Aztec Drills 83.8 meters of 1.31 g/t AuEq (0.90 g/t Au and 22.61 g/t Ag), Including 7.6 meters of 8.34 g/t AuEq (6.97 g/t Au & 75.42 g/t Ag); Extends the Strike Length by 255 Meters to over 1,250 Meters of Oxide Gold-Silver Mineralization at the Tombstone Project, Arizona
Original announcement by tmx on
- Company
- Aztec Minerals Corp.
- Ticker
- AZT
- Exchange
- TSX
- Region
- Arizona
- Primary commodity
- Gold
- Secondary commodities
- Silver, Lead, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-19 10:23:44 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Aztec Minerals reports significant drill results from its Tombstone Project in Arizona, extending the oxide gold-silver mineralization strike length by 255 meters to over 1,250 meters. All five new step-out holes intersected mineralization, including high-grade intercepts such as 83.8 meters of 1.31 g/t AuEq (0.90 g/t Au and 22.61 g/t Ag) in hole TR26-41. These results are expected to be included in an upcoming maiden mineral resource estimate for the project.
Reasoning: The document reports highly positive drill results that significantly extend the known strike length of oxide gold-silver mineralization at the Tombstone Project. The intercepts include high-grade zones, and all new step-out holes were mineralized, indicating strong continuity and expansion potential. The results are expected to feed into a maiden resource estimate, adding significant value. However, the lack of true width disclosure introduces some uncertainty regarding the actual thickness of the mineralization.
Positive factors
- Significant strike length extension of oxide gold-silver mineralization (255m to over 1,250m)
- High-grade intercepts at both ends of the extended zone, indicating continuity
- All five reported first-pass step-out holes intersected mineralization, with no barren holes
- Maiden resource estimate expected in Q4, incorporating these results
- Good QA/QC disclosure with certified labs and standard procedures
Negative factors
- Reported intervals are apparent widths only, true widths are not disclosed and can range from 30% to 100% of apparent widths
- Historic workings/voids within mineralized intervals are reported as 'no sample', which can affect grade representativeness
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 354
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling extends the Contention mineralized system by 255 meters to the north-northeast, expanding the known mineralization.
Evidence · text
“extends the Contention mineralized system 255 meters to the north-northeast in the North Extension target”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The release explicitly states that all reported intersection lengths are apparent widths of mineralization, not true widths.
Evidence · text
“All reported intersection lengths are apparent widths of mineralization, not true widths, which can range at the property from 30% to 100% of apparent widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The company details its QA/QC program, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company uses quality assurance-quality control as a standard part of its sampling-assaying-assessments in conjunction with its exploration sampling programs. Samples and their collection are controlled by an industry standard conforming QAQC program including all drill holes containing certified blanks, standards, and duplicates.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Composited intervals are reported at a 0.10 g/t AuEq cutoff with a maximum of three consecutive below-cutoff samples of internal dilution and a minimum of two samples.
Evidence · text
“Composited intervals are reported at a 0.10 g/t AuEq cutoff with a maximum of three consecutive below-cutoff samples of internal dilution and a minimum of two samples”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The scientific and technical information has been reviewed and approved by Allen David Heyl, VP Exploration of Aztec, a Qualified Person under NI43-101.
Evidence · text
“The scientific and technical information contained in this news release has been reviewed and approved by Allen David Heyl, B.Sc., CPG - AIPG No.11277, VP Exploration of Aztec, a Qualified Person under NI43-101.”
Extracted facts
Stored fact records: 354. Some facts used in scoring do not have a stored record.
Drill Results (354)
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.11Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 0 m
- To
- 7.6 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:0-7.6
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.19
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept, while low grade, contributes to the overall extension of the mineralized zone from surface. Its novelty is high as it's part of a new step-out program.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Part of a program extending known mineralization
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.11”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 4.54Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.54
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 0 m
- To
- 7.6 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:0-7.6
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.19
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept, while low grade, contributes to the overall extension of the mineralized zone from surface. Its novelty is high as it's part of a new step-out program.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Part of a program extending known mineralization
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“4.54”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.09Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 15.2 m
- To
- 19.8 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 15.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:15.2-19.8
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.09”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 1.83Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.83
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 15.2 m
- To
- 19.8 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 15.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:15.2-19.8
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“1.83”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.18Grade Unit: g/tIntercept: 59.4 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 59.4 m
- From
- 33.5 m
- To
- 93 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 33.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:33.5-93
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept demonstrates continuity of mineralization between other holes, which is a positive for resource modeling, despite the low grade.
Positive factors
- Significant intercept length
- Demonstrates continuity of mineralization
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.18”
Context: 59.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 12.38Grade Unit: g/tIntercept: 59.4 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.38
- Grade Unit
- g/t
- Intercept
- 59.4 m
- From
- 33.5 m
- To
- 93 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 33.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:33.5-93
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept demonstrates continuity of mineralization between other holes, which is a positive for resource modeling, despite the low grade.
Positive factors
- Significant intercept length
- Demonstrates continuity of mineralization
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“12.38”
Context: 59.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.72Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.72
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 54.9 m
- To
- 59.4 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:54.9-59.4
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.06
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade within a broader mineralized zone, contributing positively to the overall prospectivity.
Positive factors
- Moderate gold grade within a longer interval
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.72”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 18.73Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 18.73
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 54.9 m
- To
- 59.4 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:54.9-59.4
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.06
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade within a broader mineralized zone, contributing positively to the overall prospectivity.
Positive factors
- Moderate silver grade within a longer interval
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“18.73”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.14Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 61 m
- To
- 65.5 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 61 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:61-65.5
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.14”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 26.23Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 26.23
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 61 m
- To
- 65.5 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 61 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:61-65.5
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“26.23”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.37Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 67.1 m
- To
- 70.1 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 67.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:67.1-70.1
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade within the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.37”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 34.35Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 34.35
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 67.1 m
- To
- 70.1 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 67.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:67.1-70.1
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade within the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“34.35”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.16Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 83.8 m
- To
- 86.9 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 83.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:83.8-86.9
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.16”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-40Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 24.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-40
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 24.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 83.8 m
- To
- 86.9 m
- Hole Depth
- 121.9 m
- Intercept Depth
- 83.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-40:83.8-86.9
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508227
- Azimuth
- 103 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“24.50”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 0.26Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 0 m
- To
- 4.6 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:0-4.6
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept from surface contributes to the overall mineralized footprint, supporting the shallow oxide potential.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.26”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 12.13Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.13
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 0 m
- To
- 4.6 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:0-4.6
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept from surface contributes to the overall mineralized footprint, supporting the shallow oxide potential.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“12.13”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 0.36Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 0 m
- To
- 3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:0-3
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.65
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This moderate-grade intercept from surface is a positive indicator for shallow oxide mineralization.
Positive factors
- Moderate gold grade from surface
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.36”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 15.85Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 15.85
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 0 m
- To
- 3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:0-3
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.65
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This moderate-grade intercept from surface is a positive indicator for shallow oxide mineralization.
Positive factors
- Moderate silver grade from surface
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“15.85”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 0.9Grade Unit: g/tIntercept: 83.8 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 83.8 m
- From
- 24.4 m
- To
- 108.2 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 24.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:24.4-108.2
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length and strong gold grade, significantly contributing to the project's overall potential and extending the known mineralization.
Positive factors
- Exceptional intercept length with strong gold grade
- Significant contribution to strike length extension
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“0.90”
Context: 83.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 22.61Grade Unit: g/tIntercept: 83.8 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 22.61
- Grade Unit
- g/t
- Intercept
- 83.8 m
- From
- 24.4 m
- To
- 108.2 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 24.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:24.4-108.2
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length and strong silver grade, significantly contributing to the project's overall potential and extending the known mineralization.
Positive factors
- Exceptional intercept length with strong silver grade
- Significant contribution to strike length extension
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“22.61”
Context: 83.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 6.97Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.97
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 42.7 m
- To
- 50.3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 42.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:42.7-50.3
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept, representing a highly significant and material result within the broader mineralized zone, indicating high-grade potential.
Positive factors
- Bonanza gold grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“6.97”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 75.42Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 75.42
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 42.7 m
- To
- 50.3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 42.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:42.7-50.3
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a bonanza-grade gold equivalent intercept, with strong silver, representing a highly significant and material result within the broader mineralized zone, indicating high-grade potential.
Positive factors
- Strong silver grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“75.42”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 0.73Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 54.9 m
- To
- 64 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:54.9-64
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.67
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong AuEq grade over a good width, contributing significantly to the overall high-grade potential of the hole.
Positive factors
- Strong AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.73”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 51.72Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 51.72
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 54.9 m
- To
- 64 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:54.9-64
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.67
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong AuEq grade over a good width, contributing significantly to the overall high-grade potential of the hole.
Positive factors
- Strong AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“51.72”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 2.87Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.87
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 71.6 m
- To
- 74.7 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 71.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:71.6-74.7
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade and high AuEq, indicating a high-grade zone within the broader mineralization.
Positive factors
- Strong gold grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.87”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 53.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 53.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 71.6 m
- To
- 74.7 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 71.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:71.6-74.7
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade and high AuEq, indicating a high-grade zone within the broader mineralization.
Positive factors
- Strong silver grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“53.20”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 82.3 m
- To
- 85.3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 82.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:82.3-85.3
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.58
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade, contributing to the overall high-grade potential of the hole.
Positive factors
- Moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.16”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-41Tombstone · silverGrade: 78.15Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-41
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 78.15
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 82.3 m
- To
- 85.3 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 82.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-41:82.3-85.3
- Mining Method
- open_pit
Location
- Easting
- 588923
- Northing
- 3508255
- Azimuth
- 102 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.58
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade, contributing to the overall high-grade potential of the hole.
Positive factors
- Strong silver grade
- Moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“78.15”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 13.7 m
- To
- 16.8 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 13.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:13.7-16.8
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.09”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · silverGrade: 2.05Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.05
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 13.7 m
- To
- 16.8 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 13.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:13.7-16.8
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“2.05”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 39.6 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 39.6 m
- From
- 33.5 m
- To
- 73.2 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 33.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:33.5-73.2
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept helps define the eastern extent of the mineralization, which is a positive for resource modeling, despite the low grade.
Positive factors
- Significant intercept length
- Helps extend the eastern margin of mineralization
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.16”
Context: 39.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · silverGrade: 9.66Grade Unit: g/tIntercept: 39.6 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.66
- Grade Unit
- g/t
- Intercept
- 39.6 m
- From
- 33.5 m
- To
- 73.2 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 33.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:33.5-73.2
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept helps define the eastern extent of the mineralization, which is a positive for resource modeling, despite the low grade.
Positive factors
- Significant intercept length
- Helps extend the eastern margin of mineralization
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“9.66”
Context: 39.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · goldGrade: 1.29Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.29
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 35.1 m
- To
- 38.1 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 35.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:35.1-38.1
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.08
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade and high AuEq, indicating a high-grade zone within the broader mineralization, helping to define the eastern margin.
Positive factors
- Strong gold grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“1.29”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · silverGrade: 43.65Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 43.65
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 35.1 m
- To
- 38.1 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 35.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:35.1-38.1
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.08
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade and high AuEq, indicating a high-grade zone within the broader mineralization, helping to define the eastern margin.
Positive factors
- Strong silver grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“43.65”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 120.4 m
- To
- 129.5 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 120.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:120.4-129.5
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.09”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-42Tombstone · silverGrade: 2.03Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-42
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.03
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 120.4 m
- To
- 129.5 m
- Hole Depth
- 152.4 m
- Intercept Depth
- 120.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-42:120.4-129.5
- Mining Method
- open_pit
Location
- Easting
- 588996
- Northing
- 3508281
- Azimuth
- 102 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“2.03”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · goldGrade: 0.15Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 0 m
- To
- 18.3 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:0-18.3
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept from surface contributes to the overall mineralized footprint, supporting the shallow oxide potential.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.15”
Context: 18.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · silverGrade: 3.82Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.82
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 0 m
- To
- 18.3 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:0-18.3
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept from surface contributes to the overall mineralized footprint, supporting the shallow oxide potential.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“3.82”
Context: 18.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · goldGrade: 0.7Grade Unit: g/tIntercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 51.8 m
- From
- 85.3 m
- To
- 137.2 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 85.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:85.3-137.2
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.16
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly material intercept due to its length and strong AuEq grade, significantly extending the mineralization to the north and indicating strong potential for resource growth.
Positive factors
- Significant intercept length with strong AuEq grade
- Extends mineralization 90m further north
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“0.70”
Context: 51.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · silverGrade: 25.59Grade Unit: g/tIntercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 25.59
- Grade Unit
- g/t
- Intercept
- 51.8 m
- From
- 85.3 m
- To
- 137.2 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 85.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:85.3-137.2
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.16
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly material intercept due to its length and strong AuEq grade, significantly extending the mineralization to the north and indicating strong potential for resource growth.
Positive factors
- Significant intercept length with strong AuEq grade
- Extends mineralization 90m further north
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“25.59”
Context: 51.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · goldGrade: 1.93Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.93
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 109.7 m
- To
- 129.5 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 109.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:109.7-129.5
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.99
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong gold intercept with high AuEq, indicating a significant high-grade zone within the northern extension of the mineralization.
Positive factors
- Strong gold grade over a good width
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“1.93”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · silverGrade: 58.01Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 58.01
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 109.7 m
- To
- 129.5 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 109.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:109.7-129.5
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.99
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong silver intercept with high AuEq, indicating a significant high-grade zone within the northern extension of the mineralization.
Positive factors
- Strong silver grade over a good width
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“58.01”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 158.5 m
- To
- 161.5 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 158.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:158.5-161.5
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.04”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · silverGrade: 5.8Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.8
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 158.5 m
- To
- 161.5 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 158.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:158.5-161.5
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“5.80”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · goldGrade: 0.35Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 193.5 m
- To
- 202.7 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 193.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:193.5-202.7
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade, contributing to the overall mineralized footprint at depth.
Positive factors
- Moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.35”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-43Tombstone · silverGrade: 5.3Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-43
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.3
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 193.5 m
- To
- 202.7 m
- Hole Depth
- 207.3 m
- Intercept Depth
- 193.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-43:193.5-202.7
- Mining Method
- open_pit
Location
- Easting
- 589012
- Northing
- 3508344
- Azimuth
- 106 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade, contributing to the overall mineralized footprint at depth.
Positive factors
- Moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.30”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.79Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 10.7 m
- To
- 33.5 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 10.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:10.7-33.5
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.94
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong AuEq grade over a good width, contributing significantly to the southern extension of the mineralization.
Positive factors
- Strong AuEq grade over a good width
- Extends mineralization at the southern end
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“0.79”
Context: 22.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 8.25Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.25
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 10.7 m
- To
- 33.5 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 10.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:10.7-33.5
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.94
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong AuEq grade over a good width, contributing significantly to the southern extension of the mineralization.
Positive factors
- Strong AuEq grade over a good width
- Extends mineralization at the southern end
- Good QA/QC disclosure
Negative factors
- Apparent width only
- Historic workings within interval reported as no sample
Evidence · table
“8.25”
Context: 22.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 3.91Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.91
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 18.3 m
- To
- 21.3 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 18.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:18.3-21.3
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade and high AuEq, indicating a high-grade zone within the broader mineralization at the southern end.
Positive factors
- Strong gold grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“3.91”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 12.65Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.65
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 18.3 m
- To
- 21.3 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 18.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:18.3-21.3
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a high AuEq grade, indicating a high-grade zone within the broader mineralization at the southern end.
Positive factors
- Strong AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“12.65”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.07Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 39.6 m
- To
- 45.7 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 39.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:39.6-45.7
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.07”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 5.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 39.6 m
- To
- 45.7 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 39.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:39.6-45.7
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“5.03”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.37Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 54.9 m
- To
- 67.1 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:54.9-67.1
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade over a good width, contributing to the overall mineralization at the southern end.
Positive factors
- Moderate AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.37”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 7.93Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.93
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 54.9 m
- To
- 67.1 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:54.9-67.1
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade over a good width, contributing to the overall mineralization at the southern end.
Positive factors
- Moderate AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“7.93”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 1.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 54.9 m
- To
- 57.9 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:54.9-57.9
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.26
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade, contributing to the overall high-grade potential of the hole at the southern end.
Positive factors
- Strong gold grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“1.20”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 3.05Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.05
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 54.9 m
- To
- 57.9 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:54.9-57.9
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.26
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a high AuEq grade, contributing to the overall high-grade potential of the hole at the southern end.
Positive factors
- Strong AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“3.05”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.55Grade Unit: g/tIntercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 51.8 m
- From
- 77.7 m
- To
- 129.5 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 77.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:77.7-129.5
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.65
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept with moderate AuEq grade contributes significantly to the overall mineralization at the southern end of the project.
Positive factors
- Significant intercept length with moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.55”
Context: 51.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 5.61Grade Unit: g/tIntercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.61
- Grade Unit
- g/t
- Intercept
- 51.8 m
- From
- 77.7 m
- To
- 129.5 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 77.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:77.7-129.5
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.65
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept with moderate AuEq grade contributes significantly to the overall mineralization at the southern end of the project.
Positive factors
- Significant intercept length with moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.61”
Context: 51.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 3.6Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 86.9 m
- To
- 93 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 86.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:86.9-93
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.71
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade and high AuEq, indicating a high-grade zone within the broader mineralization at the southern end.
Positive factors
- Strong gold grade
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“3.60”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 5.98Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.98
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 86.9 m
- To
- 93 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 86.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:86.9-93
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.71
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a high AuEq grade, indicating a high-grade zone within the broader mineralization at the southern end.
Positive factors
- High AuEq grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.98”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · goldGrade: 0.13Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 137.2 m
- To
- 157 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 137.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:137.2-157
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity at depth.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.13”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-44Four of the holes are first pass step-outs along the Contention mineralized · silverGrade: 3.72Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-44
- Project
- Four of the holes are first pass step-outs along the Contention mineralized
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.72
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 137.2 m
- To
- 157 m
- Hole Depth
- 176.8 m
- Intercept Depth
- 137.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-44:137.2-157
- Mining Method
- open_pit
Location
- Easting
- 588899
- Northing
- 3508115
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity at depth.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“3.72”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-01Tombstone · goldGrade: 0.038Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.038
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.7 m
- To
- 72.9 m
- Intercept Depth
- 51.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-01:51.7-72.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.208
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.038”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-01Tombstone · silverGrade: 11.76Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.76
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.7 m
- To
- 72.9 m
- Intercept Depth
- 51.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-01:51.7-72.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.208
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“11.76”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-01Tombstone · goldGrade: 0.039Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.039
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 86.6 m
- To
- 110.9 m
- Intercept Depth
- 86.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-01:86.6-110.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.039”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-01Tombstone · silverGrade: 13.37Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-01
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.37
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 86.6 m
- To
- 110.9 m
- Intercept Depth
- 86.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-01:86.6-110.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“13.37”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · goldGrade: 0.136Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.136
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 0 m
- To
- 19.8 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:0-19.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.316
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept from surface contributes to the overall mineralized footprint, supporting the shallow oxide potential.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.136”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · silverGrade: 12.62Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.62
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 0 m
- To
- 19.8 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:0-19.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.316
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept from surface contributes to the overall mineralized footprint, supporting the shallow oxide potential.
Positive factors
- Intercepted oxide gold-silver mineralization from surface
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“12.62”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · goldGrade: 0.088Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.088
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 54.7 m
- To
- 60.8 m
- Intercept Depth
- 54.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:54.7-60.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.284
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.088”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · silverGrade: 13.67Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.67
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 54.7 m
- To
- 60.8 m
- Intercept Depth
- 54.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:54.7-60.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.284
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“13.67”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · goldGrade: 0.094Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.094
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 91.2 m
- To
- 100.3 m
- Intercept Depth
- 91.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:91.2-100.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.094”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · silverGrade: 5.65Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.65
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 91.2 m
- To
- 100.3 m
- Intercept Depth
- 91.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:91.2-100.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“5.65”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · goldGrade: 0.076Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.076
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 130.7 m
- To
- 147.4 m
- Intercept Depth
- 130.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:130.7-147.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.115
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.076”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-02Tombstone · silverGrade: 2.76Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.76
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 130.7 m
- To
- 147.4 m
- Intercept Depth
- 130.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-02:130.7-147.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.115
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“2.76”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-03Tombstone · goldGrade: 0.069Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.069
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-03:147.4-161.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.122
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.069”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-03Tombstone · silverGrade: 3.73Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.73
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-03:147.4-161.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.122
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“3.73”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-03Tombstone · goldGrade: 0.103Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.103
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 167.2 m
- To
- 177.8 m
- Intercept Depth
- 167.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-03:167.2-177.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.206
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.103”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-03Tombstone · silverGrade: 7.21Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.21
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 167.2 m
- To
- 177.8 m
- Intercept Depth
- 167.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-03:167.2-177.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.206
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“7.21”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-03Tombstone · goldGrade: 0.149Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.149
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 193 m
- To
- 205.2 m
- Intercept Depth
- 193 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-03:193-205.2
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.273
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.149”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-03Tombstone · silverGrade: 8.7Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.7
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 193 m
- To
- 205.2 m
- Intercept Depth
- 193 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-03:193-205.2
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.273
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“8.7”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-04Tombstone · goldGrade: 0.057Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.057
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 53.2 m
- To
- 63.8 m
- Intercept Depth
- 53.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-04:53.2-63.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.173
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.057”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-04Tombstone · silverGrade: 8.17Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.17
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 53.2 m
- To
- 63.8 m
- Intercept Depth
- 53.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-04:53.2-63.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.173
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“8.17”
Context: 10.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-04Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-04:147.4-161.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.040”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-04Tombstone · silverGrade: 4.16Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.16
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 147.4 m
- To
- 161.1 m
- Intercept Depth
- 147.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-04:147.4-161.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“4.16”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-04Tombstone · goldGrade: 0.22Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 168.7 m
- To
- 188.5 m
- Intercept Depth
- 168.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-04:168.7-188.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.416
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade over a good width, contributing to the overall mineralization at depth.
Positive factors
- Moderate AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.220”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-04Tombstone · silverGrade: 13.75Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.75
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 168.7 m
- To
- 188.5 m
- Intercept Depth
- 168.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-04:168.7-188.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.416
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade over a good width, contributing to the overall mineralization at depth.
Positive factors
- Moderate AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“13.75”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.223Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 16.7 m
- To
- 36.5 m
- Intercept Depth
- 16.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:16.7-36.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.358
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.223”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 8.78Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.78
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 16.7 m
- To
- 36.5 m
- Intercept Depth
- 16.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:16.7-36.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.358
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate AuEq grade over a good width
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“8.78”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.117Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.117
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 60.8 m
- To
- 73 m
- Intercept Depth
- 60.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:60.8-73
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.172
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.117”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 3.85Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.85
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 60.8 m
- To
- 73 m
- Intercept Depth
- 60.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:60.8-73
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.172
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“3.85”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.112Grade Unit: g/tIntercept: 50.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.112
- Grade Unit
- g/t
- Intercept
- 50.2 m
- From
- 80.6 m
- To
- 130.7 m
- Intercept Depth
- 80.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:80.6-130.7
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.112”
Context: 50.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 4.9Grade Unit: g/tIntercept: 50.2 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.9
- Grade Unit
- g/t
- Intercept
- 50.2 m
- From
- 80.6 m
- To
- 130.7 m
- Intercept Depth
- 80.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:80.6-130.7
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“4.90”
Context: 50.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.117Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.117
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 136.8 m
- To
- 158.1 m
- Intercept Depth
- 136.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:136.8-158.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.117”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 11.44Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.44
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 136.8 m
- To
- 158.1 m
- Intercept Depth
- 136.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:136.8-158.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“11.44”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.086Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.086
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 165.7 m
- To
- 174.8 m
- Intercept Depth
- 165.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:165.7-174.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.152
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“0.086”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 4.65Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.65
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 165.7 m
- To
- 174.8 m
- Intercept Depth
- 165.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:165.7-174.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.152
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a low-grade intercept that adds to the overall mineralized footprint but is not individually material.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Very low grade
- Apparent width only
Evidence · table
“4.65”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.119Grade Unit: g/tIntercept: 35 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.119
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 182.4 m
- To
- 217.4 m
- Intercept Depth
- 182.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:182.4-217.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.204
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.119”
Context: 35.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 5.95Grade Unit: g/tIntercept: 35 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.95
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 182.4 m
- To
- 217.4 m
- Intercept Depth
- 182.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:182.4-217.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.204
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“5.95”
Context: 35.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · goldGrade: 0.091Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.091
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 231 m
- To
- 255.3 m
- Intercept Depth
- 231 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:231-255.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.142
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.091”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-05Tombstone · silverGrade: 3.6Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-05
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 231 m
- To
- 255.3 m
- Intercept Depth
- 231 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-05:231-255.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.142
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“3.6”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · goldGrade: 0.124Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.124
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 31.9 m
- To
- 47.1 m
- Intercept Depth
- 31.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:31.9-47.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.124”
Context: 15.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · silverGrade: 4.06Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.06
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 31.9 m
- To
- 47.1 m
- Intercept Depth
- 31.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:31.9-47.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.182
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This low-grade intercept is part of the broader mineralized zone, supporting continuity.
Positive factors
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“4.06”
Context: 15.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · goldGrade: 0.223Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 62.3 m
- To
- 69.9 m
- Intercept Depth
- 62.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:62.3-69.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade, contributing to the overall mineralization.
Positive factors
- Moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.223”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · silverGrade: 11.66Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.66
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 62.3 m
- To
- 69.9 m
- Intercept Depth
- 62.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:62.3-69.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This intercept shows a moderate AuEq grade, contributing to the overall mineralization.
Positive factors
- Moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“11.66”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · goldGrade: 0.159Grade Unit: g/tIntercept: 31.9 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.159
- Grade Unit
- g/t
- Intercept
- 31.9 m
- From
- 88.2 m
- To
- 120.1 m
- Intercept Depth
- 88.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:88.2-120.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.214
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.159”
Context: 31.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · silverGrade: 3.86Grade Unit: g/tIntercept: 31.9 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.86
- Grade Unit
- g/t
- Intercept
- 31.9 m
- From
- 88.2 m
- To
- 120.1 m
- Intercept Depth
- 88.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:88.2-120.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.214
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“3.86”
Context: 31.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · goldGrade: 0.057Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.057
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 130.7 m
- To
- 158.1 m
- Intercept Depth
- 130.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:130.7-158.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.474
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept with moderate AuEq grade contributes to the overall mineralization, despite the low gold grade.
Positive factors
- Significant intercept length with moderate AuEq grade
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.057”
Context: 27.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · silverGrade: 29.22Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 29.22
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 130.7 m
- To
- 158.1 m
- Intercept Depth
- 130.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:130.7-158.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.474
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long intercept with moderate AuEq grade and good silver grade contributes to the overall mineralization.
Positive factors
- Significant intercept length with moderate AuEq grade
- Good silver grade
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“29.22”
Context: 27.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · goldGrade: 0.104Grade Unit: g/tIntercept: 59.3 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.104
- Grade Unit
- g/t
- Intercept
- 59.3 m
- From
- 202.2 m
- To
- 261.5 m
- Intercept Depth
- 202.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:202.2-261.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This long, low-grade intercept contributes to the overall mineralized footprint, supporting continuity.
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
- Apparent width only
Evidence · table
“0.104”
Context: 59.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-06Tombstone · silverGrade: 4.96Grade Unit: g/tIntercept: 59.3 mView all detailsHide details
Identity
- Hole ID
- TR26-06
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.96
- Grade Unit
- g/t
- Intercept
- 59.3 m
- From
- 202.2 m
- To
- 261.5 m
- Intercept Depth
- 202.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TR26-06:202.2-261.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- inferred
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.175
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t AuEq
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Positive factors
- Significant intercept length
- Contributes to overall mineralization continuity
- Good QA/QC disclosure
Negative factors
- Low grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
TR26-07Tombstone · goldGrade: 0.479Grade Unit: g/tIntercept: 112.4 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.479
- Grade Unit
- g/t
- Intercept
- 112.4 m
- From
- 50.2 m
- To
- 162.6 m
- Intercept Depth
- 50.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:50.2-162.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.479 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 53.8 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.479”
Context: TR26-07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · silverGrade: 12.64Grade Unit: g/tIntercept: 112.4 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.64
- Grade Unit
- g/t
- Intercept
- 112.4 m
- From
- 50.2 m
- To
- 162.6 m
- Intercept Depth
- 50.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:50.2-162.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.64 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1420.7 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.64”
Context: TR26-07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · goldGrade: 0.127Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.127
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 173.2 m
- To
- 185.4 m
- Intercept Depth
- 173.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:173.2-185.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.127 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 0.127 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.127”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · silverGrade: 8.11Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.11
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 173.2 m
- To
- 185.4 m
- Intercept Depth
- 173.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:173.2-185.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.11 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 98.9 g/t·m is below.
Negative factors
- 8.11 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.11”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · goldGrade: 0.049Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.049
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 221.9 m
- To
- 238.6 m
- Intercept Depth
- 221.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:221.9-238.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.049 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.049 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.049”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-07Tombstone · silverGrade: 7.49Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- TR26-07
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.49
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 221.9 m
- To
- 238.6 m
- Intercept Depth
- 221.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-07:221.9-238.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.49 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 125.1 g/t·m is below.
Negative factors
- 7.49 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.49”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-08Tombstone · goldGrade: 0.576Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-08
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.576
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 121.6 m
- To
- 129.2 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-08:121.6-129.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.576 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.576”
Context: TR26-08
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-08Tombstone · silverGrade: 8.4Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-08
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.4
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 121.6 m
- To
- 129.2 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-08:121.6-129.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 63.8 g/t·m is below.
Negative factors
- 8.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.4”
Context: TR26-08
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · goldGrade: 0.069Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.069
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 35 m
- To
- 45.6 m
- Intercept Depth
- 35 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:35-45.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.069 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.069 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.069”
Context: TR26-09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · silverGrade: 9.06Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.06
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 35 m
- To
- 45.6 m
- Intercept Depth
- 35 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:35-45.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 9.06 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 96.0 g/t·m is below.
Negative factors
- 9.06 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.06”
Context: TR26-09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · goldGrade: 0.181Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.181
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 53.2 m
- To
- 59.3 m
- Intercept Depth
- 53.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:53.2-59.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.181 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.181 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.181”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · silverGrade: 13.1Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.1
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 53.2 m
- To
- 59.3 m
- Intercept Depth
- 53.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:53.2-59.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 13.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 79.9 g/t·m is below.
Negative factors
- 13.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.1”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · goldGrade: 0.041Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.041
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 158.1 m
- To
- 164.1 m
- Intercept Depth
- 158.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:158.1-164.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.041 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.041 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.041”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-09Tombstone · silverGrade: 7.37Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-09
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.37
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 158.1 m
- To
- 164.1 m
- Intercept Depth
- 158.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-09:158.1-164.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.37 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 45.0 g/t·m is below.
Negative factors
- 7.37 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.37”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-10 PCTombstone · goldGrade: 0.162Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-10 PC
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.162
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 112.5 m
- To
- 118.6 m
- Intercept Depth
- 112.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-10 PC:112.5-118.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.162 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 0.162 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.162”
Context: TR26-10 PC
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-10 PCTombstone · silverGrade: 9.15Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-10 PC
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.15
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 112.5 m
- To
- 118.6 m
- Intercept Depth
- 112.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-10 PC:112.5-118.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 9.15 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 55.8 g/t·m is below.
Negative factors
- 9.15 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.15”
Context: TR26-10 PC
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-11Tombstone · goldGrade: 0.173Grade Unit: g/tIntercept: 100.3 mView all detailsHide details
Identity
- Hole ID
- TR26-11
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.173
- Grade Unit
- g/t
- Intercept
- 100.3 m
- From
- 100.3 m
- To
- 200.6 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-11:100.3-200.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.173 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 17.4 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.173”
Context: TR26-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-11Tombstone · silverGrade: 11.46Grade Unit: g/tIntercept: 100.3 mView all detailsHide details
Identity
- Hole ID
- TR26-11
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.46
- Grade Unit
- g/t
- Intercept
- 100.3 m
- From
- 100.3 m
- To
- 200.6 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-11:100.3-200.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 11.46 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1149.4 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.46”
Context: TR26-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-12Tombstone · goldGrade: 0.172Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-12
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.172
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 100.3 m
- To
- 149 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-12:100.3-149
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.172 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 8.4 g/t·m is below.
Negative factors
- 0.172 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.172”
Context: TR26-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-12Tombstone · silverGrade: 18.04Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-12
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 18.04
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 100.3 m
- To
- 149 m
- Intercept Depth
- 100.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-12:100.3-149
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 18.04 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 876.7 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.04”
Context: TR26-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.056Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.056
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 18.2 m
- To
- 27.4 m
- Intercept Depth
- 18.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:18.2-27.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.056 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.056 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.056”
Context: TR26-13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 8.27Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.27
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 18.2 m
- To
- 27.4 m
- Intercept Depth
- 18.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:18.2-27.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.27 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 75.3 g/t·m is below.
Negative factors
- 8.27 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.27”
Context: TR26-13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.132Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.132
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 63.8 m
- To
- 68.8 m
- Intercept Depth
- 63.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:63.8-68.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.132 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.132 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.132”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 3.33Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.33
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 63.8 m
- To
- 68.8 m
- Intercept Depth
- 63.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:63.8-68.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.33 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 15.3 g/t·m is below.
Negative factors
- 3.33 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.33”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.039Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.039
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 85.1 m
- To
- 91.2 m
- Intercept Depth
- 85.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:85.1-91.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.039 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.039 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.039”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 5Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 85.1 m
- To
- 91.2 m
- Intercept Depth
- 85.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:85.1-91.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 30.5 g/t·m is below.
Negative factors
- 5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.00”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · goldGrade: 0.062Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.062
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 194.5 m
- To
- 200.6 m
- Intercept Depth
- 194.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:194.5-200.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.062 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.062 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.062”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-13Tombstone · silverGrade: 4.275Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-13
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.275
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 194.5 m
- To
- 200.6 m
- Intercept Depth
- 194.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-13:194.5-200.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.275 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 26.1 g/t·m is below.
Negative factors
- 4.275 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.275”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.195Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.195
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 0 m
- To
- 10.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:0-10.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.195 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.1 g/t·m is below.
Negative factors
- 0.195 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.195”
Context: TR26-14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 13Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 0 m
- To
- 10.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:0-10.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 13 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 137.8 g/t·m is below.
Negative factors
- 13 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.00”
Context: TR26-14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.618Grade Unit: g/tIntercept: 107.9 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.618
- Grade Unit
- g/t
- Intercept
- 107.9 m
- From
- 39.5 m
- To
- 147.4 m
- Intercept Depth
- 39.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:39.5-147.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.618 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 66.7 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.618”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 24.8Grade Unit: g/tIntercept: 107.9 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 24.8
- Grade Unit
- g/t
- Intercept
- 107.9 m
- From
- 39.5 m
- To
- 147.4 m
- Intercept Depth
- 39.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:39.5-147.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 24.8 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 2675.9 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“24.80”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.091Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.091
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 176.3 m
- To
- 225 m
- Intercept Depth
- 176.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:176.3-225
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.091 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.4 g/t·m is below.
Negative factors
- 0.091 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.091”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 8.11Grade Unit: g/tIntercept: 48.6 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.11
- Grade Unit
- g/t
- Intercept
- 48.6 m
- From
- 176.3 m
- To
- 225 m
- Intercept Depth
- 176.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:176.3-225
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.11 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 394.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.11”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · goldGrade: 0.121Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.121
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 234.1 m
- To
- 243.2 m
- Intercept Depth
- 234.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:234.1-243.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.121 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.121 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.121”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-14Tombstone · silverGrade: 10.67Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-14
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.67
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 234.1 m
- To
- 243.2 m
- Intercept Depth
- 234.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-14:234.1-243.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 10.67 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 97.1 g/t·m is below.
Negative factors
- 10.67 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.67”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · goldGrade: 0.214Grade Unit: g/tIntercept: 47.1 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.214
- Grade Unit
- g/t
- Intercept
- 47.1 m
- From
- 92.7 m
- To
- 139.8 m
- Intercept Depth
- 92.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:92.7-139.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.214 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 10.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.214”
Context: TR26-15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · silverGrade: 13.26Grade Unit: g/tIntercept: 47.1 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.26
- Grade Unit
- g/t
- Intercept
- 47.1 m
- From
- 92.7 m
- To
- 139.8 m
- Intercept Depth
- 92.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:92.7-139.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 13.26 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 624.5 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.26”
Context: TR26-15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · goldGrade: 0.096Grade Unit: g/tIntercept: 42.6 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.096
- Grade Unit
- g/t
- Intercept
- 42.6 m
- From
- 156.6 m
- To
- 200.6 m
- Intercept Depth
- 156.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:156.6-200.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.096 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.1 g/t·m is below.
Negative factors
- 0.096 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.096”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-15Tombstone · silverGrade: 3.42Grade Unit: g/tIntercept: 42.6 mView all detailsHide details
Identity
- Hole ID
- TR26-15
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.42
- Grade Unit
- g/t
- Intercept
- 42.6 m
- From
- 156.6 m
- To
- 200.6 m
- Intercept Depth
- 156.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-15:156.6-200.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.42 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 145.7 g/t·m is below.
Negative factors
- 3.42 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.42”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · goldGrade: 0.223Grade Unit: g/tIntercept: 89.8 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 89.8 m
- From
- 57.9 m
- To
- 147.8 m
- Intercept Depth
- 57.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:57.9-147.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.223 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 20.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.223”
Context: TR26-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · silverGrade: 10.96Grade Unit: g/tIntercept: 89.8 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.96
- Grade Unit
- g/t
- Intercept
- 89.8 m
- From
- 57.9 m
- To
- 147.8 m
- Intercept Depth
- 57.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:57.9-147.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 10.96 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 984.2 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.96”
Context: TR26-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · goldGrade: 0.069Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.069
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 164.6 m
- To
- 179.8 m
- Intercept Depth
- 164.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:164.6-179.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.069 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 0.069 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.069”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · silverGrade: 5.68Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.68
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 164.6 m
- To
- 179.8 m
- Intercept Depth
- 164.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:164.6-179.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.68 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 86.3 g/t·m is below.
Negative factors
- 5.68 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.68”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · goldGrade: 0.077Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.077
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 195 m
- To
- 198.1 m
- Intercept Depth
- 195 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:195-198.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.077 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.077 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.077”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-16Tombstone · silverGrade: 5.7Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TR26-16
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.7
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 195 m
- To
- 198.1 m
- Intercept Depth
- 195 m
Classification
- Sample Type
- drill
- Group ID
- TR26-16:195-198.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 17.7 g/t·m is below.
Negative factors
- 5.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.7”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · goldGrade: 0.613Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.613
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 62.5 m
- To
- 67.1 m
- Intercept Depth
- 62.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:62.5-67.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.613 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.613”
Context: TR26-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · silverGrade: 2.13Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.13
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 62.5 m
- To
- 67.1 m
- Intercept Depth
- 62.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:62.5-67.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.13 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.8 g/t·m is below.
Negative factors
- 2.13 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.13”
Context: TR26-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · goldGrade: 0.294Grade Unit: g/tIntercept: 121.9 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.294
- Grade Unit
- g/t
- Intercept
- 121.9 m
- From
- 82.3 m
- To
- 204.2 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:82.3-204.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.294 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 35.8 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.294”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · silverGrade: 11.3Grade Unit: g/tIntercept: 121.9 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.3
- Grade Unit
- g/t
- Intercept
- 121.9 m
- From
- 82.3 m
- To
- 204.2 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:82.3-204.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 11.3 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1377.5 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.3”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · goldGrade: 1.017Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.017
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 85.3 m
- To
- 97.5 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:85.3-97.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.017 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 12.4 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.017”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-17Tombstone · silverGrade: 14.54Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-17
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 14.54
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 85.3 m
- To
- 97.5 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-17:85.3-97.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 14.54 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 177.4 g/t·m is below.
Negative factors
- 14.54 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.54”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 0.775Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.775
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 0 m
- To
- 53.2 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:0-53.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.775 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 41.2 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.775”
Context: TR26-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 31.94Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 31.94
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 0 m
- To
- 53.2 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:0-53.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 31.94 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1699.2 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“31.94”
Context: TR26-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 1.909Grade Unit: g/tIntercept: 18.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.909
- Grade Unit
- g/t
- Intercept
- 18.2 m
- From
- 25.8 m
- To
- 44.1 m
- Intercept Depth
- 25.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:25.8-44.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.909 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 34.7 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.909”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 79.07Grade Unit: g/tIntercept: 18.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 79.07
- Grade Unit
- g/t
- Intercept
- 18.2 m
- From
- 25.8 m
- To
- 44.1 m
- Intercept Depth
- 25.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:25.8-44.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 79.07 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1439.1 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“79.07”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 0.132Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.132
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 79 m
- To
- 100.3 m
- Intercept Depth
- 79 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:79-100.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.132 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below.
Negative factors
- 0.132 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.132”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 4.41Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.41
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 79 m
- To
- 100.3 m
- Intercept Depth
- 79 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:79-100.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.41 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 93.9 g/t·m is below.
Negative factors
- 4.41 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.41”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · goldGrade: 0.084Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.084
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 111 m
- To
- 164.2 m
- Intercept Depth
- 111 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:111-164.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.084 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.5 g/t·m is below.
Negative factors
- 0.084 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.084”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-18Tombstone · silverGrade: 6.246Grade Unit: g/tIntercept: 53.2 mView all detailsHide details
Identity
- Hole ID
- TR26-18
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.246
- Grade Unit
- g/t
- Intercept
- 53.2 m
- From
- 111 m
- To
- 164.2 m
- Intercept Depth
- 111 m
Classification
- Sample Type
- drill
- Group ID
- TR26-18:111-164.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.246 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 332.3 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.246”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 1.05Grade Unit: g/tIntercept: 66.9 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 66.9 m
- From
- 13.7 m
- To
- 80.6 m
- Intercept Depth
- 13.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:13.7-80.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.05 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 70.2 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.050”
Context: TR26-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 23.21Grade Unit: g/tIntercept: 66.9 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 23.21
- Grade Unit
- g/t
- Intercept
- 66.9 m
- From
- 13.7 m
- To
- 80.6 m
- Intercept Depth
- 13.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:13.7-80.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 23.21 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1552.7 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23.21”
Context: TR26-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 2.309Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.309
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 30.4 m
- To
- 57.8 m
- Intercept Depth
- 30.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:30.4-57.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.309 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 63.3 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 2.309 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.309”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 43.23Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 43.23
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 30.4 m
- To
- 57.8 m
- Intercept Depth
- 30.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:30.4-57.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 43.23 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1184.5 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“43.23”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.162Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.162
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 88.2 m
- To
- 107.9 m
- Intercept Depth
- 88.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:88.2-107.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.162 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.2 g/t·m is below.
Negative factors
- 0.162 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.162”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 6.68Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.68
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 88.2 m
- To
- 107.9 m
- Intercept Depth
- 88.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:88.2-107.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.68 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 132.3 g/t·m is below.
Negative factors
- 6.68 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.68”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.395Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.395
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 114 m
- To
- 135.3 m
- Intercept Depth
- 114 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:114-135.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.395 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 8.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.395”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 12.37Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.37
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 114 m
- To
- 135.3 m
- Intercept Depth
- 114 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:114-135.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.37 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 263.5 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.37”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.092Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.092
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 142.9 m
- To
- 167.2 m
- Intercept Depth
- 142.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:142.9-167.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.092 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.2 g/t·m is below.
Negative factors
- 0.092 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.092”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 7.14Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.14
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 142.9 m
- To
- 167.2 m
- Intercept Depth
- 142.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:142.9-167.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.14 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 173.5 g/t·m is below.
Negative factors
- 7.14 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.14”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · goldGrade: 0.105Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.105
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 174.8 m
- To
- 199.1 m
- Intercept Depth
- 174.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:174.8-199.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.105 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.6 g/t·m is below.
Negative factors
- 0.105 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.105”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-19Tombstone · silverGrade: 10Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- TR26-19
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 174.8 m
- To
- 199.1 m
- Intercept Depth
- 174.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-19:174.8-199.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 10 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 243.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.0”
Context: Table 1B: Tombstone 2026 Reported Result
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-20Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.8 m
- To
- 73.1 m
- Intercept Depth
- 51.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-20:51.8-73.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.7 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: TR26-20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-20Tombstone · silverGrade: 9.04Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.04
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 51.8 m
- To
- 73.1 m
- Intercept Depth
- 51.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-20:51.8-73.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 9.04 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 192.6 g/t·m is below.
Negative factors
- 9.04 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.04”
Context: TR26-20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-20Tombstone · goldGrade: 0.24Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 51.8 m
- To
- 56.4 m
- Intercept Depth
- 51.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-20:51.8-56.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.24 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-20Tombstone · silverGrade: 23.37Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 23.37
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 51.8 m
- To
- 56.4 m
- Intercept Depth
- 51.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-20:51.8-56.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 23.37 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 107.5 g/t·m is below.
Negative factors
- 23.37 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23.37”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-20Tombstone · goldGrade: 0.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 94.5 m
- To
- 100.6 m
- Intercept Depth
- 94.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-20:94.5-100.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-20Tombstone · silverGrade: 7.98Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-20
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.98
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 94.5 m
- To
- 100.6 m
- Intercept Depth
- 94.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-20:94.5-100.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.98 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 48.7 g/t·m is below.
Negative factors
- 7.98 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.98”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-21Tombstone · goldGrade: 0.05Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 18.3 m
- To
- 36.6 m
- Intercept Depth
- 18.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-21:18.3-36.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: TR26-21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-21Tombstone · silverGrade: 19.03Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 19.03
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 18.3 m
- To
- 36.6 m
- Intercept Depth
- 18.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-21:18.3-36.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 19.03 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 348.2 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.03”
Context: TR26-21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-21Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 19.8 m
- To
- 24.4 m
- Intercept Depth
- 19.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-21:19.8-24.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-21Tombstone · silverGrade: 58.6Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-21
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 58.6
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 19.8 m
- To
- 24.4 m
- Intercept Depth
- 19.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-21:19.8-24.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 58.6 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 269.6 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“58.60”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-22Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 0 m
- To
- 4.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-22:0-4.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: TR26-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-22Tombstone · silverGrade: 4.23Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.23
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 0 m
- To
- 4.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-22:0-4.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.23 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.5 g/t·m is below.
Negative factors
- 4.23 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.23”
Context: TR26-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-22Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 44.2 m
- To
- 48.8 m
- Intercept Depth
- 44.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-22:44.2-48.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-22Tombstone · silverGrade: 4.67Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-22
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.67
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 44.2 m
- To
- 48.8 m
- Intercept Depth
- 44.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-22:44.2-48.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.67 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 21.5 g/t·m is below.
Negative factors
- 4.67 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.67”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-23Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 16.8 m
- To
- 39.7 m
- Intercept Depth
- 16.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-23:16.8-39.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.0 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TR26-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-23Tombstone · silverGrade: 13.04Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.04
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 16.8 m
- To
- 39.7 m
- Intercept Depth
- 16.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-23:16.8-39.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 13.04 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 298.6 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.04”
Context: TR26-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-23Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Intercept Depth
- 59.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-23:59.4-64
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-23Tombstone · silverGrade: 3.73Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.73
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Intercept Depth
- 59.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-23:59.4-64
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.73 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 17.2 g/t·m is below.
Negative factors
- 3.73 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.73”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-23Tombstone · goldGrade: 0.12Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 147.8 m
- To
- 150.8 m
- Intercept Depth
- 147.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-23:147.8-150.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.12 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-23Tombstone · silverGrade: 1.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-23
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 147.8 m
- To
- 150.8 m
- Intercept Depth
- 147.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-23:147.8-150.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.1 g/t·m is below.
Negative factors
- 1.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.70”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 12.2 m
- To
- 19.8 m
- Intercept Depth
- 12.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:12.2-19.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TR26-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · silverGrade: 15.46Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 15.46
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 12.2 m
- To
- 19.8 m
- Intercept Depth
- 12.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:12.2-19.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 15.46 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 117.5 g/t·m is below.
Negative factors
- 15.46 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.46”
Context: TR26-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · goldGrade: 0.07Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 114.3 m
- To
- 121.9 m
- Intercept Depth
- 114.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:114.3-121.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · silverGrade: 6.12Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.12
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 114.3 m
- To
- 121.9 m
- Intercept Depth
- 114.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:114.3-121.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.12 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 46.5 g/t·m is below.
Negative factors
- 6.12 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 242.3 m
- To
- 257.5 m
- Intercept Depth
- 242.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:242.3-257.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · silverGrade: 7.86Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.86
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 242.3 m
- To
- 257.5 m
- Intercept Depth
- 242.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:242.3-257.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.86 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 119.5 g/t·m is below.
Negative factors
- 7.86 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.86”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 275.8 m
- To
- 278.8 m
- Intercept Depth
- 275.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:275.8-278.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.16 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-24Tombstone · silverGrade: 1.85Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-24
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.85
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 275.8 m
- To
- 278.8 m
- Intercept Depth
- 275.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-24:275.8-278.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.85 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.6 g/t·m is below.
Negative factors
- 1.85 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.85”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-26Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 13.7 m
- To
- 18.3 m
- Intercept Depth
- 13.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-26:13.7-18.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.16 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: TR26-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-26Tombstone · silverGrade: 18.2Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 18.2
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 13.7 m
- To
- 18.3 m
- Intercept Depth
- 13.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-26:13.7-18.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 18.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 83.7 g/t·m is below.
Negative factors
- 18.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.2”
Context: TR26-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-26Tombstone · goldGrade: 0.34Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 125 m
- To
- 135.6 m
- Intercept Depth
- 125 m
Classification
- Sample Type
- drill
- Group ID
- TR26-26:125-135.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-26Tombstone · silverGrade: 19.36Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- TR26-26
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 19.36
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 125 m
- To
- 135.6 m
- Intercept Depth
- 125 m
Classification
- Sample Type
- drill
- Group ID
- TR26-26:125-135.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 19.36 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 205.2 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.36”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 35.1 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 35.1 m
- From
- 155.4 m
- To
- 190.5 m
- Intercept Depth
- 155.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:155.4-190.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TR26-28
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · silverGrade: 5.33Grade Unit: g/tIntercept: 35.1 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.33
- Grade Unit
- g/t
- Intercept
- 35.1 m
- From
- 155.4 m
- To
- 190.5 m
- Intercept Depth
- 155.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:155.4-190.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.33 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 187.1 g/t·m is below.
Negative factors
- 5.33 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.33”
Context: TR26-28
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · goldGrade: 0.2Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 199.6 m
- To
- 219.4 m
- Intercept Depth
- 199.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:199.6-219.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.0 g/t·m is below.
Negative factors
- 0.2 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.20”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · silverGrade: 20.28Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 20.28
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 199.6 m
- To
- 219.4 m
- Intercept Depth
- 199.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:199.6-219.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 20.28 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 401.5 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.28”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · goldGrade: 0.34Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 208.8 m
- To
- 219.4 m
- Intercept Depth
- 208.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:208.8-219.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · silverGrade: 33.5Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 33.5
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 208.8 m
- To
- 219.4 m
- Intercept Depth
- 208.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:208.8-219.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 33.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 358.4 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“33.50”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · goldGrade: 0.05Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 239.3 m
- To
- 242.3 m
- Intercept Depth
- 239.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:239.3-242.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-28Tombstone · silverGrade: 4.1Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-28
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 239.3 m
- To
- 242.3 m
- Intercept Depth
- 239.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-28:239.3-242.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 12.3 g/t·m is below.
Negative factors
- 4.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-29Tombstone · goldGrade: 0.1Grade Unit: g/tIntercept: 29 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 131.1 m
- To
- 160.1 m
- Intercept Depth
- 131.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-29:131.1-160.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.9 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: TR26-29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-29Tombstone · silverGrade: 8.84Grade Unit: g/tIntercept: 29 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.84
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 131.1 m
- To
- 160.1 m
- Intercept Depth
- 131.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-29:131.1-160.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.84 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 256.4 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.84”
Context: TR26-29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-29Tombstone · goldGrade: 0.44Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 144.8 m
- To
- 149.4 m
- Intercept Depth
- 144.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-29:144.8-149.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.44 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.44”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-29Tombstone · silverGrade: 28.1Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 28.1
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 144.8 m
- To
- 149.4 m
- Intercept Depth
- 144.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-29:144.8-149.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 28.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 129.3 g/t·m is below.
Negative factors
- 28.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“28.10”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-29Tombstone · goldGrade: 0.14Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 175.3 m
- To
- 179.9 m
- Intercept Depth
- 175.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-29:175.3-179.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.14 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-29Tombstone · silverGrade: 8.6Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-29
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.6
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 175.3 m
- To
- 179.9 m
- Intercept Depth
- 175.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-29:175.3-179.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 39.6 g/t·m is below.
Negative factors
- 8.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.60”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · goldGrade: 0.86Grade Unit: g/tIntercept: 198.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 198.1 m
- From
- 0 m
- To
- 198.1 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:0-198.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.86 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 170.4 g/t·m is strong (grade alone is weak; the better of the two is used).
Positive factors
- 0.86 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.86”
Context: TR26-30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · silverGrade: 24.52Grade Unit: g/tIntercept: 198.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 24.52
- Grade Unit
- g/t
- Intercept
- 198.1 m
- From
- 0 m
- To
- 198.1 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:0-198.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 24.52 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 4857.4 g/t·m is strong (grade alone is below; the better of the two is used).
Positive factors
- 24.52 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“24.52”
Context: TR26-30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · goldGrade: 1.08Grade Unit: g/tIntercept: 155.4 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 155.4 m
- From
- 6.1 m
- To
- 161.5 m
- Intercept Depth
- 6.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:6.1-161.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.08 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 167.8 g/t·m is strong (grade alone is moderate; the better of the two is used).
Positive factors
- 1.08 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.08”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · silverGrade: 30.23Grade Unit: g/tIntercept: 155.4 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 30.23
- Grade Unit
- g/t
- Intercept
- 155.4 m
- From
- 6.1 m
- To
- 161.5 m
- Intercept Depth
- 6.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:6.1-161.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 30.23 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 4697.7 g/t·m is strong (grade alone is weak; the better of the two is used).
Positive factors
- 30.23 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“30.23”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · goldGrade: 1.51Grade Unit: g/tIntercept: 16.8 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.51
- Grade Unit
- g/t
- Intercept
- 16.8 m
- From
- 24.4 m
- To
- 41.2 m
- Intercept Depth
- 24.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:24.4-41.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.51 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 25.4 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.51”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · silverGrade: 58.04Grade Unit: g/tIntercept: 16.8 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 58.04
- Grade Unit
- g/t
- Intercept
- 16.8 m
- From
- 24.4 m
- To
- 41.2 m
- Intercept Depth
- 24.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:24.4-41.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 58.04 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 975.1 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“58.04”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · goldGrade: 1.5Grade Unit: g/tIntercept: 44.2 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 44.2 m
- From
- 56.4 m
- To
- 100.6 m
- Intercept Depth
- 56.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:56.4-100.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.5 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 66.3 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.50”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · silverGrade: 60.51Grade Unit: g/tIntercept: 44.2 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 60.51
- Grade Unit
- g/t
- Intercept
- 44.2 m
- From
- 56.4 m
- To
- 100.6 m
- Intercept Depth
- 56.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:56.4-100.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 60.51 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 2674.5 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“60.51”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · goldGrade: 9.54Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.54
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 121.9 m
- To
- 128 m
- Intercept Depth
- 121.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:121.9-128
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 9.54 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 58.2 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 9.54 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.54”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-30Tombstone · silverGrade: 35.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-30
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 35.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 121.9 m
- To
- 128 m
- Intercept Depth
- 121.9 m
Classification
- Sample Type
- drill
- Group ID
- TR26-30:121.9-128
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 35.03 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 213.7 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35.03”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · goldGrade: 0.39Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 21.3 m
- To
- 32 m
- Intercept Depth
- 21.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:21.3-32
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.39 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.39”
Context: TR26-31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · silverGrade: 2.73Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.73
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 21.3 m
- To
- 32 m
- Intercept Depth
- 21.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:21.3-32
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.73 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 29.2 g/t·m is below.
Negative factors
- 2.73 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.73”
Context: TR26-31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · goldGrade: 0.42Grade Unit: g/tIntercept: 64 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 64 m
- From
- 65.5 m
- To
- 129.5 m
- Intercept Depth
- 65.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:65.5-129.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 26.9 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · silverGrade: 13.54Grade Unit: g/tIntercept: 64 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 13.54
- Grade Unit
- g/t
- Intercept
- 64 m
- From
- 65.5 m
- To
- 129.5 m
- Intercept Depth
- 65.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:65.5-129.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 13.54 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 866.6 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.54”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · goldGrade: 1.07Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 82.3 m
- To
- 103.6 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:82.3-103.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.07 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 22.8 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.07”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · silverGrade: 28.42Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 28.42
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 82.3 m
- To
- 103.6 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:82.3-103.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 28.42 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 605.3 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“28.42”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 141.7 m
- To
- 147.8 m
- Intercept Depth
- 141.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:141.7-147.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · silverGrade: 5.95Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.95
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 141.7 m
- To
- 147.8 m
- Intercept Depth
- 141.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:141.7-147.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.95 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 36.3 g/t·m is below.
Negative factors
- 5.95 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.95”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · goldGrade: 0.07Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 161.5 m
- To
- 169.2 m
- Intercept Depth
- 161.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:161.5-169.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · silverGrade: 4.12Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.12
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 161.5 m
- To
- 169.2 m
- Intercept Depth
- 161.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:161.5-169.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.12 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 31.3 g/t·m is below.
Negative factors
- 4.12 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 176.8 m
- To
- 185.9 m
- Intercept Depth
- 176.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:176.8-185.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-31Tombstone · silverGrade: 2.77Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-31
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.77
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 176.8 m
- To
- 185.9 m
- Intercept Depth
- 176.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-31:176.8-185.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.77 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 25.2 g/t·m is below.
Negative factors
- 2.77 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.77”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · goldGrade: 0.19Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 0 m
- To
- 7.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:0-7.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: TR26-33
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · silverGrade: 11.76Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.76
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 0 m
- To
- 7.6 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:0-7.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 11.76 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 89.4 g/t·m is below.
Negative factors
- 11.76 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.76”
Context: TR26-33
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · goldGrade: 0.1Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 24.4 m
- To
- 30.5 m
- Intercept Depth
- 24.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:24.4-30.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · silverGrade: 1.18Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 24.4 m
- To
- 30.5 m
- Intercept Depth
- 24.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:24.4-30.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.18 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 7.2 g/t·m is below.
Negative factors
- 1.18 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.18”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 39.6 m
- To
- 42.7 m
- Intercept Depth
- 39.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:39.6-42.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · silverGrade: 4.55Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.55
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 39.6 m
- To
- 42.7 m
- Intercept Depth
- 39.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:39.6-42.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.55 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 13.6 g/t·m is below.
Negative factors
- 4.55 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · goldGrade: 0.3Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 70.1 m
- To
- 77.7 m
- Intercept Depth
- 70.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:70.1-77.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · silverGrade: 8.88Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.88
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 70.1 m
- To
- 77.7 m
- Intercept Depth
- 70.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:70.1-77.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.88 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 67.5 g/t·m is below.
Negative factors
- 8.88 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · goldGrade: 1.5Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 85.3 m
- To
- 99.1 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:85.3-99.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.5 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 20.5 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · silverGrade: 23.56Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 23.56
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 85.3 m
- To
- 99.1 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:85.3-99.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 23.56 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 322.8 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23.56”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · goldGrade: 2.64Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 88.4 m
- To
- 96 m
- Intercept Depth
- 88.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:88.4-96
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.64 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 20.1 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 2.64 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.64”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-33Tombstone · silverGrade: 40.72Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-33
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 40.72
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 88.4 m
- To
- 96 m
- Intercept Depth
- 88.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-33:88.4-96
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 40.72 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 309.5 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“40.72”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 1.5 m
- To
- 7.6 m
- Intercept Depth
- 1.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:1.5-7.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: TR26-34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · silverGrade: 5.35Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.35
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 1.5 m
- To
- 7.6 m
- Intercept Depth
- 1.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:1.5-7.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.35 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 32.6 g/t·m is below.
Negative factors
- 5.35 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.35”
Context: TR26-34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · goldGrade: 0.19Grade Unit: g/tIntercept: 25.9 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 25.9 m
- From
- 44.2 m
- To
- 70.1 m
- Intercept Depth
- 44.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:44.2-70.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.9 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · silverGrade: 11.95Grade Unit: g/tIntercept: 25.9 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.95
- Grade Unit
- g/t
- Intercept
- 25.9 m
- From
- 44.2 m
- To
- 70.1 m
- Intercept Depth
- 44.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:44.2-70.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 11.95 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 309.5 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.95”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · goldGrade: 0.49Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 59.4 m
- To
- 68.6 m
- Intercept Depth
- 59.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:59.4-68.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.49 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.49”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · silverGrade: 20.05Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 20.05
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 59.4 m
- To
- 68.6 m
- Intercept Depth
- 59.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:59.4-68.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 20.05 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 182.5 g/t·m is below.
Negative factors
- 20.05 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.05”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 82.3 m
- To
- 86.9 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:82.3-86.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · silverGrade: 5.67Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.67
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 82.3 m
- To
- 86.9 m
- Intercept Depth
- 82.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:82.3-86.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.67 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 26.1 g/t·m is below.
Negative factors
- 5.67 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.67”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · goldGrade: 0.07Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 102.1 m
- To
- 112.8 m
- Intercept Depth
- 102.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:102.1-112.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · silverGrade: 10.5Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.5
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 102.1 m
- To
- 112.8 m
- Intercept Depth
- 102.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:102.1-112.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 10.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 112.3 g/t·m is below.
Negative factors
- 10.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 135.6 m
- To
- 146.3 m
- Intercept Depth
- 135.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:135.6-146.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-34Tombstone · silverGrade: 5.37Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- TR26-34
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.37
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 135.6 m
- To
- 146.3 m
- Intercept Depth
- 135.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-34:135.6-146.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.37 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 57.5 g/t·m is below.
Negative factors
- 5.37 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.37”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · goldGrade: 0.07Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 62.5 m
- To
- 77.7 m
- Intercept Depth
- 62.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:62.5-77.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: TR26-35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · silverGrade: 6.57Grade Unit: g/tIntercept: 15.2 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.57
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 62.5 m
- To
- 77.7 m
- Intercept Depth
- 62.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:62.5-77.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.57 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 99.9 g/t·m is below.
Negative factors
- 6.57 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.57”
Context: TR26-35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · goldGrade: 0.12Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 83.8 m
- To
- 106.7 m
- Intercept Depth
- 83.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:83.8-106.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.7 g/t·m is below.
Negative factors
- 0.12 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · silverGrade: 10.61Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.61
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 83.8 m
- To
- 106.7 m
- Intercept Depth
- 83.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:83.8-106.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 10.61 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 243.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.61”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · goldGrade: 0.18Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 97.5 m
- To
- 100.6 m
- Intercept Depth
- 97.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:97.5-100.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.18 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · silverGrade: 35.4Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 35.4
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 97.5 m
- To
- 100.6 m
- Intercept Depth
- 97.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:97.5-100.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 35.4 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 106.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35.40”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · goldGrade: 0.1Grade Unit: g/tIntercept: 24.4 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 24.4 m
- From
- 158.5 m
- To
- 182.9 m
- Intercept Depth
- 158.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:158.5-182.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.4 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-35Tombstone · silverGrade: 7.51Grade Unit: g/tIntercept: 24.4 mView all detailsHide details
Identity
- Hole ID
- TR26-35
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 7.51
- Grade Unit
- g/t
- Intercept
- 24.4 m
- From
- 158.5 m
- To
- 182.9 m
- Intercept Depth
- 158.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-35:158.5-182.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.51 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 183.2 g/t·m is below.
Negative factors
- 7.51 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.51”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 45.7 m
- To
- 54.9 m
- Intercept Depth
- 45.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:45.7-54.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TR26-36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · silverGrade: 3.7Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.7
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 45.7 m
- To
- 54.9 m
- Intercept Depth
- 45.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:45.7-54.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 33.7 g/t·m is below.
Negative factors
- 3.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.70”
Context: TR26-36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 91.4 m
- To
- 123.4 m
- Intercept Depth
- 91.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:91.4-123.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.2 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · silverGrade: 12.5Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.5
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 91.4 m
- To
- 123.4 m
- Intercept Depth
- 91.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:91.4-123.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 400.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · goldGrade: 0.55Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 102.1 m
- To
- 106.7 m
- Intercept Depth
- 102.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:102.1-106.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · silverGrade: 26.37Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 26.37
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 102.1 m
- To
- 106.7 m
- Intercept Depth
- 102.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:102.1-106.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 26.37 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 121.3 g/t·m is below.
Negative factors
- 26.37 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“26.37”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · goldGrade: 0.03Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 134.1 m
- To
- 138.7 m
- Intercept Depth
- 134.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:134.1-138.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-36Tombstone · silverGrade: 11.33Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-36
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.33
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 134.1 m
- To
- 138.7 m
- Intercept Depth
- 134.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-36:134.1-138.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 11.33 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 52.1 g/t·m is below.
Negative factors
- 11.33 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.33”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 16.8 m
- To
- 22.9 m
- Intercept Depth
- 16.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:16.8-22.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TR26-37
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 3.43Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.43
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 16.8 m
- To
- 22.9 m
- Intercept Depth
- 16.8 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:16.8-22.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.43 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 20.9 g/t·m is below.
Negative factors
- 3.43 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.43”
Context: TR26-37
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.26Grade Unit: g/tIntercept: 79.2 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 79.2 m
- From
- 45.7 m
- To
- 125 m
- Intercept Depth
- 45.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:45.7-125
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 20.6 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 8.88Grade Unit: g/tIntercept: 79.2 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.88
- Grade Unit
- g/t
- Intercept
- 79.2 m
- From
- 45.7 m
- To
- 125 m
- Intercept Depth
- 45.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:45.7-125
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.88 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 703.3 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.86Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 85.3 m
- To
- 88.4 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:85.3-88.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.86 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.86”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 22.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 22.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 85.3 m
- To
- 88.4 m
- Intercept Depth
- 85.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:85.3-88.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 22.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 68.1 g/t·m is below.
Negative factors
- 22.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“22.70”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.59Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 100.6 m
- To
- 106.7 m
- Intercept Depth
- 100.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:100.6-106.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.59 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.59”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 15.58Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 15.58
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 100.6 m
- To
- 106.7 m
- Intercept Depth
- 100.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:100.6-106.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 15.58 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 95.0 g/t·m is below.
Negative factors
- 15.58 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.58”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.05Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 131.1 m
- To
- 137.2 m
- Intercept Depth
- 131.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:131.1-137.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 6.35Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.35
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 131.1 m
- To
- 137.2 m
- Intercept Depth
- 131.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:131.1-137.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.35 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 38.7 g/t·m is below.
Negative factors
- 6.35 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.35”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 146.3 m
- To
- 153.9 m
- Intercept Depth
- 146.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:146.3-153.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 3.1Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 146.3 m
- To
- 153.9 m
- Intercept Depth
- 146.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:146.3-153.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 23.6 g/t·m is below.
Negative factors
- 3.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 161.5 m
- To
- 164.6 m
- Intercept Depth
- 161.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:161.5-164.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 6.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 161.5 m
- To
- 164.6 m
- Intercept Depth
- 161.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:161.5-164.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.45 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.4 g/t·m is below.
Negative factors
- 6.45 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.45”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 192 m
- To
- 205.7 m
- Intercept Depth
- 192 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:192-205.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.8 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-37Tombstone · silverGrade: 5.68Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- TR26-37
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.68
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 192 m
- To
- 205.7 m
- Intercept Depth
- 192 m
Classification
- Sample Type
- drill
- Group ID
- TR26-37:192-205.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.68 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 77.8 g/t·m is below.
Negative factors
- 5.68 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.68”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · goldGrade: 1.06Grade Unit: g/tIntercept: 97.5 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 97.5 m
- From
- 0 m
- To
- 97.5 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:0-97.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.06 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 103.4 g/t·m is strong (grade alone is moderate; the better of the two is used).
Positive factors
- 1.06 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.06”
Context: TR26-38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · silverGrade: 16.08Grade Unit: g/tIntercept: 97.5 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 16.08
- Grade Unit
- g/t
- Intercept
- 97.5 m
- From
- 0 m
- To
- 97.5 m
- Intercept Depth
- 0 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:0-97.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 16.08 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1567.8 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.08”
Context: TR26-38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · goldGrade: 4.6Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 68.6 m
- To
- 86.9 m
- Intercept Depth
- 68.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:68.6-86.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.6 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 84.2 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 4.6 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.60”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · silverGrade: 52.49Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 52.49
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 68.6 m
- To
- 86.9 m
- Intercept Depth
- 68.6 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:68.6-86.9
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 52.49 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 960.6 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“52.49”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · goldGrade: 12.17Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.17
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 79.2 m
- To
- 85.3 m
- Intercept Depth
- 79.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:79.2-85.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.17 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 74.2 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.17 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.17”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · silverGrade: 69.08Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 69.08
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 79.2 m
- To
- 85.3 m
- Intercept Depth
- 79.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:79.2-85.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 69.08 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 421.4 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“69.08”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · goldGrade: 0.1Grade Unit: g/tIntercept: 106.7 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 106.7 m
- From
- 105.2 m
- To
- 211.8 m
- Intercept Depth
- 105.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:105.2-211.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 10.7 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-38Tombstone · silverGrade: 4.16Grade Unit: g/tIntercept: 106.7 mView all detailsHide details
Identity
- Hole ID
- TR26-38
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.16
- Grade Unit
- g/t
- Intercept
- 106.7 m
- From
- 105.2 m
- To
- 211.8 m
- Intercept Depth
- 105.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-38:105.2-211.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.16 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 443.9 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.16”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 1.42Grade Unit: g/tIntercept: 88.4 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
- Intercept
- 88.4 m
- From
- 10.7 m
- To
- 99.1 m
- Intercept Depth
- 10.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:10.7-99.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.42 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 125.5 g/t·m is strong (grade alone is moderate; the better of the two is used).
Positive factors
- 1.42 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.42”
Context: TR26-39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 14.58Grade Unit: g/tIntercept: 88.4 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 14.58
- Grade Unit
- g/t
- Intercept
- 88.4 m
- From
- 10.7 m
- To
- 99.1 m
- Intercept Depth
- 10.7 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:10.7-99.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 14.58 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1288.9 g/t·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.58”
Context: TR26-39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 1.55Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 1.55
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 27.4 m
- To
- 33.5 m
- Intercept Depth
- 27.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:27.4-33.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.55 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 9.5 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.55”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 4.53Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.53
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 27.4 m
- To
- 33.5 m
- Intercept Depth
- 27.4 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:27.4-33.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.53 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 27.6 g/t·m is below.
Negative factors
- 4.53 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.53”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 6.38Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.38
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 64 m
- To
- 76.2 m
- Intercept Depth
- 64 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:64-76.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.38 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 77.8 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.38 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.38”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 33.93Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 33.93
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 64 m
- To
- 76.2 m
- Intercept Depth
- 64 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:64-76.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 33.93 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 413.9 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“33.93”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 12.23Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.23
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 65.5 m
- To
- 71.6 m
- Intercept Depth
- 65.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:65.5-71.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.23 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 74.6 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.23 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.23”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 56.28Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 56.28
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 65.5 m
- To
- 71.6 m
- Intercept Depth
- 65.5 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:65.5-71.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 56.28 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 343.3 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“56.28”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 0.07Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 134.1 m
- To
- 137.2 m
- Intercept Depth
- 134.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:134.1-137.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 6.9Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 6.9
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 134.1 m
- To
- 137.2 m
- Intercept Depth
- 134.1 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:134.1-137.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 6.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 20.7 g/t·m is below.
Negative factors
- 6.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.90”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 0.18Grade Unit: g/tIntercept: 30.5 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 30.5 m
- From
- 146.3 m
- To
- 176.8 m
- Intercept Depth
- 146.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:146.3-176.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 5.5 g/t·m is below.
Negative factors
- 0.18 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 5.63Grade Unit: g/tIntercept: 30.5 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.63
- Grade Unit
- g/t
- Intercept
- 30.5 m
- From
- 146.3 m
- To
- 176.8 m
- Intercept Depth
- 146.3 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:146.3-176.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.63 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 171.7 g/t·m is below.
Negative factors
- 5.63 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.63”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · goldGrade: 0.56Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 169.2 m
- To
- 173.7 m
- Intercept Depth
- 169.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:169.2-173.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.56 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.56”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TR26-39Tombstone · silverGrade: 11.97Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TR26-39
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 11.97
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 169.2 m
- To
- 173.7 m
- Intercept Depth
- 169.2 m
Classification
- Sample Type
- drill
- Group ID
- TR26-39:169.2-173.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 11.97 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 55.1 g/t·m is below.
Negative factors
- 11.97 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.97”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-01Tombstone · goldGrade: 0.01Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-01
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 256 m
- To
- 268.2 m
- Intercept Depth
- 256 m
Classification
- Sample Type
- drill
- Group ID
- TC25-01:256-268.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TC25-01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-01Tombstone · silverGrade: 4.7Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-01
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.7
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 256 m
- To
- 268.2 m
- Intercept Depth
- 256 m
Classification
- Sample Type
- drill
- Group ID
- TC25-01:256-268.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 57.3 g/t·m is below.
Negative factors
- 4.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.70”
Context: TC25-01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-02Tombstone · goldGrade: 0.03Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-02
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 341.7 m
- To
- 344.7 m
- Intercept Depth
- 341.7 m
Classification
- Sample Type
- drill
- Group ID
- TC25-02:341.7-344.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TC25-02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-02Tombstone · silverGrade: 10.6Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-02
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 10.6
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 341.7 m
- To
- 344.7 m
- Intercept Depth
- 341.7 m
Classification
- Sample Type
- drill
- Group ID
- TC25-02:341.7-344.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 10.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 31.8 g/t·m is below.
Negative factors
- 10.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.60”
Context: TC25-02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · goldGrade: 0.16Grade Unit: g/tIntercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 10.1 m
- From
- 183.5 m
- To
- 193.6 m
- Intercept Depth
- 183.5 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:183.5-193.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 0.16 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: TC25-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · silverGrade: 12.72Grade Unit: g/tIntercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 12.72
- Grade Unit
- g/t
- Intercept
- 10.1 m
- From
- 183.5 m
- To
- 193.6 m
- Intercept Depth
- 183.5 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:183.5-193.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.72 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 128.5 g/t·m is below.
Negative factors
- 12.72 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.72”
Context: TC25-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 202.7 m
- To
- 207.3 m
- Intercept Depth
- 202.7 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:202.7-207.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · silverGrade: 5.57Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.57
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 202.7 m
- To
- 207.3 m
- Intercept Depth
- 202.7 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:202.7-207.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.57 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 25.6 g/t·m is below.
Negative factors
- 5.57 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.57”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 213.4 m
- To
- 225.6 m
- Intercept Depth
- 213.4 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:213.4-225.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · silverGrade: 14.2Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 14.2
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 213.4 m
- To
- 225.6 m
- Intercept Depth
- 213.4 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:213.4-225.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 14.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 173.2 g/t·m is below.
Negative factors
- 14.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.20”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · goldGrade: 0.06Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 379.5 m
- To
- 384.1 m
- Intercept Depth
- 379.5 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:379.5-384.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · silverGrade: 5.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 5.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 379.5 m
- To
- 384.1 m
- Intercept Depth
- 379.5 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:379.5-384.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 5.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 25.3 g/t·m is below.
Negative factors
- 5.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · goldGrade: 0.64Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 545.6 m
- To
- 550.2 m
- Intercept Depth
- 545.6 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:545.6-550.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.64 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.64”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-03Tombstone · silverGrade: 2.65Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- TC25-03
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 2.65
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 545.6 m
- To
- 550.2 m
- Intercept Depth
- 545.6 m
Classification
- Sample Type
- drill
- Group ID
- TC25-03:545.6-550.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.65 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 12.2 g/t·m is below.
Negative factors
- 2.65 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · goldGrade: 0.04Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 303.3 m
- To
- 309.4 m
- Intercept Depth
- 303.3 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:303.3-309.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TC25-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · silverGrade: 3.93Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 3.93
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 303.3 m
- To
- 309.4 m
- Intercept Depth
- 303.3 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:303.3-309.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 3.93 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 24.0 g/t·m is below.
Negative factors
- 3.93 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.93”
Context: TC25-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · goldGrade: 0.03Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 317 m
- To
- 323.1 m
- Intercept Depth
- 317 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:317-323.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · silverGrade: 4.53Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 4.53
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 317 m
- To
- 323.1 m
- Intercept Depth
- 317 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:317-323.1
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.53 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 27.6 g/t·m is below.
Negative factors
- 4.53 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.53”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · goldGrade: 0.08Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 336.8 m
- To
- 368.8 m
- Intercept Depth
- 336.8 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:336.8-368.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.6 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · silverGrade: 9.96Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 9.96
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 336.8 m
- To
- 368.8 m
- Intercept Depth
- 336.8 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:336.8-368.8
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 9.96 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 318.7 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.96”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · goldGrade: 0.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 338.3 m
- To
- 341.3 m
- Intercept Depth
- 338.3 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:338.3-341.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · silverGrade: 35.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 35.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 338.3 m
- To
- 341.3 m
- Intercept Depth
- 338.3 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:338.3-341.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 35.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 106.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35.50”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · goldGrade: 0.09Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 393.2 m
- To
- 399.3 m
- Intercept Depth
- 393.2 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:393.2-399.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · silverGrade: 8.25Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.25
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 393.2 m
- To
- 399.3 m
- Intercept Depth
- 393.2 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:393.2-399.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.25 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 50.3 g/t·m is below.
Negative factors
- 8.25 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.25”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · goldGrade: 0.13Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 495.3 m
- To
- 498.3 m
- Intercept Depth
- 495.3 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:495.3-498.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TC25-04Tombstone · silverGrade: 8.55Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TC25-04
- Project
- Tombstone
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- AZT
Geometry
- Grade
- 8.55
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 495.3 m
- To
- 498.3 m
- Intercept Depth
- 495.3 m
Classification
- Sample Type
- drill
- Group ID
- TC25-04:495.3-498.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Bureau Veritas and Skyline Labs
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 8.55 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 25.7 g/t·m is below.
Negative factors
- 8.55 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.