EdgarFiling
Original announcement by research on
- Company
- Unavailable
- Ticker
- FURY
- Exchange
- TSX
- Region
- Nunavut
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-11-10 16:12:58 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Fury reported first assay results from its 2026 diamond drill program at the Committee Bay gold project in Nunavut, focused on infill drilling at the Three Bluffs deposit. The headline result was 3.88 g/t gold over 17.82 m true width in hole 26TB158, including 18.78 g/t over 3.30 m, with several other broad gold intercepts also reported. The company says the results will feed into an upcoming mineral resource update.
Reasoning: The release reports multiple gold drill intercepts at Three Bluffs, including a strong 17.82 m interval at 3.88 g/t Au and a 3.30 m sub-interval at 18.78 g/t Au. It is materially positive because the holes are reported in true widths and are intended to support an upcoming resource update, but novelty is moderated by the infill nature of the program.
Positive factors
- First assay results from the 2026 diamond drill program
- true widths are shown in the table
- infill drilling designed to increase drill density and support confidence in geological and grade continuity
Negative factors
- No new resource estimate is reported; upcoming update is pending
- intervals are composites with disclosed cut-off, but the release is focused on infill confirmation rather than discovery
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 17
Classification and evidence
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The table reports a true width column and the text says the significant drill highlights are shown in true widths.
Evidence · text
“Significant drill highlights, shown in true widths”
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: The release names ALS Lab and describes standards, duplicates and blanks.
Evidence · text
“QA/QC programs using internal standard samples, field and lab duplicates and blanks”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The release states the reported results come from infill drilling designed to increase drill density and support improved confidence in geological and grade continuity.
Evidence · text
“The reported results come from infill drilling designed to increase drill density”
Extracted facts
Stored fact records: 17. Some facts used in scoring do not have a stored record.
Drill Results (17)
26TB158Committee Bay · goldGrade: 0.65Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26TB158
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.65
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.82 m
- From
- 214 m
- To
- 215 m
- Intercept Depth
- 214 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB158:214-215
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: This is a short low-grade intercept, but it is supported by true-width reporting and transparent assay methodology.
Positive factors
- True width is stated in the table
- QA/QC and cut-off methodology are disclosed
Negative factors
- Low grade and narrow intercept
- Infill drilling rather than new discovery
Evidence · table
“0.65”
Context: 26TB158 | 214.00 | 215.00 | 1.00 | 0.82 | 0.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.82
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB158Committee Bay · goldGrade: 3.88Grade Unit: g/tIntercept: 21.6 mView all detailsHide details
Identity
- Hole ID
- 26TB158
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 3.88
- Grade Unit
- g/t
- Intercept
- 21.6 m
- True Width
- 17.82 m
- From
- 220 m
- To
- 241.6 m
- Intercept Depth
- 220 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB158:220-241.6
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: This is the headline intercept and combines strong grade with a substantial true width, making it one of the most material results in the release.
Positive factors
- Strong gold grade over a meaningful width
- True width is disclosed
- Part of infill drilling aimed at improving continuity
Negative factors
- Program is resource-focused rather than a new discovery
- Cut-off and internal dilution rules may affect comparability
Evidence · table
“3.88”
Context: 26TB158 | 220.00 | 241.60 | 21.60 | 17.82 | 3.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17.82
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB158Committee Bay · goldGrade: 18.78Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26TB158
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 18.78
- Grade Unit
- g/t
- Intercept
- 4 m
- True Width
- 3.3 m
- From
- 233 m
- To
- 237 m
- Intercept Depth
- 233 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB158:233-237
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: This is a high-grade internal sub-interval within the main intercept and is strongly positive on grade, despite its shorter width.
Positive factors
- Very high-grade sub-interval
- True width is stated
- Supported by QA/QC disclosure
Negative factors
- Short interval relative to the broader intercept
- Infill context tempers novelty
Evidence · table
“18.78”
Context: 26TB158 | Incl. | 233.00 | 237.00 | 4.00 | 3.30 | 18.78
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.3
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB158Committee Bay · goldGrade: 0.41Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26TB158
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.83 m
- From
- 256 m
- To
- 257 m
- Intercept Depth
- 256 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB158:256-257
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: This is a minor low-grade interval within the same hole and has little standalone economic significance.
Positive factors
- True width is disclosed
Negative factors
- Low-grade short intercept
Evidence · table
“0.41”
Context: 26TB158 | 256.00 | 257.00 | 1.00 | 0.83 | 0.41
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.83
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB158Committee Bay · goldGrade: 0.39Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- 26TB158
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 46 m
- True Width
- 38.97 m
- From
- 265 m
- To
- 311 m
- Intercept Depth
- 265 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB158:265-311
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: The interval is broad and supports continuity, but the grade is modest.
Positive factors
- Very broad true-width interval
- Shows mineralized envelope continuity
Negative factors
- Low average grade over the width
Evidence · table
“0.39”
Context: 26TB158 | 265.00 | 311.00 | 46.00 | 38.97 | 0.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 38.97
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB160Committee Bay · goldGrade: 1.13Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- 26TB160
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 1.13
- Grade Unit
- g/t
- Intercept
- 6 m
- True Width
- 3.35 m
- From
- 225 m
- To
- 231 m
- Intercept Depth
- 225 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB160:225-231
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: A small but positive intercept that adds support to the broader mineralized envelope.
Positive factors
- True width disclosed
- Consistent with a mineralized shear zone
Negative factors
- Short and modest-grade interval
Evidence · table
“1.13”
Context: 26TB160 | 225.00 | 231.00 | 6.00 | 3.35 | 1.13
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.35
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB160Committee Bay · goldGrade: 0.92Grade Unit: g/tIntercept: 55 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB160
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 55 m
- True Width
- 31.45 m
- From
- 248 m
- To
- 303 m
- Intercept Depth
- 248 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB160:248-303
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: This is a broad, continuous interval that is positive for resource continuity even though the grade is moderate.
Positive factors
- Wide true-width interval
- Supports continuity across a large volume of rock
Negative factors
- Grade is moderate rather than high
Evidence · table
“0.92”
Context: 26TB160 | 248.00 | 303.00 | 55.00 | 31.45 | 0.92
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.45
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB160Committee Bay · goldGrade: 12.35Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB160
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 12.35
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.18 m
- From
- 301 m
- To
- 303 m
- Intercept Depth
- 301 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB160:301-303
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: A strong high-grade core within the broader 55 m intercept.
Positive factors
- High-grade sub-interval
- True width is stated
Negative factors
- Short interval
Evidence · table
“12.35”
Context: 26TB160 | Incl. | 301.00 | 303.00 | 2.00 | 1.18 | 12.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.18
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB160Committee Bay · goldGrade: 0.99Grade Unit: g/tIntercept: 47 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB160
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 47 m
- True Width
- 28.83 m
- From
- 333 m
- To
- 380 m
- Intercept Depth
- 333 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB160:333-380
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: This is another broad interval with meaningful true width, supportive of continuity.
Positive factors
- Broad true-width mineralized interval
- Adds to continuity within the deposit
Negative factors
- Grade is sub-1 g/t
Evidence · table
“0.99”
Context: 26TB160 | 333.00 | 380.00 | 47.00 | 28.83 | 0.99
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 28.83
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB160Committee Bay · goldGrade: 2.17Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- 26TB160
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 2.17
- Grade Unit
- g/t
- Intercept
- 6 m
- True Width
- 3.65 m
- From
- 341 m
- To
- 347 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB160:341-347
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: This interval is clearly positive, though not as impactful as the broader sections in the same hole.
Positive factors
- Above-cutoff grade in a discrete interval
- True width provided
Negative factors
- Modest width
Evidence · table
“2.17”
Context: 26TB160 | Incl. | 341.00 | 347.00 | 6.00 | 3.65 | 2.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.65
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB160Committee Bay · goldGrade: 3.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26TB160
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 1.85 m
- From
- 354 m
- To
- 357 m
- Intercept Depth
- 354 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB160:354-357
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: A short but solid high-grade sub-interval within the broader mineralized zone.
Positive factors
- High grade above the stated cutoff
Negative factors
- Short intercept
Evidence · table
“3.50”
Context: 26TB160 | and incl. | 354.00 | 357.00 | 3.00 | 1.85 | 3.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.85
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB161Committee Bay · goldGrade: 0.77Grade Unit: g/tIntercept: 178 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB161
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 178 m
- True Width
- 98.6 m
- From
- 230 m
- To
- 408 m
- Intercept Depth
- 230 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB161:230-408
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: The exceptional width makes this a material continuity result despite the moderate average grade.
Positive factors
- Extremely wide true-width interval
- Represents the widest mineralized interval drilled to date
Negative factors
- Grade is modest
- Infill drilling limits novelty
Evidence · table
“0.77”
Context: 26TB161 | 230.00 | 408.00 | 178.00 | 98.60 | 0.77
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 98.6
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB161Committee Bay · goldGrade: 65.6Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB161
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 65.6
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.56 m
- From
- 401 m
- To
- 402 m
- Intercept Depth
- 401 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB161:401-402
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: This is an exceptionally high-grade one-metre interval that stands out even though the width is narrow.
Positive factors
- Bonanza-grade sub-interval
- QA/QC disclosed
Negative factors
- Very narrow interval
Evidence · table
“65.60”
Context: 26TB161 | Incl. | 401.00 | 402.00 | 1.00 | 0.56 | 65.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.56
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB162Committee Bay · goldGrade: 0.67Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- 26TB162
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 32 m
- True Width
- 17.36 m
- From
- 226 m
- To
- 258 m
- Intercept Depth
- 226 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB162:226-258
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: A supportive continuity interval with modest grade and solid width.
Positive factors
- Meaningful true width
- Adds to mineralized envelope continuity
Negative factors
- Moderate grade
Evidence · table
“0.67”
Context: 26TB162 | 226.00 | 258.00 | 32.00 | 17.36 | 0.67
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17.36
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB162Committee Bay · goldGrade: 0.45Grade Unit: g/tIntercept: 38 mView all detailsHide details
Identity
- Hole ID
- 26TB162
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 38 m
- True Width
- 20.98 m
- From
- 272 m
- To
- 310 m
- Intercept Depth
- 272 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB162:272-310
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: This interval is meaningful for continuity because of its width, but the grade is low.
Positive factors
- Over 20 m true width
Negative factors
- Low grade
Evidence · table
“0.45”
Context: 26TB162 | 272.00 | 310.00 | 38.00 | 20.98 | 0.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 20.98
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB163Committee Bay · goldGrade: 0.72Grade Unit: g/tIntercept: 76 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB163
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 0.72
- Grade Unit
- g/t
- Intercept
- 76 m
- True Width
- 36.58 m
- From
- 309 m
- To
- 385 m
- Intercept Depth
- 309 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB163:309-385
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: A broad interval that is useful for continuity and resource confidence, despite moderate grade.
Positive factors
- Broad true-width interval
- Supports resource continuity at depth
Negative factors
- Sub-1 g/t average grade
Evidence · table
“0.72”
Context: 26TB163 | 309.00 | 385.00 | 76.00 | 36.58 | 0.72
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 36.58
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26TB163Committee Bay · goldGrade: 2.65Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26TB163
- Project
- Committee Bay
- Commodity
- gold
- Region
- canada_nu
- Reported Region
- canada_nu
Geometry
- Grade
- 2.65
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 3.31 m
- From
- 313 m
- To
- 320 m
- Intercept Depth
- 313 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- 26TB163:313-320
- Mining Method
- underground
Location
- Location
- Three Bluffs
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Lab
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 2.5 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Reasoning: This sub-interval strengthens the broader hole result with a solid grade over a narrow width.
Positive factors
- Above-cutoff higher-grade sub-interval
- True width disclosed
Negative factors
- Short interval
Evidence · table
“2.65”
Context: 26TB163 | Incl. | 313.00 | 320.00 | 7.00 | 3.31 | 2.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.31
QA/QC Disclosedpositive
Reported assays have a certified laboratory, actual QA/QC methods, or named QP/CP responsibility. Generic CP boilerplate, old-release references, plans and unrelated work are insufficient. Approval of a correction does not verify expressly unverified historical assays; assay accuracy is not guaranteed.
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.