District Confirms MobileMT Geophysical Anomalies by Intersecting Graphitic Black Shale in Every Drill Hole at the Alum Shale Properties in Sweden
Original announcement by tmx on
- Company
- District Metals Corp.
- Ticker
- DMX
- Exchange
- TSX
- Region
- Sweden
- Primary commodity
- Uranium
- Secondary commodities
- Vanadium, Potash, Molybdenum, Nickel, Copper, Zinc
- Document categories
- Drill results, Economic study
- Extracted
- 2026-09-17 18:22:56 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
District Metals Corp. announced the successful completion of its inaugural diamond drilling program at the Österkälen and Malgomaj mineral licenses in Sweden. All 15 drill holes intersected graphitic black shale, validating the MobileMT geophysical survey in previously undrilled areas. While the intersections confirm the presence of the target lithology, geochemical assay results are pending to determine the metal content and economic potential of the Alum Shale Formation.
Reasoning: The inaugural drill program successfully intersected the target lithology in all holes, validating the geophysical targeting method in previously undrilled areas. However, the economic significance of these intersections remains unknown pending geochemical assay results. The abandonment of three holes due to ground conditions is a minor negative.
Positive factors
- All drill holes successfully intersected the target graphitic black shale, validating the MobileMT geophysical survey.
- The drilling was first-pass in previously undrilled areas, indicating high exploration novelty.
- The Alum Shale Formation is known to host polymetallic mineralization, including uranium.
Negative factors
- No assay results for metal content are available yet, limiting the immediate economic interpretation.
- Three drill holes were abandoned due to ground conditions and core loss.
- Only apparent downhole widths are reported, with no true width estimates.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 45
Classification and evidence
exploration_4positive · Story-specific tag
No canonical definition is currently available.
Why it applies: The document states that the drilled areas 'have never been drilled for mineral exploration', indicating first-pass drilling in a new target area.
Evidence · text
“These areas have never been drilled for mineral exploration.”
exploration_3positive · Story-specific tag
No canonical definition is currently available.
Why it applies: The drill program specifically targeted 'prominent conductive anomalies identified by the Company's 2025 helicopter-borne Mobile MagnetoTellurics ("MobileMT") survey'.
Evidence · text
“The drill program targeted prominent conductive anomalies identified by the Company's 2025 helicopter-borne Mobile MagnetoTellurics ("MobileMT") survey”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The news release states that 'All scientific and technical information... has been prepared by, or approved by Garrett Ainsworth, P.Geo, President and CEO of the Company. Mr. Ainsworth is a Qualified Person for the purposes of National Instrument 43-101'.
Evidence · text
“All scientific and technical information in this news release has been prepared by, or approved by Garrett Ainsworth, P.Geo, President and CEO of the Company. Mr. Ainsworth is a Qualified Person for the purposes of National Instrument 43-101”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The drill results tables provide 'Shale interval Interval (m)' which represents downhole length, but no true width is stated or estimated.
Evidence · table
“Shale interval Interval (m)”
Context: Table 1 - Österkälen nr 101 Black Shale Intervals
Extracted facts
Stored fact records: 44. Some facts used in scoring do not have a stored record.
Drill Results (44)
OST-26-001Österkälen nr 101Intercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- OST-26-001
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 8.6 m
- From
- 48 m
- To
- 56.6 m
- Hole Depth
- 128.7 m
- Intercept Depth
- 48 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-001:48-56.6
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“8.60”
Context: OST-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-001Österkälen nr 101Intercept: 45.6 mView all detailsHide details
Identity
- Hole ID
- OST-26-001
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 45.6 m
- From
- 56.6 m
- To
- 102.2 m
- Hole Depth
- 128.7 m
- Intercept Depth
- 56.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-001:56.6-102.2
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“45.60”
Context: OST-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-001Österkälen nr 101Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-001
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 2.8 m
- From
- 102.2 m
- To
- 105 m
- Hole Depth
- 128.7 m
- Intercept Depth
- 102.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-001:102.2-105
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“2.80”
Context: OST-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-002Österkälen nr 101Intercept: 3.55 mView all detailsHide details
Identity
- Hole ID
- OST-26-002
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 3.55 m
- From
- 36.35 m
- To
- 39.9 m
- Hole Depth
- 123 m
- Intercept Depth
- 36.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-002:36.35-39.9
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“3.55”
Context: OST-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-002Österkälen nr 101Intercept: 7.15 mView all detailsHide details
Identity
- Hole ID
- OST-26-002
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 7.15 m
- From
- 46.95 m
- To
- 54.1 m
- Hole Depth
- 123 m
- Intercept Depth
- 46.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-002:46.95-54.1
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“7.15”
Context: OST-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-002Österkälen nr 101Intercept: 52.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-002
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 52.8 m
- From
- 54.1 m
- To
- 106.9 m
- Hole Depth
- 123 m
- Intercept Depth
- 54.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-002:54.1-106.9
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“52.80”
Context: OST-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-003Österkälen nr 101Intercept: 10.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-003
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 10.8 m
- From
- 16.55 m
- To
- 27.35 m
- Hole Depth
- 100.75 m
- Intercept Depth
- 16.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-003:16.55-27.35
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“10.80”
Context: OST-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-003Österkälen nr 101Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- OST-26-003
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 4 m
- From
- 45 m
- To
- 49 m
- Hole Depth
- 100.75 m
- Intercept Depth
- 45 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-003:45-49
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“4.00”
Context: OST-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-003Österkälen nr 101Intercept: 42.55 mView all detailsHide details
Identity
- Hole ID
- OST-26-003
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 42.55 m
- From
- 49 m
- To
- 91.55 m
- Hole Depth
- 100.75 m
- Intercept Depth
- 49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-003:49-91.55
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“42.55”
Context: OST-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-004Österkälen nr 101Intercept: 10.55 mView all detailsHide details
Identity
- Hole ID
- OST-26-004
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 10.55 m
- From
- 33.35 m
- To
- 43.9 m
- Hole Depth
- 98.7 m
- Intercept Depth
- 33.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-004:33.35-43.9
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“10.55”
Context: OST-26-004
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-004Österkälen nr 101Intercept: 40.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-004
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 40.8 m
- From
- 43.9 m
- To
- 84.7 m
- Hole Depth
- 98.7 m
- Intercept Depth
- 43.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-004:43.9-84.7
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“40.80”
Context: OST-26-004
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-005Österkälen nr 101Intercept: 5.15 mView all detailsHide details
Identity
- Hole ID
- OST-26-005
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 5.15 m
- From
- 47.1 m
- To
- 52.25 m
- Hole Depth
- 107.7 m
- Intercept Depth
- 47.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-005:47.1-52.25
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“5.15”
Context: OST-26-005
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-005Österkälen nr 101Intercept: 45.3 mView all detailsHide details
Identity
- Hole ID
- OST-26-005
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 45.3 m
- From
- 52.25 m
- To
- 97.55 m
- Hole Depth
- 107.7 m
- Intercept Depth
- 52.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-005:52.25-97.55
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“45.30”
Context: OST-26-005
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-006Österkälen nr 101Intercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-006
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 9.8 m
- From
- 43.1 m
- To
- 52.9 m
- Hole Depth
- 114 m
- Intercept Depth
- 43.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-006:43.1-52.9
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“9.80”
Context: OST-26-006
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-006Österkälen nr 101Intercept: 49.2 mView all detailsHide details
Identity
- Hole ID
- OST-26-006
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 49.2 m
- From
- 52.9 m
- To
- 102.1 m
- Hole Depth
- 114 m
- Intercept Depth
- 52.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-006:52.9-102.1
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“49.20”
Context: OST-26-006
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-007Österkälen nr 101Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- OST-26-007
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 14.4 m
- From
- 37.7 m
- To
- 52.1 m
- Hole Depth
- 113.9 m
- Intercept Depth
- 37.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-007:37.7-52.1
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic Black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“14.40”
Context: OST-26-007
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-007Österkälen nr 101Intercept: 50.35 mView all detailsHide details
Identity
- Hole ID
- OST-26-007
- Project
- Österkälen nr 101
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 50.35 m
- From
- 52.1 m
- To
- 102.45 m
- Hole Depth
- 113.9 m
- Intercept Depth
- 52.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-007:52.1-102.45
- Mining Method
- unknown
Location
- Location
- Österkälen
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“50.35”
Context: OST-26-007
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Malgomaj nr 1002 and nr 1003Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 6.1 m
- From
- 38.7 m
- To
- 44.8 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 38.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:38.7-44.8
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“6.10”
Context: MAJ-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Malgomaj nr 1002 and nr 1003Intercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 3.7 m
- From
- 47.3 m
- To
- 51 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 47.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:47.3-51
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“3.70”
Context: MAJ-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Malgomaj nr 1002 and nr 1003Intercept: 68 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 68 m
- From
- 51 m
- To
- 119 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 51 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:51-119
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“68.00”
Context: MAJ-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Malgomaj nr 1002 and nr 1003Intercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 9.7 m
- From
- 119 m
- To
- 128.7 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 119 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:119-128.7
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“9.70”
Context: MAJ-26-001
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Malgomaj nr 1002 and nr 1003Intercept: 17.4 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 17.4 m
- From
- 14.6 m
- To
- 32 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 14.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:14.6-32
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“17.40”
Context: MAJ-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Malgomaj nr 1002 and nr 1003Intercept: 75.75 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 75.75 m
- From
- 49.65 m
- To
- 125.4 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 49.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:49.65-125.4
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“75.75”
Context: MAJ-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Malgomaj nr 1002 and nr 1003Intercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 10.5 m
- From
- 125.4 m
- To
- 135.9 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 125.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:125.4-135.9
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“10.50”
Context: MAJ-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Malgomaj nr 1002 and nr 1003Intercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 5.9 m
- From
- 135.9 m
- To
- 141.8 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 135.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:135.9-141.8
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“5.90”
Context: MAJ-26-002
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Malgomaj nr 1002 and nr 1003Intercept: 19.85 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 19.85 m
- From
- 4.5 m
- To
- 24.35 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 4.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:4.5-24.35
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“19.85”
Context: MAJ-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Malgomaj nr 1002 and nr 1003Intercept: 16.3 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 16.3 m
- From
- 24.35 m
- To
- 40.65 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 24.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:24.35-40.65
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“16.30”
Context: MAJ-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Malgomaj nr 1002 and nr 1003Intercept: 98.4 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 98.4 m
- From
- 55.8 m
- To
- 154.2 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 55.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:55.8-154.2
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“98.40”
Context: MAJ-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Malgomaj nr 1002 and nr 1003Intercept: 6.65 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 6.65 m
- From
- 154.2 m
- To
- 160.85 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 154.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:154.2-160.85
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“6.65”
Context: MAJ-26-003
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-004Malgomaj nr 1002 and nr 1003Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-004
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 2.25 m
- From
- 31.4 m
- To
- 33.65 m
- Hole Depth
- 161.7 m
- Intercept Depth
- 31.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-004:31.4-33.65
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“2.25”
Context: MAJ-26-004
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-004Malgomaj nr 1002 and nr 1003Intercept: 101.25 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-004
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 101.25 m
- From
- 33.65 m
- To
- 134.9 m
- Hole Depth
- 161.7 m
- Intercept Depth
- 33.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-004:33.65-134.9
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“101.25”
Context: MAJ-26-004
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-004Malgomaj nr 1002 and nr 1003Intercept: 7.3 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-004
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 7.3 m
- From
- 134.9 m
- To
- 142.2 m
- Hole Depth
- 161.7 m
- Intercept Depth
- 134.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-004:134.9-142.2
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“7.30”
Context: MAJ-26-004
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-005Malgomaj nr 1002 and nr 1003View all detailsHide details
Identity
- Hole ID
- MAJ-26-005
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Classification
- Program
- exploration
- Sample Type
- drill
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole was abandoned due to ground conditions and core loss, which is a negative for the program, despite indications of the target lithology.
Positive factors
- Drill return indicates black shales, suggesting the target lithology was encountered.
Negative factors
- Drill hole abandoned due to ground conditions and 100% drill core loss, preventing full evaluation.
Evidence · table
“Drill hole abandoned due to ground conditions and 100% drill core loss”
Context: MAJ-26-005
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-006Malgomaj nr 1002 and nr 1003View all detailsHide details
Identity
- Hole ID
- MAJ-26-006
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Classification
- Program
- exploration
- Sample Type
- drill
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole was abandoned due to ground conditions and core loss, which is a negative for the program, despite indications of the target lithology.
Positive factors
- Drill return indicates black shales, suggesting the target lithology was encountered.
Negative factors
- Drill hole abandoned due to ground conditions and 100% drill core loss, preventing full evaluation.
Evidence · table
“Drill hole abandoned due to ground conditions and 100% drill core loss”
Context: MAJ-26-006
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-007Malgomaj nr 1002 and nr 1003Intercept: 56.75 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-007
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 56.75 m
- From
- 11.8 m
- To
- 68.55 m
- Hole Depth
- 107.6 m
- Intercept Depth
- 11.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-007:11.8-68.55
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“56.75”
Context: MAJ-26-007
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-007Malgomaj nr 1002 and nr 1003Intercept: 23.25 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-007
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 23.25 m
- From
- 68.55 m
- To
- 91.8 m
- Hole Depth
- 107.6 m
- Intercept Depth
- 68.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-007:68.55-91.8
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“23.25”
Context: MAJ-26-007
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-007Malgomaj nr 1002 and nr 1003Intercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-007
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 5.9 m
- From
- 91.8 m
- To
- 97.7 m
- Hole Depth
- 107.6 m
- Intercept Depth
- 91.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-007:91.8-97.7
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“5.90”
Context: MAJ-26-007
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-008Malgomaj nr 1002 and nr 1003View all detailsHide details
Identity
- Hole ID
- MAJ-26-008
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Classification
- Program
- exploration
- Sample Type
- drill
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole was abandoned due to ground conditions and core loss, which is a negative for the program, despite indications of the target lithology.
Positive factors
- Drill return indicates black shales, suggesting the target lithology was encountered.
Negative factors
- Drill hole abandoned due to ground conditions and 100% drill core loss, preventing full evaluation.
Evidence · table
“Drill hole abandoned due to ground conditions and 100% drill core loss”
Context: MAJ-26-008
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-009Malgomaj nr 1002 and nr 1003Intercept: 79.4 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-009
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 79.4 m
- From
- 15.4 m
- To
- 94.8 m
- Hole Depth
- 131.8 m
- Intercept Depth
- 15.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-009:15.4-94.8
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“79.40”
Context: MAJ-26-009
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-010Malgomaj nr 1002 and nr 1003Intercept: 38 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-010
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 38 m
- From
- 15.5 m
- To
- 53.5 m
- Hole Depth
- 143.9 m
- Intercept Depth
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-010:15.5-53.5
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“38.00”
Context: MAJ-26-010
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-010Malgomaj nr 1002 and nr 1003Intercept: 21.1 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-010
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 21.1 m
- From
- 57.9 m
- To
- 79 m
- Hole Depth
- 143.9 m
- Intercept Depth
- 57.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-010:57.9-79
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“21.10”
Context: MAJ-26-010
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-010Malgomaj nr 1002 and nr 1003Intercept: 34 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-010
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 34 m
- From
- 79 m
- To
- 113 m
- Hole Depth
- 143.9 m
- Intercept Depth
- 79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-010:79-113
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“34.00”
Context: MAJ-26-010
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-011Malgomaj nr 1002 and nr 1003Intercept: 52.8 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-011
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 52.8 m
- From
- 10 m
- To
- 62.8 m
- Hole Depth
- 113.8 m
- Intercept Depth
- 10 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-011:10-62.8
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target graphitic black shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Graphitic black shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“52.80”
Context: MAJ-26-011
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-011Malgomaj nr 1002 and nr 1003Intercept: 33.8 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-011
- Project
- Malgomaj nr 1002 and nr 1003
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX
Geometry
- Intercept
- 33.8 m
- From
- 62.8 m
- To
- 96.6 m
- Hole Depth
- 113.8 m
- Intercept Depth
- 62.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-011:62.8-96.6
- Mining Method
- unknown
Location
- Location
- Malgomaj
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: The drill hole successfully intersected the target grey-dark grey shale, confirming the geological model, but the economic significance is pending assay results.
Positive factors
- Intersection of target lithology (Grey-dark grey shale) in a first-pass drill hole.
Negative factors
- No assay results for metal content are available yet.
- Only apparent downhole width reported.
Evidence · table
“33.80”
Context: MAJ-26-011
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.