# Endurance Reports Additional High-Grade from Expanding Crown Zone 8.01 gpt Gold over 10.5 Metres Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496 Original source: https://money.tmx.com/en/quote/EDG/news/4618168373334014/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold- Publisher: tmx Original announcement: 2025-09-08T11:01:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Endurance Gold Corporation - Ticker: EDG - Exchange: TSX - Region: Unavailable - Primary commodity: Gold - Secondary commodities: Antimony - Document categories: Drill results - Extracted: 2026-09-19 21:01:19 UTC Narrative sentiment: 0.70 · Bullish ## Minestarters Atlas summary Endurance Gold Corporation reported high-grade gold drill results from its Crown Zone at the Reliance Gold Project, including 8.01 gpt gold over 10.5 metres in hole DDH25-116. The drilling successfully extended mineralization along strike and down-dip, and identified a new mineralized footwall zone within ultramafic rocks. The company also disclosed robust QA/QC procedures and provided true width estimates, while noting the presence of antimony in some intercepts. Reasoning: The drill results from the Crown Zone at the Reliance Gold Project show significant high-grade gold intercepts, with DDH25-116 returning 8.01 gpt gold over 10.5 m. Step-out drilling successfully expanded the known mineralization and identified a new mineralized footwall zone, indicating strong exploration potential. The company also discloses robust QA/QC procedures and provides true width estimates, enhancing confidence in the results. The presence of antimony is noted as a potential factor for processing considerations. - Positive factor: High-grade gold intercepts, including 8.01 gpt gold over 10.5 m and 15.12 gpt gold over 2.9 m, demonstrate strong mineralization. - Positive factor: Step-out drilling successfully extended mineralization along strike and down-dip, indicating potential for expansion. - Positive factor: Discovery of a new mineralized footwall zone within ultramafic rocks opens new exploration targets. - Positive factor: High QA/QC standards are disclosed, including use of an ISO/IEC 17025 accredited lab, blanks, standards, and pulp duplicates, and QP sign-off. - Positive factor: True width is estimated at 90-100% of core length, providing good confidence in the reported widths. - Negative factor: Antimony is present in significant quantities in some intercepts, which could indicate processing complexity or potential penalty elements. Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 86 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 86. Some facts used in scoring do not have a stored record. ## Drill Results (86) ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-0) Reliance · gold #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 6.74 - Grade Unit: ppm - Intercept: 21.8 m - True Width: 20.71 m - From: 336 m - To: 357.8 m - Intercept Depth: 336 m #### Classification - Sample Type: drill - Group ID: DDH25-109:336-357.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows strong gold mineralization over a good width, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: High-grade gold intercept \(6.74 ppm Au\) over a significant width \(21.8 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.16%\), which could indicate processing complexity. Evidence · table > 6.74 Context: 21.8 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 20.71 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-1) Reliance · antimony #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 21.8 m - True Width: 20.71 m - From: 336 m - To: 357.8 m - Intercept Depth: 336 m #### Classification - Sample Type: drill - Group ID: DDH25-109:336-357.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.16 Context: 21.8 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 20.71 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-2) Reliance · gold #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 10.11 - Grade Unit: ppm - Intercept: 12.4 m - True Width: 11.78 m - From: 339.3 m - To: 351.7 m - Intercept Depth: 339.3 m #### Classification - Sample Type: drill - Group ID: DDH25-109:339.3-351.7 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a bonanza-grade gold intercept within a broader mineralized zone, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: Very high-grade gold intercept \(10.11 ppm Au\) over a good width \(12.4 m\), indicating a bonanza zone. - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.25%\), which could indicate processing complexity. Evidence · table > 10.11 Context: 12.4 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 11.78 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-3) Reliance · antimony #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.25 - Grade Unit: % - Intercept: 12.4 m - True Width: 11.78 m - From: 339.3 m - To: 351.7 m - Intercept Depth: 339.3 m #### Classification - Sample Type: drill - Group ID: DDH25-109:339.3-351.7 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this high-grade gold intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.25 Context: 12.4 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 11.78 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-4) Reliance · gold #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 7.89 - Grade Unit: ppm - Intercept: 1 m - True Width: 0.95 m - From: 380 m - To: 381 m - Intercept Depth: 380 m #### Classification - Sample Type: drill - Group ID: DDH25-109:380-381 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept, indicating localized strong mineralization. QA/QC is robust. - Positive factor: High-grade gold intercept \(7.89 ppm Au\) over a narrow width \(1.0 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 7.89 Context: 1.0 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.95 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-5) Reliance · antimony #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1 m - True Width: 0.95 m - From: 380 m - To: 381 m - Intercept Depth: 380 m #### Classification - Sample Type: drill - Group ID: DDH25-109:380-381 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this narrow intercept. Evidence · table > 0.02 Context: 1.0 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.95 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-6) Reliance · gold #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 54.9 - Grade Unit: ppm - Intercept: 0.8 m - True Width: 0.76 m - From: 400.7 m - To: 401.5 m - Intercept Depth: 400.7 m #### Classification - Sample Type: drill - Group ID: DDH25-109:400.7-401.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is an exceptional bonanza-grade gold intercept, albeit narrow, indicating very high-grade localized mineralization. QA/QC is robust. - Positive factor: Exceptional bonanza-grade gold intercept \(54.9 ppm Au\) over a narrow width \(0.8 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 54.90 Context: 0.8 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.76 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-7) Reliance · antimony #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 0.8 m - True Width: 0.76 m - From: 400.7 m - To: 401.5 m - Intercept Depth: 400.7 m #### Classification - Sample Type: drill - Group ID: DDH25-109:400.7-401.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this narrow, high-grade gold intercept. Evidence · table > 0.03 Context: 0.8 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.76 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-8) Reliance · gold #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 18.9 - Grade Unit: ppm - Intercept: 0.9 m - True Width: 0.86 m - From: 534 m - To: 534.9 m - Intercept Depth: 534 m #### Classification - Sample Type: drill - Group ID: DDH25-109:534-534.9 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a very high-grade but narrow gold intercept, indicating localized strong mineralization at depth. QA/QC is robust. - Positive factor: Very high-grade gold intercept \(18.9 ppm Au\) over a narrow width \(0.9 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 18.90 Context: 0.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.86 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-109 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-9) Reliance · antimony #### Identity - Hole ID: DDH25-109 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.86 m - From: 534 m - To: 534.9 m - Intercept Depth: 534 m #### Classification - Sample Type: drill - Group ID: DDH25-109:534-534.9 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.16 Context: 0.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.86 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-10) Reliance · gold #### Identity - Hole ID: DDH25-110 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 2.34 - Grade Unit: ppm - Intercept: 14.1 m - True Width: 13.4 m - From: 301.5 m - To: 315.6 m - Intercept Depth: 301.5 m #### Classification - Sample Type: drill - Group ID: DDH25-110:301.5-315.6 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows strong gold mineralization over a good width, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: Strong gold intercept \(2.34 ppm Au\) over a good width \(14.1 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.07%\), which could indicate processing complexity. Evidence · table > 2.34 Context: 14.1 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 13.4 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-11) Reliance · antimony #### Identity - Hole ID: DDH25-110 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 14.1 m - True Width: 13.4 m - From: 301.5 m - To: 315.6 m - Intercept Depth: 301.5 m #### Classification - Sample Type: drill - Group ID: DDH25-110:301.5-315.6 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.07 Context: 14.1 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 13.4 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-12) Reliance · gold #### Identity - Hole ID: DDH25-110 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 7.19 - Grade Unit: ppm - Intercept: 1.6 m - True Width: 1.52 m - From: 303.5 m - To: 305.1 m - Intercept Depth: 303.5 m #### Classification - Sample Type: drill - Group ID: DDH25-110:303.5-305.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept within a broader mineralized zone. QA/QC is robust. - Positive factor: High-grade gold intercept \(7.19 ppm Au\) over a narrow width \(1.6 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 7.19 Context: 1.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.52 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-13) Reliance · antimony #### Identity - Hole ID: DDH25-110 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.6 m - True Width: 1.52 m - From: 303.5 m - To: 305.1 m - Intercept Depth: 303.5 m #### Classification - Sample Type: drill - Group ID: DDH25-110:303.5-305.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this narrow, high-grade gold intercept. Evidence · table > 0.02 Context: 1.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.52 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-14) Reliance · gold #### Identity - Hole ID: DDH25-110 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 7.06 - Grade Unit: ppm - Intercept: 2.5 m - True Width: 2.38 m - From: 313.1 m - To: 315.6 m - Intercept Depth: 313.1 m #### Classification - Sample Type: drill - Group ID: DDH25-110:313.1-315.6 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept within a broader mineralized zone. QA/QC is robust. - Positive factor: High-grade gold intercept \(7.06 ppm Au\) over a narrow width \(2.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 7.06 Context: 2.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.38 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-110 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-15) Reliance · antimony #### Identity - Hole ID: DDH25-110 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.13 - Grade Unit: % - Intercept: 2.5 m - True Width: 2.38 m - From: 313.1 m - To: 315.6 m - Intercept Depth: 313.1 m #### Classification - Sample Type: drill - Group ID: DDH25-110:313.1-315.6 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.13 Context: 2.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.38 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-111 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-16) Reliance · gold #### Identity - Hole ID: DDH25-111 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 2.22 - Grade Unit: ppm - Intercept: 17.5 m - True Width: 16.62 m - From: 171 m - To: 188.5 m - Intercept Depth: 171 m #### Classification - Sample Type: drill - Group ID: DDH25-111:171-188.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows strong gold mineralization over a good width, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: Strong gold intercept \(2.22 ppm Au\) over a significant width \(17.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.18%\), which could indicate processing complexity. Evidence · table > 2.22 Context: 17.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 16.62 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-111 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-17) Reliance · antimony #### Identity - Hole ID: DDH25-111 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.18 - Grade Unit: % - Intercept: 17.5 m - True Width: 16.62 m - From: 171 m - To: 188.5 m - Intercept Depth: 171 m #### Classification - Sample Type: drill - Group ID: DDH25-111:171-188.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this intercept, which could be a co-product or a penalty element, requiring further metallurgical consideration. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.18 Context: 17.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 16.62 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-111 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-18) Reliance · gold #### Identity - Hole ID: DDH25-111 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 5.58 - Grade Unit: ppm - Intercept: 3 m - True Width: 2.85 m - From: 176.5 m - To: 179.5 m - Intercept Depth: 176.5 m #### Classification - Sample Type: drill - Group ID: DDH25-111:176.5-179.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept within a broader mineralized zone. QA/QC is robust. - Positive factor: High-grade gold intercept \(5.58 ppm Au\) over a narrow width \(3.0 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 5.58 Context: 3.0 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.85 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-111 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-19) Reliance · antimony #### Identity - Hole ID: DDH25-111 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.09 - Grade Unit: % - Intercept: 3 m - True Width: 2.85 m - From: 176.5 m - To: 179.5 m - Intercept Depth: 176.5 m #### Classification - Sample Type: drill - Group ID: DDH25-111:176.5-179.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this narrow, high-grade gold intercept. Evidence · table > 0.09 Context: 3.0 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.85 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-112 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-20) Reliance · gold #### Identity - Hole ID: DDH25-112 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 3.25 - Grade Unit: ppm - Intercept: 0.5 m - True Width: 0.48 m - From: 216 m - To: 216.5 m - Intercept Depth: 216 m #### Classification - Sample Type: drill - Group ID: DDH25-112:216-216.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a moderate-grade but very narrow gold intercept. QA/QC is robust. - Positive factor: Moderate-grade gold intercept \(3.25 ppm Au\) over a very narrow width \(0.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 3.25 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-112 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-21) Reliance · antimony #### Identity - Hole ID: DDH25-112 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.48 m - From: 216 m - To: 216.5 m - Intercept Depth: 216 m #### Classification - Sample Type: drill - Group ID: DDH25-112:216-216.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this very narrow intercept. Evidence · table > 0.01 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-112 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-22) Reliance · gold #### Identity - Hole ID: DDH25-112 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 2.4 - Grade Unit: ppm - Intercept: 0.5 m - True Width: 0.48 m - From: 223.2 m - To: 223.7 m - Intercept Depth: 223.2 m #### Classification - Sample Type: drill - Group ID: DDH25-112:223.2-223.7 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a moderate-grade but very narrow gold intercept. QA/QC is robust. - Positive factor: Moderate-grade gold intercept \(2.40 ppm Au\) over a very narrow width \(0.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 2.40 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-112 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-23) Reliance · antimony #### Identity - Hole ID: DDH25-112 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.48 m - From: 223.2 m - To: 223.7 m - Intercept Depth: 223.2 m #### Classification - Sample Type: drill - Group ID: DDH25-112:223.2-223.7 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this very narrow intercept. Evidence · table > 0.01 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-112 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-24) Reliance · gold #### Identity - Hole ID: DDH25-112 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 4.12 - Grade Unit: ppm - Intercept: 0.9 m - True Width: 0.86 m - From: 232.4 m - To: 233.3 m - Intercept Depth: 232.4 m #### Classification - Sample Type: drill - Group ID: DDH25-112:232.4-233.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept. QA/QC is robust. - Positive factor: High-grade gold intercept \(4.12 ppm Au\) over a narrow width \(0.9 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 4.12 Context: 0.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.86 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-112 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-25) Reliance · antimony #### Identity - Hole ID: DDH25-112 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.86 m - From: 232.4 m - To: 233.3 m - Intercept Depth: 232.4 m #### Classification - Sample Type: drill - Group ID: DDH25-112:232.4-233.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this narrow intercept. Evidence · table > 0.01 Context: 0.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.86 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-26) Reliance · gold #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 5.63 - Grade Unit: ppm - Intercept: 3.3 m - True Width: 3.13 m - From: 225 m - To: 228.3 m - Intercept Depth: 225 m #### Classification - Sample Type: drill - Group ID: DDH25-113:225-228.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade gold intercept with very high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust. - Positive factor: High-grade gold intercept \(5.63 ppm Au\) over a narrow width \(3.3 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Very high antimony content \(5.12%\), indicating significant processing complexity or penalty. Evidence · table > 5.63 Context: 3.3 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.13 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-27) Reliance · antimony #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 5.12 - Grade Unit: % - Intercept: 3.3 m - True Width: 3.13 m - From: 225 m - To: 228.3 m - Intercept Depth: 225 m #### Classification - Sample Type: drill - Group ID: DDH25-113:225-228.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows very high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential. - Positive factor: Very high antimony content \(5.12%\), indicating significant polymetallic mineralization. - Negative factor: Very high antimony content can lead to significant processing challenges or penalties. Evidence · table > 5.12 Context: 3.3 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.13 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-28) Reliance · gold #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 10.15 - Grade Unit: ppm - Intercept: 0.8 m - True Width: 0.76 m - From: 225 m - To: 225.8 m - Intercept Depth: 225 m #### Classification - Sample Type: drill - Group ID: DDH25-113:225-225.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a very high-grade gold intercept, albeit narrow, with very high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust. - Positive factor: Very high-grade gold intercept \(10.15 ppm Au\) over a narrow width \(0.8 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Very high antimony content \(1.65%\), indicating significant processing complexity or penalty. Evidence · table > 10.15 Context: 0.8 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.76 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-29) Reliance · antimony #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 1.65 - Grade Unit: % - Intercept: 0.8 m - True Width: 0.76 m - From: 225 m - To: 225.8 m - Intercept Depth: 225 m #### Classification - Sample Type: drill - Group ID: DDH25-113:225-225.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows very high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential. - Positive factor: Very high antimony content \(1.65%\), indicating significant polymetallic mineralization. - Negative factor: Very high antimony content can lead to significant processing challenges or penalties. Evidence · table > 1.65 Context: 0.8 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.76 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-30) Reliance · gold #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 11.21 - Grade Unit: ppm - Intercept: 3 m - True Width: 2.85 m - From: 253 m - To: 256 m - Intercept Depth: 253 m #### Classification - Sample Type: drill - Group ID: DDH25-113:253-256 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a very high-grade gold intercept, albeit narrow, indicating strong localized mineralization. QA/QC is robust. - Positive factor: Very high-grade gold intercept \(11.21 ppm Au\) over a narrow width \(3.0 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 11.21 Context: 3.0 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.85 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-31) Reliance · antimony #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 3 m - True Width: 2.85 m - From: 253 m - To: 256 m - Intercept Depth: 253 m #### Classification - Sample Type: drill - Group ID: DDH25-113:253-256 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this narrow, high-grade gold intercept. Evidence · table > 0.01 Context: 3.0 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.85 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-32) Reliance · gold #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 11.35 - Grade Unit: ppm - Intercept: 0.6 m - True Width: 0.57 m - From: 270.8 m - To: 271.4 m - Intercept Depth: 270.8 m #### Classification - Sample Type: drill - Group ID: DDH25-113:270.8-271.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a very high-grade but very narrow gold intercept with high antimony content. QA/QC is robust. - Positive factor: Very high-grade gold intercept \(11.35 ppm Au\) over a very narrow width \(0.6 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: High antimony content \(0.65%\), indicating potential processing complexity or penalty. Evidence · table > 11.35 Context: 0.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.57 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-33) Reliance · antimony #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.65 - Grade Unit: % - Intercept: 0.6 m - True Width: 0.57 m - From: 270.8 m - To: 271.4 m - Intercept Depth: 270.8 m #### Classification - Sample Type: drill - Group ID: DDH25-113:270.8-271.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential. - Positive factor: High antimony content \(0.65%\), indicating polymetallic mineralization. - Negative factor: High antimony content can lead to processing challenges or penalties. Evidence · table > 0.65 Context: 0.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.57 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-34) Reliance · gold #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 3.27 - Grade Unit: ppm - Intercept: 0.5 m - True Width: 0.48 m - From: 383.3 m - To: 383.8 m - Intercept Depth: 383.3 m #### Classification - Sample Type: drill - Group ID: DDH25-113:383.3-383.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a moderate-grade but very narrow gold intercept with high antimony content. QA/QC is robust. - Positive factor: Moderate-grade gold intercept \(3.27 ppm Au\) over a very narrow width \(0.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: High antimony content \(0.55%\), indicating potential processing complexity or penalty. Evidence · table > 3.27 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-113 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-35) Reliance · antimony #### Identity - Hole ID: DDH25-113 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.55 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.48 m - From: 383.3 m - To: 383.8 m - Intercept Depth: 383.3 m #### Classification - Sample Type: drill - Group ID: DDH25-113:383.3-383.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential. - Positive factor: High antimony content \(0.55%\), indicating polymetallic mineralization. - Negative factor: High antimony content can lead to processing challenges or penalties. Evidence · table > 0.55 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-114 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-36) Reliance · gold #### Identity - Hole ID: DDH25-114 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 1.17 - Grade Unit: ppm - Intercept: 4.5 m - True Width: 4.28 m - From: 207.6 m - To: 212.1 m - Intercept Depth: 207.6 m #### Classification - Sample Type: drill - Group ID: DDH25-114:207.6-212.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a moderate-grade gold intercept with high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust. - Positive factor: Moderate-grade gold intercept \(1.17 ppm Au\) over a narrow width \(4.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: High antimony content \(0.93%\), indicating potential processing complexity or penalty. Evidence · table > 1.17 Context: 4.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-114 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-37) Reliance · antimony #### Identity - Hole ID: DDH25-114 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.93 - Grade Unit: % - Intercept: 4.5 m - True Width: 4.28 m - From: 207.6 m - To: 212.1 m - Intercept Depth: 207.6 m #### Classification - Sample Type: drill - Group ID: DDH25-114:207.6-212.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential. - Positive factor: High antimony content \(0.93%\), indicating significant polymetallic mineralization. - Negative factor: High antimony content can lead to processing challenges or penalties. Evidence · table > 0.93 Context: 4.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-114 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-38) Reliance · gold #### Identity - Hole ID: DDH25-114 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 3.47 - Grade Unit: ppm - Intercept: 0.5 m - True Width: 0.48 m - From: 207.6 m - To: 208.1 m - Intercept Depth: 207.6 m #### Classification - Sample Type: drill - Group ID: DDH25-114:207.6-208.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but very narrow gold intercept with very high antimony content, which is a significant factor for processing and potential penalties. QA/QC is robust. - Positive factor: High-grade gold intercept \(3.47 ppm Au\) over a very narrow width \(0.5 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Very high antimony content \(4.42%\), indicating significant processing complexity or penalty. Evidence · table > 3.47 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-114 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-39) Reliance · antimony #### Identity - Hole ID: DDH25-114 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 4.42 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.48 m - From: 207.6 m - To: 208.1 m - Intercept Depth: 207.6 m #### Classification - Sample Type: drill - Group ID: DDH25-114:207.6-208.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This intercept shows very high antimony content, which is a significant factor for processing and potential penalties, but also indicates polymetallic potential. - Positive factor: Very high antimony content \(4.42%\), indicating significant polymetallic mineralization. - Negative factor: Very high antimony content can lead to significant processing challenges or penalties. Evidence · table > 4.42 Context: 0.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-40) Reliance · gold #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 5.46 - Grade Unit: ppm - Intercept: 2.4 m - True Width: 2.28 m - From: 288.8 m - To: 291.2 m - Intercept Depth: 288.8 m #### Classification - Sample Type: drill - Group ID: DDH25-115:288.8-291.2 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: High-grade gold intercept \(5.46 ppm Au\) over a narrow width \(2.4 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.17%\), which could indicate processing complexity. Evidence · table > 5.46 Context: 2.4 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-41) Reliance · antimony #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.17 - Grade Unit: % - Intercept: 2.4 m - True Width: 2.28 m - From: 288.8 m - To: 291.2 m - Intercept Depth: 288.8 m #### Classification - Sample Type: drill - Group ID: DDH25-115:288.8-291.2 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.17 Context: 2.4 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-42) Reliance · gold #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 8.08 - Grade Unit: ppm - Intercept: 1.1 m - True Width: 1.05 m - From: 288.8 m - To: 289.9 m - Intercept Depth: 288.8 m #### Classification - Sample Type: drill - Group ID: DDH25-115:288.8-289.9 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but narrow gold intercept, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: High-grade gold intercept \(8.08 ppm Au\) over a narrow width \(1.1 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.34%\), which could indicate processing complexity. Evidence · table > 8.08 Context: 1.1 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.05 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-43) Reliance · antimony #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.34 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.05 m - From: 288.8 m - To: 289.9 m - Intercept Depth: 288.8 m #### Classification - Sample Type: drill - Group ID: DDH25-115:288.8-289.9 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.34 Context: 1.1 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.05 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-44) Reliance · gold #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 4.76 - Grade Unit: ppm - Intercept: 0.6 m - True Width: 0.57 m - From: 352.5 m - To: 353.1 m - Intercept Depth: 352.5 m #### Classification - Sample Type: drill - Group ID: DDH25-115:352.5-353.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade but very narrow gold intercept. QA/QC is robust. - Positive factor: High-grade gold intercept \(4.76 ppm Au\) over a very narrow width \(0.6 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. Evidence · table > 4.76 Context: 0.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.57 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-45) Reliance · antimony #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.6 m - True Width: 0.57 m - From: 352.5 m - To: 353.1 m - Intercept Depth: 352.5 m #### Classification - Sample Type: drill - Group ID: DDH25-115:352.5-353.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Trace antimony is present in this very narrow intercept. Evidence · table > 0.01 Context: 0.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.57 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-46) Reliance · gold #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 6.6 - Grade Unit: ppm - Intercept: 2.4 m - True Width: 2.28 m - From: 418.7 m - To: 421.1 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: DDH25-115:418.7-421.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a high-grade gold intercept from a newly discovered mineralized ultramafic unit, adding significant exploration potential. QA/QC is robust. - Positive factor: High-grade gold intercept \(6.60 ppm Au\) over a narrow width \(2.4 m\) in a new ultramafic footwall zone. - Positive factor: Discovery of new mineralized ultramafic unit adds exploration potential. - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.08%\), which could indicate processing complexity. Evidence · table > 6.60 Context: 2.4 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-47) Reliance · antimony #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 2.4 m - True Width: 2.28 m - From: 418.7 m - To: 421.1 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: DDH25-115:418.7-421.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this intercept from the new ultramafic unit, which could be a co-product or a penalty element. - Positive factor: Antimony is present in the newly discovered ultramafic unit, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.08 Context: 2.4 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.28 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-48) Reliance · gold #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 9.38 - Grade Unit: ppm - Intercept: 1.6 m - True Width: 1.52 m - From: 418.7 m - To: 420.3 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: DDH25-115:418.7-420.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a very high-grade gold intercept from a newly discovered mineralized ultramafic unit, adding significant exploration potential. QA/QC is robust. - Positive factor: Very high-grade gold intercept \(9.38 ppm Au\) over a narrow width \(1.6 m\) within the new ultramafic footwall zone. - Positive factor: Discovery of new mineralized ultramafic unit adds exploration potential. - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.08%\), which could indicate processing complexity. Evidence · table > 9.38 Context: 1.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.52 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-115 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-49) Reliance · antimony #### Identity - Hole ID: DDH25-115 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 1.6 m - True Width: 1.52 m - From: 418.7 m - To: 420.3 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: DDH25-115:418.7-420.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this intercept from the new ultramafic unit, which could be a co-product or a penalty element. - Positive factor: Antimony is present in the newly discovered ultramafic unit, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.08 Context: 1.6 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.52 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-116 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-50) Reliance · gold #### Identity - Hole ID: DDH25-116 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 8.01 - Grade Unit: ppm - Intercept: 10.5 m - True Width: 9.98 m - From: 288.7 m - To: 299.2 m - Intercept Depth: 288.7 m #### Classification - Sample Type: drill - Group ID: DDH25-116:288.7-299.2 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a significant high-grade gold intercept from a step-out hole, successfully extending mineralization and demonstrating strong potential. QA/QC is robust. - Positive factor: High-grade gold intercept \(8.01 ppm Au\) over a significant width \(10.5 m\), representing a strong result. - Positive factor: This hole is a 36-m step-out, indicating successful extension of mineralization. - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.07%\), which could indicate processing complexity. Evidence · table > 8.01 Context: 10.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.98 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-116 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-51) Reliance · antimony #### Identity - Hole ID: DDH25-116 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 10.5 m - True Width: 9.98 m - From: 288.7 m - To: 299.2 m - Intercept Depth: 288.7 m #### Classification - Sample Type: drill - Group ID: DDH25-116:288.7-299.2 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this significant gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.07 Context: 10.5 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.98 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-116 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-52) Reliance · gold #### Identity - Hole ID: DDH25-116 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 12.69 - Grade Unit: ppm - Intercept: 1.9 m - True Width: 1.81 m - From: 289.9 m - To: 291.8 m - Intercept Depth: 289.9 m #### Classification - Sample Type: drill - Group ID: DDH25-116:289.9-291.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is a very high-grade gold intercept within a broader mineralized zone, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: Very high-grade gold intercept \(12.69 ppm Au\) over a narrow width \(1.9 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.14%\), which could indicate processing complexity. Evidence · table > 12.69 Context: 1.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.81 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-116 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-53) Reliance · antimony #### Identity - Hole ID: DDH25-116 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 1.9 m - True Width: 1.81 m - From: 289.9 m - To: 291.8 m - Intercept Depth: 289.9 m #### Classification - Sample Type: drill - Group ID: DDH25-116:289.9-291.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.14 Context: 1.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.81 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-116 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-54) Reliance · gold #### Identity - Hole ID: DDH25-116 - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 15.12 - Grade Unit: ppm - Intercept: 2.9 m - True Width: 2.76 m - From: 294.5 m - To: 297.4 m - Intercept Depth: 294.5 m #### Classification - Sample Type: drill - Group ID: DDH25-116:294.5-297.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: This is an exceptional bonanza-grade gold intercept within a broader mineralized zone, with high confidence due to QA/QC and true width estimation. The presence of antimony is noted. - Positive factor: Exceptional bonanza-grade gold intercept \(15.12 ppm Au\) over a narrow width \(2.9 m\). - Positive factor: True width estimated at 90-100% of core length, providing good confidence. - Positive factor: Robust QA/QC procedures disclosed, including accredited lab and QP sign-off. - Negative factor: Antimony present \(0.06%\), which could indicate processing complexity. Evidence · table > 15.12 Context: 2.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.76 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### DDH25-116 [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-55) Reliance · antimony #### Identity - Hole ID: DDH25-116 - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 2.9 m - True Width: 2.76 m - From: 294.5 m - To: 297.4 m - Intercept Depth: 294.5 m #### Classification - Sample Type: drill - Group ID: DDH25-116:294.5-297.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Deleterious - Deleterious Flag: Yes - Deleterious Elements: antimony #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Antimony is present in this narrow, high-grade gold intercept, which could be a co-product or a penalty element. - Positive factor: Antimony is present, indicating polymetallic mineralization. - Negative factor: Antimony can be a penalty element or add processing complexity. Evidence · table > 0.06 Context: 2.9 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.76 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Deleterious Elements Present** Polarity: negative Definition: A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent. Why it applies: deleterious\_flag is true ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-56) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 10.11 - Grade Unit: ppm - Intercept: 12.4 m - From: 339.3 m - To: 351.7 m - Intercept Depth: 339.3 m #### Classification - Sample Type: drill - Group ID: includes:339.3-351.7 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 10.11 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 10.11 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-57) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.25 - Grade Unit: % - Intercept: 12.4 m - From: 339.3 m - To: 351.7 m - Intercept Depth: 339.3 m #### Classification - Sample Type: drill - Group ID: includes:339.3-351.7 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.25 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.25 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-58) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 7.19 - Grade Unit: ppm - Intercept: 1.6 m - From: 303.5 m - To: 305.1 m - Intercept Depth: 303.5 m #### Classification - Sample Type: drill - Group ID: includes:303.5-305.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 7.19 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 7.19 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-59) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.6 m - From: 303.5 m - To: 305.1 m - Intercept Depth: 303.5 m #### Classification - Sample Type: drill - Group ID: includes:303.5-305.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.02 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.02 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### &includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-60) Reliance · gold #### Identity - Hole ID: &includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 7.06 - Grade Unit: ppm - Intercept: 2.5 m - From: 313.1 m - To: 315.6 m - Intercept Depth: 313.1 m #### Classification - Sample Type: drill - Group ID: &includes:313.1-315.6 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 7.06 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 7.06 Context: &includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### &includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-61) Reliance · antimony #### Identity - Hole ID: &includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.13 - Grade Unit: % - Intercept: 2.5 m - From: 313.1 m - To: 315.6 m - Intercept Depth: 313.1 m #### Classification - Sample Type: drill - Group ID: &includes:313.1-315.6 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.13 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.13 Context: &includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-62) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 5.58 - Grade Unit: ppm - Intercept: 3 m - From: 176.5 m - To: 179.5 m - Intercept Depth: 176.5 m #### Classification - Sample Type: drill - Group ID: includes:176.5-179.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 5.58 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 5.58 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-63) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.09 - Grade Unit: % - Intercept: 3 m - From: 176.5 m - To: 179.5 m - Intercept Depth: 176.5 m #### Classification - Sample Type: drill - Group ID: includes:176.5-179.5 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.09 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.09 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-64) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 10.15 - Grade Unit: ppm - Intercept: 0.8 m - From: 225 m - To: 225.8 m - Intercept Depth: 225 m #### Classification - Sample Type: drill - Group ID: includes:225-225.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 10.15 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 10.15 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-65) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 1.65 - Grade Unit: % - Intercept: 0.8 m - From: 225 m - To: 225.8 m - Intercept Depth: 225 m #### Classification - Sample Type: drill - Group ID: includes:225-225.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 1.65 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 1.65 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-66) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 11.21 - Grade Unit: ppm - Intercept: 3 m - From: 253 m - To: 256 m - Intercept Depth: 253 m #### Classification - Sample Type: drill - Group ID: includes:253-256 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 11.21 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 11.21 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-67) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 3 m - From: 253 m - To: 256 m - Intercept Depth: 253 m #### Classification - Sample Type: drill - Group ID: includes:253-256 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.01 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.01 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-68) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 11.35 - Grade Unit: ppm - Intercept: 0.6 m - From: 270.8 m - To: 271.4 m - Intercept Depth: 270.8 m #### Classification - Sample Type: drill - Group ID: includes:270.8-271.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 11.35 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 11.35 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-69) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.65 - Grade Unit: % - Intercept: 0.6 m - From: 270.8 m - To: 271.4 m - Intercept Depth: 270.8 m #### Classification - Sample Type: drill - Group ID: includes:270.8-271.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.65 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.65 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-70) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 3.27 - Grade Unit: ppm - Intercept: 0.5 m - From: 383.3 m - To: 383.8 m - Intercept Depth: 383.3 m #### Classification - Sample Type: drill - Group ID: includes:383.3-383.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 3.27 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 3.27 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-71) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.55 - Grade Unit: % - Intercept: 0.5 m - From: 383.3 m - To: 383.8 m - Intercept Depth: 383.3 m #### Classification - Sample Type: drill - Group ID: includes:383.3-383.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.55 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.55 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-72) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 3.47 - Grade Unit: ppm - Intercept: 0.5 m - From: 207.6 m - To: 208.1 m - Intercept Depth: 207.6 m #### Classification - Sample Type: drill - Group ID: includes:207.6-208.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 3.47 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 3.47 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-73) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 4.42 - Grade Unit: % - Intercept: 0.5 m - From: 207.6 m - To: 208.1 m - Intercept Depth: 207.6 m #### Classification - Sample Type: drill - Group ID: includes:207.6-208.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 4.42 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 4.42 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-74) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 8.08 - Grade Unit: ppm - Intercept: 1.1 m - From: 288.8 m - To: 289.9 m - Intercept Depth: 288.8 m #### Classification - Sample Type: drill - Group ID: includes:288.8-289.9 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 8.08 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 8.08 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-75) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.34 - Grade Unit: % - Intercept: 1.1 m - From: 288.8 m - To: 289.9 m - Intercept Depth: 288.8 m #### Classification - Sample Type: drill - Group ID: includes:288.8-289.9 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.34 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.34 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-76) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 4.76 - Grade Unit: ppm - Intercept: 0.6 m - From: 352.5 m - To: 353.1 m - Intercept Depth: 352.5 m #### Classification - Sample Type: drill - Group ID: includes:352.5-353.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 4.76 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 4.76 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-77) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.6 m - From: 352.5 m - To: 353.1 m - Intercept Depth: 352.5 m #### Classification - Sample Type: drill - Group ID: includes:352.5-353.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.01 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.01 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-78) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 6.6 - Grade Unit: ppm - Intercept: 2.4 m - From: 418.7 m - To: 421.1 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: includes:418.7-421.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 6.6 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 6.60 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-79) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 2.4 m - From: 418.7 m - To: 421.1 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: includes:418.7-421.1 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.08 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.08 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### Includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-80) Reliance · gold #### Identity - Hole ID: Includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 9.38 - Grade Unit: ppm - Intercept: 1.6 m - From: 418.7 m - To: 420.3 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: Includes:418.7-420.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 9.38 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 9.38 Context: Includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### Includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-81) Reliance · antimony #### Identity - Hole ID: Includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 1.6 m - From: 418.7 m - To: 420.3 m - Intercept Depth: 418.7 m #### Classification - Sample Type: drill - Group ID: Includes:418.7-420.3 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.08 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.08 Context: Includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-82) Reliance · gold #### Identity - Hole ID: includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 12.69 - Grade Unit: ppm - Intercept: 1.9 m - From: 289.9 m - To: 291.8 m - Intercept Depth: 289.9 m #### Classification - Sample Type: drill - Group ID: includes:289.9-291.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 12.69 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 12.69 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-83) Reliance · antimony #### Identity - Hole ID: includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 1.9 m - From: 289.9 m - To: 291.8 m - Intercept Depth: 289.9 m #### Classification - Sample Type: drill - Group ID: includes:289.9-291.8 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.14 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.14 Context: includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### &includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-84) Reliance · gold #### Identity - Hole ID: &includes - Project: Reliance - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 15.12 - Grade Unit: ppm - Intercept: 2.9 m - From: 294.5 m - To: 297.4 m - Intercept Depth: 294.5 m #### Classification - Sample Type: drill - Group ID: &includes:294.5-297.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 15.12 ppm gold, reported in a unit the rubric does not cover \(g/t\). - Negative factor: Grade unit ppm does not match the gold rubric unit g/t; not scored. Evidence · table > 15.12 Context: &includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### &includes [Link to this fact](https://atlas-extractions.minestarters.com/news/endurance-reports-additional-high-grade-from-expanding-crown-zone-8-01-gpt-gold--ee917b79-db69-40a9-bddb-06872924e496#fact-drill-facts-85) Reliance · antimony #### Identity - Hole ID: &includes - Project: Reliance - Commodity: antimony - Region: canada\_bc - Reported Region: canada\_bc - Ticker: EDG #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 2.9 m - From: 294.5 m - To: 297.4 m - Intercept Depth: 294.5 m #### Classification - Sample Type: drill - Group ID: &includes:294.5-297.4 - Mining Method: unknown #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-09-08T00:00:00.000Z Reasoning: Expanded from assay table: 0.06 % antimony. No grade band defined for this commodity, so the score is a placeholder. - Negative factor: No grade rubric for antimony; intercept not scored. Evidence · table > 0.06 Context: &includes #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.