GoldQuest Extends High-Grade Polymetallic VMS Mineralization at Cachimbo Target, Dominican Republic
Original announcement by tmx on
- Company
- GoldQuest Mining Corp.
- Ticker
- GQC
- Exchange
- TSX
- Region
- Dominican Republic
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper, Zinc, Lead
- Document categories
- Drill results
- Extracted
- 2026-09-16 02:51:41 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
GoldQuest Mining Corp. announced new assay results from drill hole TIR-26-62 at its Cachimbo target in the Dominican Republic, extending high-grade polymetallic VMS mineralization. The drilling confirmed continuity of a newly identified high-grade level, intersecting 12.15 metres with significant gold, silver, copper, zinc, and lead values, including a sub-interval with exceptional zinc grades. The results indicate further potential along trend, particularly to the northwest, and will guide future drill targeting.
Reasoning: GoldQuest reported new assay results from drill hole TIR-26-62 at the Cachimbo target, confirming and extending high-grade polymetallic VMS mineralization. The intercept of 12.15 m @ 8.60 g/t Au, 128.2 g/t Ag, 0.77% Cu, 11.21% Zn, and 0.34% Pb, including a sub-interval of 3.35 m @ 9.95 g/t Au, 2.39% Cu, 120.7 g/t Ag, 35.85% Zn, and 0.56% Pb, demonstrates exceptional grades and continuity, opening potential along trend.
Positive factors
- High-grade polymetallic VMS mineralization confirmed and extended
- Significant gold, silver, copper, zinc, and lead grades, including exceptional zinc values
- Continuity of high-grade mineralized level supported by follow-up drilling
- Mineralization remains open along trend, particularly to the northwest, indicating further potential
- Detailed QA/QC procedures disclosed and QP sign-off provided
Negative factors
- Intervals may not represent true widths, and orientation is not yet determined
- Metal equivalent calculations did not utilize metal recoveries, reducing transparency
- Assays for a stringer zone below the main VMS level are still pending
- Compositing cut-off grades and internal dilution rules are not explicitly disclosed
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 35
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The sub-interval of 3.35 m @ 9.95 g/t Au, 2.39% Cu, 120.7 g/t Ag, 35.85% Zn, and 0.56% Pb includes exceptional zinc grades (35.85% Zn) well above the VMS exceptional threshold of 18%.
Evidence · text
“3.35 m @ 9.95 g/t Au, 120.7 g/t Ag, 2.39% Cu, 35.85% Zn and 0.56% Pb”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'Intervals may not represent true widths' and 'There is insufficient drilling to determine the exact orientation of the mineralized zones at this time'.
Evidence · text
“Intervals may not represent true widths. There is insufficient drilling to determine the exact orientation of the mineralized zones at this time.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The new result 'opens potential along trend, particularly toward the northwest, and supports further drill testing'.
Evidence · text
“Open Along Trend: The new result opens potential along trend, particularly toward the northwest, and supports further drill testing at Cachimbo and within the broader 7.5 km anomalous corridor.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated 'QA-QC' section detailing the use of Certified Standard Reference materials, insertion rates, sample preparation by ACME Labs, and assaying by Bureau Veritas Laboratories, along with methods like standards, blanks, and duplicates.
Evidence · text
“As part of the Company's Quality Assurance and Quality Control procedures (" QA/QC ") the Company reviews results from Certified Standard Reference materials (" CRSM " or " Standards "), which are inserted at a rate of five per 100 samples. Within the results disclosed herein there were no samples with results outside of the recommended tolerances for the Standards. In GoldQuest's drill programs, composite intervals were chosen using a combination of geological criteria and mineralization, averaging around two metres core length. The drill core is cut in half with one half of the core sample shipped to Bureau Veritas Labs by GoldQuest technicians. The remaining half of the core is kept at the Company core shack for future assay verification, or any other further investigation. Assays within intervals below the 0.005 g/t detection limit for Au were given a 0.0025 g/t value. All drill samples were prepared and screened by ACME Labs (Vancouver); metallic fire assay and multi-element ICP-MS were assayed by Bureau Veritas Laboratories (Vancouver). Gold values are determined by standard fire assay with an AA finish, or, if over 10.0 g/t Au, were re-assayed and completed with a gravimetric finish. Copper and zinc values exceeding 0.2% were re-assayed with a 4-acid digestion and AAS finish. When zinc values exceeded 10% a classic titration was carried out for zinc. QA/QC included the insertion and continual monitoring of numerous standards, blanks and duplicates into the sample stream, at random intervals within each batch.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: Metal equivalent grades are reported, but the document explicitly states 'No metal recoveries were utilized' in their calculation, which is a critical missing assumption.
Evidence · text
“AuEq was calculated by using metal prices of Au US$ 3,450/ounce, Cu US$ 5.1/pound, Ag US$ 37.4/ounce, Zn US$ 3,280/tonne and Pb US$ 1,920/tonne. No metal recoveries were utilized.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document states 'Interval grades are calculated using uncapped assays' but does not disclose the specific cut-off grade or internal dilution rules used for compositing the reported intervals.
Evidence · text
“Interval grades are calculated using uncapped assays.”
Extracted facts
Stored fact records: 35. Some facts used in scoring do not have a stored record.
Drill Results (35)
TIR-26-62Cachimbo target · goldGrade: 2.97Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 2.97
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 112.9 m
- To
- 115 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:112.9-115
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.35
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the polymetallic nature of the system but less significant than other reported intervals.
Positive factors
- Moderate gold grade for VMS deposit
- Polymetallic intercept
Negative factors
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“2.97”
Context: 2.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · copperGrade: 0.02Grade Unit: %Intercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.1 m
- From
- 112.9 m
- To
- 115 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:112.9-115
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.35
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: The copper grade in this narrow intercept is very low, contributing minimally to the overall polymetallic value.
Positive factors
- Polymetallic intercept
Negative factors
- Very low copper grade
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.02”
Context: 2.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · silverGrade: 26.9Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 26.9
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 112.9 m
- To
- 115 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:112.9-115
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.35
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: The silver grade is weak over a narrow interval, contributing to the polymetallic nature but not a highlight.
Positive factors
- Polymetallic intercept
Negative factors
- Weak silver grade
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“26.9”
Context: 2.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · leadGrade: 0.09Grade Unit: %Intercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.1 m
- From
- 112.9 m
- To
- 115 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:112.9-115
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.35
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: The lead grade is very low in this narrow intercept, contributing minimally to the overall polymetallic value.
Positive factors
- Polymetallic intercept
Negative factors
- Very low lead grade
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.09”
Context: 2.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · zincGrade: 0.17Grade Unit: %Intercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 2.1 m
- From
- 112.9 m
- To
- 115 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:112.9-115
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.35
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: The zinc grade is very low in this narrow intercept, contributing minimally to the overall polymetallic value.
Positive factors
- Polymetallic intercept
Negative factors
- Very low zinc grade
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.17”
Context: 2.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · goldGrade: 8.6Grade Unit: g/tIntercept: 12.15 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 8.6
- Grade Unit
- g/t
- Intercept
- 12.15 m
- From
- 277.35 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 14.14
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This intercept shows exceptional gold grades over a significant width, forming part of a high-grade polymetallic zone that confirms continuity of the VMS level.
Positive factors
- Exceptional gold grade
- Significant intercept width
- High-grade polymetallic mineralization
- Confirms continuity of VMS level
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“8.60”
Context: 12.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · copperGrade: 0.77Grade Unit: %Intercept: 12.15 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.77
- Grade Unit
- %
- Intercept
- 12.15 m
- From
- 277.35 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 14.14
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade over a significant width, contributing positively to the overall high-grade polymetallic VMS mineralization.
Positive factors
- Moderate copper grade for VMS deposit
- Significant intercept width
- Part of high-grade polymetallic mineralization
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.77”
Context: 12.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · silverGrade: 128.2Grade Unit: g/tIntercept: 12.15 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 128.2
- Grade Unit
- g/t
- Intercept
- 12.15 m
- From
- 277.35 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 14.14
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a significant width, contributing positively to the overall high-grade polymetallic VMS mineralization.
Positive factors
- Moderate silver grade
- Significant intercept width
- Part of high-grade polymetallic mineralization
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“128.2”
Context: 12.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · leadGrade: 0.34Grade Unit: %Intercept: 12.15 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 12.15 m
- From
- 277.35 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 14.14
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This intercept shows a weak lead grade over a significant width, contributing to the polymetallic nature but not a primary driver of value.
Positive factors
- Part of high-grade polymetallic mineralization
- Significant intercept width
Negative factors
- Weak lead grade
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.34”
Context: 12.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · zincGrade: 11.21Grade Unit: %Intercept: 12.15 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 11.21
- Grade Unit
- %
- Intercept
- 12.15 m
- From
- 277.35 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 14.14
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This intercept shows strong zinc grades over a significant width, forming a key component of the high-grade polymetallic VMS mineralization and confirming continuity.
Positive factors
- Strong zinc grade for VMS deposit
- Significant intercept width
- High-grade polymetallic mineralization
- Confirms continuity of VMS level
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“11.21”
Context: 12.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · goldGrade: 23.9Grade Unit: g/tIntercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 23.9
- Grade Unit
- g/t
- Intercept
- 1.01 m
- From
- 277.35 m
- To
- 278.36 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-278.36
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 28.63
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grades over a narrow width, highlighting a very high-grade zone within the broader polymetallic intercept.
Positive factors
- Exceptional gold grade
- High-grade polymetallic sub-interval
- Confirms very high-grade zones within broader intercept
Negative factors
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“23.9”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · copperGrade: 0.61Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.61
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 277.35 m
- To
- 278.36 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-278.36
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 28.63
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a moderate copper grade over a narrow width, contributing to the high-grade polymetallic nature of the zone.
Positive factors
- Moderate copper grade for VMS deposit
- Part of high-grade polymetallic sub-interval
Negative factors
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.61”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · silverGrade: 157.3Grade Unit: g/tIntercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 157.3
- Grade Unit
- g/t
- Intercept
- 1.01 m
- From
- 277.35 m
- To
- 278.36 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-278.36
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 28.63
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a narrow width, contributing to the high-grade polymetallic nature of the zone.
Positive factors
- Moderate silver grade
- Part of high-grade polymetallic sub-interval
Negative factors
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“157.3”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · leadGrade: 0.81Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 277.35 m
- To
- 278.36 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-278.36
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 28.63
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a weak lead grade over a narrow width, contributing to the polymetallic nature but not a primary driver of value.
Positive factors
- Part of high-grade polymetallic sub-interval
Negative factors
- Weak lead grade
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.81”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · zincGrade: 7.65Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 7.65
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 277.35 m
- To
- 278.36 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:277.35-278.36
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 28.63
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade over a narrow width, contributing to the high-grade polymetallic nature of the zone.
Positive factors
- Moderate zinc grade for VMS deposit
- Part of high-grade polymetallic sub-interval
Negative factors
- Narrow intercept width
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“7.65”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · goldGrade: 9.95Grade Unit: g/tIntercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 9.95
- Grade Unit
- g/t
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grades over a moderate width, forming part of a very high-grade polymetallic zone with outstanding zinc values.
Positive factors
- Exceptional gold grade
- High-grade polymetallic sub-interval with very high zinc
- Confirms very high-grade zones within broader intercept
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“9.95”
Context: 3.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · copperGrade: 2.39Grade Unit: %Intercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 2.39
- Grade Unit
- %
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows strong copper grades over a moderate width, significantly contributing to the high-grade polymetallic nature of the zone.
Positive factors
- Strong copper grade for VMS deposit
- Part of high-grade polymetallic sub-interval
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“2.39”
Context: 3.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · silverGrade: 120.7Grade Unit: g/tIntercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 120.7
- Grade Unit
- g/t
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a moderate width, contributing to the high-grade polymetallic nature of the zone.
Positive factors
- Moderate silver grade
- Part of high-grade polymetallic sub-interval
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“120.7”
Context: 3.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · leadGrade: 0.56Grade Unit: %Intercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.56
- Grade Unit
- %
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a weak lead grade over a moderate width, contributing to the polymetallic nature but not a primary driver of value.
Positive factors
- Part of high-grade polymetallic sub-interval
Negative factors
- Weak lead grade
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.56”
Context: 3.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · zincGrade: 35.85Grade Unit: %Intercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 35.85
- Grade Unit
- %
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows exceptional zinc grades over a moderate width, representing a very high-grade polymetallic zone. The pending re-analysis of a sample above 40% Zn suggests even higher potential.
Positive factors
- Exceptional zinc grade for VMS deposit
- Very high-grade polymetallic sub-interval
- Confirms very high-grade zones within broader intercept
- One sample above detection limit (>40% Zn) pending re-analysis, indicating potential for even higher grades
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“35.85”
Context: 3.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · goldGrade: 8.72Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 8.72
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grades over a moderate width, contributing to the high-grade polymetallic nature of the overall intercept.
Positive factors
- Exceptional gold grade
- Moderate intercept width
- High-grade polymetallic sub-interval
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“8.72”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · copperGrade: 0.07Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing minimally to the overall polymetallic value.
Positive factors
- Part of polymetallic sub-interval
Negative factors
- Very low copper grade
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.07”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · silverGrade: 207.4Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 207.4
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows strong silver grades over a moderate width, contributing positively to the high-grade polymetallic nature of the zone.
Positive factors
- Strong silver grade
- Moderate intercept width
- Part of high-grade polymetallic sub-interval
Negative factors
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“207.4”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · leadGrade: 0.3Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a weak lead grade over a moderate width, contributing to the polymetallic nature but not a primary driver of value.
Positive factors
- Part of high-grade polymetallic sub-interval
Negative factors
- Weak lead grade
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.30”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
TIR-26-62Cachimbo target · zincGrade: 0.66Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- TIR-26-62
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 112.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- TIR-26-62:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade, contributing minimally to the overall polymetallic value.
Positive factors
- Part of polymetallic sub-interval
Negative factors
- Very low zinc grade
- Apparent width only, true width not determined
- Metal equivalent assumptions lack recovery data
Evidence · table
“0.66”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · goldGrade: 9.95Grade Unit: g/tIntercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 9.95
- Grade Unit
- g/t
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 279.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 9.95 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 33.3 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 9.95 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.95”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · copperGrade: 2.39Grade Unit: %Intercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 2.39
- Grade Unit
- %
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 279.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 2.39 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 8.0 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.39 % copper is strong on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.39”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · silverGrade: 120.7Grade Unit: g/tIntercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 120.7
- Grade Unit
- g/t
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 279.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 120.7 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 404.3 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“120.7”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · leadGrade: 0.56Grade Unit: %Intercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.56
- Grade Unit
- %
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 279.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.56 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.56 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.56”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · zincGrade: 35.85Grade Unit: %Intercept: 3.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 35.85
- Grade Unit
- %
- Intercept
- 3.35 m
- From
- 279.35 m
- To
- 282.7 m
- Intercept Depth
- 279.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:279.35-282.7
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 24.38
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 35.85 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 120.1 %·m is strong (grade alone is exceptional; the better of the two is used).
Positive factors
- 35.85 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35.85”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · goldGrade: 8.72Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- gold
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 8.72
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 285.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 8.72 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 34.9 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 8.72 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.72”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · copperGrade: 0.07Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- copper
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 285.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · silverGrade: 207.4Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- silver
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 207.4
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 285.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 207.4 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 829.6 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 207.4 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“207.4”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · leadGrade: 0.3Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- lead
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 285.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.2 %·m is below.
Negative factors
- 0.3 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
andCachimbo target · zincGrade: 0.66Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Cachimbo target
- Commodity
- zinc
- Region
- dominican republic
- Reported Region
- dominican republic
- Ticker
- GQC
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 4 m
- From
- 285.5 m
- To
- 289.5 m
- Intercept Depth
- 285.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- and:285.5-289.5
QA/QC
- Laboratory
- Bureau Veritas Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.29
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.66 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.6 %·m is below.
Negative factors
- 0.66 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.66”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: an equivalent grade is reported without its assumptions
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole TIR-26-62, a follow-up to discovery hole TIR-26-58, intersected 12.15 metres of high-grade polymetallic VMS m"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.