GSP Samples 87 g/t Silver, 3.3% Copper, & 2.3 g/t Gold, Demonstrating Multiple New Base and Precious Metals Targets Across the Combined Alwin Mine and Mer Properties
Original announcement by tmx on
- Company
- GSP Resource Corp.
- Ticker
- GSPR
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Copper
- Secondary commodities
- Silver, Gold
- Document categories
- Drill results
- Extracted
- 2026-09-18 03:09:43 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
GSP Resource Corp. announced high-grade surface rock sample results from its Fall 2025 reconnaissance program at the Alwin Mine and Mer Properties in British Columbia. Highlights include 348 g/t silver and 11.85% copper from the Apex Zone, and 2.26 g/t gold from another Apex sample. These results define multiple new base and precious metals targets, warranting follow-up exploration and diamond drilling.
Reasoning: High-grade polymetallic surface rock samples from a reconnaissance program define new targets, indicating strong exploration potential, but the results are from selective grab samples which inherently have limitations on representativeness.
Positive factors
- High-grade polymetallic surface samples
- Identification of multiple new base and precious metals targets
- QA/QC procedures disclosed and QP signed off
Negative factors
- Results are from selective rock grab samples, not necessarily representative of mineralization continuity
- Assays for additional soil samples are pending
Facts used in scoring: 55
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated section detailing QA/QC procedures, including the use of an ISO-accredited lab, standards, blanks, and duplicates, and is signed off by a Qualified Person.
Evidence · text
“The analytical work reported on herein was performed by ALS Global (“ALS”), Vancouver, Canada. ALS is an ISO-IEC 17025:2017 and ISO 9001:2015 accredited geoanalytical laboratory and is independent of GSP Resource Corp. and the QP. ... GSP Resource Corp. has relied on the internal quality assurance/quality control (QA/QC) measure of ALS which includes the insertion of standard, blank and duplicate samples into the sample stream to confirm the accuracy of the reported results. ... The scientific and technical information contained in this news release has been reviewed and approved by Kristopher J. Raffle, P.Geo. (B.C.), principal and consultant of APEX Geoscience Ltd. of Edmonton, AB, a consultant to the Company and a “qualified person” as defined in National Instrument 43-101 — Standards of Disclosure for Mineral Projects .”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: The Apex Zone target is highlighted for its similarities to the adjacent Alwin Mine, suggesting its potential is partly based on proximity to a known deposit.
Evidence · text
“Assays from the Apex Zone cement this target as a high priority for follow-up exploration and diamond drilling given its high-grade base-plus precious metal signature that bears similarities to the adjacent Alwin Mine.”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Sample E01984 returned an exceptionally high-grade silver value of 348 g/t, well above typical thresholds for surface samples.
Evidence · table
“348”
Context: E01984
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Sample E01984 returned an exceptionally high-grade copper value of 11.85%, well above typical thresholds for surface samples.
Evidence · table
“11.85”
Context: E01984
Extracted facts
Stored fact records: 55. Some facts used in scoring do not have a stored record.
Drill Results (55)
E02007Alwin Mine and Mer Properties · silverGrade: 35Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E02007
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 35
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Alwin Mine
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“35”
Context: E02007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02007Alwin Mine and Mer Properties · copperGrade: 5.52Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02007
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 5.52
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Alwin Mine
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“5.52”
Context: E02007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02009Alwin Mine and Mer Properties · copperGrade: 0.53Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02009
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.53
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Alwin Mine
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.53”
Context: E02009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02010Alwin Mine and Mer Properties · copperGrade: 1.97Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02010
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.97
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Alwin Mine
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.97”
Context: E02010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01974Alwin Mine and Mer Properties · silverGrade: 48Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01974
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 48
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“48”
Context: E01974
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01974Alwin Mine and Mer Properties · copperGrade: 3.33Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01974
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 3.33
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“3.33”
Context: E01974
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01974Alwin Mine and Mer Properties · goldGrade: 1.44Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01974
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.44
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade gold from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade gold in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.44”
Context: E01974
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01975Alwin Mine and Mer Properties · silverGrade: 11Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01975
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 11
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate silver grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“11”
Context: E01975
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01975Alwin Mine and Mer Properties · copperGrade: 0.35Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01975
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.35
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.35”
Context: E01975
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01976Alwin Mine and Mer Properties · copperGrade: 0.14Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01976
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.14
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.14”
Context: E01976
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01977Alwin Mine and Mer Properties · silverGrade: 16Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01977
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 16
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate silver grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“16”
Context: E01977
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01977Alwin Mine and Mer Properties · copperGrade: 0.25Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01977
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.25
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.25”
Context: E01977
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01978Alwin Mine and Mer Properties · copperGrade: 0.72Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01978
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.72
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.72”
Context: E01978
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01978Alwin Mine and Mer Properties · goldGrade: 0.11Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01978
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low gold grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.11”
Context: E01978
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01979Alwin Mine and Mer Properties · silverGrade: 33Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01979
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 33
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“33”
Context: E01979
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01979Alwin Mine and Mer Properties · copperGrade: 0.9Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01979
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.9
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.90”
Context: E01979
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01979Alwin Mine and Mer Properties · goldGrade: 1.07Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01979
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade gold from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade gold in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.07”
Context: E01979
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01980Alwin Mine and Mer Properties · copperGrade: 0.15Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01980
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.15
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.15”
Context: E01980
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01981Alwin Mine and Mer Properties · silverGrade: 83Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01981
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 83
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“83”
Context: E01981
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01981Alwin Mine and Mer Properties · copperGrade: 1.11Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01981
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.11
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.11”
Context: E01981
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01981Alwin Mine and Mer Properties · goldGrade: 2.26Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01981
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 2.26
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade gold from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade gold in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“2.26”
Context: E01981
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01982Alwin Mine and Mer Properties · silverGrade: 87Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01982
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 87
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“87”
Context: E01982
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01982Alwin Mine and Mer Properties · copperGrade: 0.58Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01982
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.58
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.58”
Context: E01982
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01982Alwin Mine and Mer Properties · goldGrade: 0.24Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01982
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low gold grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.24”
Context: E01982
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01983Alwin Mine and Mer Properties · silverGrade: 77Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01983
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 77
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“77”
Context: E01983
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01983Alwin Mine and Mer Properties · copperGrade: 1.99Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01983
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.99
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.99”
Context: E01983
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01983Alwin Mine and Mer Properties · goldGrade: 2.01Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01983
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 2.01
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade gold from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade gold in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“2.01”
Context: E01983
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01984Alwin Mine and Mer Properties · silverGrade: 348Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01984
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 348
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Exceptionally high-grade silver from a surface sample indicates significant potential, but its representativeness is limited by the sample type.
Positive factors
- Exceptionally high-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“348”
Context: E01984
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01984Alwin Mine and Mer Properties · copperGrade: 11.85Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01984
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 11.85
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Exceptionally high-grade copper from a surface sample indicates significant potential, but its representativeness is limited by the sample type.
Positive factors
- Exceptionally high-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“11.85”
Context: E01984
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01984Alwin Mine and Mer Properties · goldGrade: 0.19Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01984
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low gold grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.19”
Context: E01984
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01985Alwin Mine and Mer Properties · silverGrade: 104Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01985
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 104
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade silver from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade silver in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“104”
Context: E01985
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01985Alwin Mine and Mer Properties · copperGrade: 4.14Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01985
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 4.14
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“4.14”
Context: E01985
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01985Alwin Mine and Mer Properties · goldGrade: 1.18Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01985
- Project
- Alwin Mine and Mer Properties
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Apex
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade gold from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade gold in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.18”
Context: E01985
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02000Alwin Mine and Mer Properties · copperGrade: 1.62Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02000
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.62
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Area D
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.62”
Context: E02000
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02005Alwin Mine and Mer Properties · copperGrade: 1.3Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02005
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.3
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Area D
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.30”
Context: E02005
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02006Alwin Mine and Mer Properties · copperGrade: 2.01Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02006
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 2.01
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Area D
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“2.01”
Context: E02006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02002Alwin Mine and Mer Properties · copperGrade: 1.62Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02002
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.62
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Little OK Lake
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.62”
Context: E02002
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E02003Alwin Mine and Mer Properties · copperGrade: 2.58Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E02003
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 2.58
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Little OK Lake
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“2.58”
Context: E02003
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01951Alwin Mine and Mer Properties · copperGrade: 0.52Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01951
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.52
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.52”
Context: E01951
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01954Alwin Mine and Mer Properties · copperGrade: 0.44Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01954
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.44
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.44”
Context: E01954
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01955Alwin Mine and Mer Properties · copperGrade: 0.43Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01955
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.43
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.43”
Context: E01955
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01956Alwin Mine and Mer Properties · copperGrade: 0.23Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01956
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.23
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.23”
Context: E01956
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01957Alwin Mine and Mer Properties · copperGrade: 0.52Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01957
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.52
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.52”
Context: E01957
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01958Alwin Mine and Mer Properties · copperGrade: 0.33Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01958
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.33
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.33”
Context: E01958
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01959Alwin Mine and Mer Properties · copperGrade: 0.37Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01959
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.37
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.37”
Context: E01959
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01961Alwin Mine and Mer Properties · copperGrade: 0.53Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01961
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.53
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.53”
Context: E01961
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01962Alwin Mine and Mer Properties · copperGrade: 0.37Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01962
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.37
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.37”
Context: E01962
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01963Alwin Mine and Mer Properties · copperGrade: 0.15Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01963
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.15
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.15”
Context: E01963
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01965Alwin Mine and Mer Properties · copperGrade: 0.14Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01965
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.14
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.14”
Context: E01965
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01966Alwin Mine and Mer Properties · copperGrade: 0.16Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01966
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.16
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.16”
Context: E01966
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01967Alwin Mine and Mer Properties · copperGrade: 0.22Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01967
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.22
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Low copper grade from a surface sample, indicating minor mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.22”
Context: E01967
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01968Alwin Mine and Mer Properties · copperGrade: 0.78Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01968
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 0.78
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate copper grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“0.78”
Context: E01968
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01969Alwin Mine and Mer Properties · copperGrade: 1.02Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01969
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 1.02
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“1.02”
Context: E01969
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01971Alwin Mine and Mer Properties · silverGrade: 12Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E01971
- Project
- Alwin Mine and Mer Properties
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 12
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Mer East Trenches
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: Moderate silver grade from a surface sample, indicating some mineralization but limited representativeness.
Negative factors
- Result from selective rock grab sample
Evidence · table
“12”
Context: E01971
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E01971Alwin Mine and Mer Properties · copperGrade: 3.08Grade Unit: %View all detailsHide details
Identity
- Hole ID
- E01971
- Project
- Alwin Mine and Mer Properties
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- GSPR
Geometry
- Grade
- 3.08
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Mer East Trenches
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-26T00:00:00.000Z
Reasoning: High-grade copper from a surface sample indicates strong potential, but its representativeness is limited by the sample type.
Positive factors
- High-grade copper in surface sample
Negative factors
- Result from selective rock grab sample
Evidence · table
“3.08”
Context: E01971
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.