Doubleview Reports Assays from Drill Holes H102-H108, Extends Hat Mineralization Approximately 150m East and Identifies Gold-Enriched Intervals
Original announcement by tmx on
- Company
- Doubleview Gold Corp.
- Ticker
- DBG
- Exchange
- TSX
- Region
- northwestern British Columbia
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver, Cobalt, Scandium oxide
- Document categories
- Drill results
- Extracted
- 2026-09-15 18:53:34 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Doubleview Gold Corp. reports new assay results from drill holes H102-H108 at its Hat Project in northwestern British Columbia. The drilling successfully extended gold-copper mineralization approximately 150m east of the known resource envelope, defining a new Far East Zone, and returned significant gold-enriched intervals including 8.0m grading 4.04 g/t Au. Additionally, holes H102-H105 provided infill data to enhance confidence in the existing resource, although true widths have not been determined and CuEq calculations exclude scandium oxide.
Reasoning: New drill results from the Hat Project significantly extend mineralization to the east, identifying a new Far East Zone with high-grade gold intercepts, and also provide infill data to enhance resource confidence in the existing East Zone.
Positive factors
- Extension of mineralization approximately 150m east of the known resource envelope, opening a new Far East Zone.
- Identification of significant gold-enriched intervals, including 8.0m grading 4.04 g/t Au and 112.0m grading 0.40 g/t Au.
- Drilling in the East Zone (H102-H105) provides additional drill density and continuity data, reinforcing the existing resource interpretation.
- High-grade copper intercept of 1.0m at 3.30% Cu within H102.
Negative factors
- True widths of reported intervals have not been determined, potentially overstating actual thickness.
- Copper Equivalent (CuEq) values exclude scandium oxide, which is noted as a high-value strategic metal.
- Metal equivalent calculations are based on average trailing three-year commodity prices, which may not reflect recent market increases.
- Cut-off grades for compositing are not explicitly disclosed.
Facts used in scoring: 110
Extracted facts
Stored fact records: 110. Some facts used in scoring do not have a stored record.
Drill Results (110)
H102Hat · copperGrade: 0.2Grade Unit: %Intercept: 693 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 693 m
- From
- 6 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:6-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 693.0m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.20”
Context: 693.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 0.09Grade Unit: g/tIntercept: 693 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 693 m
- From
- 6 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:6-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Very long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.09”
Context: 693.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.1Grade Unit: %Intercept: 693 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 693 m
- From
- 6 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:6-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Very long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.10”
Context: 693.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 0.14Grade Unit: g/tIntercept: 693 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 693 m
- From
- 6 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:6-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Very long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.14”
Context: 693.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 54Grade Unit: g/tIntercept: 693 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 54
- Grade Unit
- g/t
- Intercept
- 693 m
- From
- 6 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:6-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low cobalt grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Very long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“54”
Context: 693.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 49.7Grade Unit: g/tIntercept: 693 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 49.7
- Grade Unit
- g/t
- Intercept
- 693 m
- From
- 6 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:6-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Very long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“49.7”
Context: 693.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.23Grade Unit: %Intercept: 453 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 453 m
- From
- 246 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:246-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 453.0m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.23”
Context: 453.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 0.1Grade Unit: g/tIntercept: 453 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 453 m
- From
- 246 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:246-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.10”
Context: 453.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.12Grade Unit: %Intercept: 453 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 453 m
- From
- 246 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:246-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.12”
Context: 453.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 0.16Grade Unit: g/tIntercept: 453 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 453 m
- From
- 246 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:246-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.16”
Context: 453.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 55Grade Unit: g/tIntercept: 453 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 453 m
- From
- 246 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:246-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low cobalt grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“55”
Context: 453.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 54.1Grade Unit: g/tIntercept: 453 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 54.1
- Grade Unit
- g/t
- Intercept
- 453 m
- From
- 246 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:246-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“54.1”
Context: 453.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.83Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.83
- Grade Unit
- %
- Intercept
- 5 m
- From
- 252 m
- To
- 257 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:252-257
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.83
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A narrow, but strong copper equivalent intercept within the broader mineralized zone, indicating higher-grade pockets.
Positive factors
- Strong copper equivalent grade for a porphyry deposit.
Negative factors
- Narrow intercept length.
- True width not determined.
Evidence · table
“0.83”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 0.37Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 252 m
- To
- 257 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:252-257
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A narrow intercept with a low gold grade, contributing to overall mineralization.
Negative factors
- Narrow intercept length.
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.37”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.43Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 5 m
- From
- 252 m
- To
- 257 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:252-257
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A narrow intercept with a moderate copper grade, indicating higher-grade pockets within the broader mineralization.
Positive factors
- Moderate copper grade for a porphyry deposit.
Negative factors
- Narrow intercept length.
- True width not determined.
Evidence · table
“0.43”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 0.41Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 252 m
- To
- 257 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:252-257
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A narrow intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- Narrow intercept length.
- True width not determined.
Evidence · table
“0.41”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 201Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 201
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 252 m
- To
- 257 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:252-257
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A narrow intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- Narrow intercept length.
- True width not determined.
Evidence · table
“201”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 28.4Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 28.4
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 252 m
- To
- 257 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:252-257
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A narrow intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- Narrow intercept length.
- True width not determined.
Evidence · table
“28.4”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.25Grade Unit: %Intercept: 348 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 348 m
- From
- 348 m
- To
- 696 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-696
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 348.0m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.25”
Context: 348.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 0.11Grade Unit: g/tIntercept: 348 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 348 m
- From
- 348 m
- To
- 696 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-696
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.11”
Context: 348.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.13Grade Unit: %Intercept: 348 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 348 m
- From
- 348 m
- To
- 696 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-696
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.13”
Context: 348.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 0.19Grade Unit: g/tIntercept: 348 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 348 m
- From
- 348 m
- To
- 696 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-696
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.19”
Context: 348.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 47Grade Unit: g/tIntercept: 348 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 47
- Grade Unit
- g/t
- Intercept
- 348 m
- From
- 348 m
- To
- 696 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-696
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low cobalt grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“47”
Context: 348.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 53.9Grade Unit: g/tIntercept: 348 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 53.9
- Grade Unit
- g/t
- Intercept
- 348 m
- From
- 348 m
- To
- 696 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-696
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“53.9”
Context: 348.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.35Grade Unit: %Intercept: 46 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 46 m
- From
- 348 m
- To
- 394 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-394
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.35
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low copper equivalent grade, contributing to resource continuity.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.35”
Context: 46.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 0.13Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 46 m
- From
- 348 m
- To
- 394 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-394
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low gold grade, contributing to resource continuity.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.13”
Context: 46.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.2Grade Unit: %Intercept: 46 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 46 m
- From
- 348 m
- To
- 394 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-394
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low copper grade, contributing to resource continuity.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.20”
Context: 46.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 0.19Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 46 m
- From
- 348 m
- To
- 394 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-394
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.19”
Context: 46.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 78Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 78
- Grade Unit
- g/t
- Intercept
- 46 m
- From
- 348 m
- To
- 394 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-394
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“78”
Context: 46.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 62.1Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 62.1
- Grade Unit
- g/t
- Intercept
- 46 m
- From
- 348 m
- To
- 394 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:348-394
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“62.1”
Context: 46.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 5.46Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 5.46
- Grade Unit
- %
- Intercept
- 1 m
- From
- 527 m
- To
- 528 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:527-528
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 5.46
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very high-grade, albeit narrow, copper equivalent intercept, indicating bonanza-grade mineralization within the system.
Positive factors
- Exceptional copper equivalent grade for a porphyry deposit.
Negative factors
- Very narrow intercept length.
- True width not determined.
Evidence · table
“5.46”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 2.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 2.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 527 m
- To
- 528 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:527-528
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very high-grade, albeit narrow, gold intercept, indicating bonanza-grade mineralization within the system.
Positive factors
- Exceptional gold grade for a porphyry deposit.
Negative factors
- Very narrow intercept length.
- True width not determined.
Evidence · table
“2.25”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 3.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 3.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 527 m
- To
- 528 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:527-528
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very high-grade, albeit narrow, copper intercept, indicating bonanza-grade mineralization within the system.
Positive factors
- Exceptional copper grade for a porphyry deposit.
Negative factors
- Very narrow intercept length.
- True width not determined.
Evidence · table
“3.30”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 11Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 11
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 527 m
- To
- 528 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:527-528
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very narrow intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- Very narrow intercept length.
- True width not determined.
Evidence · table
“11.00”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 292Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 292
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 527 m
- To
- 528 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:527-528
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very narrow intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- Very narrow intercept length.
- True width not determined.
Evidence · table
“292”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 28.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 28.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 527 m
- To
- 528 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:527-528
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very narrow intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- Very narrow intercept length.
- True width not determined.
Evidence · table
“28.5”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 1.25Grade Unit: %Intercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 1.25
- Grade Unit
- %
- Intercept
- 17.5 m
- From
- 681.5 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:681.5-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.25
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with an exceptional copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Exceptional copper equivalent grade for a porphyry deposit.
Negative factors
- True width not determined.
Evidence · table
“1.25”
Context: 17.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · goldGrade: 0.67Grade Unit: g/tIntercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 17.5 m
- From
- 681.5 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:681.5-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low gold grade, contributing to overall mineralization.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.67”
Context: 17.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · copperGrade: 0.64Grade Unit: %Intercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 17.5 m
- From
- 681.5 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:681.5-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a moderate copper grade, indicating a significant mineralized zone.
Positive factors
- Moderate copper grade for a porphyry deposit.
Negative factors
- True width not determined.
Evidence · table
“0.64”
Context: 17.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · silverGrade: 0.69Grade Unit: g/tIntercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 17.5 m
- From
- 681.5 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:681.5-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.69”
Context: 17.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · cobaltGrade: 60Grade Unit: g/tIntercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 60
- Grade Unit
- g/t
- Intercept
- 17.5 m
- From
- 681.5 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:681.5-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“60”
Context: 17.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H102Hat · scandium_oxideGrade: 44.1Grade Unit: g/tIntercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- H102
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 44.1
- Grade Unit
- g/t
- Intercept
- 17.5 m
- From
- 681.5 m
- To
- 699 m
- Hole Depth
- 732 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H102:681.5-699
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 0 °
- Dip
- -88.47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“44.1”
Context: 17.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.2Grade Unit: %Intercept: 531 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 531 m
- From
- 9 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:9-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 531.0m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.20”
Context: 531.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.1Grade Unit: g/tIntercept: 531 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 531 m
- From
- 9 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:9-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.10”
Context: 531.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.09Grade Unit: %Intercept: 531 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 531 m
- From
- 9 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:9-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.09”
Context: 531.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.15Grade Unit: g/tIntercept: 531 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 531 m
- From
- 9 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:9-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.15”
Context: 531.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 67Grade Unit: g/tIntercept: 531 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 67
- Grade Unit
- g/t
- Intercept
- 531 m
- From
- 9 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:9-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low cobalt grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“67”
Context: 531.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 39.8Grade Unit: g/tIntercept: 531 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 39.8
- Grade Unit
- g/t
- Intercept
- 531 m
- From
- 9 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:9-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“39.8”
Context: 531.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.29Grade Unit: %Intercept: 80 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 80 m
- From
- 39 m
- To
- 119 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:39-119
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low copper equivalent grade, contributing to resource continuity.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.29”
Context: 80.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.2Grade Unit: g/tIntercept: 80 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 80 m
- From
- 39 m
- To
- 119 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:39-119
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low gold grade, contributing to overall mineralization.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.20”
Context: 80.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.09Grade Unit: %Intercept: 80 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 80 m
- From
- 39 m
- To
- 119 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:39-119
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low copper grade, contributing to overall mineralization.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.09”
Context: 80.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.3Grade Unit: g/tIntercept: 80 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 80 m
- From
- 39 m
- To
- 119 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:39-119
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.30”
Context: 80.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 55Grade Unit: g/tIntercept: 80 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 80 m
- From
- 39 m
- To
- 119 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:39-119
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“55”
Context: 80.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 38.1Grade Unit: g/tIntercept: 80 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 38.1
- Grade Unit
- g/t
- Intercept
- 80 m
- From
- 39 m
- To
- 119 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:39-119
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“38.1”
Context: 80.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.24Grade Unit: %Intercept: 295.7 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 295.7 m
- From
- 236.3 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:236.3-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 295.7m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.24”
Context: 295.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.11Grade Unit: g/tIntercept: 295.7 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 295.7 m
- From
- 236.3 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:236.3-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.11”
Context: 295.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.11Grade Unit: %Intercept: 295.7 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 295.7 m
- From
- 236.3 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:236.3-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.11”
Context: 295.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.13Grade Unit: g/tIntercept: 295.7 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 295.7 m
- From
- 236.3 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:236.3-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.13”
Context: 295.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 81Grade Unit: g/tIntercept: 295.7 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 81
- Grade Unit
- g/t
- Intercept
- 295.7 m
- From
- 236.3 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:236.3-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with a low cobalt grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“81”
Context: 295.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 40.9Grade Unit: g/tIntercept: 295.7 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 40.9
- Grade Unit
- g/t
- Intercept
- 295.7 m
- From
- 236.3 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:236.3-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long sub-interval with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“40.9”
Context: 295.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.4Grade Unit: %Intercept: 145 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 145 m
- From
- 387 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:387-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a moderate copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Moderate copper equivalent grade for a porphyry deposit.
- Long intercept length of 145.0m.
Negative factors
- True width not determined.
Evidence · table
“0.40”
Context: 145.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.19Grade Unit: g/tIntercept: 145 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 145 m
- From
- 387 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:387-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low gold grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.19”
Context: 145.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.2Grade Unit: %Intercept: 145 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 145 m
- From
- 387 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:387-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low copper grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.20”
Context: 145.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.21Grade Unit: g/tIntercept: 145 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 145 m
- From
- 387 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:387-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.21”
Context: 145.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 85Grade Unit: g/tIntercept: 145 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 85
- Grade Unit
- g/t
- Intercept
- 145 m
- From
- 387 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:387-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“85”
Context: 145.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 42.1Grade Unit: g/tIntercept: 145 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 42.1
- Grade Unit
- g/t
- Intercept
- 145 m
- From
- 387 m
- To
- 532 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:387-532
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“42.1”
Context: 145.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.4Grade Unit: %Intercept: 144 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 144 m
- From
- 396 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:396-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a moderate copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Moderate copper equivalent grade for a porphyry deposit.
- Long intercept length of 144.0m.
Negative factors
- True width not determined.
Evidence · table
“0.40”
Context: 144.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.19Grade Unit: g/tIntercept: 144 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 144 m
- From
- 396 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:396-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low gold grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.19”
Context: 144.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.2Grade Unit: %Intercept: 144 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 144 m
- From
- 396 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:396-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low copper grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.20”
Context: 144.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.2Grade Unit: g/tIntercept: 144 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 144 m
- From
- 396 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:396-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.20”
Context: 144.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 78Grade Unit: g/tIntercept: 144 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 78
- Grade Unit
- g/t
- Intercept
- 144 m
- From
- 396 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:396-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“78”
Context: 144.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 42.2Grade Unit: g/tIntercept: 144 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 42.2
- Grade Unit
- g/t
- Intercept
- 144 m
- From
- 396 m
- To
- 540 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:396-540
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“42.2”
Context: 144.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.5Grade Unit: %Intercept: 90 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 90 m
- From
- 399 m
- To
- 489 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:399-489
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good length intercept with a moderate copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Moderate copper equivalent grade for a porphyry deposit.
- Good intercept length of 90.0m.
Negative factors
- True width not determined.
Evidence · table
“0.50”
Context: 90.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.27Grade Unit: g/tIntercept: 90 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 90 m
- From
- 399 m
- To
- 489 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:399-489
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good length intercept with a low gold grade, contributing to overall mineralization.
Positive factors
- Good intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.27”
Context: 90.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.24Grade Unit: %Intercept: 90 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 90 m
- From
- 399 m
- To
- 489 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:399-489
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good length intercept with a low copper grade, contributing to overall mineralization.
Positive factors
- Good intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.24”
Context: 90.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.24Grade Unit: g/tIntercept: 90 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 90 m
- From
- 399 m
- To
- 489 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:399-489
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good length intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Good intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.24”
Context: 90.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 81Grade Unit: g/tIntercept: 90 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 81
- Grade Unit
- g/t
- Intercept
- 90 m
- From
- 399 m
- To
- 489 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:399-489
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good length intercept with a low cobalt grade, contributing to overall mineralization.
Positive factors
- Good intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“81”
Context: 90.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 46.2Grade Unit: g/tIntercept: 90 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 46.2
- Grade Unit
- g/t
- Intercept
- 90 m
- From
- 399 m
- To
- 489 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:399-489
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good length intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Good intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“46.2”
Context: 90.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.96Grade Unit: %Intercept: 26.1 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.96
- Grade Unit
- %
- Intercept
- 26.1 m
- From
- 406.5 m
- To
- 432.6 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:406.5-432.6
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.96
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with an exceptional copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Exceptional copper equivalent grade for a porphyry deposit.
Negative factors
- True width not determined.
Evidence · table
“0.96”
Context: 26.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · goldGrade: 0.63Grade Unit: g/tIntercept: 26.1 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 26.1 m
- From
- 406.5 m
- To
- 432.6 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:406.5-432.6
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low gold grade, contributing to overall mineralization.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.63”
Context: 26.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · copperGrade: 0.38Grade Unit: %Intercept: 26.1 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 26.1 m
- From
- 406.5 m
- To
- 432.6 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:406.5-432.6
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low copper grade, contributing to overall mineralization.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.38”
Context: 26.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · silverGrade: 0.25Grade Unit: g/tIntercept: 26.1 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 26.1 m
- From
- 406.5 m
- To
- 432.6 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:406.5-432.6
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.25”
Context: 26.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · cobaltGrade: 100Grade Unit: g/tIntercept: 26.1 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 100
- Grade Unit
- g/t
- Intercept
- 26.1 m
- From
- 406.5 m
- To
- 432.6 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:406.5-432.6
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“100”
Context: 26.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H103Hat · scandium_oxideGrade: 51Grade Unit: g/tIntercept: 26.1 mView all detailsHide details
Identity
- Hole ID
- H103
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 51
- Grade Unit
- g/t
- Intercept
- 26.1 m
- From
- 406.5 m
- To
- 432.6 m
- Hole Depth
- 720 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H103:406.5-432.6
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 135 °
- Dip
- -67.84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“51”
Context: 26.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.22Grade Unit: %Intercept: 39 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 39 m
- From
- 12 m
- To
- 51 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:12-51
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low copper equivalent grade, contributing to resource continuity.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.22”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · goldGrade: 0.14Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 12 m
- To
- 51 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:12-51
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low gold grade, contributing to overall mineralization.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.14”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.08Grade Unit: %Intercept: 39 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 39 m
- From
- 12 m
- To
- 51 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:12-51
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low copper grade, contributing to overall mineralization.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.08”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · silverGrade: 0.27Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 12 m
- To
- 51 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:12-51
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.27”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · cobaltGrade: 47Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 47
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 12 m
- To
- 51 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:12-51
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“47”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · scandium_oxideGrade: 37.3Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 37.3
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 12 m
- To
- 51 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:12-51
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A moderate length intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“37.3”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.39Grade Unit: %Intercept: 259 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 259 m
- From
- 425 m
- To
- 684 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:425-684
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 259.0m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.39”
Context: 259.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · goldGrade: 0.16Grade Unit: g/tIntercept: 259 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 259 m
- From
- 425 m
- To
- 684 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:425-684
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low gold grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.16”
Context: 259.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.23Grade Unit: %Intercept: 259 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 259 m
- From
- 425 m
- To
- 684 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:425-684
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low copper grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.23”
Context: 259.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · silverGrade: 0.31Grade Unit: g/tIntercept: 259 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 259 m
- From
- 425 m
- To
- 684 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:425-684
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.31”
Context: 259.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · cobaltGrade: 60Grade Unit: g/tIntercept: 259 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 60
- Grade Unit
- g/t
- Intercept
- 259 m
- From
- 425 m
- To
- 684 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:425-684
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“60”
Context: 259.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · scandium_oxideGrade: 44Grade Unit: g/tIntercept: 259 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 44
- Grade Unit
- g/t
- Intercept
- 259 m
- From
- 425 m
- To
- 684 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:425-684
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“44”
Context: 259.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.47Grade Unit: %Intercept: 142 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 142 m
- From
- 426 m
- To
- 568 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:426-568
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a moderate copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Moderate copper equivalent grade for a porphyry deposit.
- Long intercept length of 142.0m.
Negative factors
- True width not determined.
Evidence · table
“0.47”
Context: 142.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · goldGrade: 0.19Grade Unit: g/tIntercept: 142 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 142 m
- From
- 426 m
- To
- 568 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:426-568
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low gold grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.19”
Context: 142.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.28Grade Unit: %Intercept: 142 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 142 m
- From
- 426 m
- To
- 568 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:426-568
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low copper grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low copper grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.28”
Context: 142.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · silverGrade: 0.33Grade Unit: g/tIntercept: 142 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 142 m
- From
- 426 m
- To
- 568 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:426-568
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Positive factors
- Long intercept length.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.33”
Context: 142.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · cobaltGrade: 73Grade Unit: g/tIntercept: 142 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 73
- Grade Unit
- g/t
- Intercept
- 142 m
- From
- 426 m
- To
- 568 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:426-568
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization.
Positive factors
- Long intercept length.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“73”
Context: 142.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · scandium_oxideGrade: 38.9Grade Unit: g/tIntercept: 142 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 38.9
- Grade Unit
- g/t
- Intercept
- 142 m
- From
- 426 m
- To
- 568 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:426-568
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Long intercept length.
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“38.9”
Context: 142.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 1.22Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 1.22
- Grade Unit
- %
- Intercept
- 23 m
- From
- 460 m
- To
- 483 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:460-483
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.22
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with an exceptional copper equivalent grade, indicating a significant mineralized zone.
Positive factors
- Exceptional copper equivalent grade for a porphyry deposit.
Negative factors
- True width not determined.
Evidence · table
“1.22”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · goldGrade: 0.45Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 460 m
- To
- 483 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:460-483
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a moderate gold grade, contributing to overall mineralization.
Positive factors
- Moderate gold grade for a porphyry deposit.
Negative factors
- True width not determined.
Evidence · table
“0.45”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · copperGrade: 0.78Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 23 m
- From
- 460 m
- To
- 483 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:460-483
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a moderate copper grade, indicating a significant mineralized zone.
Positive factors
- Moderate copper grade for a porphyry deposit.
Negative factors
- True width not determined.
Evidence · table
“0.78”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · silverGrade: 0.76Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 460 m
- To
- 483 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:460-483
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own.
Negative factors
- Very low silver grade.
- True width not determined.
Evidence · table
“0.76”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · cobaltGrade: 114Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- cobalt
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 114
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 460 m
- To
- 483 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:460-483
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization.
Negative factors
- Low cobalt grade.
- True width not determined.
Evidence · table
“114”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H104Hat · scandium_oxideGrade: 43.6Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- H104
- Project
- Hat
- Commodity
- scandium_oxide
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 43.6
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 460 m
- To
- 483 m
- Hole Depth
- 702 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H104:460-483
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 167 °
- Dip
- -75.79 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization.
Positive factors
- Scandium is a high-value strategic alloy metal.
Negative factors
- True width not determined.
Evidence · table
“43.6”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H105Hat · copperGrade: 0.21Grade Unit: %Intercept: 427.1 mView all detailsHide details
Identity
- Hole ID
- H105
- Project
- Hat
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 427.1 m
- From
- 18 m
- To
- 445.1 m
- Hole Depth
- 663 m
- Intercept Depth
- 18 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H105:18-445.1
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 30 °
- Dip
- -80.72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length of 427.1m.
Negative factors
- Low copper equivalent grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.21”
Context: 427.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
H105Hat · goldGrade: 0.11Grade Unit: g/tIntercept: 427.1 mView all detailsHide details
Identity
- Hole ID
- H105
- Project
- Hat
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- DBG
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 427.1 m
- From
- 18 m
- To
- 445.1 m
- Hole Depth
- 663 m
- Intercept Depth
- 18 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- H105:18-445.1
- Mining Method
- open_pit
Location
- Location
- East Zone
- Easting
- 348203
- Northing
- 6453897
- CRS
- NAD83 / UTM Zone 9N
- Elevation
- 972 m
- Azimuth
- 30 °
- Dip
- -80.72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-09T00:00:00.000Z
Reasoning: A very long intercept with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity.
Positive factors
- Long intercept length.
Negative factors
- Low gold grade for a porphyry deposit.
- True width not determined.
Evidence · table
“0.11”
Context: 427.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.