GSP Drills 2.41% Copper, 35 g/t Silver, & 0.68 g/t Gold (3.09% CuEq) Over 17.4m, including 4.11% Copper, 60 g/t Silver & 0.95 g/t Gold (5.16% CuEq) Over 8.4m in Initial Drill Results from Alwin Project, BC and Completes 100% Acquisition of Alwin Mine Property
Original announcement by tmx on
- Company
- GSP Resource Corp.
- Ticker
- GSPR
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Copper
- Secondary commodities
- Silver, Gold
- Document categories
- Drill results, Agreement transaction, Resource update
- Extracted
- 2026-09-18 03:20:25 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
GSP Resource Corp. has released high-grade initial drill results from the Alwin Project in British Columbia, highlighted by a 4.11% Cu intercept. Simultaneously, the company has completed the 100% acquisition of the Alwin Mine Property.
Reasoning: The announcement contains high-grade initial drill results from a new project and confirms the successful completion of a 100% acquisition, both of which are highly material to the company's value proposition.
Positive factors
- High-grade copper intercepts (4.11% Cu) significantly exceeding resource cut-offs
- Successful 100% acquisition of the Alwin Project
- Presence of consistent silver and gold credits
- QA/QC protocols and accredited laboratory (ALS) disclosed
Facts used in scoring: 19
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 4.11% Cu intercept is exceptionally high for a copper-gold project in this context.
Evidence · text
“including 4.11% Copper, 60 g/t Ag and 0.95 g/t Au over 8.4 m”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes details on ALS accreditation, blanks, duplicates, and standards.
Evidence · text
“ALS is an ISO-IEC 17025:2017 and ISO 9001:2015 accredited geoanalytical laboratory”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: Project is adjacent to the large Highland Valley Mine.
Evidence · text
“The Alwin Project is adjacent with the western boundary of Teck Resources’ Highland Valley Mine”
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The project currently hosts an inferred mineral resource.
Evidence · text
“The Alwin Project hosts current inferred mineral resources comprising 1.46 million tonnes (Mt)”
Extracted facts
Stored fact records: 19. Some facts used in scoring do not have a stored record.
Drill Results (18)
AM-24-01Alwin · copperGrade: 1.01Grade Unit: %Intercept: 5.52 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 5.52 m
- From
- 91.68 m
- To
- 97.2 m
- Intercept Depth
- 91.68 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:91.68-97.2
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Standard intercept in the upper zone.
Evidence · table
“1.01”
Context: 91.68
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · silverGrade: 10.67Grade Unit: g/tIntercept: 5.52 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 10.67
- Grade Unit
- g/t
- Intercept
- 5.52 m
- From
- 91.68 m
- To
- 97.2 m
- Intercept Depth
- 91.68 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:91.68-97.2
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Silver credit in upper zone.
Evidence · table
“10.67”
Context: 91.68
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · goldGrade: 0.04Grade Unit: g/tIntercept: 5.52 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 5.52 m
- From
- 91.68 m
- To
- 97.2 m
- Intercept Depth
- 91.68 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:91.68-97.2
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Trace gold in upper zone.
Evidence · table
“0.04”
Context: 91.68
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · copperGrade: 2.41Grade Unit: %Intercept: 17.43 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 2.41
- Grade Unit
- %
- Intercept
- 17.43 m
- From
- 110.4 m
- To
- 127.83 m
- Intercept Depth
- 110.4 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:110.4-127.83
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Main high-grade zone.
Positive factors
- Strong copper grade over significant width
Evidence · table
“2.41”
Context: 110.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · silverGrade: 34.64Grade Unit: g/tIntercept: 17.43 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 34.64
- Grade Unit
- g/t
- Intercept
- 17.43 m
- From
- 110.4 m
- To
- 127.83 m
- Intercept Depth
- 110.4 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:110.4-127.83
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Significant silver credit.
Evidence · table
“34.64”
Context: 110.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · goldGrade: 0.68Grade Unit: g/tIntercept: 17.43 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 17.43 m
- From
- 110.4 m
- To
- 127.83 m
- Intercept Depth
- 110.4 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:110.4-127.83
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Consistent gold value.
Evidence · table
“0.68”
Context: 110.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · copperGrade: 4.11Grade Unit: %Intercept: 8.35 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 4.11
- Grade Unit
- %
- Intercept
- 8.35 m
- From
- 110.9 m
- To
- 119.25 m
- Intercept Depth
- 110.9 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:110.9-119.25
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: High-grade core of the intercept.
Positive factors
- Exceptional copper grade
Evidence · table
“4.11”
Context: 110.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · silverGrade: 60.07Grade Unit: g/tIntercept: 8.35 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 60.07
- Grade Unit
- g/t
- Intercept
- 8.35 m
- From
- 110.9 m
- To
- 119.25 m
- Intercept Depth
- 110.9 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:110.9-119.25
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: High silver grade.
Evidence · table
“60.07”
Context: 110.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01Alwin · goldGrade: 0.95Grade Unit: g/tIntercept: 8.35 mView all detailsHide details
Identity
- Hole ID
- AM-24-01
- Project
- Alwin
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.95
- Grade Unit
- g/t
- Intercept
- 8.35 m
- From
- 110.9 m
- To
- 119.25 m
- Intercept Depth
- 110.9 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01:110.9-119.25
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: High grade gold in intercept.
Evidence · table
“0.95”
Context: 110.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01 (-57 o /019)Alwin · copperGrade: 1.01Grade Unit: %Intercept: 5.52 mView all detailsHide details
Identity
- Hole ID
- AM-24-01 (-57 o /019)
- Project
- Alwin
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 5.52 m
- From
- 91.68 m
- To
- 97.2 m
- Intercept Depth
- 91.68 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01 (-57 o /019):91.68-97.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 1.01 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 5.6 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 1.01 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.01”
Context: AM-24-01 (-57 o /019)
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01 (-57 o /019)Alwin · silverGrade: 10.67Grade Unit: g/tIntercept: 5.52 mView all detailsHide details
Identity
- Hole ID
- AM-24-01 (-57 o /019)
- Project
- Alwin
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 10.67
- Grade Unit
- g/t
- Intercept
- 5.52 m
- From
- 91.68 m
- To
- 97.2 m
- Intercept Depth
- 91.68 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01 (-57 o /019):91.68-97.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 10.67 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 58.9 g/t·m is below.
Negative factors
- 10.67 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.67”
Context: AM-24-01 (-57 o /019)
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AM-24-01 (-57 o /019)Alwin · goldGrade: 0.04Grade Unit: g/tIntercept: 5.52 mView all detailsHide details
Identity
- Hole ID
- AM-24-01 (-57 o /019)
- Project
- Alwin
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 5.52 m
- From
- 91.68 m
- To
- 97.2 m
- Intercept Depth
- 91.68 m
Classification
- Sample Type
- drill
- Group ID
- AM-24-01 (-57 o /019):91.68-97.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: AM-24-01 (-57 o /019)
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andAlwin · copperGrade: 2.41Grade Unit: %Intercept: 17.43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Alwin
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 2.41
- Grade Unit
- %
- Intercept
- 17.43 m
- From
- 110.4 m
- To
- 127.83 m
- Intercept Depth
- 110.4 m
Classification
- Sample Type
- drill
- Group ID
- and:110.4-127.83
- Mining Method
- open_pit
Location
- Location
- Upper Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 2.41 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 42.0 %·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 2.41 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.41”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andAlwin · silverGrade: 34.64Grade Unit: g/tIntercept: 17.43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Alwin
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 34.64
- Grade Unit
- g/t
- Intercept
- 17.43 m
- From
- 110.4 m
- To
- 127.83 m
- Intercept Depth
- 110.4 m
Classification
- Sample Type
- drill
- Group ID
- and:110.4-127.83
- Mining Method
- open_pit
Location
- Location
- Upper Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 34.64 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 603.8 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“34.64”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andAlwin · goldGrade: 0.68Grade Unit: g/tIntercept: 17.43 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Alwin
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 17.43 m
- From
- 110.4 m
- To
- 127.83 m
- Intercept Depth
- 110.4 m
Classification
- Sample Type
- drill
- Group ID
- and:110.4-127.83
- Mining Method
- open_pit
Location
- Location
- Upper Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 0.68 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 11.9 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.68”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andAlwin · copperGrade: 4.11Grade Unit: %Intercept: 8.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Alwin
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 4.11
- Grade Unit
- %
- Intercept
- 8.35 m
- From
- 110.9 m
- To
- 119.25 m
- Intercept Depth
- 110.9 m
Classification
- Sample Type
- drill
- Group ID
- and:110.9-119.25
- Mining Method
- open_pit
Location
- Location
- Upper Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 4.11 % copper is exceptional against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 34.3 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 4.11 % copper is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.11”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andAlwin · silverGrade: 60.07Grade Unit: g/tIntercept: 8.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Alwin
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 60.07
- Grade Unit
- g/t
- Intercept
- 8.35 m
- From
- 110.9 m
- To
- 119.25 m
- Intercept Depth
- 110.9 m
Classification
- Sample Type
- drill
- Group ID
- and:110.9-119.25
- Mining Method
- open_pit
Location
- Location
- Upper Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 60.07 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 501.6 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“60.07”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andAlwin · goldGrade: 0.95Grade Unit: g/tIntercept: 8.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Alwin
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.95
- Grade Unit
- g/t
- Intercept
- 8.35 m
- From
- 110.9 m
- To
- 119.25 m
- Intercept Depth
- 110.9 m
Classification
- Sample Type
- drill
- Group ID
- and:110.9-119.25
- Mining Method
- open_pit
Location
- Location
- Upper Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Expanded from assay table. 0.95 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 7.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.95”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Resource Estimates (1)
inferredAlwin Project · copperTonnes: 1460000Grade: 1.08Grade Unit: %Contained Metal: 34600000Contained Unit: lbsView all detailsHide details
Identity
- Project
- Alwin Project
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- British Columbia
- Ticker
- GSPR
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101
- Resource group id
- resource:45888689a46d427e4fe0
- Mining method
- combined
Resource Data
- Category
- inferred
- Tonnes
- 1460000
- Grade
- 1.08
- Grade Unit
- %
- Contained Metal
- 34600000
- Contained Unit
- lbs
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2025-01-13T00:00:00.000Z
Reasoning: Existing inferred resource mentioned as context.
Evidence · text
“1.46 million tonnes (Mt) tonnes, at an average grade of 1.08% copper (Cu)”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.