Bullion Gold lance des programmes d'exploration de surface aux projets BODO et Langlade
Original announcement by newsfile on
- Company
- Bullion Gold Discoveries Corp.
- Ticker
- BGD
- Exchange
- Unavailable
- Region
- Quebec
- Primary commodity
- Copper
- Secondary commodities
- Zinc, Gold, Silver, Cobalt
- Document categories
- Drill results, Other
- Extracted
- 2026-09-16 11:20:30 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Bullion Gold Discoveries Corp. has launched surface exploration programs at its BODO and Langlade projects in Quebec. The company reported drill results from the Langlade project, with notable intercepts including 4.0 m at 0.60% Cu, 1.10% Zn, 0.06 g/t Au, and 14.35 g/t Ag (1.22% CuEq) in hole LAN-26-29, and 0.5 m at 0.81% Cu, 0.75% Zn, 0.56 g/t Au, and 36.10 g/t Ag (2.32% CuEq) in hole LAN-26-30. Additionally, high-grade surface samples were collected from the BODO project, with one sample returning 15.20% Cu, 2.53 g/t Au, 137.00 g/t Ag, and 577 ppm Co.
Reasoning: Bullion Gold Discoveries Corp. announced new drill results from its Langlade project, revealing several significant polymetallic intercepts, including high-grade sub-intervals. Concurrently, high-grade surface samples were reported from the BODO project. The company provided detailed QA/QC disclosure and a Qualified Person's sign-off, enhancing confidence. However, some drill holes were barren, and the true width of intercepts is an estimate, which introduces some uncertainty.
Positive factors
- Significant drill intercepts with high-grade sub-intervals reported from Langlade project
- High-grade polymetallic surface samples from BODO project
- QA/QC procedures disclosed, including use of AGAT laboratories and insertion of blanks, standards, and duplicates
- Technical information approved by a Qualified Person (QP)
- Metal equivalent assumptions are transparently disclosed
Negative factors
- Some drill holes returned no significant assay results
- True width of drill intercepts is an estimate, not precisely measured
- Surface samples inherently carry lower confidence than drill results
Facts used in scoring: 112
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including the use of AGAT laboratories, pyroanalysis, ICP-OES, and insertion of duplicates, standards, and blanks.
Evidence · text
“Les carottes ont été coupées en deux, et l'une des moitiés a été envoyée aux laboratoires AGAT, à Val-d'Or, pour analyse. L'or a été analysé par pyroanalyse (50 g) avec finition par absorption atomique, tandis que les métaux de base ont été analysés par digestion à quatre acides avec finition ICP-OES. ... Des duplicatas de préparation d'échantillons, des étalons de référence certifiés et des blancs sont insérés dans le flux d'échantillons.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mme Suzie Tremblay, a member of the Ordre des géologues du Québec, is named as the Qualified Person responsible for reviewing and approving the technical information.
Evidence · text
“L'information scientifique et technique divulguée dans ce communiqué a été examinée et approuvée par Mme Suzie Tremblay, membre en exercice de l'Ordre des géologues du Québec (OGQ n° 10664), qui est une « personne qualifiée » au sens du Règlement 43-101 sur l'information concernant les projets miniers.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drill program at Langlade aimed for a potential extension of mineralization.
Evidence · text
“Le programme visait un secteur prometteur pour une extension potentielle de la minéralisation.”
True Width Estimatedneutral · Story-specific tag
No canonical definition is currently available.
Why it applies: The document states that true width is estimated at 80-85% of core length, rather than precisely measured or calculated.
Evidence · table
“L'épaisseur vraie est estimée à environ 80-85 % de la longueur des carottes, en fonction des angles de déviation.”
Context: Les largeurs indiquées correspondent à la longueur des carottes.
Extracted facts
Stored fact records: 112. Some facts used in scoring do not have a stored record.
Drill Results (112)
LAN-26-29Langlade · copperGrade: 0.21Grade Unit: %Intercept: 37.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 37.9 m
- True Width
- 31.2675 m
- From
- 107.6 m
- To
- 145.5 m
- Intercept Depth
- 107.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:107.6-145.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows moderate copper equivalent grades over a significant length, but the individual copper grade is below the weak threshold for VMS deposits.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Strong intercept length
- True width estimated
Negative factors
- Copper grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,21”
Context: 37,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.2675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · zincGrade: 0.22Grade Unit: %Intercept: 37.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 37.9 m
- True Width
- 31.2675 m
- From
- 107.6 m
- To
- 145.5 m
- Intercept Depth
- 107.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:107.6-145.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a zinc grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,22”
Context: 37,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.2675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · goldGrade: 0.05Grade Unit: g/tIntercept: 37.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 37.9 m
- True Width
- 31.2675 m
- From
- 107.6 m
- To
- 145.5 m
- Intercept Depth
- 107.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:107.6-145.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a gold grade below the weak threshold, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,05”
Context: 37,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.2675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · silverGrade: 7.38Grade Unit: g/tIntercept: 37.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 7.38
- Grade Unit
- g/t
- Intercept
- 37.9 m
- True Width
- 31.2675 m
- From
- 107.6 m
- To
- 145.5 m
- Intercept Depth
- 107.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:107.6-145.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a silver grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“7,38”
Context: 37,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.2675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · copperGrade: 0.6Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 4 m
- True Width
- 3.3 m
- From
- 114 m
- To
- 118 m
- Intercept Depth
- 114 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:114-118
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grades and moderate copper grades over a narrow width, indicating a higher-grade zone within the broader intercept.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,60”
Context: 4,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.3
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · zincGrade: 1.1Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 1.1
- Grade Unit
- %
- Intercept
- 4 m
- True Width
- 3.3 m
- From
- 114 m
- To
- 118 m
- Intercept Depth
- 114 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:114-118
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This sub-interval shows a zinc grade below the weak threshold for VMS deposits over a narrow width.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“1,10”
Context: 4,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.3
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · goldGrade: 0.06Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 4 m
- True Width
- 3.3 m
- From
- 114 m
- To
- 118 m
- Intercept Depth
- 114 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:114-118
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This sub-interval shows a gold grade below the weak threshold over a narrow width.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,06”
Context: 4,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.3
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · silverGrade: 14.35Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 14.35
- Grade Unit
- g/t
- Intercept
- 4 m
- True Width
- 3.3 m
- From
- 114 m
- To
- 118 m
- Intercept Depth
- 114 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:114-118
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This sub-interval shows a silver grade below the weak threshold for VMS deposits over a narrow width.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“14,35”
Context: 4,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.3
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · copperGrade: 0.75Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 120 m
- To
- 121 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:120-121
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and moderate copper grades, indicating a high-grade veinlet.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,75”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · zincGrade: 0.22Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 120 m
- To
- 121 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:120-121
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,22”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · goldGrade: 0.05Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 120 m
- To
- 121 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:120-121
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,05”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · silverGrade: 17.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 17.6
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 120 m
- To
- 121 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:120-121
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“17,60”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · copperGrade: 0.72Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.72
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 122 m
- To
- 123 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:122-123
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and moderate copper grades, indicating a high-grade veinlet.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,72”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · zincGrade: 0.14Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 122 m
- To
- 123 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:122-123
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,14”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 122 m
- To
- 123 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:122-123
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,01”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · silverGrade: 24.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 24.6
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 122 m
- To
- 123 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:122-123
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“24,60”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · copperGrade: 0.96Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.96
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 136 m
- To
- 136.5 m
- Intercept Depth
- 136 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:136-136.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and moderate copper grades, indicating a high-grade veinlet.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,96”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · zincGrade: 0.09Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 136 m
- To
- 136.5 m
- Intercept Depth
- 136 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:136-136.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,09”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · goldGrade: 0.12Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 136 m
- To
- 136.5 m
- Intercept Depth
- 136 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:136-136.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,12”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · silverGrade: 14.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 14.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 136 m
- To
- 136.5 m
- Intercept Depth
- 136 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:136-136.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“14,80”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · copperGrade: 0.18Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 3 m
- True Width
- 2.475 m
- From
- 139.5 m
- To
- 142.5 m
- Intercept Depth
- 139.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:139.5-142.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows moderate copper equivalent grades, but individual metal grades are low.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- True width estimated
Negative factors
- Copper grade is below weak for VMS deposit type
- Zinc, gold, and silver grades are weak or below weak
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,18”
Context: 3,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · zincGrade: 0.08Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 3 m
- True Width
- 2.475 m
- From
- 139.5 m
- To
- 142.5 m
- Intercept Depth
- 139.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:139.5-142.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,08”
Context: 3,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · goldGrade: 0.14Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 2.475 m
- From
- 139.5 m
- To
- 142.5 m
- Intercept Depth
- 139.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:139.5-142.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,14”
Context: 3,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-29Langlade · silverGrade: 24.55Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LAN-26-29
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 24.55
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 2.475 m
- From
- 139.5 m
- To
- 142.5 m
- Intercept Depth
- 139.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-29:139.5-142.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“24,55”
Context: 3,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · copperGrade: 0.35Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 6.5 m
- True Width
- 5.3625 m
- From
- 98.5 m
- To
- 105 m
- Intercept Depth
- 98.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:98.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows moderate copper equivalent grades over a moderate length, with individual copper grades also moderate, but other metals are low.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Moderate intercept length
- True width estimated
Negative factors
- Copper grade is moderate for VMS deposit type
- Zinc, gold, and silver grades are weak or below weak
- Apparent width only (true width is an estimate)
Evidence · table
“0,35”
Context: 6,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.3625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · zincGrade: 0.37Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 6.5 m
- True Width
- 5.3625 m
- From
- 98.5 m
- To
- 105 m
- Intercept Depth
- 98.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:98.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows a zinc grade below the weak threshold for VMS deposits over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,37”
Context: 6,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.3625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · goldGrade: 0.09Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 6.5 m
- True Width
- 5.3625 m
- From
- 98.5 m
- To
- 105 m
- Intercept Depth
- 98.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:98.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows a gold grade below the weak threshold over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,09”
Context: 6,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.3625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · silverGrade: 13.16Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 13.16
- Grade Unit
- g/t
- Intercept
- 6.5 m
- True Width
- 5.3625 m
- From
- 98.5 m
- To
- 105 m
- Intercept Depth
- 98.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:98.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows a silver grade below the weak threshold for VMS deposits over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“13,16”
Context: 6,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.3625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · copperGrade: 0.81Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 99 m
- To
- 99.5 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:99-99.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and moderate copper grades, along with weak gold and silver, indicating a high-grade veinlet.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- Weak gold grade
- Weak silver grade
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,81”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · zincGrade: 0.75Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 99 m
- To
- 99.5 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:99-99.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,75”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · goldGrade: 0.56Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 99 m
- To
- 99.5 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:99-99.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a weak gold grade.
Positive factors
- Weak gold grade
- True width estimated
Negative factors
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,56”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · silverGrade: 36.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 36.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4125 m
- From
- 99 m
- To
- 99.5 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:99-99.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a weak silver grade for VMS deposits.
Positive factors
- Weak silver grade for VMS deposit type
- True width estimated
Negative factors
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“36,10”
Context: 0,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4125
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · copperGrade: 0.54Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.0625 m
- From
- 102.5 m
- To
- 105 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:102.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.16
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows strong copper equivalent grades and moderate copper grades, indicating a higher-grade zone.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,54”
Context: 2,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.0625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · zincGrade: 0.51Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.0625 m
- From
- 102.5 m
- To
- 105 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:102.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.16
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,51”
Context: 2,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.0625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · goldGrade: 0.1Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2.0625 m
- From
- 102.5 m
- To
- 105 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:102.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.16
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,10”
Context: 2,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.0625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-30Langlade · silverGrade: 19.9Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-30
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 19.9
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2.0625 m
- From
- 102.5 m
- To
- 105 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-30:102.5-105
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.16
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“19,90”
Context: 2,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.0625
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · copperGrade: 0.2Grade Unit: %Intercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 21.9 m
- True Width
- 18.0675 m
- From
- 64.5 m
- To
- 86.4 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:64.5-86.4
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows moderate copper equivalent grades over a significant length, but individual metal grades are low.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Strong intercept length
- True width estimated
Negative factors
- Copper grade is below weak for VMS deposit type
- Zinc, gold, and silver grades are weak or below weak
- Apparent width only (true width is an estimate)
Evidence · table
“0,20”
Context: 21,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.0675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · zincGrade: 0.3Grade Unit: %Intercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 21.9 m
- True Width
- 18.0675 m
- From
- 64.5 m
- To
- 86.4 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:64.5-86.4
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a zinc grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,30”
Context: 21,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.0675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · goldGrade: 0.05Grade Unit: g/tIntercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 21.9 m
- True Width
- 18.0675 m
- From
- 64.5 m
- To
- 86.4 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:64.5-86.4
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a gold grade below the weak threshold, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,05”
Context: 21,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.0675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · silverGrade: 4.68Grade Unit: g/tIntercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 4.68
- Grade Unit
- g/t
- Intercept
- 21.9 m
- True Width
- 18.0675 m
- From
- 64.5 m
- To
- 86.4 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:64.5-86.4
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a silver grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“4,68”
Context: 21,9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.0675
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · copperGrade: 0.29Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 66 m
- To
- 67.2 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:66-67.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and weak copper grades, indicating a higher-grade zone.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Weak copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,29”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · zincGrade: 2.35Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 2.35
- Grade Unit
- %
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 66 m
- To
- 67.2 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:66-67.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a weak zinc grade for VMS deposits.
Positive factors
- Weak zinc grade for VMS deposit type
- True width estimated
Negative factors
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“2,35”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · goldGrade: 0.05Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 66 m
- To
- 67.2 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:66-67.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,05”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · silverGrade: 10.7Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 10.7
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 66 m
- To
- 67.2 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:66-67.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“10,70”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · copperGrade: 0.64Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 70 m
- To
- 71.2 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:70-71.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and moderate copper grades, indicating a higher-grade zone.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Moderate copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,64”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · zincGrade: 1.16Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 1.16
- Grade Unit
- %
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 70 m
- To
- 71.2 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:70-71.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“1,16”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · goldGrade: 0.03Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 70 m
- To
- 71.2 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:70-71.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,03”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-31Langlade · silverGrade: 13.5Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-31
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 13.5
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 0.99 m
- From
- 70 m
- To
- 71.2 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-31:70-71.2
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“13,50”
Context: 1,2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · copperGrade: 0.12Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 5.5 m
- True Width
- 4.5375 m
- From
- 64.5 m
- To
- 80 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-80
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows low copper equivalent grades and individual metal grades below the weak threshold over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Copper grade is below weak for VMS deposit type
- Zinc, gold, and silver grades are weak or below weak
- Apparent width only (true width is an estimate)
Evidence · table
“0,12”
Context: 5,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.5375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · zincGrade: 0.14Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 5.5 m
- True Width
- 4.5375 m
- From
- 64.5 m
- To
- 80 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-80
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows a zinc grade below the weak threshold for VMS deposits over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,14”
Context: 5,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.5375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · goldGrade: 0.03Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 5.5 m
- True Width
- 4.5375 m
- From
- 64.5 m
- To
- 80 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-80
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows a gold grade below the weak threshold over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,03”
Context: 5,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.5375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · silverGrade: 4Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 5.5 m
- True Width
- 4.5375 m
- From
- 64.5 m
- To
- 80 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-80
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept shows a silver grade below the weak threshold for VMS deposits over a moderate length.
Positive factors
- Moderate intercept length
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“4,00”
Context: 5,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.5375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · copperGrade: 1.15Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 1.15
- Grade Unit
- %
- Intercept
- 0.8 m
- True Width
- 0.66 m
- From
- 64.5 m
- To
- 65.3 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-65.3
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.92
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and strong copper grades, along with weak silver, indicating a high-grade veinlet.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Strong copper grade for VMS deposit type
- Weak silver grade for VMS deposit type
- True width estimated
Negative factors
- Zinc and gold grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“1,15”
Context: 0,8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.66
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · zincGrade: 0.18Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 0.8 m
- True Width
- 0.66 m
- From
- 64.5 m
- To
- 65.3 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-65.3
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.92
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,18”
Context: 0,8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.66
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · goldGrade: 0.08Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.66 m
- From
- 64.5 m
- To
- 65.3 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-65.3
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.92
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,08”
Context: 0,8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.66
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · silverGrade: 34.4Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 34.4
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.66 m
- From
- 64.5 m
- To
- 65.3 m
- Intercept Depth
- 64.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:64.5-65.3
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.92
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a weak silver grade for VMS deposits.
Positive factors
- Weak silver grade for VMS deposit type
- True width estimated
Negative factors
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“34,4”
Context: 0,8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.66
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · copperGrade: 0.16Grade Unit: %Intercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 11.5 m
- True Width
- 9.4875 m
- From
- 91 m
- To
- 102.5 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:91-102.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows moderate copper equivalent grades over a significant length, but individual metal grades are low.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Strong intercept length
- True width estimated
Negative factors
- Copper grade is below weak for VMS deposit type
- Zinc, gold, and silver grades are weak or below weak
- Apparent width only (true width is an estimate)
Evidence · table
“0,16”
Context: 11,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.4875
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · zincGrade: 0.12Grade Unit: %Intercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 11.5 m
- True Width
- 9.4875 m
- From
- 91 m
- To
- 102.5 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:91-102.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a zinc grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,12”
Context: 11,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.4875
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · goldGrade: 0.07Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 11.5 m
- True Width
- 9.4875 m
- From
- 91 m
- To
- 102.5 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:91-102.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a gold grade below the weak threshold, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,07”
Context: 11,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.4875
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · silverGrade: 2.92Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 2.92
- Grade Unit
- g/t
- Intercept
- 11.5 m
- True Width
- 9.4875 m
- From
- 91 m
- To
- 102.5 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:91-102.5
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a silver grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“2,92”
Context: 11,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.4875
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · copperGrade: 0.48Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.48
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 93 m
- To
- 94 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:93-94
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows moderate copper equivalent grades and weak copper grades, indicating a higher-grade zone.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Weak copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,48”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · zincGrade: 0.58Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 93 m
- To
- 94 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:93-94
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,58”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · goldGrade: 0.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 93 m
- To
- 94 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:93-94
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,10”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-32Langlade · silverGrade: 7.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LAN-26-32
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 7.4
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.825 m
- From
- 93 m
- To
- 94 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-32:93-94
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“7,40”
Context: 1,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.825
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · copperGrade: 0.2Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 22 m
- True Width
- 18.15 m
- From
- 68 m
- To
- 90 m
- Intercept Depth
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:68-90
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows moderate copper equivalent grades over a significant length, but individual metal grades are low.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Strong intercept length
- True width estimated
Negative factors
- Copper grade is below weak for VMS deposit type
- Zinc, gold, and silver grades are weak or below weak
- Apparent width only (true width is an estimate)
Evidence · table
“0,20”
Context: 22,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.15
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · zincGrade: 0.15Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 22 m
- True Width
- 18.15 m
- From
- 68 m
- To
- 90 m
- Intercept Depth
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:68-90
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a zinc grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,15”
Context: 22,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.15
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · goldGrade: 0.06Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 22 m
- True Width
- 18.15 m
- From
- 68 m
- To
- 90 m
- Intercept Depth
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:68-90
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a gold grade below the weak threshold, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“0,06”
Context: 22,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.15
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · silverGrade: 5.05Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 5.05
- Grade Unit
- g/t
- Intercept
- 22 m
- True Width
- 18.15 m
- From
- 68 m
- To
- 90 m
- Intercept Depth
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:68-90
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This broad intercept shows a silver grade below the weak threshold for VMS deposits, despite the significant length.
Positive factors
- Strong intercept length
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Apparent width only (true width is an estimate)
Evidence · table
“5,05”
Context: 22,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18.15
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · copperGrade: 0.49Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.65 m
- From
- 73.6 m
- To
- 75.6 m
- Intercept Depth
- 73.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:73.6-75.6
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows moderate copper equivalent grades and weak copper grades, indicating a higher-grade zone.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Weak copper grade for VMS deposit type
- True width estimated
Negative factors
- Zinc, gold, and silver grades are weak or below weak
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,49”
Context: 2,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · zincGrade: 0.26Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.65 m
- From
- 73.6 m
- To
- 75.6 m
- Intercept Depth
- 73.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:73.6-75.6
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,26”
Context: 2,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · goldGrade: 0.05Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.65 m
- From
- 73.6 m
- To
- 75.6 m
- Intercept Depth
- 73.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:73.6-75.6
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a gold grade below the weak threshold.
Positive factors
- True width estimated
Negative factors
- Gold grade is below weak for default deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,05”
Context: 2,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · silverGrade: 11.97Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 11.97
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.65 m
- From
- 73.6 m
- To
- 75.6 m
- Intercept Depth
- 73.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:73.6-75.6
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“11,97”
Context: 2,0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · copperGrade: 0.34Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.2375 m
- From
- 85.5 m
- To
- 87 m
- Intercept Depth
- 85.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:85.5-87
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows strong copper equivalent grades and weak copper and gold grades, indicating a higher-grade zone.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Weak copper grade for VMS deposit type
- Weak gold grade
- True width estimated
Negative factors
- Zinc and silver grades are weak or below weak
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,34”
Context: 1,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · zincGrade: 0.11Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.2375 m
- From
- 85.5 m
- To
- 87 m
- Intercept Depth
- 85.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:85.5-87
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a zinc grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Zinc grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,11”
Context: 1,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · goldGrade: 0.46Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 0.46
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.2375 m
- From
- 85.5 m
- To
- 87 m
- Intercept Depth
- 85.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:85.5-87
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a weak gold grade.
Positive factors
- Weak gold grade
- True width estimated
Negative factors
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“0,46”
Context: 1,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAN-26-33Langlade · silverGrade: 6.7Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LAN-26-33
- Project
- Langlade
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- BGD
Geometry
- Grade
- 6.7
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.2375 m
- From
- 85.5 m
- To
- 87 m
- Intercept Depth
- 85.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAN-26-33:85.5-87
- Mining Method
- unknown
QA/QC
- Laboratory
- AGAT
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very narrow sub-interval shows a silver grade below the weak threshold for VMS deposits.
Positive factors
- True width estimated
Negative factors
- Silver grade is below weak for VMS deposit type
- Very narrow intercept length
- Apparent width only (true width is an estimate)
Evidence · table
“6,70”
Context: 1,5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2375
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 77BODO · goldGrade: 6.85Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 6.85
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned an exceptional gold grade, indicating high-grade mineralization at surface.
Positive factors
- Exceptional gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“6,85”
Context: F671605
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 78BODO · silverGrade: 63Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 63
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak silver grade.
Positive factors
- Weak silver grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“63,00”
Context: F671605
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 79BODO · copperGrade: 2.82Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 2.82
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned an exceptional copper grade, indicating high-grade mineralization at surface.
Positive factors
- Exceptional copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“2,82”
Context: F671605
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 80BODO · cobaltGrade: 0.0116Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0116
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“116”
Context: F671605
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 81BODO · goldGrade: 4.14Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 4.14
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak gold grade.
Positive factors
- Weak gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“4,14”
Context: F671606
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 82BODO · silverGrade: 1.3Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a silver grade below the weak threshold.
Negative factors
- Silver grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“1,30”
Context: F671606
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 83BODO · copperGrade: 0.01Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.01
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a copper grade below the weak threshold.
Negative factors
- Copper grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“0,01”
Context: F671606
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 84BODO · cobaltGrade: 0.0028Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0028
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“28”
Context: F671606
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 85BODO · goldGrade: 0.65Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.65
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak gold grade.
Positive factors
- Weak gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“0,65”
Context: F671613
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 86BODO · silverGrade: 11Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 11
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a silver grade below the weak threshold.
Negative factors
- Silver grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“11,00”
Context: F671613
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 87BODO · copperGrade: 1.38Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 1.38
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a strong copper grade.
Positive factors
- Strong copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“1,38”
Context: F671613
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 88BODO · cobaltGrade: 0.0061Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0061
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“61”
Context: F671613
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 89BODO · goldGrade: 0.28Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a gold grade below the weak threshold.
Negative factors
- Gold grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“0,28”
Context: F671616
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 90BODO · silverGrade: 16.1Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 16.1
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a silver grade below the weak threshold.
Negative factors
- Silver grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“16,10”
Context: F671616
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 91BODO · copperGrade: 2.21Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 2.21
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a strong copper grade.
Positive factors
- Strong copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“2,21”
Context: F671616
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 92BODO · cobaltGrade: 0.0072Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0072
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“72”
Context: F671616
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 93BODO · goldGrade: 2.53Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 2.53
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a strong gold grade.
Positive factors
- Strong gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“2,53”
Context: F671617
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 94BODO · silverGrade: 137Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 137
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a moderate silver grade.
Positive factors
- Moderate silver grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“137,00”
Context: F671617
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 95BODO · copperGrade: 15.2Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 15.2
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned an exceptional copper grade, indicating very high-grade mineralization at surface.
Positive factors
- Exceptional copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“15,20”
Context: F671617
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 96BODO · cobaltGrade: 0.0577Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0577
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“577”
Context: F671617
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 97BODO · goldGrade: 4.17Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 4.17
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak gold grade.
Positive factors
- Weak gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“4,17”
Context: F671703
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 98BODO · silverGrade: 5.9Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 5.9
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a silver grade below the weak threshold.
Negative factors
- Silver grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“5,90”
Context: F671703
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 99BODO · copperGrade: 0.24Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.24
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a copper grade below the weak threshold.
Negative factors
- Copper grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“0,24”
Context: F671703
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 100BODO · cobaltGrade: 0.0052Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0052
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“52”
Context: F671703
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 101BODO · goldGrade: 0.58Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak gold grade.
Positive factors
- Weak gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“0,58”
Context: F671707
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 102BODO · silverGrade: 69.4Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 69.4
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak silver grade.
Positive factors
- Weak silver grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“69,40”
Context: F671707
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 103BODO · copperGrade: 3.96Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 3.96
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned an exceptional copper grade, indicating high-grade mineralization at surface.
Positive factors
- Exceptional copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“3,96”
Context: F671707
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 104BODO · cobaltGrade: 0.0215Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0215
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“215”
Context: F671707
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 105BODO · goldGrade: 1.16Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a moderate gold grade.
Positive factors
- Moderate gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“1,16”
Context: F671713
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 106BODO · silverGrade: 66Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 66
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak silver grade.
Positive factors
- Weak silver grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“66,00”
Context: F671713
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 107BODO · copperGrade: 3.22Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 3.22
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned an exceptional copper grade, indicating high-grade mineralization at surface.
Positive factors
- Exceptional copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“3,22”
Context: F671713
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 108BODO · cobaltGrade: 0.0007Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.0007
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“7”
Context: F671713
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 109BODO · goldGrade: 2.2Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a strong gold grade.
Positive factors
- Strong gold grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“2,20”
Context: F671714
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 110BODO · silverGrade: 62.4Grade Unit: g/tView all detailsHide details
Identity
- Project
- BODO
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 62.4
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a weak silver grade.
Positive factors
- Weak silver grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“62,40”
Context: F671714
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 111BODO · copperGrade: 6.83Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 6.83
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned an exceptional copper grade, indicating very high-grade mineralization at surface.
Positive factors
- Exceptional copper grade for default deposit type
Negative factors
- Surface sample has lower confidence than drill results
Evidence · table
“6,83”
Context: F671714
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 112BODO · cobaltGrade: 0.002Grade Unit: %View all detailsHide details
Identity
- Project
- BODO
- Commodity
- cobalt
- Region
- canada_qc
- Reported Region
- Quebec
- Ticker
- BGD
Geometry
- Grade
- 0.002
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This surface sample returned a cobalt grade below the weak threshold.
Negative factors
- Cobalt grade is below weak for default deposit type
- Surface sample has lower confidence than drill results
Evidence · table
“20”
Context: F671714
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.