Aztec Drills 1.08 gpt Au and 30.23 gpt Ag (1.63 gpt AuEq) over 155.4 meters, Expands Oxide Gold-Silver Zone at Tombstone Project, Arizona
Original announcement by tmx on
- Company
- Aztec Minerals Corp.
- Ticker
- AZT
- Exchange
- TSX
- Region
- Arizona
- Primary commodity
- Gold
- Secondary commodities
- Silver, Lead, Zinc
- Document categories
- Drill results, Metallurgy
- Extracted
- 2026-09-19 10:41:23 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Aztec Minerals reports significant drill results from its Tombstone Project in Arizona, including a bonanza intercept of 155.4 meters averaging 1.08 gpt gold and 30.23 gpt silver (1.63 gpt AuEq) in hole TR26-30. The 2025-2026 drill program successfully expanded the oxide gold-silver mineralization along strike and at depth, confirming broad continuity and identifying new targets. The company also provided initial core drilling results and disclosed metal equivalent calculation parameters, though metallurgical testwork remains preliminary.
Reasoning: The drill results demonstrate significant expansion of the oxide gold-silver zone at the Tombstone Project, highlighted by a bonanza intercept in TR26-30. The program successfully extended mineralization both laterally and at depth, confirming continuity and identifying new targets. While QA/QC is disclosed and metal equivalent assumptions are transparent, the lack of true width information and preliminary nature of metallurgical testwork introduce some uncertainty.
Positive factors
- Exceptional gold-silver intercept in TR26-30 (155.4m at 1.08 gpt Au and 30.23 gpt Ag) significantly expands oxide mineralization at depth.
- Step-out drilling successfully extended mineralization to the west, southwest, and south, indicating potential for further growth.
- Broad continuity of the mineralized zone confirmed in the central Contention area.
- QA/QC procedures are disclosed, including certified lab and QP sign-off, enhancing data credibility.
- Metal equivalent assumptions are clearly disclosed, allowing for transparent evaluation.
Negative factors
- True width is not disclosed for any intercepts, which may overstate actual thickness.
- Some drill holes reported 'no results with values of interest' or 'no sample' within intervals, indicating barren sections or gaps.
- Metallurgical testwork is still preliminary (bottle roll) and does not provide recovery percentages, limiting confidence in processing assumptions for AuEq calculations.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 210
Classification and evidence
Heap Leach Routeneutral
Processing via heap leach — lower CAPEX and OPEX, lower recovery expected.
Why it applies: the document describes a heap_leach route ("heap leach")
Extracted facts
Stored fact records: 210. Some facts used in scoring do not have a stored record.
Drill Results (210)
TR26-20Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 21.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.8 m
- To
- 73.1 m
- Hole Depth
- 219.5 m
- Intercept Depth
- 51.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-20:51.8-73.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 587987
- Northing
- 3507387
- Azimuth
- 84 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the Independence Mine target area, representing a step-out from previously reported drilling. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.08”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-20Tombstone · silverGrade: 9.04Grade Unit: g/tIntercept: 21.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.04
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.8 m
- To
- 73.1 m
- Hole Depth
- 219.5 m
- Intercept Depth
- 51.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-20:51.8-73.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 587987
- Northing
- 3507387
- Azimuth
- 84 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the Independence Mine target area, representing a step-out from previously reported drilling. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“9.04”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-20Tombstone · goldGrade: 0.24Grade Unit: g/tIntercept: 4.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 51.8 m
- To
- 56.4 m
- Hole Depth
- 219.5 m
- Intercept Depth
- 51.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-20:51.8-56.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 587987
- Northing
- 3507387
- Azimuth
- 84 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.67
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval, while low-grade for gold, contributes to the expansion of mineralization in the Independence Mine target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.24”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-20Tombstone · silverGrade: 23.37Grade Unit: g/tIntercept: 4.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 23.37
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 51.8 m
- To
- 56.4 m
- Hole Depth
- 219.5 m
- Intercept Depth
- 51.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-20:51.8-56.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 587987
- Northing
- 3507387
- Azimuth
- 84 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.67
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval, with moderate silver grade, contributes to the expansion of mineralization in the Independence Mine target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“23.37”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-20Tombstone · goldGrade: 0.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 94.5 m
- To
- 100.6 m
- Hole Depth
- 219.5 m
- Intercept Depth
- 94.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-20:94.5-100.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 587987
- Northing
- 3507387
- Azimuth
- 84 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.03”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-20Tombstone · silverGrade: 7.98Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.98
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 94.5 m
- To
- 100.6 m
- Hole Depth
- 219.5 m
- Intercept Depth
- 94.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-20:94.5-100.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 587987
- Northing
- 3507387
- Azimuth
- 84 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“7.98”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-21Tombstone · goldGrade: 0.05Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 18.3 m
- To
- 36.6 m
- Hole Depth
- 146.4 m
- Intercept Depth
- 18.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-21:18.3-36.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588038
- Northing
- 3507523
- Azimuth
- 106 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the Independence Mine target area, representing a step-out from previously reported drilling. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.05”
Context: 18.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-21Tombstone · silverGrade: 19.03Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 19.03
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 18.3 m
- To
- 36.6 m
- Hole Depth
- 146.4 m
- Intercept Depth
- 18.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-21:18.3-36.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588038
- Northing
- 3507523
- Azimuth
- 106 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the Independence Mine target area, representing a step-out from previously reported drilling. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“19.03”
Context: 18.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-21Tombstone · silverGrade: 58.6Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 58.6
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 19.8 m
- To
- 24.4 m
- Hole Depth
- 146.4 m
- Intercept Depth
- 19.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-21:19.8-24.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588038
- Northing
- 3507523
- Azimuth
- 106 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.13
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“58.60”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-21Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 19.8 m
- To
- 24.4 m
- Hole Depth
- 146.4 m
- Intercept Depth
- 19.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-21:19.8-24.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588038
- Northing
- 3507523
- Azimuth
- 106 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.13
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows low gold grade, but contributes to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.06”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-22Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 0 m
- To
- 4.6 m
- Hole Depth
- 91.4 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-22:0-4.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588034
- Northing
- 3507523
- Azimuth
- 43 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.09”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-22Tombstone · silverGrade: 4.23Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.23
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 0 m
- To
- 4.6 m
- Hole Depth
- 91.4 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-22:0-4.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588034
- Northing
- 3507523
- Azimuth
- 43 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“4.23”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-22Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 4.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 44.2 m
- To
- 48.8 m
- Hole Depth
- 91.4 m
- Intercept Depth
- 44.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-22:44.2-48.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588034
- Northing
- 3507523
- Azimuth
- 43 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.08”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-22Tombstone · silverGrade: 4.67Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.67
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 44.2 m
- To
- 48.8 m
- Hole Depth
- 91.4 m
- Intercept Depth
- 44.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-22:44.2-48.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Easting
- 588034
- Northing
- 3507523
- Azimuth
- 43 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“4.67”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-23Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 16.8 m
- To
- 39.7 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 16.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-23:16.8-39.7
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588160
- Northing
- 3507618
- Azimuth
- 118 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the Hard Up target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.13”
Context: 22.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-23Tombstone · silverGrade: 13.04Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.04
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 16.8 m
- To
- 39.7 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 16.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-23:16.8-39.7
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588160
- Northing
- 3507618
- Azimuth
- 118 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the Hard Up target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“13.04”
Context: 22.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-23Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 59.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-23:59.4-64
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588160
- Northing
- 3507618
- Azimuth
- 118 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.04”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-23Tombstone · silverGrade: 3.73Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.73
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 59.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-23:59.4-64
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588160
- Northing
- 3507618
- Azimuth
- 118 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“3.73”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-23Tombstone · goldGrade: 0.12Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 147.8 m
- To
- 150.8 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 147.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-23:147.8-150.8
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588160
- Northing
- 3507618
- Azimuth
- 118 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.15
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.12”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-23Tombstone · silverGrade: 1.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 147.8 m
- To
- 150.8 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 147.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-23:147.8-150.8
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588160
- Northing
- 3507618
- Azimuth
- 118 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.15
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“1.70”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 12.2 m
- To
- 19.8 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 12.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:12.2-19.8
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.34
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.06”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · silverGrade: 15.46Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 15.46
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 12.2 m
- To
- 19.8 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 12.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:12.2-19.8
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.34
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“15.46”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · goldGrade: 0.07Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 114.3 m
- To
- 121.9 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 114.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:114.3-121.9
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.07”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · silverGrade: 6.12Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.12
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 114.3 m
- To
- 121.9 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 114.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:114.3-121.9
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“6.12”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 242.3 m
- To
- 257.5 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 242.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:242.3-257.5
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.04”
Context: 15.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · silverGrade: 7.86Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.86
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 242.3 m
- To
- 257.5 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 242.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:242.3-257.5
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“7.86”
Context: 15.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 275.8 m
- To
- 278.8 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 275.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:275.8-278.8
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.19
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.16”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-24Tombstone · silverGrade: 1.85Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.85
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 275.8 m
- To
- 278.8 m
- Hole Depth
- 304.8 m
- Intercept Depth
- 275.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-24:275.8-278.8
- Mining Method
- open_pit
Location
- Location
- Hard Up
- Easting
- 588111
- Northing
- 3507690
- Azimuth
- 108 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.19
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“1.85”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-26Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 13.7 m
- To
- 18.3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 13.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-26:13.7-18.3
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588803
- Northing
- 3507311
- Azimuth
- 276 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the East side Grand Central Pit target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.16”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-26Tombstone · silverGrade: 18.2Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 18.2
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 13.7 m
- To
- 18.3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 13.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-26:13.7-18.3
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588803
- Northing
- 3507311
- Azimuth
- 276 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the East side Grand Central Pit target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“18.2”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-26Tombstone · goldGrade: 0.34Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 125 m
- To
- 135.6 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 125 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-26:125-135.6
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588803
- Northing
- 3507311
- Azimuth
- 276 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the East side Grand Central Pit target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.34”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-26Tombstone · silverGrade: 19.36Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 19.36
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 125 m
- To
- 135.6 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 125 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-26:125-135.6
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588803
- Northing
- 3507311
- Azimuth
- 276 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the East side Grand Central Pit target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“19.36”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 35.1 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 35.1 m
- From
- 155.4 m
- To
- 190.5 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 155.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:155.4-190.5
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.04”
Context: 35.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · silverGrade: 5.33Grade Unit: g/tIntercept: 35.1 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.33
- Grade Unit
- g/t
- Intercept
- 35.1 m
- From
- 155.4 m
- To
- 190.5 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 155.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:155.4-190.5
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“5.33”
Context: 35.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · goldGrade: 0.2Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 199.6 m
- To
- 219.4 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 199.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:199.6-219.4
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.57
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the East side Grand Central Pit target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.20”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · silverGrade: 20.28Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 20.28
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 199.6 m
- To
- 219.4 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 199.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:199.6-219.4
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.57
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the East side Grand Central Pit target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“20.28”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · goldGrade: 0.34Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 208.8 m
- To
- 219.4 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 208.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:208.8-219.4
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Moderate gold grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.34”
Context: 10.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · silverGrade: 33.5Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 33.5
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 208.8 m
- To
- 219.4 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 208.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:208.8-219.4
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“33.50”
Context: 10.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · goldGrade: 0.05Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 239.3 m
- To
- 242.3 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 239.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:239.3-242.3
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.05”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-28Tombstone · silverGrade: 4.1Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 239.3 m
- To
- 242.3 m
- Hole Depth
- 254.5 m
- Intercept Depth
- 239.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-28:239.3-242.3
- Mining Method
- open_pit
Location
- Location
- East side Grand Central Pit
- Easting
- 588797
- Northing
- 3507403
- Azimuth
- 196 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“4.10”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-29Tombstone · goldGrade: 0.1Grade Unit: g/tIntercept: 29 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 131.1 m
- To
- 160.1 m
- Hole Depth
- 243.8 m
- Intercept Depth
- 131.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-29:131.1-160.1
- Mining Method
- open_pit
Location
- Location
- Eastern side of the Little Joe area
- Easting
- 588856
- Northing
- 3507549
- Azimuth
- 272 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the Little Joe area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.10”
Context: 29.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-29Tombstone · silverGrade: 8.84Grade Unit: g/tIntercept: 29 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.84
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 131.1 m
- To
- 160.1 m
- Hole Depth
- 243.8 m
- Intercept Depth
- 131.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-29:131.1-160.1
- Mining Method
- open_pit
Location
- Location
- Eastern side of the Little Joe area
- Easting
- 588856
- Northing
- 3507549
- Azimuth
- 272 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the Little Joe area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“8.84”
Context: 29.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-29Tombstone · goldGrade: 0.44Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 144.8 m
- To
- 149.4 m
- Hole Depth
- 243.8 m
- Intercept Depth
- 144.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-29:144.8-149.4
- Mining Method
- open_pit
Location
- Location
- Eastern side of the Little Joe area
- Easting
- 588856
- Northing
- 3507549
- Azimuth
- 272 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Moderate gold grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.44”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-29Tombstone · silverGrade: 28.1Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 28.1
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 144.8 m
- To
- 149.4 m
- Hole Depth
- 243.8 m
- Intercept Depth
- 144.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-29:144.8-149.4
- Mining Method
- open_pit
Location
- Location
- Eastern side of the Little Joe area
- Easting
- 588856
- Northing
- 3507549
- Azimuth
- 272 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“28.10”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-29Tombstone · goldGrade: 0.14Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 175.3 m
- To
- 179.9 m
- Hole Depth
- 243.8 m
- Intercept Depth
- 175.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-29:175.3-179.9
- Mining Method
- open_pit
Location
- Location
- Eastern side of the Little Joe area
- Easting
- 588856
- Northing
- 3507549
- Azimuth
- 272 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the overall mineralization in the Little Joe area. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.14”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-29Tombstone · silverGrade: 8.6Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.6
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 175.3 m
- To
- 179.9 m
- Hole Depth
- 243.8 m
- Intercept Depth
- 175.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-29:175.3-179.9
- Mining Method
- open_pit
Location
- Location
- Eastern side of the Little Joe area
- Easting
- 588856
- Northing
- 3507549
- Azimuth
- 272 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with low silver grade, contributes to the overall mineralization in the Little Joe area. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“8.60”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · goldGrade: 0.86Grade Unit: g/tIntercept: 198.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 198.1 m
- From
- 0 m
- To
- 198.1 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:0-198.1
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.3
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept represents an exceptional gold grade over a significant width, demonstrating strong mineralization and extending the oxide zone to depth. QA/QC is disclosed, but true width is not.
Positive factors
- Exceptional gold grade over a significant width, indicating strong mineralization.
- Intercept extends oxide mineralization vertically to depth, more than doubling previously demonstrated depth.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.86”
Context: 198.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · silverGrade: 24.52Grade Unit: g/tIntercept: 198.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 24.52
- Grade Unit
- g/t
- Intercept
- 198.1 m
- From
- 0 m
- To
- 198.1 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:0-198.1
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.3
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept represents a strong silver grade over a significant width, demonstrating strong mineralization and extending the oxide zone to depth. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade over a significant width, indicating strong mineralization.
- Intercept extends oxide mineralization vertically to depth, more than doubling previously demonstrated depth.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“24.52”
Context: 198.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · goldGrade: 1.08Grade Unit: g/tIntercept: 155.4 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 155.4 m
- From
- 6.1 m
- To
- 161.5 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 6.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:6.1-161.5
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.63
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept is a bonanza result with exceptional gold grade over a significant width, representing a major step-out extension of the oxide zone. QA/QC is disclosed, but true width is not.
Positive factors
- Bonanza Intercept: Exceptional gold grade over a significant width.
- Step-Out Extension: Extends oxide mineralization vertically to depth.
- QA/QC Disclosed: Procedures enhance data credibility.
Negative factors
- Apparent Width Only: True width not disclosed.
Evidence · table
“1.08”
Context: 155.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · silverGrade: 30.23Grade Unit: g/tIntercept: 155.4 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 30.23
- Grade Unit
- g/t
- Intercept
- 155.4 m
- From
- 6.1 m
- To
- 161.5 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 6.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:6.1-161.5
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.63
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a significant width, representing a major step-out extension of the oxide zone. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade over a significant width.
- Step-Out Extension: Extends oxide mineralization vertically to depth.
- QA/QC Disclosed: Procedures enhance data credibility.
Negative factors
- Apparent Width Only: True width not disclosed.
Evidence · table
“30.23”
Context: 155.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · goldGrade: 1.51Grade Unit: g/tIntercept: 16.8 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.51
- Grade Unit
- g/t
- Intercept
- 16.8 m
- From
- 24.4 m
- To
- 41.2 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 24.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:24.4-41.2
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.56
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade, significantly contributing to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Exceptional gold grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“1.51”
Context: 16.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · silverGrade: 58.04Grade Unit: g/tIntercept: 16.8 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 58.04
- Grade Unit
- g/t
- Intercept
- 16.8 m
- From
- 24.4 m
- To
- 41.2 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 24.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:24.4-41.2
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.56
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade, significantly contributing to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“58.04”
Context: 16.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · goldGrade: 1.5Grade Unit: g/tIntercept: 44.2 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 44.2 m
- From
- 56.4 m
- To
- 100.6 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 56.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:56.4-100.6
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.6
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a significant width, significantly contributing to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Exceptional gold grade over a significant width in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“1.50”
Context: 44.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · silverGrade: 60.51Grade Unit: g/tIntercept: 44.2 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 60.51
- Grade Unit
- g/t
- Intercept
- 44.2 m
- From
- 56.4 m
- To
- 100.6 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 56.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:56.4-100.6
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.6
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade over a significant width, significantly contributing to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade over a significant width in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“60.51”
Context: 44.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · goldGrade: 9.54Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.54
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 121.9 m
- To
- 128 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 121.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:121.9-128
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 10.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval is a bonanza result with exceptional gold grade, significantly contributing to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Bonanza Intercept: Exceptional gold grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Apparent Width Only: True width not disclosed.
Evidence · table
“9.54”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-30Tombstone · silverGrade: 35.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 35.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 121.9 m
- To
- 128 m
- Hole Depth
- 201.2 m
- Intercept Depth
- 121.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-30:121.9-128
- Mining Method
- open_pit
Location
- Location
- Contention target area
- Easting
- 588817
- Northing
- 3507812
- Azimuth
- 104 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 10.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade, significantly contributing to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“35.03”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-01by drilling from west to easterly across the Contention · goldGrade: 0.01Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-01
- Project
- by drilling from west to easterly across the Contention
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 256 m
- To
- 268.2 m
- Hole Depth
- 373.4 m
- Intercept Depth
- 256 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-01:256-268.2
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588540
- Northing
- 3507253
- Azimuth
- 90 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.01”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-01by drilling from west to easterly across the Contention · silverGrade: 4.7Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-01
- Project
- by drilling from west to easterly across the Contention
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.7
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 256 m
- To
- 268.2 m
- Hole Depth
- 373.4 m
- Intercept Depth
- 256 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-01:256-268.2
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588540
- Northing
- 3507253
- Azimuth
- 90 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“4.70”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-02from west to southeasterly across the Contention · goldGrade: 0.03Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-02
- Project
- from west to southeasterly across the Contention
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 341.7 m
- To
- 344.7 m
- Hole Depth
- 348.4 m
- Intercept Depth
- 341.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-02:341.7-344.7
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588716
- Northing
- 3507534
- Azimuth
- 125 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.03”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-02from west to southeasterly across the Contention · silverGrade: 10.6Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-02
- Project
- from west to southeasterly across the Contention
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.6
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 341.7 m
- To
- 344.7 m
- Hole Depth
- 348.4 m
- Intercept Depth
- 341.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-02:341.7-344.7
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588716
- Northing
- 3507534
- Azimuth
- 125 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“10.60”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 10.1 m
- From
- 183.5 m
- To
- 193.6 m
- Hole Depth
- 691 m
- Intercept Depth
- 183.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:183.5-193.6
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the North CRD target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.16”
Context: 10.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · silverGrade: 12.72Grade Unit: g/tIntercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.72
- Grade Unit
- g/t
- Intercept
- 10.1 m
- From
- 183.5 m
- To
- 193.6 m
- Hole Depth
- 691 m
- Intercept Depth
- 183.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:183.5-193.6
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the North CRD target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“12.72”
Context: 10.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 4.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 202.7 m
- To
- 207.3 m
- Hole Depth
- 691 m
- Intercept Depth
- 202.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:202.7-207.3
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.08”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · silverGrade: 5.57Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.57
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 202.7 m
- To
- 207.3 m
- Hole Depth
- 691 m
- Intercept Depth
- 202.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:202.7-207.3
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“5.57”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 213.4 m
- To
- 225.6 m
- Hole Depth
- 691 m
- Intercept Depth
- 213.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:213.4-225.6
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.04”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · silverGrade: 14.2Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 14.2
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 213.4 m
- To
- 225.6 m
- Hole Depth
- 691 m
- Intercept Depth
- 213.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:213.4-225.6
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“14.20”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 379.5 m
- To
- 384.1 m
- Hole Depth
- 691 m
- Intercept Depth
- 379.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:379.5-384.1
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.06”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · silverGrade: 5.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 379.5 m
- To
- 384.1 m
- Hole Depth
- 691 m
- Intercept Depth
- 379.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:379.5-384.1
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“5.5”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · leadGrade: 0.44Grade Unit: %Intercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- lead
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 4.6 m
- From
- 379.5 m
- To
- 384.1 m
- Hole Depth
- 691 m
- Intercept Depth
- 379.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:379.5-384.1
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a lead grade, indicating polymetallic mineralization in the CRD target. QA/QC is disclosed, but true width is not.
Positive factors
- Lead grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.44”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · zincGrade: 0.28Grade Unit: %Intercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- zinc
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 4.6 m
- From
- 379.5 m
- To
- 384.1 m
- Hole Depth
- 691 m
- Intercept Depth
- 379.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:379.5-384.1
- Mining Method
- open_pit
Location
- Location
- North CRD target
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a zinc grade, indicating polymetallic mineralization in the CRD target. QA/QC is disclosed, but true width is not.
Positive factors
- Zinc grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.28”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · goldGrade: 0.64Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 545.6 m
- To
- 550.2 m
- Hole Depth
- 691 m
- Intercept Depth
- 545.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:545.6-550.2
- Mining Method
- open_pit
Location
- Location
- T-8 CRD target horizon
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade in the T-8 CRD target horizon. QA/QC is disclosed, but true width is not.
Positive factors
- Moderate gold grade in CRD target.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.64”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · silverGrade: 2.65Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.65
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 545.6 m
- To
- 550.2 m
- Hole Depth
- 691 m
- Intercept Depth
- 545.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:545.6-550.2
- Mining Method
- open_pit
Location
- Location
- T-8 CRD target horizon
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“2.65”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · leadGrade: 0.21Grade Unit: %Intercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- lead
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 4.6 m
- From
- 545.6 m
- To
- 550.2 m
- Hole Depth
- 691 m
- Intercept Depth
- 545.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:545.6-550.2
- Mining Method
- open_pit
Location
- Location
- T-8 CRD target horizon
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a lead grade, indicating polymetallic mineralization in the CRD target. QA/QC is disclosed, but true width is not.
Positive factors
- Lead grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.21”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-03Tombstone · zincGrade: 0.02Grade Unit: %Intercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- zinc
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.6 m
- From
- 545.6 m
- To
- 550.2 m
- Hole Depth
- 691 m
- Intercept Depth
- 545.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-03:545.6-550.2
- Mining Method
- open_pit
Location
- Location
- T-8 CRD target horizon
- Easting
- 588661
- Northing
- 3508034
- Azimuth
- 75 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low zinc grade, indicating limited polymetallic mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low zinc grade.
- True width not disclosed.
Evidence · table
“0.02”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 303.3 m
- To
- 309.4 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 303.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:303.3-309.4
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.04”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · silverGrade: 3.93Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.93
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 303.3 m
- To
- 309.4 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 303.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:303.3-309.4
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“3.93”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · goldGrade: 0.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 317 m
- To
- 323.1 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 317 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:317-323.1
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.03”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · silverGrade: 4.53Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.53
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 317 m
- To
- 323.1 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 317 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:317-323.1
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“4.53”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 32 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 336.8 m
- To
- 368.8 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 336.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:336.8-368.8
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the expansion of mineralization in the South AMT target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.08”
Context: 32.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · silverGrade: 9.96Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.96
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 336.8 m
- To
- 368.8 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 336.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:336.8-368.8
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the expansion of mineralization in the South AMT target area. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization in a new target area.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“9.96”
Context: 32.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · leadGrade: 0.15Grade Unit: %Intercept: 32 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- lead
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 32 m
- From
- 336.8 m
- To
- 368.8 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 336.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:336.8-368.8
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a lead grade, indicating polymetallic mineralization in the South AMT target. QA/QC is disclosed, but true width is not.
Positive factors
- Lead grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.15”
Context: 32.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · zincGrade: 0.12Grade Unit: %Intercept: 32 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- zinc
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 32 m
- From
- 336.8 m
- To
- 368.8 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 336.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:336.8-368.8
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows a zinc grade, indicating polymetallic mineralization in the South AMT target. QA/QC is disclosed, but true width is not.
Positive factors
- Zinc grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.12”
Context: 32.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · goldGrade: 0.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 338.3 m
- To
- 341.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 338.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:338.3-341.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Moderate gold grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.53”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · silverGrade: 35.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 35.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 338.3 m
- To
- 341.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 338.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:338.3-341.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade, contributing positively to the overall intercept. QA/QC is disclosed, but true width is not.
Positive factors
- Strong silver grade in sub-interval.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“35.50”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · leadGrade: 0.58Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- lead
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 3 m
- From
- 338.3 m
- To
- 341.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 338.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:338.3-341.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a lead grade, indicating polymetallic mineralization in the South AMT target. QA/QC is disclosed, but true width is not.
Positive factors
- Lead grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.58”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · zincGrade: 0.24Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- zinc
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 3 m
- From
- 338.3 m
- To
- 341.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 338.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:338.3-341.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.18
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This sub-interval shows a zinc grade, indicating polymetallic mineralization in the South AMT target. QA/QC is disclosed, but true width is not.
Positive factors
- Zinc grade indicates polymetallic mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“0.24”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 393.2 m
- To
- 399.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 393.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:393.2-399.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.09”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · silverGrade: 8.25Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.25
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 393.2 m
- To
- 399.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 393.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:393.2-399.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“8.25”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 495.3 m
- To
- 498.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 495.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:495.3-498.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.13”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TC25-04Tombstone · silverGrade: 8.55Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.55
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 495.3 m
- To
- 498.3 m
- Hole Depth
- 831.5 m
- Intercept Depth
- 495.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TC25-04:495.3-498.3
- Mining Method
- open_pit
Location
- Location
- South AMT target
- Easting
- 588856
- Northing
- 3507422
- Azimuth
- 123 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“8.55”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-01Tombstone · goldGrade: 0.038Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.038
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.7 m
- To
- 72.9 m
- Intercept Depth
- 51.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-01:51.7-72.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.208
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.038”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-01Tombstone · silverGrade: 11.76Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.76
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.7 m
- To
- 72.9 m
- Intercept Depth
- 51.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-01:51.7-72.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.208
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“11.76”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-01Tombstone · goldGrade: 0.039Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.039
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 86.6 m
- To
- 110.9 m
- Intercept Depth
- 86.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-01:86.6-110.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.039”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-01Tombstone · silverGrade: 13.37Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.37
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 86.6 m
- To
- 110.9 m
- Intercept Depth
- 86.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-01:86.6-110.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“13.37”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · goldGrade: 0.136Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.136
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 0 m
- To
- 19.8 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:0-19.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.316
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the overall mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.136”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · silverGrade: 12.62Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.62
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 0 m
- To
- 19.8 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:0-19.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.316
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with moderate silver grade, contributes to the overall mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“12.62”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · goldGrade: 0.088Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.088
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 54.7 m
- To
- 60.8 m
- Intercept Depth
- 54.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:54.7-60.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.284
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.088”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · silverGrade: 13.67Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.67
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 54.7 m
- To
- 60.8 m
- Intercept Depth
- 54.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:54.7-60.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.284
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“13.67”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · goldGrade: 0.094Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.094
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 91.2 m
- To
- 100.3 m
- Intercept Depth
- 91.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:91.2-100.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.094”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · silverGrade: 5.65Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.65
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 91.2 m
- To
- 100.3 m
- Intercept Depth
- 91.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:91.2-100.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“5.65”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · goldGrade: 0.076Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.076
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 130.7 m
- To
- 147.4 m
- Intercept Depth
- 130.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:130.7-147.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.115
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.076”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-02Tombstone · silverGrade: 2.76Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.76
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 130.7 m
- To
- 147.4 m
- Intercept Depth
- 130.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-02:130.7-147.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.115
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“2.76”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-03Tombstone · goldGrade: 0.069Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.069
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-03:147.4-161.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.122
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.069”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-03Tombstone · silverGrade: 3.73Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.73
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-03:147.4-161.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.122
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“3.73”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-03Tombstone · goldGrade: 0.103Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.103
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 167.2 m
- To
- 177.8 m
- Intercept Depth
- 167.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-03:167.2-177.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.206
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.103”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-03Tombstone · silverGrade: 7.21Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.21
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 167.2 m
- To
- 177.8 m
- Intercept Depth
- 167.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-03:167.2-177.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.206
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“7.21”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-03Tombstone · goldGrade: 0.149Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.149
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 193 m
- To
- 205.2 m
- Intercept Depth
- 193 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-03:193-205.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.273
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low gold grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.149”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-03Tombstone · silverGrade: 8.7Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.7
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 193 m
- To
- 205.2 m
- Intercept Depth
- 193 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-03:193-205.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.273
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“8.7”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-04Tombstone · goldGrade: 0.057Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.057
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 53.2 m
- To
- 63.8 m
- Intercept Depth
- 53.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-04:53.2-63.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.173
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.057”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-04Tombstone · silverGrade: 8.17Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.17
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 53.2 m
- To
- 63.8 m
- Intercept Depth
- 53.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-04:53.2-63.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.173
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“8.17”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-04Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-04:147.4-161.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.040”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-04Tombstone · silverGrade: 4.16Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.16
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-04:147.4-161.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“4.16”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-04Tombstone · goldGrade: 0.22Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 168.7 m
- To
- 188.5 m
- Intercept Depth
- 168.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-04:168.7-188.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.416
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low gold grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.220”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-04Tombstone · silverGrade: 13.75Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.75
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 168.7 m
- To
- 188.5 m
- Intercept Depth
- 168.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-04:168.7-188.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.416
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“13.75”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · goldGrade: 0.223Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 16.7 m
- To
- 36.5 m
- Intercept Depth
- 16.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:16.7-36.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.358
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the overall mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.223”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · silverGrade: 8.78Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.78
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 16.7 m
- To
- 36.5 m
- Intercept Depth
- 16.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:16.7-36.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.358
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with low silver grade, contributes to the overall mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“8.78”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · goldGrade: 0.117Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.117
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 60.8 m
- To
- 73 m
- Intercept Depth
- 60.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:60.8-73
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.172
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low gold grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low gold grade.
- True width not disclosed.
Evidence · table
“0.117”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · silverGrade: 3.85Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.85
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 60.8 m
- To
- 73 m
- Intercept Depth
- 60.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:60.8-73
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.172
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, indicating limited mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Very low silver grade.
- True width not disclosed.
Evidence · table
“3.85”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · goldGrade: 0.112Grade Unit: g/tIntercept: 50.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.112
- Grade Unit
- g/t
- Intercept
- 50.2 m
- From
- 80.6 m
- To
- 130.7 m
- Intercept Depth
- 80.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:80.6-130.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, while low-grade for gold, contributes to the overall mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.112”
Context: 50.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · silverGrade: 4.9Grade Unit: g/tIntercept: 50.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.9
- Grade Unit
- g/t
- Intercept
- 50.2 m
- From
- 80.6 m
- To
- 130.7 m
- Intercept Depth
- 80.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:80.6-130.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept, with low silver grade, contributes to the overall mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- Intercept contributes to expansion of mineralization.
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low silver grade.
- True width not disclosed.
Evidence · table
“4.90”
Context: 50.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · goldGrade: 0.117Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.117
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 136.8 m
- To
- 158.1 m
- Intercept Depth
- 136.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:136.8-158.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows low gold grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- Low gold grade.
- True width not disclosed.
Evidence · table
“0.117”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · silverGrade: 11.44Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.44
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 136.8 m
- To
- 158.1 m
- Intercept Depth
- 136.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TR26-05:136.8-158.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- gpt AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grade, indicating some mineralization. QA/QC is disclosed, but true width is not.
Positive factors
- QA/QC procedures are disclosed, enhancing data credibility.
Negative factors
- True width not disclosed.
Evidence · table
“11.44”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TR26-05Tombstone · goldGrade: 0.086Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.086
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 165.7 m
- To
- 174.8 m
- Intercept Depth
- 165.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-05:165.7-174.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.152
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.086 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.086 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.086”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-05Tombstone · silverGrade: 4.65Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.65
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 165.7 m
- To
- 174.8 m
- Intercept Depth
- 165.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-05:165.7-174.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.152
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 4.65 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 42.3 g/t·m is below.
Negative factors
- 4.65 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.65”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-05Tombstone · goldGrade: 0.119Grade Unit: g/tIntercept: 35 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.119
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 182.4 m
- To
- 217.4 m
- Intercept Depth
- 182.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-05:182.4-217.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.204
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.119 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.2 g/t·m is below.
Negative factors
- 0.119 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.119”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-05Tombstone · silverGrade: 5.95Grade Unit: g/tIntercept: 35 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.95
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 182.4 m
- To
- 217.4 m
- Intercept Depth
- 182.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-05:182.4-217.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.204
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 5.95 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 208.3 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.95”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-05Tombstone · goldGrade: 0.091Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.091
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 231 m
- To
- 255.3 m
- Intercept Depth
- 231 m
Classification
- Sample Type
- drill
- Group ID
- TR26-05:231-255.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.142
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.091 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.2 g/t·m is below.
Negative factors
- 0.091 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.091”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-05Tombstone · silverGrade: 3.6Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 231 m
- To
- 255.3 m
- Intercept Depth
- 231 m
Classification
- Sample Type
- drill
- Group ID
- TR26-05:231-255.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.142
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 3.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 87.5 g/t·m is below.
Negative factors
- 3.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.6”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · goldGrade: 0.124Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.124
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 31.9 m
- To
- 47.1 m
- Intercept Depth
- 31.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:31.9-47.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.124 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below.
Negative factors
- 0.124 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.124”
Context: TR26-06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · silverGrade: 4.06Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.06
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 31.9 m
- To
- 47.1 m
- Intercept Depth
- 31.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:31.9-47.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 4.06 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 61.7 g/t·m is below.
Negative factors
- 4.06 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.06”
Context: TR26-06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · goldGrade: 0.223Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 62.3 m
- To
- 69.9 m
- Intercept Depth
- 62.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:62.3-69.9
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.223 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.7 g/t·m is below.
Negative factors
- 0.223 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.223”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · silverGrade: 11.66Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.66
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 62.3 m
- To
- 69.9 m
- Intercept Depth
- 62.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:62.3-69.9
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 11.66 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 88.6 g/t·m is below.
Negative factors
- 11.66 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.66”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · goldGrade: 0.159Grade Unit: g/tIntercept: 31.9 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.159
- Grade Unit
- g/t
- Intercept
- 31.9 m
- From
- 88.2 m
- To
- 120.1 m
- Intercept Depth
- 88.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:88.2-120.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.214
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.159 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 5.1 g/t·m is below.
Negative factors
- 0.159 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.159”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · silverGrade: 3.86Grade Unit: g/tIntercept: 31.9 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.86
- Grade Unit
- g/t
- Intercept
- 31.9 m
- From
- 88.2 m
- To
- 120.1 m
- Intercept Depth
- 88.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:88.2-120.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.214
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 3.86 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 123.1 g/t·m is below.
Negative factors
- 3.86 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.86”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · goldGrade: 0.057Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.057
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 130.7 m
- To
- 158.1 m
- Intercept Depth
- 130.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:130.7-158.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.474
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.057 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 0.057 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.057”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · silverGrade: 29.22Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 29.22
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 130.7 m
- To
- 158.1 m
- Intercept Depth
- 130.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:130.7-158.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.474
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 29.22 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 800.6 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“29.22”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · goldGrade: 0.104Grade Unit: g/tIntercept: 59.3 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.104
- Grade Unit
- g/t
- Intercept
- 59.3 m
- From
- 202.2 m
- To
- 261.5 m
- Intercept Depth
- 202.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:202.2-261.5
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.104 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 6.2 g/t·m is below.
Negative factors
- 0.104 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.104”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-06Tombstone · silverGrade: 4.96Grade Unit: g/tIntercept: 59.3 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.96
- Grade Unit
- g/t
- Intercept
- 59.3 m
- From
- 202.2 m
- To
- 261.5 m
- Intercept Depth
- 202.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-06:202.2-261.5
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 4.96 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 294.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.96”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · goldGrade: 0.479Grade Unit: g/tIntercept: 112.4 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.479
- Grade Unit
- g/t
- Intercept
- 112.4 m
- From
- 50.2 m
- To
- 162.6 m
- Intercept Depth
- 50.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:50.2-162.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.659
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.479 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 53.8 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.479”
Context: TR26-07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · silverGrade: 12.64Grade Unit: g/tIntercept: 112.4 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.64
- Grade Unit
- g/t
- Intercept
- 112.4 m
- From
- 50.2 m
- To
- 162.6 m
- Intercept Depth
- 50.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:50.2-162.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.659
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 12.64 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1420.7 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.64”
Context: TR26-07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · goldGrade: 0.127Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.127
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 173.2 m
- To
- 185.4 m
- Intercept Depth
- 173.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:173.2-185.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.243
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.127 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 0.127 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.127”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · silverGrade: 8.11Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.11
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 173.2 m
- To
- 185.4 m
- Intercept Depth
- 173.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:173.2-185.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.243
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 8.11 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 98.9 g/t·m is below.
Negative factors
- 8.11 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.11”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · goldGrade: 0.049Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.049
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 221.9 m
- To
- 238.6 m
- Intercept Depth
- 221.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:221.9-238.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.156
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.049 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.049 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.049”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · silverGrade: 7.49Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.49
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 221.9 m
- To
- 238.6 m
- Intercept Depth
- 221.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:221.9-238.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.156
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 7.49 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 125.1 g/t·m is below.
Negative factors
- 7.49 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.49”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-08Tombstone · goldGrade: 0.576Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-08
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.576
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 121.6 m
- To
- 129.2 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-08:121.6-129.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.696
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.576 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.576”
Context: TR26-08
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-08Tombstone · silverGrade: 8.4Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-08
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.4
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 121.6 m
- To
- 129.2 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-08:121.6-129.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.696
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 8.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 63.8 g/t·m is below.
Negative factors
- 8.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.4”
Context: TR26-08
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · goldGrade: 0.069Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.069
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 35 m
- To
- 45.6 m
- Intercept Depth
- 35 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:35-45.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.199
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.069 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.069 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.069”
Context: TR26-09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · silverGrade: 9.06Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.06
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 35 m
- To
- 45.6 m
- Intercept Depth
- 35 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:35-45.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.199
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 9.06 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 96.0 g/t·m is below.
Negative factors
- 9.06 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.06”
Context: TR26-09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · goldGrade: 0.181Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.181
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 53.2 m
- To
- 59.3 m
- Intercept Depth
- 53.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:53.2-59.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.367
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.181 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.181 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.181”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · silverGrade: 13.1Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.1
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 53.2 m
- To
- 59.3 m
- Intercept Depth
- 53.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:53.2-59.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.367
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 13.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 79.9 g/t·m is below.
Negative factors
- 13.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.1”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · goldGrade: 0.041Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.041
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 158.1 m
- To
- 164.1 m
- Intercept Depth
- 158.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:158.1-164.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.147
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.041 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.041 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.041”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · silverGrade: 7.37Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.37
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 158.1 m
- To
- 164.1 m
- Intercept Depth
- 158.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:158.1-164.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.147
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 7.37 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 45.0 g/t·m is below.
Negative factors
- 7.37 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.37”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-10 PCTombstone · goldGrade: 0.162Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-10 PC
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.162
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 112.5 m
- To
- 118.6 m
- Intercept Depth
- 112.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-10 PC:112.5-118.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.293
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.162 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 0.162 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.162”
Context: TR26-10 PC
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-10 PCTombstone · silverGrade: 9.15Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-10 PC
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.15
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 112.5 m
- To
- 118.6 m
- Intercept Depth
- 112.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-10 PC:112.5-118.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.293
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 9.15 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 55.8 g/t·m is below.
Negative factors
- 9.15 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.15”
Context: TR26-10 PC
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-11Tombstone · goldGrade: 0.173Grade Unit: g/tIntercept: 100.3 mView all detailsHide details
Identity
- Hole ID
- TR26-11
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.173
- Grade Unit
- g/t
- Intercept
- 100.3 m
- From
- 100.3 m
- To
- 200.6 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-11:100.3-200.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.337
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.173 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 17.4 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.173”
Context: TR26-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-11Tombstone · silverGrade: 11.46Grade Unit: g/tIntercept: 100.3 mView all detailsHide details
Identity
- Hole ID
- TR26-11
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.46
- Grade Unit
- g/t
- Intercept
- 100.3 m
- From
- 100.3 m
- To
- 200.6 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-11:100.3-200.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.337
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 11.46 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1149.4 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.46”
Context: TR26-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-12Tombstone · goldGrade: 0.172Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-12
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.172
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 100.3 m
- To
- 149 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-12:100.3-149
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.172 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 8.4 g/t·m is below.
Negative factors
- 0.172 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.172”
Context: TR26-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-12Tombstone · silverGrade: 18.04Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-12
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 18.04
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 100.3 m
- To
- 149 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-12:100.3-149
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 18.04 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 876.7 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.04”
Context: TR26-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.056Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.056
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 18.2 m
- To
- 27.4 m
- Intercept Depth
- 18.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:18.2-27.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.174
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.056 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.056 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.056”
Context: TR26-13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 8.27Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.27
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 18.2 m
- To
- 27.4 m
- Intercept Depth
- 18.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:18.2-27.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.174
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 8.27 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 75.3 g/t·m is below.
Negative factors
- 8.27 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.27”
Context: TR26-13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.132Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.132
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 63.8 m
- To
- 68.8 m
- Intercept Depth
- 63.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:63.8-68.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.132 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.132 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.132”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 3.33Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.33
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 63.8 m
- To
- 68.8 m
- Intercept Depth
- 63.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:63.8-68.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 3.33 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 15.3 g/t·m is below.
Negative factors
- 3.33 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.33”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.039Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.039
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 85.1 m
- To
- 91.2 m
- Intercept Depth
- 85.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:85.1-91.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.039 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.039 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.039”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 5Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 85.1 m
- To
- 91.2 m
- Intercept Depth
- 85.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:85.1-91.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 30.5 g/t·m is below.
Negative factors
- 5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.00”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.062Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.062
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 194.5 m
- To
- 200.6 m
- Intercept Depth
- 194.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:194.5-200.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.123
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.062 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.062 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.062”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 4.275Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.275
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 194.5 m
- To
- 200.6 m
- Intercept Depth
- 194.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:194.5-200.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.123
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 4.275 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 26.1 g/t·m is below.
Negative factors
- 4.275 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.275”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.195Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.195
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 0 m
- To
- 10.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:0-10.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.381
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.195 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.1 g/t·m is below.
Negative factors
- 0.195 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.195”
Context: TR26-14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 13Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 0 m
- To
- 10.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:0-10.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.381
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 13 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 137.8 g/t·m is below.
Negative factors
- 13 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.00”
Context: TR26-14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.618Grade Unit: g/tIntercept: 107.9 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.618
- Grade Unit
- g/t
- Intercept
- 107.9 m
- From
- 39.5 m
- To
- 147.4 m
- Intercept Depth
- 39.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:39.5-147.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.972
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.618 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 66.7 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.618”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 24.8Grade Unit: g/tIntercept: 107.9 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 24.8
- Grade Unit
- g/t
- Intercept
- 107.9 m
- From
- 39.5 m
- To
- 147.4 m
- Intercept Depth
- 39.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:39.5-147.4
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.972
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 24.8 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 2675.9 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“24.80”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.091Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.091
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 176.3 m
- To
- 225 m
- Intercept Depth
- 176.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:176.3-225
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.206
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.091 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.4 g/t·m is below.
Negative factors
- 0.091 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.091”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 8.11Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.11
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 176.3 m
- To
- 225 m
- Intercept Depth
- 176.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:176.3-225
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.206
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 8.11 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 394.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.11”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.121Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.121
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 234.1 m
- To
- 243.2 m
- Intercept Depth
- 234.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:234.1-243.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.267
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.121 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.121 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.121”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 10.67Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.67
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 234.1 m
- To
- 243.2 m
- Intercept Depth
- 234.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:234.1-243.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.267
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 10.67 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 97.1 g/t·m is below.
Negative factors
- 10.67 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.67”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · goldGrade: 0.214Grade Unit: g/tIntercept: 47.1 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.214
- Grade Unit
- g/t
- Intercept
- 47.1 m
- From
- 92.7 m
- To
- 139.8 m
- Intercept Depth
- 92.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:92.7-139.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.456
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.214 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 10.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.214”
Context: TR26-15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · silverGrade: 13.26Grade Unit: g/tIntercept: 47.1 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.26
- Grade Unit
- g/t
- Intercept
- 47.1 m
- From
- 92.7 m
- To
- 139.8 m
- Intercept Depth
- 92.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:92.7-139.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.456
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 13.26 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 624.5 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.26”
Context: TR26-15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · goldGrade: 0.096Grade Unit: g/tIntercept: 42.6 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.096
- Grade Unit
- g/t
- Intercept
- 42.6 m
- From
- 156.6 m
- To
- 200.6 m
- Intercept Depth
- 156.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:156.6-200.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.157
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.096 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.1 g/t·m is below.
Negative factors
- 0.096 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.096”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · silverGrade: 3.42Grade Unit: g/tIntercept: 42.6 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.42
- Grade Unit
- g/t
- Intercept
- 42.6 m
- From
- 156.6 m
- To
- 200.6 m
- Intercept Depth
- 156.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:156.6-200.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.157
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 3.42 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 145.7 g/t·m is below.
Negative factors
- 3.42 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.42”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · goldGrade: 0.223Grade Unit: g/tIntercept: 89.8 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 89.8 m
- From
- 57.9 m
- To
- 147.8 m
- Intercept Depth
- 57.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:57.9-147.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.423
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.223 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 20.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.223”
Context: TR26-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · silverGrade: 10.96Grade Unit: g/tIntercept: 89.8 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.96
- Grade Unit
- g/t
- Intercept
- 89.8 m
- From
- 57.9 m
- To
- 147.8 m
- Intercept Depth
- 57.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:57.9-147.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.423
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 10.96 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 984.2 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.96”
Context: TR26-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · goldGrade: 0.069Grade Unit: g/tIntercept: 15.24 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.069
- Grade Unit
- g/t
- Intercept
- 15.24 m
- From
- 164.6 m
- To
- 179.8 m
- Intercept Depth
- 164.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:164.6-179.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.157
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.069 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.069 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.069”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · silverGrade: 5.68Grade Unit: g/tIntercept: 15.24 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.68
- Grade Unit
- g/t
- Intercept
- 15.24 m
- From
- 164.6 m
- To
- 179.8 m
- Intercept Depth
- 164.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:164.6-179.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.157
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 5.68 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 86.6 g/t·m is below.
Negative factors
- 5.68 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.68”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · goldGrade: 0.077Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.077
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 195 m
- To
- 198.1 m
- Intercept Depth
- 195 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:195-198.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.181
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.077 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.077 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.077”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · silverGrade: 5.7Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.7
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 195 m
- To
- 198.1 m
- Intercept Depth
- 195 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:195-198.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.181
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 5.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 17.7 g/t·m is below.
Negative factors
- 5.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.7”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · goldGrade: 0.613Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.613
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 62.5 m
- To
- 67.1 m
- Intercept Depth
- 62.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:62.5-67.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.651
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.613 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.613”
Context: TR26-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · silverGrade: 2.13Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.13
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 62.5 m
- To
- 67.1 m
- Intercept Depth
- 62.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:62.5-67.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.651
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 2.13 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.8 g/t·m is below.
Negative factors
- 2.13 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.13”
Context: TR26-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · goldGrade: 0.294Grade Unit: g/tIntercept: 121.9 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.294
- Grade Unit
- g/t
- Intercept
- 121.9 m
- From
- 82.3 m
- To
- 204.2 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:82.3-204.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.499
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.294 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 35.8 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.294”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · silverGrade: 11.3Grade Unit: g/tIntercept: 121.9 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.3
- Grade Unit
- g/t
- Intercept
- 121.9 m
- From
- 82.3 m
- To
- 204.2 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:82.3-204.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.499
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 11.3 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1377.5 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.3”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · goldGrade: 1.017Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.017
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 85.3 m
- To
- 97.5 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:85.3-97.5
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.281
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 1.017 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 12.4 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.017”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · silverGrade: 14.54Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 14.54
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 85.3 m
- To
- 97.5 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:85.3-97.5
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.281
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 14.54 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 177.4 g/t·m is below.
Negative factors
- 14.54 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.54”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 0.775Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.775
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 0 m
- To
- 53.2 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:0-53.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.356
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.775 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 41.2 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.775”
Context: TR26-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 31.94Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 31.94
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 0 m
- To
- 53.2 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:0-53.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.356
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 31.94 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1699.2 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“31.94”
Context: TR26-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 1.909Grade Unit: g/tIntercept: 18.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.909
- Grade Unit
- g/t
- Intercept
- 18.2 m
- From
- 25.8 m
- To
- 44.1 m
- Intercept Depth
- 25.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:25.8-44.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.346
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 1.909 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 34.7 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.909”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 79.07Grade Unit: g/tIntercept: 18.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 79.07
- Grade Unit
- g/t
- Intercept
- 18.2 m
- From
- 25.8 m
- To
- 44.1 m
- Intercept Depth
- 25.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:25.8-44.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.346
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 79.07 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1439.1 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“79.07”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 0.132Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.132
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 79 m
- To
- 100.3 m
- Intercept Depth
- 79 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:79-100.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.212
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.132 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below.
Negative factors
- 0.132 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.132”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 4.41Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.41
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 79 m
- To
- 100.3 m
- Intercept Depth
- 79 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:79-100.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.212
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 4.41 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 93.9 g/t·m is below.
Negative factors
- 4.41 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.41”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 0.084Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.084
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 111 m
- To
- 164.2 m
- Intercept Depth
- 111 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:111-164.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.198
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.084 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.5 g/t·m is below.
Negative factors
- 0.084 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.084”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 6.246Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.246
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 111 m
- To
- 164.2 m
- Intercept Depth
- 111 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:111-164.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.198
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 6.246 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 332.3 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.246”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 1.05Grade Unit: g/tIntercept: 66.9 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 66.9 m
- From
- 13.7 m
- To
- 80.6 m
- Intercept Depth
- 13.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:13.7-80.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.472
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 1.05 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 70.2 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.050”
Context: TR26-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 23.21Grade Unit: g/tIntercept: 66.9 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 23.21
- Grade Unit
- g/t
- Intercept
- 66.9 m
- From
- 13.7 m
- To
- 80.6 m
- Intercept Depth
- 13.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:13.7-80.6
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.472
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 23.21 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1552.7 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23.21”
Context: TR26-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 2.309Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.309
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 30.4 m
- To
- 57.8 m
- Intercept Depth
- 30.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:30.4-57.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.095
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 2.309 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 63.3 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 2.309 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.309”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 43.23Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 43.23
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 30.4 m
- To
- 57.8 m
- Intercept Depth
- 30.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:30.4-57.8
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.095
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 43.23 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1184.5 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“43.23”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.162Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.162
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 88.2 m
- To
- 107.9 m
- Intercept Depth
- 88.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:88.2-107.9
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.283
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.162 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.2 g/t·m is below.
Negative factors
- 0.162 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.162”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 6.68Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.68
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 88.2 m
- To
- 107.9 m
- Intercept Depth
- 88.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:88.2-107.9
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.283
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 6.68 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 132.3 g/t·m is below.
Negative factors
- 6.68 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.68”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.395Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.395
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 114 m
- To
- 135.3 m
- Intercept Depth
- 114 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:114-135.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.62
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.395 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 8.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.395”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 12.37Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.37
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 114 m
- To
- 135.3 m
- Intercept Depth
- 114 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:114-135.3
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.62
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 12.37 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 263.5 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.37”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.092Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.092
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 142.9 m
- To
- 167.2 m
- Intercept Depth
- 142.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:142.9-167.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.221
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.092 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.2 g/t·m is below.
Negative factors
- 0.092 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.092”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 7.14Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.14
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 142.9 m
- To
- 167.2 m
- Intercept Depth
- 142.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:142.9-167.2
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.221
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 7.14 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 173.5 g/t·m is below.
Negative factors
- 7.14 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.14”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.105Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.105
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 174.8 m
- To
- 199.1 m
- Intercept Depth
- 174.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:174.8-199.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.286
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 0.105 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.6 g/t·m is below.
Negative factors
- 0.105 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.105”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 10Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 174.8 m
- To
- 199.1 m
- Intercept Depth
- 174.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:174.8-199.1
- Mining Method
- open_pit
Location
- Location
- Independence Mine
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.286
- Metal Eq. Unit
- g/t Au-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-15T00:00:00.000Z
Reasoning: Expanded from assay table. 10 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 243.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.0”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.