Brixton Metals Reports Consistent Silver Grades Across All 85 Holes from Maiden Tailings Drill Program at the Langis Silver Project
Original announcement by globenewswire on
- Company
- Brixton Metals Corporation
- Ticker
- BBB
- Exchange
- Unavailable
- Region
- Ontario, Canada
- Primary commodity
- Silver
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-12 01:23:11 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Brixton Metals reported results from its maiden 85-hole sonic drill program at the Langis Silver Project tailings, with all holes returning silver mineralization. The program averaged 61.7 g/t silver on a length-weighted basis, including a high of 810 g/t silver over 0.50 m. The consistent grade profile supports the company's objective of defining a maiden Mineral Resource Estimate and advancing a recovery and remediation plan.
Reasoning: Maiden drill program on tailings at the Langis Silver Project returned consistent silver grades across all 85 holes, with significant high-grade intercepts, supporting future resource estimation and potential reprocessing in a well-serviced mining district.
Positive factors
- All 85 holes returned silver-mineralized tailings material, indicating widespread mineralization.
- Consistent grade profile from hole to hole supports straightforward resource estimation.
- High-grade intercepts up to 810 g/t silver were reported.
- True thickness of mineralization was reported for all intervals.
- Comprehensive QA/QC procedures were disclosed, including certified labs and umpire samples.
- Project is located in a well-serviced mining district with existing infrastructure (highway, rail, power).
- Potential for near-term cash flow from surface material (tailings) with simple excavation.
Negative factors
- Results are from tailings material, which may present specific metallurgical challenges (though test work is underway).
- No Mineral Resource Estimate has been defined yet.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 89
Classification and evidence
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document states: 'Reported intervals represent the full mineralized tailings thickness intersected in each hole (true thickness).'
Evidence · text
“Reported intervals represent the full mineralized tailings thickness intersected in each hole (true thickness).”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab (ALS ISO 17025), umpire samples (Bureau Veritas), and methods (blanks, standards, pulp repeats).
Evidence · text
“ALS is an ISO 17025 accredited laboratory. Rejects representing half of each sample are retained and composited for metallurgical test work, which is being conducted by SGS Canada Inc. (“SGS”). Umpire samples are submitted to Bureau Veritas Commodities Canada Ltd. (“Bureau Veritas”) for routine third-party verification. Brixton inserts independent certified reference material and blanks into the sample stream and assays routine pulp repeats at a rate of 15% as part of its quality assurance and quality control protocols.”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole LT-26-051 returned 0.50 m at 810.00 g/t silver, which is exceptionally high-grade for silver (above 500 g/t exceptional threshold).
Evidence · table
“810.00”
Context: 0.50
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The program comprised 85 sonic drill holes distributed across the mapped extent of the historic tailings on a nominal 40 m by 40 m grid, with the objective of defining a maiden Mineral Resource Estimate.
Evidence · text
“The 2026 program comprised 85 sonic drill holes distributed across the mapped extent of the historic tailings on a nominal 40 m by 40 m grid (Figure 2), with an average nearest-neighbour collar spacing of approximately 37 m.”
Extracted facts
Stored fact records: 89. Some facts used in scoring do not have a stored record.
Drill Results (89)
LT-26-001Langis · silverGrade: 49.13Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LT-26-001
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 49.13
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 3 m
- From
- 0 m
- To
- 3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-001:0-3
- Mining Method
- open_pit
Location
- Easting
- 606527
- Northing
- 5270639
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“49.13”
Context: 3.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-002Langis · silverGrade: 37.6Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LT-26-002
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 37.6
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 1.1 m
- From
- 0 m
- To
- 1.1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-002:0-1.1
- Mining Method
- open_pit
Location
- Easting
- 606487
- Northing
- 5270646
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“37.60”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-003Langis · silverGrade: 39.95Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-003
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 39.95
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-003:0-1.2
- Mining Method
- open_pit
Location
- Easting
- 606447
- Northing
- 5270651
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“39.95”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-004Langis · silverGrade: 38Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-004
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 38
- Grade Unit
- g/t
- Intercept
- 0.4 m
- True Width
- 0.4 m
- From
- 0 m
- To
- 0.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-004:0-0.4
- Mining Method
- open_pit
Location
- Easting
- 606407
- Northing
- 5270653
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 191 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a very narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“38.00”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-005Langis · silverGrade: 41.85Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-005
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 41.85
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.8 m
- From
- 0 m
- To
- 0.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-005:0-0.8
- Mining Method
- open_pit
Location
- Easting
- 606370
- Northing
- 5270657
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“41.85”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-006Langis · silverGrade: 46.9Grade Unit: g/tIntercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-006
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 46.9
- Grade Unit
- g/t
- Intercept
- 0.2 m
- True Width
- 0.2 m
- From
- 0 m
- To
- 0.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-006:0-0.2
- Mining Method
- open_pit
Location
- Easting
- 606356
- Northing
- 5270619
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 191 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a very narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“46.90”
Context: 0.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-007Langis · silverGrade: 45.3Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-007
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 45.3
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.9 m
- From
- 0 m
- To
- 0.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-007:0-0.9
- Mining Method
- open_pit
Location
- Easting
- 606396
- Northing
- 5270618
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“45.30”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-008Langis · silverGrade: 48.24Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-008
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.24
- Grade Unit
- g/t
- Intercept
- 1.9 m
- True Width
- 1.9 m
- From
- 0 m
- To
- 1.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-008:0-1.9
- Mining Method
- open_pit
Location
- Easting
- 606436
- Northing
- 5270613
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“48.24”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-009Langis · silverGrade: 48.09Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-009
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.09
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-009:0-1.75
- Mining Method
- open_pit
Location
- Easting
- 606476
- Northing
- 5270610
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“48.09”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-010Langis · silverGrade: 79.53Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-010
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 79.53
- Grade Unit
- g/t
- Intercept
- 2.25 m
- True Width
- 2.25 m
- From
- 0 m
- To
- 2.25 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-010:0-2.25
- Mining Method
- open_pit
Location
- Easting
- 606520
- Northing
- 5270604
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“79.53”
Context: 2.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-011Langis · silverGrade: 49.27Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-011
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 49.27
- Grade Unit
- g/t
- Intercept
- 2.25 m
- True Width
- 2.25 m
- From
- 0 m
- To
- 2.25 m
- Hole Depth
- 2.44 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-011:0-2.25
- Mining Method
- open_pit
Location
- Easting
- 606555
- Northing
- 5270601
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“49.27”
Context: 2.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-012Langis · silverGrade: 51.69Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-012
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.69
- Grade Unit
- g/t
- Intercept
- 2.8 m
- True Width
- 2.8 m
- From
- 0 m
- To
- 2.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-012:0-2.8
- Mining Method
- open_pit
Location
- Easting
- 606567
- Northing
- 5270563
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“51.69”
Context: 2.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-013Langis · silverGrade: 61.65Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-013
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 61.65
- Grade Unit
- g/t
- Intercept
- 1.65 m
- True Width
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-013:0-1.65
- Mining Method
- open_pit
Location
- Easting
- 606528
- Northing
- 5270565
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“61.65”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-014Langis · silverGrade: 58.94Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-014
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 58.94
- Grade Unit
- g/t
- Intercept
- 2.4 m
- True Width
- 2.4 m
- From
- 0 m
- To
- 2.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-014:0-2.4
- Mining Method
- open_pit
Location
- Easting
- 606487
- Northing
- 5270567
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“58.94”
Context: 2.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-015Langis · silverGrade: 47.98Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-015
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 47.98
- Grade Unit
- g/t
- Intercept
- 1.9 m
- True Width
- 1.9 m
- From
- 0 m
- To
- 1.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-015:0-1.9
- Mining Method
- open_pit
Location
- Easting
- 606448
- Northing
- 5270573
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“47.98”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-016Langis · silverGrade: 50.31Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-016
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.31
- Grade Unit
- g/t
- Intercept
- 1.8 m
- True Width
- 1.8 m
- From
- 0 m
- To
- 1.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-016:0-1.8
- Mining Method
- open_pit
Location
- Easting
- 606407
- Northing
- 5270575
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“50.31”
Context: 1.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-017Langis · silverGrade: 52.31Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-017
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.31
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-017:0-1.2
- Mining Method
- open_pit
Location
- Easting
- 606367
- Northing
- 5270580
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“52.31”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-018Langis · silverGrade: 53.76Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-018
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 53.76
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.25 m
- From
- 0 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-018:0-1.25
- Mining Method
- open_pit
Location
- Easting
- 606366
- Northing
- 5270541
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“53.76”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-019Langis · silverGrade: 49.73Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-019
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 49.73
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-019:0-1.5
- Mining Method
- open_pit
Location
- Easting
- 606407
- Northing
- 5270538
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“49.73”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-020Langis · silverGrade: 50.99Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LT-26-020
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.99
- Grade Unit
- g/t
- Intercept
- 2.7 m
- True Width
- 2.7 m
- From
- 0 m
- To
- 2.7 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-020:0-2.7
- Mining Method
- open_pit
Location
- Easting
- 606449
- Northing
- 5270535
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“50.99”
Context: 2.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-021Langis · silverGrade: 53.72Grade Unit: g/tIntercept: 2.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-021
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 53.72
- Grade Unit
- g/t
- Intercept
- 2.65 m
- True Width
- 2.65 m
- From
- 0 m
- To
- 2.65 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-021:0-2.65
- Mining Method
- open_pit
Location
- Easting
- 606488
- Northing
- 5270533
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“53.72”
Context: 2.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-022Langis · silverGrade: 55.79Grade Unit: g/tIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- LT-26-022
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 55.79
- Grade Unit
- g/t
- Intercept
- 3.7 m
- True Width
- 3.7 m
- From
- 0 m
- To
- 3.7 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-022:0-3.7
- Mining Method
- open_pit
Location
- Easting
- 606527
- Northing
- 5270528
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a good width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“55.79”
Context: 3.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-023Langis · silverGrade: 66.24Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-023
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 66.24
- Grade Unit
- g/t
- Intercept
- 2.3 m
- True Width
- 2.3 m
- From
- 0 m
- To
- 2.3 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-023:0-2.3
- Mining Method
- open_pit
Location
- Easting
- 606568
- Northing
- 5270527
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“66.24”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-024Langis · silverGrade: 50.82Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- LT-26-024
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.82
- Grade Unit
- g/t
- Intercept
- 2.45 m
- True Width
- 2.45 m
- From
- 0 m
- To
- 2.45 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-024:0-2.45
- Mining Method
- open_pit
Location
- Easting
- 606554
- Northing
- 5270500
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“50.82”
Context: 2.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-025Langis · silverGrade: 50.1Grade Unit: g/tIntercept: 3.55 mView all detailsHide details
Identity
- Hole ID
- LT-26-025
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.1
- Grade Unit
- g/t
- Intercept
- 3.55 m
- True Width
- 3.55 m
- From
- 0 m
- To
- 3.55 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-025:0-3.55
- Mining Method
- open_pit
Location
- Easting
- 606521
- Northing
- 5270503
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a good width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“50.10”
Context: 3.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.55
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-026Langis · silverGrade: 46.58Grade Unit: g/tIntercept: 2.58 mView all detailsHide details
Identity
- Hole ID
- LT-26-026
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 46.58
- Grade Unit
- g/t
- Intercept
- 2.58 m
- True Width
- 2.58 m
- From
- 0 m
- To
- 2.58 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-026:0-2.58
- Mining Method
- open_pit
Location
- Easting
- 606488
- Northing
- 5270494
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 203 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“46.58”
Context: 2.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.58
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-027Langis · silverGrade: 55.39Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-027
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 55.39
- Grade Unit
- g/t
- Intercept
- 2.3 m
- True Width
- 2.3 m
- From
- 0 m
- To
- 2.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-027:0-2.3
- Mining Method
- open_pit
Location
- Easting
- 606451
- Northing
- 5270501
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 203 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“55.39”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-028Langis · silverGrade: 45.54Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-028
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 45.54
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.3 m
- From
- 0 m
- To
- 1.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-028:0-1.3
- Mining Method
- open_pit
Location
- Easting
- 606409
- Northing
- 5270503
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“45.54”
Context: 1.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-029Langis · silverGrade: 46.8Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-029
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 46.8
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.9 m
- From
- 0 m
- To
- 0.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-029:0-0.9
- Mining Method
- open_pit
Location
- Easting
- 606370
- Northing
- 5270494
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“46.80”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-030Langis · silverGrade: 42.27Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-030
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 42.27
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-030:0-1
- Mining Method
- open_pit
Location
- Easting
- 606373
- Northing
- 5270457
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 203 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“42.27”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-031Langis · silverGrade: 50.23Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-031
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.23
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-031:0-1.5
- Mining Method
- open_pit
Location
- Easting
- 606415
- Northing
- 5270464
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 205 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“50.23”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-032Langis · silverGrade: 55.98Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LT-26-032
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 55.98
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-032:0-2
- Mining Method
- open_pit
Location
- Easting
- 606457
- Northing
- 5270468
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 206 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“55.98”
Context: 2.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-033Langis · silverGrade: 51.36Grade Unit: g/tIntercept: 2.35 mView all detailsHide details
Identity
- Hole ID
- LT-26-033
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.36
- Grade Unit
- g/t
- Intercept
- 2.35 m
- True Width
- 2.35 m
- From
- 0 m
- To
- 2.35 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-033:0-2.35
- Mining Method
- open_pit
Location
- Easting
- 606497
- Northing
- 5270461
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 206 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“51.36”
Context: 2.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.35
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-034Langis · silverGrade: 51.1Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-034
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.1
- Grade Unit
- g/t
- Intercept
- 1.65 m
- True Width
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 2.13 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-034:0-1.65
- Mining Method
- open_pit
Location
- Easting
- 606531
- Northing
- 5270447
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 205 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“51.10”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-035Langis · silverGrade: 44.96Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-035
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 44.96
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.25 m
- From
- 0 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-035:0-1.25
- Mining Method
- open_pit
Location
- Easting
- 606503
- Northing
- 5270421
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“44.96”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-036Langis · silverGrade: 52.75Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-036
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.75
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-036:0-1
- Mining Method
- open_pit
Location
- Easting
- 606462
- Northing
- 5270417
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“52.75”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-037Langis · silverGrade: 65.64Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-037
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 65.64
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.9 m
- From
- 0 m
- To
- 0.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-037:0-0.9
- Mining Method
- open_pit
Location
- Easting
- 606420
- Northing
- 5270415
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“65.64”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-038Langis · silverGrade: 59.06Grade Unit: g/tIntercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- LT-26-038
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.06
- Grade Unit
- g/t
- Intercept
- 0.93 m
- True Width
- 0.93 m
- From
- 0 m
- To
- 0.93 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-038:0-0.93
- Mining Method
- open_pit
Location
- Easting
- 606382
- Northing
- 5270417
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“59.06”
Context: 0.93
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.93
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-039Langis · silverGrade: 59.7Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LT-26-039
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.7
- Grade Unit
- g/t
- Intercept
- 0.6 m
- True Width
- 0.6 m
- From
- 0 m
- To
- 0.6 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-039:0-0.6
- Mining Method
- open_pit
Location
- Easting
- 606397
- Northing
- 5270378
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“59.70”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-040Langis · silverGrade: 53.05Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-040
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 53.05
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.8 m
- From
- 0 m
- To
- 0.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-040:0-0.8
- Mining Method
- open_pit
Location
- Easting
- 606441
- Northing
- 5270382
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“53.05”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-041Langis · silverGrade: 69.95Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-041
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 69.95
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-041:0-1
- Mining Method
- open_pit
Location
- Easting
- 606564
- Northing
- 5270721
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“69.95”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-042Langis · silverGrade: 52.76Grade Unit: g/tIntercept: 1.16 mView all detailsHide details
Identity
- Hole ID
- LT-26-042
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.76
- Grade Unit
- g/t
- Intercept
- 1.16 m
- True Width
- 1.16 m
- From
- 0 m
- To
- 1.16 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-042:0-1.16
- Mining Method
- open_pit
Location
- Easting
- 606527
- Northing
- 5270720
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 195 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“52.76”
Context: 1.16
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-043Langis · silverGrade: 66.56Grade Unit: g/tIntercept: 1.02 mView all detailsHide details
Identity
- Hole ID
- LT-26-043
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 66.56
- Grade Unit
- g/t
- Intercept
- 1.02 m
- True Width
- 1.02 m
- From
- 0 m
- To
- 1.02 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-043:0-1.02
- Mining Method
- open_pit
Location
- Easting
- 606488
- Northing
- 5270720
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“66.56”
Context: 1.02
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-044Langis · silverGrade: 71.24Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- LT-26-044
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 71.24
- Grade Unit
- g/t
- Intercept
- 0.86 m
- True Width
- 0.86 m
- From
- 0 m
- To
- 0.86 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-044:0-0.86
- Mining Method
- open_pit
Location
- Easting
- 606449
- Northing
- 5270716
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“71.24”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-045Langis · silverGrade: 77.4Grade Unit: g/tIntercept: 0.16 mView all detailsHide details
Identity
- Hole ID
- LT-26-045
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 77.4
- Grade Unit
- g/t
- Intercept
- 0.16 m
- True Width
- 0.16 m
- From
- 0 m
- To
- 0.16 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-045:0-0.16
- Mining Method
- open_pit
Location
- Easting
- 606406
- Northing
- 5270717
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a very narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“77.40”
Context: 0.16
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-046Langis · silverGrade: 85.3Grade Unit: g/tIntercept: 0.53 mView all detailsHide details
Identity
- Hole ID
- LT-26-046
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 85.3
- Grade Unit
- g/t
- Intercept
- 0.53 m
- True Width
- 0.53 m
- From
- 0 m
- To
- 0.53 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-046:0-0.53
- Mining Method
- open_pit
Location
- Easting
- 606403
- Northing
- 5270757
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“85.30”
Context: 0.53
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.53
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-047Langis · silverGrade: 70.35Grade Unit: g/tIntercept: 0.92 mView all detailsHide details
Identity
- Hole ID
- LT-26-047
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 70.35
- Grade Unit
- g/t
- Intercept
- 0.92 m
- True Width
- 0.92 m
- From
- 0 m
- To
- 0.92 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-047:0-0.92
- Mining Method
- open_pit
Location
- Easting
- 606444
- Northing
- 5270757
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“70.35”
Context: 0.92
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-048Langis · silverGrade: 63.41Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-048
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 63.41
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-048:0-1.2
- Mining Method
- open_pit
Location
- Easting
- 606485
- Northing
- 5270759
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“63.41”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-049Langis · silverGrade: 44.75Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-049
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 44.75
- Grade Unit
- g/t
- Intercept
- 1.4 m
- True Width
- 1.4 m
- From
- 0 m
- To
- 1.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-049:0-1.4
- Mining Method
- open_pit
Location
- Easting
- 606526
- Northing
- 5270760
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“44.75”
Context: 1.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-050Langis · silverGrade: 56.04Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-050
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 56.04
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-050:0-1.75
- Mining Method
- open_pit
Location
- Easting
- 606564
- Northing
- 5270760
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“56.04”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-051Langis · silverGrade: 311.66Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- LT-26-051
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 311.66
- Grade Unit
- g/t
- Intercept
- 1.53 m
- True Width
- 1.53 m
- From
- 0 m
- To
- 1.53 m
- Hole Depth
- 2.13 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-051:0-1.53
- Mining Method
- open_pit
Location
- Easting
- 606603
- Northing
- 5270759
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Highest-grade intercept from maiden tailings program shows exceptional silver grade over a moderate width.
Positive factors
- Exceptional silver grade for tailings material.
- True width reported.
Evidence · table
“311.66”
Context: 1.53
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.53
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-051Langis · silverGrade: 810Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-051
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 810
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.5 m
- From
- 0 m
- To
- 0.5 m
- Hole Depth
- 2.13 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-051:0-0.5
- Mining Method
- open_pit
Location
- Easting
- 606603
- Northing
- 5270759
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Bonanza-grade sub-interval from maiden tailings program shows extremely high silver grade over a narrow width.
Positive factors
- Bonanza silver grade for tailings material.
- True width reported.
Evidence · table
“810.00”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-052Langis · silverGrade: 62.57Grade Unit: g/tIntercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- LT-26-052
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.57
- Grade Unit
- g/t
- Intercept
- 0.91 m
- True Width
- 0.91 m
- From
- 0 m
- To
- 0.91 m
- Hole Depth
- 0.91 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-052:0-0.91
- Mining Method
- open_pit
Location
- Easting
- 606631
- Northing
- 5270797
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“62.57”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.91
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-053Langis · silverGrade: 62.31Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-053
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.31
- Grade Unit
- g/t
- Intercept
- 2.2 m
- True Width
- 2.2 m
- From
- 0 m
- To
- 2.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-053:0-2.2
- Mining Method
- open_pit
Location
- Easting
- 606595
- Northing
- 5270802
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“62.31”
Context: 2.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-054Langis · silverGrade: 45.73Grade Unit: g/tIntercept: 1.54 mView all detailsHide details
Identity
- Hole ID
- LT-26-054
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 45.73
- Grade Unit
- g/t
- Intercept
- 1.54 m
- True Width
- 1.54 m
- From
- 0 m
- To
- 1.54 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-054:0-1.54
- Mining Method
- open_pit
Location
- Easting
- 606555
- Northing
- 5270803
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“45.73”
Context: 1.54
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.54
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-055Langis · silverGrade: 51.97Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-055
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.97
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-055:0-1.2
- Mining Method
- open_pit
Location
- Easting
- 606515
- Northing
- 5270804
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“51.97”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-056Langis · silverGrade: 62.36Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-056
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.36
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.8 m
- From
- 0 m
- To
- 0.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-056:0-0.8
- Mining Method
- open_pit
Location
- Easting
- 606476
- Northing
- 5270804
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“62.36”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-057Langis · silverGrade: 70.32Grade Unit: g/tIntercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-057
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 70.32
- Grade Unit
- g/t
- Intercept
- 0.65 m
- True Width
- 0.65 m
- From
- 0 m
- To
- 0.65 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-057:0-0.65
- Mining Method
- open_pit
Location
- Easting
- 606436
- Northing
- 5270806
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“70.32”
Context: 0.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-058Langis · silverGrade: 68.05Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-058
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 68.05
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-058:0-1
- Mining Method
- open_pit
Location
- Easting
- 606439
- Northing
- 5270846
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“68.05”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-059Langis · silverGrade: 74.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-059
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 74.8
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-059:0-1
- Mining Method
- open_pit
Location
- Easting
- 606479
- Northing
- 5270846
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“74.80”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-060Langis · silverGrade: 67.42Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LT-26-060
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 67.42
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-060:0-2
- Mining Method
- open_pit
Location
- Easting
- 606520
- Northing
- 5270844
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“67.42”
Context: 2.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-061Langis · silverGrade: 41.79Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- LT-26-061
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 41.79
- Grade Unit
- g/t
- Intercept
- 1.35 m
- True Width
- 1.35 m
- From
- 0 m
- To
- 1.35 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-061:0-1.35
- Mining Method
- open_pit
Location
- Easting
- 606560
- Northing
- 5270842
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“41.79”
Context: 1.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.35
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-062Langis · silverGrade: 68.24Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- LT-26-062
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 68.24
- Grade Unit
- g/t
- Intercept
- 1.45 m
- True Width
- 1.45 m
- From
- 0 m
- To
- 1.45 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-062:0-1.45
- Mining Method
- open_pit
Location
- Easting
- 606600
- Northing
- 5270840
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“68.24”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-063Langis · silverGrade: 43.35Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-063
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 43.35
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.3 m
- From
- 0 m
- To
- 1.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-063:0-1.3
- Mining Method
- open_pit
Location
- Easting
- 606641
- Northing
- 5270837
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“43.35”
Context: 1.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-064Langis · silverGrade: 81.23Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-064
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 81.23
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.66 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-064:0-1.5
- Mining Method
- open_pit
Location
- Easting
- 606640
- Northing
- 5270877
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“81.23”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-064Langis · silverGrade: 128Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-064
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 128
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.5 m
- From
- 1 m
- To
- 1.5 m
- Hole Depth
- 3.66 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-064:1-1.5
- Mining Method
- open_pit
Location
- Easting
- 606640
- Northing
- 5270877
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: High-grade sub-interval from maiden tailings program shows high silver grade over a narrow width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“128.00”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-065Langis · silverGrade: 48.74Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-065
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.74
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-065:0-1.2
- Mining Method
- open_pit
Location
- Easting
- 606601
- Northing
- 5270881
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“48.74”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-066Langis · silverGrade: 48.8Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-066
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.8
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-066:0-1.5
- Mining Method
- open_pit
Location
- Easting
- 606561
- Northing
- 5270882
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“48.80”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-067Langis · silverGrade: 59.87Grade Unit: g/tIntercept: 1.83 mView all detailsHide details
Identity
- Hole ID
- LT-26-067
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.87
- Grade Unit
- g/t
- Intercept
- 1.83 m
- True Width
- 1.83 m
- From
- 0 m
- To
- 1.83 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-067:0-1.83
- Mining Method
- open_pit
Location
- Easting
- 606521
- Northing
- 5270884
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“59.87”
Context: 1.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.83
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-068Langis · silverGrade: 70.04Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- LT-26-068
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 70.04
- Grade Unit
- g/t
- Intercept
- 0.86 m
- True Width
- 0.86 m
- From
- 0 m
- To
- 0.86 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-068:0-0.86
- Mining Method
- open_pit
Location
- Easting
- 606480
- Northing
- 5270886
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“70.04”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-069Langis · silverGrade: 69.4Grade Unit: g/tIntercept: 0.58 mView all detailsHide details
Identity
- Hole ID
- LT-26-069
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 69.4
- Grade Unit
- g/t
- Intercept
- 0.58 m
- True Width
- 0.58 m
- From
- 0 m
- To
- 0.58 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-069:0-0.58
- Mining Method
- open_pit
Location
- Easting
- 606441
- Northing
- 5270886
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“69.40”
Context: 0.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.58
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-070Langis · silverGrade: 56.4Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LT-26-070
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 56.4
- Grade Unit
- g/t
- Intercept
- 0.6 m
- True Width
- 0.6 m
- From
- 0 m
- To
- 0.6 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-070:0-0.6
- Mining Method
- open_pit
Location
- Easting
- 606439
- Northing
- 5270926
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“56.40”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-071Langis · silverGrade: 59.56Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- LT-26-071
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.56
- Grade Unit
- g/t
- Intercept
- 0.88 m
- True Width
- 0.88 m
- From
- 0 m
- To
- 0.88 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-071:0-0.88
- Mining Method
- open_pit
Location
- Easting
- 606480
- Northing
- 5270924
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“59.56”
Context: 0.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-072Langis · silverGrade: 64.63Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- LT-26-072
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 64.63
- Grade Unit
- g/t
- Intercept
- 1.53 m
- True Width
- 1.53 m
- From
- 0 m
- To
- 1.53 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-072:0-1.53
- Mining Method
- open_pit
Location
- Easting
- 606521
- Northing
- 5270924
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“64.63”
Context: 1.53
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.53
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-073Langis · silverGrade: 56.75Grade Unit: g/tIntercept: 1.28 mView all detailsHide details
Identity
- Hole ID
- LT-26-073
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 56.75
- Grade Unit
- g/t
- Intercept
- 1.28 m
- True Width
- 1.28 m
- From
- 0 m
- To
- 1.28 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-073:0-1.28
- Mining Method
- open_pit
Location
- Easting
- 606562
- Northing
- 5270923
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“56.75”
Context: 1.28
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-074Langis · silverGrade: 47.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-074
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 47.3
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-074:0-1
- Mining Method
- open_pit
Location
- Easting
- 606603
- Northing
- 5270921
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“47.30”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-075Langis · silverGrade: 83.28Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-075
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 83.28
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.25 m
- From
- 0 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-075:0-1.25
- Mining Method
- open_pit
Location
- Easting
- 606644
- Northing
- 5270921
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“83.28”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-075Langis · silverGrade: 150Grade Unit: g/tIntercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-075
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 150
- Grade Unit
- g/t
- Intercept
- 0.25 m
- True Width
- 0.25 m
- From
- 1 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-075:1-1.25
- Mining Method
- open_pit
Location
- Easting
- 606644
- Northing
- 5270921
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: High-grade sub-interval from maiden tailings program shows high silver grade over a very narrow width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“150.00”
Context: 0.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-076Langis · silverGrade: 104.09Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-076
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 104.09
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-076:0-1.75
- Mining Method
- open_pit
Location
- Easting
- 606639
- Northing
- 5270960
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows high silver grade over a moderate width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“104.09”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-076Langis · silverGrade: 172Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-076
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 172
- Grade Unit
- g/t
- Intercept
- 0.75 m
- True Width
- 0.75 m
- From
- 1 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-076:1-1.75
- Mining Method
- open_pit
Location
- Easting
- 606639
- Northing
- 5270960
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Very high-grade sub-interval from maiden tailings program shows very high silver grade over a narrow width.
Positive factors
- Very high silver grade for tailings material.
- True width reported.
Evidence · table
“172.00”
Context: 0.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-077Langis · silverGrade: 66.66Grade Unit: g/tIntercept: 1.88 mView all detailsHide details
Identity
- Hole ID
- LT-26-077
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 66.66
- Grade Unit
- g/t
- Intercept
- 1.88 m
- True Width
- 1.88 m
- From
- 0 m
- To
- 1.88 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-077:0-1.88
- Mining Method
- open_pit
Location
- Easting
- 606600
- Northing
- 5270959
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“66.66”
Context: 1.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-078Langis · silverGrade: 62.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-078
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.4
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-078:0-1
- Mining Method
- open_pit
Location
- Easting
- 606559
- Northing
- 5270962
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“62.40”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-079Langis · silverGrade: 68.7Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- LT-26-079
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 68.7
- Grade Unit
- g/t
- Intercept
- 0.45 m
- True Width
- 0.45 m
- From
- 0 m
- To
- 0.45 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-079:0-0.45
- Mining Method
- open_pit
Location
- Easting
- 606517
- Northing
- 5270964
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a very narrow width.
Positive factors
- Strong silver grade for tailings material.
- True width reported.
Evidence · table
“68.70”
Context: 0.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-080Langis · silverGrade: 58.83Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-080
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 58.83
- Grade Unit
- g/t
- Intercept
- 0.75 m
- True Width
- 0.75 m
- From
- 0 m
- To
- 0.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-080:0-0.75
- Mining Method
- open_pit
Location
- Easting
- 606474
- Northing
- 5270971
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“58.83”
Context: 0.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-081Langis · silverGrade: 52.6Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-081
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.6
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-081:0-1.5
- Mining Method
- open_pit
Location
- Easting
- 606794
- Northing
- 5270821
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width.
Positive factors
- Consistent grade for tailings material.
- True width reported.
Evidence · table
“52.60”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-082Langis · silverGrade: 147Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-082
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 147
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-082:0-1.75
- Mining Method
- open_pit
Location
- Easting
- 606798
- Northing
- 5270836
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows high silver grade over a moderate width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“147.00”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-083Langis · silverGrade: 130Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-083
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 130
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.3 m
- From
- 0 m
- To
- 0.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-083:0-0.3
- Mining Method
- open_pit
Location
- Easting
- 606751
- Northing
- 5270853
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows high silver grade over a very narrow width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“130.00”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-084Langis · silverGrade: 148Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-084
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 148
- Grade Unit
- g/t
- Intercept
- 0.4 m
- True Width
- 0.4 m
- From
- 0 m
- To
- 0.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-084:0-0.4
- Mining Method
- open_pit
Location
- Easting
- 606775
- Northing
- 5270864
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows high silver grade over a very narrow width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“148.00”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-085Langis · silverGrade: 139Grade Unit: g/tIntercept: 0.09 mView all detailsHide details
Identity
- Hole ID
- LT-26-085
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 139
- Grade Unit
- g/t
- Intercept
- 0.09 m
- True Width
- 0.09 m
- From
- 0 m
- To
- 0.09 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LT-26-085:0-0.09
- Mining Method
- open_pit
Location
- Easting
- 606787
- Northing
- 5270851
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, umpire
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: Initial intercept from maiden tailings program shows high silver grade over a very narrow width.
Positive factors
- High silver grade for tailings material.
- True width reported.
Evidence · table
“139.00”
Context: 0.09
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.