Gold Springs Resource Continues to Expand Gold Mineralization at the Charlie Ross Resource
Original announcement by tmx on
- Company
- Gold Springs Resource Corp.
- Ticker
- GRC
- Exchange
- TSX
- Region
- USA, on the border of Nevada and Utah
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results
- Extracted
- 2026-09-16 03:27:39 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Gold Springs Resource Corp. announced initial assay results from its 2022 drill program at the Charlie Ross Resource within its Gold Springs project in Nevada and Utah, USA. The program successfully extended gold mineralization into the western zone of the system, with notable intercepts including 1.20 g/t gold equivalent over 10.7 meters in hole CR-22-001 and 2.09 g/t gold equivalent over 3.0 meters in hole CR-22-003. The company plans further drilling to test extensions and new targets.
Reasoning: The initial 2022 drill results at Charlie Ross successfully extended gold mineralization with several high-grade gold equivalent intercepts, indicating positive exploration progress. The results are supported by robust QA/QC and QP sign-off, though the lack of precise true width and cut-off grade information introduces minor uncertainty.
Positive factors
- Extension of gold mineralization into new zones
- Several strong gold equivalent intercepts reported
- Comprehensive QA/QC procedures disclosed and QP signed off
Negative factors
- True width is only estimated as a range, not a precise value
- Cut-off grade for reported intervals is not disclosed
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 31
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The company states they have 'successfully extended the gold mineralization into the western zone of the system' and are looking for 'extensions on the central and eastern zones'.
Evidence · text
“successfully extended the gold mineralization into the western zone of the system. We have already drilled 12 additional holes to continue to test this western zone and to look for extensions on the central and eastern zones of this 2022 discovery.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a 'Quality Assurance and Quality Control' section detailing the submission of standards, blanks, and duplicates, and mentions ALS Geochemical as an ISO 9001:2000 certified laboratory, with a Qualified Person signing off.
Evidence · text
“Quality Assurance and Quality Control Approximately 7 kg of RC chips were sent to the laboratory for each 1.52 meters drill interval. Standards and blanks are submitted into the sample stream at the rate of 15% for QA/QC purposes. In addition, the laboratory also includes duplicates of samples, standards and blanks. The results of these check assays are reviewed prior to the release of data. All RC sample assays are also reviewed for their geological context and checked against the drill logs. Assay Method Assays were performed in Reno, Nevada by ALS Geochemical, an ISO 9001:2000 certified and independent laboratory. Gold was analyzed by fire assay of a 30-gram sample with an AAS finish with samples assaying greater than 5 g/t re-assayed using a 30-gram sample and a gravity finish. Silver is analyzed by a four-acid leach ICP method.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document states that 'True thickness is estimated to be 60-100% of reported length', indicating that the reported intercept lengths are downhole (apparent) widths and not precise true widths.
Evidence · text
“True thickness is estimated to be 60-100% of reported length.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document reports drill intercepts with grades and lengths but does not state the cut-off grade used for compositing these intervals.
Evidence · text
“Summary of drill intercepts :”
Extracted facts
Stored fact records: 31. Some facts used in scoring do not have a stored record.
Drill Results (31)
CR-22-001Gold Springs · goldGrade: 1.05Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-001
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 132.6 m
- To
- 143.3 m
- Hole Depth
- 231.6 m
- Intercept Depth
- 132.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-001:132.6-143.3
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758628
- Northing
- 4199326
- CRS
- UTM NAD 27
- Elevation
- 2117 m
- Azimuth
- 270 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows good gold equivalent mineralization over a moderate width, contributing to the expansion of the Charlie Ross resource. The grade is strong for an epithermal deposit.
Positive factors
- Good gold equivalent grade over a moderate width
- Intercept contributes to expanding mineralization at Charlie Ross
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“1.05”
Context: 10.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-001Gold Springs · goldGrade: 0.68Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-001
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 190.5 m
- To
- 204.2 m
- Hole Depth
- 231.6 m
- Intercept Depth
- 132.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-001:190.5-204.2
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758628
- Northing
- 4199326
- CRS
- UTM NAD 27
- Elevation
- 2117 m
- Azimuth
- 270 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a good width, further supporting the expansion of the Charlie Ross resource. The grade is moderate for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a good width
- Intercept contributes to expanding mineralization at Charlie Ross
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.68”
Context: 13.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-002Gold Springs · goldGrade: 0.47Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 47.2 m
- To
- 51.8 m
- Hole Depth
- 173.7 m
- Intercept Depth
- 47.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-002:47.2-51.8
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758609
- Northing
- 4199318
- CRS
- UTM NAD 27
- Elevation
- 2119 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a narrow width, contributing to the overall understanding of the Charlie Ross resource. The grade is weak for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a narrow width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.47”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-002Gold Springs · goldGrade: 0.7Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Hole Depth
- 173.7 m
- Intercept Depth
- 47.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-002:59.4-64
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758609
- Northing
- 4199318
- CRS
- UTM NAD 27
- Elevation
- 2119 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a narrow width, contributing to the overall understanding of the Charlie Ross resource. The grade is moderate for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a narrow width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.70”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-002Gold Springs · goldGrade: 0.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 100.6 m
- To
- 103.6 m
- Hole Depth
- 173.7 m
- Intercept Depth
- 47.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-002:100.6-103.6
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758609
- Northing
- 4199318
- CRS
- UTM NAD 27
- Elevation
- 2119 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.78
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a narrow width, contributing to the overall understanding of the Charlie Ross resource. The grade is moderate for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a narrow width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.53”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-002Gold Springs · goldGrade: 0.63Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 170.7 m
- To
- 173.7 m
- Hole Depth
- 173.7 m
- Intercept Depth
- 47.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-002:170.7-173.7
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758609
- Northing
- 4199318
- CRS
- UTM NAD 27
- Elevation
- 2119 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.64
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a narrow width, contributing to the overall understanding of the Charlie Ross resource. The grade is weak for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a narrow width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.63”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-003Gold Springs · goldGrade: 1.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 42.7 m
- To
- 45.7 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-003:42.7-45.7
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758596
- Northing
- 4199348
- CRS
- UTM NAD 27
- Elevation
- 2107 m
- Azimuth
- 270 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.09
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows a high gold equivalent grade over a narrow width, representing a strong result for the Charlie Ross resource. The grade is strong for an epithermal deposit.
Positive factors
- High gold equivalent grade over a narrow width
- Intercept contributes to expanding mineralization at Charlie Ross
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“1.20”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-003Gold Springs · goldGrade: 0.48Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 61 m
- To
- 67.1 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-003:61-67.1
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758596
- Northing
- 4199348
- CRS
- UTM NAD 27
- Elevation
- 2107 m
- Azimuth
- 270 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a narrow width, contributing to the overall understanding of the Charlie Ross resource. The grade is weak for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a narrow width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.48”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-003Gold Springs · goldGrade: 0.88Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 83.8 m
- To
- 93 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-003:83.8-93
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758596
- Northing
- 4199348
- CRS
- UTM NAD 27
- Elevation
- 2107 m
- Azimuth
- 270 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.96
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a good width, further supporting the expansion of the Charlie Ross resource. The grade is moderate for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a good width
- Intercept contributes to expanding mineralization at Charlie Ross
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.88”
Context: 9.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-003Gold Springs · goldGrade: 0.38Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 118.9 m
- To
- 126.5 m
- Hole Depth
- 213.4 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-003:118.9-126.5
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758596
- Northing
- 4199348
- CRS
- UTM NAD 27
- Elevation
- 2107 m
- Azimuth
- 270 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows weak gold equivalent mineralization over a moderate width, contributing to the overall understanding of the Charlie Ross resource. The grade is weak for an epithermal deposit.
Positive factors
- Weak gold equivalent grade over a moderate width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.38”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-006Gold Springs · goldGrade: 0.55Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-006
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 56.4 m
- To
- 64 m
- Hole Depth
- 274.3 m
- Intercept Depth
- 56.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CR-22-006:56.4-64
- Mining Method
- underground
Location
- Location
- Charlie Ross
- Easting
- 758730
- Northing
- 4199695
- CRS
- UTM NAD 27
- Elevation
- 2188 m
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold equivalent mineralization over a moderate width, contributing to the overall understanding of the Charlie Ross resource. The grade is weak for an epithermal deposit.
Positive factors
- Moderate gold equivalent grade over a moderate width
Negative factors
- True width is estimated as a range (60-100%)
- Cut-off grade for compositing is not disclosed
Evidence · table
“0.55”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
J-22-005Gold Springs · goldGrade: 3.73Grade Unit: g/tIntercept: 9.2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- J-22-005
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 3.73
- Grade Unit
- g/t
- Intercept
- 9.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Mining Method
- underground
Location
- Location
- North Jumbo
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.73
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-09-19T00:00:00.000Z
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This historical sub-interval from North Jumbo shows very high-grade gold equivalent mineralization, indicating a bonanza zone within the broader intercept. While strong, it is not new information.
Positive factors
- Very high gold equivalent grade over a good width, indicating a bonanza zone
- Supports southern extension of North Jumbo resource
Negative factors
- This is a previously reported result, not new information in this release
- True width is not stated
- Cut-off grade for compositing is not disclosed
Evidence · text
“3.73 g/t over 9.2 meters”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
SN-22-002Gold Springs · goldGrade: 0.7Grade Unit: g/tIntercept: 27.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- SN-22-002
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 27.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Mining Method
- underground
Location
- Location
- Snow target
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-09-22T00:00:00.000Z
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: This historical intercept from the Snow target shows moderate gold equivalent mineralization over a significant width, indicating potential for this new discovery. While strong, it is not new information.
Positive factors
- Moderate gold equivalent grade over a significant width
- Supports potential of the new Snow target discovery
Negative factors
- This is a previously reported result, not new information in this release
- True width is not stated
- Cut-off grade for compositing is not disclosed
Evidence · text
“0.70 g/t over 27.4 meters”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CR-22-001Gold Springs · silverGrade: 20.9Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-001
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 20.9
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 132.6 m
- To
- 143.3 m
- Intercept Depth
- 132.6 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- CR-22-001:132.6-143.3
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 20.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 223.6 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.9”
Context: CR-22-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.68Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 190.5 m
- To
- 204.2 m
- Intercept Depth
- 190.5 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:190.5-204.2
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.68 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 9.3 g/t·m is below.
Negative factors
- 0.68 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.68”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 2.8Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 190.5 m
- To
- 204.2 m
- Intercept Depth
- 190.5 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:190.5-204.2
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 2.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 38.4 g/t·m is below.
Negative factors
- 2.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-002Gold Springs · silverGrade: 27.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 27.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 47.2 m
- To
- 51.8 m
- Intercept Depth
- 47.2 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- CR-22-002:47.2-51.8
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 27.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 126.5 g/t·m is below.
Negative factors
- 27.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.5”
Context: CR-22-002
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.7Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Intercept Depth
- 59.4 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:59.4-64
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 3.2 g/t·m is below.
Negative factors
- 0.7 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 10.6Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 10.6
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Intercept Depth
- 59.4 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:59.4-64
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 10.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 48.8 g/t·m is below.
Negative factors
- 10.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 100.6 m
- To
- 103.6 m
- Intercept Depth
- 100.6 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:100.6-103.6
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.78
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 0.53 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 35.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 35.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 100.6 m
- To
- 103.6 m
- Intercept Depth
- 100.6 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:100.6-103.6
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.78
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 35.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 106.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.63Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 170.7 m
- To
- 173.7 m
- Intercept Depth
- 170.7 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:170.7-173.7
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.64
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.63 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.9 g/t·m is below.
Negative factors
- 0.63 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.63”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 1.65Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.65
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 170.7 m
- To
- 173.7 m
- Intercept Depth
- 170.7 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:170.7-173.7
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.64
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 1.65 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.9 g/t·m is below.
Negative factors
- 1.65 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-003Gold Springs · silverGrade: 128.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 128.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 42.7 m
- To
- 45.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- CR-22-003:42.7-45.7
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.09
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 128.45 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 385.3 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“128.45”
Context: CR-22-003
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.48Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 61 m
- To
- 67.1 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:61-67.1
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.48 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.9 g/t·m is below.
Negative factors
- 0.48 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.48”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 11.08Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 11.08
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 61 m
- To
- 67.1 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:61-67.1
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 11.08 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 67.6 g/t·m is below.
Negative factors
- 11.08 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.88Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 83.8 m
- To
- 93 m
- Intercept Depth
- 83.8 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:83.8-93
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.96
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.88 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 8.1 g/t·m is below.
Negative factors
- 0.88 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 12.02Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 12.02
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 83.8 m
- To
- 93 m
- Intercept Depth
- 83.8 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:83.8-93
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.96
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 12.02 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 110.6 g/t·m is below.
Negative factors
- 12.02 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.38Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 118.9 m
- To
- 126.5 m
- Intercept Depth
- 118.9 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:118.9-126.5
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.9 g/t·m is below.
Negative factors
- 0.38 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 15.88Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 15.88
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 118.9 m
- To
- 126.5 m
- Intercept Depth
- 118.9 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- and:118.9-126.5
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 15.88 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 120.7 g/t·m is below.
Negative factors
- 15.88 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-006Gold Springs · silverGrade: 1.94Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-006
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.94
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 56.4 m
- To
- 64 m
- Intercept Depth
- 56.4 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- CR-22-006:56.4-64
- Mining Method
- underground
Location
- CRS
- UTM NAD 27
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2022-09-29T00:00:00.000Z
Reasoning: Expanded from assay table. 1.94 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.7 g/t·m is below.
Negative factors
- 1.94 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.94”
Context: CR-22-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.