Canstar Resources Intersects 15.6 Metres of Massive Sulphide Grading 2.3% CuEq at Mary March, Including 9.75 Metres at 3.3% CuEq
Original announcement by tmx on
- Company
- Canstar Resources Inc.
- Ticker
- ROX
- Exchange
- TSX
- Region
- Newfoundland
- Primary commodity
- Copper
- Secondary commodities
- Lead, Zinc, Gold, Silver
- Document categories
- Drill results, Capital raise, Agreement transaction
- Extracted
- 2026-09-18 18:26:54 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Canstar Resources announced results from the first phase of its 2026 drill program at the Mary March Project in central Newfoundland, highlighted by a 15.6-metre massive sulphide intercept grading 2.3% CuEq in drill hole MM-26-42, including a higher-grade section of 9.75 metres at 3.3% CuEq. All four holes drilled in this phase intersected mineralization, confirming the geological model for the VMS system. The company also reported additional funding from its earn-in partner VMS Mining Corporation and the conversion of Glencore's legacy joint-venture interest into a 2% net smelter returns royalty.
Reasoning: Canstar Resources reported significant drill results from its 2026 Phase 1 program at the Mary March Project, including the widest massive sulphide intercept in the project's drilling record, with all four holes intersecting visually logged mineralization. This indicates strong exploration success and potential for a significant VMS system, supported by additional funding from its earn-in partner.
Positive factors
- Widest massive sulphide intercept in project history
- All four Phase 1 holes intersected mineralization
- High-grade polymetallic mineralization (Cu, Pb, Zn, Au, Ag)
- VMS system potential
- Earn-in partner VMSC provided additional funding for future drilling
- QA/QC procedures disclosed and QP signed off
Negative factors
- True width of intercepts not determined
- Mineralization is fault-bounded, implying structural complexity
- Assays pending for other visually logged intervals
Facts used in scoring: 98
Extracted facts
Stored fact records: 97. Some facts used in scoring do not have a stored record.
Drill Results (97)
MM-26-42government research describes the Mary March alteration · copperGrade: 0.73Grade Unit: %Intercept: 15.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 15.6 m
- From
- 467.4 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept represents a high-grade copper equivalent result over a significant width, marking the widest massive sulphide intercept in the project's history, indicating strong exploration success for a VMS system.
Positive factors
- High-grade copper equivalent
- Significant intercept length
- Widest massive sulphide intercept in project history
- VMS deposit type
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“0.73”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.73Grade Unit: %Intercept: 15.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 15.6 m
- From
- 467.4 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a notable lead grade as part of a significant polymetallic discovery, contributing to the overall high CuEq value.
Positive factors
- Significant lead grade as part of polymetallic intercept
- Widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“0.73”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 2.1Grade Unit: %Intercept: 15.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 2.1
- Grade Unit
- %
- Intercept
- 15.6 m
- From
- 467.4 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a high zinc grade, a key component of the polymetallic VMS mineralization, contributing significantly to the overall CuEq value.
Positive factors
- High-grade zinc as part of polymetallic intercept
- Widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“2.10”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.71Grade Unit: g/tIntercept: 15.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 15.6 m
- From
- 467.4 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The gold grade provides a valuable credit within the polymetallic VMS system, enhancing the overall economic potential of the intercept.
Positive factors
- Gold credit as part of polymetallic intercept
- Widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“0.71”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 19Grade Unit: g/tIntercept: 15.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 19
- Grade Unit
- g/t
- Intercept
- 15.6 m
- From
- 467.4 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The silver grade provides a valuable credit within the polymetallic VMS system, contributing to the overall economic potential of the intercept.
Positive factors
- Silver credit as part of polymetallic intercept
- Widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“19.0”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 1.13Grade Unit: %Intercept: 9.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.13
- Grade Unit
- %
- Intercept
- 9.75 m
- From
- 473.25 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This high-grade copper equivalent sub-interval demonstrates excellent mineralization within the broader significant intercept, reinforcing the project's potential.
Positive factors
- Very high-grade copper equivalent
- Significant intercept length
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“1.13”
Context: 9.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 1.14Grade Unit: %Intercept: 9.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.14
- Grade Unit
- %
- Intercept
- 9.75 m
- From
- 473.25 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The high lead grade in this sub-interval contributes significantly to the overall polymetallic value and CuEq grade.
Positive factors
- High-grade lead as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“1.14”
Context: 9.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 3.27Grade Unit: %Intercept: 9.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 3.27
- Grade Unit
- %
- Intercept
- 9.75 m
- From
- 473.25 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The very high zinc grade in this sub-interval is a strong indicator of significant polymetallic mineralization within the VMS system.
Positive factors
- Very high-grade zinc as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“3.27”
Context: 9.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.89Grade Unit: g/tIntercept: 9.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 9.75 m
- From
- 473.25 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The gold grade in this sub-interval adds significant value to the polymetallic mineralization, contributing to the overall economic potential.
Positive factors
- Good gold credit as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“0.89”
Context: 9.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 25.5Grade Unit: g/tIntercept: 9.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 25.5
- Grade Unit
- g/t
- Intercept
- 9.75 m
- From
- 473.25 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The silver grade in this sub-interval adds significant value to the polymetallic mineralization, contributing to the overall economic potential.
Positive factors
- Good silver credit as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“25.5”
Context: 9.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 1.71Grade Unit: %Intercept: 5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.71
- Grade Unit
- %
- Intercept
- 5 m
- From
- 476 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:476-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional copper equivalent grade, with very high copper content, indicating a highly mineralized zone within the broader intercept.
Positive factors
- Exceptional copper equivalent grade
- High-grade copper
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“1.71”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 1.11Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.11
- Grade Unit
- %
- Intercept
- 5 m
- From
- 476 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:476-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The high lead grade in this sub-interval contributes significantly to the overall polymetallic value and CuEq grade.
Positive factors
- High-grade lead as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“1.11”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 3.02Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 3.02
- Grade Unit
- %
- Intercept
- 5 m
- From
- 476 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:476-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The very high zinc grade in this sub-interval is a strong indicator of significant polymetallic mineralization within the VMS system.
Positive factors
- Very high-grade zinc as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“3.02”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.94Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 476 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:476-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The gold grade in this sub-interval adds significant value to the polymetallic mineralization, contributing to the overall economic potential.
Positive factors
- Good gold credit as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“0.94”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 32.6Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 32.6
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 476 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- MM-26-42:476-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: The silver grade in this sub-interval adds significant value to the polymetallic mineralization, contributing to the overall economic potential.
Positive factors
- Good silver credit as part of polymetallic intercept
- Part of the widest massive sulphide intercept in project history
Negative factors
- True width not determined
- Mineralization is fault-bounded
Evidence · table
“32.6”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-41Mary MarchView all detailsHide details
Identity
- Hole ID
- MM-26-41
- Project
- Mary March
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Hole Depth
- 757 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
Location
- Easting
- 534419
- Northing
- 5408974
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 188 m
- Azimuth
- 145.52 °
- Dip
- -47.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Collar details for MM-26-41 are provided, indicating it was part of the successful Phase 1 drill program that intersected mineralization, though assays are pending for this specific hole.
Positive factors
- Drill hole collar details provided
- Part of a successful exploration program
Negative factors
- Assays pending for mineralization
Evidence · table
“MM-26-41”
Context: MM-26-41
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-43Mary MarchView all detailsHide details
Identity
- Hole ID
- MM-26-43
- Project
- Mary March
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Hole Depth
- 745 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
Location
- Easting
- 534283
- Northing
- 5408843
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 193 m
- Azimuth
- 136.58 °
- Dip
- -57.75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Collar details for MM-26-43 are provided, indicating it was a successful step-out hole extending the altered rhyolite, with assays pending for visually logged mineralization.
Positive factors
- Drill hole collar details provided
- Step-out hole extending altered rhyolite
Negative factors
- Assays pending for mineralization
Evidence · table
“MM-26-43”
Context: MM-26-43
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-44government research describes the Mary March alterationView all detailsHide details
Identity
- Hole ID
- MM-26-44
- Project
- government research describes the Mary March alteration
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Hole Depth
- 678 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 133.04 °
- Dip
- -58.98 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Collar details for MM-26-44 are provided, indicating it intersected visually logged massive sulphide, with assays pending for these intervals.
Positive factors
- Drill hole collar details provided
- Intersected visually logged massive sulphide
Negative factors
- Assays pending for mineralization
Evidence · table
“MM-26-44”
Context: MM-26-44
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-294-03Nancy April zone · copperGrade: 0.13Grade Unit: %Intercept: 20.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-294-03
- Project
- Nancy April zone
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 20.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical copper intercept from the Nancy April zone, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical copper mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“MM-294-03, which intersected 20.6 m grading 0.13% Cu”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MM-294-03Nancy April zone · leadGrade: 1.08Grade Unit: %Intercept: 20.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-294-03
- Project
- Nancy April zone
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.08
- Grade Unit
- %
- Intercept
- 20.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical lead intercept from the Nancy April zone, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical lead mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“1.08% Pb”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MM-294-03Nancy April zone · zincGrade: 3.02Grade Unit: %Intercept: 20.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-294-03
- Project
- Nancy April zone
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 3.02
- Grade Unit
- %
- Intercept
- 20.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical high-grade zinc intercept from the Nancy April zone, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical high-grade zinc mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“3.02% Zn”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MM-294-03Nancy April zone · silverGrade: 3.43Grade Unit: g/tIntercept: 20.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-294-03
- Project
- Nancy April zone
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 3.43
- Grade Unit
- g/t
- Intercept
- 20.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical silver intercept from the Nancy April zone, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical silver mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“3.43 g/t Ag”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Fact 23Mary March · zincGrade: 10.1Grade Unit: %Intercept: 9.63 mHistorical resultNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Mary March
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 10.1
- Grade Unit
- %
- Intercept
- 9.63 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1999-01-01T00:00:00.000Z
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical high-grade zinc intercept from the 1999 discovery, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical high-grade zinc mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“9.63 m grading 10.1% zinc”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Fact 24Mary March · leadGrade: 1.8Grade Unit: %Intercept: 9.63 mHistorical resultNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Mary March
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.8
- Grade Unit
- %
- Intercept
- 9.63 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1999-01-01T00:00:00.000Z
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical lead intercept from the 1999 discovery, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical lead mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“1.8% lead”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Fact 25Mary March · copperGrade: 0.64Grade Unit: %Intercept: 9.63 mHistorical resultNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Mary March
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 9.63 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1999-01-01T00:00:00.000Z
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical copper intercept from the 1999 discovery, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical copper mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“0.64% copper”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Fact 26Mary March · silverGrade: 122Grade Unit: g/tIntercept: 9.63 mHistorical resultNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Mary March
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 122
- Grade Unit
- g/t
- Intercept
- 9.63 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1999-01-01T00:00:00.000Z
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical high-grade silver intercept from the 1999 discovery, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical high-grade silver mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“122 g/t silver”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Fact 27Mary March · goldGrade: 4.2Grade Unit: g/tIntercept: 9.63 mHistorical resultNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Mary March
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 4.2
- Grade Unit
- g/t
- Intercept
- 9.63 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1999-01-01T00:00:00.000Z
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This is a historical high-grade gold intercept from the 1999 discovery, providing context for potential mineralization but not representing current compliant data.
Positive factors
- Historical high-grade gold mineralization identified
Negative factors
- Historical data, not NI 43-101 compliant
- QP has not classified as current resource
Evidence · text
“4.2 g/t gold”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MM-26-42government research describes the Mary March alteration · copperGrade: 0.07Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 467.4 m
- To
- 469 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-469
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.09Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 467.4 m
- To
- 469 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-469
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.33Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 467.4 m
- To
- 469 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-469
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.33 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.33 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.33”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.34Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 467.4 m
- To
- 469 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-469
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.34 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 9.7Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 9.7
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 467.4 m
- To
- 469 m
- Hole Depth
- 576 m
- Intercept Depth
- 467.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:467.4-469
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 9.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 15.5 g/t·m is below.
Negative factors
- 9.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.7”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1 m
- From
- 469 m
- To
- 470 m
- Hole Depth
- 576 m
- Intercept Depth
- 469 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:469-470
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.1 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 469 m
- To
- 470 m
- Hole Depth
- 576 m
- Intercept Depth
- 469 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:469-470
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.19Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 1 m
- From
- 469 m
- To
- 470 m
- Hole Depth
- 576 m
- Intercept Depth
- 469 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:469-470
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.34Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 469 m
- To
- 470 m
- Hole Depth
- 576 m
- Intercept Depth
- 469 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:469-470
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.34 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 6.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 6.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 469 m
- To
- 470 m
- Hole Depth
- 576 m
- Intercept Depth
- 469 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:469-470
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 6.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.1 g/t·m is below.
Negative factors
- 6.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.1”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 470 m
- To
- 471 m
- Hole Depth
- 576 m
- Intercept Depth
- 470 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:470-471
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 470 m
- To
- 471 m
- Hole Depth
- 576 m
- Intercept Depth
- 470 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:470-471
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.09Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 470 m
- To
- 471 m
- Hole Depth
- 576 m
- Intercept Depth
- 470 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:470-471
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.42Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 470 m
- To
- 471 m
- Hole Depth
- 576 m
- Intercept Depth
- 470 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:470-471
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.42 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 6.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 6.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 470 m
- To
- 471 m
- Hole Depth
- 576 m
- Intercept Depth
- 470 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:470-471
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 6.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.6 g/t·m is below.
Negative factors
- 6.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.6”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 471 m
- To
- 472 m
- Hole Depth
- 576 m
- Intercept Depth
- 471 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:471-472
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 471 m
- To
- 472 m
- Hole Depth
- 576 m
- Intercept Depth
- 471 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:471-472
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.05Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1 m
- From
- 471 m
- To
- 472 m
- Hole Depth
- 576 m
- Intercept Depth
- 471 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:471-472
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.55Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 471 m
- To
- 472 m
- Hole Depth
- 576 m
- Intercept Depth
- 471 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:471-472
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.55 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 11.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 11.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 471 m
- To
- 472 m
- Hole Depth
- 576 m
- Intercept Depth
- 471 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:471-472
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 11.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 11.1 g/t·m is below.
Negative factors
- 11.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.1”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.03Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 472 m
- To
- 473.25 m
- Hole Depth
- 576 m
- Intercept Depth
- 472 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:472-473.25
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.03Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 472 m
- To
- 473.25 m
- Hole Depth
- 576 m
- Intercept Depth
- 472 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:472-473.25
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.08Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 472 m
- To
- 473.25 m
- Hole Depth
- 576 m
- Intercept Depth
- 472 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:472-473.25
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.08 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.5Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 472 m
- To
- 473.25 m
- Hole Depth
- 576 m
- Intercept Depth
- 472 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:472-473.25
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.5 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 6.5Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 6.5
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 472 m
- To
- 473.25 m
- Hole Depth
- 576 m
- Intercept Depth
- 472 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:472-473.25
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 6.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.1 g/t·m is below.
Negative factors
- 6.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.5”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.39Grade Unit: %Intercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 0.75 m
- From
- 473.25 m
- To
- 474 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-474
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.39 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.39 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.39”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 1.04Grade Unit: %Intercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.04
- Grade Unit
- %
- Intercept
- 0.75 m
- From
- 473.25 m
- To
- 474 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-474
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.04 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 0.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.04”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 4.63Grade Unit: %Intercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 4.63
- Grade Unit
- %
- Intercept
- 0.75 m
- From
- 473.25 m
- To
- 474 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-474
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 4.63 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.63”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.71Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 0.75 m
- From
- 473.25 m
- To
- 474 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-474
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.71 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.71 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.71”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 11.3Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 11.3
- Grade Unit
- g/t
- Intercept
- 0.75 m
- From
- 473.25 m
- To
- 474 m
- Hole Depth
- 576 m
- Intercept Depth
- 473.25 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:473.25-474
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 11.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.5 g/t·m is below.
Negative factors
- 11.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.3”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.98Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 1 m
- From
- 474 m
- To
- 475 m
- Hole Depth
- 576 m
- Intercept Depth
- 474 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:474-475
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.98 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.0 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.98”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 1.59Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.59
- Grade Unit
- %
- Intercept
- 1 m
- From
- 474 m
- To
- 475 m
- Hole Depth
- 576 m
- Intercept Depth
- 474 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:474-475
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.59 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.59”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 4.4Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 4.4
- Grade Unit
- %
- Intercept
- 1 m
- From
- 474 m
- To
- 475 m
- Hole Depth
- 576 m
- Intercept Depth
- 474 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:474-475
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 4.4 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 4.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.40”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.98Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 474 m
- To
- 475 m
- Hole Depth
- 576 m
- Intercept Depth
- 474 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:474-475
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.98 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 0.98 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.98”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 21.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 21.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 474 m
- To
- 475 m
- Hole Depth
- 576 m
- Intercept Depth
- 474 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:474-475
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 21.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 21.2 g/t·m is below.
Negative factors
- 21.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“21.2”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.66Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 1 m
- From
- 475 m
- To
- 476 m
- Hole Depth
- 576 m
- Intercept Depth
- 475 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:475-476
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.66 % copper is weak against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.66”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 2.53Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 2.53
- Grade Unit
- %
- Intercept
- 1 m
- From
- 475 m
- To
- 476 m
- Hole Depth
- 576 m
- Intercept Depth
- 475 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:475-476
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 2.53 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.53”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 6.53Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 6.53
- Grade Unit
- %
- Intercept
- 1 m
- From
- 475 m
- To
- 476 m
- Hole Depth
- 576 m
- Intercept Depth
- 475 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:475-476
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 6.53 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 6.5 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.53”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 1.61Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.61
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 475 m
- To
- 476 m
- Hole Depth
- 576 m
- Intercept Depth
- 475 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:475-476
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.61 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 1.61 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.61”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 34.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 34.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 475 m
- To
- 476 m
- Hole Depth
- 576 m
- Intercept Depth
- 475 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:475-476
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 34.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 34.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“34.3”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 1.66Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.66
- Grade Unit
- %
- Intercept
- 1 m
- From
- 476 m
- To
- 477 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:476-477
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.66 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.7 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 1.66 % copper is strong on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.66”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 1.4Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.4
- Grade Unit
- %
- Intercept
- 1 m
- From
- 476 m
- To
- 477 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:476-477
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.4 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.40”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 4.41Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 4.41
- Grade Unit
- %
- Intercept
- 1 m
- From
- 476 m
- To
- 477 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:476-477
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 4.41 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 4.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.41”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 1.13Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 476 m
- To
- 477 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:476-477
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.13 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 1.13 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.13”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 36.7Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 36.7
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 476 m
- To
- 477 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:476-477
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 36.7 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 36.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“36.7”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 2.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 2.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 477 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 477 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:477-478
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 2.03 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 2.0 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.03 % copper is strong on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.03”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 1.85Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.85
- Grade Unit
- %
- Intercept
- 1 m
- From
- 477 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 477 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:477-478
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.85 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.85”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 3.76Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 3.76
- Grade Unit
- %
- Intercept
- 1 m
- From
- 477 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 477 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:477-478
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 3.76 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.76”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 1.19Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.19
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 477 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 477 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:477-478
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.19 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.2 g/t·m is below.
Negative factors
- 1.19 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.19”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 47.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 47.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 477 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 477 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:477-478
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 47.6 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 47.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“47.6”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 2.74Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 2.74
- Grade Unit
- %
- Intercept
- 1 m
- From
- 478 m
- To
- 479 m
- Hole Depth
- 576 m
- Intercept Depth
- 478 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:478-479
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 2.74 % copper is exceptional against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 2.7 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 2.74 % copper is exceptional on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.74”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.34Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 1 m
- From
- 478 m
- To
- 479 m
- Hole Depth
- 576 m
- Intercept Depth
- 478 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:478-479
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.34 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.69Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.69
- Grade Unit
- %
- Intercept
- 1 m
- From
- 478 m
- To
- 479 m
- Hole Depth
- 576 m
- Intercept Depth
- 478 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:478-479
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.69 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.69 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.69”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.76Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 478 m
- To
- 479 m
- Hole Depth
- 576 m
- Intercept Depth
- 478 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:478-479
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.76 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 34.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 34.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 478 m
- To
- 479 m
- Hole Depth
- 576 m
- Intercept Depth
- 478 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:478-479
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 34.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 34.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“34.3”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 1.05Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.05
- Grade Unit
- %
- Intercept
- 2 m
- From
- 479 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 479 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:479-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.05 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 2.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.05”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.97Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 2 m
- From
- 479 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 479 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:479-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.97 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.97 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.97”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 3.13Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 3.13
- Grade Unit
- %
- Intercept
- 2 m
- From
- 479 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 479 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:479-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 3.13 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 6.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.13”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.82Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 479 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 479 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:479-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.82 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 0.82 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.82”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 22.2Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 22.2
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 479 m
- To
- 481 m
- Hole Depth
- 576 m
- Intercept Depth
- 479 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:479-481
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 22.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 44.4 g/t·m is below.
Negative factors
- 22.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“22.2”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.33Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 1 m
- From
- 481 m
- To
- 482 m
- Hole Depth
- 576 m
- Intercept Depth
- 481 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:481-482
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.33 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.33 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.33”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.5Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 1 m
- From
- 481 m
- To
- 482 m
- Hole Depth
- 576 m
- Intercept Depth
- 481 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:481-482
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.5 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 1.56Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 1.56
- Grade Unit
- %
- Intercept
- 1 m
- From
- 481 m
- To
- 482 m
- Hole Depth
- 576 m
- Intercept Depth
- 481 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:481-482
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.56 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.6 %·m is below.
Negative factors
- 1.56 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.56”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.43Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 481 m
- To
- 482 m
- Hole Depth
- 576 m
- Intercept Depth
- 481 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:481-482
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.43 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.43 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.43”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 13.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 13.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 481 m
- To
- 482 m
- Hole Depth
- 576 m
- Intercept Depth
- 481 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:481-482
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 13.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 13.1 g/t·m is below.
Negative factors
- 13.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.1”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · copperGrade: 0.18Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 1 m
- From
- 482 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 482 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:482-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.18 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · leadGrade: 0.19Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 1 m
- From
- 482 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 482 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:482-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.19 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · zincGrade: 0.78Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 1 m
- From
- 482 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 482 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:482-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.78 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.78 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.78”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · goldGrade: 0.37Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 482 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 482 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:482-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.37 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MM-26-42government research describes the Mary March alteration · silverGrade: 9Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MM-26-42
- Project
- government research describes the Mary March alteration
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- ROX
Geometry
- Grade
- 9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 482 m
- To
- 483 m
- Hole Depth
- 576 m
- Intercept Depth
- 482 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- MM-26-42:482-483
- Mining Method
- underground
Location
- Easting
- 534326
- Northing
- 5408892
- CRS
- NAD27, UTM Zone 21N
- Elevation
- 191 m
- Azimuth
- 140.5 °
- Dip
- -68.31 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: Expanded from assay table. 9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.0 g/t·m is below.
Negative factors
- 9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.0”
Context: Table 2: MM-26-42 sample-by-sample assay
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.