Central Iron Ore Limited - Drilling Results Finalised
Original announcement by tmx on
- Company
- Central Iron Ore Limited
- Ticker
- CIO
- Exchange
- TSX
- Region
- Western Australia
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-19 15:34:52 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Central Iron Ore Limited announced finalized results from its 2025 Phase 1 RC drilling campaign at the British King Project in Western Australia. The program of 78 holes for 10,264 meters yielded multiple high-grade gold intercepts, including 1m at 22.2 g/t Au and 1m at 34 g/t Au. The drilling confirmed down-dip extension of mineralization and identified new high-grade chutes, with a resource update currently underway to incorporate these results.
Reasoning: The document reports significant high-grade gold drill intercepts that confirm and extend mineralization at the British King Project. The comprehensive QA/QC disclosure adds credibility to the results. While true widths are not yet known, the grades are compelling. The ongoing resource update, incorporating these results, suggests potential for an improved resource statement.
Positive factors
- Multiple high-grade gold intercepts, including 1m @ 22.2 g/t Au and 1m @ 34 g/t Au, indicate strong mineralization.
- Drilling confirmed down-dip extension of gold mineralization and identified three distinct high-grade chutes, expanding geological understanding.
- Comprehensive QA/QC procedures were disclosed, including certified lab, CRM insertion, and duplicate checks, enhancing data reliability.
- The resource update is underway, incorporating these new results, which could lead to an upgraded estimate.
Negative factors
- True widths are not yet known for any of the reported intercepts, which may overstate actual thickness.
- Many holes returned 'No Significant Intercept' (NSI), indicating variability or targeting challenges.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 58
Extracted facts
Stored fact records: 58. Some facts used in scoring do not have a stored record.
Drill Results (54)
25BKERC_001SDJV - M37/631 · goldGrade: 1.66Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_001
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.66
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 62 m
- To
- 63 m
- Hole Depth
- 78 m
- Intercept Depth
- 62 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_001:62-63
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326699
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization, though at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.66”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_002SDJV - M37/631 · goldGrade: 2.72Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_002
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.72
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 38 m
- To
- 39 m
- Hole Depth
- 54 m
- Intercept Depth
- 38 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_002:38-39
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326719
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.72”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_003SDJV - M37/631 · goldGrade: 1.09Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_003
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 56 m
- To
- 57 m
- Hole Depth
- 72 m
- Intercept Depth
- 56 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_003:56-57
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326719
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a weak grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.09”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_005SDJV - M37/631 · goldGrade: 1.55Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_005
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 101 m
- To
- 102 m
- Hole Depth
- 108 m
- Intercept Depth
- 101 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_005:101-102
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326739
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.55”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_007SDJV - M37/631 · goldGrade: 1.45Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_007
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.45
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 118 m
- To
- 119 m
- Hole Depth
- 132 m
- Intercept Depth
- 118 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_007:118-119
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326759
- Northing
- 6908137
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.45”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_008SDJV - M37/631 · goldGrade: 3.16Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_008
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 3.16
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 115 m
- To
- 116 m
- Hole Depth
- 132 m
- Intercept Depth
- 115 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_008:115-116
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326779
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“3.16”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_009SDJV - M37/631 · goldGrade: 8.59Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_009
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 8.59
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 131 m
- To
- 133 m
- Hole Depth
- 150 m
- Intercept Depth
- 131 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_009:131-133
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326819
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept represents a high-grade gold result over a narrow width, contributing positively to the project's prospectivity. The QA/QC disclosure adds confidence.
Positive factors
- High-grade gold intercept (8.59 g/t Au) indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“8.59”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 8.59 g/t Au over 1m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“8.59”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_010SDJV - M37/631 · goldGrade: 22.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_010
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 22.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 144 m
- To
- 145 m
- Hole Depth
- 156 m
- Intercept Depth
- 144 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_010:144-145
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326855
- Northing
- 6908158
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a narrow width, significantly contributing to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (22.2 g/t Au) indicates strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“22.2”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 22.2 g/t Au over 1m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“22.2”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_011SDJV - M37/631 · goldGrade: 0.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_011
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 130 m
- To
- 131 m
- Hole Depth
- 156 m
- Intercept Depth
- 130 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_011:130-131
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326899
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at the cut-off grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“0.8”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_011SDJV - M37/631 · goldGrade: 2.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_011
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 146 m
- To
- 147 m
- Hole Depth
- 156 m
- Intercept Depth
- 146 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_011:146-147
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 326899
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.03”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_012SDJV - M37/631 · goldGrade: 4.39Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_012
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 4.39
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 94 m
- To
- 95 m
- Hole Depth
- 108 m
- Intercept Depth
- 94 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_012:94-95
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327259
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“4.39”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_013SDJV - M37/631 · goldGrade: 10.59Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_013
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 10.59
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 126 m
- To
- 128 m
- Hole Depth
- 144 m
- Intercept Depth
- 126 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_013:126-128
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327259
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a strong high-grade gold intercept, contributing significantly to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- High-grade gold intercept (10.59 g/t Au) over a moderate width indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“10.59”
Context: 2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 10.59 g/t Au over 2m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“10.59”
Context: 2
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_013SDJV - M37/631 · goldGrade: 19.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_013
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 19.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 127 m
- To
- 128 m
- Hole Depth
- 144 m
- Intercept Depth
- 127 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_013:127-128
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327259
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a narrow width, significantly contributing to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (19.5 g/t Au) indicates strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“19.5”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 19.5 g/t Au over 1m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“19.5”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_015SDJV - M37/631 · goldGrade: 12.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_015
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 12.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 110 m
- To
- 111 m
- Hole Depth
- 126 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_015:110-111
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327279
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a strong high-grade gold intercept, contributing significantly to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- High-grade gold intercept (12.8 g/t Au) indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“12.8”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 12.8 g/t Au over 1m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“12.8”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_016SDJV - M37/631 · goldGrade: 5.13Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_016
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 5.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 139 m
- To
- 140 m
- Hole Depth
- 162 m
- Intercept Depth
- 139 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_016:139-140
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327279
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept represents a high-grade gold result over a narrow width, contributing positively to the project's prospectivity. The QA/QC disclosure adds confidence.
Positive factors
- High-grade gold intercept (5.13 g/t Au) indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“5.13”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 5.13 g/t Au over 1m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“5.13”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_018SDJV - M37/631 · goldGrade: 5.38Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_018
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 5.38
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 120 m
- To
- 122 m
- Hole Depth
- 138 m
- Intercept Depth
- 120 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_018:120-122
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327299
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept represents a high-grade gold result over a narrow width, contributing positively to the project's prospectivity. The QA/QC disclosure adds confidence.
Positive factors
- High-grade gold intercept (5.38 g/t Au) indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“5.38”
Context: 2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 5.38 g/t Au over 2m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“5.38”
Context: 2
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_019SDJV - M37/631 · goldGrade: 15.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_019
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 15.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 103 m
- To
- 106 m
- Hole Depth
- 120 m
- Intercept Depth
- 103 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_019:103-106
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327319
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a moderate width, significantly contributing to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (15.5 g/t Au) over a moderate width indicates strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“15.5”
Context: 3
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 15.5 g/t Au over 3m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“15.5”
Context: 3
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_019SDJV - M37/631 · goldGrade: 34Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_019
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 34
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 105 m
- To
- 106 m
- Hole Depth
- 120 m
- Intercept Depth
- 105 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_019:105-106
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327319
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a narrow width, representing a highly significant result for the project. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (34 g/t Au) indicates very strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“34”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 34 g/t Au over 1m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“34”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_020SDJV - M37/631 · goldGrade: 2.09Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_020
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.09
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 88 m
- To
- 93 m
- Hole Depth
- 108 m
- Intercept Depth
- 88 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_020:88-93
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327339
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows good gold mineralization over a moderate width, contributing positively to the project. The QA/QC disclosure adds confidence.
Positive factors
- Strong gold intercept (2.09 g/t Au) over a moderate width indicates good mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.09”
Context: 5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_021SDJV - M37/631 · goldGrade: 1.63Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_021
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.63
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 125 m
- To
- 126 m
- Hole Depth
- 138 m
- Intercept Depth
- 125 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_021:125-126
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327339
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.63”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_023SDJV - M37/631 · goldGrade: 1.13Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_023
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 92 m
- To
- 93 m
- Hole Depth
- 108 m
- Intercept Depth
- 92 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_023:92-93
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327379
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a weak grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.13”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_024SDJV - M37/631 · goldGrade: 1.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_024
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 123 m
- To
- 125 m
- Hole Depth
- 138 m
- Intercept Depth
- 123 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_024:123-125
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327379
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.25”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_024SDJV - M37/631 · goldGrade: 2.07Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_024
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.07
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 127 m
- To
- 128 m
- Hole Depth
- 138 m
- Intercept Depth
- 127 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_024:127-128
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327379
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.07”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_025SDJV - M37/631 · goldGrade: 3.33Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_025
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 3.33
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109 m
- To
- 110 m
- Hole Depth
- 126 m
- Intercept Depth
- 109 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_025:109-110
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327399
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“3.33”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_029SDJV - M37/631 · goldGrade: 1.45Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_029
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.45
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 97 m
- To
- 98 m
- Hole Depth
- 114 m
- Intercept Depth
- 97 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_029:97-98
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327459
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.45”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_029SDJV - M37/631 · goldGrade: 1.44Grade Unit: g/tIntercept: 1 mNeeds review: invalid_interval_geometryView all detailsHide details
Identity
- Hole ID
- 25BKERC_029
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.44
- Grade Unit
- g/t
- Intercept
- 1 m
- Hole Depth
- 114 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- invalid:25BKERC_029:110:11:1
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327459
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- invalid_interval_geometry
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.44”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_034SDJV - M37/631 · goldGrade: 13.26Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_034
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 13.26
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 112 m
- To
- 117 m
- Hole Depth
- 126 m
- Intercept Depth
- 112 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_034:112-117
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327519
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a moderate width, significantly contributing to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (13.26 g/t Au) over a moderate width indicates strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“13.26”
Context: 5
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 13.26 g/t Au over 5m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“13.26”
Context: 5
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_035SDJV - M37/631 · goldGrade: 2.08Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_035
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.08
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 99 m
- To
- 101 m
- Hole Depth
- 114 m
- Intercept Depth
- 99 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_035:99-101
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327539
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.08”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_036SDJV - M37/631 · goldGrade: 24.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_036
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 24.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 131 m
- To
- 132 m
- Hole Depth
- 144 m
- Intercept Depth
- 131 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_036:131-132
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327539
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a narrow width, representing a highly significant result for the project. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (24.8 g/t Au) indicates very strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“24.8”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 24.8 g/t Au over 1m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“24.8”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_037SDJV - M37/631 · goldGrade: 25.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_037
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 25.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 114 m
- To
- 115 m
- Hole Depth
- 126 m
- Intercept Depth
- 114 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_037:114-115
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327559
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a narrow width, representing a highly significant result for the project. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (25.3 g/t Au) indicates very strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“25.3”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 25.3 g/t Au over 1m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“25.3”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_038SDJV - M37/631 · goldGrade: 1.79Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_038
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 92 m
- To
- 93 m
- Hole Depth
- 114 m
- Intercept Depth
- 92 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_038:92-93
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327579
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.79”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_038SDJV - M37/631 · goldGrade: 3.96Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_038
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 3.96
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 96 m
- To
- 98 m
- Hole Depth
- 114 m
- Intercept Depth
- 96 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_038:96-98
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327579
- Northing
- 6908237
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“3.96”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_039SDJV - M37/631 · goldGrade: 7.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_039
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 7.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 122 m
- To
- 123 m
- Hole Depth
- 144 m
- Intercept Depth
- 122 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_039:122-123
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327579
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept represents a high-grade gold result over a narrow width, contributing positively to the project's prospectivity. The QA/QC disclosure adds confidence.
Positive factors
- High-grade gold intercept (7.03 g/t Au) indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“7.03”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 7.03 g/t Au over 1m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“7.03”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKERC_045SDJV - M37/631 · goldGrade: 2.12Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKERC_045
- Project
- SDJV - M37/631
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.12
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 72 m
- Intercept Depth
- 44 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKERC_045:44-45
- Mining Method
- open_pit
Location
- Location
- SDJV - M37/631
- Easting
- 327639
- Northing
- 6908297
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.12”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_002CIO - M37/30 · goldGrade: 1.18Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_002
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 132 m
- To
- 133 m
- Hole Depth
- 144 m
- Intercept Depth
- 132 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_002:132-133
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326879
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a weak grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.18”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_003CIO - M37/30 · goldGrade: 2.63Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_003
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.63
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 119 m
- To
- 120 m
- Hole Depth
- 138 m
- Intercept Depth
- 119 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_003:119-120
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326919
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.63”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_003CIO - M37/30 · goldGrade: 1.53Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_003
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.53
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 126 m
- To
- 128 m
- Hole Depth
- 138 m
- Intercept Depth
- 126 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_003:126-128
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326919
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.53”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_004CIO - M37/30 · goldGrade: 2.84Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_004
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.84
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 145 m
- To
- 149 m
- Hole Depth
- 168 m
- Intercept Depth
- 145 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_004:145-149
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326939
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows good gold mineralization over a moderate width, contributing positively to the project. The QA/QC disclosure adds confidence.
Positive factors
- Strong gold intercept (2.84 g/t Au) over a moderate width indicates good mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.84”
Context: 4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_005CIO - M37/30 · goldGrade: 1.83Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_005
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.83
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 135 m
- To
- 138 m
- Hole Depth
- 162 m
- Intercept Depth
- 135 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_005:135-138
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326959
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.83”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_006CIO - M37/30 · goldGrade: 2.24Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_006
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.24
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 113 m
- To
- 114 m
- Hole Depth
- 144 m
- Intercept Depth
- 113 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_006:113-114
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326979
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.24”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_006CIO - M37/30 · goldGrade: 1.06Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_006
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 120 m
- To
- 122 m
- Hole Depth
- 144 m
- Intercept Depth
- 120 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_006:120-122
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326979
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a weak grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.06”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_007CIO - M37/30 · goldGrade: 1.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_007
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 159 m
- To
- 160 m
- Hole Depth
- 174 m
- Intercept Depth
- 159 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_007:159-160
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326979
- Northing
- 6908157
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.25”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_008CIO - M37/30 · goldGrade: 1.36Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_008
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.36
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 100 m
- To
- 102 m
- Hole Depth
- 126 m
- Intercept Depth
- 100 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_008:100-102
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326999
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.36”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_009CIO - M37/30 · goldGrade: 4.69Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_009
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 4.69
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 138 m
- To
- 140 m
- Hole Depth
- 162 m
- Intercept Depth
- 138 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_009:138-140
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326999
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows strong gold mineralization over a moderate width, contributing positively to the project. The QA/QC disclosure adds confidence.
Positive factors
- Strong gold intercept (4.69 g/t Au) over a moderate width indicates good mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“4.69”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_009CIO - M37/30 · goldGrade: 1.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_009
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 145 m
- To
- 147 m
- Hole Depth
- 162 m
- Intercept Depth
- 145 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_009:145-147
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 326999
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.25”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_010CIO - M37/30 · goldGrade: 2.06Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_010
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 122 m
- To
- 125 m
- Hole Depth
- 144 m
- Intercept Depth
- 122 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_010:122-125
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327019
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.06”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_012CIO - M37/30 · goldGrade: 2.32Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_012
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 107 m
- To
- 112 m
- Hole Depth
- 126 m
- Intercept Depth
- 107 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_012:107-112
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327039
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows good gold mineralization over a moderate width, contributing positively to the project. The QA/QC disclosure adds confidence.
Positive factors
- Strong gold intercept (2.32 g/t Au) over a moderate width indicates good mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.32”
Context: 5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_013CIO - M37/30 · goldGrade: 0.83Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_013
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 141 m
- To
- 142 m
- Hole Depth
- 162 m
- Intercept Depth
- 141 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_013:141-142
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327039
- Northing
- 6908177
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at the cut-off grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“0.83”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_014CIO - M37/30 · goldGrade: 1.16Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_014
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 130 m
- To
- 131 m
- Hole Depth
- 150 m
- Intercept Depth
- 130 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_014:130-131
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327059
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a weak grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.16”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_018CIO - M37/30 · goldGrade: 2.77Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_018
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 2.77
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 128 m
- To
- 129 m
- Hole Depth
- 144 m
- Intercept Depth
- 128 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_018:128-129
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327099
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a strong grade over a narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“2.77”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_021CIO - M37/30 · goldGrade: 1.08Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_021
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 134 m
- To
- 135 m
- Hole Depth
- 162 m
- Intercept Depth
- 134 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_021:134-135
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327139
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a weak grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.08”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_025CIO - M37/30 · goldGrade: 1.31Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_025
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 1.31
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 147 m
- To
- 148 m
- Hole Depth
- 156 m
- Intercept Depth
- 147 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_025:147-148
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327179
- Northing
- 6908197
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This intercept shows gold mineralization at a moderate grade and narrow width. The comprehensive QA/QC disclosure supports the reliability of the assay.
Positive factors
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“1.31”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_031CIO - M37/30 · goldGrade: 12.62Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_031
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 12.62
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 112 m
- To
- 114 m
- Hole Depth
- 126 m
- Intercept Depth
- 112 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_031:112-114
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327239
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a strong high-grade gold intercept, contributing significantly to the project's prospectivity. The QA/QC disclosure adds confidence to the result.
Positive factors
- High-grade gold intercept (12.62 g/t Au) over a moderate width indicates significant mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“12.62”
Context: 2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 12.62 g/t Au over 2m is above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“12.62”
Context: 2
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
25BKRC_031CIO - M37/30 · goldGrade: 24.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 25BKRC_031
- Project
- CIO - M37/30
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- CIO
Geometry
- Grade
- 24.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 112 m
- To
- 113 m
- Hole Depth
- 126 m
- Intercept Depth
- 112 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25BKRC_031:112-113
- Mining Method
- open_pit
Location
- Location
- CIO - M37/30
- Easting
- 327239
- Northing
- 6908217
- CRS
- GDA94 UTMZ 51
- Azimuth
- 358 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas Laboratory Kalgoorlie
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.8
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept over a narrow width, representing a highly significant result for the project. The QA/QC disclosure adds confidence to the result.
Positive factors
- Exceptional high-grade gold intercept (24.3 g/t Au) indicates very strong mineralization.
- QA/QC procedures were disclosed, including certified lab and CRM insertion, enhancing data reliability.
Negative factors
- True width is not known, which may overstate the actual thickness of the intercept.
Evidence · table
“24.3”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 24.3 g/t Au over 1m is well above the exceptional threshold for open-pit gold (5 g/t).
Evidence · table
“24.3”
Context: 1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All reported intervals are down-hole lengths; true widths are not yet known.'
Evidence · text
“All reported intervals are down-hole lengths; true widths are not yet known.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, CRM insertion, and duplicate checks.
Evidence · text
“Quality Control/Quality Assurance (“QA/QC”) Statement Reverse Circulation (RC) drilling samples were collected for every metric meter (m) downhole of the 2025 RC drill program.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Resource Estimates (4)
indicatedBritish King Mine Area · goldTonnes: 120000Grade: 5.1Grade Unit: g/tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- British King Mine Area
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- Western Australia
- Ticker
- CIO
Resource scope
- Estimate type
- resource
- Effective date
- 2025-03-20T00:00:00.000Z
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Andrew Bewsher
- Resource group id
- resource:5988e60abb75279daac7
Resource Data
- Category
- indicated
- Tonnes
- 120000
- Grade
- 5.1
- Grade Unit
- g/t
Prior Estimate
- Resource Date
- 2025-03-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-03-19T00:00:00.000Z
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a previously reported, high-grade indicated resource for the British King Mine Area, compliant with NI 43-101 and signed by a QP. While positive, it is not new information.
Positive factors
- Resource is in the Indicated category, indicating reasonable geological confidence.
- High-grade gold (5.1 g/t Au) for an indicated resource.
- NI 43-101 compliant and QP signed, ensuring high reporting standards.
Negative factors
- This is a historical estimate, reducing its novelty for current assessment.
Evidence · text
“The Company’s 100% owned British King Mine Area has an NI 43-101 Mineral Resource of 120,000 indicated tonnes at 5.1 g/t Au”
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: The resource is reported as '120,000 indicated tonnes'.
Evidence · text
“120,000 indicated tonnes”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource is explicitly stated as an 'NI 43-101 Mineral Resource'.
Evidence · text
“NI 43-101 Mineral Resource”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. Andrew Bewsher, an independent consulting Qualified Person, has reviewed and approved the technical information.
Evidence · text
“Mr. Andrew Bewsher, a Member of the Australian Institute of Geoscientists, has reviewed and approved the technical information in this news release relating to the RC drilling program. Mr. Bewsher has sufficient experience relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken, to qualify as an independent consulting Qualified Person as defined in NI 43-101.”
Historical Estimate Onlynegative
Estimate pre-dates or does not comply with current JORC/NI 43-101 standards — requires verification drilling.
Why it applies: The resource was 'previously disclosed in the Company’s news release dated March 19, 2025'.
Evidence · text
“These Mineral Resources were previously disclosed in the Company’s news release dated March 19, 2025”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
inferredBritish King Mine Area · goldTonnes: 50000Grade: 2.9Grade Unit: g/tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- British King Mine Area
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- Western Australia
- Ticker
- CIO
Resource scope
- Estimate type
- resource
- Effective date
- 2025-03-20T00:00:00.000Z
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Andrew Bewsher
- Resource group id
- resource:a09b73509959c7dbd6ff
Resource Data
- Category
- inferred
- Tonnes
- 50000
- Grade
- 2.9
- Grade Unit
- g/t
Prior Estimate
- Resource Date
- 2025-03-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-03-19T00:00:00.000Z
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a previously reported inferred resource for the British King Mine Area. While compliant with NI 43-101, the inferred category implies lower confidence and it is not new information.
Positive factors
- NI 43-101 compliant and QP signed, ensuring high reporting standards.
Negative factors
- Resource is in the Inferred category, indicating lower geological confidence.
- This is a historical estimate, reducing its novelty for current assessment.
Evidence · text
“and 50,000 inferred tonnes at 2.9 g/t Au.”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The resource is reported as '50,000 inferred tonnes'.
Evidence · text
“50,000 inferred tonnes”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource is explicitly stated as an 'NI 43-101 Mineral Resource'.
Evidence · text
“NI 43-101 Mineral Resource”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. Andrew Bewsher, an independent consulting Qualified Person, has reviewed and approved the technical information.
Evidence · text
“Mr. Andrew Bewsher, a Member of the Australian Institute of Geoscientists, has reviewed and approved the technical information in this news release relating to the RC drilling program. Mr. Bewsher has sufficient experience relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken, to qualify as an independent consulting Qualified Person as defined in NI 43-101.”
Historical Estimate Onlynegative
Estimate pre-dates or does not comply with current JORC/NI 43-101 standards — requires verification drilling.
Why it applies: The resource was 'previously disclosed in the Company’s news release dated March 19, 2025'.
Evidence · text
“These Mineral Resources were previously disclosed in the Company’s news release dated March 19, 2025”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
indicatedBritish King Extensions · goldTonnes: 70000Grade: 3.4Grade Unit: g/tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- British King Extensions
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- Western Australia
- Ticker
- CIO
Resource scope
- Estimate type
- resource
- Effective date
- 2025-03-20T00:00:00.000Z
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Andrew Bewsher
- Resource group id
- resource:c2e616e95c4abb2d851f
- Ownership percent
- 70 %
Resource Data
- Category
- indicated
- Tonnes
- 70000
- Grade
- 3.4
- Grade Unit
- g/t
Prior Estimate
- Resource Date
- 2025-03-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-03-19T00:00:00.000Z
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a previously reported indicated resource for the British King Extensions, compliant with NI 43-101 and signed by a QP. While positive, it is not new information.
Positive factors
- Resource is in the Indicated category, indicating reasonable geological confidence.
- NI 43-101 compliant and QP signed, ensuring high reporting standards.
Negative factors
- This is a historical estimate, reducing its novelty for current assessment.
Evidence · text
“The British King Extensions, 100% owned by the South Darlot Joint Venture in which the Company holds a 70% interest, contain an NI 43-101 Mineral Resource of 70,000 indicated tonnes at 3.4 g/t Au”
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: The resource is reported as '70,000 indicated tonnes'.
Evidence · text
“70,000 indicated tonnes”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource is explicitly stated as an 'NI 43-101 Mineral Resource'.
Evidence · text
“NI 43-101 Mineral Resource”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. Andrew Bewsher, an independent consulting Qualified Person, has reviewed and approved the technical information.
Evidence · text
“Mr. Andrew Bewsher, a Member of the Australian Institute of Geoscientists, has reviewed and approved the technical information in this news release relating to the RC drilling program. Mr. Bewsher has sufficient experience relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken, to qualify as an independent consulting Qualified Person as defined in NI 43-101.”
Historical Estimate Onlynegative
Estimate pre-dates or does not comply with current JORC/NI 43-101 standards — requires verification drilling.
Why it applies: The resource was 'previously disclosed in the Company’s news release dated March 19, 2025'.
Evidence · text
“These Mineral Resources were previously disclosed in the Company’s news release dated March 19, 2025”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
inferredBritish King Extensions · goldTonnes: 20000Grade: 4.3Grade Unit: g/tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- British King Extensions
- Commodity
- gold
- Region
- australia_wa
- Reported Region
- Western Australia
- Ticker
- CIO
Resource scope
- Estimate type
- resource
- Effective date
- 2025-03-20T00:00:00.000Z
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Andrew Bewsher
- Resource group id
- resource:331ec157e2a2236853ba
- Ownership percent
- 70 %
Resource Data
- Category
- inferred
- Tonnes
- 20000
- Grade
- 4.3
- Grade Unit
- g/t
Prior Estimate
- Resource Date
- 2025-03-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-03-19T00:00:00.000Z
Dates
- Event date
- 2025-09-17T00:00:00.000Z
Reasoning: This is a previously reported inferred resource for the British King Extensions. While compliant with NI 43-101, the inferred category implies lower confidence and it is not new information.
Positive factors
- NI 43-101 compliant and QP signed, ensuring high reporting standards.
Negative factors
- Resource is in the Inferred category, indicating lower geological confidence.
- This is a historical estimate, reducing its novelty for current assessment.
Evidence · text
“and 20,000 inferred tonnes at 4.3 g/t Au”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The resource is reported as '20,000 inferred tonnes'.
Evidence · text
“20,000 inferred tonnes”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource is explicitly stated as an 'NI 43-101 Mineral Resource'.
Evidence · text
“NI 43-101 Mineral Resource”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. Andrew Bewsher, an independent consulting Qualified Person, has reviewed and approved the technical information.
Evidence · text
“Mr. Andrew Bewsher, a Member of the Australian Institute of Geoscientists, has reviewed and approved the technical information in this news release relating to the RC drilling program. Mr. Bewsher has sufficient experience relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken, to qualify as an independent consulting Qualified Person as defined in NI 43-101.”
Historical Estimate Onlynegative
Estimate pre-dates or does not comply with current JORC/NI 43-101 standards — requires verification drilling.
Why it applies: The resource was 'previously disclosed in the Company’s news release dated March 19, 2025'.
Evidence · text
“These Mineral Resources were previously disclosed in the Company’s news release dated March 19, 2025”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.