Graphano Expands Graphite Zones at the Black Pearl Graphite Project
Original announcement by tmx on
- Company
- Graphano Energy Ltd.
- Ticker
- GEL
- Exchange
- TSX
- Region
- Quebec, Canada
- Primary commodity
- Graphite
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-12 05:20:20 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Graphano Energy reported final assay results from its initial nine-hole drill program at the Black Pearl Graphite Project in Quebec, Canada, confirming extensive near-surface graphite mineralization. The program successfully expanded graphite zones and highlighted the district-scale potential of the Black Pearl-Standard Mine area. Key intercepts include 11.33% Cg over 8.61 metres in BP25-01 and 16.50% Cg over 0.85 metres in BP25-08, with all results indicating the effectiveness of geophysical targeting.
Reasoning: Graphano's initial drill program at Black Pearl successfully confirmed extensive near-surface graphite mineralization across multiple conductive trends, indicating significant district-scale potential. The results include several high-grade intercepts, although true widths are yet to be determined.
Positive factors
- Extensive near-surface graphite mineralization confirmed
- District-scale potential highlighted
- QA/QC procedures disclosed and lab certified
- Qualified Person sign-off
Negative factors
- True width not yet determined for reported intercepts
- Low core recovery for a specific high-grade interval in BP25-03
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 26
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release explicitly states that samples were sent to Activation Laboratories (ACTLABS), an accredited ISO Certified Laboratory, and that the program included field duplicates, blanks, and a graphite standard sample for QA/QC purposes.
Evidence · text
“All drill core samples were sampled, stored and shipped using industry best practices and were delivered to Activation Laboratories (" ACTLABS "), Ancaster, Ontario, for sample preparation and analyses using laboratories' Code 4F-C Graphitic, analyzing C-Graphite (infrared), where the sample is subjected to a multistage furnace treatment to remove all forms of carbon with the exception of graphitic carbon; and C-Total (infrared). ACTLABS is an independent commercial, accredited ISO Certified Laboratory. The core sample program also included field duplicates, blanks and a graphite standard sample for quality control and quality assurance (QA/QC) purposes.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The scientific and technical content has been reviewed and approved by Roger Dahn, B.Sc., P.Geo., a director of the Company and a 'Qualified Person' as defined in National Instrument 43-101.
Evidence · text
“The scientific and technical content disclosed in this press release has been reviewed and approved by Roger Dahn, B.Sc., P.Geo., a director of the Company and a "Qualified Person" as defined in National Instrument 43-101 - Standards of Disclosure for Mineral Projects .”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The notes section of the drill results table explicitly states that 'Intervals are core length. True width will be defined with additional drilling', indicating that only downhole lengths are reported.
Evidence · table
“Intervals are core length. True width will be defined with additional drilling”
Context: Notes:
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The document states that the primary focus of the drill program was on 'graphite zone expansion' and that 'further exploration is warranted to follow-up this sector of mineralization on the property'.
Evidence · text
“The primary focus of this first ever drill program at Black Pearl was on broadly evaluating the deposit's larger scale potential, enhancing the structural understanding of the area, and on graphite zone expansion.”
Maiden Resourceneutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component. No prior estimate exists, so every change band is not applicable.
Why it applies: The document refers to this as the 'first ever drill program at Black Pearl', establishing a baseline for the project.
Evidence · text
“The primary focus of this first ever drill program at Black Pearl”
Extracted facts
Stored fact records: 26. Some facts used in scoring do not have a stored record.
Drill Results (26)
BP25-01Black Pearl · graphiteGrade: 15.1Grade Unit: %Intercept: 0.49 mView all detailsHide details
Identity
- Hole ID
- BP25-01
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 15.1
- Grade Unit
- %
- Intercept
- 0.49 m
- From
- 10.83 m
- To
- 11.32 m
- Intercept Depth
- 10.83 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-01:10.83-11.32
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This intercept shows an exceptional graphite grade near surface, contributing positively to the project's potential, though the length is narrow and true width is not known.
Positive factors
- Exceptional graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“15.10”
Context: 0.49
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-01Black Pearl · graphiteGrade: 11.33Grade Unit: %Intercept: 8.61 mView all detailsHide details
Identity
- Hole ID
- BP25-01
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 11.33
- Grade Unit
- %
- Intercept
- 8.61 m
- From
- 18.64 m
- To
- 27.25 m
- Intercept Depth
- 10.83 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-01:18.64-27.25
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This intercept combines an exceptional graphite grade with a moderate length near surface, significantly contributing to the project's potential, though true width is not known.
Positive factors
- Exceptional graphite grade
- Moderate intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“11.33”
Context: 8.61
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-01Black Pearl · graphiteGrade: 6.73Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- BP25-01
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 6.73
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 45.95 m
- To
- 46.8 m
- Intercept Depth
- 10.83 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-01:45.95-46.8
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade was intersected, but the narrow length limits its individual materiality, and true width is not known.
Positive factors
- Strong graphite grade
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“6.73”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-02Black Pearl · graphiteGrade: 6.46Grade Unit: %Intercept: 0.48 mView all detailsHide details
Identity
- Hole ID
- BP25-02
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 6.46
- Grade Unit
- %
- Intercept
- 0.48 m
- From
- 12.73 m
- To
- 13.21 m
- Intercept Depth
- 12.73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-02:12.73-13.21
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -85 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade was intersected near surface, but the narrow length limits its individual materiality, and true width is not known.
Positive factors
- Strong graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“6.46”
Context: 0.48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-02Black Pearl · graphiteGrade: 4.53Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- BP25-02
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 4.53
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 20.5 m
- To
- 26 m
- Intercept Depth
- 12.73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-02:20.5-26
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -85 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade over a moderate length near surface is a positive result, though true width is not known.
Positive factors
- Moderate graphite grade
- Moderate intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“4.53”
Context: 5.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-02Black Pearl · graphiteGrade: 6.65Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- BP25-02
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 6.65
- Grade Unit
- %
- Intercept
- 3 m
- From
- 23 m
- To
- 26 m
- Intercept Depth
- 12.73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-02:23-26
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -85 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This sub-interval shows a strong graphite grade over a narrow length near surface, contributing positively to the overall mineralization, though true width is not known.
Positive factors
- Strong graphite grade
- Narrow intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“6.65”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-02Black Pearl · graphiteGrade: 7.95Grade Unit: %Intercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- BP25-02
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 7.95
- Grade Unit
- %
- Intercept
- 3.75 m
- From
- 31.9 m
- To
- 35.65 m
- Intercept Depth
- 12.73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-02:31.9-35.65
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -85 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade over a narrow length near surface is a positive result, though true width is not known.
Positive factors
- Strong graphite grade
- Narrow intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“7.95”
Context: 3.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-03Black Pearl · graphiteGrade: 7.37Grade Unit: %Intercept: 4.7 mView all detailsHide details
Identity
- Hole ID
- BP25-03
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 7.37
- Grade Unit
- %
- Intercept
- 4.7 m
- From
- 12 m
- To
- 16.7 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-03:12-16.7
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade over a moderate length near surface is a positive result, though true width is not known.
Positive factors
- Strong graphite grade
- Moderate intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“7.37”
Context: 4.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-03Black Pearl · graphiteGrade: 8.09Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- BP25-03
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 8.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 12 m
- To
- 13 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-03:12-13
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This high-grade sub-interval is positive, but its narrow length and particularly the low core recovery (30%) reduce confidence in its representativeness and overall materiality.
Positive factors
- Strong graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
- Low core recovery (30%)
Evidence · text
“In hole BP25-03, the interval from 12.0 to 16.7 metres grading 7.37% Cg over 4.7 metres includes a sample interval (from 12.0 to 13.0 metres) grading 8.09% Cg which had 30% core recovery.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-03Black Pearl · graphiteGrade: 9.94Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- BP25-03
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 9.94
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 25.14 m
- To
- 25.64 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-03:25.14-25.64
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade was intersected near surface, but the very narrow length limits its individual materiality, and true width is not known.
Positive factors
- Strong graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“9.94”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-03Black Pearl · graphiteGrade: 7.01Grade Unit: %Intercept: 3.14 mView all detailsHide details
Identity
- Hole ID
- BP25-03
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 7.01
- Grade Unit
- %
- Intercept
- 3.14 m
- From
- 38.86 m
- To
- 42 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-03:38.86-42
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade over a narrow length is a positive result, though true width is not known.
Positive factors
- Strong graphite grade
- Narrow intercept length
Negative factors
- Apparent width only
Evidence · table
“7.01”
Context: 3.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-03Black Pearl · graphiteGrade: 4.77Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- BP25-03
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 4.77
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 44.5 m
- To
- 51 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-03:44.5-51
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade over a moderate length is a positive result, though true width is not known.
Positive factors
- Moderate graphite grade
- Moderate intercept length
Negative factors
- Apparent width only
Evidence · table
“4.77”
Context: 6.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-04Black Pearl · graphiteGrade: 4.95Grade Unit: %Intercept: 2.05 mView all detailsHide details
Identity
- Hole ID
- BP25-04
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 4.95
- Grade Unit
- %
- Intercept
- 2.05 m
- From
- 8.25 m
- To
- 10.3 m
- Intercept Depth
- 8.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-04:8.25-10.3
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade near surface is a positive result, though the narrow length and unknown true width limit its individual materiality.
Positive factors
- Moderate graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“4.95”
Context: 2.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-04Black Pearl · graphiteGrade: 3.55Grade Unit: %Intercept: 0.74 mView all detailsHide details
Identity
- Hole ID
- BP25-04
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 3.55
- Grade Unit
- %
- Intercept
- 0.74 m
- From
- 30.16 m
- To
- 30.9 m
- Intercept Depth
- 8.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-04:30.16-30.9
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade was intersected, but the very narrow length limits its individual materiality, and true width is not known.
Positive factors
- Moderate graphite grade
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“3.55”
Context: 0.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-04Black Pearl · graphiteGrade: 4.92Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- BP25-04
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 4.92
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 47.75 m
- To
- 48.15 m
- Intercept Depth
- 8.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-04:47.75-48.15
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade was intersected, but the very narrow length limits its individual materiality, and true width is not known.
Positive factors
- Moderate graphite grade
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“4.92”
Context: 0.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-05Black Pearl · graphiteGrade: 2.43Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- BP25-05
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 2.43
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 35.9 m
- To
- 36.7 m
- Intercept Depth
- 35.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-05:35.9-36.7
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade was intersected, but the very narrow length limits its individual materiality, and true width is not known.
Positive factors
- Moderate graphite grade
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“2.43”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-06Black Pearl · graphiteGrade: 4.81Grade Unit: %Intercept: 12.25 mView all detailsHide details
Identity
- Hole ID
- BP25-06
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 4.81
- Grade Unit
- %
- Intercept
- 12.25 m
- From
- 32.85 m
- To
- 45.1 m
- Intercept Depth
- 32.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-06:32.85-45.1
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This broad zone of moderate-grade graphite near surface is a significant positive result, indicating potential for bulk tonnage, though true width is not known.
Positive factors
- Moderate graphite grade
- Strong intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“4.81”
Context: 12.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-06Black Pearl · graphiteGrade: 6.63Grade Unit: %Intercept: 7.07 mView all detailsHide details
Identity
- Hole ID
- BP25-06
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 6.63
- Grade Unit
- %
- Intercept
- 7.07 m
- From
- 34.03 m
- To
- 41.1 m
- Intercept Depth
- 32.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-06:34.03-41.1
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This sub-interval within a broader zone shows a strong graphite grade over a moderate length near surface, enhancing the overall prospectivity, though true width is not known.
Positive factors
- Strong graphite grade
- Moderate intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“6.63”
Context: 7.07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-06Black Pearl · graphiteGrade: 9.69Grade Unit: %Intercept: 3.97 mView all detailsHide details
Identity
- Hole ID
- BP25-06
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 9.69
- Grade Unit
- %
- Intercept
- 3.97 m
- From
- 34.03 m
- To
- 38 m
- Intercept Depth
- 32.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-06:34.03-38
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This high-grade sub-interval within a broader zone shows a strong graphite grade over a narrow length near surface, further enhancing the overall prospectivity, though true width is not known.
Positive factors
- Strong graphite grade
- Narrow intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“9.69”
Context: 3.97
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-06Black Pearl · graphiteGrade: 10.2Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- BP25-06
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 10.2
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 43.15 m
- To
- 43.85 m
- Intercept Depth
- 32.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-06:43.15-43.85
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional graphite grade near surface, contributing positively to the overall mineralization, though the length is very narrow and true width is not known.
Positive factors
- Exceptional graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“10.20”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-07Black Pearl · graphiteGrade: 6.4Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- BP25-07
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 6.4
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 65.2 m
- To
- 65.6 m
- Intercept Depth
- 65.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-07:65.2-65.6
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 225 °
- Dip
- -65 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade was intersected, but the very narrow length limits its individual materiality, and true width is not known.
Positive factors
- Strong graphite grade
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“6.40”
Context: 0.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-08Black Pearl · graphiteGrade: 16.5Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- BP25-08
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 16.5
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 0.25 m
- To
- 1.1 m
- Intercept Depth
- 0.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-08:0.25-1.1
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 335 °
- Dip
- -40 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This intercept shows an exceptional graphite grade at very shallow depth, contributing positively to the project's potential, though the length is narrow and true width is not known.
Positive factors
- Exceptional graphite grade
- Very near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“16.50”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-08Black Pearl · graphiteGrade: 9.92Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- BP25-08
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 9.92
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 10.3 m
- To
- 13.5 m
- Intercept Depth
- 0.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-08:10.3-13.5
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 335 °
- Dip
- -40 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A strong graphite grade over a narrow length near surface is a positive result, though true width is not known.
Positive factors
- Strong graphite grade
- Narrow intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“9.92”
Context: 3.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-08Black Pearl · graphiteGrade: 4.93Grade Unit: %Intercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- BP25-08
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 4.93
- Grade Unit
- %
- Intercept
- 6.7 m
- From
- 17.5 m
- To
- 24.2 m
- Intercept Depth
- 0.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-08:17.5-24.2
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 335 °
- Dip
- -40 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: A moderate graphite grade over a moderate length near surface is a positive result, though true width is not known.
Positive factors
- Moderate graphite grade
- Moderate intercept length
- Near-surface intercept
Negative factors
- Apparent width only
Evidence · table
“4.93”
Context: 6.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-08Black Pearl · graphiteGrade: 15.95Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- BP25-08
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 15.95
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 21.6 m
- To
- 23.2 m
- Intercept Depth
- 0.25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-08:21.6-23.2
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 335 °
- Dip
- -40 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This high-grade sub-interval shows an exceptional graphite grade near surface, contributing positively to the overall mineralization, though the length is narrow and true width is not known.
Positive factors
- Exceptional graphite grade
- Near-surface intercept
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“15.95”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
BP25-09Black Pearl · graphiteGrade: 1.84Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- BP25-09
- Project
- Black Pearl
- Commodity
- graphite
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- GEL
Geometry
- Grade
- 1.84
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 29.4 m
- To
- 30.8 m
- Intercept Depth
- 29.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BP25-09:29.4-30.8
Location
- CRS
- UTM Nad 83, Zone 18
- Azimuth
- 275 °
- Dip
- -45 °
- Loc. Confidence
- low
QA/QC
- Laboratory
- ACTLABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-10-14T00:00:00.000Z
Reasoning: This intercept shows a weak graphite grade over a narrow length, limiting its individual materiality, and true width is not known.
Negative factors
- Weak graphite grade
- Narrow intercept length
- Apparent width only
Evidence · table
“1.84”
Context: 1.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Black Pearl claims are located immediately east of Graphano's advanced-stage Standard Mine project (Figure 1), which"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.