Canterra Minerals Extends Lundberg Deposit with 86m of 0.91% CuEq at Buchans Project, Newfoundland
Original announcement by tmx on
- Company
- Canterra Minerals Corporation
- Ticker
- CTM
- Exchange
- TSX
- Region
- Newfoundland
- Primary commodity
- Copper
- Secondary commodities
- Zinc, Lead, Silver, Gold
- Document categories
- Drill results
- Extracted
- 2026-09-15 19:04:30 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Canterra Minerals announced drill results from its 2025 program at the Buchans Project in Newfoundland, extending the Lundberg Deposit with an 86-meter intercept grading 0.91% CuEq. This result, including higher-grade sub-intervals, confirms depth continuity and supports potential resource expansion. The company also reported successful step-out drilling at Clementine and Lundberg, validating its 3DIP targeting approach and outlining a fully funded 2026 drill program focused on high-conviction targets.
Reasoning: Canterra Minerals reported strong drill results from its Buchans Project, highlighted by a significant 86-meter copper-equivalent intercept that extends the Lundberg deposit at depth. The program successfully validated new targeting methods and confirmed continuity, supporting future resource expansion in a high-grade VMS camp. While some holes returned no significant values, the overall program demonstrates positive progress and exploration potential.
Positive factors
- Significant depth extension of Lundberg deposit with broad mineralization
- High-grade sub-intervals within the broad Lundberg intercept
- Step-out drilling confirms lateral and down-plunge continuity at Lundberg and Clementine
- Validation of 3DIP targeting approach for new discoveries
- Comprehensive QA/QC protocols with certified lab and QP sign-off
- Metal equivalent assumptions fully disclosed
Negative factors
- True width is an estimate (80-90% of core length) rather than precisely measured
- Several holes returned no significant values, indicating exploration risk
Facts used in scoring: 75
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details comprehensive QA/QC protocols including certified lab analysis by SGS Canada, use of standards, blanks, and duplicates, and independent check assays by ALS Geochemistry, with sign-off by a Qualified Person.
Evidence · text
“Samples were submitted in sealed plastic bags delivered by Canterra personnel to SGS Canada’s preparatory facility in Grand Falls-Windsor, Newfoundland. Sample batches consisted of core samples, control standards, blanks and duplicates. Once prepared, pulps (SGS procedure code PRP89) were shipped to SGS Canada's laboratory in Burnaby, BC to be homogenized and subsequently analyzed for multi-element assays (including Cu, Pb, Zn, Ag and Au) using sodium peroxide fusion with ICP-OES finish (codes GE_ICP90A50 for Cu, Pb, Zn, Ag, GE_AAS42E50 for Ag by 4-acid digestion by AAS, and GE_FAA30V5 for Au by 30g Fire Assay by AAS). Overlimit assays were completed as necessary by pyrosulphate fusion/XRF for Cu, Pb, Zn (code GO_XRF70V) and Ag by 30g Fire Assay, gravimetric (code GO_FAG37V). SGS Natural Resources analytical laboratories operate under a Quality Management System that complies with ISO/IEC 17025. SGS Canada minerals laboratory in Burnaby is accredited by the Standards Council of Canada (SCC) for specific mineral tests listed on the scope of accreditation to the ISO/IEC 17025 standard. Further details regarding SGS procedures are available at SGS Analytical Methods . Canterra also submits representative pulps to ALS Geochemistry’s laboratory in Moncton New Brunswick for additional independent check assays. Qualified Person Paul Moore MSc. P.Geo. (NL), Vice President of Exploration for Canterra Minerals Corporation, a Qualified Person within the meaning of National Instrument 43-101, has reviewed and approved the technical disclosure in this news release.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: The metal equivalent calculation is fully disclosed, including metal prices and recoveries for all constituent metals.
Evidence · text
“Copper Equivalent % = Cu% + ((Pb% * 22.046 * Pb Rec.* Pb price) + (Zn% * 22.046 * Zn Rec. * Zn price) + (Ag g/t/31.10348 * Ag Rec. * Ag price) + (Au g/t/31.10348 * Au Rec. * Au Price))/(Cu Price * 22.046 * Cu Rec.)). Metal recoveries (Rec.) to concentrate are 90.41% Zn, 91.32% Pb, 91.14% Cu, 32.12% Au & 72.87% Ag based on “Centralized Milling of Newfoundland Base Metal Deposits - Bench Scale DMS and Flotation Test Program” (Thibault & Associates Inc., 2017). Prices used are Cu 4.54$US/lb, Pb 0.88$/lb, Zn 1.35 $US/lb, Ag 42.55 $US/oz, Au 3692.80 $US/oz as of September 16, 2025.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Hole H-25-3553 was drilled 50 m north of H-25-3542, intersecting mineralization and confirming continuation of the system down dip, and H-25-3552 was a 50 m step-out confirming down-plunge continuity.
Evidence · text
“Step-Out Success Demonstrates Lateral Continuity: Hole H-25-3553, drilled 50 m north of H-25-3542, intersected 7.0 m of stockwork grading 0.47% CuEq, confirming continuation of the system down dip (Figure 2). Clementine Extension: A 50 m step-out hole (H-25-3552) intersected 3.45 m grading 1.09% CuEq, supporting down-plunge continuity (Figure 1).”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document states that true widths are estimated to be ~80-90% of reported core lengths, but does not provide specific true width calculations for each intercept.
Evidence · text
“True widths estimated to be a ~80-90% of reported core lengths.”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: The first reported intercept for H-25-3542 (4.45 m grading 7.73% CuEq) is explicitly stated as 'previously released' in the text and table.
Evidence · text
“The upper portion of H-25-3542 intersected 4.45 m grading 7.73% CuEq ( previously released )”
Extracted facts
Stored fact records: 75. Some facts used in scoring do not have a stored record.
Drill Results (75)
H-25-3542Buchans · copperGrade: 1.11Grade Unit: %Intercept: 4.45 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.11
- Grade Unit
- %
- Intercept
- 4.45 m
- From
- 188.9 m
- To
- 193.35 m
- Hole Depth
- 351 m
- Intercept Depth
- 188.9 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:188.9-193.35
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.73
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-19T00:00:00.000Z
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a good copper intercept for a VMS deposit, but its novelty is low as it was previously released.
Positive factors
- High copper grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Result is historical and previously released
Evidence · table
“1.11”
Context: 4.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · zincGrade: 11.38Grade Unit: %Intercept: 4.45 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 11.38
- Grade Unit
- %
- Intercept
- 4.45 m
- From
- 188.9 m
- To
- 193.35 m
- Hole Depth
- 351 m
- Intercept Depth
- 188.9 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:188.9-193.35
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.73
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-19T00:00:00.000Z
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is an exceptional zinc intercept for a VMS deposit, but its novelty is low as it was previously released.
Positive factors
- Exceptional zinc grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Result is historical and previously released
Evidence · table
“11.38”
Context: 4.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · leadGrade: 7.02Grade Unit: %Intercept: 4.45 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 7.02
- Grade Unit
- %
- Intercept
- 4.45 m
- From
- 188.9 m
- To
- 193.35 m
- Hole Depth
- 351 m
- Intercept Depth
- 188.9 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:188.9-193.35
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.73
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-19T00:00:00.000Z
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a strong lead intercept for a VMS deposit, but its novelty is low as it was previously released.
Positive factors
- Strong lead grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Result is historical and previously released
Evidence · table
“7.02”
Context: 4.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · silverGrade: 125.48Grade Unit: g/tIntercept: 4.45 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 125.48
- Grade Unit
- g/t
- Intercept
- 4.45 m
- From
- 188.9 m
- To
- 193.35 m
- Hole Depth
- 351 m
- Intercept Depth
- 188.9 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:188.9-193.35
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.73
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-19T00:00:00.000Z
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a moderate silver intercept for a VMS deposit, but its novelty is low as it was previously released.
Positive factors
- Moderate silver grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Result is historical and previously released
Evidence · table
“125.48”
Context: 4.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · goldGrade: 1.24Grade Unit: g/tIntercept: 4.45 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 4.45 m
- From
- 188.9 m
- To
- 193.35 m
- Hole Depth
- 351 m
- Intercept Depth
- 188.9 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:188.9-193.35
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.73
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-19T00:00:00.000Z
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a moderate gold intercept for a VMS deposit, but its novelty is low as it was previously released.
Positive factors
- Moderate gold grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Result is historical and previously released
Evidence · table
“1.24”
Context: 4.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · copperGrade: 0.36Grade Unit: %Intercept: 86 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-316
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length and moderate copper equivalent grade, significantly extending the Lundberg deposit at depth.
Positive factors
- Exceptional intercept length (86m)
- Moderate copper equivalent grade for VMS deposit type
- Extends known mineralization at depth
- Comprehensive QA/QC disclosure
Evidence · table
“0.36”
Context: 86.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · zincGrade: 1.19Grade Unit: %Intercept: 86 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.19
- Grade Unit
- %
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-316
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length, contributing to the overall copper equivalent grade and extending the Lundberg deposit at depth.
Positive factors
- Exceptional intercept length (86m)
- Weak zinc grade for VMS deposit type
- Extends known mineralization at depth
- Comprehensive QA/QC disclosure
Evidence · table
“1.19”
Context: 86.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · leadGrade: 0.69Grade Unit: %Intercept: 86 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.69
- Grade Unit
- %
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-316
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length, contributing to the overall copper equivalent grade and extending the Lundberg deposit at depth.
Positive factors
- Exceptional intercept length (86m)
- Weak lead grade for VMS deposit type
- Extends known mineralization at depth
- Comprehensive QA/QC disclosure
Evidence · table
“0.69”
Context: 86.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · silverGrade: 4.18Grade Unit: g/tIntercept: 86 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 4.18
- Grade Unit
- g/t
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-316
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length, contributing to the overall copper equivalent grade and extending the Lundberg deposit at depth.
Positive factors
- Exceptional intercept length (86m)
- Weak silver grade for VMS deposit type
- Extends known mineralization at depth
- Comprehensive QA/QC disclosure
Evidence · table
“4.18”
Context: 86.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · goldGrade: 0.05Grade Unit: g/tIntercept: 86 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-316
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length, contributing to the overall copper equivalent grade and extending the Lundberg deposit at depth.
Positive factors
- Exceptional intercept length (86m)
- Weak gold grade for VMS deposit type
- Extends known mineralization at depth
- Comprehensive QA/QC disclosure
Evidence · table
“0.05”
Context: 86.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · copperGrade: 1.42Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.42
- Grade Unit
- %
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-236
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong copper equivalent grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Evidence · table
“1.42”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · zincGrade: 4.03Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 4.03
- Grade Unit
- %
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-236
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Weak zinc grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Evidence · table
“4.03”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · leadGrade: 3.32Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 3.32
- Grade Unit
- %
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-236
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong lead grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Evidence · table
“3.32”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · silverGrade: 12.68Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 12.68
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-236
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Weak silver grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Evidence · table
“12.68”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · goldGrade: 0.07Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:230-236
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Weak gold grade for VMS deposit type
- Good intercept length
- Comprehensive QA/QC disclosure
Evidence · table
“0.07”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · copperGrade: 0.23Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:250-272
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong intercept length (22m)
- Moderate copper equivalent grade for VMS deposit type
- Comprehensive QA/QC disclosure
Evidence · table
“0.23”
Context: 22.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · zincGrade: 2.23Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 2.23
- Grade Unit
- %
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:250-272
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong intercept length (22m)
- Weak zinc grade for VMS deposit type
- Comprehensive QA/QC disclosure
Evidence · table
“2.23”
Context: 22.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · leadGrade: 1.18Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.18
- Grade Unit
- %
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:250-272
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong intercept length (22m)
- Weak lead grade for VMS deposit type
- Comprehensive QA/QC disclosure
Evidence · table
“1.18”
Context: 22.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · silverGrade: 5.32Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 5.32
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:250-272
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong intercept length (22m)
- Weak silver grade for VMS deposit type
- Comprehensive QA/QC disclosure
Evidence · table
“5.32”
Context: 22.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3542Buchans · goldGrade: 0.06Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- H-25-3542
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Hole Depth
- 351 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3542:250-272
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408154
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This high-grade sub-interval within the broader Lundberg intercept is a positive result, indicating strong mineralization.
Positive factors
- Strong intercept length (22m)
- Weak gold grade for VMS deposit type
- Comprehensive QA/QC disclosure
Evidence · table
“0.06”
Context: 22.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · copperGrade: 0.15Grade Unit: %Intercept: 3.45 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 3.45 m
- From
- 354 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:354-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-plunge continuity at Clementine, which is a positive exploration result.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Confirms down-plunge continuity
- Comprehensive QA/QC disclosure
Evidence · table
“0.15”
Context: 3.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · zincGrade: 1.7Grade Unit: %Intercept: 3.45 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 3.45 m
- From
- 354 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:354-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-plunge continuity at Clementine, which is a positive exploration result.
Positive factors
- Weak zinc grade for VMS deposit type
- Confirms down-plunge continuity
- Comprehensive QA/QC disclosure
Evidence · table
“1.70”
Context: 3.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · leadGrade: 1.01Grade Unit: %Intercept: 3.45 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 3.45 m
- From
- 354 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:354-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-plunge continuity at Clementine, which is a positive exploration result.
Positive factors
- Weak lead grade for VMS deposit type
- Confirms down-plunge continuity
- Comprehensive QA/QC disclosure
Evidence · table
“1.01”
Context: 3.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · silverGrade: 17.24Grade Unit: g/tIntercept: 3.45 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 17.24
- Grade Unit
- g/t
- Intercept
- 3.45 m
- From
- 354 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:354-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-plunge continuity at Clementine, which is a positive exploration result.
Positive factors
- Weak silver grade for VMS deposit type
- Confirms down-plunge continuity
- Comprehensive QA/QC disclosure
Evidence · table
“17.24”
Context: 3.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · goldGrade: 0.14Grade Unit: g/tIntercept: 3.45 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 3.45 m
- From
- 354 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:354-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-plunge continuity at Clementine, which is a positive exploration result.
Positive factors
- Weak gold grade for VMS deposit type
- Confirms down-plunge continuity
- Comprehensive QA/QC disclosure
Evidence · table
“0.14”
Context: 3.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · copperGrade: 0.18Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:356.75-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Clementine.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“0.18”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · zincGrade: 2.5Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 2.5
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:356.75-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Clementine.
Positive factors
- Weak zinc grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“2.50”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · leadGrade: 1.41Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.41
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:356.75-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Clementine.
Positive factors
- Weak lead grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“1.41”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · silverGrade: 22.9Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 22.9
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:356.75-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Clementine.
Positive factors
- Weak silver grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“22.90”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3552Buchans · goldGrade: 0.21Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- H-25-3552
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Hole Depth
- 400 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3552:356.75-357.45
- Mining Method
- unknown
Location
- Location
- Clementine
- Easting
- 505675
- Northing
- 5408750
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 357 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Clementine.
Positive factors
- Weak gold grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“0.21”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · copperGrade: 0.15Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 7 m
- From
- 296 m
- To
- 303 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:296-303
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-dip continuity at Lundberg, which is a positive exploration result despite the weak grade.
Positive factors
- Confirms down-dip continuity at Lundberg
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Weak copper equivalent grade for VMS deposit type
Evidence · table
“0.15”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · zincGrade: 0.9Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.9
- Grade Unit
- %
- Intercept
- 7 m
- From
- 296 m
- To
- 303 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:296-303
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-dip continuity at Lundberg, which is a positive exploration result despite the weak grade.
Positive factors
- Confirms down-dip continuity at Lundberg
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Weak zinc grade for VMS deposit type
Evidence · table
“0.90”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · leadGrade: 0.11Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 7 m
- From
- 296 m
- To
- 303 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:296-303
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-dip continuity at Lundberg, which is a positive exploration result despite the weak grade.
Positive factors
- Confirms down-dip continuity at Lundberg
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Weak lead grade for VMS deposit type
Evidence · table
“0.11”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · silverGrade: 1.34Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 296 m
- To
- 303 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:296-303
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-dip continuity at Lundberg, which is a positive exploration result despite the weak grade.
Positive factors
- Confirms down-dip continuity at Lundberg
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Weak silver grade for VMS deposit type
Evidence · table
“1.34”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · goldGrade: 0.05Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 296 m
- To
- 303 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:296-303
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept confirms down-dip continuity at Lundberg, which is a positive exploration result despite the weak grade.
Positive factors
- Confirms down-dip continuity at Lundberg
- Good intercept length
- Comprehensive QA/QC disclosure
Negative factors
- Weak gold grade for VMS deposit type
Evidence · table
“0.05”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · copperGrade: 0.66Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:300-301
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Lundberg.
Positive factors
- Moderate copper equivalent grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“0.66”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · zincGrade: 3.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 3.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:300-301
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Lundberg.
Positive factors
- Weak zinc grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“3.73”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · leadGrade: 0.11Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:300-301
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Lundberg.
Positive factors
- Weak lead grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“0.11”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · silverGrade: 3.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:300-301
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Lundberg.
Positive factors
- Weak silver grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“3.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3553Buchans · goldGrade: 0.13Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3553
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Hole Depth
- 342 m
- Intercept Depth
- 296 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3553:300-301
- Mining Method
- unknown
Location
- Location
- Lundberg
- Easting
- 509675
- Northing
- 5408203
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, moderate-grade sub-interval contributes to the overall positive result at Lundberg.
Positive factors
- Weak gold grade for VMS deposit type
- Comprehensive QA/QC disclosure
Negative factors
- Narrow intercept length
Evidence · table
“0.13”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3554Buchans · copperGrade: 0.1Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- H-25-3554
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 177.15 m
- To
- 178 m
- Hole Depth
- 325 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3554:177.15-178
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509625
- Northing
- 5408144
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.58
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization in the Two Level horizon, but its overall impact is limited.
Positive factors
- Confirms mineralization within Two Level horizon
- Comprehensive QA/QC disclosure
Negative factors
- Weak copper equivalent grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.10”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3554Buchans · zincGrade: 0.56Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- H-25-3554
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.56
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 177.15 m
- To
- 178 m
- Hole Depth
- 325 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3554:177.15-178
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509625
- Northing
- 5408144
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.58
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization in the Two Level horizon, but its overall impact is limited.
Positive factors
- Confirms mineralization within Two Level horizon
- Comprehensive QA/QC disclosure
Negative factors
- Weak zinc grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.56”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3554Buchans · leadGrade: 0.29Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- H-25-3554
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 177.15 m
- To
- 178 m
- Hole Depth
- 325 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3554:177.15-178
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509625
- Northing
- 5408144
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.58
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization in the Two Level horizon, but its overall impact is limited.
Positive factors
- Confirms mineralization within Two Level horizon
- Comprehensive QA/QC disclosure
Negative factors
- Weak lead grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.29”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3554Buchans · silverGrade: 15.5Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- H-25-3554
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 15.5
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 177.15 m
- To
- 178 m
- Hole Depth
- 325 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3554:177.15-178
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509625
- Northing
- 5408144
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.58
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization in the Two Level horizon, but its overall impact is limited.
Positive factors
- Confirms mineralization within Two Level horizon
- Comprehensive QA/QC disclosure
Negative factors
- Weak silver grade for VMS deposit type
- Narrow intercept length
Evidence · table
“15.50”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3554Buchans · goldGrade: 0.22Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- H-25-3554
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 177.15 m
- To
- 178 m
- Hole Depth
- 325 m
- Intercept Depth
- 177.15 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3554:177.15-178
- Mining Method
- unknown
Location
- Location
- Two Level
- Easting
- 509625
- Northing
- 5408144
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 180 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.58
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization in the Two Level horizon, but its overall impact is limited.
Positive factors
- Confirms mineralization within Two Level horizon
- Comprehensive QA/QC disclosure
Negative factors
- Weak gold grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.22”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3555Buchans · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3555
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 231 m
- To
- 232 m
- Hole Depth
- 478 m
- Intercept Depth
- 231 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3555:231-232
- Mining Method
- unknown
Location
- Location
- Sandfill
- Easting
- 512131
- Northing
- 5409190
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization at the Sandfill prospect, but its overall impact is limited.
Positive factors
- Confirms mineralization coincident with chargeability anomaly
- Comprehensive QA/QC disclosure
Negative factors
- Weak copper equivalent grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.01”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3555Buchans · zincGrade: 0.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3555
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 231 m
- To
- 232 m
- Hole Depth
- 478 m
- Intercept Depth
- 231 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3555:231-232
- Mining Method
- unknown
Location
- Location
- Sandfill
- Easting
- 512131
- Northing
- 5409190
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization at the Sandfill prospect, but its overall impact is limited.
Positive factors
- Confirms mineralization coincident with chargeability anomaly
- Comprehensive QA/QC disclosure
Negative factors
- Weak zinc grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3555Buchans · leadGrade: 0.15Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3555
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 1 m
- From
- 231 m
- To
- 232 m
- Hole Depth
- 478 m
- Intercept Depth
- 231 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3555:231-232
- Mining Method
- unknown
Location
- Location
- Sandfill
- Easting
- 512131
- Northing
- 5409190
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization at the Sandfill prospect, but its overall impact is limited.
Positive factors
- Confirms mineralization coincident with chargeability anomaly
- Comprehensive QA/QC disclosure
Negative factors
- Weak lead grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.15”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3555Buchans · silverGrade: 18.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3555
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 18.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 231 m
- To
- 232 m
- Hole Depth
- 478 m
- Intercept Depth
- 231 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3555:231-232
- Mining Method
- unknown
Location
- Location
- Sandfill
- Easting
- 512131
- Northing
- 5409190
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization at the Sandfill prospect, but its overall impact is limited.
Positive factors
- Confirms mineralization coincident with chargeability anomaly
- Comprehensive QA/QC disclosure
Negative factors
- Weak silver grade for VMS deposit type
- Narrow intercept length
Evidence · table
“18.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
H-25-3555Buchans · goldGrade: 0.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H-25-3555
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 231 m
- To
- 232 m
- Hole Depth
- 478 m
- Intercept Depth
- 231 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- H-25-3555:231-232
- Mining Method
- unknown
Location
- Location
- Sandfill
- Easting
- 512131
- Northing
- 5409190
- CRS
- UTM NAD83 Zone 21
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This narrow, weak-grade intercept confirms mineralization at the Sandfill prospect, but its overall impact is limited.
Positive factors
- Confirms mineralization coincident with chargeability anomaly
- Comprehensive QA/QC disclosure
Negative factors
- Weak gold grade for VMS deposit type
- Narrow intercept length
Evidence · table
“0.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
andThe 2025 results confirm depth continuity of the Lundberg · copperGrade: 0.36Grade Unit: %Intercept: 86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- The 2025 results confirm depth continuity of the Lundberg
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:230-316
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.36 % copper is weak against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 31.0 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.36”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andThe 2025 results confirm depth continuity of the Lundberg · zincGrade: 1.19Grade Unit: %Intercept: 86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- The 2025 results confirm depth continuity of the Lundberg
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.19
- Grade Unit
- %
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:230-316
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 1.19 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 102.3 %·m is strong (grade alone is below; the better of the two is used).
Positive factors
- 1.19 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.19”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andThe 2025 results confirm depth continuity of the Lundberg · leadGrade: 0.69Grade Unit: %Intercept: 86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- The 2025 results confirm depth continuity of the Lundberg
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.69
- Grade Unit
- %
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:230-316
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.69 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 59.3 %·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.69”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andThe 2025 results confirm depth continuity of the Lundberg · silverGrade: 4.2Grade Unit: g/tIntercept: 86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- The 2025 results confirm depth continuity of the Lundberg
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 4.2
- Grade Unit
- g/t
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:230-316
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 4.2 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 361.2 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.2”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andThe 2025 results confirm depth continuity of the Lundberg · goldGrade: 0.05Grade Unit: g/tIntercept: 86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- The 2025 results confirm depth continuity of the Lundberg
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 86 m
- From
- 230 m
- To
- 316 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:230-316
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.91
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.3 g/t·m is below.
Negative factors
- 0.05 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · copperGrade: 1.42Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.42
- Grade Unit
- %
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:230-236
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 1.42 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 8.5 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.42”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · zincGrade: 4.03Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 4.03
- Grade Unit
- %
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:230-236
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 4.03 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 24.2 %·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.03”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · leadGrade: 3.32Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 3.32
- Grade Unit
- %
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:230-236
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 3.32 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 19.9 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.32”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · silverGrade: 12.7Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 12.7
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:230-236
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 12.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 76.2 g/t·m is below.
Negative factors
- 12.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.7”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · goldGrade: 0.07Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 230 m
- To
- 236 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:230-236
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · copperGrade: 0.23Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Intercept Depth
- 250 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:250-272
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 5.1 %·m is below.
Negative factors
- 0.23 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · zincGrade: 2.23Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 2.23
- Grade Unit
- %
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Intercept Depth
- 250 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:250-272
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 2.23 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 49.1 %·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.23”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · leadGrade: 1.18Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.18
- Grade Unit
- %
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Intercept Depth
- 250 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:250-272
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 1.18 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 26.0 %·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.18”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · silverGrade: 5.3Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 5.3
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Intercept Depth
- 250 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:250-272
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 5.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 116.6 g/t·m is below.
Negative factors
- 5.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.3”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · goldGrade: 0.06Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 250 m
- To
- 272 m
- Intercept Depth
- 250 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:250-272
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.3 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · copperGrade: 0.18Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Intercept Depth
- 356.75 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:356.75-357.45
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.18 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · zincGrade: 2.5Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 2.5
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Intercept Depth
- 356.75 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:356.75-357.45
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 2.5 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.50”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · leadGrade: 1.41Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 1.41
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Intercept Depth
- 356.75 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:356.75-357.45
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 1.41 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.41”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · silverGrade: 22.9Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 22.9
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Intercept Depth
- 356.75 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:356.75-357.45
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 22.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 16.0 g/t·m is below.
Negative factors
- 22.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“22.9”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · goldGrade: 0.21Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 356.75 m
- To
- 357.45 m
- Intercept Depth
- 356.75 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:356.75-357.45
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · copperGrade: 0.66Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Intercept Depth
- 300 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:300-301
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.66 % copper is weak against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.66”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · zincGrade: 3.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 3.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Intercept Depth
- 300 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:300-301
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 3.73 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.73”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · leadGrade: 0.11Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- lead
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Intercept Depth
- 300 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:300-301
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.11 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · silverGrade: 3.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Intercept Depth
- 300 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:300-301
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 3.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.3 g/t·m is below.
Negative factors
- 3.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.3”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Buchans · goldGrade: 0.13Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Buchans
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- CTM
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 300 m
- To
- 301 m
- Intercept Depth
- 300 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- incl.:300-301
- Mining Method
- unknown
Location
- CRS
- UTM NAD83 Zone 21
QA/QC
- Laboratory
- SGS Canada
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.