Freegold Drills 19.2 g/t Au over 24.7m and 33.7 g/t Au over 19.5m in Infill Drilling at Golden Summit
Original announcement by tmx on
- Company
- Freegold Ventures Limited
- Ticker
- FVL
- Exchange
- TSX
- Region
- Alaska
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-12 03:33:12 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Freegold Ventures Limited has reported high-grade gold drill results from infill drilling at its Golden Summit Project in Alaska, including intercepts of 19.2 g/t Au over 24.7m and 33.7 g/t Au over 19.5m. This drilling aims to increase confidence in higher-grade domains to support an upcoming mineral resource update and Pre-Feasibility Study. The company highlighted broad mineralized intervals and the expansion of high-grade corridors over 1.5 km, reinforcing the project's scale and continuity.
Reasoning: The document reports exceptional high-grade gold intercepts and broad mineralized zones from infill drilling, which significantly de-risk the project and support its scale. The drilling is directly aimed at advancing the project towards a PFS and resource update, indicating strong progress. While true widths are not stated and the resource estimate is historical, the overall results are highly positive for the project's development.
Positive factors
- Multiple bonanza-grade gold intercepts reported, including 115.85 g/t Au over 3.1 m and 263.90 g/t Au over 2.4 m.
- Broad mineralized intervals, such as 289.6 m at 0.97 g/t Au, support the project's scale and continuity.
- Infill drilling is designed to increase confidence for an upcoming mineral resource update and Pre-Feasibility Study (PFS).
- High-grade corridors have been traced for over 1.5 km, indicating significant strike potential.
- Comprehensive QA/QC procedures are disclosed, including certified labs and QP sign-off.
Negative factors
- Interval widths are reported as downhole intercepts, and true widths cannot be determined due to uncertain geometry.
- The historical resource estimate is over a year old, indicating a need for an updated estimate.
- Presence of arsenopyrite and jamesonite suggests potential for deleterious elements, which could impact metallurgy.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 48
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Multiple intercepts, such as 115.85 g/t Au over 3.1 m and 263.90 g/t Au over 2.4 m, report exceptionally high gold grades well above the deposit-type norm.
Evidence · text
“115.85 g/t Au over 3.1 m and 61.20 g/t Au over 1.9 m in GS2556, 33.71 g/t Au over 19.5 m including 263.90 g/t Au over 2.4 m in GS2558, and 347.90 g/t Au over 1.4 m in GS2559.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that interval widths refer to drill hole intercepts and true width cannot be determined due to uncertain geometry.
Evidence · text
“The interval width refers to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated 'Analytical Program and QA/QC' section detailing laboratory procedures, standards, blanks, and duplicates.
Evidence · text
“Analytical Program and QA/QC HQ core is logged, photographed and cut in half using a diamond saw. One-half is placed in sealed bags for preparation and subsequent geochemical analysis by ALS facilities in Vancouver and Thunder Bay. ... The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drilling program is explicitly described as 'infill drilling' designed to increase confidence in higher-grade domains.
Evidence · text
“ongoing infill drilling is designed to increase confidence in the higher-grade domains expected to support the next mineral resource update and the upcoming Pre-Feasibility Study (PFS).”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenopyrite and jamesonite, which contain arsenic and antimony respectively, are noted as associated minerals in several high-grade intervals.
Evidence · text
“Visible gold was observed along vein margins, and arsenopyrite and jamesonite were also noted.”
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: The document reports an 'Indicated Primary Mineral Resource' of 17.2 million ounces of gold.
Evidence · text
“Indicated Primary Mineral Resource of 17.2 million ounces at 1.24 g/t Au (432 million tonnes)”
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The document reports an 'Inferred Primary Mineral Resource' of 11.9 million ounces of gold.
Evidence · text
“Inferred Primary Mineral Resource of 11.9 million ounces at 1.04 g/t Au (358 million tonnes)”
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: The reported mineral resource estimate has an effective date of July 2025, while the announcement is in May 2026, making it over a year old.
Evidence · text
“As of July 2025, Golden Summit hosts an Indicated Primary Mineral Resource”
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: The historical resource estimate explicitly states a cut-off grade of 0.5 g/t Au.
Evidence · text
“using a 0.5 g/t cut-off grade and a gold price of $2,490.”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Alvin Jackson, P.Geo., is named as the Qualified Person who approved the scientific and technical disclosure.
Evidence · text
“Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
Extracted facts
Stored fact records: 48. Some facts used in scoring do not have a stored record.
Drill Results (46)
GS2553Golden Summit · goldGrade: 0.95Grade Unit: g/tIntercept: 10.2 mView all detailsHide details
Identity
- Hole ID
- GS2553
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.95
- Grade Unit
- g/t
- Intercept
- 10.2 m
- From
- 27.8 m
- To
- 38 m
- Hole Depth
- 649 m
- Intercept Depth
- 27.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2553:27.8-38
- Mining Method
- open_pit
Location
- Easting
- 479703
- Northing
- 7215552
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.95”
Context: 10.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2553Golden Summit · goldGrade: 0.62Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- GS2553
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.62
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 301 m
- To
- 322 m
- Hole Depth
- 649 m
- Intercept Depth
- 27.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2553:301-322
- Mining Method
- open_pit
Location
- Easting
- 479703
- Northing
- 7215552
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.62”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2553Golden Summit · goldGrade: 35.73Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2553
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 35.73
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 391 m
- To
- 394 m
- Hole Depth
- 649 m
- Intercept Depth
- 27.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2553:391-394
- Mining Method
- open_pit
Location
- Easting
- 479703
- Northing
- 7215552
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, indicating a high-grade zone within the deposit.
Positive factors
- Exceptional gold grade (35.73 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (107.19 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“35.73”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2553Golden Summit · goldGrade: 1.12Grade Unit: g/tIntercept: 31.4 mView all detailsHide details
Identity
- Hole ID
- GS2553
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 31.4 m
- From
- 436.3 m
- To
- 467.7 m
- Hole Depth
- 649 m
- Intercept Depth
- 27.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2553:436.3-467.7
- Mining Method
- open_pit
Location
- Easting
- 479703
- Northing
- 7215552
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate interval, supporting the overall resource.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.12”
Context: 31.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2553Golden Summit · goldGrade: 44.47Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- GS2553
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 44.47
- Grade Unit
- g/t
- Intercept
- 2.2 m
- From
- 555.7 m
- To
- 557.9 m
- Hole Depth
- 649 m
- Intercept Depth
- 27.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2553:555.7-557.9
- Mining Method
- open_pit
Location
- Easting
- 479703
- Northing
- 7215552
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, indicating a high-grade zone within the deposit.
Positive factors
- Exceptional gold grade (44.47 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (97.834 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“44.47”
Context: 2.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2553Golden Summit · goldGrade: 1.69Grade Unit: g/tIntercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- GS2553
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.69
- Grade Unit
- g/t
- Intercept
- 11.1 m
- From
- 603.7 m
- To
- 614.8 m
- Hole Depth
- 649 m
- Intercept Depth
- 27.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2553:603.7-614.8
- Mining Method
- open_pit
Location
- Easting
- 479703
- Northing
- 7215552
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Strong gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.69”
Context: 11.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 0.93Grade Unit: g/tIntercept: 5.2 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.93
- Grade Unit
- g/t
- Intercept
- 5.2 m
- From
- 102.7 m
- To
- 107.9 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:102.7-107.9
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.93”
Context: 5.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 1.07Grade Unit: g/tIntercept: 25.9 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 25.9 m
- From
- 216.7 m
- To
- 242.6 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:216.7-242.6
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a strong interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.07”
Context: 25.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 3.6Grade Unit: g/tIntercept: 26.9 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 26.9 m
- From
- 329.4 m
- To
- 356.3 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:329.4-356.3
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a strong interval, indicating a significant mineralized zone.
Positive factors
- Exceptional gold grade (3.60 g/t Au) exceeds open-pit thresholds.
- Strong grade-thickness product (96.84 g/t·m) indicates significant mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“3.60”
Context: 26.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 25.36Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 25.36
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 337.4 m
- To
- 339.8 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:337.4-339.8
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, representing a high-grade sub-interval.
Positive factors
- Exceptional gold grade (25.36 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (60.864 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“25.36”
Context: 2.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 0.7Grade Unit: g/tIntercept: 20.4 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 20.4 m
- From
- 377.6 m
- To
- 398 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:377.6-398
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.70”
Context: 20.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 19.22Grade Unit: g/tIntercept: 24.7 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 19.22
- Grade Unit
- g/t
- Intercept
- 24.7 m
- From
- 461.8 m
- To
- 486.5 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:461.8-486.5
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a strong interval, representing a highly significant mineralized zone.
Positive factors
- Exceptional gold grade (19.22 g/t Au) significantly exceeds open-pit thresholds.
- Exceptional grade-thickness product (474.834 g/t·m) indicates very strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“19.22”
Context: 24.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 30.01Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 30.01
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 461.8 m
- To
- 464.8 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:461.8-464.8
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, representing a high-grade sub-interval.
Positive factors
- Exceptional gold grade (30.01 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (90.03 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“30.01”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 115.85Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 115.85
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 471.5 m
- To
- 474.6 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:471.5-474.6
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, representing a bonanza-grade sub-interval.
Positive factors
- Exceptional gold grade (115.85 g/t Au) significantly exceeds open-pit thresholds.
- Exceptional grade-thickness product (359.135 g/t·m) indicates very strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“115.85”
Context: 3.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 0.74Grade Unit: g/tIntercept: 15.6 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 15.6 m
- From
- 498.5 m
- To
- 514.1 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:498.5-514.1
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.74”
Context: 15.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 61.2Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 61.2
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 548.9 m
- To
- 550.8 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:548.9-550.8
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, representing a high-grade zone.
Positive factors
- Exceptional gold grade (61.20 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (116.28 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“61.20”
Context: 1.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2556Golden Summit · goldGrade: 0.62Grade Unit: g/tIntercept: 25.3 mView all detailsHide details
Identity
- Hole ID
- GS2556
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.62
- Grade Unit
- g/t
- Intercept
- 25.3 m
- From
- 591.3 m
- To
- 616.6 m
- Hole Depth
- 636.1 m
- Intercept Depth
- 102.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2556:591.3-616.6
- Mining Method
- open_pit
Location
- Easting
- 479708
- Northing
- 7215409
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over a strong interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.62”
Context: 25.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2558Golden Summit · goldGrade: 0.77Grade Unit: g/tIntercept: 23.9 mView all detailsHide details
Identity
- Hole ID
- GS2558
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 23.9 m
- From
- 88 m
- To
- 111.9 m
- Hole Depth
- 642.2 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2558:88-111.9
- Mining Method
- open_pit
Location
- Easting
- 479809
- Northing
- 7215505
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over a strong interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.77”
Context: 23.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2558Golden Summit · goldGrade: 0.94Grade Unit: g/tIntercept: 18.6 mView all detailsHide details
Identity
- Hole ID
- GS2558
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 18.6 m
- From
- 449.2 m
- To
- 467.8 m
- Hole Depth
- 642.2 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2558:449.2-467.8
- Mining Method
- open_pit
Location
- Easting
- 479809
- Northing
- 7215505
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.94”
Context: 18.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2558Golden Summit · goldGrade: 0.8Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- GS2558
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 483.1 m
- To
- 501.1 m
- Hole Depth
- 642.2 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2558:483.1-501.1
- Mining Method
- open_pit
Location
- Easting
- 479809
- Northing
- 7215505
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.80”
Context: 18.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2558Golden Summit · goldGrade: 21.24Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- GS2558
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 21.24
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 587.3 m
- To
- 589.4 m
- Hole Depth
- 642.2 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2558:587.3-589.4
- Mining Method
- open_pit
Location
- Easting
- 479809
- Northing
- 7215505
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, indicating a high-grade zone.
Positive factors
- Exceptional gold grade (21.24 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (44.604 g/t·m) indicates moderate mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“21.24”
Context: 2.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2558Golden Summit · goldGrade: 33.71Grade Unit: g/tIntercept: 19.5 mView all detailsHide details
Identity
- Hole ID
- GS2558
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 33.71
- Grade Unit
- g/t
- Intercept
- 19.5 m
- From
- 606.5 m
- To
- 626 m
- Hole Depth
- 642.2 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2558:606.5-626
- Mining Method
- open_pit
Location
- Easting
- 479809
- Northing
- 7215505
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a strong interval, representing a highly significant mineralized zone.
Positive factors
- Exceptional gold grade (33.71 g/t Au) significantly exceeds open-pit thresholds.
- Exceptional grade-thickness product (657.345 g/t·m) indicates very strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“33.71”
Context: 19.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2558Golden Summit · goldGrade: 263.9Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- GS2558
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 263.9
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 623.6 m
- To
- 626 m
- Hole Depth
- 642.2 m
- Intercept Depth
- 88 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2558:623.6-626
- Mining Method
- open_pit
Location
- Easting
- 479809
- Northing
- 7215505
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, representing a bonanza-grade sub-interval.
Positive factors
- Exceptional gold grade (263.90 g/t Au) significantly exceeds open-pit thresholds.
- Exceptional grade-thickness product (633.36 g/t·m) indicates very strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“263.90”
Context: 2.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 2.93Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.93
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 33.9 m
- To
- 41 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:33.9-41
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Strong gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“2.93”
Context: 7.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 4.14Grade Unit: g/tIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 4.14
- Grade Unit
- g/t
- Intercept
- 5.8 m
- From
- 125.6 m
- To
- 131.4 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:125.6-131.4
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a moderate interval, indicating a high-grade zone.
Positive factors
- Exceptional gold grade (4.14 g/t Au) exceeds open-pit thresholds.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“4.14”
Context: 5.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 1.02Grade Unit: g/tIntercept: 13 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 13 m
- From
- 261 m
- To
- 274 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:261-274
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.02”
Context: 13.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 1.96Grade Unit: g/tIntercept: 27 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.96
- Grade Unit
- g/t
- Intercept
- 27 m
- From
- 311 m
- To
- 338 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:311-338
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Strong gold grade over a strong interval, contributing significantly to resource definition.
Positive factors
- Strong gold grade (1.96 g/t Au) exceeds open-pit thresholds.
- Strong grade-thickness product (52.92 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.96”
Context: 27.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 0.99Grade Unit: g/tIntercept: 42.4 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 42.4 m
- From
- 459.7 m
- To
- 502.1 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:459.7-502.1
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a continuous interval, supporting the overall resource.
Positive factors
- Strong grade-thickness product (41.976 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.99”
Context: 42.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 0.82Grade Unit: g/tIntercept: 45.5 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 45.5 m
- From
- 525.7 m
- To
- 571.2 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:525.7-571.2
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a continuous interval, supporting the overall resource.
Positive factors
- Strong grade-thickness product (37.31 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.82”
Context: 45.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 0.98Grade Unit: g/tIntercept: 48 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 48 m
- From
- 584 m
- To
- 632 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:584-632
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a continuous interval, supporting the overall resource.
Positive factors
- Strong grade-thickness product (47.04 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.98”
Context: 48.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 0.6Grade Unit: g/tIntercept: 21.5 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 21.5 m
- From
- 653.9 m
- To
- 675.4 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:653.9-675.4
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over a strong interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.60”
Context: 21.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 347.9Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 347.9
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 698 m
- To
- 699.4 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:698-699.4
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, representing a bonanza-grade zone.
Positive factors
- Exceptional gold grade (347.90 g/t Au) significantly exceeds open-pit thresholds.
- Exceptional grade-thickness product (487.06 g/t·m) indicates very strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“347.90”
Context: 1.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2559Golden Summit · goldGrade: 0.81Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- GS2559
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 720.5 m
- To
- 723.1 m
- Hole Depth
- 756.2 m
- Intercept Depth
- 33.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2559:720.5-723.1
- Mining Method
- open_pit
Location
- Easting
- 479747
- Northing
- 7215395
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.81”
Context: 2.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2555Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 289.6 mView all detailsHide details
Identity
- Hole ID
- GS2555
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 289.6 m
- From
- 258.1 m
- To
- 547.7 m
- Hole Depth
- 797.7 m
- Intercept Depth
- 258.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2555:258.1-547.7
- Mining Method
- open_pit
Location
- Easting
- 478910
- Northing
- 7215095
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over an exceptionally wide continuous interval, highlighting the project's scale.
Positive factors
- Exceptional grade-thickness product (280.912 g/t·m) indicates very strong mineralization.
- Continuous interval width (289.6 m) is exceptional, indicating a large-scale mineralized zone.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.97”
Context: 289.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2555Golden Summit · goldGrade: 1.15Grade Unit: g/tIntercept: 167.7 mView all detailsHide details
Identity
- Hole ID
- GS2555
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 167.7 m
- From
- 258.1 m
- To
- 425.8 m
- Hole Depth
- 797.7 m
- Intercept Depth
- 258.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2555:258.1-425.8
- Mining Method
- open_pit
Location
- Easting
- 478910
- Northing
- 7215095
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Strong gold grade over an exceptionally wide continuous interval, representing a significant sub-interval.
Positive factors
- Strong gold grade (1.15 g/t Au) exceeds open-pit thresholds.
- Strong grade-thickness product (192.855 g/t·m) indicates strong mineralization.
- Continuous interval width (167.7 m) is exceptional, indicating a large-scale mineralized zone.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.15”
Context: 167.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2555Golden Summit · goldGrade: 0.82Grade Unit: g/tIntercept: 22.8 mView all detailsHide details
Identity
- Hole ID
- GS2555
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 22.8 m
- From
- 442.6 m
- To
- 465.4 m
- Hole Depth
- 797.7 m
- Intercept Depth
- 258.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2555:442.6-465.4
- Mining Method
- open_pit
Location
- Easting
- 478910
- Northing
- 7215095
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a strong interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.82”
Context: 22.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2555Golden Summit · goldGrade: 0.88Grade Unit: g/tIntercept: 73.1 mView all detailsHide details
Identity
- Hole ID
- GS2555
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 73.1 m
- From
- 474.6 m
- To
- 547.7 m
- Hole Depth
- 797.7 m
- Intercept Depth
- 258.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2555:474.6-547.7
- Mining Method
- open_pit
Location
- Easting
- 478910
- Northing
- 7215095
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a continuous interval, supporting the overall resource.
Positive factors
- Strong grade-thickness product (64.328 g/t·m) indicates strong mineralization.
- Continuous interval width (73.1 m) is exceptional, indicating a large-scale mineralized zone.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.88”
Context: 73.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2555Golden Summit · goldGrade: 1.25Grade Unit: g/tIntercept: 14.3 mView all detailsHide details
Identity
- Hole ID
- GS2555
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 14.3 m
- From
- 731.5 m
- To
- 745.8 m
- Hole Depth
- 797.7 m
- Intercept Depth
- 258.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2555:731.5-745.8
- Mining Method
- open_pit
Location
- Easting
- 478910
- Northing
- 7215095
- Azimuth
- 360 °
- Dip
- -80 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.25”
Context: 14.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2554Golden Summit · goldGrade: 1.4Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- GS2554
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 306.6 m
- To
- 313 m
- Hole Depth
- 551 m
- Intercept Depth
- 306.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2554:306.6-313
- Mining Method
- open_pit
Location
- Easting
- 478457
- Northing
- 7215256
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.40”
Context: 6.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2554Golden Summit · goldGrade: 1.13Grade Unit: g/tIntercept: 17.1 mView all detailsHide details
Identity
- Hole ID
- GS2554
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.13
- Grade Unit
- g/t
- Intercept
- 17.1 m
- From
- 325.7 m
- To
- 342.8 m
- Hole Depth
- 551 m
- Intercept Depth
- 306.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2554:325.7-342.8
- Mining Method
- open_pit
Location
- Easting
- 478457
- Northing
- 7215256
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.13”
Context: 17.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2557Golden Summit · goldGrade: 2.34Grade Unit: g/tIntercept: 4.8 mView all detailsHide details
Identity
- Hole ID
- GS2557
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.34
- Grade Unit
- g/t
- Intercept
- 4.8 m
- From
- 57.2 m
- To
- 62 m
- Hole Depth
- 713 m
- Intercept Depth
- 57.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2557:57.2-62
- Mining Method
- open_pit
Location
- Easting
- 478555
- Northing
- 7215102
- Azimuth
- 360 °
- Dip
- -65 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Strong gold grade over a narrow interval, contributing to resource definition.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“2.34”
Context: 4.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2557Golden Summit · goldGrade: 54.94Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- GS2557
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 54.94
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 86 m
- To
- 86.9 m
- Hole Depth
- 713 m
- Intercept Depth
- 57.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2557:86-86.9
- Mining Method
- open_pit
Location
- Easting
- 478555
- Northing
- 7215102
- Azimuth
- 360 °
- Dip
- -65 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, indicating a high-grade zone.
Positive factors
- Exceptional gold grade (54.94 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (49.446 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“54.94”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2557Golden Summit · goldGrade: 58.44Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2557
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 58.44
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 311 m
- To
- 314 m
- Hole Depth
- 713 m
- Intercept Depth
- 57.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2557:311-314
- Mining Method
- open_pit
Location
- Easting
- 478555
- Northing
- 7215102
- Azimuth
- 360 °
- Dip
- -65 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Exceptional gold grade over a narrow interval, indicating a high-grade zone.
Positive factors
- Exceptional gold grade (58.44 g/t Au) significantly exceeds open-pit thresholds.
- High grade-thickness product (175.32 g/t·m) indicates strong mineralization.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“58.44”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2557Golden Summit · goldGrade: 0.75Grade Unit: g/tIntercept: 236.5 mView all detailsHide details
Identity
- Hole ID
- GS2557
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 236.5 m
- From
- 394.2 m
- To
- 630.7 m
- Hole Depth
- 713 m
- Intercept Depth
- 57.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2557:394.2-630.7
- Mining Method
- open_pit
Location
- Easting
- 478555
- Northing
- 7215102
- Azimuth
- 360 °
- Dip
- -65 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Weak gold grade over an exceptionally wide continuous interval, highlighting the project's scale.
Positive factors
- Strong grade-thickness product (177.375 g/t·m) indicates strong mineralization.
- Continuous interval width (236.5 m) is exceptional, indicating a large-scale mineralized zone.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“0.75”
Context: 236.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2557Golden Summit · goldGrade: 1.25Grade Unit: g/tIntercept: 57 mView all detailsHide details
Identity
- Hole ID
- GS2557
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 57 m
- From
- 509 m
- To
- 566 m
- Hole Depth
- 713 m
- Intercept Depth
- 57.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2557:509-566
- Mining Method
- open_pit
Location
- Easting
- 478555
- Northing
- 7215102
- Azimuth
- 360 °
- Dip
- -65 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a continuous interval, representing a significant sub-interval.
Positive factors
- Strong grade-thickness product (71.25 g/t·m) indicates strong mineralization.
- Continuous interval width (57.0 m) is exceptional, indicating a large-scale mineralized zone.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.25”
Context: 57.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2557Golden Summit · goldGrade: 1.26Grade Unit: g/tIntercept: 37.8 mView all detailsHide details
Identity
- Hole ID
- GS2557
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 37.8 m
- From
- 592.9 m
- To
- 630.7 m
- Hole Depth
- 713 m
- Intercept Depth
- 57.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2557:592.9-630.7
- Mining Method
- open_pit
Location
- Easting
- 478555
- Northing
- 7215102
- Azimuth
- 360 °
- Dip
- -65 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Moderate gold grade over a continuous interval, representing a significant sub-interval.
Positive factors
- Strong grade-thickness product (47.628 g/t·m) indicates strong mineralization.
- Continuous interval width (37.8 m) is strong, indicating a significant mineralized zone.
Negative factors
- Apparent width only reported, true width not determined.
Evidence · table
“1.26”
Context: 37.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Resource Estimates (2)
indicatedGolden Summit · goldTonnes: 432000000Grade: 1.24Grade Unit: g/tContained Metal: 17.2Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- Alaska
- Ticker
- FVL
Resource scope
- Estimate type
- resource
- Resource group id
- resource:b8aded3b1d8b71fc939e
Resource Data
- Category
- indicated
- Tonnes
- 432000000
- Grade
- 1.24
- Grade Unit
- g/t
- Contained Metal
- 17.2
- Contained Unit
- moz
- Cutoff Grade
- 0.5
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2025-07-01
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-07-01T00:00:00.000Z
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Historical Indicated Mineral Resource provides context for the project's scale but has low novelty due to its age.
Positive factors
- Large contained metal (17.2 Moz) indicates significant project scale.
- Indicated category provides reasonable geological confidence.
- Cut-off grade is disclosed, allowing for comparability.
Negative factors
- Estimate is historical (effective date July 2025, announced May 2026), reducing its novelty.
- No QP/CP sign-off or reporting standards are explicitly stated for this historical estimate.
Evidence · text
“Indicated Primary Mineral Resource of 17.2 million ounces at 1.24 g/t Au (432 million tonnes) and an Inferred Primary Mineral Resource of 11.9 million ounces at 1.04 g/t Au (358 million tonnes), using a 0.5 g/t cut-off grade and a gold price of $2,490.”
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: the release names the study this estimate supports
DFS-Supportingneutral
Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.
Why it applies: the release names the study this estimate supports
inferredGolden Summit · goldTonnes: 358000000Grade: 1.04Grade Unit: g/tContained Metal: 11.9Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- Alaska
- Ticker
- FVL
Resource scope
- Estimate type
- resource
- Resource group id
- resource:a817470841f52a078d4f
Resource Data
- Category
- inferred
- Tonnes
- 358000000
- Grade
- 1.04
- Grade Unit
- g/t
- Contained Metal
- 11.9
- Contained Unit
- moz
- Cutoff Grade
- 0.5
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2025-07-01
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-07-01T00:00:00.000Z
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: Historical Inferred Mineral Resource provides context for the project's potential but has low novelty and lower confidence due to its category.
Positive factors
- Large contained metal (11.9 Moz) indicates significant project potential.
- Cut-off grade is disclosed, allowing for comparability.
Negative factors
- Estimate is historical (effective date July 2025, announced May 2026), reducing its novelty.
- Inferred category has lower geological confidence and cannot support economic studies alone.
- No QP/CP sign-off or reporting standards are explicitly stated for this historical estimate.
Evidence · text
“Indicated Primary Mineral Resource of 17.2 million ounces at 1.24 g/t Au (432 million tonnes) and an Inferred Primary Mineral Resource of 11.9 million ounces at 1.04 g/t Au (358 million tonnes), using a 0.5 g/t cut-off grade and a gold price of $2,490.”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: the release names the study this estimate supports
DFS-Supportingneutral
Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.
Why it applies: the release names the study this estimate supports
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.