Correction: Melkior Yields up to 12.6% Copper, 43.9 g/t Gold and 13.1% Zinc in Phase 1 Prospecting at Genex
Original announcement by tmx on
- Company
- Melkior Resources Inc.
- Ticker
- MKR
- Exchange
- TSX
- Region
- Timmins, Ontario
- Primary commodity
- Gold
- Secondary commodities
- Copper, Zinc, Silver, Cobalt
- Document categories
- Drill results, Other
- Extracted
- 2026-09-16 11:17:40 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Melkior Resources reported high-grade prospecting results from its Phase 1 program at the Genex project, including copper up to 12.6% and gold up to 43.9 g/t. The sampling, consisting of rock chips and grabs, successfully validated gold potential in the northern extension of the historical deposit.
Reasoning: Strong high-grade surface intercepts (12.6% Cu, 43.9 g/t Au) validate the extension potential of the Genex deposit, though the surface nature of the sampling limits geological confidence.
Positive factors
- High-grade copper and gold intercepts from surface sampling
- Validation of gold potential in northern extension
- QA/QC protocols disclosed
Negative factors
- Sampling is surface-based (chip/grab) and not comparable to drill intercepts
- Results are from float and outcrops, which can overstate continuity
Facts used in scoring: 25
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 43.9 g/t gold is an exceptionally high-grade zone for surface prospecting.
Evidence · text
“highest result of 43.9 g/t gold”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes details on laboratory (AGAT), assay methods (AA, 4-Acid Digest), and use of standards and blanks.
Evidence · text
“Standards, and blanks were inserted into the sample stream.”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: Results validate the gold potential of the Claim Post trend located near the historical Genex Mine.
Evidence · text
“located between 100 and 250 metres north of the historical Genex Mine”
Extracted facts
Stored fact records: 25. Some facts used in scoring do not have a stored record.
Drill Results (25)
F213816Genex · copperGrade: 3.1Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213816
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 3.1
- Grade Unit
- %
Classification
- Sample Type
- channel
- Group ID
- F213816:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 3.1% Cu is a strong intercept for surface chip sampling.
Positive factors
- Strong copper grade from chip sample
Negative factors
- Surface sampling only
Evidence · text
“Sample F213816 assayed 3.1% copper”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213816Genex · goldGrade: 1.44Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213816
- Project
- Genex
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 1.44
- Grade Unit
- g/t
Classification
- Sample Type
- channel
- Group ID
- F213816:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 1.44 g/t Au is a modest grade for a prospecting program.
Positive factors
- Gold presence confirmed
Evidence · text
“Sample F213816 assayed 3.1% copper, 1.44 g/ gold”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213816Genex · silverGrade: 50.1Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213816
- Project
- Genex
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 50.1
- Grade Unit
- g/t
Classification
- Sample Type
- channel
- Group ID
- F213816:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 50.1 g/t Ag is a standard byproduct grade.
Positive factors
- Silver credits present
Evidence · text
“Sample F213816 assayed 3.1% copper, 1.44 g/ gold, 50.1 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213572Genex · copperGrade: 12.6Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213572
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 12.6
- Grade Unit
- %
Classification
- Sample Type
- channel
- Group ID
- F213572:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 12.6% Cu is an exceptional grade for surface chip sampling.
Positive factors
- Exceptional copper grade
Negative factors
- Surface sampling
Evidence · text
“Sample F213572 assayed 12.6% copper”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213572Genex · goldGrade: 4.48Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213572
- Project
- Genex
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 4.48
- Grade Unit
- g/t
Classification
- Sample Type
- channel
- Group ID
- F213572:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 4.48 g/t Au is a strong grade for surface prospecting.
Positive factors
- Strong gold grade
Evidence · text
“Sample F213572 assayed 12.6% copper, 4.48 g/t gold”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213572Genex · silverGrade: 24.4Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213572
- Project
- Genex
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 24.4
- Grade Unit
- g/t
Classification
- Sample Type
- channel
- Group ID
- F213572:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 24.4 g/t Ag is a standard byproduct grade.
Positive factors
- Silver credits present
Evidence · text
“Sample F213572 assayed 12.6% copper, 4.48 g/t gold, 24.4 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213572Genex · cobaltGrade: 0.047Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213572
- Project
- Genex
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.047
- Grade Unit
- %
Classification
- Sample Type
- channel
- Group ID
- F213572:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: Trace cobalt detected.
Evidence · text
“Sample F213572 assayed 12.6% copper, 4.48 g/t gold, 24.4 g/t silver, 0.047% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213533Genex · copperGrade: 1Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213533
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 1
- Grade Unit
- %
Classification
- Sample Type
- channel
- Group ID
- F213533:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 1.0% Cu is a baseline intercept.
Evidence · text
“Sample F213533 assayed 1.0% copper, 2.7% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213533Genex · zincGrade: 2.7Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213533
- Project
- Genex
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 2.7
- Grade Unit
- %
Classification
- Sample Type
- channel
- Group ID
- F213533:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 2.7% Zn is a moderate intercept.
Evidence · text
“Sample F213533 assayed 1.0% copper, 2.7% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213671Genex · copperGrade: 7.5Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213671
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 7.5
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213671:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 7.5% Cu is a very strong grade for a surface grab sample.
Positive factors
- Strong copper grade from grab
Negative factors
- Surface grab sampling
Evidence · text
“Sample F213671 assayed 7.5% copper, 2.3 g/t gold, 0.036% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213671Genex · goldGrade: 2.3Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213671
- Project
- Genex
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 2.3
- Grade Unit
- g/t
Classification
- Sample Type
- surface
- Group ID
- F213671:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 2.3 g/t Au is a solid grade for surface prospecting.
Evidence · text
“Sample F213671 assayed 7.5% copper, 2.3 g/t gold, 0.036% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213671Genex · cobaltGrade: 0.036Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213671
- Project
- Genex
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.036
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213671:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: Trace cobalt detected.
Evidence · text
“Sample F213671 assayed 7.5% copper, 2.3 g/t gold, 0.036% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213569Genex · copperGrade: 5.3Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213569
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 5.3
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213569:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 5.3% Cu is a strong grade for a surface grab sample.
Positive factors
- Strong copper grade
Negative factors
- Surface grab sampling
Evidence · text
“Sample F213569 assayed 5.3% copper, 2.1 g/t gold, 0.046% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213569Genex · goldGrade: 2.1Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213569
- Project
- Genex
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
Classification
- Sample Type
- surface
- Group ID
- F213569:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 2.1 g/t Au is a solid grade for surface prospecting.
Evidence · text
“Sample F213569 assayed 5.3% copper, 2.1 g/t gold, 0.046% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213569Genex · cobaltGrade: 0.046Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213569
- Project
- Genex
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.046
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213569:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: Trace cobalt detected.
Evidence · text
“Sample F213569 assayed 5.3% copper, 2.1 g/t gold, 0.046% cobalt”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213508Genex · copperGrade: 0.2Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213508
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.2
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213508:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 0.2% Cu is a low grade.
Evidence · text
“Sample F213508 assayed 0.2% copper, 10.7% zinc, 5.46 g/t gold, 22.5 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213508Genex · zincGrade: 10.7Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213508
- Project
- Genex
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 10.7
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213508:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 10.7% Zn is a strong grade for a surface grab sample.
Positive factors
- Strong zinc grade
Negative factors
- Surface grab sampling
Evidence · text
“Sample F213508 assayed 0.2% copper, 10.7% zinc, 5.46 g/t gold, 22.5 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213508Genex · goldGrade: 5.46Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213508
- Project
- Genex
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 5.46
- Grade Unit
- g/t
Classification
- Sample Type
- surface
- Group ID
- F213508:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 5.46 g/t Au is a strong grade for surface prospecting.
Positive factors
- Strong gold grade
Evidence · text
“Sample F213508 assayed 0.2% copper, 10.7% zinc, 5.46 g/t gold, 22.5 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213508Genex · silverGrade: 22.5Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213508
- Project
- Genex
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 22.5
- Grade Unit
- g/t
Classification
- Sample Type
- surface
- Group ID
- F213508:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 22.5 g/t Ag is a standard byproduct grade.
Evidence · text
“Sample F213508 assayed 0.2% copper, 10.7% zinc, 5.46 g/t gold, 22.5 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213512Genex · copperGrade: 0.6Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213512
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.6
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213512:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 0.6% Cu is a low grade.
Evidence · text
“Sample F213512 assayed 0.6% copper, 13.1% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213512Genex · zincGrade: 13.1Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213512
- Project
- Genex
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 13.1
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213512:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 13.1% Zn is a strong grade for a surface grab sample.
Positive factors
- Strong zinc grade
Negative factors
- Surface grab sampling
Evidence · text
“Sample F213512 assayed 0.6% copper, 13.1% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213516Genex · goldGrade: 43.9Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213516
- Project
- Genex
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 43.9
- Grade Unit
- g/t
Classification
- Sample Type
- surface
- Group ID
- F213516:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 43.9 g/t Au is an exceptional bonanza grade for surface prospecting.
Positive factors
- Bonanza grade gold
Negative factors
- Surface grab sampling
Evidence · text
“Sample F213516 assayed 0.095 % copper, 0.7% zinc, 43.9 g/t gold, 23.8 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213516Genex · copperGrade: 0.095Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213516
- Project
- Genex
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.095
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213516:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 0.095% Cu is a low grade.
Evidence · text
“Sample F213516 assayed 0.095 % copper, 0.7% zinc, 43.9 g/t gold, 23.8 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213516Genex · zincGrade: 0.7Grade Unit: %View all detailsHide details
Identity
- Hole ID
- F213516
- Project
- Genex
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 0.7
- Grade Unit
- %
Classification
- Sample Type
- surface
- Group ID
- F213516:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 0.7% Zn is a low grade.
Evidence · text
“Sample F213516 assayed 0.095 % copper, 0.7% zinc, 43.9 g/t gold, 23.8 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
F213516Genex · silverGrade: 23.8Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- F213516
- Project
- Genex
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Timmins, Ontario
- Ticker
- MKR
Geometry
- Grade
- 23.8
- Grade Unit
- g/t
Classification
- Sample Type
- surface
- Group ID
- F213516:0-0
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-04T00:00:00.000Z
Reasoning: 23.8 g/t Ag is a standard byproduct grade.
Evidence · text
“Sample F213516 assayed 0.095 % copper, 0.7% zinc, 43.9 g/t gold, 23.8 g/t silver”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.