# Brixton Metals Reports Consistent Silver Grades Across All 85 Holes from Maiden Tailings Drill Program at the Langis Silver Project Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90 Original source: https://www.globenewswire.com/news-release/2026/09/08/3357524/0/en/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden-tailings-drill-program-at-the-langis-silver-project.html Publisher: globenewswire Original announcement: 2026-09-08T00:00:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Brixton Metals Corporation - Ticker: BBB - Exchange: Unavailable - Region: Ontario, Canada - Primary commodity: Silver - Secondary commodities: None reported - Document categories: Drill results - Extracted: 2026-09-12 01:23:11 UTC Narrative sentiment: 0.80 · Bullish ## Minestarters Atlas summary Brixton Metals reported results from its maiden 85-hole sonic drill program at the Langis Silver Project tailings, with all holes returning silver mineralization. The program averaged 61.7 g/t silver on a length-weighted basis, including a high of 810 g/t silver over 0.50 m. The consistent grade profile supports the company's objective of defining a maiden Mineral Resource Estimate and advancing a recovery and remediation plan. Reasoning: Maiden drill program on tailings at the Langis Silver Project returned consistent silver grades across all 85 holes, with significant high-grade intercepts, supporting future resource estimation and potential reprocessing in a well-serviced mining district. - Positive factor: All 85 holes returned silver-mineralized tailings material, indicating widespread mineralization. - Positive factor: Consistent grade profile from hole to hole supports straightforward resource estimation. - Positive factor: High-grade intercepts up to 810 g/t silver were reported. - Positive factor: True thickness of mineralization was reported for all intervals. - Positive factor: Comprehensive QA/QC procedures were disclosed, including certified labs and umpire samples. - Positive factor: Project is located in a well-serviced mining district with existing infrastructure \(highway, rail, power\). - Positive factor: Potential for near-term cash flow from surface material \(tailings\) with simple excavation. - Negative factor: Results are from tailings material, which may present specific metallurgical challenges \(though test work is underway\). - Negative factor: No Mineral Resource Estimate has been defined yet. Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 89 ## Classification and evidence **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: The document states: 'Reported intervals represent the full mineralized tailings thickness intersected in each hole \(true thickness\).' Evidence · text > Reported intervals represent the full mineralized tailings thickness intersected in each hole \(true thickness\). **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details QA/QC procedures including certified lab \(ALS ISO 17025\), umpire samples \(Bureau Veritas\), and methods \(blanks, standards, pulp repeats\). Evidence · text > ALS is an ISO 17025 accredited laboratory. Rejects representing half of each sample are retained and composited for metallurgical test work, which is being conducted by SGS Canada Inc. \(“SGS”\). Umpire samples are submitted to Bureau Veritas Commodities Canada Ltd. \(“Bureau Veritas”\) for routine third-party verification. Brixton inserts independent certified reference material and blanks into the sample stream and assays routine pulp repeats at a rate of 15% as part of its quality assurance and quality control protocols. **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Hole LT-26-051 returned 0.50 m at 810.00 g/t silver, which is exceptionally high-grade for silver \(above 500 g/t exceptional threshold\). Evidence · table > 810.00 Context: 0.50 **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: The program comprised 85 sonic drill holes distributed across the mapped extent of the historic tailings on a nominal 40 m by 40 m grid, with the objective of defining a maiden Mineral Resource Estimate. Evidence · text > The 2026 program comprised 85 sonic drill holes distributed across the mapped extent of the historic tailings on a nominal 40 m by 40 m grid \(Figure 2\), with an average nearest-neighbour collar spacing of approximately 37 m. ## Extracted facts Stored fact records: 89. Some facts used in scoring do not have a stored record. ## Drill Results (89) ### LT-26-001 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-0) Langis · silver #### Identity - Hole ID: LT-26-001 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 49.13 - Grade Unit: g/t - Intercept: 3 m - True Width: 3 m - From: 0 m - To: 3 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-001:0-3 - Mining Method: open\_pit #### Location - Easting: 606527 - Northing: 5270639 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 49.13 Context: 3.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-002 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-1) Langis · silver #### Identity - Hole ID: LT-26-002 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 37.6 - Grade Unit: g/t - Intercept: 1.1 m - True Width: 1.1 m - From: 0 m - To: 1.1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-002:0-1.1 - Mining Method: open\_pit #### Location - Easting: 606487 - Northing: 5270646 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 192 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 37.60 Context: 1.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-003 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-2) Langis · silver #### Identity - Hole ID: LT-26-003 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 39.95 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 0 m - To: 1.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-003:0-1.2 - Mining Method: open\_pit #### Location - Easting: 606447 - Northing: 5270651 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 192 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 39.95 Context: 1.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-004 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-3) Langis · silver #### Identity - Hole ID: LT-26-004 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 38 - Grade Unit: g/t - Intercept: 0.4 m - True Width: 0.4 m - From: 0 m - To: 0.4 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-004:0-0.4 - Mining Method: open\_pit #### Location - Easting: 606407 - Northing: 5270653 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 191 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a very narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 38.00 Context: 0.40 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.4 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-005 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-4) Langis · silver #### Identity - Hole ID: LT-26-005 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 41.85 - Grade Unit: g/t - Intercept: 0.8 m - True Width: 0.8 m - From: 0 m - To: 0.8 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-005:0-0.8 - Mining Method: open\_pit #### Location - Easting: 606370 - Northing: 5270657 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 41.85 Context: 0.80 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-006 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-5) Langis · silver #### Identity - Hole ID: LT-26-006 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 46.9 - Grade Unit: g/t - Intercept: 0.2 m - True Width: 0.2 m - From: 0 m - To: 0.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-006:0-0.2 - Mining Method: open\_pit #### Location - Easting: 606356 - Northing: 5270619 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 191 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a very narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 46.90 Context: 0.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-007 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-6) Langis · silver #### Identity - Hole ID: LT-26-007 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 45.3 - Grade Unit: g/t - Intercept: 0.9 m - True Width: 0.9 m - From: 0 m - To: 0.9 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-007:0-0.9 - Mining Method: open\_pit #### Location - Easting: 606396 - Northing: 5270618 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 45.30 Context: 0.90 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-008 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-7) Langis · silver #### Identity - Hole ID: LT-26-008 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 48.24 - Grade Unit: g/t - Intercept: 1.9 m - True Width: 1.9 m - From: 0 m - To: 1.9 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-008:0-1.9 - Mining Method: open\_pit #### Location - Easting: 606436 - Northing: 5270613 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 196 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 48.24 Context: 1.90 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-009 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-8) Langis · silver #### Identity - Hole ID: LT-26-009 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 48.09 - Grade Unit: g/t - Intercept: 1.75 m - True Width: 1.75 m - From: 0 m - To: 1.75 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-009:0-1.75 - Mining Method: open\_pit #### Location - Easting: 606476 - Northing: 5270610 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 196 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 48.09 Context: 1.75 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.75 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-010 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-9) Langis · silver #### Identity - Hole ID: LT-26-010 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 79.53 - Grade Unit: g/t - Intercept: 2.25 m - True Width: 2.25 m - From: 0 m - To: 2.25 m - Hole Depth: 4.57 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-010:0-2.25 - Mining Method: open\_pit #### Location - Easting: 606520 - Northing: 5270604 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 197 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 79.53 Context: 2.25 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.25 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-10) Langis · silver #### Identity - Hole ID: LT-26-011 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 49.27 - Grade Unit: g/t - Intercept: 2.25 m - True Width: 2.25 m - From: 0 m - To: 2.25 m - Hole Depth: 2.44 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-011:0-2.25 - Mining Method: open\_pit #### Location - Easting: 606555 - Northing: 5270601 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 49.27 Context: 2.25 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.25 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-11) Langis · silver #### Identity - Hole ID: LT-26-012 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 51.69 - Grade Unit: g/t - Intercept: 2.8 m - True Width: 2.8 m - From: 0 m - To: 2.8 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-012:0-2.8 - Mining Method: open\_pit #### Location - Easting: 606567 - Northing: 5270563 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 51.69 Context: 2.80 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-12) Langis · silver #### Identity - Hole ID: LT-26-013 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 61.65 - Grade Unit: g/t - Intercept: 1.65 m - True Width: 1.65 m - From: 0 m - To: 1.65 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-013:0-1.65 - Mining Method: open\_pit #### Location - Easting: 606528 - Northing: 5270565 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 199 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 61.65 Context: 1.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.65 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-014 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-13) Langis · silver #### Identity - Hole ID: LT-26-014 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 58.94 - Grade Unit: g/t - Intercept: 2.4 m - True Width: 2.4 m - From: 0 m - To: 2.4 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-014:0-2.4 - Mining Method: open\_pit #### Location - Easting: 606487 - Northing: 5270567 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 58.94 Context: 2.40 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.4 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-015 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-14) Langis · silver #### Identity - Hole ID: LT-26-015 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 47.98 - Grade Unit: g/t - Intercept: 1.9 m - True Width: 1.9 m - From: 0 m - To: 1.9 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-015:0-1.9 - Mining Method: open\_pit #### Location - Easting: 606448 - Northing: 5270573 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 199 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 47.98 Context: 1.90 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-016 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-15) Langis · silver #### Identity - Hole ID: LT-26-016 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 50.31 - Grade Unit: g/t - Intercept: 1.8 m - True Width: 1.8 m - From: 0 m - To: 1.8 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-016:0-1.8 - Mining Method: open\_pit #### Location - Easting: 606407 - Northing: 5270575 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 198 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 50.31 Context: 1.80 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-017 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-16) Langis · silver #### Identity - Hole ID: LT-26-017 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 52.31 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 0 m - To: 1.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-017:0-1.2 - Mining Method: open\_pit #### Location - Easting: 606367 - Northing: 5270580 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 197 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 52.31 Context: 1.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-018 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-17) Langis · silver #### Identity - Hole ID: LT-26-018 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 53.76 - Grade Unit: g/t - Intercept: 1.25 m - True Width: 1.25 m - From: 0 m - To: 1.25 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-018:0-1.25 - Mining Method: open\_pit #### Location - Easting: 606366 - Northing: 5270541 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 197 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 53.76 Context: 1.25 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.25 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-019 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-18) Langis · silver #### Identity - Hole ID: LT-26-019 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 49.73 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 0 m - To: 1.5 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-019:0-1.5 - Mining Method: open\_pit #### Location - Easting: 606407 - Northing: 5270538 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 198 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 49.73 Context: 1.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-020 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-19) Langis · silver #### Identity - Hole ID: LT-26-020 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 50.99 - Grade Unit: g/t - Intercept: 2.7 m - True Width: 2.7 m - From: 0 m - To: 2.7 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-020:0-2.7 - Mining Method: open\_pit #### Location - Easting: 606449 - Northing: 5270535 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 50.99 Context: 2.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-021 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-20) Langis · silver #### Identity - Hole ID: LT-26-021 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 53.72 - Grade Unit: g/t - Intercept: 2.65 m - True Width: 2.65 m - From: 0 m - To: 2.65 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-021:0-2.65 - Mining Method: open\_pit #### Location - Easting: 606488 - Northing: 5270533 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 53.72 Context: 2.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.65 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-022 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-21) Langis · silver #### Identity - Hole ID: LT-26-022 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 55.79 - Grade Unit: g/t - Intercept: 3.7 m - True Width: 3.7 m - From: 0 m - To: 3.7 m - Hole Depth: 4.57 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-022:0-3.7 - Mining Method: open\_pit #### Location - Easting: 606527 - Northing: 5270528 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a good width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 55.79 Context: 3.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-023 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-22) Langis · silver #### Identity - Hole ID: LT-26-023 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 66.24 - Grade Unit: g/t - Intercept: 2.3 m - True Width: 2.3 m - From: 0 m - To: 2.3 m - Hole Depth: 4.57 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-023:0-2.3 - Mining Method: open\_pit #### Location - Easting: 606568 - Northing: 5270527 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 66.24 Context: 2.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-024 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-23) Langis · silver #### Identity - Hole ID: LT-26-024 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 50.82 - Grade Unit: g/t - Intercept: 2.45 m - True Width: 2.45 m - From: 0 m - To: 2.45 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-024:0-2.45 - Mining Method: open\_pit #### Location - Easting: 606554 - Northing: 5270500 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 50.82 Context: 2.45 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.45 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-025 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-24) Langis · silver #### Identity - Hole ID: LT-26-025 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 50.1 - Grade Unit: g/t - Intercept: 3.55 m - True Width: 3.55 m - From: 0 m - To: 3.55 m - Hole Depth: 4.57 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-025:0-3.55 - Mining Method: open\_pit #### Location - Easting: 606521 - Northing: 5270503 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a good width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 50.10 Context: 3.55 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.55 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-026 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-25) Langis · silver #### Identity - Hole ID: LT-26-026 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 46.58 - Grade Unit: g/t - Intercept: 2.58 m - True Width: 2.58 m - From: 0 m - To: 2.58 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-026:0-2.58 - Mining Method: open\_pit #### Location - Easting: 606488 - Northing: 5270494 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 203 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 46.58 Context: 2.58 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.58 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-027 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-26) Langis · silver #### Identity - Hole ID: LT-26-027 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 55.39 - Grade Unit: g/t - Intercept: 2.3 m - True Width: 2.3 m - From: 0 m - To: 2.3 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-027:0-2.3 - Mining Method: open\_pit #### Location - Easting: 606451 - Northing: 5270501 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 203 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 55.39 Context: 2.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-028 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-27) Langis · silver #### Identity - Hole ID: LT-26-028 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 45.54 - Grade Unit: g/t - Intercept: 1.3 m - True Width: 1.3 m - From: 0 m - To: 1.3 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-028:0-1.3 - Mining Method: open\_pit #### Location - Easting: 606409 - Northing: 5270503 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 45.54 Context: 1.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-029 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-28) Langis · silver #### Identity - Hole ID: LT-26-029 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 46.8 - Grade Unit: g/t - Intercept: 0.9 m - True Width: 0.9 m - From: 0 m - To: 0.9 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-029:0-0.9 - Mining Method: open\_pit #### Location - Easting: 606370 - Northing: 5270494 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 46.80 Context: 0.90 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-030 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-29) Langis · silver #### Identity - Hole ID: LT-26-030 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 42.27 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-030:0-1 - Mining Method: open\_pit #### Location - Easting: 606373 - Northing: 5270457 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 203 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 42.27 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-031 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-30) Langis · silver #### Identity - Hole ID: LT-26-031 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 50.23 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 0 m - To: 1.5 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-031:0-1.5 - Mining Method: open\_pit #### Location - Easting: 606415 - Northing: 5270464 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 205 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 50.23 Context: 1.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-032 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-31) Langis · silver #### Identity - Hole ID: LT-26-032 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 55.98 - Grade Unit: g/t - Intercept: 2 m - True Width: 2 m - From: 0 m - To: 2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-032:0-2 - Mining Method: open\_pit #### Location - Easting: 606457 - Northing: 5270468 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 206 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 55.98 Context: 2.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-033 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-32) Langis · silver #### Identity - Hole ID: LT-26-033 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 51.36 - Grade Unit: g/t - Intercept: 2.35 m - True Width: 2.35 m - From: 0 m - To: 2.35 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-033:0-2.35 - Mining Method: open\_pit #### Location - Easting: 606497 - Northing: 5270461 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 206 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 51.36 Context: 2.35 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.35 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-034 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-33) Langis · silver #### Identity - Hole ID: LT-26-034 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 51.1 - Grade Unit: g/t - Intercept: 1.65 m - True Width: 1.65 m - From: 0 m - To: 1.65 m - Hole Depth: 2.13 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-034:0-1.65 - Mining Method: open\_pit #### Location - Easting: 606531 - Northing: 5270447 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 205 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 51.10 Context: 1.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.65 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-035 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-34) Langis · silver #### Identity - Hole ID: LT-26-035 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 44.96 - Grade Unit: g/t - Intercept: 1.25 m - True Width: 1.25 m - From: 0 m - To: 1.25 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-035:0-1.25 - Mining Method: open\_pit #### Location - Easting: 606503 - Northing: 5270421 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 44.96 Context: 1.25 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.25 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-036 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-35) Langis · silver #### Identity - Hole ID: LT-26-036 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 52.75 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-036:0-1 - Mining Method: open\_pit #### Location - Easting: 606462 - Northing: 5270417 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 52.75 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-037 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-36) Langis · silver #### Identity - Hole ID: LT-26-037 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 65.64 - Grade Unit: g/t - Intercept: 0.9 m - True Width: 0.9 m - From: 0 m - To: 0.9 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-037:0-0.9 - Mining Method: open\_pit #### Location - Easting: 606420 - Northing: 5270415 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 204 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 65.64 Context: 0.90 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-038 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-37) Langis · silver #### Identity - Hole ID: LT-26-038 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 59.06 - Grade Unit: g/t - Intercept: 0.93 m - True Width: 0.93 m - From: 0 m - To: 0.93 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-038:0-0.93 - Mining Method: open\_pit #### Location - Easting: 606382 - Northing: 5270417 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 59.06 Context: 0.93 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.93 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-039 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-38) Langis · silver #### Identity - Hole ID: LT-26-039 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 59.7 - Grade Unit: g/t - Intercept: 0.6 m - True Width: 0.6 m - From: 0 m - To: 0.6 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-039:0-0.6 - Mining Method: open\_pit #### Location - Easting: 606397 - Northing: 5270378 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 59.70 Context: 0.60 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.6 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-040 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-39) Langis · silver #### Identity - Hole ID: LT-26-040 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 53.05 - Grade Unit: g/t - Intercept: 0.8 m - True Width: 0.8 m - From: 0 m - To: 0.8 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-040:0-0.8 - Mining Method: open\_pit #### Location - Easting: 606441 - Northing: 5270382 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 53.05 Context: 0.80 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-041 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-40) Langis · silver #### Identity - Hole ID: LT-26-041 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 69.95 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-041:0-1 - Mining Method: open\_pit #### Location - Easting: 606564 - Northing: 5270721 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 197 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 69.95 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-042 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-41) Langis · silver #### Identity - Hole ID: LT-26-042 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 52.76 - Grade Unit: g/t - Intercept: 1.16 m - True Width: 1.16 m - From: 0 m - To: 1.16 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-042:0-1.16 - Mining Method: open\_pit #### Location - Easting: 606527 - Northing: 5270720 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 195 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 52.76 Context: 1.16 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.16 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-043 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-42) Langis · silver #### Identity - Hole ID: LT-26-043 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 66.56 - Grade Unit: g/t - Intercept: 1.02 m - True Width: 1.02 m - From: 0 m - To: 1.02 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-043:0-1.02 - Mining Method: open\_pit #### Location - Easting: 606488 - Northing: 5270720 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 194 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 66.56 Context: 1.02 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.02 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-044 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-43) Langis · silver #### Identity - Hole ID: LT-26-044 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 71.24 - Grade Unit: g/t - Intercept: 0.86 m - True Width: 0.86 m - From: 0 m - To: 0.86 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-044:0-0.86 - Mining Method: open\_pit #### Location - Easting: 606449 - Northing: 5270716 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 192 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 71.24 Context: 0.86 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.86 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-045 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-44) Langis · silver #### Identity - Hole ID: LT-26-045 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 77.4 - Grade Unit: g/t - Intercept: 0.16 m - True Width: 0.16 m - From: 0 m - To: 0.16 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-045:0-0.16 - Mining Method: open\_pit #### Location - Easting: 606406 - Northing: 5270717 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 192 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a very narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 77.40 Context: 0.16 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.16 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-046 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-45) Langis · silver #### Identity - Hole ID: LT-26-046 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 85.3 - Grade Unit: g/t - Intercept: 0.53 m - True Width: 0.53 m - From: 0 m - To: 0.53 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-046:0-0.53 - Mining Method: open\_pit #### Location - Easting: 606403 - Northing: 5270757 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 85.30 Context: 0.53 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.53 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-047 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-46) Langis · silver #### Identity - Hole ID: LT-26-047 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 70.35 - Grade Unit: g/t - Intercept: 0.92 m - True Width: 0.92 m - From: 0 m - To: 0.92 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-047:0-0.92 - Mining Method: open\_pit #### Location - Easting: 606444 - Northing: 5270757 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 194 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 70.35 Context: 0.92 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.92 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-048 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-47) Langis · silver #### Identity - Hole ID: LT-26-048 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 63.41 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 0 m - To: 1.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-048:0-1.2 - Mining Method: open\_pit #### Location - Easting: 606485 - Northing: 5270759 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 194 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 63.41 Context: 1.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-049 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-48) Langis · silver #### Identity - Hole ID: LT-26-049 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 44.75 - Grade Unit: g/t - Intercept: 1.4 m - True Width: 1.4 m - From: 0 m - To: 1.4 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-049:0-1.4 - Mining Method: open\_pit #### Location - Easting: 606526 - Northing: 5270760 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 196 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 44.75 Context: 1.40 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.4 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-050 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-49) Langis · silver #### Identity - Hole ID: LT-26-050 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 56.04 - Grade Unit: g/t - Intercept: 1.75 m - True Width: 1.75 m - From: 0 m - To: 1.75 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-050:0-1.75 - Mining Method: open\_pit #### Location - Easting: 606564 - Northing: 5270760 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 196 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 56.04 Context: 1.75 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.75 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-051 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-50) Langis · silver #### Identity - Hole ID: LT-26-051 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 311.66 - Grade Unit: g/t - Intercept: 1.53 m - True Width: 1.53 m - From: 0 m - To: 1.53 m - Hole Depth: 2.13 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-051:0-1.53 - Mining Method: open\_pit #### Location - Easting: 606603 - Northing: 5270759 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 198 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Highest-grade intercept from maiden tailings program shows exceptional silver grade over a moderate width. - Positive factor: Exceptional silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 311.66 Context: 1.53 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.53 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-051 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-51) Langis · silver #### Identity - Hole ID: LT-26-051 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 810 - Grade Unit: g/t - Intercept: 0.5 m - True Width: 0.5 m - From: 0 m - To: 0.5 m - Hole Depth: 2.13 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-051:0-0.5 - Mining Method: open\_pit #### Location - Easting: 606603 - Northing: 5270759 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 198 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Bonanza-grade sub-interval from maiden tailings program shows extremely high silver grade over a narrow width. - Positive factor: Bonanza silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 810.00 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-052 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-52) Langis · silver #### Identity - Hole ID: LT-26-052 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 62.57 - Grade Unit: g/t - Intercept: 0.91 m - True Width: 0.91 m - From: 0 m - To: 0.91 m - Hole Depth: 0.91 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-052:0-0.91 - Mining Method: open\_pit #### Location - Easting: 606631 - Northing: 5270797 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 62.57 Context: 0.91 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.91 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-053 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-53) Langis · silver #### Identity - Hole ID: LT-26-053 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 62.31 - Grade Unit: g/t - Intercept: 2.2 m - True Width: 2.2 m - From: 0 m - To: 2.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-053:0-2.2 - Mining Method: open\_pit #### Location - Easting: 606595 - Northing: 5270802 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 62.31 Context: 2.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-054 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-54) Langis · silver #### Identity - Hole ID: LT-26-054 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 45.73 - Grade Unit: g/t - Intercept: 1.54 m - True Width: 1.54 m - From: 0 m - To: 1.54 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-054:0-1.54 - Mining Method: open\_pit #### Location - Easting: 606555 - Northing: 5270803 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 45.73 Context: 1.54 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.54 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-055 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-55) Langis · silver #### Identity - Hole ID: LT-26-055 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 51.97 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 0 m - To: 1.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-055:0-1.2 - Mining Method: open\_pit #### Location - Easting: 606515 - Northing: 5270804 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 51.97 Context: 1.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-056 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-56) Langis · silver #### Identity - Hole ID: LT-26-056 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 62.36 - Grade Unit: g/t - Intercept: 0.8 m - True Width: 0.8 m - From: 0 m - To: 0.8 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-056:0-0.8 - Mining Method: open\_pit #### Location - Easting: 606476 - Northing: 5270804 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 62.36 Context: 0.80 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-057 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-57) Langis · silver #### Identity - Hole ID: LT-26-057 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 70.32 - Grade Unit: g/t - Intercept: 0.65 m - True Width: 0.65 m - From: 0 m - To: 0.65 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-057:0-0.65 - Mining Method: open\_pit #### Location - Easting: 606436 - Northing: 5270806 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 70.32 Context: 0.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.65 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-058 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-58) Langis · silver #### Identity - Hole ID: LT-26-058 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 68.05 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-058:0-1 - Mining Method: open\_pit #### Location - Easting: 606439 - Northing: 5270846 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 68.05 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-059 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-59) Langis · silver #### Identity - Hole ID: LT-26-059 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 74.8 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-059:0-1 - Mining Method: open\_pit #### Location - Easting: 606479 - Northing: 5270846 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 74.80 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-060 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-60) Langis · silver #### Identity - Hole ID: LT-26-060 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 67.42 - Grade Unit: g/t - Intercept: 2 m - True Width: 2 m - From: 0 m - To: 2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-060:0-2 - Mining Method: open\_pit #### Location - Easting: 606520 - Northing: 5270844 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 67.42 Context: 2.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-061 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-61) Langis · silver #### Identity - Hole ID: LT-26-061 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 41.79 - Grade Unit: g/t - Intercept: 1.35 m - True Width: 1.35 m - From: 0 m - To: 1.35 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-061:0-1.35 - Mining Method: open\_pit #### Location - Easting: 606560 - Northing: 5270842 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 41.79 Context: 1.35 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.35 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-062 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-62) Langis · silver #### Identity - Hole ID: LT-26-062 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 68.24 - Grade Unit: g/t - Intercept: 1.45 m - True Width: 1.45 m - From: 0 m - To: 1.45 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-062:0-1.45 - Mining Method: open\_pit #### Location - Easting: 606600 - Northing: 5270840 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 68.24 Context: 1.45 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.45 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-063 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-63) Langis · silver #### Identity - Hole ID: LT-26-063 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 43.35 - Grade Unit: g/t - Intercept: 1.3 m - True Width: 1.3 m - From: 0 m - To: 1.3 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-063:0-1.3 - Mining Method: open\_pit #### Location - Easting: 606641 - Northing: 5270837 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 43.35 Context: 1.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-064 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-64) Langis · silver #### Identity - Hole ID: LT-26-064 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 81.23 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 0 m - To: 1.5 m - Hole Depth: 3.66 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-064:0-1.5 - Mining Method: open\_pit #### Location - Easting: 606640 - Northing: 5270877 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 81.23 Context: 1.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-064 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-65) Langis · silver #### Identity - Hole ID: LT-26-064 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 128 - Grade Unit: g/t - Intercept: 0.5 m - True Width: 0.5 m - From: 1 m - To: 1.5 m - Hole Depth: 3.66 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-064:1-1.5 - Mining Method: open\_pit #### Location - Easting: 606640 - Northing: 5270877 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: High-grade sub-interval from maiden tailings program shows high silver grade over a narrow width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 128.00 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-065 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-66) Langis · silver #### Identity - Hole ID: LT-26-065 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 48.74 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 0 m - To: 1.2 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-065:0-1.2 - Mining Method: open\_pit #### Location - Easting: 606601 - Northing: 5270881 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 48.74 Context: 1.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-066 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-67) Langis · silver #### Identity - Hole ID: LT-26-066 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 48.8 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 0 m - To: 1.5 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-066:0-1.5 - Mining Method: open\_pit #### Location - Easting: 606561 - Northing: 5270882 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 48.80 Context: 1.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-067 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-68) Langis · silver #### Identity - Hole ID: LT-26-067 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 59.87 - Grade Unit: g/t - Intercept: 1.83 m - True Width: 1.83 m - From: 0 m - To: 1.83 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-067:0-1.83 - Mining Method: open\_pit #### Location - Easting: 606521 - Northing: 5270884 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 59.87 Context: 1.83 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.83 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-068 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-69) Langis · silver #### Identity - Hole ID: LT-26-068 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 70.04 - Grade Unit: g/t - Intercept: 0.86 m - True Width: 0.86 m - From: 0 m - To: 0.86 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-068:0-0.86 - Mining Method: open\_pit #### Location - Easting: 606480 - Northing: 5270886 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 70.04 Context: 0.86 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.86 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-069 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-70) Langis · silver #### Identity - Hole ID: LT-26-069 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 69.4 - Grade Unit: g/t - Intercept: 0.58 m - True Width: 0.58 m - From: 0 m - To: 0.58 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-069:0-0.58 - Mining Method: open\_pit #### Location - Easting: 606441 - Northing: 5270886 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 69.40 Context: 0.58 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.58 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-070 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-71) Langis · silver #### Identity - Hole ID: LT-26-070 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 56.4 - Grade Unit: g/t - Intercept: 0.6 m - True Width: 0.6 m - From: 0 m - To: 0.6 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-070:0-0.6 - Mining Method: open\_pit #### Location - Easting: 606439 - Northing: 5270926 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 56.40 Context: 0.60 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.6 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-071 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-72) Langis · silver #### Identity - Hole ID: LT-26-071 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 59.56 - Grade Unit: g/t - Intercept: 0.88 m - True Width: 0.88 m - From: 0 m - To: 0.88 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-071:0-0.88 - Mining Method: open\_pit #### Location - Easting: 606480 - Northing: 5270924 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 59.56 Context: 0.88 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.88 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-072 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-73) Langis · silver #### Identity - Hole ID: LT-26-072 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 64.63 - Grade Unit: g/t - Intercept: 1.53 m - True Width: 1.53 m - From: 0 m - To: 1.53 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-072:0-1.53 - Mining Method: open\_pit #### Location - Easting: 606521 - Northing: 5270924 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 64.63 Context: 1.53 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.53 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-073 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-74) Langis · silver #### Identity - Hole ID: LT-26-073 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 56.75 - Grade Unit: g/t - Intercept: 1.28 m - True Width: 1.28 m - From: 0 m - To: 1.28 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-073:0-1.28 - Mining Method: open\_pit #### Location - Easting: 606562 - Northing: 5270923 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 201 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 56.75 Context: 1.28 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-074 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-75) Langis · silver #### Identity - Hole ID: LT-26-074 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 47.3 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-074:0-1 - Mining Method: open\_pit #### Location - Easting: 606603 - Northing: 5270921 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 47.30 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-075 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-76) Langis · silver #### Identity - Hole ID: LT-26-075 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 83.28 - Grade Unit: g/t - Intercept: 1.25 m - True Width: 1.25 m - From: 0 m - To: 1.25 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-075:0-1.25 - Mining Method: open\_pit #### Location - Easting: 606644 - Northing: 5270921 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 83.28 Context: 1.25 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.25 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-075 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-77) Langis · silver #### Identity - Hole ID: LT-26-075 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 150 - Grade Unit: g/t - Intercept: 0.25 m - True Width: 0.25 m - From: 1 m - To: 1.25 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-075:1-1.25 - Mining Method: open\_pit #### Location - Easting: 606644 - Northing: 5270921 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 200 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: High-grade sub-interval from maiden tailings program shows high silver grade over a very narrow width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 150.00 Context: 0.25 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.25 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-076 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-78) Langis · silver #### Identity - Hole ID: LT-26-076 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 104.09 - Grade Unit: g/t - Intercept: 1.75 m - True Width: 1.75 m - From: 0 m - To: 1.75 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-076:0-1.75 - Mining Method: open\_pit #### Location - Easting: 606639 - Northing: 5270960 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 194 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows high silver grade over a moderate width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 104.09 Context: 1.75 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.75 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-076 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-79) Langis · silver #### Identity - Hole ID: LT-26-076 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 172 - Grade Unit: g/t - Intercept: 0.75 m - True Width: 0.75 m - From: 1 m - To: 1.75 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-076:1-1.75 - Mining Method: open\_pit #### Location - Easting: 606639 - Northing: 5270960 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 194 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Very high-grade sub-interval from maiden tailings program shows very high silver grade over a narrow width. - Positive factor: Very high silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 172.00 Context: 0.75 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.75 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-077 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-80) Langis · silver #### Identity - Hole ID: LT-26-077 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 66.66 - Grade Unit: g/t - Intercept: 1.88 m - True Width: 1.88 m - From: 0 m - To: 1.88 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-077:0-1.88 - Mining Method: open\_pit #### Location - Easting: 606600 - Northing: 5270959 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a moderate width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 66.66 Context: 1.88 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.88 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-078 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-81) Langis · silver #### Identity - Hole ID: LT-26-078 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 62.4 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 0 m - To: 1 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-078:0-1 - Mining Method: open\_pit #### Location - Easting: 606559 - Northing: 5270962 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 62.40 Context: 1.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-079 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-82) Langis · silver #### Identity - Hole ID: LT-26-079 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 68.7 - Grade Unit: g/t - Intercept: 0.45 m - True Width: 0.45 m - From: 0 m - To: 0.45 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-079:0-0.45 - Mining Method: open\_pit #### Location - Easting: 606517 - Northing: 5270964 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 193 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows strong silver grade over a very narrow width. - Positive factor: Strong silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 68.70 Context: 0.45 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.45 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-080 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-83) Langis · silver #### Identity - Hole ID: LT-26-080 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 58.83 - Grade Unit: g/t - Intercept: 0.75 m - True Width: 0.75 m - From: 0 m - To: 0.75 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-080:0-0.75 - Mining Method: open\_pit #### Location - Easting: 606474 - Northing: 5270971 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 192 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a narrow width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 58.83 Context: 0.75 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.75 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-081 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-84) Langis · silver #### Identity - Hole ID: LT-26-081 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 52.6 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 0 m - To: 1.5 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-081:0-1.5 - Mining Method: open\_pit #### Location - Easting: 606794 - Northing: 5270821 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 199 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows consistent silver grade over a moderate width. - Positive factor: Consistent grade for tailings material. - Positive factor: True width reported. Evidence · table > 52.60 Context: 1.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-082 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-85) Langis · silver #### Identity - Hole ID: LT-26-082 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 147 - Grade Unit: g/t - Intercept: 1.75 m - True Width: 1.75 m - From: 0 m - To: 1.75 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-082:0-1.75 - Mining Method: open\_pit #### Location - Easting: 606798 - Northing: 5270836 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 202 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows high silver grade over a moderate width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 147.00 Context: 1.75 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.75 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-083 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-86) Langis · silver #### Identity - Hole ID: LT-26-083 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 130 - Grade Unit: g/t - Intercept: 0.3 m - True Width: 0.3 m - From: 0 m - To: 0.3 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-083:0-0.3 - Mining Method: open\_pit #### Location - Easting: 606751 - Northing: 5270853 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 194 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows high silver grade over a very narrow width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 130.00 Context: 0.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-084 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-87) Langis · silver #### Identity - Hole ID: LT-26-084 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 148 - Grade Unit: g/t - Intercept: 0.4 m - True Width: 0.4 m - From: 0 m - To: 0.4 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-084:0-0.4 - Mining Method: open\_pit #### Location - Easting: 606775 - Northing: 5270864 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 199 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows high silver grade over a very narrow width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 148.00 Context: 0.40 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.4 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ### LT-26-085 [Link to this fact](https://atlas-extractions.minestarters.com/news/brixton-metals-reports-consistent-silver-grades-across-all-85-holes-from-maiden--e4b6096a-216f-4fca-8660-c5e742ad4b90#fact-drill-facts-88) Langis · silver #### Identity - Hole ID: LT-26-085 - Project: Langis - Commodity: silver - Region: canada\_on - Reported Region: canada\_on - Ticker: BBB #### Geometry - Grade: 139 - Grade Unit: g/t - Intercept: 0.09 m - True Width: 0.09 m - From: 0 m - To: 0.09 m - Hole Depth: 3.05 m - Intercept Depth: 0 m #### Classification - Program: resource - Sample Type: drill - Group ID: LT-26-085:0-0.09 - Mining Method: open\_pit #### Location - Easting: 606787 - Northing: 5270851 - CRS: NAD83 UTM Zone 17N - EPSG: 26917 - Elevation: 199 m - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Laboratories Inc. - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, umpire #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-08T00:00:00.000Z Reasoning: Initial intercept from maiden tailings program shows high silver grade over a very narrow width. - Positive factor: High silver grade for tailings material. - Positive factor: True width reported. Evidence · table > 139.00 Context: 0.09 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.09 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1\_8Sept2026.png https://brixtonmetals.com/wp-content/" ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.