Endurance Reports Additional High-Grade from Expanding Crown Zone 8.01 gpt Gold over 10.5 Metres
Original announcement by tmx on
- Company
- Endurance Gold Corporation
- Ticker
- EDG
- Exchange
- TSX
- Region
- Unavailable
- Primary commodity
- Gold
- Secondary commodities
- Antimony
- Document categories
- Drill results
- Extracted
- 2026-09-19 21:01:19 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Endurance Gold Corporation reported high-grade gold drill results from its Crown Zone at the Reliance Gold Project, including 8.01 gpt gold over 10.5 metres in hole DDH25-116. The drilling successfully extended mineralization along strike and down-dip, and identified a new mineralized footwall zone within ultramafic rocks. The company also disclosed robust QA/QC procedures and provided true width estimates, while noting the presence of antimony in some intercepts.
Reasoning: The drill results from the Crown Zone at the Reliance Gold Project show significant high-grade gold intercepts, with DDH25-116 returning 8.01 gpt gold over 10.5 m. Step-out drilling successfully expanded the known mineralization and identified a new mineralized footwall zone, indicating strong exploration potential. The company also discloses robust QA/QC procedures and provides true width estimates, enhancing confidence in the results. The presence of antimony is noted as a potential factor for processing considerations.
Positive factors
- High-grade gold intercepts, including 8.01 gpt gold over 10.5 m and 15.12 gpt gold over 2.9 m, demonstrate strong mineralization.
- Step-out drilling successfully extended mineralization along strike and down-dip, indicating potential for expansion.
- Discovery of a new mineralized footwall zone within ultramafic rocks opens new exploration targets.
- High QA/QC standards are disclosed, including use of an ISO/IEC 17025 accredited lab, blanks, standards, and pulp duplicates, and QP sign-off.
- True width is estimated at 90-100% of core length, providing good confidence in the reported widths.
Negative factors
- Antimony is present in significant quantities in some intercepts, which could indicate processing complexity or potential penalty elements.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 86
Extracted facts
Stored fact records: 86. Some facts used in scoring do not have a stored record.
Drill Results (86)
DDH25-109Reliance · goldGrade: 6.74Grade Unit: ppmIntercept: 21.8 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 6.74
- Grade Unit
- ppm
- Intercept
- 21.8 m
- True Width
- 20.71 m
- From
- 336 m
- To
- 357.8 m
- Intercept Depth
- 336 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:336-357.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows strong gold mineralization over a good width, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- High-grade gold intercept (6.74 ppm Au) over a significant width (21.8 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.16%), which could indicate processing complexity.
Evidence · table
“6.74”
Context: 21.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 20.71
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · antimonyGrade: 0.16Grade Unit: %Intercept: 21.8 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 21.8 m
- True Width
- 20.71 m
- From
- 336 m
- To
- 357.8 m
- Intercept Depth
- 336 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:336-357.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.16”
Context: 21.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 20.71
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · goldGrade: 10.11Grade Unit: ppmIntercept: 12.4 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 10.11
- Grade Unit
- ppm
- Intercept
- 12.4 m
- True Width
- 11.78 m
- From
- 339.3 m
- To
- 351.7 m
- Intercept Depth
- 339.3 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:339.3-351.7
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a bonanza-grade gold intercept within a broader mineralized zone, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- Very high-grade gold intercept (10.11 ppm Au) over a good width (12.4 m), indicating a bonanza zone.
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.25%), which could indicate processing complexity.
Evidence · table
“10.11”
Context: 12.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.78
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · antimonyGrade: 0.25Grade Unit: %Intercept: 12.4 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 12.4 m
- True Width
- 11.78 m
- From
- 339.3 m
- To
- 351.7 m
- Intercept Depth
- 339.3 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:339.3-351.7
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this high-grade gold intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.25”
Context: 12.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.78
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · goldGrade: 7.89Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 7.89
- Grade Unit
- ppm
- Intercept
- 1 m
- True Width
- 0.95 m
- From
- 380 m
- To
- 381 m
- Intercept Depth
- 380 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:380-381
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept, indicating localized strong mineralization. QA/QC is robust.
Positive factors
- High-grade gold intercept (7.89 ppm Au) over a narrow width (1.0 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“7.89”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.95
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · antimonyGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.95 m
- From
- 380 m
- To
- 381 m
- Intercept Depth
- 380 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:380-381
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this narrow intercept.
Evidence · table
“0.02”
Context: 1.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.95
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · goldGrade: 54.9Grade Unit: ppmIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 54.9
- Grade Unit
- ppm
- Intercept
- 0.8 m
- True Width
- 0.76 m
- From
- 400.7 m
- To
- 401.5 m
- Intercept Depth
- 400.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:400.7-401.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is an exceptional bonanza-grade gold intercept, albeit narrow, indicating very high-grade localized mineralization. QA/QC is robust.
Positive factors
- Exceptional bonanza-grade gold intercept (54.9 ppm Au) over a narrow width (0.8 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“54.90”
Context: 0.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · antimonyGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- True Width
- 0.76 m
- From
- 400.7 m
- To
- 401.5 m
- Intercept Depth
- 400.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:400.7-401.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this narrow, high-grade gold intercept.
Evidence · table
“0.03”
Context: 0.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · goldGrade: 18.9Grade Unit: ppmIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 18.9
- Grade Unit
- ppm
- Intercept
- 0.9 m
- True Width
- 0.86 m
- From
- 534 m
- To
- 534.9 m
- Intercept Depth
- 534 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:534-534.9
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a very high-grade but narrow gold intercept, indicating localized strong mineralization at depth. QA/QC is robust.
Positive factors
- Very high-grade gold intercept (18.9 ppm Au) over a narrow width (0.9 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“18.90”
Context: 0.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-109Reliance · antimonyGrade: 0.16Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-109
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 0.9 m
- True Width
- 0.86 m
- From
- 534 m
- To
- 534.9 m
- Intercept Depth
- 534 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-109:534-534.9
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.16”
Context: 0.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-110Reliance · goldGrade: 2.34Grade Unit: ppmIntercept: 14.1 mView all detailsHide details
Identity
- Hole ID
- DDH25-110
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 2.34
- Grade Unit
- ppm
- Intercept
- 14.1 m
- True Width
- 13.4 m
- From
- 301.5 m
- To
- 315.6 m
- Intercept Depth
- 301.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-110:301.5-315.6
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows strong gold mineralization over a good width, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- Strong gold intercept (2.34 ppm Au) over a good width (14.1 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.07%), which could indicate processing complexity.
Evidence · table
“2.34”
Context: 14.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 13.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-110Reliance · antimonyGrade: 0.07Grade Unit: %Intercept: 14.1 mView all detailsHide details
Identity
- Hole ID
- DDH25-110
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 14.1 m
- True Width
- 13.4 m
- From
- 301.5 m
- To
- 315.6 m
- Intercept Depth
- 301.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-110:301.5-315.6
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.07”
Context: 14.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 13.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-110Reliance · goldGrade: 7.19Grade Unit: ppmIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-110
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 7.19
- Grade Unit
- ppm
- Intercept
- 1.6 m
- True Width
- 1.52 m
- From
- 303.5 m
- To
- 305.1 m
- Intercept Depth
- 303.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-110:303.5-305.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept within a broader mineralized zone. QA/QC is robust.
Positive factors
- High-grade gold intercept (7.19 ppm Au) over a narrow width (1.6 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“7.19”
Context: 1.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-110Reliance · antimonyGrade: 0.02Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-110
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.6 m
- True Width
- 1.52 m
- From
- 303.5 m
- To
- 305.1 m
- Intercept Depth
- 303.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-110:303.5-305.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this narrow, high-grade gold intercept.
Evidence · table
“0.02”
Context: 1.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-110Reliance · goldGrade: 7.06Grade Unit: ppmIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-110
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 7.06
- Grade Unit
- ppm
- Intercept
- 2.5 m
- True Width
- 2.38 m
- From
- 313.1 m
- To
- 315.6 m
- Intercept Depth
- 313.1 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-110:313.1-315.6
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept within a broader mineralized zone. QA/QC is robust.
Positive factors
- High-grade gold intercept (7.06 ppm Au) over a narrow width (2.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“7.06”
Context: 2.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.38
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-110Reliance · antimonyGrade: 0.13Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-110
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.38 m
- From
- 313.1 m
- To
- 315.6 m
- Intercept Depth
- 313.1 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-110:313.1-315.6
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.13”
Context: 2.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.38
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-111Reliance · goldGrade: 2.22Grade Unit: ppmIntercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-111
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 2.22
- Grade Unit
- ppm
- Intercept
- 17.5 m
- True Width
- 16.62 m
- From
- 171 m
- To
- 188.5 m
- Intercept Depth
- 171 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-111:171-188.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows strong gold mineralization over a good width, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- Strong gold intercept (2.22 ppm Au) over a significant width (17.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.18%), which could indicate processing complexity.
Evidence · table
“2.22”
Context: 17.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.62
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-111Reliance · antimonyGrade: 0.18Grade Unit: %Intercept: 17.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-111
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 17.5 m
- True Width
- 16.62 m
- From
- 171 m
- To
- 188.5 m
- Intercept Depth
- 171 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-111:171-188.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.18”
Context: 17.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.62
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-111Reliance · goldGrade: 5.58Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- DDH25-111
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 5.58
- Grade Unit
- ppm
- Intercept
- 3 m
- True Width
- 2.85 m
- From
- 176.5 m
- To
- 179.5 m
- Intercept Depth
- 176.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-111:176.5-179.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept within a broader mineralized zone. QA/QC is robust.
Positive factors
- High-grade gold intercept (5.58 ppm Au) over a narrow width (3.0 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“5.58”
Context: 3.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-111Reliance · antimonyGrade: 0.09Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- DDH25-111
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 3 m
- True Width
- 2.85 m
- From
- 176.5 m
- To
- 179.5 m
- Intercept Depth
- 176.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-111:176.5-179.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this narrow, high-grade gold intercept.
Evidence · table
“0.09”
Context: 3.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-112Reliance · goldGrade: 3.25Grade Unit: ppmIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-112
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 3.25
- Grade Unit
- ppm
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 216 m
- To
- 216.5 m
- Intercept Depth
- 216 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-112:216-216.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a moderate-grade but very narrow gold intercept. QA/QC is robust.
Positive factors
- Moderate-grade gold intercept (3.25 ppm Au) over a very narrow width (0.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“3.25”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-112Reliance · antimonyGrade: 0.01Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-112
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 216 m
- To
- 216.5 m
- Intercept Depth
- 216 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-112:216-216.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this very narrow intercept.
Evidence · table
“0.01”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-112Reliance · goldGrade: 2.4Grade Unit: ppmIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-112
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 2.4
- Grade Unit
- ppm
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 223.2 m
- To
- 223.7 m
- Intercept Depth
- 223.2 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-112:223.2-223.7
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a moderate-grade but very narrow gold intercept. QA/QC is robust.
Positive factors
- Moderate-grade gold intercept (2.40 ppm Au) over a very narrow width (0.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“2.40”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-112Reliance · antimonyGrade: 0.01Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-112
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 223.2 m
- To
- 223.7 m
- Intercept Depth
- 223.2 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-112:223.2-223.7
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this very narrow intercept.
Evidence · table
“0.01”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-112Reliance · goldGrade: 4.12Grade Unit: ppmIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-112
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 4.12
- Grade Unit
- ppm
- Intercept
- 0.9 m
- True Width
- 0.86 m
- From
- 232.4 m
- To
- 233.3 m
- Intercept Depth
- 232.4 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-112:232.4-233.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept. QA/QC is robust.
Positive factors
- High-grade gold intercept (4.12 ppm Au) over a narrow width (0.9 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“4.12”
Context: 0.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-112Reliance · antimonyGrade: 0.01Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-112
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.9 m
- True Width
- 0.86 m
- From
- 232.4 m
- To
- 233.3 m
- Intercept Depth
- 232.4 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-112:232.4-233.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this narrow intercept.
Evidence · table
“0.01”
Context: 0.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · goldGrade: 5.63Grade Unit: ppmIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 5.63
- Grade Unit
- ppm
- Intercept
- 3.3 m
- True Width
- 3.13 m
- From
- 225 m
- To
- 228.3 m
- Intercept Depth
- 225 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:225-228.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade gold intercept with very high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust.
Positive factors
- High-grade gold intercept (5.63 ppm Au) over a narrow width (3.3 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Very high antimony content (5.12%), indicating significant processing complexity or penalty.
Evidence · table
“5.63”
Context: 3.3
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · antimonyGrade: 5.12Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 5.12
- Grade Unit
- %
- Intercept
- 3.3 m
- True Width
- 3.13 m
- From
- 225 m
- To
- 228.3 m
- Intercept Depth
- 225 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:225-228.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows very high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential.
Positive factors
- Very high antimony content (5.12%), indicating significant polymetallic mineralization.
Negative factors
- Very high antimony content can lead to significant processing challenges or penalties.
Evidence · table
“5.12”
Context: 3.3
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · goldGrade: 10.15Grade Unit: ppmIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 10.15
- Grade Unit
- ppm
- Intercept
- 0.8 m
- True Width
- 0.76 m
- From
- 225 m
- To
- 225.8 m
- Intercept Depth
- 225 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:225-225.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a very high-grade gold intercept, albeit narrow, with very high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust.
Positive factors
- Very high-grade gold intercept (10.15 ppm Au) over a narrow width (0.8 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Very high antimony content (1.65%), indicating significant processing complexity or penalty.
Evidence · table
“10.15”
Context: 0.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · antimonyGrade: 1.65Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 1.65
- Grade Unit
- %
- Intercept
- 0.8 m
- True Width
- 0.76 m
- From
- 225 m
- To
- 225.8 m
- Intercept Depth
- 225 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:225-225.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows very high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential.
Positive factors
- Very high antimony content (1.65%), indicating significant polymetallic mineralization.
Negative factors
- Very high antimony content can lead to significant processing challenges or penalties.
Evidence · table
“1.65”
Context: 0.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · goldGrade: 11.21Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 11.21
- Grade Unit
- ppm
- Intercept
- 3 m
- True Width
- 2.85 m
- From
- 253 m
- To
- 256 m
- Intercept Depth
- 253 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:253-256
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a very high-grade gold intercept, albeit narrow, indicating strong localized mineralization. QA/QC is robust.
Positive factors
- Very high-grade gold intercept (11.21 ppm Au) over a narrow width (3.0 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“11.21”
Context: 3.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · antimonyGrade: 0.01Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3 m
- True Width
- 2.85 m
- From
- 253 m
- To
- 256 m
- Intercept Depth
- 253 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:253-256
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this narrow, high-grade gold intercept.
Evidence · table
“0.01”
Context: 3.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · goldGrade: 11.35Grade Unit: ppmIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 11.35
- Grade Unit
- ppm
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 270.8 m
- To
- 271.4 m
- Intercept Depth
- 270.8 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:270.8-271.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a very high-grade but very narrow gold intercept with high antimony content. QA/QC is robust.
Positive factors
- Very high-grade gold intercept (11.35 ppm Au) over a very narrow width (0.6 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- High antimony content (0.65%), indicating potential processing complexity or penalty.
Evidence · table
“11.35”
Context: 0.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · antimonyGrade: 0.65Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.65
- Grade Unit
- %
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 270.8 m
- To
- 271.4 m
- Intercept Depth
- 270.8 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:270.8-271.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential.
Positive factors
- High antimony content (0.65%), indicating polymetallic mineralization.
Negative factors
- High antimony content can lead to processing challenges or penalties.
Evidence · table
“0.65”
Context: 0.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · goldGrade: 3.27Grade Unit: ppmIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 3.27
- Grade Unit
- ppm
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 383.3 m
- To
- 383.8 m
- Intercept Depth
- 383.3 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:383.3-383.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a moderate-grade but very narrow gold intercept with high antimony content. QA/QC is robust.
Positive factors
- Moderate-grade gold intercept (3.27 ppm Au) over a very narrow width (0.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- High antimony content (0.55%), indicating potential processing complexity or penalty.
Evidence · table
“3.27”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-113Reliance · antimonyGrade: 0.55Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-113
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 383.3 m
- To
- 383.8 m
- Intercept Depth
- 383.3 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-113:383.3-383.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential.
Positive factors
- High antimony content (0.55%), indicating polymetallic mineralization.
Negative factors
- High antimony content can lead to processing challenges or penalties.
Evidence · table
“0.55”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-114Reliance · goldGrade: 1.17Grade Unit: ppmIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-114
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 1.17
- Grade Unit
- ppm
- Intercept
- 4.5 m
- True Width
- 4.28 m
- From
- 207.6 m
- To
- 212.1 m
- Intercept Depth
- 207.6 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-114:207.6-212.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a moderate-grade gold intercept with high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust.
Positive factors
- Moderate-grade gold intercept (1.17 ppm Au) over a narrow width (4.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- High antimony content (0.93%), indicating potential processing complexity or penalty.
Evidence · table
“1.17”
Context: 4.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-114Reliance · antimonyGrade: 0.93Grade Unit: %Intercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-114
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.93
- Grade Unit
- %
- Intercept
- 4.5 m
- True Width
- 4.28 m
- From
- 207.6 m
- To
- 212.1 m
- Intercept Depth
- 207.6 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-114:207.6-212.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential.
Positive factors
- High antimony content (0.93%), indicating significant polymetallic mineralization.
Negative factors
- High antimony content can lead to processing challenges or penalties.
Evidence · table
“0.93”
Context: 4.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-114Reliance · goldGrade: 3.47Grade Unit: ppmIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-114
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 3.47
- Grade Unit
- ppm
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 207.6 m
- To
- 208.1 m
- Intercept Depth
- 207.6 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-114:207.6-208.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but very narrow gold intercept with very high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust.
Positive factors
- High-grade gold intercept (3.47 ppm Au) over a very narrow width (0.5 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Very high antimony content (4.42%), indicating significant processing complexity or penalty.
Evidence · table
“3.47”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-114Reliance · antimonyGrade: 4.42Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-114
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 4.42
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.48 m
- From
- 207.6 m
- To
- 208.1 m
- Intercept Depth
- 207.6 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-114:207.6-208.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This intercept shows very high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential.
Positive factors
- Very high antimony content (4.42%), indicating significant polymetallic mineralization.
Negative factors
- Very high antimony content can lead to significant processing challenges or penalties.
Evidence · table
“4.42”
Context: 0.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · goldGrade: 5.46Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 5.46
- Grade Unit
- ppm
- Intercept
- 2.4 m
- True Width
- 2.28 m
- From
- 288.8 m
- To
- 291.2 m
- Intercept Depth
- 288.8 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:288.8-291.2
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- High-grade gold intercept (5.46 ppm Au) over a narrow width (2.4 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.17%), which could indicate processing complexity.
Evidence · table
“5.46”
Context: 2.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · antimonyGrade: 0.17Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 2.4 m
- True Width
- 2.28 m
- From
- 288.8 m
- To
- 291.2 m
- Intercept Depth
- 288.8 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:288.8-291.2
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.17”
Context: 2.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · goldGrade: 8.08Grade Unit: ppmIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 8.08
- Grade Unit
- ppm
- Intercept
- 1.1 m
- True Width
- 1.05 m
- From
- 288.8 m
- To
- 289.9 m
- Intercept Depth
- 288.8 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:288.8-289.9
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but narrow gold intercept, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- High-grade gold intercept (8.08 ppm Au) over a narrow width (1.1 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.34%), which could indicate processing complexity.
Evidence · table
“8.08”
Context: 1.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.05
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · antimonyGrade: 0.34Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 1.1 m
- True Width
- 1.05 m
- From
- 288.8 m
- To
- 289.9 m
- Intercept Depth
- 288.8 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:288.8-289.9
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.34”
Context: 1.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.05
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · goldGrade: 4.76Grade Unit: ppmIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 4.76
- Grade Unit
- ppm
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 352.5 m
- To
- 353.1 m
- Intercept Depth
- 352.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:352.5-353.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade but very narrow gold intercept. QA/QC is robust.
Positive factors
- High-grade gold intercept (4.76 ppm Au) over a very narrow width (0.6 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Evidence · table
“4.76”
Context: 0.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · antimonyGrade: 0.01Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 352.5 m
- To
- 353.1 m
- Intercept Depth
- 352.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:352.5-353.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Trace antimony is present in this very narrow intercept.
Evidence · table
“0.01”
Context: 0.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · goldGrade: 6.6Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 6.6
- Grade Unit
- ppm
- Intercept
- 2.4 m
- True Width
- 2.28 m
- From
- 418.7 m
- To
- 421.1 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:418.7-421.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a high-grade gold intercept from a newly discovered mineralized ultramafic unit, adding significant exploration potential. QA/QC is robust.
Positive factors
- High-grade gold intercept (6.60 ppm Au) over a narrow width (2.4 m) in a new ultramafic footwall zone.
- Discovery of new mineralized ultramafic unit adds exploration potential.
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.08%), which could indicate processing complexity.
Evidence · table
“6.60”
Context: 2.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · antimonyGrade: 0.08Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 2.4 m
- True Width
- 2.28 m
- From
- 418.7 m
- To
- 421.1 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:418.7-421.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this intercept from the new ultramafic unit, which could be a co-product or a penalty element.
Positive factors
- Antimony is present in the newly discovered ultramafic unit, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.08”
Context: 2.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · goldGrade: 9.38Grade Unit: ppmIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 9.38
- Grade Unit
- ppm
- Intercept
- 1.6 m
- True Width
- 1.52 m
- From
- 418.7 m
- To
- 420.3 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:418.7-420.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a very high-grade gold intercept from a newly discovered mineralized ultramafic unit, adding significant exploration potential. QA/QC is robust.
Positive factors
- Very high-grade gold intercept (9.38 ppm Au) over a narrow width (1.6 m) within the new ultramafic footwall zone.
- Discovery of new mineralized ultramafic unit adds exploration potential.
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.08%), which could indicate processing complexity.
Evidence · table
“9.38”
Context: 1.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-115Reliance · antimonyGrade: 0.08Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- DDH25-115
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1.6 m
- True Width
- 1.52 m
- From
- 418.7 m
- To
- 420.3 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-115:418.7-420.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this intercept from the new ultramafic unit, which could be a co-product or a penalty element.
Positive factors
- Antimony is present in the newly discovered ultramafic unit, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.08”
Context: 1.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-116Reliance · goldGrade: 8.01Grade Unit: ppmIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-116
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 8.01
- Grade Unit
- ppm
- Intercept
- 10.5 m
- True Width
- 9.98 m
- From
- 288.7 m
- To
- 299.2 m
- Intercept Depth
- 288.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-116:288.7-299.2
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a significant high-grade gold intercept from a step-out hole, successfully extending mineralization and demonstrating strong potential. QA/QC is robust.
Positive factors
- High-grade gold intercept (8.01 ppm Au) over a significant width (10.5 m), representing a strong result.
- This hole is a 36-m step-out, indicating successful extension of mineralization.
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.07%), which could indicate processing complexity.
Evidence · table
“8.01”
Context: 10.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.98
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-116Reliance · antimonyGrade: 0.07Grade Unit: %Intercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- DDH25-116
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 10.5 m
- True Width
- 9.98 m
- From
- 288.7 m
- To
- 299.2 m
- Intercept Depth
- 288.7 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-116:288.7-299.2
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this significant gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.07”
Context: 10.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.98
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-116Reliance · goldGrade: 12.69Grade Unit: ppmIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-116
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 12.69
- Grade Unit
- ppm
- Intercept
- 1.9 m
- True Width
- 1.81 m
- From
- 289.9 m
- To
- 291.8 m
- Intercept Depth
- 289.9 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-116:289.9-291.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is a very high-grade gold intercept within a broader mineralized zone, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- Very high-grade gold intercept (12.69 ppm Au) over a narrow width (1.9 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.14%), which could indicate processing complexity.
Evidence · table
“12.69”
Context: 1.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-116Reliance · antimonyGrade: 0.14Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-116
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 1.9 m
- True Width
- 1.81 m
- From
- 289.9 m
- To
- 291.8 m
- Intercept Depth
- 289.9 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-116:289.9-291.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.14”
Context: 1.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-116Reliance · goldGrade: 15.12Grade Unit: ppmIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-116
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 15.12
- Grade Unit
- ppm
- Intercept
- 2.9 m
- True Width
- 2.76 m
- From
- 294.5 m
- To
- 297.4 m
- Intercept Depth
- 294.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-116:294.5-297.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: This is an exceptional bonanza-grade gold intercept within a broader mineralized zone, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted.
Positive factors
- Exceptional bonanza-grade gold intercept (15.12 ppm Au) over a narrow width (2.9 m).
- True width estimated at 90-100% of core length, providing good confidence.
- Robust QA/QC procedures disclosed, including accredited lab and QP sign-off.
Negative factors
- Antimony present (0.06%), which could indicate processing complexity.
Evidence · table
“15.12”
Context: 2.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
DDH25-116Reliance · antimonyGrade: 0.06Grade Unit: %Intercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- DDH25-116
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 2.9 m
- True Width
- 2.76 m
- From
- 294.5 m
- To
- 297.4 m
- Intercept Depth
- 294.5 m
Classification
- Sample Type
- drill
- Group ID
- DDH25-116:294.5-297.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- antimony
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element.
Positive factors
- Antimony is present, indicating polymetallic mineralization.
Negative factors
- Antimony can be a penalty element or add processing complexity.
Evidence · table
“0.06”
Context: 2.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
includesReliance · goldGrade: 10.11Grade Unit: ppmIntercept: 12.4 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 10.11
- Grade Unit
- ppm
- Intercept
- 12.4 m
- From
- 339.3 m
- To
- 351.7 m
- Intercept Depth
- 339.3 m
Classification
- Sample Type
- drill
- Group ID
- includes:339.3-351.7
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 10.11 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“10.11”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.25Grade Unit: %Intercept: 12.4 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 12.4 m
- From
- 339.3 m
- To
- 351.7 m
- Intercept Depth
- 339.3 m
Classification
- Sample Type
- drill
- Group ID
- includes:339.3-351.7
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.25 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.25”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 7.19Grade Unit: ppmIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 7.19
- Grade Unit
- ppm
- Intercept
- 1.6 m
- From
- 303.5 m
- To
- 305.1 m
- Intercept Depth
- 303.5 m
Classification
- Sample Type
- drill
- Group ID
- includes:303.5-305.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 7.19 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“7.19”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.02Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 303.5 m
- To
- 305.1 m
- Intercept Depth
- 303.5 m
Classification
- Sample Type
- drill
- Group ID
- includes:303.5-305.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.02 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.02”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
&includesReliance · goldGrade: 7.06Grade Unit: ppmIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- &includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 7.06
- Grade Unit
- ppm
- Intercept
- 2.5 m
- From
- 313.1 m
- To
- 315.6 m
- Intercept Depth
- 313.1 m
Classification
- Sample Type
- drill
- Group ID
- &includes:313.1-315.6
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 7.06 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“7.06”
Context: &includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
&includesReliance · antimonyGrade: 0.13Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- &includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 313.1 m
- To
- 315.6 m
- Intercept Depth
- 313.1 m
Classification
- Sample Type
- drill
- Group ID
- &includes:313.1-315.6
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.13 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.13”
Context: &includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 5.58Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 5.58
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 176.5 m
- To
- 179.5 m
- Intercept Depth
- 176.5 m
Classification
- Sample Type
- drill
- Group ID
- includes:176.5-179.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 5.58 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“5.58”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.09Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 3 m
- From
- 176.5 m
- To
- 179.5 m
- Intercept Depth
- 176.5 m
Classification
- Sample Type
- drill
- Group ID
- includes:176.5-179.5
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.09 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.09”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 10.15Grade Unit: ppmIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 10.15
- Grade Unit
- ppm
- Intercept
- 0.8 m
- From
- 225 m
- To
- 225.8 m
- Intercept Depth
- 225 m
Classification
- Sample Type
- drill
- Group ID
- includes:225-225.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 10.15 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“10.15”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 1.65Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 1.65
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 225 m
- To
- 225.8 m
- Intercept Depth
- 225 m
Classification
- Sample Type
- drill
- Group ID
- includes:225-225.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 1.65 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“1.65”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 11.21Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 11.21
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 253 m
- To
- 256 m
- Intercept Depth
- 253 m
Classification
- Sample Type
- drill
- Group ID
- includes:253-256
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 11.21 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“11.21”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.01Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3 m
- From
- 253 m
- To
- 256 m
- Intercept Depth
- 253 m
Classification
- Sample Type
- drill
- Group ID
- includes:253-256
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.01 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.01”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 11.35Grade Unit: ppmIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 11.35
- Grade Unit
- ppm
- Intercept
- 0.6 m
- From
- 270.8 m
- To
- 271.4 m
- Intercept Depth
- 270.8 m
Classification
- Sample Type
- drill
- Group ID
- includes:270.8-271.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 11.35 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“11.35”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.65Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.65
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 270.8 m
- To
- 271.4 m
- Intercept Depth
- 270.8 m
Classification
- Sample Type
- drill
- Group ID
- includes:270.8-271.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.65 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 3.27Grade Unit: ppmIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 3.27
- Grade Unit
- ppm
- Intercept
- 0.5 m
- From
- 383.3 m
- To
- 383.8 m
- Intercept Depth
- 383.3 m
Classification
- Sample Type
- drill
- Group ID
- includes:383.3-383.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 3.27 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“3.27”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.55Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 383.3 m
- To
- 383.8 m
- Intercept Depth
- 383.3 m
Classification
- Sample Type
- drill
- Group ID
- includes:383.3-383.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.55 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 3.47Grade Unit: ppmIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 3.47
- Grade Unit
- ppm
- Intercept
- 0.5 m
- From
- 207.6 m
- To
- 208.1 m
- Intercept Depth
- 207.6 m
Classification
- Sample Type
- drill
- Group ID
- includes:207.6-208.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 3.47 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“3.47”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 4.42Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 4.42
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 207.6 m
- To
- 208.1 m
- Intercept Depth
- 207.6 m
Classification
- Sample Type
- drill
- Group ID
- includes:207.6-208.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 4.42 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“4.42”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 8.08Grade Unit: ppmIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 8.08
- Grade Unit
- ppm
- Intercept
- 1.1 m
- From
- 288.8 m
- To
- 289.9 m
- Intercept Depth
- 288.8 m
Classification
- Sample Type
- drill
- Group ID
- includes:288.8-289.9
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 8.08 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“8.08”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.34Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 288.8 m
- To
- 289.9 m
- Intercept Depth
- 288.8 m
Classification
- Sample Type
- drill
- Group ID
- includes:288.8-289.9
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.34 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.34”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 4.76Grade Unit: ppmIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 4.76
- Grade Unit
- ppm
- Intercept
- 0.6 m
- From
- 352.5 m
- To
- 353.1 m
- Intercept Depth
- 352.5 m
Classification
- Sample Type
- drill
- Group ID
- includes:352.5-353.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 4.76 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“4.76”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.01Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 352.5 m
- To
- 353.1 m
- Intercept Depth
- 352.5 m
Classification
- Sample Type
- drill
- Group ID
- includes:352.5-353.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.01 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.01”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 6.6Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 6.6
- Grade Unit
- ppm
- Intercept
- 2.4 m
- From
- 418.7 m
- To
- 421.1 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- includes:418.7-421.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 6.6 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“6.60”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.08Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 418.7 m
- To
- 421.1 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- includes:418.7-421.1
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.08 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesReliance · goldGrade: 9.38Grade Unit: ppmIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 9.38
- Grade Unit
- ppm
- Intercept
- 1.6 m
- From
- 418.7 m
- To
- 420.3 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- Includes:418.7-420.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 9.38 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“9.38”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesReliance · antimonyGrade: 0.08Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 418.7 m
- To
- 420.3 m
- Intercept Depth
- 418.7 m
Classification
- Sample Type
- drill
- Group ID
- Includes:418.7-420.3
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.08 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.08”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · goldGrade: 12.69Grade Unit: ppmIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 12.69
- Grade Unit
- ppm
- Intercept
- 1.9 m
- From
- 289.9 m
- To
- 291.8 m
- Intercept Depth
- 289.9 m
Classification
- Sample Type
- drill
- Group ID
- includes:289.9-291.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 12.69 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“12.69”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
includesReliance · antimonyGrade: 0.14Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 289.9 m
- To
- 291.8 m
- Intercept Depth
- 289.9 m
Classification
- Sample Type
- drill
- Group ID
- includes:289.9-291.8
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.14 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.14”
Context: includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
&includesReliance · goldGrade: 15.12Grade Unit: ppmIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- &includes
- Project
- Reliance
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 15.12
- Grade Unit
- ppm
- Intercept
- 2.9 m
- From
- 294.5 m
- To
- 297.4 m
- Intercept Depth
- 294.5 m
Classification
- Sample Type
- drill
- Group ID
- &includes:294.5-297.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 15.12 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“15.12”
Context: &includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
&includesReliance · antimonyGrade: 0.06Grade Unit: %Intercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- &includes
- Project
- Reliance
- Commodity
- antimony
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- EDG
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 2.9 m
- From
- 294.5 m
- To
- 297.4 m
- Intercept Depth
- 294.5 m
Classification
- Sample Type
- drill
- Group ID
- &includes:294.5-297.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-08T00:00:00.000Z
Reasoning: Expanded from assay table: 0.06 % antimony. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for antimony; intercept not scored.
Evidence · table
“0.06”
Context: &includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.