Gold Springs Resource Continues to Expand the Charlie Ross Deposit
Original announcement by tmx on
- Company
- Gold Springs Resource Corp.
- Ticker
- GRC
- Exchange
- TSX
- Region
- USA, on the border of Nevada and Utah
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-16 03:29:28 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Gold Springs Resource Corp. announced positive drill results from the Charlie Ross deposit within its Gold Springs project in the USA. The new intercepts, including 9.49 g/t gold equivalent over 3.0 meters, confirm and extend high-grade gold mineralization across three parallel zones. The company also provided an update on its historical Charlie Ross resource estimate from June 2022, which does not yet include these latest drilling results.
Reasoning: The document reports new drill results with several high-grade gold equivalent intercepts that extend known mineralization at the Charlie Ross deposit, supported by robust QA/QC. However, the resource estimate presented is historical and does not incorporate these new results, limiting the immediate impact on the resource base.
Positive factors
- High-grade gold equivalent intercepts reported, including 9.49 g/t AuEq over 3.0 meters and 7.74 g/t AuEq over 4.6 meters.
- Drilling successfully extends mineralization in three parallel zones (West, Central, East) at the Charlie Ross deposit.
- Robust QA/QC procedures are disclosed, including certified laboratory, QP sign-off, and use of blanks, standards, and duplicates.
- The company explicitly states the assumptions used for gold equivalent calculations.
Negative factors
- True width is estimated to be 60-100% of reported length, but not precisely stated for individual intercepts.
- The resource estimate presented in the document is historical (June 2022) and does not incorporate the new drill results.
Facts used in scoring: 70
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated 'Quality Assurance and Quality Control' section detailing the use of standards, blanks, duplicates, and a certified laboratory (ALS Geochemical, ISO 9001:2000).
Evidence · text
“Quality Assurance and Quality Control Approximately 7 kg of RC chips were sent to the laboratory for each 1.52 meters drill interval. Standards and blanks are submitted into the sample stream at the rate of 15% for QA/QC purposes. In addition, the laboratory also includes duplicates of samples, standards and blanks. The results of these check assays are reviewed prior to the release of data. All RC sample assays are also reviewed for their geological context and checked against the drill logs. Assay Method Assays were performed in Reno, Nevada by ALS Geochemical, an ISO 9001:2000 certified and independent laboratory.”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Randall Moore, VP of Gold Springs Resource Corp., is explicitly named as the Qualified Person responsible for approving and verifying the scientific and technical information in this news release.
Evidence · text
“Randall Moore, VP of Gold Springs Resource Corp., is the Company's designated Qualified Person for this news release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects. He has approved the scientific or technical information in this release and has verified the data disclosed in this release for its geological reasonableness, checked all the inputs and verified the analytical data through an analysis of the blanks and standards submitted with the drill-chip samples.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: The document explicitly states the assumptions for gold equivalent calculations (US$1,800/oz gold, US$25/oz silver and 50% for silver recovery).
Evidence · text
“Gold equivalent based on US$1,800/oz gold, US$25/oz silver and 50% for silver recovery.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document states that 'True thickness is estimated to be 60-100% of reported length' but does not provide specific true width values for individual intercepts.
Evidence · text
“True thickness is estimated to be 60-100% of reported length.”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: The resource estimate table presented in the document is explicitly stated as 'Charlie Ross Resource based on drilling to 2021 and without results from 2022-2023' with an effective date of June 13, 2022, indicating it is a re-release of historical data.
Evidence · text
“Charlie Ross Resource based on drilling to 2021 and without results from 2022-2023 "Mineral Resource Estimate NI 43-101 Technical Report - Gold Springs Project, Utah-Nevada, USA" dated July 11, 2022, with an effective date of June 13, 2022”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource estimate is explicitly stated to be from an 'NI 43-101 Technical Report'.
Evidence · text
“"Mineral Resource Estimate NI 43-101 Technical Report - Gold Springs Project, Utah-Nevada, USA" dated July 11, 2022, with an effective date of June 13, 2022”
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: A portion of the reported resource for Charlie Ross is classified as 'Inferred'.
Evidence · table
“Inferred”
Context: 1,122
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: A portion of the reported resource for Charlie Ross is classified as 'Indicated'.
Evidence · table
“Indicated”
Context: 4,943
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: The resource estimate clearly states a '0.25 g/t gold cutoff'.
Evidence · text
“0.25 g/t gold cutoff”
Extracted facts
Stored fact records: 70. Some facts used in scoring do not have a stored record.
Drill Results (68)
CR-22-019Gold Springs · goldGrade: 3.23Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-019
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 3.23
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 91.4 m
- To
- 96 m
- Hole Depth
- 219.4 m
- Intercept Depth
- 73.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-22-019:91.4-96
Location
- Location
- Charlie Ross
- Easting
- 758594
- Northing
- 4199600
- CRS
- UTM NAD 27 Z11
- Elevation
- 2154 m
- Azimuth
- 270 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 3.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, significantly contributing to the deposit's known mineralization, with transparent metal equivalent calculations.
Positive factors
- Gold grade (3.23 g/t) is significantly above the project's average gold grade (1.004 g/t).
- Metal equivalent assumptions are disclosed, enhancing transparency.
Negative factors
- Intercept length (4.6 m) is below the project's average intercept length (6.5 m).
- True width is estimated to be 60-100% of reported length, but not precisely stated.
Evidence · table
“3.23”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-019Gold Springs · silverGrade: 27.2Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-019
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 27.2
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 91.4 m
- To
- 96 m
- Hole Depth
- 219.4 m
- Intercept Depth
- 73.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CR-22-019:91.4-96
Location
- Location
- Charlie Ross
- Easting
- 758594
- Northing
- 4199600
- CRS
- UTM NAD 27 Z11
- Elevation
- 2154 m
- Azimuth
- 270 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemical
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 3.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a moderate width, significantly contributing to the deposit's known mineralization, with transparent metal equivalent calculations.
Positive factors
- Silver grade (27.2 g/t) is significantly above the project's average silver grade (11.448 g/t).
- Metal equivalent assumptions are disclosed, enhancing transparency.
Negative factors
- Intercept length (4.6 m) is below the project's average intercept length (6.5 m).
- True width is estimated to be 60-100% of reported length, but not precisely stated.
Evidence · table
“27.2”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-001Gold Springs · goldGrade: 1.05Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-001
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 132.6 m
- To
- 143.3 m
- Intercept Depth
- 132.6 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-001:132.6-143.3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.05 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 11.2 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.05”
Context: CR-22-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-001Gold Springs · silverGrade: 20.9Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-001
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 20.9
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 132.6 m
- To
- 143.3 m
- Intercept Depth
- 132.6 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-001:132.6-143.3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 20.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 223.6 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.9”
Context: CR-22-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.68Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 190.5 m
- To
- 204.2 m
- Intercept Depth
- 190.5 m
Classification
- Sample Type
- drill
- Group ID
- and:190.5-204.2
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.68 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 9.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.68”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 2.8Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 190.5 m
- To
- 204.2 m
- Intercept Depth
- 190.5 m
Classification
- Sample Type
- drill
- Group ID
- and:190.5-204.2
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 38.4 g/t·m is below.
Negative factors
- 2.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-002Gold Springs · goldGrade: 0.47Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 47.2 m
- To
- 51.8 m
- Intercept Depth
- 47.2 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-002:47.2-51.8
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.47 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.47”
Context: CR-22-002
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-002Gold Springs · silverGrade: 27.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-002
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 27.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 47.2 m
- To
- 51.8 m
- Intercept Depth
- 47.2 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-002:47.2-51.8
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 27.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 126.5 g/t·m is below.
Negative factors
- 27.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.5”
Context: CR-22-002
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.7Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Intercept Depth
- 59.4 m
Classification
- Sample Type
- drill
- Group ID
- and:59.4-64
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 10.6Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 10.6
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 59.4 m
- To
- 64 m
- Intercept Depth
- 59.4 m
Classification
- Sample Type
- drill
- Group ID
- and:59.4-64
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 10.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 48.8 g/t·m is below.
Negative factors
- 10.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 100.6 m
- To
- 103.6 m
- Intercept Depth
- 100.6 m
Classification
- Sample Type
- drill
- Group ID
- and:100.6-103.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.78
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 35.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 35.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 100.6 m
- To
- 103.6 m
- Intercept Depth
- 100.6 m
Classification
- Sample Type
- drill
- Group ID
- and:100.6-103.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.78
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 35.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 106.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.63Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 170.7 m
- To
- 173.7 m
- Intercept Depth
- 170.7 m
Classification
- Sample Type
- drill
- Group ID
- and:170.7-173.7
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.64
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.63 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.63”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 1.65Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.65
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 170.7 m
- To
- 173.7 m
- Intercept Depth
- 170.7 m
Classification
- Sample Type
- drill
- Group ID
- and:170.7-173.7
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.64
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.65 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.9 g/t·m is below.
Negative factors
- 1.65 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-003Gold Springs · goldGrade: 1.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 42.7 m
- To
- 45.7 m
- Intercept Depth
- 42.7 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-003:42.7-45.7
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.09
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.2 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.20”
Context: CR-22-003
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-003Gold Springs · silverGrade: 128.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-003
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 128.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 42.7 m
- To
- 45.7 m
- Intercept Depth
- 42.7 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-003:42.7-45.7
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.09
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 128.45 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 385.3 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“128.45”
Context: CR-22-003
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.48Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 61 m
- To
- 67.1 m
- Intercept Depth
- 61 m
Classification
- Sample Type
- drill
- Group ID
- and:61-67.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.48 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.48”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 11.08Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 11.08
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 61 m
- To
- 67.1 m
- Intercept Depth
- 61 m
Classification
- Sample Type
- drill
- Group ID
- and:61-67.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 11.08 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 67.6 g/t·m is below.
Negative factors
- 11.08 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.88Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 83.8 m
- To
- 93 m
- Intercept Depth
- 83.8 m
Classification
- Sample Type
- drill
- Group ID
- and:83.8-93
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.96
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.88 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 8.1 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 12.02Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 12.02
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 83.8 m
- To
- 93 m
- Intercept Depth
- 83.8 m
Classification
- Sample Type
- drill
- Group ID
- and:83.8-93
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.96
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 12.02 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 110.6 g/t·m is below.
Negative factors
- 12.02 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.38Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 118.9 m
- To
- 126.5 m
- Intercept Depth
- 118.9 m
Classification
- Sample Type
- drill
- Group ID
- and:118.9-126.5
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 15.88Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 15.88
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 118.9 m
- To
- 126.5 m
- Intercept Depth
- 118.9 m
Classification
- Sample Type
- drill
- Group ID
- and:118.9-126.5
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 15.88 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 120.7 g/t·m is below.
Negative factors
- 15.88 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-006Gold Springs · goldGrade: 0.55Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-006
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 56.4 m
- To
- 64 m
- Intercept Depth
- 56.4 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-006:56.4-64
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: CR-22-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-006Gold Springs · silverGrade: 1.94Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-006
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.94
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 56.4 m
- To
- 64 m
- Intercept Depth
- 56.4 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-006:56.4-64
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.94 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.7 g/t·m is below.
Negative factors
- 1.94 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.94”
Context: CR-22-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-008Gold Springs · goldGrade: 2.31Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-008
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.31
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-008:3-6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.31 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.31 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.31”
Context: CR-22-008
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-008Gold Springs · silverGrade: 2.9Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-008
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-008:3-6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.7 g/t·m is below.
Negative factors
- 2.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.9”
Context: CR-22-008
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.84Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 228.6 m
- To
- 231.6 m
- Intercept Depth
- 228.6 m
Classification
- Sample Type
- drill
- Group ID
- and:228.6-231.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.02
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.84 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.84”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 25.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 25.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 228.6 m
- To
- 231.6 m
- Intercept Depth
- 228.6 m
Classification
- Sample Type
- drill
- Group ID
- and:228.6-231.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.02
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 25.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 77.1 g/t·m is below.
Negative factors
- 25.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“25.7”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-009Gold Springs · goldGrade: 1.1Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-009
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 105.2 m
- To
- 115.8 m
- Intercept Depth
- 105.2 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-009:105.2-115.8
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.31
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.1 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 11.7 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.10”
Context: CR-22-009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-009Gold Springs · silverGrade: 29.8Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-009
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 29.8
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 105.2 m
- To
- 115.8 m
- Intercept Depth
- 105.2 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-009:105.2-115.8
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.31
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 29.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 315.9 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“29.8”
Context: CR-22-009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.59Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 195.1 m
- To
- 201.2 m
- Intercept Depth
- 195.1 m
Classification
- Sample Type
- drill
- Group ID
- and:195.1-201.2
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.59 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.59”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 2.9Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 195.1 m
- To
- 201.2 m
- Intercept Depth
- 195.1 m
Classification
- Sample Type
- drill
- Group ID
- and:195.1-201.2
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 17.7 g/t·m is below.
Negative factors
- 2.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-010Gold Springs · goldGrade: 2.53Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- CR-22-010
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.53
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 160 m
- To
- 172.2 m
- Intercept Depth
- 160 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-010:160-172.2
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.64
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.53 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 30.9 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 2.53 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.53”
Context: CR-22-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-010Gold Springs · silverGrade: 16.4Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- CR-22-010
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 16.4
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 160 m
- To
- 172.2 m
- Intercept Depth
- 160 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-010:160-172.2
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.64
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 16.4 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 200.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.4”
Context: CR-22-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inc.Gold Springs · goldGrade: 9.19Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- inc.
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 9.19
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 164.6 m
- To
- 167.6 m
- Intercept Depth
- 164.6 m
Classification
- Sample Type
- drill
- Group ID
- inc.:164.6-167.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 9.49
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 9.19 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 27.6 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 9.19 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.19”
Context: inc.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inc.Gold Springs · silverGrade: 43Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- inc.
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 43
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 164.6 m
- To
- 167.6 m
- Intercept Depth
- 164.6 m
Classification
- Sample Type
- drill
- Group ID
- inc.:164.6-167.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 9.49
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 43 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 129.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“43.0”
Context: inc.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.66Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 192 m
- To
- 198.1 m
- Intercept Depth
- 192 m
Classification
- Sample Type
- drill
- Group ID
- and:192-198.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.72
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.66 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.66”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 8.3Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 8.3
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 192 m
- To
- 198.1 m
- Intercept Depth
- 192 m
Classification
- Sample Type
- drill
- Group ID
- and:192-198.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.72
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 8.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 50.6 g/t·m is below.
Negative factors
- 8.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.3”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.39Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 210.3 m
- To
- 216.4 m
- Intercept Depth
- 210.3 m
Classification
- Sample Type
- drill
- Group ID
- and:210.3-216.4
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.39 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.39”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 7.25Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 7.25
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 210.3 m
- To
- 216.4 m
- Intercept Depth
- 210.3 m
Classification
- Sample Type
- drill
- Group ID
- and:210.3-216.4
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 7.25 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 44.2 g/t·m is below.
Negative factors
- 7.25 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.25”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-011Gold Springs · goldGrade: 0.35Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CR-22-011
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 53.3 m
- To
- 59.4 m
- Intercept Depth
- 53.3 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-011:53.3-59.4
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.1 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: CR-22-011
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-011Gold Springs · silverGrade: 2.7Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CR-22-011
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 53.3 m
- To
- 59.4 m
- Intercept Depth
- 53.3 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-011:53.3-59.4
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 16.5 g/t·m is below.
Negative factors
- 2.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.7”
Context: CR-22-011
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-012Gold Springs · goldGrade: 0.71Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-012
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 150.9 m
- To
- 158.5 m
- Intercept Depth
- 150.9 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-012:150.9-158.5
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.81
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.71 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 5.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.71”
Context: CR-22-012
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-012Gold Springs · silverGrade: 15Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CR-22-012
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 15
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 150.9 m
- To
- 158.5 m
- Intercept Depth
- 150.9 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-012:150.9-158.5
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.81
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 15 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 114.0 g/t·m is below.
Negative factors
- 15 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15”
Context: CR-22-012
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-019Gold Springs · goldGrade: 0.37Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-019
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 211.8 m
- To
- 219.5 m
- Intercept Depth
- 211.8 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-019:211.8-219.5
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-019Gold Springs · silverGrade: 5.4Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- CR-22-019
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 5.4
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 211.8 m
- To
- 219.5 m
- Intercept Depth
- 211.8 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-019:211.8-219.5
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 5.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 41.6 g/t·m is below.
Negative factors
- 5.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.4”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-014Gold Springs · goldGrade: 2.83Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- CR-22-014
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.83
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 106.7 m
- To
- 118.9 m
- Intercept Depth
- 106.7 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-014:106.7-118.9
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.1
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.83 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 34.5 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 2.83 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.83”
Context: CR-22-014
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-014Gold Springs · silverGrade: 39.6Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- CR-22-014
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 39.6
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 106.7 m
- To
- 118.9 m
- Intercept Depth
- 106.7 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-014:106.7-118.9
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.1
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 39.6 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 483.1 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“39.6”
Context: CR-22-014
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inc.Gold Springs · goldGrade: 7.16Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- inc.
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 7.16
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 106.7 m
- To
- 111.3 m
- Intercept Depth
- 106.7 m
Classification
- Sample Type
- drill
- Group ID
- inc.:106.7-111.3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.74
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 7.16 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 32.9 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 7.16 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.16”
Context: inc.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inc.Gold Springs · silverGrade: 83.8Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- inc.
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 83.8
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 106.7 m
- To
- 111.3 m
- Intercept Depth
- 106.7 m
Classification
- Sample Type
- drill
- Group ID
- inc.:106.7-111.3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 7.74
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 83.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 385.5 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“83.8”
Context: inc.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.85Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 125 m
- To
- 128 m
- Intercept Depth
- 125 m
Classification
- Sample Type
- drill
- Group ID
- and:125-128
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.08
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.85 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.85”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 32.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 32.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 125 m
- To
- 128 m
- Intercept Depth
- 125 m
Classification
- Sample Type
- drill
- Group ID
- and:125-128
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.08
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 32.7 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 98.1 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“32.7”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 0.75Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 147.8 m
- To
- 153.9 m
- Intercept Depth
- 147.8 m
Classification
- Sample Type
- drill
- Group ID
- and:147.8-153.9
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.75 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.75”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 12.9Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 12.9
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 147.8 m
- To
- 153.9 m
- Intercept Depth
- 147.8 m
Classification
- Sample Type
- drill
- Group ID
- and:147.8-153.9
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 12.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 78.7 g/t·m is below.
Negative factors
- 12.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-015Gold Springs · goldGrade: 0.84Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-015
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 36.6 m
- To
- 39.6 m
- Intercept Depth
- 36.6 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-015:36.6-39.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.84 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.84”
Context: CR-22-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-015Gold Springs · silverGrade: 3.1Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CR-22-015
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 36.6 m
- To
- 39.6 m
- Intercept Depth
- 36.6 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-015:36.6-39.6
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 3.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.3 g/t·m is below.
Negative factors
- 3.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.1”
Context: CR-22-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 1.47Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.47
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 47.2 m
- To
- 50.3 m
- Intercept Depth
- 47.2 m
Classification
- Sample Type
- drill
- Group ID
- and:47.2-50.3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.6
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.47 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.47”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 18.9Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 18.9
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 47.2 m
- To
- 50.3 m
- Intercept Depth
- 47.2 m
Classification
- Sample Type
- drill
- Group ID
- and:47.2-50.3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.6
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 18.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 58.6 g/t·m is below.
Negative factors
- 18.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-016Gold Springs · goldGrade: 2.69Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- CR-22-016
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 2.69
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 1.5 m
- To
- 3 m
- Intercept Depth
- 1.5 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-016:1.5-3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.74
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 2.69 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.0 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.69 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.69”
Context: CR-22-016
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-016Gold Springs · silverGrade: 7Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- CR-22-016
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 7
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 1.5 m
- To
- 3 m
- Intercept Depth
- 1.5 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-016:1.5-3
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 2.74
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 10.5 g/t·m is below.
Negative factors
- 7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.0”
Context: CR-22-016
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 1.14Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 131.1 m
- To
- 134.1 m
- Intercept Depth
- 131.1 m
Classification
- Sample Type
- drill
- Group ID
- and:131.1-134.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.14 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.14”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 1.8Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 131.1 m
- To
- 134.1 m
- Intercept Depth
- 131.1 m
Classification
- Sample Type
- drill
- Group ID
- and:131.1-134.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.4 g/t·m is below.
Negative factors
- 1.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-019Gold Springs · goldGrade: 0.54Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- CR-22-019
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 73.2 m
- To
- 77.7 m
- Intercept Depth
- 73.2 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-019:73.2-77.7
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: CR-22-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CR-22-019Gold Springs · silverGrade: 22.6Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- CR-22-019
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 22.6
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 73.2 m
- To
- 77.7 m
- Intercept Depth
- 73.2 m
Classification
- Sample Type
- drill
- Group ID
- CR-22-019:73.2-77.7
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 22.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 101.7 g/t·m is below.
Negative factors
- 22.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“22.6”
Context: CR-22-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 1.57Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 1.57
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 88.4 m
- To
- 99.1 m
- Intercept Depth
- 88.4 m
Classification
- Sample Type
- drill
- Group ID
- and:88.4-99.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.85
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 1.57 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 16.8 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.57”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 19.8Grade Unit: g/tIntercept: 10.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 19.8
- Grade Unit
- g/t
- Intercept
- 10.7 m
- From
- 88.4 m
- To
- 99.1 m
- Intercept Depth
- 88.4 m
Classification
- Sample Type
- drill
- Group ID
- and:88.4-99.1
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 1.85
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 19.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 211.9 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · goldGrade: 3.23Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 3.23
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 91.4 m
- To
- 96 m
- Intercept Depth
- 91.4 m
Classification
- Sample Type
- drill
- Group ID
- and:91.4-96
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.61
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 3.23 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 14.9 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 3.23 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.23”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andGold Springs · silverGrade: 27.2Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GRC
Geometry
- Grade
- 27.2
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 91.4 m
- To
- 96 m
- Intercept Depth
- 91.4 m
Classification
- Sample Type
- drill
- Group ID
- and:91.4-96
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Metal Equivalent
- Metal Eq. Grade
- 3.61
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: Expanded from assay table. 27.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 125.1 g/t·m is below.
Negative factors
- 27.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.2”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Resource Estimates (2)
inferredGold Springs · goldTonnes: 1122Grade: 0.6Grade Unit: g/tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Gold Springs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- USA, on the border of Nevada and Utah
- Ticker
- GRC
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Randall Moore
- Resource group id
- resource:3a609e7da1078392c2cd
- Deposit or zone
- Charlie Ross
Resource Data
- Category
- inferred
- Tonnes
- 1122
- Grade
- 0.6
- Grade Unit
- g/t
- Cutoff Grade
- 0.25
- Cutoff Unit
- g/t gold
Prior Estimate
- Resource Date
- 2022-06-13
Metal Equivalent
- Assumptions Disclosed
- Yes
Lab
- Laboratory
- ALS Geochemical
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2022-06-13T00:00:00.000Z
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: This historical Inferred resource for Charlie Ross indicates potential but carries lower confidence due to its category and the fact that it does not include recent drilling. (Expanded from multi-commodity resource table for completeness.)
Positive factors
- The estimate is NI 43-101 compliant and signed off by a Qualified Person.
- Cut-off grade is disclosed, enhancing transparency.
Negative factors
- The resource is in the Inferred category, which is speculative and has limited geological confidence.
- This resource estimate is historical (June 2022) and does not reflect the latest drilling results.
Evidence · table
“0.60”
Context: 1,122
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
inferredGold Springs · silverTonnes: 1122Grade: 8.68Grade Unit: g/tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Gold Springs
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- USA, on the border of Nevada and Utah
- Ticker
- GRC
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Randall Moore
- Resource group id
- resource:3a609e7da1078392c2cd
- Deposit or zone
- Charlie Ross
Resource Data
- Category
- inferred
- Tonnes
- 1122
- Grade
- 8.68
- Grade Unit
- g/t
- Cutoff Grade
- 0.25
- Cutoff Unit
- g/t gold
Prior Estimate
- Resource Date
- 2022-06-13
Metal Equivalent
- Assumptions Disclosed
- Yes
Lab
- Laboratory
- ALS Geochemical
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2022-06-13T00:00:00.000Z
Dates
- Event date
- 2023-10-30T00:00:00.000Z
Reasoning: This historical Inferred resource for Charlie Ross indicates potential but carries lower confidence due to its category and the fact that it does not include recent drilling. (Expanded from multi-commodity resource table for completeness.)
Positive factors
- The estimate is NI 43-101 compliant and signed off by a Qualified Person.
- Cut-off grade is disclosed, enhancing transparency.
Negative factors
- The resource is in the Inferred category, which is speculative and has limited geological confidence.
- This resource estimate is historical (June 2022) and does not reflect the latest drilling results.
Evidence · table
“8.68”
Context: 1,122
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.