# Doubleview Reports Assays from Drill Holes H102-H108, Extends Hat Mineralization Approximately 150m East and Identifies Gold-Enriched Intervals Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d Original source: https://money.tmx.com/en/quote/DBG/news/7284002720686312/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization- Publisher: tmx Original announcement: 2026-06-09T09:30:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Doubleview Gold Corp. - Ticker: DBG - Exchange: TSX - Region: northwestern British Columbia - Primary commodity: Gold - Secondary commodities: Copper, Silver, Cobalt, Scandium oxide - Document categories: Drill results - Extracted: 2026-09-15 18:53:34 UTC Narrative sentiment: 0.80 · Bullish ## Minestarters Atlas summary Doubleview Gold Corp. reports new assay results from drill holes H102-H108 at its Hat Project in northwestern British Columbia. The drilling successfully extended gold-copper mineralization approximately 150m east of the known resource envelope, defining a new Far East Zone, and returned significant gold-enriched intervals including 8.0m grading 4.04 g/t Au. Additionally, holes H102-H105 provided infill data to enhance confidence in the existing resource, although true widths have not been determined and CuEq calculations exclude scandium oxide. Reasoning: New drill results from the Hat Project significantly extend mineralization to the east, identifying a new Far East Zone with high-grade gold intercepts, and also provide infill data to enhance resource confidence in the existing East Zone. - Positive factor: Extension of mineralization approximately 150m east of the known resource envelope, opening a new Far East Zone. - Positive factor: Identification of significant gold-enriched intervals, including 8.0m grading 4.04 g/t Au and 112.0m grading 0.40 g/t Au. - Positive factor: Drilling in the East Zone \(H102-H105\) provides additional drill density and continuity data, reinforcing the existing resource interpretation. - Positive factor: High-grade copper intercept of 1.0m at 3.30% Cu within H102. - Negative factor: True widths of reported intervals have not been determined, potentially overstating actual thickness. - Negative factor: Copper Equivalent \(CuEq\) values exclude scandium oxide, which is noted as a high-value strategic metal. - Negative factor: Metal equivalent calculations are based on average trailing three-year commodity prices, which may not reflect recent market increases. - Negative factor: Cut-off grades for compositing are not explicitly disclosed. Facts used in scoring: 110 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 110. Some facts used in scoring do not have a stored record. ## Drill Results (110) ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-0) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 693 m - From: 6 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:6-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.2 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 693.0m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 693.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-1) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.09 - Grade Unit: g/t - Intercept: 693 m - From: 6 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:6-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Very long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.09 Context: 693.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-2) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.1 - Grade Unit: % - Intercept: 693 m - From: 6 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:6-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Very long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.10 Context: 693.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-3) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.14 - Grade Unit: g/t - Intercept: 693 m - From: 6 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:6-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Very long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.14 Context: 693.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-4) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 54 - Grade Unit: g/t - Intercept: 693 m - From: 6 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:6-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low cobalt grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Very long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 54 Context: 693.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-5) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 49.7 - Grade Unit: g/t - Intercept: 693 m - From: 6 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:6-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Very long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 49.7 Context: 693.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-6) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.23 - Grade Unit: % - Intercept: 453 m - From: 246 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:246-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.23 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 453.0m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.23 Context: 453.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-7) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.1 - Grade Unit: g/t - Intercept: 453 m - From: 246 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:246-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.10 Context: 453.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-8) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.12 - Grade Unit: % - Intercept: 453 m - From: 246 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:246-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.12 Context: 453.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-9) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.16 - Grade Unit: g/t - Intercept: 453 m - From: 246 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:246-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.16 Context: 453.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-10) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 55 - Grade Unit: g/t - Intercept: 453 m - From: 246 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:246-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low cobalt grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 55 Context: 453.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-11) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 54.1 - Grade Unit: g/t - Intercept: 453 m - From: 246 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:246-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 54.1 Context: 453.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-12) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.83 - Grade Unit: % - Intercept: 5 m - From: 252 m - To: 257 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:252-257 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.83 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A narrow, but strong copper equivalent intercept within the broader mineralized zone, indicating higher-grade pockets. - Positive factor: Strong copper equivalent grade for a porphyry deposit. - Negative factor: Narrow intercept length. - Negative factor: True width not determined. Evidence · table > 0.83 Context: 5.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-13) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.37 - Grade Unit: g/t - Intercept: 5 m - From: 252 m - To: 257 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:252-257 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A narrow intercept with a low gold grade, contributing to overall mineralization. - Negative factor: Narrow intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.37 Context: 5.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-14) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.43 - Grade Unit: % - Intercept: 5 m - From: 252 m - To: 257 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:252-257 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A narrow intercept with a moderate copper grade, indicating higher-grade pockets within the broader mineralization. - Positive factor: Moderate copper grade for a porphyry deposit. - Negative factor: Narrow intercept length. - Negative factor: True width not determined. Evidence · table > 0.43 Context: 5.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-15) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.41 - Grade Unit: g/t - Intercept: 5 m - From: 252 m - To: 257 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:252-257 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A narrow intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: Narrow intercept length. - Negative factor: True width not determined. Evidence · table > 0.41 Context: 5.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-16) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 201 - Grade Unit: g/t - Intercept: 5 m - From: 252 m - To: 257 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:252-257 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A narrow intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: Narrow intercept length. - Negative factor: True width not determined. Evidence · table > 201 Context: 5.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-17) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 28.4 - Grade Unit: g/t - Intercept: 5 m - From: 252 m - To: 257 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:252-257 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A narrow intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: Narrow intercept length. - Negative factor: True width not determined. Evidence · table > 28.4 Context: 5.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-18) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.25 - Grade Unit: % - Intercept: 348 m - From: 348 m - To: 696 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-696 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 348.0m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.25 Context: 348.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-19) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.11 - Grade Unit: g/t - Intercept: 348 m - From: 348 m - To: 696 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-696 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.11 Context: 348.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-20) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.13 - Grade Unit: % - Intercept: 348 m - From: 348 m - To: 696 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-696 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.13 Context: 348.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-21) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.19 - Grade Unit: g/t - Intercept: 348 m - From: 348 m - To: 696 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-696 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.19 Context: 348.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-22) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 47 - Grade Unit: g/t - Intercept: 348 m - From: 348 m - To: 696 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-696 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low cobalt grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 47 Context: 348.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-23) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 53.9 - Grade Unit: g/t - Intercept: 348 m - From: 348 m - To: 696 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-696 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 53.9 Context: 348.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-24) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.35 - Grade Unit: % - Intercept: 46 m - From: 348 m - To: 394 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-394 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.35 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low copper equivalent grade, contributing to resource continuity. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.35 Context: 46.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-25) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.13 - Grade Unit: g/t - Intercept: 46 m - From: 348 m - To: 394 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-394 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low gold grade, contributing to resource continuity. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.13 Context: 46.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-26) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 46 m - From: 348 m - To: 394 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-394 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low copper grade, contributing to resource continuity. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 46.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-27) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.19 - Grade Unit: g/t - Intercept: 46 m - From: 348 m - To: 394 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-394 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.19 Context: 46.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-28) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 78 - Grade Unit: g/t - Intercept: 46 m - From: 348 m - To: 394 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-394 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 78 Context: 46.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-29) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 62.1 - Grade Unit: g/t - Intercept: 46 m - From: 348 m - To: 394 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:348-394 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 62.1 Context: 46.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-30) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 5.46 - Grade Unit: % - Intercept: 1 m - From: 527 m - To: 528 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:527-528 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 5.46 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very high-grade, albeit narrow, copper equivalent intercept, indicating bonanza-grade mineralization within the system. - Positive factor: Exceptional copper equivalent grade for a porphyry deposit. - Negative factor: Very narrow intercept length. - Negative factor: True width not determined. Evidence · table > 5.46 Context: 1.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-31) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 2.25 - Grade Unit: g/t - Intercept: 1 m - From: 527 m - To: 528 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:527-528 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very high-grade, albeit narrow, gold intercept, indicating bonanza-grade mineralization within the system. - Positive factor: Exceptional gold grade for a porphyry deposit. - Negative factor: Very narrow intercept length. - Negative factor: True width not determined. Evidence · table > 2.25 Context: 1.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-32) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 3.3 - Grade Unit: % - Intercept: 1 m - From: 527 m - To: 528 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:527-528 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very high-grade, albeit narrow, copper intercept, indicating bonanza-grade mineralization within the system. - Positive factor: Exceptional copper grade for a porphyry deposit. - Negative factor: Very narrow intercept length. - Negative factor: True width not determined. Evidence · table > 3.30 Context: 1.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-33) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 11 - Grade Unit: g/t - Intercept: 1 m - From: 527 m - To: 528 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:527-528 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very narrow intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: Very narrow intercept length. - Negative factor: True width not determined. Evidence · table > 11.00 Context: 1.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-34) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 292 - Grade Unit: g/t - Intercept: 1 m - From: 527 m - To: 528 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:527-528 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very narrow intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: Very narrow intercept length. - Negative factor: True width not determined. Evidence · table > 292 Context: 1.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-35) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 28.5 - Grade Unit: g/t - Intercept: 1 m - From: 527 m - To: 528 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:527-528 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very narrow intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: Very narrow intercept length. - Negative factor: True width not determined. Evidence · table > 28.5 Context: 1.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-36) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 1.25 - Grade Unit: % - Intercept: 17.5 m - From: 681.5 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:681.5-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 1.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with an exceptional copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Exceptional copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 1.25 Context: 17.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-37) Hat · gold #### Identity - Hole ID: H102 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.67 - Grade Unit: g/t - Intercept: 17.5 m - From: 681.5 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:681.5-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low gold grade, contributing to overall mineralization. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.67 Context: 17.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-38) Hat · copper #### Identity - Hole ID: H102 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.64 - Grade Unit: % - Intercept: 17.5 m - From: 681.5 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:681.5-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a moderate copper grade, indicating a significant mineralized zone. - Positive factor: Moderate copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.64 Context: 17.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-39) Hat · silver #### Identity - Hole ID: H102 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.69 - Grade Unit: g/t - Intercept: 17.5 m - From: 681.5 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:681.5-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.69 Context: 17.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-40) Hat · cobalt #### Identity - Hole ID: H102 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 60 - Grade Unit: g/t - Intercept: 17.5 m - From: 681.5 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:681.5-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 60 Context: 17.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H102 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-41) Hat · scandium\_oxide #### Identity - Hole ID: H102 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 44.1 - Grade Unit: g/t - Intercept: 17.5 m - From: 681.5 m - To: 699 m - Hole Depth: 732 m - Intercept Depth: 6 m #### Classification - Program: resource - Sample Type: drill - Group ID: H102:681.5-699 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 0 ° - Dip: -88.47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 44.1 Context: 17.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-42) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 531 m - From: 9 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:9-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.2 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 531.0m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 531.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-43) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.1 - Grade Unit: g/t - Intercept: 531 m - From: 9 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:9-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.10 Context: 531.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-44) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.09 - Grade Unit: % - Intercept: 531 m - From: 9 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:9-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.09 Context: 531.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-45) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.15 - Grade Unit: g/t - Intercept: 531 m - From: 9 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:9-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.15 Context: 531.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-46) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 67 - Grade Unit: g/t - Intercept: 531 m - From: 9 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:9-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low cobalt grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 67 Context: 531.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-47) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 39.8 - Grade Unit: g/t - Intercept: 531 m - From: 9 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:9-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 39.8 Context: 531.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-48) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.29 - Grade Unit: % - Intercept: 80 m - From: 39 m - To: 119 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:39-119 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.29 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low copper equivalent grade, contributing to resource continuity. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.29 Context: 80.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-49) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: g/t - Intercept: 80 m - From: 39 m - To: 119 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:39-119 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low gold grade, contributing to overall mineralization. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 80.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-50) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.09 - Grade Unit: % - Intercept: 80 m - From: 39 m - To: 119 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:39-119 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low copper grade, contributing to overall mineralization. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.09 Context: 80.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-51) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.3 - Grade Unit: g/t - Intercept: 80 m - From: 39 m - To: 119 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:39-119 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.30 Context: 80.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-52) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 55 - Grade Unit: g/t - Intercept: 80 m - From: 39 m - To: 119 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:39-119 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 55 Context: 80.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-53) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 38.1 - Grade Unit: g/t - Intercept: 80 m - From: 39 m - To: 119 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:39-119 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 38.1 Context: 80.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-54) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.24 - Grade Unit: % - Intercept: 295.7 m - From: 236.3 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:236.3-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.24 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 295.7m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.24 Context: 295.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-55) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.11 - Grade Unit: g/t - Intercept: 295.7 m - From: 236.3 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:236.3-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.11 Context: 295.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-56) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 295.7 m - From: 236.3 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:236.3-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low copper grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.11 Context: 295.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-57) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.13 - Grade Unit: g/t - Intercept: 295.7 m - From: 236.3 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:236.3-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.13 Context: 295.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-58) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 81 - Grade Unit: g/t - Intercept: 295.7 m - From: 236.3 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:236.3-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with a low cobalt grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 81 Context: 295.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-59) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 40.9 - Grade Unit: g/t - Intercept: 295.7 m - From: 236.3 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:236.3-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long sub-interval with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 40.9 Context: 295.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-60) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 145 m - From: 387 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:387-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.4 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a moderate copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Moderate copper equivalent grade for a porphyry deposit. - Positive factor: Long intercept length of 145.0m. - Negative factor: True width not determined. Evidence · table > 0.40 Context: 145.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-61) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.19 - Grade Unit: g/t - Intercept: 145 m - From: 387 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:387-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low gold grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.19 Context: 145.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-62) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 145 m - From: 387 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:387-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low copper grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 145.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-63) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.21 - Grade Unit: g/t - Intercept: 145 m - From: 387 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:387-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.21 Context: 145.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-64) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 85 - Grade Unit: g/t - Intercept: 145 m - From: 387 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:387-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 85 Context: 145.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-65) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 42.1 - Grade Unit: g/t - Intercept: 145 m - From: 387 m - To: 532 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:387-532 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 42.1 Context: 145.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-66) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 144 m - From: 396 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:396-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.4 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a moderate copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Moderate copper equivalent grade for a porphyry deposit. - Positive factor: Long intercept length of 144.0m. - Negative factor: True width not determined. Evidence · table > 0.40 Context: 144.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-67) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.19 - Grade Unit: g/t - Intercept: 144 m - From: 396 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:396-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low gold grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.19 Context: 144.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-68) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 144 m - From: 396 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:396-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low copper grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 144.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-69) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.2 - Grade Unit: g/t - Intercept: 144 m - From: 396 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:396-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.20 Context: 144.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-70) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 78 - Grade Unit: g/t - Intercept: 144 m - From: 396 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:396-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 78 Context: 144.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-71) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 42.2 - Grade Unit: g/t - Intercept: 144 m - From: 396 m - To: 540 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:396-540 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 42.2 Context: 144.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-72) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.5 - Grade Unit: % - Intercept: 90 m - From: 399 m - To: 489 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:399-489 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good length intercept with a moderate copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Moderate copper equivalent grade for a porphyry deposit. - Positive factor: Good intercept length of 90.0m. - Negative factor: True width not determined. Evidence · table > 0.50 Context: 90.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-73) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.27 - Grade Unit: g/t - Intercept: 90 m - From: 399 m - To: 489 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:399-489 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good length intercept with a low gold grade, contributing to overall mineralization. - Positive factor: Good intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.27 Context: 90.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-74) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.24 - Grade Unit: % - Intercept: 90 m - From: 399 m - To: 489 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:399-489 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good length intercept with a low copper grade, contributing to overall mineralization. - Positive factor: Good intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.24 Context: 90.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-75) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.24 - Grade Unit: g/t - Intercept: 90 m - From: 399 m - To: 489 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:399-489 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good length intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Good intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.24 Context: 90.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-76) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 81 - Grade Unit: g/t - Intercept: 90 m - From: 399 m - To: 489 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:399-489 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good length intercept with a low cobalt grade, contributing to overall mineralization. - Positive factor: Good intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 81 Context: 90.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-77) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 46.2 - Grade Unit: g/t - Intercept: 90 m - From: 399 m - To: 489 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:399-489 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good length intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Good intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 46.2 Context: 90.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-78) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.96 - Grade Unit: % - Intercept: 26.1 m - From: 406.5 m - To: 432.6 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:406.5-432.6 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.96 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with an exceptional copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Exceptional copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.96 Context: 26.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-79) Hat · gold #### Identity - Hole ID: H103 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.63 - Grade Unit: g/t - Intercept: 26.1 m - From: 406.5 m - To: 432.6 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:406.5-432.6 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low gold grade, contributing to overall mineralization. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.63 Context: 26.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-80) Hat · copper #### Identity - Hole ID: H103 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.38 - Grade Unit: % - Intercept: 26.1 m - From: 406.5 m - To: 432.6 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:406.5-432.6 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low copper grade, contributing to overall mineralization. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.38 Context: 26.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-81) Hat · silver #### Identity - Hole ID: H103 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.25 - Grade Unit: g/t - Intercept: 26.1 m - From: 406.5 m - To: 432.6 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:406.5-432.6 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.25 Context: 26.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-82) Hat · cobalt #### Identity - Hole ID: H103 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 100 - Grade Unit: g/t - Intercept: 26.1 m - From: 406.5 m - To: 432.6 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:406.5-432.6 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 100 Context: 26.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H103 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-83) Hat · scandium\_oxide #### Identity - Hole ID: H103 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 51 - Grade Unit: g/t - Intercept: 26.1 m - From: 406.5 m - To: 432.6 m - Hole Depth: 720 m - Intercept Depth: 9 m #### Classification - Program: resource - Sample Type: drill - Group ID: H103:406.5-432.6 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 135 ° - Dip: -67.84 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 51 Context: 26.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-84) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.22 - Grade Unit: % - Intercept: 39 m - From: 12 m - To: 51 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:12-51 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.22 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low copper equivalent grade, contributing to resource continuity. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.22 Context: 39.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-85) Hat · gold #### Identity - Hole ID: H104 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.14 - Grade Unit: g/t - Intercept: 39 m - From: 12 m - To: 51 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:12-51 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low gold grade, contributing to overall mineralization. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.14 Context: 39.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-86) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 39 m - From: 12 m - To: 51 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:12-51 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low copper grade, contributing to overall mineralization. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.08 Context: 39.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-87) Hat · silver #### Identity - Hole ID: H104 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.27 - Grade Unit: g/t - Intercept: 39 m - From: 12 m - To: 51 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:12-51 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.27 Context: 39.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-88) Hat · cobalt #### Identity - Hole ID: H104 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 47 - Grade Unit: g/t - Intercept: 39 m - From: 12 m - To: 51 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:12-51 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 47 Context: 39.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-89) Hat · scandium\_oxide #### Identity - Hole ID: H104 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 37.3 - Grade Unit: g/t - Intercept: 39 m - From: 12 m - To: 51 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:12-51 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A moderate length intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 37.3 Context: 39.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-90) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.39 - Grade Unit: % - Intercept: 259 m - From: 425 m - To: 684 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:425-684 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.39 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 259.0m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.39 Context: 259.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-91) Hat · gold #### Identity - Hole ID: H104 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.16 - Grade Unit: g/t - Intercept: 259 m - From: 425 m - To: 684 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:425-684 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low gold grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.16 Context: 259.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-92) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.23 - Grade Unit: % - Intercept: 259 m - From: 425 m - To: 684 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:425-684 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low copper grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.23 Context: 259.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-93) Hat · silver #### Identity - Hole ID: H104 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.31 - Grade Unit: g/t - Intercept: 259 m - From: 425 m - To: 684 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:425-684 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.31 Context: 259.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-94) Hat · cobalt #### Identity - Hole ID: H104 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 60 - Grade Unit: g/t - Intercept: 259 m - From: 425 m - To: 684 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:425-684 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 60 Context: 259.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-95) Hat · scandium\_oxide #### Identity - Hole ID: H104 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 44 - Grade Unit: g/t - Intercept: 259 m - From: 425 m - To: 684 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:425-684 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 44 Context: 259.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-96) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.47 - Grade Unit: % - Intercept: 142 m - From: 426 m - To: 568 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:426-568 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.47 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a moderate copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Moderate copper equivalent grade for a porphyry deposit. - Positive factor: Long intercept length of 142.0m. - Negative factor: True width not determined. Evidence · table > 0.47 Context: 142.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-97) Hat · gold #### Identity - Hole ID: H104 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.19 - Grade Unit: g/t - Intercept: 142 m - From: 426 m - To: 568 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:426-568 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low gold grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.19 Context: 142.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-98) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.28 - Grade Unit: % - Intercept: 142 m - From: 426 m - To: 568 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:426-568 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low copper grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.28 Context: 142.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-99) Hat · silver #### Identity - Hole ID: H104 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.33 - Grade Unit: g/t - Intercept: 142 m - From: 426 m - To: 568 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:426-568 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Positive factor: Long intercept length. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.33 Context: 142.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-100) Hat · cobalt #### Identity - Hole ID: H104 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 73 - Grade Unit: g/t - Intercept: 142 m - From: 426 m - To: 568 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:426-568 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with a low cobalt grade, contributing to overall mineralization. - Positive factor: Long intercept length. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 73 Context: 142.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-101) Hat · scandium\_oxide #### Identity - Hole ID: H104 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 38.9 - Grade Unit: g/t - Intercept: 142 m - From: 426 m - To: 568 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:426-568 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A long intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Long intercept length. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 38.9 Context: 142.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-102) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 1.22 - Grade Unit: % - Intercept: 23 m - From: 460 m - To: 483 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:460-483 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 1.22 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with an exceptional copper equivalent grade, indicating a significant mineralized zone. - Positive factor: Exceptional copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 1.22 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-103) Hat · gold #### Identity - Hole ID: H104 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.45 - Grade Unit: g/t - Intercept: 23 m - From: 460 m - To: 483 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:460-483 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a moderate gold grade, contributing to overall mineralization. - Positive factor: Moderate gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.45 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-104) Hat · copper #### Identity - Hole ID: H104 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.78 - Grade Unit: % - Intercept: 23 m - From: 460 m - To: 483 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:460-483 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a moderate copper grade, indicating a significant mineralized zone. - Positive factor: Moderate copper grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.78 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-105) Hat · silver #### Identity - Hole ID: H104 - Project: Hat - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.76 - Grade Unit: g/t - Intercept: 23 m - From: 460 m - To: 483 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:460-483 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a very low silver grade, contributing to overall mineralization but not economically significant on its own. - Negative factor: Very low silver grade. - Negative factor: True width not determined. Evidence · table > 0.76 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-106) Hat · cobalt #### Identity - Hole ID: H104 - Project: Hat - Commodity: cobalt - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 114 - Grade Unit: g/t - Intercept: 23 m - From: 460 m - To: 483 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:460-483 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with a low cobalt grade, contributing to overall mineralization. - Negative factor: Low cobalt grade. - Negative factor: True width not determined. Evidence · table > 114 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H104 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-107) Hat · scandium\_oxide #### Identity - Hole ID: H104 - Project: Hat - Commodity: scandium\_oxide - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 43.6 - Grade Unit: g/t - Intercept: 23 m - From: 460 m - To: 483 m - Hole Depth: 702 m - Intercept Depth: 12 m #### Classification - Program: resource - Sample Type: drill - Group ID: H104:460-483 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 167 ° - Dip: -75.79 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A good width intercept with scandium oxide, a strategic metal, contributing to overall mineralization. - Positive factor: Scandium is a high-value strategic alloy metal. - Negative factor: True width not determined. Evidence · table > 43.6 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H105 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-108) Hat · copper #### Identity - Hole ID: H105 - Project: Hat - Commodity: copper - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.21 - Grade Unit: % - Intercept: 427.1 m - From: 18 m - To: 445.1 m - Hole Depth: 663 m - Intercept Depth: 18 m #### Classification - Program: resource - Sample Type: drill - Group ID: H105:18-445.1 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 30 ° - Dip: -80.72 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Metal Eq. Grade: 0.21 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low copper equivalent grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length of 427.1m. - Negative factor: Low copper equivalent grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.21 Context: 427.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### H105 [Link to this fact](https://atlas-extractions.minestarters.com/news/doubleview-reports-assays-from-drill-holes-h102-h108-extends-hat-mineralization--7c9b10db-9e7c-48f4-b483-c2f57024c66d#fact-drill-facts-109) Hat · gold #### Identity - Hole ID: H105 - Project: Hat - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: DBG #### Geometry - Grade: 0.11 - Grade Unit: g/t - Intercept: 427.1 m - From: 18 m - To: 445.1 m - Hole Depth: 663 m - Intercept Depth: 18 m #### Classification - Program: resource - Sample Type: drill - Group ID: H105:18-445.1 - Mining Method: open\_pit #### Location - Location: East Zone - Easting: 348203 - Northing: 6453897 - CRS: NAD83 / UTM Zone 9N - Elevation: 972 m - Azimuth: 30 ° - Dip: -80.72 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: AGAT Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: No #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-06-09T00:00:00.000Z Reasoning: A very long intercept with a low gold grade, typical for bulk tonnage porphyry systems, contributing to resource continuity. - Positive factor: Long intercept length. - Negative factor: Low gold grade for a porphyry deposit. - Negative factor: True width not determined. Evidence · table > 0.11 Context: 427.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.