Fireweed Intersects 30 m True Width of 33.2% Zinc Equivalent in 115 m Step-Out at Tom South
Original announcement by tmx on
- Company
- Fireweed Metals Corp.
- Ticker
- FWZ
- Exchange
- TSX
- Region
- Yukon
- Primary commodity
- Zinc
- Secondary commodities
- Lead, Silver, Gallium, Germanium
- Document categories
- Drill results
- Extracted
- 2026-09-12 05:26:15 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Fireweed Metals reported high-grade drill results from its Macpass Project in Yukon, Canada, highlighted by a 115-meter step-out at Tom South. Hole TS25-001D1 intersected 30 meters true width of 33.23% zinc equivalent, including higher-grade sub-intervals, significantly extending the massive sulfide mineralization which remains open. Infill drilling at Tom West also returned wider and higher-grade intersections than previously modeled.
Reasoning: Hole TS25-001D1 delivered exceptional zinc equivalent grades over significant true widths in a major step-out, indicating substantial resource growth potential at Tom South, which remains open. Infill drilling also exceeded expectations.
Positive factors
- Exceptional zinc equivalent grades (33.23% ZnEq over 30m true width, up to 59.60% ZnEq)
- Significant true widths (30m, 22m, 7m, 3.9m)
- Major 115m step-out extending high-grade mineralization
- Zone remains open down-dip and up-dip, indicating further potential
- Presence of critical minerals (germanium, gallium)
- Infill drilling at Tom West returned wider and higher-grade intersections than predicted
Negative factors
- TS25-001 abandoned due to challenging drilling conditions
- TS25-002 had poor recovery, requiring a twin hole
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 39
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole TS25-001D1 intersected 7.0 m true width of 59.60% ZnEq and 3.9 m true width of 47.33% ZnEq, which are exceptionally high grades for zinc equivalent.
Evidence · text
“7.0 m true width of 59.60% ZnEq”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The release explicitly states estimated true widths for all primary and sub-intervals, such as '30 m true width' for the main intercept in TS25-001D1.
Evidence · text
“30 m true width of 33.23% zinc equivalent”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Hole TS25-001D1 represents a 'major 115 m step-out down-dip at Tom South significantly extending the zone of high-grade massive sulfide mineralization'.
Evidence · text
“A major 115 m step-out down-dip at Tom South significantly extending the zone of high-grade massive sulfide mineralization”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document includes a detailed 'Data Verification' section outlining QA/QC procedures, including certified standards, blanks, duplicates, and analysis by an ISO/IEC 17025:2017 accredited laboratory (Bureau Veritas).
Evidence · text
“The diamond drill core logging and sampling program was carried out under a rigorous quality assurance / quality control program using industry best practices.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: Holes TS25-002 and TS25-002D1 are described as 'successful infill hole[s] within an inferred portion of the Mineral Resource'.
Evidence · text
“doubled as a successful infill hole within an inferred portion of the Mineral Resource”
Extracted facts
Stored fact records: 39. Some facts used in scoring do not have a stored record.
Drill Results (39)
TS25-001D1Macpass · zincGrade: 18.2Grade Unit: %Intercept: 54.82 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 18.2
- Grade Unit
- %
- Intercept
- 54.82 m
- True Width
- 30 m
- From
- 891.6 m
- To
- 946.42 m
- Hole Depth
- 963.1 m
- Intercept Depth
- 891.6 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- TS25-001D1:891.6-946.42
- Mining Method
- underground
Location
- Location
- Tom South
- Easting
- 442371.8
- Northing
- 7003057
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1753.16 m
- Azimuth
- 179.47 °
- Dip
- -89.93 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 33.23
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This primary intercept represents a significant 115m step-out with exceptional zinc equivalent grades and true width, indicating substantial resource expansion potential.
Positive factors
- Exceptional zinc equivalent grade
- Significant true width
- Major step-out
- Zone remains open
Evidence · table
“33.23”
Context: 54.82
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · zincGrade: 19.47Grade Unit: %Intercept: 50.77 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 19.47
- Grade Unit
- %
- Intercept
- 50.77 m
- True Width
- 28 m
- From
- 893.1 m
- To
- 943.87 m
- Hole Depth
- 963.1 m
- Intercept Depth
- 893.1 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- TS25-001D1:893.1-943.87
- Mining Method
- underground
Location
- Location
- Tom South
- Easting
- 442371.8
- Northing
- 7003057
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1753.16 m
- Azimuth
- 179.47 °
- Dip
- -89.93 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 35.49
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This sub-interval shows very high zinc equivalent grades over a substantial true width, contributing to the overall strong intercept.
Positive factors
- Very high zinc equivalent grade
- Significant true width
Evidence · table
“35.49”
Context: 50.77
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · zincGrade: 21.42Grade Unit: %Intercept: 44.62 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 21.42
- Grade Unit
- %
- Intercept
- 44.62 m
- True Width
- 24 m
- From
- 897.98 m
- To
- 942.6 m
- Hole Depth
- 963.1 m
- Intercept Depth
- 897.98 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- TS25-001D1:897.98-942.6
- Mining Method
- underground
Location
- Location
- Tom South
- Easting
- 442371.8
- Northing
- 7003057
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1753.16 m
- Azimuth
- 179.47 °
- Dip
- -89.93 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 39.27
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This sub-interval further highlights the exceptional grades and widths within the main intercept.
Positive factors
- Exceptional zinc equivalent grade
- Significant true width
Evidence · table
“39.27”
Context: 44.62
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · zincGrade: 22.45Grade Unit: %Intercept: 40.43 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 22.45
- Grade Unit
- %
- Intercept
- 40.43 m
- True Width
- 22 m
- From
- 902.17 m
- To
- 942.6 m
- Hole Depth
- 963.1 m
- Intercept Depth
- 902.17 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- TS25-001D1:902.17-942.6
- Mining Method
- underground
Location
- Location
- Tom South
- Easting
- 442371.8
- Northing
- 7003057
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1753.16 m
- Azimuth
- 179.47 °
- Dip
- -89.93 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 41.69
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade zinc equivalent over a substantial true width, indicating a very high-grade core.
Positive factors
- Bonanza zinc equivalent grade
- Significant true width
Evidence · table
“41.69”
Context: 40.43
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · zincGrade: 24.98Grade Unit: %Intercept: 12.83 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 24.98
- Grade Unit
- %
- Intercept
- 12.83 m
- True Width
- 7 m
- From
- 902.17 m
- To
- 915 m
- Hole Depth
- 963.1 m
- Intercept Depth
- 902.17 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- TS25-001D1:902.17-915
- Mining Method
- underground
Location
- Location
- Tom South
- Easting
- 442371.8
- Northing
- 7003057
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1753.16 m
- Azimuth
- 179.47 °
- Dip
- -89.93 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 59.6
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This very high-grade sub-interval represents a bonanza-grade core within the broader intercept, significantly boosting overall value.
Positive factors
- Exceptional bonanza zinc equivalent grade
- High-grade core
Evidence · table
“59.60”
Context: 12.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · zincGrade: 32.82Grade Unit: %Intercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 32.82
- Grade Unit
- %
- Intercept
- 7.1 m
- True Width
- 3.9 m
- From
- 931.5 m
- To
- 938.6 m
- Hole Depth
- 963.1 m
- Intercept Depth
- 931.5 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- TS25-001D1:931.5-938.6
- Mining Method
- underground
Location
- Location
- Tom South
- Easting
- 442371.8
- Northing
- 7003057
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1753.16 m
- Azimuth
- 179.47 °
- Dip
- -89.93 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 47.33
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Another bonanza-grade sub-interval further demonstrates the high-grade nature of the mineralization.
Positive factors
- Exceptional bonanza zinc equivalent grade
- High-grade core
Evidence · table
“47.33”
Context: 7.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · zincGrade: 5.24Grade Unit: %Intercept: 84.69 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 5.24
- Grade Unit
- %
- Intercept
- 84.69 m
- True Width
- 80 m
- From
- 244.85 m
- To
- 329.54 m
- Hole Depth
- 800.05 m
- Intercept Depth
- 244.85 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002:244.85-329.54
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.45
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This wide infill intercept at Tom West exceeded geological model predictions, confirming and improving resource confidence.
Positive factors
- Wide intercept
- Good true width
- Infill drilling exceeded model
Negative factors
- Poor recovery in parent hole
Evidence · table
“5.45”
Context: 84.69
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 80
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-002Macpass · zincGrade: 6.3Grade Unit: %Intercept: 64.25 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 6.3
- Grade Unit
- %
- Intercept
- 64.25 m
- True Width
- 61 m
- From
- 250.54 m
- To
- 314.79 m
- Hole Depth
- 800.05 m
- Intercept Depth
- 250.54 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002:250.54-314.79
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.46
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This sub-interval confirms good grades and widths within the infill zone.
Positive factors
- Wide intercept
- Good true width
Evidence · table
“6.46”
Context: 64.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 61
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-002Macpass · zincGrade: 8.86Grade Unit: %Intercept: 14.43 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 8.86
- Grade Unit
- %
- Intercept
- 14.43 m
- True Width
- 14 m
- From
- 300.36 m
- To
- 314.79 m
- Hole Depth
- 800.05 m
- Intercept Depth
- 300.36 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002:300.36-314.79
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.06
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This higher-grade sub-interval within the infill hole further improves confidence in the resource model.
Positive factors
- Higher-grade sub-interval
- Good true width
Evidence · table
“9.06”
Context: 14.43
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-002D1Macpass · zincGrade: 5.55Grade Unit: %Intercept: 87.5 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 5.55
- Grade Unit
- %
- Intercept
- 87.5 m
- True Width
- 83 m
- From
- 246 m
- To
- 333.5 m
- Hole Depth
- 340 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002D1:246-333.5
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This twin hole confirmed and improved upon the infill intercept with better recovery, exceeding geological model predictions and boosting resource confidence.
Positive factors
- Wide intercept
- Good true width
- Improved recovery
- Infill drilling exceeded model
Evidence · table
“5.75”
Context: 87.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 83
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-002D1Macpass · zincGrade: 7.02Grade Unit: %Intercept: 64 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 7.02
- Grade Unit
- %
- Intercept
- 64 m
- True Width
- 60 m
- From
- 251.5 m
- To
- 315.5 m
- Hole Depth
- 340 m
- Intercept Depth
- 251.5 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002D1:251.5-315.5
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.22
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This sub-interval confirms good grades and widths within the infill zone with improved recovery.
Positive factors
- Wide intercept
- Good true width
Evidence · table
“7.22”
Context: 64.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 60
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-002D1Macpass · zincGrade: 8.8Grade Unit: %Intercept: 8.87 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 8.8
- Grade Unit
- %
- Intercept
- 8.87 m
- True Width
- 8.4 m
- From
- 272.13 m
- To
- 281 m
- Hole Depth
- 340 m
- Intercept Depth
- 272.13 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002D1:272.13-281
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.01
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This higher-grade sub-interval within the infill hole further improves confidence in the resource model with better recovery.
Positive factors
- Higher-grade sub-interval
- Good true width
Evidence · table
“9.01”
Context: 8.87
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-002D1Macpass · zincGrade: 8.85Grade Unit: %Intercept: 19.5 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 8.85
- Grade Unit
- %
- Intercept
- 19.5 m
- True Width
- 18 m
- From
- 294.5 m
- To
- 314 m
- Hole Depth
- 340 m
- Intercept Depth
- 294.5 m
Classification
- Deposit Type
- sedex
- Program
- resource
- Sample Type
- drill
- Group ID
- TS25-002D1:294.5-314
- Mining Method
- underground
Location
- Location
- Tom West
- Easting
- 441812.16
- Northing
- 7003717.89
- CRS
- NAD83 UTM Zone 9N
- Elevation
- 1536.01 m
- Azimuth
- 47.71 °
- Dip
- -68.81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.1
- Metal Eq. Unit
- % ZnEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: This higher-grade sub-interval within the infill hole further improves confidence in the resource model with better recovery.
Positive factors
- Higher-grade sub-interval
- Good true width
Evidence · table
“9.10”
Context: 19.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TS25-001D1Macpass · leadGrade: 13.93Grade Unit: %Intercept: 54.82 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 13.93
- Grade Unit
- %
- Intercept
- 54.82 m
- True Width
- 30 m
- From
- 891.6 m
- To
- 946.42 m
- Intercept Depth
- 891.6 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:891.6-946.42
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 33.23
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 13.93 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 763.6 %·m is exceptional.
Positive factors
- 13.93 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.93”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · silverGrade: 161Grade Unit: g/tIntercept: 54.82 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 161
- Grade Unit
- g/t
- Intercept
- 54.82 m
- True Width
- 30 m
- From
- 891.6 m
- To
- 946.42 m
- Intercept Depth
- 891.6 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:891.6-946.42
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 33.23
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 161 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 8826.0 g/t·m is exceptional (grade alone is moderate; the better of the two is used).
Positive factors
- 161 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“161.0”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · leadGrade: 14.88Grade Unit: %Intercept: 50.77 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 14.88
- Grade Unit
- %
- Intercept
- 50.77 m
- True Width
- 28 m
- From
- 893.1 m
- To
- 943.87 m
- Intercept Depth
- 893.1 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:893.1-943.87
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 35.49
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 14.88 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 755.5 %·m is exceptional.
Positive factors
- 14.88 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.88”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · silverGrade: 170.9Grade Unit: g/tIntercept: 50.77 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 170.9
- Grade Unit
- g/t
- Intercept
- 50.77 m
- True Width
- 28 m
- From
- 893.1 m
- To
- 943.87 m
- Intercept Depth
- 893.1 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:893.1-943.87
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 35.49
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 170.9 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 8676.6 g/t·m is exceptional (grade alone is moderate; the better of the two is used).
Positive factors
- 170.9 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“170.9”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · leadGrade: 16.54Grade Unit: %Intercept: 44.62 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 16.54
- Grade Unit
- %
- Intercept
- 44.62 m
- True Width
- 24 m
- From
- 897.98 m
- To
- 942.6 m
- Intercept Depth
- 897.98 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:897.98-942.6
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 39.27
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 16.54 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 738.0 %·m is exceptional.
Positive factors
- 16.54 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.54”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · silverGrade: 191.4Grade Unit: g/tIntercept: 44.62 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 191.4
- Grade Unit
- g/t
- Intercept
- 44.62 m
- True Width
- 24 m
- From
- 897.98 m
- To
- 942.6 m
- Intercept Depth
- 897.98 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:897.98-942.6
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 39.27
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 191.4 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 8540.3 g/t·m is exceptional (grade alone is moderate; the better of the two is used).
Positive factors
- 191.4 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“191.4”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · leadGrade: 17.76Grade Unit: %Intercept: 40.43 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 17.76
- Grade Unit
- %
- Intercept
- 40.43 m
- True Width
- 22 m
- From
- 902.17 m
- To
- 942.6 m
- Intercept Depth
- 902.17 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:902.17-942.6
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 41.69
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 17.76 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 718.0 %·m is exceptional.
Positive factors
- 17.76 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“17.76”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · silverGrade: 208.2Grade Unit: g/tIntercept: 40.43 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 208.2
- Grade Unit
- g/t
- Intercept
- 40.43 m
- True Width
- 22 m
- From
- 902.17 m
- To
- 942.6 m
- Intercept Depth
- 902.17 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:902.17-942.6
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 41.69
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 208.2 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 8417.5 g/t·m is exceptional (grade alone is strong; the better of the two is used).
Positive factors
- 208.2 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“208.2”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · leadGrade: 32.09Grade Unit: %Intercept: 12.83 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 32.09
- Grade Unit
- %
- Intercept
- 12.83 m
- True Width
- 7 m
- From
- 902.17 m
- To
- 915 m
- Intercept Depth
- 902.17 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:902.17-915
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 59.6
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 32.09 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 411.7 %·m is exceptional.
Positive factors
- 32.09 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“32.09”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · silverGrade: 371.4Grade Unit: g/tIntercept: 12.83 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 371.4
- Grade Unit
- g/t
- Intercept
- 12.83 m
- True Width
- 7 m
- From
- 902.17 m
- To
- 915 m
- Intercept Depth
- 902.17 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:902.17-915
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 59.6
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 371.4 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 4765.1 g/t·m is strong.
Positive factors
- 371.4 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“371.4”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · leadGrade: 14.28Grade Unit: %Intercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 14.28
- Grade Unit
- %
- Intercept
- 7.1 m
- True Width
- 3.9 m
- From
- 931.5 m
- To
- 938.6 m
- Intercept Depth
- 931.5 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:931.5-938.6
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 47.33
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 14.28 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 101.4 %·m is strong (grade alone is exceptional; the better of the two is used).
Positive factors
- 14.28 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.28”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-001D1Macpass · silverGrade: 131.1Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- TS25-001D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 131.1
- Grade Unit
- g/t
- Intercept
- 7.1 m
- True Width
- 3.9 m
- From
- 931.5 m
- To
- 938.6 m
- Intercept Depth
- 931.5 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-001D1:931.5-938.6
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 47.33
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 131.1 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 930.8 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“131.1”
Context: TS25-001D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · leadGrade: 0.23Grade Unit: %Intercept: 84.69 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 84.69 m
- True Width
- 80 m
- From
- 244.85 m
- To
- 329.54 m
- Intercept Depth
- 244.85 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002:244.85-329.54
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.45
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 19.5 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: TS25-002
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 80
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · silverGrade: 1.2Grade Unit: g/tIntercept: 84.69 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 84.69 m
- True Width
- 80 m
- From
- 244.85 m
- To
- 329.54 m
- Intercept Depth
- 244.85 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002:244.85-329.54
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.45
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 101.6 g/t·m is below.
Negative factors
- 1.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.2”
Context: TS25-002
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 80
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · leadGrade: 0.17Grade Unit: %Intercept: 64.25 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 64.25 m
- True Width
- 61 m
- From
- 250.54 m
- To
- 314.79 m
- Intercept Depth
- 250.54 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002:250.54-314.79
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.46
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 10.9 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: TS25-002
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 61
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · silverGrade: 1Grade Unit: g/tIntercept: 64.25 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 64.25 m
- True Width
- 61 m
- From
- 250.54 m
- To
- 314.79 m
- Intercept Depth
- 250.54 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002:250.54-314.79
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.46
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 64.3 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.0”
Context: TS25-002
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 61
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · leadGrade: 0.23Grade Unit: %Intercept: 14.43 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 14.43 m
- True Width
- 14 m
- From
- 300.36 m
- To
- 314.79 m
- Intercept Depth
- 300.36 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002:300.36-314.79
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.06
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 3.3 %·m is below.
Negative factors
- 0.23 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: TS25-002
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002Macpass · silverGrade: 0.9Grade Unit: g/tIntercept: 14.43 mView all detailsHide details
Identity
- Hole ID
- TS25-002
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 14.43 m
- True Width
- 14 m
- From
- 300.36 m
- To
- 314.79 m
- Intercept Depth
- 300.36 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002:300.36-314.79
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.06
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 13.0 g/t·m is below.
Negative factors
- 0.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.9”
Context: TS25-002
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · leadGrade: 0.21Grade Unit: %Intercept: 87.5 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 87.5 m
- True Width
- 83 m
- From
- 246 m
- To
- 333.5 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:246-333.5
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 18.4 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 83
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · silverGrade: 1.6Grade Unit: g/tIntercept: 87.5 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 87.5 m
- True Width
- 83 m
- From
- 246 m
- To
- 333.5 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:246-333.5
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 140.0 g/t·m is below.
Negative factors
- 1.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.6”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 83
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · leadGrade: 0.21Grade Unit: %Intercept: 64 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 64 m
- True Width
- 60 m
- From
- 251.5 m
- To
- 315.5 m
- Intercept Depth
- 251.5 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:251.5-315.5
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.22
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 13.4 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 60
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · silverGrade: 1.5Grade Unit: g/tIntercept: 64 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 64 m
- True Width
- 60 m
- From
- 251.5 m
- To
- 315.5 m
- Intercept Depth
- 251.5 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:251.5-315.5
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.22
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 96.0 g/t·m is below.
Negative factors
- 1.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.5”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 60
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · leadGrade: 0.23Grade Unit: %Intercept: 8.87 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 8.87 m
- True Width
- 8.4 m
- From
- 272.13 m
- To
- 281 m
- Intercept Depth
- 272.13 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:272.13-281
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.01
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 2.0 %·m is below.
Negative factors
- 0.23 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · silverGrade: 1.3Grade Unit: g/tIntercept: 8.87 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 8.87 m
- True Width
- 8.4 m
- From
- 272.13 m
- To
- 281 m
- Intercept Depth
- 272.13 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:272.13-281
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.01
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 11.5 g/t·m is below.
Negative factors
- 1.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.3”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · leadGrade: 0.27Grade Unit: %Intercept: 19.5 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 19.5 m
- True Width
- 18 m
- From
- 294.5 m
- To
- 314 m
- Intercept Depth
- 294.5 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:294.5-314
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.1
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 5.3 %·m is below.
Negative factors
- 0.27 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TS25-002D1Macpass · silverGrade: 1.8Grade Unit: g/tIntercept: 19.5 mView all detailsHide details
Identity
- Hole ID
- TS25-002D1
- Project
- Macpass
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- FWZ
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 19.5 m
- True Width
- 18 m
- From
- 294.5 m
- To
- 314 m
- Intercept Depth
- 294.5 m
Classification
- Deposit Type
- sedex
- Sample Type
- drill
- Group ID
- TS25-002D1:294.5-314
- Mining Method
- underground
Location
- Location
- South Zone
- CRS
- NAD83 UTM Zone 9N
- Loc. Source
- document
QA/QC
- Laboratory
- Bureau Veritas (BV)
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 9.1
- Metal Eq. Unit
- % Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 35.1 g/t·m is below.
Negative factors
- 1.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.8”
Context: TS25-002D1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 18
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.