Arya Resources Announces Successful Phase 2 Drilling at Wedge Lake: Gold and Silver Intersected in All Holes, New Triplet Zone Discovered
Original announcement by tmx on
- Company
- Arya Resources
- Ticker
- RBZ
- Exchange
- TSX
- Region
- Saskatchewan
- Primary commodity
- Gold
- Secondary commodities
- Silver, Scandium
- Document categories
- Drill results
- Extracted
- 2026-09-16 18:39:10 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Arya Resources reported successful Phase 2 drilling at its Wedge Lake Project, with all holes intersecting gold and silver mineralization. Highlights include 18.99 g/t Au over 2.0 m in AR26-15 and the discovery of the new Triplet Zone, which expands the project's exploration footprint. The company is fully funded for a follow-up Phase 3 program to further expand the Twin and Triplet Zones.
Reasoning: Arya Resources announced highly positive Phase 2 drill results from its Wedge Lake Project, with all holes intersecting gold and silver mineralization, including several high-grade gold intercepts. The discovery of the new Triplet Zone significantly expands the project's potential. Robust QA/QC procedures enhance confidence in the results, though the lack of true width determination is a minor drawback.
Positive factors
- 100% success rate in intersecting mineralization
- High-grade gold intercepts, including bonanza grades
- Discovery of a new mineralized zone (Triplet Zone) expanding exploration footprint
- Widespread silver and elevated scandium grades, suggesting polymetallic potential
- QA/QC procedures are well-documented and lab is accredited
Negative factors
- True widths are not yet determined for reported intercepts
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 70
Extracted facts
Stored fact records: 70. Some facts used in scoring do not have a stored record.
Drill Results (70)
AR26-13Wedge Lake · goldGrade: 1.79Grade Unit: g/tIntercept: 8.4 mView all detailsHide details
Identity
- Hole ID
- AR26-13
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 8.4 m
- From
- 125 m
- To
- 133.4 m
- Hole Depth
- 167 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-13:125-133.4
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.42
- Northing
- 6234691.89
- Azimuth
- 170 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows a good gold grade over a moderate width, contributing to the overall positive results and confirming continuity in the Twin Gold Zone.
Positive factors
- Solid gold grade over a good width
- Confirms continuity of mineralization
Negative factors
- True width not determined
Evidence · table
“1.79”
Context: 8.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is sieved at +/- 106 µm. All the +106 µm material is fire assayed. Two 30 g replicates are fire assayed from the -106 µm fraction. All weights, assays, and calculations are reported. The remaining samples were analyzed using the Sample method AU3-Gold by fire assay with gravimetric finish. Company protocols include the insertion of quality control samples consisting of blind standards (Certified Reference Materials (CRMs), blanks and sample duplicates into the sample stream at a rate of 1 in 30 Arya is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-13Wedge Lake · goldGrade: 4.43Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- AR26-13
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.43
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 127 m
- To
- 130 m
- Hole Depth
- 167 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-13:127-130
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.42
- Northing
- 6234691.89
- Azimuth
- 170 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader intercept in AR26-13.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- True width not determined
Evidence · table
“4.43”
Context: 3.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-13Wedge Lake · silverGrade: 6.56Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- AR26-13
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 6.56
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 61 m
- To
- 65 m
- Hole Depth
- 167 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-13:61-65
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.42
- Northing
- 6234691.89
- Azimuth
- 170 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept indicates the presence of silver mineralization, contributing to the understanding of the polymetallic nature of the system, though the grade is not exceptionally high.
Positive factors
- Confirms widespread silver mineralization
Negative factors
- Grade is moderate
- True width not determined
Evidence · table
“6.56”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-13Wedge Lake · scandiumGrade: 19.7Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- AR26-13
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 19.7
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 61 m
- To
- 65 m
- Hole Depth
- 167 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-13:61-65
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.42
- Northing
- 6234691.89
- Azimuth
- 170 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows elevated scandium, which is a positive indicator for the polymetallic nature of the deposit, though its economic significance is yet to be fully determined.
Positive factors
- Elevated scandium grades add to polymetallic potential
Negative factors
- True width not determined
Evidence · table
“19.70”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · goldGrade: 0.38Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 58 m
- To
- 67 m
- Hole Depth
- 188 m
- Intercept Depth
- 58 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:58-67
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows weak gold mineralization over a good width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Confirms gold mineralization over a good width
Negative factors
- Grade is weak for gold
- True width not determined
Evidence · table
“0.38”
Context: 9.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · goldGrade: 1.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 65 m
- To
- 66 m
- Hole Depth
- 188 m
- Intercept Depth
- 58 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:65-66
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade, indicating localized mineralization within the broader zone.
Positive factors
- Moderate gold grade within a broader zone
Negative factors
- Narrow width
- True width not determined
Evidence · table
“1.03”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · goldGrade: 0.94Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 78.1 m
- To
- 82 m
- Hole Depth
- 188 m
- Intercept Depth
- 78.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:78.1-82
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows weak gold mineralization over a narrow width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Confirms gold mineralization
Negative factors
- Grade is weak for gold
- True width not determined
Evidence · table
“0.94”
Context: 3.90
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · goldGrade: 1.22Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.22
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 78.1 m
- To
- 80 m
- Hole Depth
- 188 m
- Intercept Depth
- 78.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:78.1-80
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a moderate gold grade, indicating localized mineralization within the broader intercept in AR26-14.
Positive factors
- Moderate gold grade within a broader zone
Negative factors
- Narrow width
- True width not determined
Evidence · table
“1.22”
Context: 1.90
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · goldGrade: 1.55Grade Unit: g/tIntercept: 9.3 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.55
- Grade Unit
- g/t
- Intercept
- 9.3 m
- From
- 86 m
- To
- 95.3 m
- Hole Depth
- 188 m
- Intercept Depth
- 86 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:86-95.3
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows a good gold grade over a moderate width, contributing to the overall positive results and confirming continuity in the Twin Gold Zone.
Positive factors
- Solid gold grade over a good width
- Confirms continuity of mineralization
Negative factors
- True width not determined
Evidence · table
“1.55”
Context: 9.30
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · goldGrade: 4.1Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.1
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 89 m
- To
- 91 m
- Hole Depth
- 188 m
- Intercept Depth
- 86 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:89-91
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader intercept in AR26-14.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- True width not determined
Evidence · table
“4.10”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · silverGrade: 9.86Grade Unit: g/tIntercept: 25 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 9.86
- Grade Unit
- g/t
- Intercept
- 25 m
- From
- 61 m
- To
- 86 m
- Hole Depth
- 188 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:61-86
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows good silver mineralization over a substantial width, indicating pervasive silver in the system.
Positive factors
- Good silver grade over a significant width
- Confirms widespread silver mineralization
Negative factors
- True width not determined
Evidence · table
“9.86”
Context: 25.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · scandiumGrade: 25.44Grade Unit: ppmIntercept: 25 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 25.44
- Grade Unit
- ppm
- Intercept
- 25 m
- From
- 61 m
- To
- 86 m
- Hole Depth
- 188 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:61-86
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows elevated scandium over a substantial width, further highlighting the polymetallic nature of the deposit.
Positive factors
- Elevated scandium grades over a significant width
- Adds to polymetallic potential
Negative factors
- True width not determined
Evidence · table
“25.44”
Context: 25.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · silverGrade: 13.32Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 13.32
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 81 m
- To
- 86 m
- Hole Depth
- 188 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:81-86
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a higher silver grade, indicating a more concentrated zone within the broader intercept in AR26-14.
Positive factors
- Higher-grade silver intercept within a broader zone
- Contributes to overall positive results
Negative factors
- True width not determined
Evidence · table
“13.32”
Context: 5.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · scandiumGrade: 40.4Grade Unit: ppmIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 40.4
- Grade Unit
- ppm
- Intercept
- 5 m
- From
- 81 m
- To
- 86 m
- Hole Depth
- 188 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:81-86
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a higher scandium grade, indicating a more concentrated zone within the broader intercept in AR26-14.
Positive factors
- Higher-grade scandium intercept within a broader zone
- Adds to polymetallic potential
Negative factors
- True width not determined
Evidence · table
“40.40”
Context: 5.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · silverGrade: 13.2Grade Unit: g/tIntercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 13.2
- Grade Unit
- g/t
- Intercept
- 9.7 m
- From
- 95.3 m
- To
- 105 m
- Hole Depth
- 188 m
- Intercept Depth
- 95.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:95.3-105
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows good silver mineralization over a good width, further supporting the pervasive nature of silver in the system.
Positive factors
- Good silver grade over a good width
- Confirms widespread silver mineralization
Negative factors
- True width not determined
Evidence · table
“13.20”
Context: 9.70
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · scandiumGrade: 34.94Grade Unit: ppmIntercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 34.94
- Grade Unit
- ppm
- Intercept
- 9.7 m
- From
- 95.3 m
- To
- 105 m
- Hole Depth
- 188 m
- Intercept Depth
- 95.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:95.3-105
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows elevated scandium over a good width, reinforcing the polymetallic potential of the deposit.
Positive factors
- Elevated scandium grades over a good width
- Adds to polymetallic potential
Negative factors
- True width not determined
Evidence · table
“34.94”
Context: 9.70
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · silverGrade: 12.28Grade Unit: g/tIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 12.28
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 158 m
- To
- 164.6 m
- Hole Depth
- 188 m
- Intercept Depth
- 158 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:158-164.6
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows good silver mineralization over a good width, further supporting the pervasive nature of silver in the system.
Positive factors
- Good silver grade over a good width
- Confirms widespread silver mineralization
Negative factors
- True width not determined
Evidence · table
“12.28”
Context: 6.60
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-14Wedge Lake · scandiumGrade: 53.12Grade Unit: ppmIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- AR26-14
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 53.12
- Grade Unit
- ppm
- Intercept
- 6.6 m
- From
- 158 m
- To
- 164.6 m
- Hole Depth
- 188 m
- Intercept Depth
- 158 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-14:158-164.6
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572314.41
- Northing
- 6234691.9
- Azimuth
- 170 °
- Dip
- -46.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This intercept shows high-grade scandium over a good width, further enhancing the polymetallic potential of the deposit.
Positive factors
- High-grade scandium intercept over a good width
- Adds to polymetallic potential
Negative factors
- True width not determined
Evidence · table
“53.12”
Context: 6.60
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-15Wedge Lake · goldGrade: 4.85Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- AR26-15
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.85
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 16 m
- To
- 26.7 m
- Hole Depth
- 83 m
- Intercept Depth
- 16 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-15:16-26.7
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572181.38
- Northing
- 6234473.61
- Azimuth
- 350 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This is a strong gold intercept over a good width, indicating significant mineralization in the Twin Gold Zone and contributing to the overall positive results of the program.
Positive factors
- High-grade gold intercept over a significant width
- Contributes to overall positive results
Negative factors
- True width not determined
Evidence · table
“4.85”
Context: 10.70
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-15Wedge Lake · goldGrade: 18.99Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- AR26-15
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 18.99
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 22 m
- To
- 24 m
- Hole Depth
- 83 m
- Intercept Depth
- 16 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-15:22-24
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572181.38
- Northing
- 6234473.61
- Azimuth
- 350 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a bonanza gold grade, highlighting significant high-grade potential within the Twin Gold Zone and is a key positive result.
Positive factors
- Bonanza grade gold intercept
- Indicates high-grade potential within the zone
Negative factors
- True width not determined
Evidence · table
“18.99”
Context: 2.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 18.99 g/t Au over 2.0 m is an exceptionally high-grade zone, well above the deposit-type norm for gold.
Evidence · table
“18.99”
Context: 2.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 8.71Grade Unit: g/tIntercept: 0.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 8.71
- Grade Unit
- g/t
- Intercept
- 0.75 m
- From
- 12 m
- To
- 12.75 m
- Hole Depth
- 257 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:12-12.75
- Mining Method
- unknown
Location
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This is a high-grade gold intercept at a shallow depth, but its very narrow width and historical nature reduce its overall materiality and novelty.
Positive factors
- High-grade gold intercept
- Shallow depth
Negative factors
- Very narrow width
- True width not determined
- Previously released
Evidence · table
“8.71”
Context: 0.75
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 0.78Grade Unit: g/tIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 74 m
- To
- 84 m
- Hole Depth
- 257 m
- Intercept Depth
- 74 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:74-84
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows weak gold mineralization over a good width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Confirms gold mineralization over a good width
Negative factors
- Grade is weak for gold
- True width not determined
- Previously released
Evidence · table
“0.78”
Context: 10.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 1.23Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 75 m
- To
- 76 m
- Hole Depth
- 257 m
- Intercept Depth
- 74 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:75-76
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This narrow historical intercept shows a moderate gold grade, indicating localized mineralization within the broader zone.
Positive factors
- Moderate gold grade within a broader zone
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“1.23”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 2.2Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 82 m
- To
- 83 m
- Hole Depth
- 257 m
- Intercept Depth
- 74 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:82-83
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This narrow historical intercept shows a good gold grade, indicating localized mineralization within the broader zone.
Positive factors
- Good gold grade within a broader zone
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“2.20”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 3.91Grade Unit: g/tIntercept: 5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 3.91
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 108 m
- To
- 113 m
- Hole Depth
- 257 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:108-113
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows a strong gold grade over a moderate width, contributing to the overall positive results for the Twin Gold Zone.
Positive factors
- High-grade gold intercept over a good width
Negative factors
- True width not determined
- Previously released
Evidence · table
“3.91”
Context: 5.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 5.92Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 5.92
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 109 m
- To
- 112 m
- Hole Depth
- 257 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:109-112
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader historical intercept in AR26-11.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- True width not determined
- Previously released
Evidence · table
“5.92”
Context: 3.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 1.9Grade Unit: g/tIntercept: 6.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 6.8 m
- From
- 140.2 m
- To
- 147 m
- Hole Depth
- 257 m
- Intercept Depth
- 140.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:140.2-147
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows a good gold grade over a moderate width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Solid gold grade over a good width
Negative factors
- True width not determined
- Previously released
Evidence · table
“1.90”
Context: 6.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 3.04Grade Unit: g/tIntercept: 3.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 3.04
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 140.2 m
- To
- 144 m
- Hole Depth
- 257 m
- Intercept Depth
- 140.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:140.2-144
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader historical intercept in AR26-11.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- True width not determined
- Previously released
Evidence · table
“3.04”
Context: 3.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 0.77Grade Unit: g/tIntercept: 10.85 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 10.85 m
- From
- 161 m
- To
- 171.85 m
- Hole Depth
- 257 m
- Intercept Depth
- 161 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:161-171.85
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows weak gold mineralization over a good width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Confirms gold mineralization over a good width
Negative factors
- Grade is weak for gold
- True width not determined
- Previously released
Evidence · table
“0.77”
Context: 10.85
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 1.84Grade Unit: g/tIntercept: 2.85 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.84
- Grade Unit
- g/t
- Intercept
- 2.85 m
- From
- 169 m
- To
- 171.85 m
- Hole Depth
- 257 m
- Intercept Depth
- 161 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:169-171.85
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a good gold grade, indicating localized mineralization within the broader historical intercept in AR26-11.
Positive factors
- Good gold grade within a broader zone
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“1.84”
Context: 2.85
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 2.05Grade Unit: g/tIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.05
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 207 m
- To
- 217 m
- Hole Depth
- 257 m
- Intercept Depth
- 207 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:207-217
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows a good gold grade over a moderate width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Solid gold grade over a good width
Negative factors
- True width not determined
- Previously released
Evidence · table
“2.05”
Context: 10.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11Wedge Lake · goldGrade: 4.77Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-11
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.77
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 207 m
- To
- 210 m
- Hole Depth
- 257 m
- Intercept Depth
- 207 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-11:207-210
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572273.72
- Northing
- 6234682.96
- Azimuth
- 170 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader historical intercept in AR26-11.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- True width not determined
- Previously released
Evidence · table
“4.77”
Context: 3.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-11**”
Context: 12.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · goldGrade: 2.56Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.56
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 33 m
- To
- 37 m
- Hole Depth
- 110 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:33-37
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows a good gold grade over a moderate width, contributing to the overall understanding of the Twin Gold Zone's extent.
Positive factors
- Good gold grade over a moderate width
Negative factors
- True width not determined
- Previously released
Evidence · table
“2.56”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · goldGrade: 9.55Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 9.55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 36 m
- To
- 37 m
- Hole Depth
- 110 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:36-37
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader historical intercept in AR26-12.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“9.55”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · goldGrade: 4.08Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.08
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 89 m
- To
- 91 m
- Hole Depth
- 110 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:89-91
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows a strong gold grade over a narrow width, contributing to the overall positive results for the Twin Gold Zone.
Positive factors
- High-grade gold intercept over a narrow width
Negative factors
- True width not determined
- Previously released
Evidence · table
“4.08”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · goldGrade: 7.86Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 7.86
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 110 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:90-91
- Mining Method
- unknown
Location
- Location
- Twin Gold Zone
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a strong gold grade, indicating a higher-grade core within the broader historical intercept in AR26-12.
Positive factors
- High-grade gold intercept within a broader zone
- Contributes to overall positive results
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“7.86”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · silverGrade: 8Grade Unit: g/tIntercept: 3.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 8
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 24 m
- To
- 27.8 m
- Hole Depth
- 110 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:24-27.8
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept indicates the presence of silver mineralization, contributing to the understanding of the polymetallic nature of the system, though the grade is not exceptionally high.
Positive factors
- Confirms widespread silver mineralization
Negative factors
- Grade is moderate
- True width not determined
- Previously released
Evidence · table
“8.00”
Context: 3.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · scandiumGrade: 19.79Grade Unit: ppmIntercept: 3.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 19.79
- Grade Unit
- ppm
- Intercept
- 3.8 m
- From
- 24 m
- To
- 27.8 m
- Hole Depth
- 110 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:24-27.8
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows elevated scandium, which is a positive indicator for the polymetallic nature of the deposit, though its economic significance is yet to be fully determined.
Positive factors
- Elevated scandium grades add to polymetallic potential
Negative factors
- True width not determined
- Previously released
Evidence · table
“19.79”
Context: 3.80
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · silverGrade: 12.39Grade Unit: g/tIntercept: 5.15 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 12.39
- Grade Unit
- g/t
- Intercept
- 5.15 m
- From
- 43 m
- To
- 48.15 m
- Hole Depth
- 110 m
- Intercept Depth
- 43 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:43-48.15
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows good silver mineralization over a good width, further supporting the pervasive nature of silver in the system.
Positive factors
- Good silver grade over a good width
- Confirms widespread silver mineralization
Negative factors
- True width not determined
- Previously released
Evidence · table
“12.39”
Context: 5.15
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-12Wedge Lake · scandiumGrade: 31.48Grade Unit: ppmIntercept: 5.15 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-12
- Project
- Wedge Lake
- Commodity
- scandium
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 31.48
- Grade Unit
- ppm
- Intercept
- 5.15 m
- From
- 43 m
- To
- 48.15 m
- Hole Depth
- 110 m
- Intercept Depth
- 43 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-12:43-48.15
- Mining Method
- unknown
Location
- Location
- High Sc-Ag
- Easting
- 572369.13
- Northing
- 6234669.27
- Azimuth
- 170 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-05-25T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows elevated scandium over a good width, reinforcing the polymetallic potential of the deposit.
Positive factors
- Elevated scandium grades over a good width
- Adds to polymetallic potential
Negative factors
- True width not determined
- Previously released
Evidence · table
“31.48”
Context: 5.15
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Arya's May 25, 2026 news release'.
Evidence · table
“AR26-12**”
Context: 33.00
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-16Wedge Lake · goldGrade: 0.89Grade Unit: g/tIntercept: 2.25 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-16
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 2.25 m
- From
- 113.85 m
- To
- 116 m
- Hole Depth
- 236 m
- Intercept Depth
- 113.85 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-16:113.85-116
- Mining Method
- unknown
Location
- Location
- T-6 Zone
- Easting
- 571563.93
- Northing
- 6234464.51
- Azimuth
- 223 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-27T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows weak gold mineralization over a narrow width in the T-6 Zone.
Positive factors
- Confirms gold mineralization
Negative factors
- Grade is weak for gold
- Narrow width
- True width not determined
- Previously released
Evidence · table
“0.89”
Context: 2.25
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Ara's April 27, 2026, news release'.
Evidence · table
“AR26-16**”
Context: 113.85
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-16Wedge Lake · goldGrade: 1.11Grade Unit: g/tIntercept: 2.15 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-16
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 2.15 m
- From
- 124.85 m
- To
- 127 m
- Hole Depth
- 236 m
- Intercept Depth
- 124.85 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-16:124.85-127
- Mining Method
- unknown
Location
- Location
- T-6 Zone
- Easting
- 571563.93
- Northing
- 6234464.51
- Azimuth
- 223 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-27T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows a moderate gold grade over a narrow width in the T-6 Zone.
Positive factors
- Moderate gold grade
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“1.11”
Context: 2.15
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Ara's April 27, 2026, news release'.
Evidence · table
“AR26-16**”
Context: 113.85
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-16Wedge Lake · goldGrade: 6.05Grade Unit: g/tIntercept: 10.85 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-16
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 6.05
- Grade Unit
- g/t
- Intercept
- 10.85 m
- From
- 177.15 m
- To
- 188 m
- Hole Depth
- 236 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-16:177.15-188
- Mining Method
- unknown
Location
- Location
- Triplet Zone
- Easting
- 571563.93
- Northing
- 6234464.51
- Azimuth
- 223 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-27T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept represents a significant high-grade gold discovery in the new Triplet Zone, making it a highly material and novel result despite being previously released.
Positive factors
- High-grade gold intercept over a significant width
- Discovery of new Triplet Zone
Negative factors
- True width not determined
- Previously released
Evidence · table
“6.05”
Context: 10.85
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 6.05 g/t Au over 10.85 m is an exceptionally high-grade zone, well above the deposit-type norm for gold.
Evidence · table
“6.05”
Context: 10.85
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Ara's April 27, 2026, news release'.
Evidence · table
“AR26-16**”
Context: 113.85
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-16Wedge Lake · goldGrade: 15.47Grade Unit: g/tIntercept: 2.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-16
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 15.47
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 178.3 m
- To
- 181 m
- Hole Depth
- 236 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-16:178.3-181
- Mining Method
- unknown
Location
- Location
- Triplet Zone
- Easting
- 571563.93
- Northing
- 6234464.51
- Azimuth
- 223 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-27T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a bonanza gold grade, highlighting significant high-grade potential within the new Triplet Zone and is a key positive result, despite being previously released.
Positive factors
- Bonanza grade gold intercept within a broader zone
- Indicates high-grade potential within the new Triplet Zone
Negative factors
- True width not determined
- Previously released
Evidence · table
“15.47”
Context: 2.70
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 15.47 g/t Au over 2.70 m is an exceptionally high-grade zone, well above the deposit-type norm for gold.
Evidence · table
“15.47”
Context: 2.70
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Ara's April 27, 2026, news release'.
Evidence · table
“AR26-16**”
Context: 113.85
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-16Wedge Lake · goldGrade: 1.08Grade Unit: g/tIntercept: 6.25 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-16
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 6.25 m
- From
- 204.75 m
- To
- 211 m
- Hole Depth
- 236 m
- Intercept Depth
- 204.75 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-16:204.75-211
- Mining Method
- unknown
Location
- Location
- Triplet Zone
- Easting
- 571563.93
- Northing
- 6234464.51
- Azimuth
- 223 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-27T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This historical intercept shows moderate gold mineralization over a good width, confirming the presence of gold in the new Triplet Zone.
Positive factors
- Moderate gold grade over a good width
- Confirms mineralization in the new Triplet Zone
Negative factors
- True width not determined
- Previously released
Evidence · table
“1.08”
Context: 6.25
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Ara's April 27, 2026, news release'.
Evidence · table
“AR26-16**”
Context: 113.85
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-16Wedge Lake · goldGrade: 2.5Grade Unit: g/tIntercept: 1.25 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AR26-16
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 204.75 m
- To
- 206 m
- Hole Depth
- 236 m
- Intercept Depth
- 204.75 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- AR26-16:204.75-206
- Mining Method
- unknown
Location
- Location
- Triplet Zone
- Easting
- 571563.93
- Northing
- 6234464.51
- Azimuth
- 223 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-27T00:00:00.000Z
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: This included interval shows a good gold grade, indicating localized mineralization within the broader historical intercept in the new Triplet Zone.
Positive factors
- Good gold grade within a broader zone
- Confirms mineralization in the new Triplet Zone
Negative factors
- Narrow width
- True width not determined
- Previously released
Evidence · table
“2.50”
Context: 1.25
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval reported as core length; true width yet to be determined.
Evidence · text
“*Intervals reported are core lengths; true widths are yet to be determined”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, QP sign-off, and methods like standards, blanks, and duplicates.
Evidence · text
“Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control (QA/QC) for all aspects of its exploration program. All core samples from the winter 2026 program were logged, photographed and sampled in La Ronge, Saskatchewan. Where possible, core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a diamond core saw, with half of each remaining in the core box for future reference. One-half is bagged and then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC Geoanalytical Laboratories (Saskatchewan Research Council), an ISO/IEC 17025 accredited lab in Saskatoon, SK, for preparation (crushing and pulverizing) and analyzed using sample method AU9 for quartz vein material at T-6 (with assumed visible gold). The sample is completely crushed, ground, blended, and split in half. One-half is archived, and the other is siev”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: This result was previously released, as indicated by '**' and the text 'previously released - see Ara's April 27, 2026, news release'.
Evidence · table
“AR26-16**”
Context: 113.85
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
AR26-11**Wedge Lake · goldGrade: 8.71Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 8.71
- Grade Unit
- g/t
- Intercept
- 0.75 m
- From
- 12 m
- To
- 12.75 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:12-12.75
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 8.71 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“8.71”
Context: AR26-11**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 0.78Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 74 m
- To
- 84 m
- Intercept Depth
- 74 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:74-84
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 0.78 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“0.78”
Context: AR26-11**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 1.23Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 75 m
- To
- 76 m
- Intercept Depth
- 75 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:75-76
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 1.23 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“1.23”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andWedge Lake · goldGrade: 2.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 82 m
- To
- 83 m
- Hole Depth
- 267 m
- Intercept Depth
- 82 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:82-83
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 2.2 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“2.20”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 3.91Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 3.91
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 108 m
- To
- 113 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:108-113
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 3.91 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“3.91”
Context: AR26-11**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 5.92Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 5.92
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 109 m
- To
- 112 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:109-112
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 5.92 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“5.92”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 1.9Grade Unit: g/tIntercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 6.8 m
- From
- 140.2 m
- To
- 147 m
- Intercept Depth
- 140.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:140.2-147
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 1.9 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“1.90”
Context: AR26-11**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 3.04Grade Unit: g/tIntercept: 3.8 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 3.04
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 140.2 m
- To
- 144 m
- Intercept Depth
- 140.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:140.2-144
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 3.04 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“3.04”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 0.77Grade Unit: g/tIntercept: 10.85 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 10.85 m
- From
- 161 m
- To
- 171.85 m
- Intercept Depth
- 161 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:161-171.85
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 0.77 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“0.77”
Context: AR26-11**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 1.84Grade Unit: g/tIntercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.84
- Grade Unit
- g/t
- Intercept
- 2.85 m
- From
- 169 m
- To
- 171.85 m
- Intercept Depth
- 169 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:169-171.85
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 1.84 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“1.84”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 2.05Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.05
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 207 m
- To
- 217 m
- Intercept Depth
- 207 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:207-217
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 2.05 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“2.05”
Context: AR26-11**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-11**Wedge Lake · goldGrade: 4.77Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- AR26-11**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.77
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 207 m
- To
- 210 m
- Intercept Depth
- 207 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-11**:207-210
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 4.77 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“4.77”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-12**Wedge Lake · goldGrade: 2.56Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- AR26-12**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.56
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 33 m
- To
- 37 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-12**:33-37
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 2.56 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“2.56”
Context: AR26-12**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-12**Wedge Lake · goldGrade: 9.55Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AR26-12**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 9.55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 36 m
- To
- 37 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-12**:36-37
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 9.55 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“9.55”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-12**Wedge Lake · goldGrade: 4.08Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- AR26-12**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 4.08
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 89 m
- To
- 91 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-12**:89-91
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 4.08 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“4.08”
Context: AR26-12**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-12**Wedge Lake · goldGrade: 7.86Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AR26-12**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 7.86
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-12**:90-91
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 7.86 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“7.86”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-12**Wedge Lake · silverGrade: 8Grade Unit: g/tIntercept: 3.8 mView all detailsHide details
Identity
- Hole ID
- AR26-12**
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 8
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 24 m
- To
- 27.8 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-12**:24-27.8
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 8 ag g/t silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ag g/t does not match the silver rubric unit g/t; not scored.
Evidence · table
“8.00”
Context: AR26-12**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-12**Wedge Lake · silverGrade: 12.39Grade Unit: g/tIntercept: 5.15 mView all detailsHide details
Identity
- Hole ID
- AR26-12**
- Project
- Wedge Lake
- Commodity
- silver
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 12.39
- Grade Unit
- g/t
- Intercept
- 5.15 m
- From
- 43 m
- To
- 48.15 m
- Intercept Depth
- 43 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-12**:43-48.15
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 12.39 ag g/t silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ag g/t does not match the silver rubric unit g/t; not scored.
Evidence · table
“12.39”
Context: AR26-12**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-16**Wedge Lake · goldGrade: 0.89Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- AR26-16**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 2.25 m
- From
- 113.85 m
- To
- 116 m
- Intercept Depth
- 113.85 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-16**:113.85-116
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 0.89 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“0.89”
Context: AR26-16**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-16**Wedge Lake · goldGrade: 1.11Grade Unit: g/tIntercept: 2.15 mView all detailsHide details
Identity
- Hole ID
- AR26-16**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 2.15 m
- From
- 124.85 m
- To
- 127 m
- Intercept Depth
- 124.85 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-16**:124.85-127
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 1.11 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“1.11”
Context: AR26-16**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-16**Wedge Lake · goldGrade: 6.05Grade Unit: g/tIntercept: 10.85 mView all detailsHide details
Identity
- Hole ID
- AR26-16**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 6.05
- Grade Unit
- g/t
- Intercept
- 10.85 m
- From
- 177.15 m
- To
- 188 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-16**:177.15-188
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 6.05 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“6.05”
Context: AR26-16**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-16**Wedge Lake · goldGrade: 15.47Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- AR26-16**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 15.47
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 178.3 m
- To
- 181 m
- Intercept Depth
- 178.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-16**:178.3-181
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 15.47 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“15.47”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-16**Wedge Lake · goldGrade: 1.08Grade Unit: g/tIntercept: 6.25 mView all detailsHide details
Identity
- Hole ID
- AR26-16**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 6.25 m
- From
- 204.75 m
- To
- 211 m
- Intercept Depth
- 204.75 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-16**:204.75-211
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 1.08 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“1.08”
Context: AR26-16**
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AR26-16**Wedge Lake · goldGrade: 2.5Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- AR26-16**
- Project
- Wedge Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- RBZ
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 204.75 m
- To
- 206 m
- Intercept Depth
- 204.75 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- AR26-16**:204.75-206
- Mining Method
- unknown
QA/QC
- Laboratory
- SRC Geoanalytical Laboratories (Saskatchewan Research Council)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-11T00:00:00.000Z
Reasoning: Expanded from assay table: 2.5 au g/t gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit au g/t does not match the gold rubric unit g/t; not scored.
Evidence · table
“2.50”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.