Cygnus Metals Limited: Drilling Results Update
Original announcement by globenewswire on
- Company
- Cygnus Metals Limited
- Ticker
- CY5
- Exchange
- Unavailable
- Region
- Quebec, Canada
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-12 02:46:19 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Cygnus Metals Limited announced positive exploration results from its Chibougamau Copper-Gold Project in Quebec, Canada. Step-out drilling at Copper Rand returned significant polymetallic intercepts, including 20.3m at 4.2g/t AuEq, extending mineralization 200m along strike. The maiden drill program at Gwillim successfully intersected gold mineralization in all nine holes, with highlights such as 13.5m at 8.0g/t Au and 3.1m at 20.8g/t Au, including 0.4m at 108.0g/t Au. The release also includes details of the project's mineral resource estimate from September 2025.
Reasoning: The document reports strong exploration drill results from two prospects, Copper Rand and Gwillim, with high-grade gold and significant polymetallic intercepts extending known mineralization and confirming new zones. The maiden drill program at Gwillim was 100% successful in intersecting gold. The resource update provides context for the broader project.
Positive factors
- High-grade gold intercepts at Gwillim, including 108.0 g/t Au over 0.4m and 20.8 g/t Au over 3.1m.
- Significant polymetallic intercepts at Copper Rand, including 14.2 g/t AuEq over 3.4m and 4.2 g/t AuEq over 20.3m.
- Step-out drilling at Copper Rand successfully extended mineralization 200m along strike from the historic mine.
- Maiden drill program at Gwillim intersected gold mineralization in all nine holes drilled.
- Potential for Copper Rand to add to existing resources in the Chibougamau North Camp.
- Qualified Person (QP) and Competent Person (CP) sign-off for both exploration results and the resource estimate.
- Detailed disclosure of metal equivalent assumptions for both exploration results and the resource estimate.
- True width estimation range (70-90% of downhole thickness) is provided for drill intercepts.
Negative factors
- True width is provided as an estimated range rather than a precise figure for drill intercepts.
- The mineral resource estimate presented is from September 2025, not a new update in this release.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 54
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drilling at Copper Rand intersected mineralisation 200m along strike from the historic mine, extending the known mineralized footprint.
Evidence · text
“Drilling intersected mineralisation 200m along strike from the historic mine”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 0.4m at 108.0g/t Au from GWL-26-01 at Gwillim is exceptionally high-grade, well above typical thresholds.
Evidence · table
“108.0”
Context: 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The scientific and technical information in this announcement has been reviewed and approved by Mr Louis Beaupre, a 'qualified person' as defined in NI 43-101 and a 'Competent Person' under JORC.
Evidence · text
“The scientific and technical information in this announcement has been reviewed and approved by Mr Louis Beaupre, the Quebec Exploration Manager of Cygnus, a “qualified person” as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width for drill intercepts is estimated to be between 70-90% of downhole thickness, meaning a precise true width is not stated.
Evidence · text
“True width estimated to be between 70-90% of downhole thickness.”
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: The Mineral Resource Estimate for the Chibougamau Project is reported in accordance with the JORC Code 2012.
Evidence · text
“The information in this release that relates to the Mineral Resource Estimate for the Chibougamau Project reported in accordance with the JORC Code 2012”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The Mineral Resource Estimate for the Chibougamau Project is reported in accordance with NI 43-101 Standards of Disclosure for Mineral Projects.
Evidence · text
“and NI 43-101 was released by Cygnus in an announcement titled ‘Major Resource Update’ released to the ASX on 17 September 2025.”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr Louis Beaupre, Quebec Exploration Manager, is named as a 'qualified person' under NI 43-101 and a 'Competent Person' under JORC for both exploration results and the resource estimate.
Evidence · text
“The scientific and technical information in this announcement has been reviewed and approved by Mr Louis Beaupre, the Quebec Exploration Manager of Cygnus, a “qualified person” as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects.”
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: The document includes an update on the Mineral Resource Estimate for the Chibougamau Project as at 17 September 2025.
Evidence · text
“APPENDIX C – Mineral Resource Estimate for the Chibougamau Project as at 17 September 2025”
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: The effective date of the Mineral Resource Estimate is 17 September 2025, which is over a year old relative to the announcement date of August 27, 2026.
Evidence · text
“APPENDIX C – Mineral Resource Estimate for the Chibougamau Project as at 17 September 2025”
Extracted facts
Stored fact records: 54. Some facts used in scoring do not have a stored record.
Drill Results (51)
CR-26-01W1Copper Rand · goldGrade: 0.1Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- CR-26-01W1
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 491.5 m
- To
- 493.8 m
- Hole Depth
- 842.4 m
- Intercept Depth
- 491.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-01W1:491.5-493.8
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 358 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2.7
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low gold grade but contributes to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.1”
Context: 2.3
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-01W1Copper Rand · copperGrade: 1.7Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- CR-26-01W1
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 491.5 m
- To
- 493.8 m
- Hole Depth
- 842.4 m
- Intercept Depth
- 491.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-01W1:491.5-493.8
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 358 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2.7
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade as part of the polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Moderate copper grade.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“1.7”
Context: 2.3
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-01W1Copper Rand · silverGrade: 19Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- CR-26-01W1
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 19
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 491.5 m
- To
- 493.8 m
- Hole Depth
- 842.4 m
- Intercept Depth
- 491.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-01W1:491.5-493.8
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 358 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2.7
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a low silver grade as part of the polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“19.0”
Context: 2.3
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-02Copper Rand · goldGrade: 0.6Grade Unit: g/tIntercept: 20.3 mView all detailsHide details
Identity
- Hole ID
- CR-26-02
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 20.3 m
- From
- 399.1 m
- To
- 419.3 m
- Hole Depth
- 702 m
- Intercept Depth
- 399.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-02:399.1-419.3
Location
- Easting
- 551946
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 337 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 4.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a good width with low gold grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Good intercept length.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.6”
Context: 20.3
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-02Copper Rand · copperGrade: 2.5Grade Unit: %Intercept: 20.3 mView all detailsHide details
Identity
- Hole ID
- CR-26-02
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 2.5
- Grade Unit
- %
- Intercept
- 20.3 m
- From
- 399.1 m
- To
- 419.3 m
- Hole Depth
- 702 m
- Intercept Depth
- 399.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-02:399.1-419.3
Location
- Easting
- 551946
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 337 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 4.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a good width, making it a significant polymetallic result in the step-out program at Copper Rand.
Positive factors
- Strong copper grade over a good intercept length.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“2.5”
Context: 20.3
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-02Copper Rand · silverGrade: 14.2Grade Unit: g/tIntercept: 20.3 mView all detailsHide details
Identity
- Hole ID
- CR-26-02
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 14.2
- Grade Unit
- g/t
- Intercept
- 20.3 m
- From
- 399.1 m
- To
- 419.3 m
- Hole Depth
- 702 m
- Intercept Depth
- 399.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-02:399.1-419.3
Location
- Easting
- 551946
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 337 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 4.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a good width with low silver grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Good intercept length.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“14.2”
Context: 20.3
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-02Copper Rand · goldGrade: 2Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- CR-26-02
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 416 m
- To
- 419.3 m
- Hole Depth
- 702 m
- Intercept Depth
- 416 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-02:416-419.3
Location
- Easting
- 551946
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 337 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 14.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This high-grade gold sub-interval significantly enhances the overall polymetallic intercept, indicating a strong mineralized zone.
Positive factors
- Strong gold grade within a significant polymetallic intercept.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“2.0”
Context: 3.4
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-02Copper Rand · copperGrade: 8.5Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- CR-26-02
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 8.5
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 416 m
- To
- 419.3 m
- Hole Depth
- 702 m
- Intercept Depth
- 416 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-02:416-419.3
Location
- Easting
- 551946
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 337 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 14.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This bonanza-grade copper sub-interval is highly material and significantly boosts the overall polymetallic intercept, indicating a very strong mineralized zone.
Positive factors
- Exceptional copper grade within a significant polymetallic intercept.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“8.5”
Context: 3.4
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-02Copper Rand · silverGrade: 47.1Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- CR-26-02
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 47.1
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 416 m
- To
- 419.3 m
- Hole Depth
- 702 m
- Intercept Depth
- 416 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-02:416-419.3
Location
- Easting
- 551946
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 337 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 14.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This strong silver grade sub-interval contributes positively to the overall polymetallic intercept, indicating a robust mineralized zone.
Positive factors
- Strong silver grade within a significant polymetallic intercept.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“47.1”
Context: 3.4
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · goldGrade: 0.4Grade Unit: g/tIntercept: 5.6 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 5.6 m
- From
- 480.4 m
- To
- 486 m
- Hole Depth
- 822 m
- Intercept Depth
- 480.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:480.4-486
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low gold grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.4”
Context: 5.6
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · copperGrade: 0.5Grade Unit: %Intercept: 5.6 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 5.6 m
- From
- 480.4 m
- To
- 486 m
- Hole Depth
- 822 m
- Intercept Depth
- 480.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:480.4-486
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low copper grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low copper grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.5”
Context: 5.6
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · silverGrade: 3Grade Unit: g/tIntercept: 5.6 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 5.6 m
- From
- 480.4 m
- To
- 486 m
- Hole Depth
- 822 m
- Intercept Depth
- 480.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:480.4-486
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low silver grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“3.0”
Context: 5.6
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · goldGrade: 0.6Grade Unit: g/tIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 2.9 m
- From
- 523.6 m
- To
- 526.5 m
- Hole Depth
- 822 m
- Intercept Depth
- 523.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:523.6-526.5
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 3.1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low gold grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.6”
Context: 2.9
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · copperGrade: 1.7Grade Unit: %Intercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 2.9 m
- From
- 523.6 m
- To
- 526.5 m
- Hole Depth
- 822 m
- Intercept Depth
- 523.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:523.6-526.5
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 3.1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade as part of the polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Moderate copper grade.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“1.7”
Context: 2.9
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · silverGrade: 12.9Grade Unit: g/tIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 12.9
- Grade Unit
- g/t
- Intercept
- 2.9 m
- From
- 523.6 m
- To
- 526.5 m
- Hole Depth
- 822 m
- Intercept Depth
- 523.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:523.6-526.5
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 3.1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low silver grade as part of the polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“12.9”
Context: 2.9
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · goldGrade: 5.1Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 5.1
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 784.3 m
- To
- 786.2 m
- Hole Depth
- 822 m
- Intercept Depth
- 784.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:784.3-786.2
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 12.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This high-grade gold intercept significantly enhances the overall polymetallic result, indicating a strong mineralized zone.
Positive factors
- Strong gold grade within a significant polymetallic intercept.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“5.1”
Context: 1.9
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · copperGrade: 5.3Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 5.3
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 784.3 m
- To
- 786.2 m
- Hole Depth
- 822 m
- Intercept Depth
- 784.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:784.3-786.2
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 12.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This bonanza-grade copper intercept is highly material and significantly boosts the overall polymetallic result, indicating a very strong mineralized zone.
Positive factors
- Exceptional copper grade within a significant polymetallic intercept.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“5.3”
Context: 1.9
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-03W2Copper Rand · silverGrade: 4.5Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- CR-26-03W2
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 4.5
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 784.3 m
- To
- 786.2 m
- Hole Depth
- 822 m
- Intercept Depth
- 784.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-03W2:784.3-786.2
Location
- Easting
- 551965
- Northing
- 5525890
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 401 m
- Azimuth
- 335 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 12.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low silver grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“4.5”
Context: 1.9
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-04Copper Rand · goldGrade: 3.6Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- CR-26-04
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 328.7 m
- To
- 333.7 m
- Hole Depth
- 402 m
- Intercept Depth
- 328.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-04:328.7-333.7
Location
- Easting
- 551947
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 8 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 5.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This strong gold grade intercept contributes positively to the overall polymetallic result, indicating a robust mineralized zone.
Positive factors
- Strong gold grade within a significant polymetallic intercept.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“3.6”
Context: 5.1
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-04Copper Rand · copperGrade: 1.2Grade Unit: %Intercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- CR-26-04
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.2
- Grade Unit
- %
- Intercept
- 5.1 m
- From
- 328.7 m
- To
- 333.7 m
- Hole Depth
- 402 m
- Intercept Depth
- 328.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-04:328.7-333.7
Location
- Easting
- 551947
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 8 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 5.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade as part of the polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Moderate copper grade.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“1.2”
Context: 5.1
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-04Copper Rand · silverGrade: 8.6Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- CR-26-04
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 8.6
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 328.7 m
- To
- 333.7 m
- Hole Depth
- 402 m
- Intercept Depth
- 328.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-04:328.7-333.7
Location
- Easting
- 551947
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 8 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 5.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows low silver grade as part of the polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“8.6”
Context: 5.1
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-04Copper Rand · goldGrade: 0.7Grade Unit: g/tIntercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- CR-26-04
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 9.7 m
- From
- 614.5 m
- To
- 624.2 m
- Hole Depth
- 402 m
- Intercept Depth
- 614.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-04:614.5-624.2
Location
- Easting
- 551947
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 8 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1.5
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a good width with low gold grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Good intercept length.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.7”
Context: 9.7
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-04Copper Rand · copperGrade: 0.6Grade Unit: %Intercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- CR-26-04
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 9.7 m
- From
- 614.5 m
- To
- 624.2 m
- Hole Depth
- 402 m
- Intercept Depth
- 614.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-04:614.5-624.2
Location
- Easting
- 551947
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 8 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1.5
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a good width with low copper grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Good intercept length.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low copper grade.
- True width is estimated, not precisely stated.
Evidence · table
“0.6”
Context: 9.7
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
CR-26-04Copper Rand · silverGrade: 6.2Grade Unit: g/tIntercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- CR-26-04
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 6.2
- Grade Unit
- g/t
- Intercept
- 9.7 m
- From
- 614.5 m
- To
- 624.2 m
- Hole Depth
- 402 m
- Intercept Depth
- 614.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-26-04:614.5-624.2
Location
- Easting
- 551947
- Northing
- 5525969
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 395 m
- Azimuth
- 8 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1.5
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a good width with low silver grade, contributing to the overall polymetallic mineralization in the step-out program at Copper Rand.
Positive factors
- Good intercept length.
- Part of a step-out drilling program extending mineralization.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- True width is estimated, not precisely stated.
Evidence · table
“6.2”
Context: 9.7
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-01Gwillim · goldGrade: 20.8Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- GWL-26-01
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 20.8
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 212.7 m
- To
- 215.8 m
- Hole Depth
- 231 m
- Intercept Depth
- 212.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-01:212.7-215.8
Location
- Easting
- 539308
- Northing
- 5534036
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 374 m
- Azimuth
- 180 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This bonanza-grade gold intercept is highly material and a strong positive result from the maiden drill program at Gwillim.
Positive factors
- Exceptional gold grade over a good width.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“20.8”
Context: 3.1
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-01Gwillim · goldGrade: 108Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- GWL-26-01
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 108
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 214.2 m
- To
- 214.6 m
- Hole Depth
- 231 m
- Intercept Depth
- 214.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-01:214.2-214.6
Location
- Easting
- 539308
- Northing
- 5534036
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 374 m
- Azimuth
- 180 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This bonanza-grade gold sub-interval is extremely material, highlighting a very high-grade zone within the Gwillim project.
Positive factors
- Bonanza gold grade, indicating a very high-grade zone.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Narrow intercept length.
- True width is estimated, not precisely stated.
Evidence · table
“108.0”
Context: 0.4
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-02Gwillim · goldGrade: 3.5Grade Unit: g/tIntercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- GWL-26-02
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 8.6 m
- From
- 301 m
- To
- 309.6 m
- Hole Depth
- 357 m
- Intercept Depth
- 301 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-02:301-309.6
Location
- Easting
- 539293
- Northing
- 5534159
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 370 m
- Azimuth
- 180 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This strong gold intercept over a good width is a positive result from the maiden drill program at Gwillim.
Positive factors
- Strong gold grade over a good width.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“3.5”
Context: 8.6
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-03Gwillim · goldGrade: 4.5Grade Unit: g/tIntercept: 9.4 mView all detailsHide details
Identity
- Hole ID
- GWL-26-03
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 4.5
- Grade Unit
- g/t
- Intercept
- 9.4 m
- From
- 164.6 m
- To
- 174 m
- Hole Depth
- 300 m
- Intercept Depth
- 164.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-03:164.6-174
Location
- Easting
- 539221
- Northing
- 5534091
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 373 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This strong gold intercept over a good width is a positive result from the maiden drill program at Gwillim.
Positive factors
- Strong gold grade over a good width.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“4.5”
Context: 9.4
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-04Gwillim · goldGrade: 1.2Grade Unit: g/tIntercept: 21.5 mView all detailsHide details
Identity
- Hole ID
- GWL-26-04
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 21.5 m
- From
- 126 m
- To
- 147.5 m
- Hole Depth
- 195 m
- Intercept Depth
- 126 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-04:126-147.5
Location
- Easting
- 539293
- Northing
- 5533993
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 373 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a good width with moderate gold grade, contributing positively to the maiden drill program at Gwillim.
Positive factors
- Good intercept length.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“1.2”
Context: 21.5
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-05Gwillim · goldGrade: 8Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- GWL-26-05
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 8
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 19.5 m
- To
- 33 m
- Hole Depth
- 63 m
- Intercept Depth
- 19.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-05:19.5-33
Location
- Easting
- 539260
- Northing
- 5533938
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 381 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This strong gold intercept over a good width at shallow depth is a highly positive result from the maiden drill program at Gwillim.
Positive factors
- Strong gold grade over a good width.
- Shallow intercept depth.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“8.0”
Context: 13.5
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-06Gwillim · goldGrade: 1.2Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- GWL-26-06
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 148.5 m
- To
- 154 m
- Hole Depth
- 321 m
- Intercept Depth
- 148.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-06:148.5-154
Location
- Easting
- 539395
- Northing
- 5534164
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 381 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the overall success of the maiden drill program at Gwillim.
Positive factors
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“1.2”
Context: 5.5
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-07Gwillim · goldGrade: 1Grade Unit: g/tIntercept: 6.2 mView all detailsHide details
Identity
- Hole ID
- GWL-26-07
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 6.2 m
- From
- 202.8 m
- To
- 209 m
- Hole Depth
- 339 m
- Intercept Depth
- 202.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-07:202.8-209
Location
- Easting
- 539449
- Northing
- 5534139
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 373 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the overall success of the maiden drill program at Gwillim.
Positive factors
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“1.0”
Context: 6.2
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-08Gwillim · goldGrade: 4.3Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- GWL-26-08
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 4.3
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 320.2 m
- To
- 326.3 m
- Hole Depth
- 414 m
- Intercept Depth
- 320.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-08:320.2-326.3
Location
- Easting
- 539371
- Northing
- 5534206
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 374 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This strong gold intercept over a good width is a positive result from the maiden drill program at Gwillim.
Positive factors
- Strong gold grade over a good width.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- True width is estimated, not precisely stated.
Evidence · table
“4.3”
Context: 6.1
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-09Gwillim · goldGrade: 1.7Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- GWL-26-09
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 427.3 m
- To
- 457.3 m
- Hole Depth
- 474 m
- Intercept Depth
- 427.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-09:427.3-457.3
Location
- Easting
- 539348
- Northing
- 5534268
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 381 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This intercept shows excellent width with moderate gold grade, contributing significantly to the maiden drill program at Gwillim.
Positive factors
- Excellent intercept length.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“1.7”
Context: 30.0
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-09Gwillim · goldGrade: 2.4Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- GWL-26-09
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 430.3 m
- To
- 438.3 m
- Hole Depth
- 474 m
- Intercept Depth
- 430.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-09:430.3-438.3
Location
- Easting
- 539348
- Northing
- 5534268
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 381 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This sub-interval shows good width with moderate gold grade, contributing to the overall intercept in the maiden drill program at Gwillim.
Positive factors
- Good intercept length.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“2.4”
Context: 8.0
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
GWL-26-09Gwillim · goldGrade: 2.3Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- GWL-26-09
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 2.3
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 445.3 m
- To
- 453.3 m
- Hole Depth
- 474 m
- Intercept Depth
- 445.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GWL-26-09:445.3-453.3
Location
- Easting
- 539348
- Northing
- 5534268
- CRS
- UTM NAD83 (Zone 18)
- Elevation
- 381 m
- Azimuth
- 179 °
- Dip
- -61 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This sub-interval shows good width with moderate gold grade, contributing to the overall intercept in the maiden drill program at Gwillim.
Positive factors
- Good intercept length.
- Part of a successful maiden drill program intersecting gold in all holes.
- True width estimation range provided.
Negative factors
- Low gold grade.
- True width is estimated, not precisely stated.
Evidence · table
“2.3”
Context: 8.0
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
36R251Copper Rand · goldGrade: 11Grade Unit: g/tIntercept: 13.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R251
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 11
- Grade Unit
- g/t
- Intercept
- 13.7 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong gold mineralization over a good width, highlighting the potential of the Copper Rand project.
Positive factors
- Strong gold grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“13.7m at 13.0g/t AuEq (11.0g/t Au, 1.4% Cu & 7.7g/t Ag) (36R251)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R251Copper Rand · copperGrade: 1.4Grade Unit: %Intercept: 13.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R251
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.4
- Grade Unit
- %
- Intercept
- 13.7 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows moderate copper mineralization over a good width, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Moderate copper grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“13.7m at 13.0g/t AuEq (11.0g/t Au, 1.4% Cu & 7.7g/t Ag) (36R251)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R251Copper Rand · silverGrade: 7.7Grade Unit: g/tIntercept: 13.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R251
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 7.7
- Grade Unit
- g/t
- Intercept
- 13.7 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows low silver mineralization, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“13.7m at 13.0g/t AuEq (11.0g/t Au, 1.4% Cu & 7.7g/t Ag) (36R251)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R284Copper Rand · goldGrade: 11.6Grade Unit: g/tIntercept: 13.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R284
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 11.6
- Grade Unit
- g/t
- Intercept
- 13.3 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 13.9
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong gold mineralization over a good width, highlighting the potential of the Copper Rand project.
Positive factors
- Strong gold grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“13.3m at 13.9g/t AuEq (11.6g/t Au, 1.6% Cu & 6.9g/t Ag) (36R284)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R284Copper Rand · copperGrade: 1.6Grade Unit: %Intercept: 13.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R284
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 1.6
- Grade Unit
- %
- Intercept
- 13.3 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 13.9
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows moderate copper mineralization over a good width, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Moderate copper grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“13.3m at 13.9g/t AuEq (11.6g/t Au, 1.6% Cu & 6.9g/t Ag) (36R284)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R284Copper Rand · silverGrade: 6.9Grade Unit: g/tIntercept: 13.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R284
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 6.9
- Grade Unit
- g/t
- Intercept
- 13.3 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 13.9
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows low silver mineralization, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“13.3m at 13.9g/t AuEq (11.6g/t Au, 1.6% Cu & 6.9g/t Ag) (36R284)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R234Copper Rand · goldGrade: 0.8Grade Unit: g/tIntercept: 15.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R234
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 7.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows a good width with low gold grade, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Good intercept length.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low gold grade.
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“15.5m at 7.3g/t AuEq (0.8g/t Au, 4.7% Cu & 10.8g/t Ag) (36R234)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R234Copper Rand · copperGrade: 4.7Grade Unit: %Intercept: 15.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R234
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 4.7
- Grade Unit
- %
- Intercept
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 7.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong copper mineralization over a good width, highlighting the polymetallic potential of Copper Rand.
Positive factors
- Strong copper grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“15.5m at 7.3g/t AuEq (0.8g/t Au, 4.7% Cu & 10.8g/t Ag) (36R234)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R234Copper Rand · silverGrade: 10.8Grade Unit: g/tIntercept: 15.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R234
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 10.8
- Grade Unit
- g/t
- Intercept
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 7.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows low silver mineralization, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“15.5m at 7.3g/t AuEq (0.8g/t Au, 4.7% Cu & 10.8g/t Ag) (36R234)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R294Copper Rand · goldGrade: 12.1Grade Unit: g/tIntercept: 8.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R294
- Project
- Copper Rand
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 12.1
- Grade Unit
- g/t
- Intercept
- 8.5 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 18
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong gold mineralization over a good width, highlighting the potential of the Copper Rand project.
Positive factors
- Strong gold grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“8.5m at 18.0g/t AuEq (12.1g/t Au, 4.3% Cu & 8.9g/t Ag) (36R294)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R294Copper Rand · copperGrade: 4.3Grade Unit: %Intercept: 8.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R294
- Project
- Copper Rand
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 4.3
- Grade Unit
- %
- Intercept
- 8.5 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 18
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong copper mineralization over a good width, highlighting the polymetallic potential of Copper Rand.
Positive factors
- Strong copper grade over a good width.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“8.5m at 18.0g/t AuEq (12.1g/t Au, 4.3% Cu & 8.9g/t Ag) (36R294)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
36R294Copper Rand · silverGrade: 8.9Grade Unit: g/tIntercept: 8.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 36R294
- Project
- Copper Rand
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 8.9
- Grade Unit
- g/t
- Intercept
- 8.5 m
Classification
- Program
- exploration
- Sample Type
- drill
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 18
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows low silver mineralization, contributing to the polymetallic potential of Copper Rand.
Positive factors
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“8.5m at 18.0g/t AuEq (12.1g/t Au, 4.3% Cu & 8.9g/t Ag) (36R294)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
87-KOD-18Gwillim · goldGrade: 38.1Grade Unit: g/tIntercept: 7.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-KOD-18
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 38.1
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 314.9 m
- To
- 322.5 m
- Intercept Depth
- 314.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 87-KOD-18:314.9-322.5
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows exceptional gold grade over a good width, highlighting the high-grade potential of the Gwillim project.
Positive factors
- Exceptional gold grade over a good width.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“7.6m at 38.1g/t Au from 314.9m (87-KOD-18)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
87-KOD-1Gwillim · goldGrade: 9.4Grade Unit: g/tIntercept: 15.2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-KOD-1
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 9.4
- Grade Unit
- g/t
- Intercept
- 15.2 m
- From
- 155.1 m
- To
- 170.3 m
- Intercept Depth
- 155.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 87-KOD-1:155.1-170.3
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong gold grade over a good width, highlighting the potential of the Gwillim project.
Positive factors
- Strong gold grade over a good width.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“15.2m at 9.4g/t Au from 155.1m (87-KOD-1)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
87-KOD-10Gwillim · goldGrade: 8.3Grade Unit: g/tIntercept: 16.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-KOD-10
- Project
- Gwillim
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- CY5
Geometry
- Grade
- 8.3
- Grade Unit
- g/t
- Intercept
- 16.4 m
- From
- 168.3 m
- To
- 184.7 m
- Intercept Depth
- 168.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 87-KOD-10:168.3-184.7
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This historical intercept shows strong gold grade over a good width, highlighting the potential of the Gwillim project.
Positive factors
- Strong gold grade over a good width.
Negative factors
- Historical data, not new results.
- True width is estimated, not precisely stated.
Evidence · text
“16.4m at 8.3g/t Au from 168.3m (87-KOD-10)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Resource Estimates (3)
inferredHub and Spoke · copperTonnes: 8500000Grade: 2.1Grade Unit: %Contained Metal: 182Contained Unit: ktView all detailsHide details
Identity
- Project
- Hub and Spoke
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- Quebec, Canada
- Ticker
- CY5
Resource scope
- Estimate type
- resource
- Effective date
- 2025-09-17T00:00:00.000Z
- Reporting standards
- jorc, ni_43_101
- QP Signed
- Yes
- Qualified person names
- Mr Louis Beaupre
- Resource group id
- resource:846c999e4c37bc921727
Resource Data
- Category
- inferred
- Tonnes
- 8500000
- Grade
- 2.1
- Grade Unit
- %
- Contained Metal
- 182
- Contained Unit
- kt
Prior Estimate
- Resource Date
- 2025-09-17
Metal Equivalent
- Metal Eq. Grade
- 3.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This Inferred resource for copper at Hub and Spoke shows a strong grade, indicating potential but with lower geological confidence.
Positive factors
- Strong copper grade in an Inferred resource category.
- Resource estimate is JORC and NI 43-101 compliant with QP/CP sign-off.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Inferred resource category implies lower confidence.
- Resource estimate is historical (September 2025), not new.
Evidence · table
“2.1”
Context: 8.5
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
inferredHub and Spoke · goldTonnes: 8500000Grade: 1.7Grade Unit: g/tContained Metal: 454Contained Unit: kozView all detailsHide details
Identity
- Project
- Hub and Spoke
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- Quebec, Canada
- Ticker
- CY5
Resource scope
- Estimate type
- resource
- Effective date
- 2025-09-17T00:00:00.000Z
- Reporting standards
- jorc, ni_43_101
- QP Signed
- Yes
- Qualified person names
- Mr Louis Beaupre
- Resource group id
- resource:846c999e4c37bc921727
Resource Data
- Category
- inferred
- Tonnes
- 8500000
- Grade
- 1.7
- Grade Unit
- g/t
- Contained Metal
- 454
- Contained Unit
- koz
Prior Estimate
- Resource Date
- 2025-09-17
Metal Equivalent
- Metal Eq. Grade
- 4.8
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This Inferred resource for gold at Hub and Spoke shows a moderate grade, indicating potential but with lower geological confidence.
Positive factors
- Moderate gold grade in an Inferred resource category.
- Resource estimate is JORC and NI 43-101 compliant with QP/CP sign-off.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Inferred resource category implies lower confidence.
- Resource estimate is historical (September 2025), not new.
Evidence · table
“1.7”
Context: 8.5
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
inferredHub and Spoke · silverTonnes: 8500000Grade: 7.9Grade Unit: g/tContained Metal: 2168Contained Unit: kozView all detailsHide details
Identity
- Project
- Hub and Spoke
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- Quebec, Canada
- Ticker
- CY5
Resource scope
- Estimate type
- resource
- Effective date
- 2025-09-17T00:00:00.000Z
- Reporting standards
- jorc, ni_43_101
- QP Signed
- Yes
- Qualified person names
- Mr Louis Beaupre
- Resource group id
- resource:846c999e4c37bc921727
Resource Data
- Category
- inferred
- Tonnes
- 8500000
- Grade
- 7.9
- Grade Unit
- g/t
- Contained Metal
- 2168
- Contained Unit
- koz
Prior Estimate
- Resource Date
- 2025-09-17
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-08-27T00:00:00.000Z
Reasoning: This Inferred resource for silver at Hub and Spoke shows a low grade, contributing to the polymetallic nature of the resource with lower confidence.
Positive factors
- Resource estimate is JORC and NI 43-101 compliant with QP/CP sign-off.
- Metal equivalent assumptions are fully disclosed.
Negative factors
- Low silver grade.
- Inferred resource category implies lower confidence.
- Resource estimate is historical (September 2025), not new.
Evidence · table
“7.9”
Context: 8.5
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.