Faraday Copper Intersects Near-Surface Copper Mineralization from Five Drill Holes in the American Eagle Area
Original announcement by tmx on
- Company
- Faraday Copper Corp.
- Ticker
- FDY
- Exchange
- TSX
- Region
- Arizona
- Primary commodity
- Copper
- Secondary commodities
- Silver, Molybdenum, Gold
- Document categories
- Drill results
- Extracted
- 2026-09-12 04:30:05 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Faraday Copper announced initial results from its Phase IV drill program at the Copper Creek Project in Arizona, with five holes intersecting near-surface copper mineralization in the American Eagle area. These results, including 45.25 m at 0.42% copper in FCD-25-134, expand the known extent of mineralization and support the potential for a significant open pit resource. The program also included geotechnical drilling, with three holes reporting no significant intercepts.
Reasoning: Faraday Copper's initial Phase IV drill results from the Copper Creek Project demonstrate significant near-surface copper mineralization, expanding known zones and supporting the potential for an open pit resource. The program also includes geotechnical drilling to support future studies.
Positive factors
- New drill results confirm and expand near-surface copper mineralization in the American Eagle area.
- Intercepts support the potential for a significant open pit mineral resource.
- Detailed QA/QC procedures are disclosed, including certified lab and QP sign-off.
- True widths are provided for most intercepts, enhancing geological understanding.
Negative factors
- Some drill holes were geotechnical-specific and reported no significant intercepts.
- The open pit cutoff grade mentioned in the highlights is not disclosed.
- True widths are noted as approximate due to irregular mineralization shapes.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 164
Classification and evidence
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The drill results table includes a 'True Width (m)' column, indicating that true widths are provided, although the document notes they are approximate.
Evidence · table
“True Width (m)”
Context: Length (m)
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document includes a detailed 'Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance' section, mentioning independent lab analysis, certified reference samples, blanks, and field duplicates.
Evidence · text
“Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance All sampling was conducted under the supervision of the Company's geologists and the chain of custody from Copper Creek to the independent sample preparation facility, ALS Laboratories in Tucson, AZ, was continuously monitored. The samples were taken as ½ core, over 2 m core length. Samples were crushed, pulverized and sample pulps were analyzed using industry standard analytical methods including a 4-Acid ICP-MS multielement package and an ICP-AES method for high-grade copper samples. Copper mineralized samples were also analyzed for acid and cyanide soluble copper. Gold was analyzed on a 30 g aliquot by fire assay with an ICP-AES finish. A certified reference sample was inserted every 20 th sample. Coarse and fine blanks were inserted every 20 th sample. Approximately 5% of the core samples were cut into ¼ core and submitted as field duplicates. On top of internal QA-QC protocol, additional blanks, reference materials and duplicates were inserted by the analytical laboratory according to their procedure. Data verification of the analytical results included a statistical analysis of the standards and blanks that must pass certain parameters for acceptance to ensure accurate and verifiable results.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drill hole FCD-25-134 is described as expanding the known extent of the Winchester breccia, indicating a step-out from previous mineralization.
Evidence · text
“Drill hole FCD-25-134 intersected several mineralized intervals for a combined 177 metres ("m") greater than 0.30% copper, expanding the known extent of the Winchester breccia to within 100 m from surface.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The Phase IV drill program explicitly includes 'infill drilling' as one of its objectives, alongside geotechnical and exploration targets.
Evidence · text
“These holes targeted near-surface copper mineralization in the American Eagle area as well as infill drilling and geotechnical objectives.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document mentions 'above open pit cutoff grade' but does not provide the specific value of this cutoff grade.
Evidence · text
“Five drill holes in the American Eagle area intersected near-surface mineralization above open pit cutoff grade 1”
Extracted facts
Stored fact records: 164. Some facts used in scoring do not have a stored record.
Drill Results (164)
FCD-25-117Copper Creek · copperGrade: 0.21Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 121 m
- To
- 131 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:121-131
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept confirms copper mineralization with a weak grade, contributing to the overall understanding of the deposit.
Positive factors
- Intercept confirms copper mineralization.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.21”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · silverGrade: 1.35Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.35
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 10 m
- From
- 121 m
- To
- 131 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:121-131
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.35”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · molybdenumGrade: 0.0006Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0006
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 121 m
- To
- 131 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:121-131
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0006”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · copperGrade: 0.23Grade Unit: %Intercept: 46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 46 m
- True Width
- 46 m
- From
- 146 m
- To
- 192 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:146-192
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows a good length of weak copper mineralization, contributing to the overall resource potential.
Positive factors
- Intercept confirms copper mineralization.
- Good intercept length.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.23”
Context: 46.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 46
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · silverGrade: 0.88Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 46 m
- True Width
- 46 m
- From
- 146 m
- To
- 192 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:146-192
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.88”
Context: 46.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 46
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 46 m
- True Width
- 46 m
- From
- 146 m
- To
- 192 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:146-192
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0004”
Context: 46.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 46
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · copperGrade: 0.45Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 178 m
- To
- 188 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:178-188
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a moderate length, indicating a higher-grade zone within the broader mineralization.
Positive factors
- Copper grade is strong for a porphyry deposit.
- True width is disclosed.
Evidence · table
“0.45”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · silverGrade: 1.41Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.41
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 10 m
- From
- 178 m
- To
- 188 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:178-188
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.41”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 178 m
- To
- 188 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:178-188
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0004”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · copperGrade: 0.17Grade Unit: %Intercept: 88 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 88 m
- True Width
- 88 m
- From
- 274 m
- To
- 362 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:274-362
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows a long interval of weak copper mineralization, contributing to the overall resource potential.
Positive factors
- Long intercept length.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.17”
Context: 88.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · silverGrade: 0.56Grade Unit: g/tIntercept: 88 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 88 m
- True Width
- 88 m
- From
- 274 m
- To
- 362 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:274-362
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.56”
Context: 88.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · molybdenumGrade: 0.001Grade Unit: %Intercept: 88 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.001
- Grade Unit
- %
- Intercept
- 88 m
- True Width
- 88 m
- From
- 274 m
- To
- 362 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:274-362
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0010”
Context: 88.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · copperGrade: 0.25Grade Unit: %Intercept: 78.9 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 78.9 m
- True Width
- 47 m
- From
- 404 m
- To
- 482.9 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:404-482.9
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows a good length of moderate copper mineralization, contributing to the overall resource potential.
Positive factors
- Intercept confirms copper mineralization.
- Good intercept length.
- True width is disclosed.
Negative factors
- Copper grade is moderate for a porphyry deposit.
Evidence · table
“0.25”
Context: 78.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 47
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · silverGrade: 0.74Grade Unit: g/tIntercept: 78.9 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 78.9 m
- True Width
- 47 m
- From
- 404 m
- To
- 482.9 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:404-482.9
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.74”
Context: 78.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 47
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · molybdenumGrade: 0.0007Grade Unit: %Intercept: 78.9 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0007
- Grade Unit
- %
- Intercept
- 78.9 m
- True Width
- 47 m
- From
- 404 m
- To
- 482.9 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:404-482.9
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0007”
Context: 78.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 47
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · copperGrade: 0.46Grade Unit: %Intercept: 22.52 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 22.52 m
- True Width
- 14 m
- From
- 410 m
- To
- 432.52 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:410-432.52
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a good length, indicating a significant higher-grade zone.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.46”
Context: 22.52
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · silverGrade: 1.39Grade Unit: g/tIntercept: 22.52 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.39
- Grade Unit
- g/t
- Intercept
- 22.52 m
- True Width
- 14 m
- From
- 410 m
- To
- 432.52 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:410-432.52
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.39”
Context: 22.52
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-117Copper Creek · molybdenumGrade: 0.0012Grade Unit: %Intercept: 22.52 mView all detailsHide details
Identity
- Hole ID
- FCD-25-117
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0012
- Grade Unit
- %
- Intercept
- 22.52 m
- True Width
- 14 m
- From
- 410 m
- To
- 432.52 m
- Hole Depth
- 550.35 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-117:410-432.52
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548857
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 10 °
- Dip
- 55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0012”
Context: 22.52
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · copperGrade: 0.15Grade Unit: %Intercept: 14.09 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 14.09 m
- True Width
- 14 m
- From
- 14.13 m
- To
- 28.22 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:14.13-28.22
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept confirms copper mineralization with a weak grade, contributing to the overall understanding of the deposit.
Positive factors
- Intercept confirms copper mineralization.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.15”
Context: 14.09
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · silverGrade: 0.57Grade Unit: g/tIntercept: 14.09 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 14.09 m
- True Width
- 14 m
- From
- 14.13 m
- To
- 28.22 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:14.13-28.22
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.57”
Context: 14.09
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 14.09 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 14.09 m
- True Width
- 14 m
- From
- 14.13 m
- To
- 28.22 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:14.13-28.22
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0004”
Context: 14.09
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · copperGrade: 0.26Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 135 m
- To
- 145 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:135-145
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- True width is disclosed.
Evidence · table
“0.26”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · silverGrade: 1.66Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.66
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 10 m
- From
- 135 m
- To
- 145 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:135-145
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.66”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 135 m
- To
- 145 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:135-145
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0004”
Context: 10.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · copperGrade: 0.25Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 12 m
- True Width
- 12 m
- From
- 243 m
- To
- 255 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:243-255
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- True width is disclosed.
Evidence · table
“0.25”
Context: 12.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · silverGrade: 0.89Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 12 m
- True Width
- 12 m
- From
- 243 m
- To
- 255 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:243-255
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.89”
Context: 12.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · molybdenumGrade: 0.0008Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0008
- Grade Unit
- %
- Intercept
- 12 m
- True Width
- 12 m
- From
- 243 m
- To
- 255 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:243-255
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0008”
Context: 12.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · copperGrade: 0.25Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 271 m
- To
- 295 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:271-295
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization over a good length, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.25”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · silverGrade: 0.86Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 271 m
- To
- 295 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:271-295
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.86”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-119Copper Creek · molybdenumGrade: 0.0005Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-119
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0005
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 271 m
- To
- 295 m
- Hole Depth
- 500.18 m
- Intercept Depth
- 14.13 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-119:271-295
- Mining Method
- open_pit
Location
- Location
- American Eagle W
- Easting
- 548855
- Northing
- 3623291
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1309 m
- Azimuth
- 320 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0005”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · copperGrade: 0.57Grade Unit: %Intercept: 16 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 16 m
- True Width
- 16 m
- From
- 8 m
- To
- 24 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:8-24
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This near-surface intercept shows strong copper mineralization over a good length, indicating potential for open pit development.
Positive factors
- Copper grade is strong for a porphyry deposit.
- True width is disclosed.
- Near-surface intercept.
Evidence · table
“0.57”
Context: 16.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · silverGrade: 1.59Grade Unit: g/tIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.59
- Grade Unit
- g/t
- Intercept
- 16 m
- True Width
- 16 m
- From
- 8 m
- To
- 24 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:8-24
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.59”
Context: 16.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · molybdenumGrade: 0.0009Grade Unit: %Intercept: 16 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0009
- Grade Unit
- %
- Intercept
- 16 m
- True Width
- 16 m
- From
- 8 m
- To
- 24 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:8-24
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0009”
Context: 16.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · copperGrade: 0.29Grade Unit: %Intercept: 73 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 73 m
- True Width
- 73 m
- From
- 139 m
- To
- 212 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:139-212
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization over a long length, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- Long intercept length.
- True width is disclosed.
Evidence · table
“0.29”
Context: 73.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · silverGrade: 0.85Grade Unit: g/tIntercept: 73 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 73 m
- True Width
- 73 m
- From
- 139 m
- To
- 212 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:139-212
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.85”
Context: 73.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · molybdenumGrade: 0.002Grade Unit: %Intercept: 73 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.002
- Grade Unit
- %
- Intercept
- 73 m
- True Width
- 73 m
- From
- 139 m
- To
- 212 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:139-212
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0020”
Context: 73.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · copperGrade: 0.42Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 30 m
- From
- 168 m
- To
- 198 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:168-198
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows strong copper mineralization over a good length, indicating a significant higher-grade zone.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.42”
Context: 30.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · silverGrade: 1.38Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 30 m
- From
- 168 m
- To
- 198 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:168-198
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.38”
Context: 30.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-128Copper Creek · molybdenumGrade: 0.0032Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- FCD-25-128
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0032
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 30 m
- From
- 168 m
- To
- 198 m
- Hole Depth
- 220.4 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-128:168-198
- Mining Method
- open_pit
Location
- Location
- Banjo
- Easting
- 549278
- Northing
- 3623531
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 265 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0032”
Context: 30.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · copperGrade: 0.17Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 20 m
- True Width
- 20 m
- From
- 80 m
- To
- 100 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:80-100
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept confirms copper mineralization with a weak grade, contributing to the overall understanding of the deposit.
Positive factors
- Intercept confirms copper mineralization.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.17”
Context: 20.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 20
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · silverGrade: 0.44Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
- Intercept
- 20 m
- True Width
- 20 m
- From
- 80 m
- To
- 100 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:80-100
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.44”
Context: 20.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 20
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · molybdenumGrade: 0.0007Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0007
- Grade Unit
- %
- Intercept
- 20 m
- True Width
- 20 m
- From
- 80 m
- To
- 100 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:80-100
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0007”
Context: 20.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 20
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · copperGrade: 0.41Grade Unit: %Intercept: 56 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:160-216
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows strong copper mineralization over a long length, indicating significant resource potential.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Long intercept length.
- True width is disclosed.
Evidence · table
“0.41”
Context: 56.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:160-216
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.01”
Context: 56.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · silverGrade: 1.09Grade Unit: g/tIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:160-216
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.09”
Context: 56.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · molybdenumGrade: 0.0002Grade Unit: %Intercept: 56 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0002
- Grade Unit
- %
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:160-216
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0002”
Context: 56.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · copperGrade: 0.64Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:164-188
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows strong copper mineralization over a good length, indicating a significant higher-grade zone.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.64”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:164-188
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.02”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · silverGrade: 1.83Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.83
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:164-188
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.83”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · molybdenumGrade: 0.0002Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0002
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:164-188
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0002”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · copperGrade: 0.16Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 242 m
- To
- 266 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:242-266
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept confirms copper mineralization with a weak grade, contributing to the overall understanding of the deposit.
Positive factors
- Intercept confirms copper mineralization.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.16”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · silverGrade: 0.6Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 242 m
- To
- 266 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:242-266
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.60”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-129Copper Creek · molybdenumGrade: 0.0017Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FCD-25-129
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0017
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 242 m
- To
- 266 m
- Hole Depth
- 416.11 m
- Intercept Depth
- 80 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-129:242-266
- Mining Method
- open_pit
Location
- Location
- Banjo N
- Easting
- 549279
- Northing
- 3623532
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1360 m
- Azimuth
- 300 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0017”
Context: 24.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.3Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 30 m
- From
- 20 m
- To
- 50 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:20-50
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This near-surface intercept shows moderate copper mineralization over a good length, indicating potential for open pit development.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
- Near-surface intercept.
Evidence · table
“0.30”
Context: 30.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 0.64Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 30 m
- From
- 20 m
- To
- 50 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:20-50
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.64”
Context: 30.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 30 m
- From
- 20 m
- To
- 50 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:20-50
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0004”
Context: 30.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.33Grade Unit: %Intercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-142.31
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization over a good length, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.33”
Context: 32.89
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-142.31
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.02”
Context: 32.89
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 0.99Grade Unit: g/tIntercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-142.31
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.99”
Context: 32.89
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0012Grade Unit: %Intercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0012
- Grade Unit
- %
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-142.31
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0012”
Context: 32.89
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.44Grade Unit: %Intercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-127
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows strong copper mineralization over a good length, indicating a significant higher-grade zone.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.44”
Context: 17.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-127
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.02”
Context: 17.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 0.8Grade Unit: g/tIntercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-127
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.80”
Context: 17.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:109.42-127
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0004”
Context: 17.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.33Grade Unit: %Intercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:149.17-218
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization over a long length, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- Long intercept length.
- True width is disclosed.
Evidence · table
“0.33”
Context: 68.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:149.17-218
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.01”
Context: 68.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 1.06Grade Unit: g/tIntercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:149.17-218
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.06”
Context: 68.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0026Grade Unit: %Intercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0026
- Grade Unit
- %
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:149.17-218
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0026”
Context: 68.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.57Grade Unit: %Intercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:184.54-201
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows strong copper mineralization over a good length, indicating a significant higher-grade zone.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Good intercept length.
- True width is disclosed.
Evidence · table
“0.57”
Context: 16.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:184.54-201
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.02”
Context: 16.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 1.48Grade Unit: g/tIntercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:184.54-201
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.48”
Context: 16.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0005Grade Unit: %Intercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0005
- Grade Unit
- %
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:184.54-201
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0005”
Context: 16.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.42Grade Unit: %Intercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:256.28-301.53
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows strong copper mineralization over a long length, indicating significant resource potential.
Positive factors
- Copper grade is strong for a porphyry deposit.
- Long intercept length.
- True width is disclosed.
Evidence · table
“0.42”
Context: 45.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:256.28-301.53
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.02”
Context: 45.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 1.16Grade Unit: g/tIntercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:256.28-301.53
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“1.16”
Context: 45.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0005Grade Unit: %Intercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0005
- Grade Unit
- %
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:256.28-301.53
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0005”
Context: 45.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.27Grade Unit: %Intercept: 43 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:320-363
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization over a long length, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- Long intercept length.
- True width is disclosed.
Evidence · table
“0.27”
Context: 43.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 43 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:320-363
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.01”
Context: 43.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 0.73Grade Unit: g/tIntercept: 43 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:320-363
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.73”
Context: 43.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0011Grade Unit: %Intercept: 43 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0011
- Grade Unit
- %
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:320-363
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0011”
Context: 43.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.2Grade Unit: %Intercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:376-404.95
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept confirms copper mineralization with a weak grade, contributing to the overall understanding of the deposit.
Positive factors
- Intercept confirms copper mineralization.
- True width is disclosed.
Negative factors
- Copper grade is weak for a porphyry deposit.
Evidence · table
“0.20”
Context: 28.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:376-404.95
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.01”
Context: 28.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 0.57Grade Unit: g/tIntercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:376-404.95
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.57”
Context: 28.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0012Grade Unit: %Intercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0012
- Grade Unit
- %
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:376-404.95
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0012”
Context: 28.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · copperGrade: 0.28Grade Unit: %Intercept: 17 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:420-437
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This intercept shows moderate copper mineralization, contributing to the overall resource potential.
Positive factors
- Copper grade is moderate for a porphyry deposit.
- True width is disclosed.
Evidence · table
“0.28”
Context: 17.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:420-437
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The gold grade is very low and unlikely to be economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Gold grade is very low.
Evidence · table
“0.01”
Context: 17.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · silverGrade: 0.67Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:420-437
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This silver intercept is very low grade and unlikely to be economically significant on its own.
Positive factors
- True width is disclosed.
Negative factors
- Silver grade is very low.
Evidence · table
“0.67”
Context: 17.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-134Copper Creek · molybdenumGrade: 0.0006Grade Unit: %Intercept: 17 mView all detailsHide details
Identity
- Hole ID
- FCD-25-134
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0006
- Grade Unit
- %
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Hole Depth
- 437.39 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- FCD-25-134:420-437
- Mining Method
- open_pit
Location
- Location
- American Eagle N
- Easting
- 549044
- Northing
- 3623489
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1308 m
- Azimuth
- 310 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: The molybdenum grade is very low and likely not economically significant.
Positive factors
- True width is disclosed.
Negative factors
- Molybdenum grade is very low.
Evidence · table
“0.0006”
Context: 17.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-118Copper Creek · copperIntercept: 0 mView all detailsHide details
Identity
- Hole ID
- FCD-25-118
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Intercept
- 0 m
- Hole Depth
- 203 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- American Eagle SW
- Easting
- 548704
- Northing
- 3623290
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1304 m
- Azimuth
- 172 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This hole was primarily for geotechnical purposes and did not yield significant mineralization, which is a neutral to slightly negative outcome for resource expansion.
Positive factors
- Hole provided geotechnical data.
Negative factors
- No significant intercepts reported.
Evidence · table
“No significant intercepts geotechnical specific hole”
Context: FCD-25-118
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-120Copper Creek · copperIntercept: 0 mView all detailsHide details
Identity
- Hole ID
- FCD-25-120
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Intercept
- 0 m
- Hole Depth
- 247.07 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- American Eagle SW
- Easting
- 548861
- Northing
- 3623289
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1310 m
- Azimuth
- 203 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This hole was primarily for geotechnical purposes and did not yield significant mineralization, which is a neutral to slightly negative outcome for resource expansion.
Positive factors
- Hole provided geotechnical data.
Negative factors
- No significant intercepts reported.
Evidence · table
“No significant intercepts geotechnical specific hole”
Context: FCD-25-120
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
FCD-25-121Copper Creek · copperIntercept: 0 mView all detailsHide details
Identity
- Hole ID
- FCD-25-121
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Intercept
- 0 m
- Hole Depth
- 300.23 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Prada E
- Easting
- 549163
- Northing
- 3623124
- CRS
- WGS84, UTM Zone 12 North
- EPSG
- 32612
- Elevation
- 1353 m
- Azimuth
- 32 °
- Dip
- 45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: This hole did not yield significant mineralization, which is a negative outcome for resource expansion.
Negative factors
- No significant intercepts reported.
Evidence · table
“No significant intercepts”
Context: FCD-25-121
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
andCopper Creek · copperGrade: 0.23Grade Unit: %Intercept: 46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 46 m
- True Width
- 46 m
- From
- 146 m
- To
- 192 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:146-192
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 10.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 46
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.88Grade Unit: g/tIntercept: 46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 46 m
- True Width
- 46 m
- From
- 146 m
- To
- 192 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:146-192
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.88 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 40.5 g/t·m is below.
Negative factors
- 0.88 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.88”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 46
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 46 m
- True Width
- 46 m
- From
- 146 m
- To
- 192 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:146-192
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0004 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0004”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 46
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.45Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 178 m
- To
- 188 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:178-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.45 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 4.5 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.45 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.45”
Context: including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.41Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.41
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 10 m
- From
- 178 m
- To
- 188 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:178-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.41 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.1 g/t·m is below.
Negative factors
- 1.41 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.41”
Context: including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 178 m
- To
- 188 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:178-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0004 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0004”
Context: including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.17Grade Unit: %Intercept: 88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 88 m
- True Width
- 88 m
- From
- 274 m
- To
- 362 m
- Intercept Depth
- 274 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:274-362
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 15.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.56Grade Unit: g/tIntercept: 88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 88 m
- True Width
- 88 m
- From
- 274 m
- To
- 362 m
- Intercept Depth
- 274 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:274-362
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.56 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 49.3 g/t·m is below.
Negative factors
- 0.56 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.56”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.001Grade Unit: %Intercept: 88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.001
- Grade Unit
- %
- Intercept
- 88 m
- True Width
- 88 m
- From
- 274 m
- To
- 362 m
- Intercept Depth
- 274 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:274-362
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.001 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0010”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.25Grade Unit: %Intercept: 78.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 78.9 m
- True Width
- 47 m
- From
- 404 m
- To
- 482.9 m
- Intercept Depth
- 404 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:404-482.9
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 19.7 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 47
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.74Grade Unit: g/tIntercept: 78.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 78.9 m
- True Width
- 47 m
- From
- 404 m
- To
- 482.9 m
- Intercept Depth
- 404 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:404-482.9
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.74 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 58.4 g/t·m is below.
Negative factors
- 0.74 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.74”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 47
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0007Grade Unit: %Intercept: 78.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0007
- Grade Unit
- %
- Intercept
- 78.9 m
- True Width
- 47 m
- From
- 404 m
- To
- 482.9 m
- Intercept Depth
- 404 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:404-482.9
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0007 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0007”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 47
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.46Grade Unit: %Intercept: 22.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 22.52 m
- True Width
- 14 m
- From
- 410 m
- To
- 432.52 m
- Intercept Depth
- 410 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:410-432.52
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.46 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 10.4 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.46 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.46”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.39Grade Unit: g/tIntercept: 22.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.39
- Grade Unit
- g/t
- Intercept
- 22.52 m
- True Width
- 14 m
- From
- 410 m
- To
- 432.52 m
- Intercept Depth
- 410 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:410-432.52
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.39 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 31.3 g/t·m is below.
Negative factors
- 1.39 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.39”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0012Grade Unit: %Intercept: 22.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0012
- Grade Unit
- %
- Intercept
- 22.52 m
- True Width
- 14 m
- From
- 410 m
- To
- 432.52 m
- Intercept Depth
- 410 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:410-432.52
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0012 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0012”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.26Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 135 m
- To
- 145 m
- Intercept Depth
- 135 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:135-145
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 2.6 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.66Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.66
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 10 m
- From
- 135 m
- To
- 145 m
- Intercept Depth
- 135 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:135-145
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.66 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 16.6 g/t·m is below.
Negative factors
- 1.66 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.66”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 10 m
- From
- 135 m
- To
- 145 m
- Intercept Depth
- 135 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:135-145
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0004 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0004”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.25Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 12 m
- True Width
- 12 m
- From
- 243 m
- To
- 255 m
- Intercept Depth
- 243 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:243-255
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 3.0 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.89Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 12 m
- True Width
- 12 m
- From
- 243 m
- To
- 255 m
- Intercept Depth
- 243 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:243-255
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.89 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 10.7 g/t·m is below.
Negative factors
- 0.89 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.89”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0008Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0008
- Grade Unit
- %
- Intercept
- 12 m
- True Width
- 12 m
- From
- 243 m
- To
- 255 m
- Intercept Depth
- 243 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:243-255
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0008 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0008”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.25Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 271 m
- To
- 295 m
- Intercept Depth
- 271 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:271-295
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 6.0 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.86Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 271 m
- To
- 295 m
- Intercept Depth
- 271 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:271-295
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.86 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 20.6 g/t·m is below.
Negative factors
- 0.86 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.86”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0005Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0005
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 271 m
- To
- 295 m
- Intercept Depth
- 271 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:271-295
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0005 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0005”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.29Grade Unit: %Intercept: 73 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 73 m
- True Width
- 73 m
- From
- 139 m
- To
- 212 m
- Intercept Depth
- 139 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:139-212
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.29 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 21.2 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.29”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.85Grade Unit: g/tIntercept: 73 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 73 m
- True Width
- 73 m
- From
- 139 m
- To
- 212 m
- Intercept Depth
- 139 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:139-212
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.85 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 62.0 g/t·m is below.
Negative factors
- 0.85 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.85”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.002Grade Unit: %Intercept: 73 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.002
- Grade Unit
- %
- Intercept
- 73 m
- True Width
- 73 m
- From
- 139 m
- To
- 212 m
- Intercept Depth
- 139 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:139-212
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.002 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0020”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.42Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 30 m
- From
- 168 m
- To
- 198 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:168-198
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 12.6 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.42 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.38Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 30 m
- From
- 168 m
- To
- 198 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:168-198
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.38 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 41.4 g/t·m is below.
Negative factors
- 1.38 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.38”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0032Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0032
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 30 m
- From
- 168 m
- To
- 198 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:168-198
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0032 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0032”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.41Grade Unit: %Intercept: 56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:160-216
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.41 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 23.0 %·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 0.41 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.41”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:160-216
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.09Grade Unit: g/tIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:160-216
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.09 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 61.0 g/t·m is below.
Negative factors
- 1.09 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.09”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0002Grade Unit: %Intercept: 56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0002
- Grade Unit
- %
- Intercept
- 56 m
- True Width
- 56 m
- From
- 160 m
- To
- 216 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:160-216
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0002 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0002”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.64Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:164-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.64 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 15.4 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.64 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.64”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:164-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.83Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.83
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:164-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.83 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 43.9 g/t·m is below.
Negative factors
- 1.83 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.83”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0002Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0002
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 164 m
- To
- 188 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:164-188
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0002 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0002”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.16Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 242 m
- To
- 266 m
- Intercept Depth
- 242 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:242-266
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 3.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.6Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 24 m
- True Width
- 24 m
- From
- 242 m
- To
- 266 m
- Intercept Depth
- 242 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:242-266
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.4 g/t·m is below.
Negative factors
- 0.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.60”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0017Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0017
- Grade Unit
- %
- Intercept
- 24 m
- True Width
- 24 m
- From
- 242 m
- To
- 266 m
- Intercept Depth
- 242 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:242-266
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0017 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0017”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.33Grade Unit: %Intercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-142.31
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.33 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 10.9 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.33”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-142.31
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.99Grade Unit: g/tIntercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-142.31
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.99 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 32.6 g/t·m is below.
Negative factors
- 0.99 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.99”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0012Grade Unit: %Intercept: 32.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0012
- Grade Unit
- %
- Intercept
- 32.89 m
- True Width
- 32 m
- From
- 109.42 m
- To
- 142.31 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-142.31
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0012 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0012”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.44Grade Unit: %Intercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-127
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.44 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 7.7 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.44 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.44”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-127
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.8Grade Unit: g/tIntercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-127
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.1 g/t·m is below.
Negative factors
- 0.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0004Grade Unit: %Intercept: 17.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0004
- Grade Unit
- %
- Intercept
- 17.58 m
- True Width
- 17 m
- From
- 109.42 m
- To
- 127 m
- Intercept Depth
- 109.42 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:109.42-127
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0004 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0004”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.33Grade Unit: %Intercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Intercept Depth
- 149.17 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:149.17-218
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.33 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 22.7 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.33”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Intercept Depth
- 149.17 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:149.17-218
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.06Grade Unit: g/tIntercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Intercept Depth
- 149.17 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:149.17-218
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.06 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 73.0 g/t·m is below.
Negative factors
- 1.06 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.06”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0026Grade Unit: %Intercept: 68.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0026
- Grade Unit
- %
- Intercept
- 68.83 m
- True Width
- 49 m
- From
- 149.17 m
- To
- 218 m
- Intercept Depth
- 149.17 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:149.17-218
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0026 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0026”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.57Grade Unit: %Intercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Intercept Depth
- 184.54 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:184.54-201
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 9.4 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.57 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Intercept Depth
- 184.54 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:184.54-201
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.48Grade Unit: g/tIntercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Intercept Depth
- 184.54 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:184.54-201
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.48 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 24.4 g/t·m is below.
Negative factors
- 1.48 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.48”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0005Grade Unit: %Intercept: 16.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0005
- Grade Unit
- %
- Intercept
- 16.46 m
- True Width
- 12 m
- From
- 184.54 m
- To
- 201 m
- Intercept Depth
- 184.54 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:184.54-201
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0005 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0005”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.42Grade Unit: %Intercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Intercept Depth
- 256.28 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:256.28-301.53
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 19.0 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.42 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.02Grade Unit: g/tIntercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Intercept Depth
- 256.28 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:256.28-301.53
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 1.16Grade Unit: g/tIntercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Intercept Depth
- 256.28 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:256.28-301.53
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.16 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 52.5 g/t·m is below.
Negative factors
- 1.16 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.16”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0005Grade Unit: %Intercept: 45.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0005
- Grade Unit
- %
- Intercept
- 45.25 m
- True Width
- 45 m
- From
- 256.28 m
- To
- 301.53 m
- Intercept Depth
- 256.28 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:256.28-301.53
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0005 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0005”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.27Grade Unit: %Intercept: 43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Intercept Depth
- 320 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:320-363
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 11.6 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Intercept Depth
- 320 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:320-363
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.73Grade Unit: g/tIntercept: 43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Intercept Depth
- 320 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:320-363
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.73 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 31.4 g/t·m is below.
Negative factors
- 0.73 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.73”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0011Grade Unit: %Intercept: 43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0011
- Grade Unit
- %
- Intercept
- 43 m
- True Width
- 32 m
- From
- 320 m
- To
- 363 m
- Intercept Depth
- 320 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:320-363
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0011 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0011”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · copperGrade: 0.2Grade Unit: %Intercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Intercept Depth
- 376 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:376-404.95
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 5.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.20”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Intercept Depth
- 376 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:376-404.95
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · silverGrade: 0.57Grade Unit: g/tIntercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Intercept Depth
- 376 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:376-404.95
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 16.5 g/t·m is below.
Negative factors
- 0.57 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCopper Creek · molybdenumGrade: 0.0012Grade Unit: %Intercept: 28.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0012
- Grade Unit
- %
- Intercept
- 28.95 m
- True Width
- 21 m
- From
- 376 m
- To
- 404.95 m
- Intercept Depth
- 376 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:376-404.95
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0012 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0012”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndCopper Creek · copperGrade: 0.28Grade Unit: %Intercept: 17 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Copper Creek
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Intercept Depth
- 420 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:420-437
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 4.8 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndCopper Creek · goldGrade: 0.01Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Copper Creek
- Commodity
- gold
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Intercept Depth
- 420 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:420-437
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndCopper Creek · silverGrade: 0.67Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Copper Creek
- Commodity
- silver
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Intercept Depth
- 420 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:420-437
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.67 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 11.4 g/t·m is below.
Negative factors
- 0.67 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.67”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndCopper Creek · molybdenumGrade: 0.0006Grade Unit: %Intercept: 17 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Copper Creek
- Commodity
- molybdenum
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- FDY
Geometry
- Grade
- 0.0006
- Grade Unit
- %
- Intercept
- 17 m
- True Width
- 17 m
- From
- 420 m
- To
- 437 m
- Intercept Depth
- 420 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:420-437
- Mining Method
- open_pit
Location
- CRS
- WGS84, UTM Zone 12 North
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.0006 % molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“0.0006”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.