# Cabral Gold Announces Additional Results of Infill Drilling at the MG Gold Deposit, Cui&\#xFA; Cui&\#xFA; Gold District, Brazil. Doubles Number of Drill Rigs on Site to Six

Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1

Original source: https://money.tmx.com/en/quote/CBR/news/5478904330045848/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos

Publisher: tmx

Original announcement: 2026-05-07T10:31:00.000Z

Analysis by Minestarters Atlas

Atlas analysis published: Unknown date

Atlas analysis updated: Unknown date

- Company: Cabral Gold Inc.

- Ticker: CBR

- Exchange: TSX

- Region: Brazil

- Primary commodity: Gold

- Secondary commodities: None reported

- Document categories: Drill results, Resource update, Economic study

- Extracted: 2026-09-17 15:04:28 UTC

Narrative sentiment: 0.80 · Bullish

## Minestarters Atlas summary

Cabral Gold announced additional infill drilling results from the MG Gold Deposit in Brazil, confirming good gold grades and continuity in near-surface oxide material. These results will be used to refine the mine plan and upgrade reserves for the Phase 1 gold-in-oxide heap leach operation, which is 70% complete and expected to commence production in Q4 2026. The company is also doubling its drill rig count to six to accelerate exploration and resource expansion.

Reasoning: The infill drilling results at the MG Gold Deposit confirm good gold grades over significant widths in weathered saprolite and blanket sediments, supporting the ongoing development of the Phase 1 gold-in-oxide heap leach operation. The expansion of the drilling program also signals increased exploration and resource growth potential.

- Positive factor: Infill drilling confirms good gold grades and continuity in the MG starter pit.

- Positive factor: Results support the mine plan and reserve upgrade for the gold-in-oxide heap leach operation.

- Positive factor: Phase 1 gold-in-oxide heap leach operation is 70% complete, indicating near-term production.

- Positive factor: Company is doubling drill rigs to six, with a focus on exploration and resource expansion.

- Positive factor: Near-surface oxide material is amenable to heap leach processing.

- Negative factor: True width is not stated for individual intercepts, only a general estimate that it may be up to 50% of downhole length.

Facts used in scoring: 50

## Classification and evidence

No classification tags are available.

## Extracted facts

Stored fact records: 50. Some facts used in scoring do not have a stored record.

## Drill Results (50)

### RC642

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-0)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC642
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.47
- Grade Unit: g/t
- Intercept: 21 m
- From: 0 m
- To: 21 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC642:0-21
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 21.0m at 0.47 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 9.87 g/t·m, which is below the weak threshold of 10 g/t·m, but the near-surface nature and width are positive.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.47

Context: 21.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC642

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-1)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC642
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.72
- Grade Unit: g/t
- Intercept: 3 m
- From: 47 m
- To: 50 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC642:47-50
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 3.0m at 0.72 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its materiality. The GT product is 2.16 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.72

Context: 3.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC645

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-2)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC645
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.49
- Grade Unit: g/t
- Intercept: 49 m
- From: 0 m
- To: 49 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC645:0-49
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 49.0m at 0.49 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 24.01 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.49

Context: 49.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC645

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-3)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC645
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.39
- Grade Unit: g/t
- Intercept: 4 m
- From: 6 m
- To: 10 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC645:6-10
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 4.0m at 1.39 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 5.56 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.39

Context: 4.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC645

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-4)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC645
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.13
- Grade Unit: g/t
- Intercept: 2 m
- From: 37 m
- To: 39 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC645:37-39
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 1.13 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 2.26 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.13

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC646

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-5)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC646
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.58
- Grade Unit: g/t
- Intercept: 13 m
- From: 0 m
- To: 13 m
- Hole Depth: 40 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC646:0-13
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 13.0m at 0.58 g/t gold from surface is a moderate grade for an open pit gold target. The GT product is 7.54 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.58

Context: 13.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC646

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-6)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC646
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.71
- Grade Unit: g/t
- Intercept: 2 m
- From: 8 m
- To: 10 m
- Hole Depth: 40 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC646:8-10
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 1.71 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 3.42 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.71

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC646

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-7)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC646
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.3
- Grade Unit: g/t
- Intercept: 1 m
- From: 19 m
- To: 20 m
- Hole Depth: 40 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC646:19-20
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 0.30 g/t gold is a weak grade for an open pit gold target, and the narrow width limits its materiality. The GT product is 0.3 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.30

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC647

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-8)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC647
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.65
- Grade Unit: g/t
- Intercept: 48 m
- From: 0 m
- To: 48 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC647:0-48
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 48.0m at 0.65 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 31.2 g/t·m, which is above the moderate threshold of 30 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.65

Context: 48.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC647

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-9)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC647
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 3.82
- Grade Unit: g/t
- Intercept: 2 m
- From: 7 m
- To: 9 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC647:7-9
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 3.82 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 7.64 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 3.82

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC647

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-10)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC647
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 2
- Grade Unit: g/t
- Intercept: 3 m
- From: 29 m
- To: 32 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC647:29-32
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 3.0m at 2.00 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 6.0 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 2.00

Context: 3.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC648

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-11)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC648
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.68
- Grade Unit: g/t
- Intercept: 12 m
- From: 0 m
- To: 12 m
- Hole Depth: 25 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC648:0-12
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 12.0m at 0.68 g/t gold from surface is a moderate grade for an open pit gold target. The GT product is 8.16 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.68

Context: 12.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC648

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-12)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC648
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 2.12
- Grade Unit: g/t
- Intercept: 1 m
- From: 8 m
- To: 8 m
- Hole Depth: 25 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC648:8-8
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 2.12 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 2.12 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 2.12

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC649

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-13)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC649
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.33
- Grade Unit: g/t
- Intercept: 12 m
- From: 0 m
- To: 12 m
- Hole Depth: 25 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC649:0-12
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 12.0m at 0.33 g/t gold from surface is a weak grade for an open pit gold target. The GT product is 3.96 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Near-surface intercept.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.33

Context: 12.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC650

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-14)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC650
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.43
- Grade Unit: g/t
- Intercept: 23 m
- From: 0 m
- To: 23 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC650:0-23
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 23.0m at 1.43 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 32.89 g/t·m, which is above the moderate threshold of 30 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.43

Context: 23.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC650

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-15)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC650
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 2.63
- Grade Unit: g/t
- Intercept: 10 m
- From: 4 m
- To: 14 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC650:4-14
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 10.0m at 2.63 g/t gold is a strong grade for an open pit gold target. The GT product is 26.3 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 2.63

Context: 10.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC650

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-16)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC650
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.3
- Grade Unit: g/t
- Intercept: 8 m
- From: 31 m
- To: 39 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC650:31-39
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 8.0m at 0.30 g/t gold is a weak grade for an open pit gold target. The GT product is 2.4 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.30

Context: 8.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC650

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-17)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC650
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.42
- Grade Unit: g/t
- Intercept: 1 m
- From: 42 m
- To: 43 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC650:42-43
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 0.42 g/t gold is a weak grade for an open pit gold target, and the narrow width limits its materiality. The GT product is 0.42 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.42

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC650

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-18)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC650
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.83
- Grade Unit: g/t
- Intercept: 1 m
- From: 45 m
- To: 46 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC650:45-46
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 1.83 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 1.83 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.83

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC651

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-19)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC651
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.65
- Grade Unit: g/t
- Intercept: 24 m
- From: 0 m
- To: 24 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC651:0-24
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 24.0m at 0.65 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 15.6 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.65

Context: 24.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC651

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-20)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC651
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 4.25
- Grade Unit: g/t
- Intercept: 1 m
- From: 18 m
- To: 19 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC651:18-19
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 4.25 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 4.25 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 4.25

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC651

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-21)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC651
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.7
- Grade Unit: g/t
- Intercept: 1 m
- From: 27 m
- To: 28 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC651:27-28
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 1.70 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 1.7 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.70

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC651

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-22)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC651
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.3
- Grade Unit: g/t
- Intercept: 7 m
- From: 42 m
- To: 49 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC651:42-49
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 7.0m at 0.30 g/t gold is a weak grade for an open pit gold target. The GT product is 2.1 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.30

Context: 7.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC652

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-23)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC652
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.9
- Grade Unit: g/t
- Intercept: 29 m
- From: 0 m
- To: 29 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC652:0-29
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 29.0m at 0.90 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 26.1 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.90

Context: 29.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC652

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-24)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC652
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 2.23
- Grade Unit: g/t
- Intercept: 2 m
- From: 9 m
- To: 11 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC652:9-11
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 2.23 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 4.46 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 2.23

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems\(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

### RC652

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-25)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC652
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 3.2
- Grade Unit: g/t
- Intercept: 3 m
- From: 21 m
- To: 24 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC652:21-24
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 3.0m at 3.20 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 9.6 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 3.20

Context: 3.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC652

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-26)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC652
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.49
- Grade Unit: g/t
- Intercept: 13 m
- From: 36 m
- To: 49 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC652:36-49
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 13.0m at 0.49 g/t gold is a moderate grade for an open pit gold target. The GT product is 6.37 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.49

Context: 13.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC652

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-27)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC652
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 2.38
- Grade Unit: g/t
- Intercept: 1 m
- From: 38 m
- To: 39 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC652:38-39
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 2.38 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 2.38 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 2.38

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC653

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-28)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC653
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.45
- Grade Unit: g/t
- Intercept: 30 m
- From: 0 m
- To: 30 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC653:0-30
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 30.0m at 1.45 g/t gold from surface is a moderate grade and strong width for an open pit gold target, contributing positively to the infill program. The GT product is 43.5 g/t·m, which is above the moderate threshold of 30 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Strong continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.45

Context: 30.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC653

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-29)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC653
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 3.14
- Grade Unit: g/t
- Intercept: 10 m
- From: 7 m
- To: 17 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC653:7-17
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 10.0m at 3.14 g/t gold is a strong grade for an open pit gold target. The GT product is 31.4 g/t·m, which is above the moderate threshold of 30 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 3.14

Context: 10.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC653

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-30)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC653
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.56
- Grade Unit: g/t
- Intercept: 5 m
- From: 37 m
- To: 42 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC653:37-42
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 5.0m at 0.56 g/t gold is a moderate grade for an open pit gold target. The GT product is 2.8 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.56

Context: 5.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC654

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-31)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC654
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.33
- Grade Unit: g/t
- Intercept: 11 m
- From: 0 m
- To: 11 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC654:0-11
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 11.0m at 0.33 g/t gold from surface is a weak grade for an open pit gold target. The GT product is 3.63 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Near-surface intercept.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.33

Context: 11.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC654

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-32)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC654
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.16
- Grade Unit: g/t
- Intercept: 2 m
- From: 16 m
- To: 18 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC654:16-18
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 0.16 g/t gold is a very weak grade for an open pit gold target, and the narrow width limits its materiality. The GT product is 0.32 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Very weak grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.16

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC654

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-33)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC654
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.23
- Grade Unit: g/t
- Intercept: 1 m
- From: 26 m
- To: 27 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC654:26-27
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 0.23 g/t gold is a very weak grade for an open pit gold target, and the narrow width limits its materiality. The GT product is 0.23 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Very weak grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.23

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC655

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-34)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC655
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.32
- Grade Unit: g/t
- Intercept: 11 m
- From: 0 m
- To: 11 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC655:0-11
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 11.0m at 0.32 g/t gold from surface is a weak grade for an open pit gold target. The GT product is 3.52 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Near-surface intercept.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.32

Context: 11.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC655

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-35)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC655
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.49
- Grade Unit: g/t
- Intercept: 2 m
- From: 37 m
- To: 39 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC655:37-39
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 0.49 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 0.98 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.49

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC656

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-36)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC656
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.53
- Grade Unit: g/t
- Intercept: 11 m
- From: 0 m
- To: 11 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC656:0-11
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 11.0m at 0.53 g/t gold from surface is a moderate grade for an open pit gold target. The GT product is 5.83 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.53

Context: 11.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC656

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-37)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC656
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.22
- Grade Unit: g/t
- Intercept: 1 m
- From: 7 m
- To: 8 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC656:7-8
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 1.22 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 1.22 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.22

Context: 1.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC656

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-38)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC656
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.54
- Grade Unit: g/t
- Intercept: 7 m
- From: 37 m
- To: 44 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC656:37-44
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 7.0m at 0.54 g/t gold is a moderate grade for an open pit gold target. The GT product is 3.78 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.54

Context: 7.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC657

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-39)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC657
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.8
- Grade Unit: g/t
- Intercept: 19 m
- From: 0 m
- To: 19 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC657:0-19
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 19.0m at 1.80 g/t gold from surface is a moderate grade and moderate width for an open pit gold target, contributing positively to the infill program. The GT product is 34.2 g/t·m, which is above the moderate threshold of 30 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Moderate continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.80

Context: 19.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC657

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-40)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC657
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 11.76
- Grade Unit: g/t
- Intercept: 1 m
- From: 5 m
- To: 6 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC657:5-6
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 11.76 g/t gold is an exceptional grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 11.76 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Exceptional grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 11.76

Context: 1.0

#### Tags used in scoring

**Bonanza Intercept**

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.

Evidence · table

> 11.76

Context: 1.0

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC657

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-41)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC657
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 15.7
- Grade Unit: g/t
- Intercept: 1 m
- From: 7 m
- To: 8 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC657:7-8
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 1.0m at 15.70 g/t gold is an exceptional grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 15.7 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Exceptional grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 15.70

Context: 1.0

#### Tags used in scoring

**Bonanza Intercept**

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.

Evidence · table

> 15.70

Context: 1.0

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC658

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-42)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC658
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.6
- Grade Unit: g/t
- Intercept: 19 m
- From: 0 m
- To: 19 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC658:0-19
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 19.0m at 0.60 g/t gold from surface is a moderate grade and moderate width for an open pit gold target, contributing positively to the infill program. The GT product is 11.4 g/t·m, which is above the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Moderate continuity of mineralization.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.60

Context: 19.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC658

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-43)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC658
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 2.88
- Grade Unit: g/t
- Intercept: 2 m
- From: 8 m
- To: 10 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC658:8-10
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 2.88 g/t gold is a strong grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 5.76 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Strong grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 2.88

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC658

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-44)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC658
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.33
- Grade Unit: g/t
- Intercept: 6 m
- From: 31 m
- To: 37 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC658:31-37
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 6.0m at 0.33 g/t gold is a weak grade for an open pit gold target. The GT product is 1.98 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.33

Context: 6.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC659

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-45)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC659
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.77
- Grade Unit: g/t
- Intercept: 8 m
- From: 0 m
- To: 8 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC659:0-8
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 8.0m at 0.77 g/t gold from surface is a moderate grade for an open pit gold target. The GT product is 6.16 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Positive factor: Near-surface intercept.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.77

Context: 8.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC659

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-46)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC659
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 1.51
- Grade Unit: g/t
- Intercept: 2 m
- From: 5 m
- To: 7 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC659:5-7
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 2.0m at 1.51 g/t gold is a moderate grade for an open pit gold target, but the narrow width limits its overall materiality. The GT product is 3.02 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Moderate grade for open pit gold.

- Negative factor: Narrow intercept width.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 1.51

Context: 2.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC659

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-47)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC659
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.26
- Grade Unit: g/t
- Intercept: 9 m
- From: 15 m
- To: 24 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC659:15-24
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 9.0m at 0.26 g/t gold is a very weak grade for an open pit gold target. The GT product is 2.34 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Very weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.26

Context: 9.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC659

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-48)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC659
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.19
- Grade Unit: g/t
- Intercept: 7 m
- From: 31 m
- To: 38 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC659:31-38
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 7.0m at 0.19 g/t gold is a very weak grade for an open pit gold target. The GT product is 1.33 g/t·m, which is below the weak threshold of 10 g/t·m.

- Negative factor: Very weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.19

Context: 7.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### RC660

[Link to this fact](https://atlas-extractions.minestarters.com/news/cabral-gold-announces-additional-results-of-infill-drilling-at-the-mg-gold-depos--4c6f940c-70f8-47f4-ad2e-7f212cc589e1#fact-drill-facts-49)

MG Gold Deposit · gold

#### Identity

- Hole ID: RC660
- Project: MG Gold Deposit
- Commodity: gold
- Region: brazil
- Reported Region: brazil
- Ticker: CBR

#### Geometry

- Grade: 0.41
- Grade Unit: g/t
- Intercept: 10 m
- From: 0 m
- To: 10 m
- Hole Depth: 50 m
- Intercept Depth: 0 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: RC660:0-10
- Mining Method: open\_pit

#### Location

- Azimuth: 180 °
- Dip: -60 °

#### QA/QC

- Laboratory: SGS GEOSOL Laboratorios
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates, check\_assays

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-07T00:00:00.000Z

Reasoning: The intercept of 10.0m at 0.41 g/t gold from surface is a weak grade for an open pit gold target. The GT product is 4.1 g/t·m, which is below the weak threshold of 10 g/t·m.

- Positive factor: Near-surface intercept.

- Negative factor: Weak grade for open pit gold.

- Negative factor: Apparent width only, true width not stated.

Evidence · table

> 0.41

Context: 10.0

#### Tags used in scoring

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Evidence · text

> True widths may be up to 50% of actual drill intercepts

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Evidence · text

> Cabral maintains a Quality Assurance / Quality Control \("QAQC"\) program for all its exploration projects using industry best practices. Key elements of the QAQC program include verifiable chain of custody for samples, regular insertion of certified reference materials, blanks, and duplicates, as well as check assays on results. RC samples are split, collected in plastic sample bags, and sealed on drill hole location. Drill core is halved by saw cut or slicer \(in soft saprolite\). RC and core samples are shipped in sealed bags by independent contractor to SGS GEOSOL Laboratorios in Vespasiano, Brazil, an independent analytical services provider with global certifications for Quality Management Systems \(ISO 9001:2015 and ISO 14001:2015 \(ABS Certificates 32982 and 39911\) and ISO/IEC 17025:2017 accreditation \(CRL-0386\)\). Gold analyses are routinely performed via 50g fire assay with secondary assay techniques applied on higher grade samples. Final assay results are validated by Cabral Geological Staff prior to insertion into the database. Additional information regarding the Company's data verification processes is set out in the CBR, 43-101, PFS Technical Report, July 2025, which can be found on the Company's website. Qualified Person and Technical Information Technical information included in this release was supervised and approved by Brian Arkell, B.S. Geology and M.S. Economic Geology, SME \(Registered Member\), AusIMM \(Fellow\) and SEG \(Fellow\), Cabral Gold's Vice President, Exploration and Technical Services, and a Qualified Person under NI 43-101.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

Evidence · text

> The program of infill drilling is aimed at improving the confidence around the current mine plan at MG and upgrading the current reserve.

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

## How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.