Ashley Gold Corp. Reports First Assays from Phase III Step Out Drilling, Cuts 0.478 g/t Au over 55.00m in TAK-26-14

Original announcement by orestocks on

Company
Ashley Gold Corp.
Ticker
ASHL.CN
Exchange
Unavailable
Region
Ontario
Primary commodity
Gold
Secondary commodities
None reported
Document categories
Drill results
Extracted
2026-09-23 12:15:31 UTC

Analysis by Minestarters Atlas

Minestarters Atlas analysis

Summary

Ashley Gold Corp. has reported initial assays from its Phase III step-out drilling program at the Tak project, with a highlight intercept of 0.478 g/t gold over 55.00 meters in hole TAK-26-14. This intercept is near surface and expands the strike potential of the 67Z zone. The company notes that step-out drilling is ongoing, with five Phase III holes remaining pending and seven Phase IV holes planned. Detailed QA/QC procedures were followed, and the technical information was approved by a Qualified Person.

Reasoning: The document reports initial assays from step-out drilling, with a notable broad intercept in TAK-26-14 expanding the strike potential of a known zone. While the headline grade is modest, the width and near-surface nature are positive for bulk tonnage potential. Detailed QA/QC procedures enhance confidence. However, the lack of true width disclosure and the presence of many low-grade individual assays within the broader intercept temper the overall positive sentiment. The results are novel as they are from new step-out drilling.

Positive factors

  • Headline intercept in TAK-26-14 shows a significant width of gold mineralization near surface, expanding the strike potential of the 67Z zone.
  • Detailed QA/QC procedures are disclosed, including certified lab accreditation and QP sign-off.
  • The drilling is step-out, indicating exploration success in extending known mineralization.

Negative factors

  • The headline grade of 0.478 g/t Au over 55.00m is relatively low for gold, even for bulk tonnage, and is below the project's historical average grade.
  • True width is not disclosed for the reported intercepts, which may overstate actual thickness.
  • Many individual assay intervals within the reported holes show very low gold grades, suggesting significant internal dilution within the broader intercept.

Facts used in scoring: 117

Classification and evidence

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release includes detailed QA/QC disclosure, mentioning ActLabs accreditation to ISO/IEC 17025 standards, insertion of blanks, standards, and duplicates, and review by a Qualified Person.

Evidence · text

“The Company utilizes a drill rig recovering NQ core. All core is sealed in the field by the drill contractor and transported to the core logging facility. Core is then teched and logged by the Company geologist. Prior to geological logging and cutting, all core is systematically inspected and pieced back together until interlocked, depth measurements completed, RQD/Recovery measured, photographed dry and wet, and magnetic susceptibility measurements are taken. Sample intervals are then marked by grease pencil and flagged using ActLabs sample tags. QAQC check samples are inserted every tenth sample consisting of either a blank substrate material, OREAS gold certified standard, or a duplicate is done by quarter cutting the previous sample interval and submitting the other quarter material as the QAQC sample. All samples are cut using a wet saw and placed in pre-labelled sample bags pertaining to the sample interval. When a sample interval is complete, the assay card is added to the respective sample bag and the bag is securely sealed while the matching waterproof tag is permanently stapled into the core box at the end of the sample interval. Rice bags are labelled with the company name, submission batch number, range of sample numbers contained, total number of samples, and rice bag number and range. The secured sample bags are then placed into the rice bags pertaining to the range labelled on the rice bag and then securely fastened with zip ties. Rice bags are stored in a secured shipping container until Company contractors transport completed holes to ActLabs in Dryden, ON for 1A2 Au fire assay.”

QP/CP Signedpositive · Story-specific tag

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: The technical information was reviewed and approved by Shannon Baird, P.Geo., a Qualified Person as defined in NI 43-101.

Evidence · text

“The technical information in this news release was reviewed and approved by Shannon Baird, P.Geo., a Qualified Person as defined in National Instrument 43-101.”

Apparent Width Onlynegative

Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The document reports intercept lengths as downhole widths without stating true widths or drill orientation.

Evidence · text

“True thickness is unknown.”

Step-Out Extensionpositive

Mineralization extended beyond the previously known limit.

Why it applies: The drilling is explicitly described as 'Phase III Step Out Drilling' and 'expanding the strike potential'.

Evidence · text

“First step out assays received from Phase III drilling”

Extracted facts

Stored fact records: 117. Some facts used in scoring do not have a stored record.

Drill Results (117)

TAK-26-14Tak · goldGrade: 0.478Grade Unit: g/tIntercept: 55 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.478
Grade Unit
g/t
Intercept
55 m

Classification

Program
exploration
Sample Type
drill
Mining Method
open_pit

Location

Location
between the 67Z and D99Z
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This headline intercept is notable for its significant width and near-surface location, which is positive for bulk tonnage potential and extends the known mineralization. However, the grade is modest for gold, and the lack of true width information introduces uncertainty. The grade is also substantially lower than the project's historical average, suggesting a different style of mineralization or lower-grade extension.

Positive factors

  • Significant intercept length of 55.0m, indicating broad mineralization.
  • Near-surface mineralization, favorable for potential open-pit mining.
  • Step-out drilling successfully expanded the strike potential of the 67Z zone.

Negative factors

  • The grade of 0.478 g/t Au is relatively low for gold, even for bulk tonnage deposits.
  • True width is unknown, which may overstate the actual thickness of the mineralization.
  • The grade is significantly below the project's historical average grade of 27.805 g/t Au.

Evidence · text

“Cuts 0.478 g/t Au over 55.00m in TAK-26-14”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 0.3 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
0.3 m
From
8.7 m
To
9 m
Intercept Depth
8.7 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:8.7-9
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 0.30

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 1.7Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
1.7
Grade Unit
g/t
Intercept
1.5 m
From
9 m
To
10.5 m
Intercept Depth
9 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:9-10.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, contributing to the overall mineralization but not a standout result.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“1.700”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.109Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.109
Grade Unit
g/t
Intercept
1.5 m
From
10.5 m
To
12 m
Intercept Depth
10.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:10.5-12
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.109”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.035Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.035
Grade Unit
g/t
Intercept
1.25 m
From
12 m
To
13.25 m
Intercept Depth
12 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:12-13.25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.035”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.023Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.023
Grade Unit
g/t
Intercept
1.25 m
From
13.25 m
To
14.5 m
Intercept Depth
13.25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:13.25-14.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.023”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.011Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.011
Grade Unit
g/t
Intercept
1.5 m
From
14.5 m
To
16 m
Intercept Depth
14.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:14.5-16
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.011”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.01Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.5 m
From
16 m
To
17.5 m
Intercept Depth
16 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:16-17.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.010”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.018Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.018
Grade Unit
g/t
Intercept
1.5 m
From
17.5 m
To
19 m
Intercept Depth
17.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:17.5-19
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.018”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.022Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.022
Grade Unit
g/t
Intercept
1 m
From
19 m
To
20 m
Intercept Depth
19 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:19-20
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.022”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.162Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.162
Grade Unit
g/t
Intercept
1 m
From
20 m
To
21 m
Intercept Depth
20 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:20-21
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.162”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.052Grade Unit: g/tIntercept: 0.3 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.052
Grade Unit
g/t
Intercept
0.3 m
From
21 m
To
21.3 m
Intercept Depth
21 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:21-21.3
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.052”

Context: 0.30

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.031Grade Unit: g/tIntercept: 1.1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.031
Grade Unit
g/t
Intercept
1.1 m
From
21.3 m
To
22.4 m
Intercept Depth
21.3 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:21.3-22.4
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.031”

Context: 1.10

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.037Grade Unit: g/tIntercept: 1.1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.037
Grade Unit
g/t
Intercept
1.1 m
From
22.4 m
To
23.5 m
Intercept Depth
22.4 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:22.4-23.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.037”

Context: 1.10

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.005Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.005
Grade Unit
g/t
Intercept
1.5 m
From
23.5 m
To
25 m
Intercept Depth
23.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:23.5-25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.005”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.023Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.023
Grade Unit
g/t
Intercept
1.5 m
From
25 m
To
26.5 m
Intercept Depth
25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:25-26.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.023”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.073Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.073
Grade Unit
g/t
Intercept
1.5 m
From
26.5 m
To
28 m
Intercept Depth
26.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:26.5-28
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.073”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.083Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.083
Grade Unit
g/t
Intercept
1.5 m
From
28 m
To
29.5 m
Intercept Depth
28 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:28-29.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.083”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.023Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.023
Grade Unit
g/t
Intercept
1.5 m
From
29.5 m
To
31 m
Intercept Depth
29.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:29.5-31
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.023”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.013Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.013
Grade Unit
g/t
Intercept
1.5 m
From
31 m
To
32.5 m
Intercept Depth
31 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:31-32.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.013”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.025Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.025
Grade Unit
g/t
Intercept
1.5 m
From
32.5 m
To
34 m
Intercept Depth
32.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:32.5-34
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.025”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.028Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.028
Grade Unit
g/t
Intercept
1.5 m
From
34 m
To
35.5 m
Intercept Depth
34 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:34-35.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.028”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.011Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.011
Grade Unit
g/t
Intercept
1.5 m
From
35.5 m
To
37 m
Intercept Depth
35.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:35.5-37
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.011”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.04Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
1 m
From
37 m
To
38 m
Intercept Depth
37 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:37-38
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.040”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.05Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
1 m
From
38 m
To
39 m
Intercept Depth
38 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:38-39
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.050”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.071Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.071
Grade Unit
g/t
Intercept
1 m
From
39 m
To
40 m
Intercept Depth
39 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:39-40
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.071”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.075Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.075
Grade Unit
g/t
Intercept
1 m
From
40 m
To
41 m
Intercept Depth
40 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:40-41
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.075”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.192Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.192
Grade Unit
g/t
Intercept
1.5 m
From
41 m
To
42.5 m
Intercept Depth
41 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:41-42.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.192”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.154Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.154
Grade Unit
g/t
Intercept
1.5 m
From
42.5 m
To
44 m
Intercept Depth
42.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:42.5-44
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.154”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.565Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.565
Grade Unit
g/t
Intercept
1.5 m
From
44 m
To
45.5 m
Intercept Depth
44 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:44-45.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.565”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.037Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.037
Grade Unit
g/t
Intercept
1.5 m
From
45.5 m
To
47 m
Intercept Depth
45.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:45.5-47
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.037”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.016Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.016
Grade Unit
g/t
Intercept
1 m
From
47 m
To
48 m
Intercept Depth
47 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:47-48
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.016”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.305Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.305
Grade Unit
g/t
Intercept
1.5 m
From
48 m
To
49.5 m
Intercept Depth
48 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:48-49.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.305”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.016Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.016
Grade Unit
g/t
Intercept
1 m
From
49.5 m
To
50.5 m
Intercept Depth
49.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:49.5-50.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.016”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.045Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.045
Grade Unit
g/t
Intercept
1 m
From
50.5 m
To
51.5 m
Intercept Depth
50.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:50.5-51.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.045”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.008Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.008
Grade Unit
g/t
Intercept
1.5 m
From
51.5 m
To
53 m
Intercept Depth
51.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:51.5-53
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.008”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.006Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.006
Grade Unit
g/t
Intercept
1.5 m
From
53 m
To
54.5 m
Intercept Depth
53 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:53-54.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.006”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.008Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.008
Grade Unit
g/t
Intercept
1.5 m
From
54.5 m
To
56 m
Intercept Depth
54.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:54.5-56
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.008”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.006Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.006
Grade Unit
g/t
Intercept
1 m
From
56 m
To
57 m
Intercept Depth
56 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:56-57
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.006”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1 m
From
57 m
To
58 m
Intercept Depth
57 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:57-58
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1 m
From
58 m
To
59 m
Intercept Depth
58 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:58-59
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
59 m
To
60.5 m
Intercept Depth
59 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:59-60.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
60.5 m
To
62 m
Intercept Depth
60.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:60.5-62
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.005Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.005
Grade Unit
g/t
Intercept
1.5 m
From
62 m
To
63.5 m
Intercept Depth
62 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:62-63.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.005”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
63.5 m
To
65 m
Intercept Depth
63.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:63.5-65
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
65 m
To
66.5 m
Intercept Depth
65 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:65-66.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
66.5 m
To
68 m
Intercept Depth
66.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:66.5-68
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.005Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.005
Grade Unit
g/t
Intercept
1.5 m
From
68 m
To
69.5 m
Intercept Depth
68 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:68-69.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.005”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.012Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.012
Grade Unit
g/t
Intercept
1.5 m
From
69.5 m
To
71 m
Intercept Depth
69.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:69.5-71
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.012”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
71 m
To
72.5 m
Intercept Depth
71 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:71-72.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
72.5 m
To
74 m
Intercept Depth
72.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:72.5-74
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
74 m
To
75.5 m
Intercept Depth
74 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:74-75.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
75.5 m
To
77 m
Intercept Depth
75.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:75.5-77
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.5 m
From
77 m
To
78.5 m
Intercept Depth
77 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:77-78.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-13Tak · goldGrade: 0.015Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-13
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.015
Grade Unit
g/t
Intercept
1.5 m
From
78.5 m
To
80 m
Intercept Depth
78.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-13:78.5-80
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.015”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.019Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.019
Grade Unit
g/t
Intercept
1.5 m
From
10 m
To
11.5 m
Intercept Depth
10 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:10-11.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.019”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.005Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.005
Grade Unit
g/t
Intercept
1.5 m
From
11.5 m
To
13 m
Intercept Depth
11.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:11.5-13
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.005”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.073Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.073
Grade Unit
g/t
Intercept
1.5 m
From
13 m
To
14.5 m
Intercept Depth
13 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:13-14.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.073”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.033Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.033
Grade Unit
g/t
Intercept
1.5 m
From
14.5 m
To
16 m
Intercept Depth
14.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:14.5-16
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.033”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.015Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.015
Grade Unit
g/t
Intercept
1.5 m
From
16 m
To
17.5 m
Intercept Depth
16 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:16-17.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.015”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.026Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.026
Grade Unit
g/t
Intercept
1.5 m
From
17.5 m
To
19 m
Intercept Depth
17.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:17.5-19
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.026”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.038Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.038
Grade Unit
g/t
Intercept
1.25 m
From
19 m
To
20.25 m
Intercept Depth
19 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:19-20.25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.038”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.008Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.008
Grade Unit
g/t
Intercept
1.25 m
From
20.25 m
To
21.5 m
Intercept Depth
20.25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:20.25-21.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.008”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.244Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.244
Grade Unit
g/t
Intercept
0.5 m
From
21.5 m
To
22 m
Intercept Depth
21.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:21.5-22
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.244”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.017Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.017
Grade Unit
g/t
Intercept
1.5 m
From
22 m
To
23.5 m
Intercept Depth
22 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:22-23.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.017”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.152Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.152
Grade Unit
g/t
Intercept
1.5 m
From
23.5 m
To
25 m
Intercept Depth
23.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:23.5-25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.152”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.033Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.033
Grade Unit
g/t
Intercept
1 m
From
25 m
To
26 m
Intercept Depth
25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:25-26
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.033”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.015Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.015
Grade Unit
g/t
Intercept
1.5 m
From
26 m
To
27.5 m
Intercept Depth
26 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:26-27.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.015”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.006Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.006
Grade Unit
g/t
Intercept
1.5 m
From
27.5 m
To
29 m
Intercept Depth
27.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:27.5-29
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.006”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.043Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.043
Grade Unit
g/t
Intercept
1 m
From
29 m
To
30 m
Intercept Depth
29 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:29-30
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.043”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.107Grade Unit: g/tIntercept: 1.35 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.107
Grade Unit
g/t
Intercept
1.35 m
From
30 m
To
31.35 m
Intercept Depth
30 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:30-31.35
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.107”

Context: 1.35

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.244Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.244
Grade Unit
g/t
Intercept
1 m
From
31.35 m
To
32.35 m
Intercept Depth
31.35 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:31.35-32.35
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.244”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.044Grade Unit: g/tIntercept: 1.15 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.044
Grade Unit
g/t
Intercept
1.15 m
From
32.35 m
To
33.5 m
Intercept Depth
32.35 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:32.35-33.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.044”

Context: 1.15

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.049Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.049
Grade Unit
g/t
Intercept
1.5 m
From
33.5 m
To
35 m
Intercept Depth
33.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:33.5-35
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.049”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.033Grade Unit: g/tIntercept: 0.85 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.033
Grade Unit
g/t
Intercept
0.85 m
From
35 m
To
35.85 m
Intercept Depth
35 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:35-35.85
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.033”

Context: 0.85

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.172Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.172
Grade Unit
g/t
Intercept
1 m
From
35.85 m
To
36.85 m
Intercept Depth
35.85 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:35.85-36.85
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.172”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 1.59Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
1.59
Grade Unit
g/t
Intercept
1.25 m
From
36.85 m
To
38.1 m
Intercept Depth
36.85 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:36.85-38.1
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“1.590”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.846Grade Unit: g/tIntercept: 1.4 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.846
Grade Unit
g/t
Intercept
1.4 m
From
38.1 m
To
39.5 m
Intercept Depth
38.1 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:38.1-39.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.846”

Context: 1.40

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.142Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.142
Grade Unit
g/t
Intercept
1.5 m
From
39.5 m
To
41 m
Intercept Depth
39.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:39.5-41
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.142”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.041Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.041
Grade Unit
g/t
Intercept
1.5 m
From
41 m
To
42.5 m
Intercept Depth
41 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:41-42.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.041”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.162Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.162
Grade Unit
g/t
Intercept
1.5 m
From
42.5 m
To
44 m
Intercept Depth
42.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:42.5-44
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.162”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.253Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.253
Grade Unit
g/t
Intercept
1 m
From
44 m
To
45 m
Intercept Depth
44 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:44-45
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.253”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.109Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.109
Grade Unit
g/t
Intercept
1 m
From
45 m
To
46 m
Intercept Depth
45 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:45-46
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.109”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.881Grade Unit: g/tIntercept: 0.6 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.881
Grade Unit
g/t
Intercept
0.6 m
From
46 m
To
46.6 m
Intercept Depth
46 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:46-46.6
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.881”

Context: 0.60

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.417Grade Unit: g/tIntercept: 1.4 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.417
Grade Unit
g/t
Intercept
1.4 m
From
46.6 m
To
48 m
Intercept Depth
46.6 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:46.6-48
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.417”

Context: 1.40

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.017Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.017
Grade Unit
g/t
Intercept
1.5 m
From
48 m
To
49.5 m
Intercept Depth
48 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:48-49.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.017”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.097Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.097
Grade Unit
g/t
Intercept
1.5 m
From
49.5 m
To
51 m
Intercept Depth
49.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:49.5-51
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.097”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.19Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.19
Grade Unit
g/t
Intercept
1.5 m
From
51 m
To
52.5 m
Intercept Depth
51 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:51-52.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.190”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.309Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.309
Grade Unit
g/t
Intercept
1.5 m
From
52.5 m
To
54 m
Intercept Depth
52.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:52.5-54
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.309”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 1.56Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
1.56
Grade Unit
g/t
Intercept
1.5 m
From
54 m
To
55.5 m
Intercept Depth
54 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:54-55.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“1.560”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.039Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.039
Grade Unit
g/t
Intercept
1.25 m
From
55.5 m
To
56.75 m
Intercept Depth
55.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:55.5-56.75
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.039”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.082Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.082
Grade Unit
g/t
Intercept
0.5 m
From
56.75 m
To
57.25 m
Intercept Depth
56.75 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:56.75-57.25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.082”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.008Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.008
Grade Unit
g/t
Intercept
1.25 m
From
57.25 m
To
58.5 m
Intercept Depth
57.25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:57.25-58.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.008”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.031Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.031
Grade Unit
g/t
Intercept
1.5 m
From
58.5 m
To
60 m
Intercept Depth
58.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:58.5-60
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.031”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.094Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.094
Grade Unit
g/t
Intercept
1.5 m
From
60 m
To
61.5 m
Intercept Depth
60 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:60-61.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.094”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 4.23Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
4.23
Grade Unit
g/t
Intercept
1.5 m
From
61.5 m
To
63 m
Intercept Depth
61.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:61.5-63
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a strong gold grade over a narrow width, which is a good result and contributes positively to the overall mineralization.

Positive factors

  • Strong gold grade for a narrow interval, indicating a higher-grade zone.

Evidence · table

“4.230”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.039Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.039
Grade Unit
g/t
Intercept
1.5 m
From
63 m
To
64.5 m
Intercept Depth
63 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:63-64.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.039”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.832Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.832
Grade Unit
g/t
Intercept
1.5 m
From
64.5 m
To
66 m
Intercept Depth
64.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:64.5-66
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.832”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 1.09Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
1.09
Grade Unit
g/t
Intercept
1.5 m
From
66 m
To
67.5 m
Intercept Depth
66 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:66-67.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“1.090”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 2.99Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
2.99
Grade Unit
g/t
Intercept
1 m
From
67.5 m
To
68.5 m
Intercept Depth
67.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:67.5-68.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a strong gold grade over a narrow width, which is a good result and contributes positively to the overall mineralization.

Positive factors

  • Strong gold grade for a narrow interval, indicating a higher-grade zone.

Evidence · table

“2.990”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.602Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.602
Grade Unit
g/t
Intercept
1.5 m
From
68.5 m
To
70 m
Intercept Depth
68.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:68.5-70
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.602”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.488Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.488
Grade Unit
g/t
Intercept
1 m
From
70 m
To
71 m
Intercept Depth
70 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:70-71
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.488”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.014Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.014
Grade Unit
g/t
Intercept
1.5 m
From
71 m
To
72.5 m
Intercept Depth
71 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:71-72.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.014”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.007Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.007
Grade Unit
g/t
Intercept
1.5 m
From
72.5 m
To
74 m
Intercept Depth
72.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:72.5-74
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.007”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.003Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.003
Grade Unit
g/t
Intercept
1.25 m
From
74 m
To
75.25 m
Intercept Depth
74 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:74-75.25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.003”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.023Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.023
Grade Unit
g/t
Intercept
1.25 m
From
75.25 m
To
76.5 m
Intercept Depth
75.25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:75.25-76.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.023”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.01Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.25 m
From
76.5 m
To
77.75 m
Intercept Depth
76.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:76.5-77.75
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.010”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.121Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.121
Grade Unit
g/t
Intercept
1.25 m
From
77.75 m
To
79 m
Intercept Depth
77.75 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:77.75-79
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.121”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.614Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.614
Grade Unit
g/t
Intercept
1 m
From
79 m
To
80 m
Intercept Depth
79 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:79-80
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.614”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.687Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.687
Grade Unit
g/t
Intercept
1 m
From
80 m
To
81 m
Intercept Depth
80 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:80-81
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.687”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.118Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.118
Grade Unit
g/t
Intercept
1 m
From
81 m
To
82 m
Intercept Depth
81 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:81-82
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.118”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.831Grade Unit: g/tIntercept: 1.25 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.831
Grade Unit
g/t
Intercept
1.25 m
From
82 m
To
83.25 m
Intercept Depth
82 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:82-83.25
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.831”

Context: 1.25

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.342Grade Unit: g/tIntercept: 0.9 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.342
Grade Unit
g/t
Intercept
0.9 m
From
83.25 m
To
84.15 m
Intercept Depth
83.25 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:83.25-84.15
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a moderate gold grade over a narrow width, which is a decent result for this type of mineralization.

Positive factors

  • Moderate gold grade for a narrow interval.

Evidence · table

“0.342”

Context: 0.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.271Grade Unit: g/tIntercept: 0.85 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.271
Grade Unit
g/t
Intercept
0.85 m
From
84.15 m
To
85 m
Intercept Depth
84.15 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:84.15-85
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a low gold grade, which is not economically significant.

Negative factors

  • Low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.271”

Context: 0.85

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
85 m
To
86 m
Intercept Depth
85 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:85-86
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.020”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.012Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.012
Grade Unit
g/t
Intercept
1.5 m
From
86 m
To
87.5 m
Intercept Depth
86 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:86-87.5
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.012”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TAK-26-14Tak · goldGrade: 0.006Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TAK-26-14
Project
Tak
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
ASHL.CN

Geometry

Grade
0.006
Grade Unit
g/t
Intercept
1.5 m
From
87.5 m
To
89 m
Intercept Depth
87.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TAK-26-14:87.5-89
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories (ActLabs)
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-23T00:00:00.000Z

Reasoning: This interval shows a very low gold grade, which is not economically significant.

Negative factors

  • Very low gold grade, indicating no significant mineralization in this interval.

Evidence · table

“0.006”

Context: 1.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.