resources, is Planned for 2022
Original announcement by tmx on
- Company
- ArcWest Exploration
- Ticker
- AWX
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Zinc, Molybdenum
- Document categories
- Drill results
- Extracted
- 2026-09-19 17:10:43 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
ArcWest Exploration announced an exploration update for its Oweegee Porphyry Copper-Gold Project in British Columbia's Golden Triangle, including plans for an initial 5,000-meter drill program in 2022, funded by partner Sanatana Resources. The update highlights positive copper-gold assays from 2021 rock samples at the Molloy Zone, confirming high-grade mineralization in an undrilled area. The project is located near major deposits like KSM-Iron Cap and Treaty Creek, with multiple targets identified for future exploration.
Reasoning: The document announces a significant planned drill program on a porphyry copper-gold project in a highly prospective region, supported by high-grade surface sample results and geological evidence of a large system. While no new drill results are presented, the confirmation of high-grade surface mineralization in undrilled zones and the detailed exploration plan are positive. The historical drill results are low-grade but provide context for the project's potential.
Positive factors
- Planned 5,000m drill program targeting high-priority porphyry Cu-Au zones
- High-grade rock samples from Molloy Zone confirm historical results and indicate significant potential
- Multiple targets identified (Molloy, Snowpatch, Tarn, Delta A) with porphyry-style alteration and mineralization
- QA/QC procedures are disclosed, including certified lab and QP sign-off
- Project is located in the prolific Golden Triangle, near major deposits
Negative factors
- Rock samples are selective grab samples, which may not be representative of overall mineralization
- Historical drill results are not verified by ArcWest and are relatively low-grade for porphyry copper
- No new drill results are reported in this update, only plans and surface samples
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 75
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details rigorous field procedures, insertion of standards, and analysis by ALS Global, with results evaluated against internal requirements.
Evidence · text
“Rigorous field procedures were followed to ensure QA/QC measures, including routinely inserting an appropriate copper-gold Certified Reference Material standard. ... Samples were delivered to ALS Global's prep-lab in Kamloops BC where sample materials were crushed and sent to ALS Global's analytical lab in North Vancouver. ... ALS Labs also applied their own internal QA/QC procedures by systematically inserting standards, blanks and duplicates into sample batches. Lab results were evaluated to ensure they passed the internal requirements prior to release of the final test reports.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: ArcWest's disclosure of a technical or scientific nature has been reviewed and approved by Scott McBride, PGeo, a Qualified Person under NI 43-101.
Evidence · text
“ArcWest's disclosure of a technical or scientific nature in this news release has been reviewed and approved by Scott McBride, PGeo, who serves as a Qualified Person under the definition of National Instrument 43-101.”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: The project is described as being approximately 45 km east of Seabridge Gold's KSM-Iron Cap deposits and Tudor Gold's Treaty Creek project, leveraging their success.
Evidence · text
“The Oweegee project is approximately 45 km east of Seabridge Gold's giant KSM-Iron Cap porphyry Cu-Au deposits as well as Tudor Gold's Treaty Creek Au-Ag-Cu project. Collectively, the KSM-Iron Cap and Treaty Creek deposits represent one of the largest Au-Cu concentrations in North America.”
Extracted facts
Stored fact records: 75. Some facts used in scoring do not have a stored record.
Drill Results (75)
Fact 1Oweegee Porphyry · goldGrade: 2.2Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468121
- Northing
- 6273903
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This rock sample shows a high gold grade, confirming the prospectivity of the Molloy Zone. However, as a grab sample, it may not represent the average grade of the zone.
Positive factors
- High gold grade for a porphyry system
- Sample confirms historical results
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“2.200”
Context: A0420017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 2Oweegee Porphyry · silverGrade: 1.42Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468121
- Northing
- 6273903
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low silver grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“1.42”
Context: A0420017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 3Oweegee Porphyry · copperGrade: 0.164Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.164
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468121
- Northing
- 6273903
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.164”
Context: A0420017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 4Oweegee Porphyry · zincGrade: 0.012Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.012
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468121
- Northing
- 6273903
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.012”
Context: A0420017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 5Oweegee Porphyry · goldGrade: 3.82Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 3.82
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468176
- Northing
- 6273961
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This rock sample shows a high gold grade, confirming the prospectivity of the Molloy Zone. However, as a grab sample, it may not represent the average grade of the zone.
Positive factors
- High gold grade for a porphyry system
- Sample confirms historical results
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“3.820”
Context: A0420022
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 6Oweegee Porphyry · silverGrade: 15.25Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 15.25
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468176
- Northing
- 6273961
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Moderate silver grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“15.25”
Context: A0420022
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 7Oweegee Porphyry · copperGrade: 1.09Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 1.09
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468176
- Northing
- 6273961
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This rock sample shows a high copper grade, confirming the prospectivity of the Molloy Zone. However, as a grab sample, it may not represent the average grade of the zone.
Positive factors
- High copper grade for a porphyry system
- Sample confirms historical results
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“1.090”
Context: A0420022
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 8Oweegee Porphyry · zincGrade: 0.035Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.035
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468176
- Northing
- 6273961
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.035”
Context: A0420022
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 9Oweegee Porphyry · goldGrade: 2.37Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 2.37
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468172
- Northing
- 6273981
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This rock sample shows a high gold grade, confirming the prospectivity of the Molloy Zone. However, as a grab sample, it may not represent the average grade of the zone.
Positive factors
- High gold grade for a porphyry system
- Sample confirms historical results
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“2.370”
Context: A0420023
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 10Oweegee Porphyry · silverGrade: 16.15Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 16.15
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468172
- Northing
- 6273981
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Moderate silver grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“16.15”
Context: A0420023
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 11Oweegee Porphyry · copperGrade: 0.827Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.827
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468172
- Northing
- 6273981
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This rock sample shows a high copper grade, confirming the prospectivity of the Molloy Zone. However, as a grab sample, it may not represent the average grade of the zone.
Positive factors
- High copper grade for a porphyry system
- Sample confirms historical results
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.827”
Context: A0420023
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 12Oweegee Porphyry · zincGrade: 0.019Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.019
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468172
- Northing
- 6273981
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.019”
Context: A0420023
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 13Oweegee Porphyry · goldGrade: 0.171Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.171
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468189
- Northing
- 6273992
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.171”
Context: A0420061
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 14Oweegee Porphyry · silverGrade: 1.22Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 1.22
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468189
- Northing
- 6273992
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“1.22”
Context: A0420061
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 15Oweegee Porphyry · copperGrade: 0.123Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.123
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468189
- Northing
- 6273992
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.123”
Context: A0420061
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 16Oweegee Porphyry · zincGrade: 0.017Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.017
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468189
- Northing
- 6273992
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.017”
Context: A0420061
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 17Oweegee Porphyry · goldGrade: 0.312Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.312
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273967
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.312”
Context: A0420062
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 18Oweegee Porphyry · silverGrade: 9.69Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 9.69
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273967
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low silver grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“9.69”
Context: A0420062
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 19Oweegee Porphyry · copperGrade: 0.204Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.204
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273967
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.204”
Context: A0420062
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 20Oweegee Porphyry · zincGrade: 12.35Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 12.35
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273967
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This rock sample shows a very high zinc grade, indicating potential for polymetallic mineralization. However, as a grab sample, it may not represent the average grade of the zone.
Positive factors
- High zinc grade
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“12.35”
Context: A0420062
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 21Oweegee Porphyry · goldGrade: 0.615Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.615
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468192
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Moderate gold grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.615”
Context: A0420063
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 22Oweegee Porphyry · silverGrade: 5.42Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 5.42
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468192
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low silver grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“5.42”
Context: A0420063
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 23Oweegee Porphyry · copperGrade: 0.532Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.532
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468192
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- Moderate copper grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.532”
Context: A0420063
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 24Oweegee Porphyry · zincGrade: 0.025Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.025
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468192
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.025”
Context: A0420063
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 25Oweegee Porphyry · goldGrade: 0.021Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.021
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468208
- Northing
- 6274003
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low gold grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.021”
Context: A0420064
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 26Oweegee Porphyry · silverGrade: 0.54Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468208
- Northing
- 6274003
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.54”
Context: A0420064
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 27Oweegee Porphyry · copperGrade: 0.053Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.053
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468208
- Northing
- 6274003
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low copper grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.053”
Context: A0420064
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 28Oweegee Porphyry · zincGrade: 0.028Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.028
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468208
- Northing
- 6274003
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.028”
Context: A0420064
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 29Oweegee Porphyry · goldGrade: 0.497Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.497
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468128
- Northing
- 6273894
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.497”
Context: A0420163
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 30Oweegee Porphyry · silverGrade: 0.51Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468128
- Northing
- 6273894
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.51”
Context: A0420163
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 31Oweegee Porphyry · copperGrade: 0.059Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.059
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468128
- Northing
- 6273894
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low copper grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.059”
Context: A0420163
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 32Oweegee Porphyry · zincGrade: 0.016Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.016
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468128
- Northing
- 6273894
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.016”
Context: A0420163
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 33Oweegee Porphyry · goldGrade: 0.033Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.033
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468162
- Northing
- 6273976
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low gold grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.033”
Context: A0420167
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 34Oweegee Porphyry · silverGrade: 0.16Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468162
- Northing
- 6273976
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.16”
Context: A0420167
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 35Oweegee Porphyry · copperGrade: 0.043Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.043
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468162
- Northing
- 6273976
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low copper grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.043”
Context: A0420167
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 36Oweegee Porphyry · zincGrade: 0.02Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.02
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468162
- Northing
- 6273976
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.020”
Context: A0420167
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 37Oweegee Porphyry · goldGrade: 0.035Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.035
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468175
- Northing
- 6273969
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low gold grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.035”
Context: A0420168
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 38Oweegee Porphyry · silverGrade: 0.35Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468175
- Northing
- 6273969
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.35”
Context: A0420168
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 39Oweegee Porphyry · copperGrade: 0.054Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.054
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468175
- Northing
- 6273969
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low copper grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.054”
Context: A0420168
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 40Oweegee Porphyry · zincGrade: 0.026Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.026
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468175
- Northing
- 6273969
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.026”
Context: A0420168
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 41Oweegee Porphyry · goldGrade: 1.12Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468177
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- Moderate gold grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“1.120”
Context: A0420169
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 42Oweegee Porphyry · silverGrade: 5.23Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 5.23
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468177
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low silver grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“5.23”
Context: A0420169
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 43Oweegee Porphyry · copperGrade: 0.712Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.712
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468177
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- Moderate copper grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.712”
Context: A0420169
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 44Oweegee Porphyry · zincGrade: 0.029Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.029
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468177
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.029”
Context: A0420169
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 45Oweegee Porphyry · goldGrade: 0.044Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.044
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468168
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low gold grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.044”
Context: A0420170
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 46Oweegee Porphyry · silverGrade: 0.44Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468168
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.44”
Context: A0420170
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 47Oweegee Porphyry · copperGrade: 0.157Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.157
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468168
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.157”
Context: A0420170
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 48Oweegee Porphyry · zincGrade: 0.031Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.031
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468168
- Northing
- 6273982
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.031”
Context: A0420170
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 49Oweegee Porphyry · goldGrade: 0.704Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.704
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468167
- Northing
- 6273959
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Moderate gold grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.704”
Context: A0420171
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 50Oweegee Porphyry · silverGrade: 2.25Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 2.25
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468167
- Northing
- 6273959
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“2.25”
Context: A0420171
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 51Oweegee Porphyry · copperGrade: 0.363Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.363
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468167
- Northing
- 6273959
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- Moderate copper grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.363”
Context: A0420171
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 52Oweegee Porphyry · zincGrade: 0.033Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.033
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468167
- Northing
- 6273959
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.033”
Context: A0420171
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 53Oweegee Porphyry · goldGrade: 0.044Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.044
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468180
- Northing
- 6273945
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low gold grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.044”
Context: A0420176
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 54Oweegee Porphyry · silverGrade: 0.31Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468180
- Northing
- 6273945
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.31”
Context: A0420176
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 55Oweegee Porphyry · copperGrade: 0.045Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.045
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468180
- Northing
- 6273945
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low copper grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.045”
Context: A0420176
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 56Oweegee Porphyry · zincGrade: 0.021Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.021
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468180
- Northing
- 6273945
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, indicating minimal mineralization in this sample. However, QA/QC was disclosed.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.021”
Context: A0420176
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 57Oweegee Porphyry · goldGrade: 0.462Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.462
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273972
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The gold grade is low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.462”
Context: A0420177
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 58Oweegee Porphyry · silverGrade: 3.31Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 3.31
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273972
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The silver grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low silver grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“3.31”
Context: A0420177
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 59Oweegee Porphyry · copperGrade: 0.714Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.714
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273972
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The copper grade is moderate, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- Moderate copper grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.714”
Context: A0420177
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 60Oweegee Porphyry · zincGrade: 0.025Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.025
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Molloy Zone
- Easting
- 468188
- Northing
- 6273972
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: The zinc grade is very low, but the sample is from a prospective zone with disclosed QA/QC.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Very low zinc grade
- Selective grab sample, not representative of bulk mineralization
Evidence · table
“0.025”
Context: A0420177
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DC96-02Oweegee Porphyry · goldGrade: 0.263Grade Unit: g/tIntercept: 70.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC96-02
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.263
- Grade Unit
- g/t
- Intercept
- 70.4 m
- From
- 3.05 m
- To
- 73.45 m
- Intercept Depth
- 3.05 m
Classification
- Sample Type
- drill
- Group ID
- DC96-02:3.05-73.45
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a moderate length but low gold grade for a porphyry system. It provides context but is not new information.
Positive factors
- Moderate intercept length
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.263”
Context: DC96-02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC96-02Oweegee Porphyry · copperGrade: 0.12Grade Unit: %Intercept: 70.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC96-02
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 70.4 m
- From
- 3.05 m
- To
- 73.45 m
- Intercept Depth
- 3.05 m
Classification
- Sample Type
- drill
- Group ID
- DC96-02:3.05-73.45
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a moderate length but low copper grade for a porphyry system. It provides context but is not new information.
Positive factors
- Moderate intercept length
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.12”
Context: DC96-02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC96-02Oweegee Porphyry · goldGrade: 0.52Grade Unit: g/tIntercept: 20.9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC96-02
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 20.9 m
- From
- 7.55 m
- To
- 28.45 m
- Intercept Depth
- 7.55 m
Classification
- Sample Type
- drill
- Group ID
- DC96-02:7.55-28.45
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a moderate gold grade, providing context for the Delta A Zone. It is not new information.
Positive factors
- Moderate gold grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Historical data, not new results
Evidence · table
“0.520”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC96-02Oweegee Porphyry · copperGrade: 0.15Grade Unit: %Intercept: 20.9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC96-02
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 20.9 m
- From
- 7.55 m
- To
- 28.45 m
- Intercept Depth
- 7.55 m
Classification
- Sample Type
- drill
- Group ID
- DC96-02:7.55-28.45
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a low copper grade, providing context for the Delta A Zone. It is not new information.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.15”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC96-02Oweegee Porphyry · goldGrade: 0.276Grade Unit: g/tIntercept: 22.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC96-02
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.276
- Grade Unit
- g/t
- Intercept
- 22.8 m
- From
- 174.3 m
- To
- 197.1 m
- Intercept Depth
- 174.3 m
Classification
- Sample Type
- drill
- Group ID
- DC96-02:174.3-197.1
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a moderate length but low gold grade for a porphyry system. It provides context but is not new information.
Positive factors
- Moderate intercept length
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.276”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC96-02Oweegee Porphyry · copperGrade: 0.17Grade Unit: %Intercept: 22.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC96-02
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 22.8 m
- From
- 174.3 m
- To
- 197.1 m
- Intercept Depth
- 174.3 m
Classification
- Sample Type
- drill
- Group ID
- DC96-02:174.3-197.1
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a moderate length but low copper grade for a porphyry system. It provides context but is not new information.
Positive factors
- Moderate intercept length
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.17”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC07-03Oweegee Porphyry · goldGrade: 0.228Grade Unit: g/tIntercept: 86.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC07-03
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.228
- Grade Unit
- g/t
- Intercept
- 86.3 m
- From
- 59.26 m
- To
- 145.56 m
- Intercept Depth
- 59.26 m
Classification
- Sample Type
- drill
- Group ID
- DC07-03:59.26-145.56
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a strong length but low gold grade for a porphyry system. It provides context but is not new information.
Positive factors
- Strong intercept length
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.228”
Context: DC07-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC07-03Oweegee Porphyry · copperGrade: 0.1Grade Unit: %Intercept: 86.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC07-03
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 86.3 m
- From
- 59.26 m
- To
- 145.56 m
- Intercept Depth
- 59.26 m
Classification
- Sample Type
- drill
- Group ID
- DC07-03:59.26-145.56
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a strong length but low copper grade for a porphyry system. It provides context but is not new information.
Positive factors
- Strong intercept length
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.10”
Context: DC07-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC07-03Oweegee Porphyry · goldGrade: 0.442Grade Unit: g/tIntercept: 15.64 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC07-03
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.442
- Grade Unit
- g/t
- Intercept
- 15.64 m
- From
- 80.16 m
- To
- 95.8 m
- Intercept Depth
- 80.16 m
Classification
- Sample Type
- drill
- Group ID
- DC07-03:80.16-95.8
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a moderate gold grade, providing context for the Delta A Zone. It is not new information.
Positive factors
- Moderate gold grade for a porphyry system
- QA/QC procedures disclosed
Negative factors
- Historical data, not new results
Evidence · table
“0.442”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC07-03Oweegee Porphyry · copperGrade: 0.1Grade Unit: %Intercept: 15.64 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC07-03
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 15.64 m
- From
- 80.16 m
- To
- 95.8 m
- Intercept Depth
- 80.16 m
Classification
- Sample Type
- drill
- Group ID
- DC07-03:80.16-95.8
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a low copper grade, providing context for the Delta A Zone. It is not new information.
Positive factors
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Historical data, not new results
Evidence · table
“0.10”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC07-03Oweegee Porphyry · copperGrade: 0.1Grade Unit: %Intercept: 89.43 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC07-03
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 89.43 m
- From
- 57.79 m
- To
- 147.22 m
- Intercept Depth
- 57.79 m
Classification
- Sample Type
- drill
- Group ID
- DC07-03:57.79-147.22
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a strong length but low copper grade for a porphyry system. It provides context but is not new information.
Positive factors
- Strong intercept length
- QA/QC procedures disclosed
Negative factors
- Low copper grade for a porphyry system
- Historical data, not new results
Evidence · text
“DC07-03, which intercepted 0.10% Cu and 0.225 g/t Au over 89.43 m (57.79-147.22m)”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
DC07-03Oweegee Porphyry · goldGrade: 0.225Grade Unit: g/tIntercept: 89.43 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- DC07-03
- Project
- Oweegee Porphyry
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.225
- Grade Unit
- g/t
- Intercept
- 89.43 m
- From
- 57.79 m
- To
- 147.22 m
- Intercept Depth
- 57.79 m
Classification
- Sample Type
- drill
- Group ID
- DC07-03:57.79-147.22
Location
- Location
- Delta A Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This is a historical drill intercept with a strong length but low gold grade for a porphyry system. It provides context but is not new information.
Positive factors
- Strong intercept length
- QA/QC procedures disclosed
Negative factors
- Low gold grade for a porphyry system
- Historical data, not new results
Evidence · text
“DC07-03, which intercepted 0.10% Cu and 0.225 g/t Au over 89.43 m (57.79-147.22m)”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Fact 73Oweegee Porphyry · zincGrade: 5.72Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 5.72
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Tarn Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This high-grade zinc rock sample represents a new discovery in the Tarn Zone, indicating significant exploration potential. However, it is from limited sampling.
Positive factors
- High zinc grade
- New discovery in previously unexplored area
- QA/QC procedures disclosed
Negative factors
- Limited rock sampling, not representative of bulk mineralization
Evidence · text
“Limited rock sampling returned assays up to 5.72% Zn, 0.44% Cu and 4.2 g/t Ag (sample A0420268; 465645E 6281505N Z9N)”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 74Oweegee Porphyry · copperGrade: 0.44Grade Unit: %View all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 0.44
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Tarn Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This moderate-grade copper rock sample is part of a new discovery in the Tarn Zone, indicating exploration potential. However, it is from limited sampling.
Positive factors
- Moderate copper grade for a porphyry system
- New discovery in previously unexplored area
- QA/QC procedures disclosed
Negative factors
- Limited rock sampling, not representative of bulk mineralization
Evidence · text
“Limited rock sampling returned assays up to 5.72% Zn, 0.44% Cu and 4.2 g/t Ag (sample A0420268; 465645E 6281505N Z9N)”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 75Oweegee Porphyry · silverGrade: 4.2Grade Unit: g/tView all detailsHide details
Identity
- Project
- Oweegee Porphyry
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- AWX
Geometry
- Grade
- 4.2
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Tarn Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-05-05T00:00:00.000Z
Reasoning: This low-grade silver rock sample is part of a new discovery in the Tarn Zone, indicating exploration potential. However, it is from limited sampling.
Positive factors
- New discovery in previously unexplored area
- QA/QC procedures disclosed
Negative factors
- Low silver grade for a porphyry system
- Limited rock sampling, not representative of bulk mineralization
Evidence · text
“Limited rock sampling returned assays up to 5.72% Zn, 0.44% Cu and 4.2 g/t Ag (sample A0420268; 465645E 6281505N Z9N)”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.