Freegold Drills 1.43 g/t Au over 74.9 m at Golden Summit as 50,000 m 2026 Drill Program Accelerates Towards PFS
Original announcement by tmx on
- Company
- Freegold Ventures Limited
- Ticker
- FVL
- Exchange
- TSX
- Region
- Alaska
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-12 03:38:28 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Freegold Ventures has announced new drill results from its Golden Summit Project in Alaska, reporting several high-grade gold intercepts, including 1.43 g/t Au over 74.9 m and 23.38 g/t Au over 1.9 m in hole GS2548. The 50,000-meter 2026 drill program, utilizing six rigs, is focused on infill, condemnation, and geotechnical drilling to support an upcoming Pre-Feasibility Study (PFS). These results extend and confirm mineralization continuity across the Dolphin–Cleary–WOW trend and highlight expansion potential, though true widths remain undetermined.
Reasoning: The drill results show strong gold grades over significant widths, including bonanza intercepts, which are positive for the project's economics. The program is explicitly designed to support a PFS, indicating advancement towards development. However, the lack of true width determination introduces uncertainty regarding the actual geometry of mineralization.
Positive factors
- High-grade gold intercepts, including bonanza grades, demonstrate strong mineralization.
- Drill program is advancing towards a Pre-Feasibility Study (PFS), de-risking the project.
- Results confirm and extend mineralization continuity across key zones (Dolphin–Cleary–WOW).
- Infill drilling is strengthening confidence in grade continuity for resource modeling.
- Step-out drilling is showing expansion potential, particularly in the Tamarack area.
Negative factors
- True width of intercepts cannot be determined, potentially overstating actual thickness.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 31
Classification and evidence
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'The interval width refers to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.'
Evidence · table
“*The interval width refers to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization. This also applies to the following drilling results tables.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS facilities for analysis and details the QA/QC program including laboratory and field standards and blanks.
Evidence · text
“Core samples were delivered to ALS's facility in Vancouver, Canada, where each sample was crushed to 70% passing a 2 mm (Tyler 9 mesh, U.S. Std. No. 10) screen. In Thunder Bay, a representative ~500 g subsample was obtained by riffle splitting (SPL-32a) and analyzed for gold using ALS method Au-PA01 (PhotonAssay), which provides a detection range of 0.03 to 350 ppm. In addition, a subsample was analyzed for multi-element geochemistry using ALS method ME-ICP61 (34-element, four-acid ICP-AES). The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is stated as the Qualified Person who approved the scientific and technical disclosure.
Evidence · text
“Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person has approved the scientific and technical disclosure in this release.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The 2026 drill program explicitly includes infill drilling to tighten spacing and improve model confidence for the PFS.
Evidence · text
“The ~50,000 m program combines infill, condemnation, and geotechnical drilling to accelerate critical inputs for the upcoming PFS, with a primary focus on tightening spacing within the higher-grade corridors across the Dolphin–Cleary–WOW trend”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drill program includes stepping out eastward into the emerging Tamarack area, indicating an extension of mineralization.
Evidence · text
“stepping out eastward into the emerging Tamarack area.”
PFS-Supportingneutral · Story-specific tag
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: The entire drill program is explicitly aimed at accelerating technical work required for the upcoming Pre-Feasibility Study (PFS).
Evidence · text
“The program is targeting higher-grade corridors and accelerating the technical work required for the upcoming Pre-Feasibility Study (PFS).”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole GS2548 returned 23.38 g/t Au over 1.9 m and 15.43 g/t Au over 3.1 m, which are exceptionally high grades for gold.
Evidence · text
“1.43 g/t Au over 74.9 m (from 316.1 m) , including 23.38 g/t Au over 1.9 m ; and 2.29 g/t Au over 27.4 m (from 471.5 m) , including 15.43 g/t Au over 3.1 m .”
Strong Continuitypositive · Story-specific tag
No canonical definition is currently available.
Why it applies: The release highlights 'strong continuity of Au mineralization across the Dolphin-Cleary-WOW trend' and that mineralized corridors are traceable over ~1.5 km.
Evidence · text
“reinforcing the strong continuity of Au mineralization across the Dolphin-Cleary-WOW trend”
Extracted facts
Stored fact records: 31. Some facts used in scoring do not have a stored record.
Drill Results (31)
GS2548Golden Summit · goldGrade: 0.85Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 44.8 m
- To
- 56.9 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:44.8-56.9
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, contributing to the overall understanding of the deposit but not a highlight. The lack of true width is a minor negative.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.85”
Context: 12.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2548Golden Summit · goldGrade: 0.78Grade Unit: g/tIntercept: 30.8 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 30.8 m
- From
- 248.7 m
- To
- 279.5 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:248.7-279.5
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall understanding of the deposit. The lack of true width is a minor negative.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.78”
Context: 30.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2548Golden Summit · goldGrade: 1.43Grade Unit: g/tIntercept: 74.9 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.43
- Grade Unit
- g/t
- Intercept
- 74.9 m
- From
- 316.1 m
- To
- 391 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:316.1-391
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a very strong intercept with good grade and significant width, indicating substantial gold mineralization. It is a key highlight of the release and highly material for the project's open-pit potential.
Positive factors
- Strong gold grade over a significant width (1.43 g/t Au over 74.9 m) is highly material for an open-pit scenario.
- This intercept contributes to the overall continuity and scale of the mineralization.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.43”
Context: 74.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2548Golden Summit · goldGrade: 23.38Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 23.38
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 364.8 m
- To
- 366.7 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:364.8-366.7
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, indicating very high-grade gold mineralization. While narrow, it significantly boosts the average grade of the broader interval and is a strong positive.
Positive factors
- Exceptional bonanza gold grade (23.38 g/t Au) within a broader mineralized zone.
Negative factors
- Narrow intercept width (1.9 m) limits overall impact.
- True width not determined, potentially overstating actual thickness.
Evidence · table
“23.38”
Context: 1.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2548Golden Summit · goldGrade: 2.29Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.29
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 471.5 m
- To
- 498.9 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:471.5-498.9
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a strong intercept with good grade and width, indicating significant gold mineralization and contributing positively to the project's potential.
Positive factors
- Strong gold grade (2.29 g/t Au) over a good width (27.4 m) is material for an open-pit scenario.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“2.29”
Context: 27.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2548Golden Summit · goldGrade: 15.43Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 15.43
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 492.8 m
- To
- 495.9 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:492.8-495.9
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, indicating very high-grade gold mineralization. While narrow, it significantly boosts the average grade of the broader interval and is a strong positive.
Positive factors
- Exceptional bonanza gold grade (15.43 g/t Au) within a broader mineralized zone.
Negative factors
- Narrow intercept width (3.1 m) limits overall impact.
- True width not determined, potentially overstating actual thickness.
Evidence · table
“15.43”
Context: 3.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2548Golden Summit · goldGrade: 0.89Grade Unit: g/tIntercept: 250.2 mView all detailsHide details
Identity
- Hole ID
- GS2548
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 250.2 m
- From
- 248.7 m
- To
- 498.9 m
- Hole Depth
- 614.8 m
- Intercept Depth
- 44.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2548:248.7-498.9
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215544
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is an exceptionally wide intercept with a good average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is highly material and a strong positive.
Positive factors
- Very wide intercept (250.2 m) with a good average gold grade (0.89 g/t Au) indicates significant bulk tonnage potential.
- This broad zone includes multiple higher-grade sub-intervals, enhancing its overall value.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.89”
Context: 250.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2552Golden Summit · goldGrade: 14.76Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- GS2552
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 14.76
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 20.4 m
- To
- 23.5 m
- Hole Depth
- 602.6 m
- Intercept Depth
- 20.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2552:20.4-23.5
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479761
- Northing
- 7215501
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept at a shallow depth, which is a strong positive for potential early-stage mining. While narrow, it indicates very high-grade mineralization.
Positive factors
- Exceptional bonanza gold grade (14.76 g/t Au) at a shallow depth.
Negative factors
- Narrow intercept width (3.1 m) limits overall impact.
- True width not determined, potentially overstating actual thickness.
Evidence · table
“14.76”
Context: 3.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2552Golden Summit · goldGrade: 7.88Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- GS2552
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 7.88
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 306.9 m
- To
- 310 m
- Hole Depth
- 602.6 m
- Intercept Depth
- 20.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2552:306.9-310
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479761
- Northing
- 7215501
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a strong gold intercept, indicating high-grade mineralization. While narrow, it is a positive result.
Positive factors
- Strong gold grade (7.88 g/t Au) over a narrow but significant interval.
Negative factors
- Narrow intercept width (3.1 m) limits overall impact.
- True width not determined, potentially overstating actual thickness.
Evidence · table
“7.88”
Context: 3.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2552Golden Summit · goldGrade: 0.68Grade Unit: g/tIntercept: 243.9 mView all detailsHide details
Identity
- Hole ID
- GS2552
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 243.9 m
- From
- 358.7 m
- To
- 602.6 m
- Hole Depth
- 602.6 m
- Intercept Depth
- 20.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2552:358.7-602.6
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479761
- Northing
- 7215501
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is an exceptionally wide intercept with a moderate average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is highly material and a strong positive.
Positive factors
- Very wide intercept (243.9 m) with a moderate average gold grade (0.68 g/t Au) indicates significant bulk tonnage potential.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.68”
Context: 243.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2552Golden Summit · goldGrade: 1.15Grade Unit: g/tIntercept: 24.4 mView all detailsHide details
Identity
- Hole ID
- GS2552
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 24.4 m
- From
- 358.7 m
- To
- 383.1 m
- Hole Depth
- 602.6 m
- Intercept Depth
- 20.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2552:358.7-383.1
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479761
- Northing
- 7215501
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a good intercept with moderate grade and width, contributing positively to the overall mineralization profile.
Positive factors
- Good gold grade (1.15 g/t Au) over a good width (24.4 m) within a broader mineralized zone.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.15”
Context: 24.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2552Golden Summit · goldGrade: 0.77Grade Unit: g/tIntercept: 79.2 mView all detailsHide details
Identity
- Hole ID
- GS2552
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 79.2 m
- From
- 422.8 m
- To
- 502 m
- Hole Depth
- 602.6 m
- Intercept Depth
- 20.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2552:422.8-502
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479761
- Northing
- 7215501
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a wide intercept with a moderate average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is a strong positive.
Positive factors
- Wide intercept (79.2 m) with a moderate average gold grade (0.77 g/t Au) indicates significant bulk tonnage potential.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.77”
Context: 79.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2552Golden Summit · goldGrade: 0.93Grade Unit: g/tIntercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- GS2552
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.93
- Grade Unit
- g/t
- Intercept
- 51.8 m
- From
- 550.8 m
- To
- 602.6 m
- Hole Depth
- 602.6 m
- Intercept Depth
- 20.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2552:550.8-602.6
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479761
- Northing
- 7215501
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a good intercept with moderate grade and significant width, indicating continued mineralization at depth and contributing positively to the project's potential.
Positive factors
- Good gold grade (0.93 g/t Au) over a significant width (51.8 m) at depth, ending in mineralization.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.93”
Context: 51.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2549Golden Summit · goldGrade: 0.62Grade Unit: g/tIntercept: 221 mView all detailsHide details
Identity
- Hole ID
- GS2549
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.62
- Grade Unit
- g/t
- Intercept
- 221 m
- From
- 377.9 m
- To
- 598.9 m
- Hole Depth
- 808.3 m
- Intercept Depth
- 377.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2549:377.9-598.9
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479698
- Northing
- 7215251
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is an exceptionally wide intercept with a moderate average grade, suggesting significant bulk tonnage potential for an open-pit operation. Its location extending towards Tamarack is a positive for expansion.
Positive factors
- Very wide intercept (221.0 m) with a moderate average gold grade (0.62 g/t Au) indicates significant bulk tonnage potential.
- Extends mineralization towards the Tamarack area, showing expansion potential.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.62”
Context: 221.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2549Golden Summit · goldGrade: 0.96Grade Unit: g/tIntercept: 88.1 mView all detailsHide details
Identity
- Hole ID
- GS2549
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 88.1 m
- From
- 510.8 m
- To
- 598.9 m
- Hole Depth
- 808.3 m
- Intercept Depth
- 377.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2549:510.8-598.9
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479698
- Northing
- 7215251
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a wide intercept with a good average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is a strong positive.
Positive factors
- Wide intercept (88.1 m) with a good average gold grade (0.96 g/t Au) within a broader mineralized zone.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.96”
Context: 88.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2549Golden Summit · goldGrade: 0.76Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- GS2549
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 757.1 m
- To
- 766.3 m
- Hole Depth
- 808.3 m
- Intercept Depth
- 377.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2549:757.1-766.3
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479698
- Northing
- 7215251
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, contributing to the overall understanding of the deposit but not a highlight. The lack of true width is a minor negative.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.76”
Context: 9.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 0.79Grade Unit: g/tIntercept: 138.3 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 138.3 m
- From
- 215.4 m
- To
- 353.7 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:215.4-353.7
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a very wide intercept with a moderate average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is a strong positive for continuity.
Positive factors
- Very wide intercept (138.3 m) with a moderate average gold grade (0.79 g/t Au) indicates significant bulk tonnage potential.
- Enhances continuity of the Dolphin–Cleary–WOW trend.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.79”
Context: 138.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 1.52Grade Unit: g/tIntercept: 22.8 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 22.8 m
- From
- 330.9 m
- To
- 353.7 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:330.9-353.7
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a strong intercept with good grade and width, indicating significant gold mineralization and contributing positively to the project's potential.
Positive factors
- Strong gold grade (1.52 g/t Au) over a good width (22.8 m) within a broader mineralized zone.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.52”
Context: 22.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 1.35Grade Unit: g/tIntercept: 80.1 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.35
- Grade Unit
- g/t
- Intercept
- 80.1 m
- From
- 409.7 m
- To
- 489.8 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:409.7-489.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a very strong intercept with good grade and significant width, indicating substantial gold mineralization. It is a key highlight of the release and highly material for the project's open-pit potential.
Positive factors
- Strong gold grade (1.35 g/t Au) over a significant width (80.1 m) is highly material for an open-pit scenario.
- This intercept contributes to the overall continuity and scale of the mineralization.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.35”
Context: 80.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 2.13Grade Unit: g/tIntercept: 39.6 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.13
- Grade Unit
- g/t
- Intercept
- 39.6 m
- From
- 450.2 m
- To
- 489.8 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:450.2-489.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a strong intercept with good grade and width, indicating significant gold mineralization and contributing positively to the project's potential.
Positive factors
- Strong gold grade (2.13 g/t Au) over a good width (39.6 m) within a broader mineralized zone.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“2.13”
Context: 39.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 58 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 58 m
- From
- 523.3 m
- To
- 581.3 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:523.3-581.3
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a good intercept with moderate grade and significant width, indicating continued mineralization at depth and contributing positively to the project's potential.
Positive factors
- Good gold grade (0.97 g/t Au) over a significant width (58.0 m) at depth.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.97”
Context: 58
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 1.92Grade Unit: g/tIntercept: 15.6 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.92
- Grade Unit
- g/t
- Intercept
- 15.6 m
- From
- 523.3 m
- To
- 538.9 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:523.3-538.9
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a strong intercept with good grade and width, indicating significant gold mineralization and contributing positively to the project's potential.
Positive factors
- Strong gold grade (1.92 g/t Au) over a good width (15.6 m) within a broader mineralized zone.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.92”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2550Golden Summit · goldGrade: 0.81Grade Unit: g/tIntercept: 365.9 mView all detailsHide details
Identity
- Hole ID
- GS2550
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 365.9 m
- From
- 215.4 m
- To
- 581.3 m
- Hole Depth
- 703.2 m
- Intercept Depth
- 215.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2550:215.4-581.3
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479145
- Northing
- 7215235
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is an exceptionally wide intercept with a good average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is highly material and a strong positive.
Positive factors
- Exceptionally wide intercept (365.9 m) with a good average gold grade (0.81 g/t Au) indicates significant bulk tonnage potential.
- This broad zone includes multiple higher-grade sub-intervals, enhancing its overall value.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.81”
Context: 365.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 1.07Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 118.6 m
- To
- 127.7 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:118.6-127.7
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall understanding of the deposit. The lack of true width is a minor negative.
Positive factors
- Moderate gold grade (1.07 g/t Au) over a narrow width.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.07”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 0.87Grade Unit: g/tIntercept: 20.9 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 20.9 m
- From
- 201.9 m
- To
- 222.8 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:201.9-222.8
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing positively to the overall mineralization profile. The lack of true width is a minor negative.
Positive factors
- Moderate gold grade (0.87 g/t Au) over a good width.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.87”
Context: 20.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 1.21Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 302 m
- To
- 320 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:302-320
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows a good gold grade over a good width, contributing positively to the overall mineralization profile. The lack of true width is a minor negative.
Positive factors
- Good gold grade (1.21 g/t Au) over a good width.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.21”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 0.78Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 371 m
- To
- 389 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:371-389
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing positively to the overall mineralization profile. The lack of true width is a minor negative.
Positive factors
- Moderate gold grade (0.78 g/t Au) over a good width.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.78”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 0.9Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 437 m
- To
- 449 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:437-449
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall understanding of the deposit. The lack of true width is a minor negative.
Positive factors
- Moderate gold grade (0.90 g/t Au) over a narrow width.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.90”
Context: 12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 1.06Grade Unit: g/tIntercept: 55.4 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 55.4 m
- From
- 500 m
- To
- 555.4 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:500-555.4
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a good intercept with moderate grade and significant width, indicating continued mineralization at depth and contributing positively to the project's potential.
Positive factors
- Good gold grade (1.06 g/t Au) over a significant width (55.4 m) at depth.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.06”
Context: 55.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 1.14Grade Unit: g/tIntercept: 45 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 45 m
- From
- 638 m
- To
- 683 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:638-683
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is a good intercept with moderate grade and significant width, indicating continued mineralization at depth and contributing positively to the project's potential.
Positive factors
- Good gold grade (1.14 g/t Au) over a significant width (45.0 m) at depth.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“1.14”
Context: 45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2547Golden Summit · goldGrade: 0.53Grade Unit: g/tIntercept: 484.3 mView all detailsHide details
Identity
- Hole ID
- GS2547
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 484.3 m
- From
- 198.7 m
- To
- 683 m
- Hole Depth
- 701.7 m
- Intercept Depth
- 118.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2547:198.7-683
- Mining Method
- open_pit
Location
- Location
- WOW Zone
- Easting
- 478667
- Northing
- 7215053
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-05T00:00:00.000Z
Reasoning: This is an exceptionally wide intercept with a moderate average grade, suggesting significant bulk tonnage potential for an open-pit operation. It is highly material and a strong positive.
Positive factors
- Exceptionally wide intercept (484.3 m) with a moderate average gold grade (0.53 g/t Au) indicates significant bulk tonnage potential.
- This broad zone includes multiple higher-grade sub-intervals, enhancing its overall value.
Negative factors
- True width not determined, potentially overstating actual thickness.
Evidence · table
“0.53”
Context: 484.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.