GT Resources Drilling Intersects 2.4% Copper and 3.1 g/t Gold Near Surface at the Canalask Nickel-Copper Project
Original announcement by tmx on
- Company
- GT Resources Inc.
- Ticker
- GT
- Exchange
- TSX
- Region
- Yukon, Canada
- Primary commodity
- Nickel
- Secondary commodities
- Copper, Gold, Palladium, Platinum, Cobalt
- Document categories
- Drill results
- Extracted
- 2026-09-18 03:26:07 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
GT Resources Inc. announced final assay results from its 2024 exploration campaign at the Canalask Nickel-Copper Project in Yukon, Canada. Highlights include a new discovery of skarn-related copper-gold mineralization with intercepts up to 2.4% Cu and 3.1 g/t Au over 1.0 meter, and high-grade nickel mineralization up to 12.90% Ni over 0.2 meters. The results confirm the polymetallic potential of the project, with significant nickel, copper, gold, palladium, and platinum values, but reported widths are drilled widths and not true widths.
Reasoning: The document reports high-grade nickel, copper, and gold intercepts, including a new discovery of skarn-related copper-gold mineralization, which adds significant value and exploration potential to the project. The polymetallic nature with PGEs is also a strong positive. However, the lack of true width disclosure and reliance on historical estimates for context are minor drawbacks.
Positive factors
- Discovery of new skarn-related copper-gold mineralization
- High-grade nickel intercepts, including 12.90% Ni over 0.2m
- Significant polymetallic mineralization (Ni, Cu, Au, Pd, Pt, Co)
- Near-surface intercepts
- QA/QC procedures disclosed
Negative factors
- True width not stated for reported intercepts
- Historical resource estimate not verified or compliant with current standards
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 163
Extracted facts
Stored fact records: 163. Some facts used in scoring do not have a stored record.
Drill Results (163)
CSK24-02Canalask · nickelGrade: 2.12Grade Unit: %Intercept: 19.9 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 2.12
- Grade Unit
- %
- Intercept
- 19.9 m
- From
- 17.6 m
- To
- 37.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 17.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:17.6-37.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: This intercept shows a strong nickel grade over a good width near surface, indicating potential for bulk tonnage. The grade is strong for nickel.
Positive factors
- High nickel grade over a significant width
- Near surface intercept
Negative factors
- True width not stated
Evidence · table
“2.12”
Context: 19.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.03Grade Unit: %Intercept: 19.9 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19.9 m
- From
- 17.6 m
- To
- 37.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 17.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:17.6-37.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.03”
Context: 19.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.03Grade Unit: %Intercept: 19.9 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19.9 m
- From
- 17.6 m
- To
- 37.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 17.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:17.6-37.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.03”
Context: 19.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.37Grade Unit: g/tIntercept: 19.9 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 19.9 m
- From
- 17.6 m
- To
- 37.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 17.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:17.6-37.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Palladium is present as a byproduct, adding to the polymetallic nature of the intercept.
Negative factors
- True width not stated
Evidence · table
“0.37”
Context: 19.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 19.9 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 19.9 m
- From
- 17.6 m
- To
- 37.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 17.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:17.6-37.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 19.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.19Grade Unit: g/tIntercept: 19.9 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 19.9 m
- From
- 17.6 m
- To
- 37.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 17.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:17.6-37.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but contributes to the overall polymetallic nature of the intercept.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.19”
Context: 19.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 3.42Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 3.42
- Grade Unit
- %
- Intercept
- 7.4 m
- From
- 19.4 m
- To
- 26.7 m
- Hole Depth
- 200 m
- Intercept Depth
- 19.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:19.4-26.7
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: This sub-interval shows a very strong nickel grade over a good width, significantly enhancing the overall intercept.
Positive factors
- High nickel grade over a good width
- Near surface intercept
Negative factors
- True width not stated
Evidence · table
“3.42”
Context: 7.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.04Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7.4 m
- From
- 19.4 m
- To
- 26.7 m
- Hole Depth
- 200 m
- Intercept Depth
- 19.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:19.4-26.7
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.04”
Context: 7.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.04Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7.4 m
- From
- 19.4 m
- To
- 26.7 m
- Hole Depth
- 200 m
- Intercept Depth
- 19.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:19.4-26.7
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.04”
Context: 7.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.53Grade Unit: g/tIntercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 7.4 m
- From
- 19.4 m
- To
- 26.7 m
- Hole Depth
- 200 m
- Intercept Depth
- 19.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:19.4-26.7
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Palladium is present as a byproduct, adding to the polymetallic nature of the intercept.
Negative factors
- True width not stated
Evidence · table
“0.53”
Context: 7.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 7.4 m
- From
- 19.4 m
- To
- 26.7 m
- Hole Depth
- 200 m
- Intercept Depth
- 19.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:19.4-26.7
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 7.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.37Grade Unit: g/tIntercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 7.4 m
- From
- 19.4 m
- To
- 26.7 m
- Hole Depth
- 200 m
- Intercept Depth
- 19.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:19.4-26.7
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but contributes to the overall polymetallic nature of the intercept.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.37”
Context: 7.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 4.45Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 4.45
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 24.5 m
- To
- 25.8 m
- Hole Depth
- 200 m
- Intercept Depth
- 24.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:24.5-25.8
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: This very high-grade nickel intercept, though narrow, is a significant highlight within the broader interval.
Positive factors
- Very high nickel grade over a narrow interval
- Near surface intercept
Negative factors
- True width not stated
Evidence · table
“4.45”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.05Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 24.5 m
- To
- 25.8 m
- Hole Depth
- 200 m
- Intercept Depth
- 24.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:24.5-25.8
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.05”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.06Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 24.5 m
- To
- 25.8 m
- Hole Depth
- 200 m
- Intercept Depth
- 24.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:24.5-25.8
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.06”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 1.44Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.44
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 24.5 m
- To
- 25.8 m
- Hole Depth
- 200 m
- Intercept Depth
- 24.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:24.5-25.8
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Palladium is present as a byproduct, adding to the polymetallic nature of the intercept.
Negative factors
- True width not stated
Evidence · table
“1.44”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 24.5 m
- To
- 25.8 m
- Hole Depth
- 200 m
- Intercept Depth
- 24.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:24.5-25.8
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.37Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 24.5 m
- To
- 25.8 m
- Hole Depth
- 200 m
- Intercept Depth
- 24.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:24.5-25.8
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but contributes to the overall polymetallic nature of the intercept.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.37”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.28Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 15 m
- From
- 56 m
- To
- 71 m
- Hole Depth
- 200 m
- Intercept Depth
- 56 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:56-71
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The nickel grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low nickel grade
- True width not stated
Evidence · table
“0.28”
Context: 15.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.17Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 15 m
- From
- 56 m
- To
- 71 m
- Hole Depth
- 200 m
- Intercept Depth
- 56 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:56-71
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.17”
Context: 15.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 15 m
- From
- 56 m
- To
- 71 m
- Hole Depth
- 200 m
- Intercept Depth
- 56 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:56-71
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.01”
Context: 15.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 56 m
- To
- 71 m
- Hole Depth
- 200 m
- Intercept Depth
- 56 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:56-71
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No palladium was detected in this interval.
Negative factors
- No palladium detected
- True width not stated
Evidence · table
“0.00”
Context: 15.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 56 m
- To
- 71 m
- Hole Depth
- 200 m
- Intercept Depth
- 56 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:56-71
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 15.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.03Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 56 m
- To
- 71 m
- Hole Depth
- 200 m
- Intercept Depth
- 56 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:56-71
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but it is part of a broader mineralized zone.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.03”
Context: 15.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.41Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 61.5 m
- To
- 69 m
- Hole Depth
- 200 m
- Intercept Depth
- 61.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:61.5-69
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The nickel grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low nickel grade
- True width not stated
Evidence · table
“0.41”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.21Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 61.5 m
- To
- 69 m
- Hole Depth
- 200 m
- Intercept Depth
- 61.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:61.5-69
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.21”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.02Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 61.5 m
- To
- 69 m
- Hole Depth
- 200 m
- Intercept Depth
- 61.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:61.5-69
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.02”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 61.5 m
- To
- 69 m
- Hole Depth
- 200 m
- Intercept Depth
- 61.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:61.5-69
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No palladium was detected in this interval.
Negative factors
- No palladium detected
- True width not stated
Evidence · table
“0.00”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 61.5 m
- To
- 69 m
- Hole Depth
- 200 m
- Intercept Depth
- 61.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:61.5-69
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.05Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 61.5 m
- To
- 69 m
- Hole Depth
- 200 m
- Intercept Depth
- 61.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:61.5-69
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but it is part of a broader mineralized zone.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.05”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.41Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 101 m
- To
- 103.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:101-103.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The nickel grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low nickel grade
- True width not stated
Evidence · table
“0.41”
Context: 2.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.24Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 101 m
- To
- 103.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:101-103.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.24”
Context: 2.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.04Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 101 m
- To
- 103.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:101-103.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is very low and likely not economic on its own, but contributes to the polymetallic nature of the intercept.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.04”
Context: 2.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 101 m
- To
- 103.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:101-103.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No palladium was detected in this interval.
Negative factors
- No palladium detected
- True width not stated
Evidence · table
“0.00”
Context: 2.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 101 m
- To
- 103.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:101-103.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 2.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.03Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 101 m
- To
- 103.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:101-103.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but it is part of a broader mineralized zone.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.03”
Context: 2.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 1.34Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102 m
- To
- 102.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 102 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:102-102.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: This narrow intercept shows a good nickel grade, contributing to the overall mineralization.
Positive factors
- Good nickel grade
Negative factors
- Narrow intercept
- True width not stated
Evidence · table
“1.34”
Context: 0.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.37Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102 m
- To
- 102.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 102 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:102-102.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The copper grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low copper grade
- True width not stated
Evidence · table
“0.37”
Context: 0.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.09Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102 m
- To
- 102.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 102 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:102-102.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is low for this interval, but it is part of a broader mineralized zone.
Negative factors
- Low cobalt grade
- True width not stated
Evidence · table
“0.09”
Context: 0.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102 m
- To
- 102.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 102 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:102-102.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No palladium was detected in this interval.
Negative factors
- No palladium detected
- True width not stated
Evidence · table
“0.00”
Context: 0.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102 m
- To
- 102.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 102 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:102-102.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No platinum was detected in this interval.
Negative factors
- No platinum detected
- True width not stated
Evidence · table
“0.00”
Context: 0.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102 m
- To
- 102.5 m
- Hole Depth
- 200 m
- Intercept Depth
- 102 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:102-102.5
- Mining Method
- unknown
Location
- Location
- Footwall
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The gold grade is low, but it is part of a broader mineralized zone.
Negative factors
- Low gold grade
- True width not stated
Evidence · table
“0.10”
Context: 0.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.01Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 137.5 m
- To
- 138.6 m
- Hole Depth
- 200 m
- Intercept Depth
- 137.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:137.5-138.6
- Mining Method
- unknown
Location
- Location
- Gold-Copper
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The nickel grade is negligible in this copper-gold focused intercept.
Negative factors
- Very low nickel grade
- True width not stated
Evidence · table
“0.01”
Context: 1.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 1.24Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.24
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 137.5 m
- To
- 138.6 m
- Hole Depth
- 200 m
- Intercept Depth
- 137.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:137.5-138.6
- Mining Method
- unknown
Location
- Location
- Gold-Copper
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: This narrow intercept shows a good copper grade, contributing to the new skarn-related mineralization.
Positive factors
- Good copper grade
Negative factors
- Narrow intercept
- True width not stated
Evidence · table
“1.24”
Context: 1.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 137.5 m
- To
- 138.6 m
- Hole Depth
- 200 m
- Intercept Depth
- 137.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:137.5-138.6
- Mining Method
- unknown
Location
- Location
- Gold-Copper
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: The cobalt grade is negligible in this copper-gold focused intercept.
Negative factors
- Very low cobalt grade
- True width not stated
Evidence · table
“0.01”
Context: 1.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 137.5 m
- To
- 138.6 m
- Hole Depth
- 200 m
- Intercept Depth
- 137.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- CSK24-02:137.5-138.6
- Mining Method
- unknown
Location
- Location
- Gold-Copper
- Easting
- 524332.6
- Northing
- 6869344
- CRS
- NAD83 z7
- Elevation
- 755 m
- Azimuth
- 350 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: No palladium was detected in this interval.
Negative factors
- No palladium detected
- True width not stated
Evidence · table
“0.00”
Context: 1.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Reported widths are 'drilled widths' not true widths and may not be indicative of the true grade, width and style of mineralization on the property.
Evidence · text
“(1) Reported widths are "drilled widths" not true widths and may not be indicative of the true grade, width and style of mineralization on the property.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.
Evidence · text
“QA/QC The drilling program was carried out under the supervision of Neil Pettigrew, M.Sc., P.Geo., Vice President of Exploration, and a Director of the Company. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in a secured locked facility in Whitehorse. Samples were transported in secure bags directly by Company staff from the logging facility at the onsite exploration camp, to the ALS Geochemistry ("ALS") lab in Whitehorse, Yukon. All samples are crushed to 2 millimeters with a 250-gram split pulverized to 105 microns. Analysis for PGEs is performed using a 30 grams fire assay with an ICP-MS finish and for Ni, Cu, and Co using 0.25 grams by 4 acid digestion with ICP-AES finish. Ni, Cu and Co samples over 1.0 wt% were re-analysed by ore grade methods using 4 acid digestion with ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance within the defined limits of the standard used before being released to the public.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 137.5 m
- To
- 138.6 m
- Intercept Depth
- 137.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:137.5-138.6
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.42Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 137.5 m
- To
- 138.6 m
- Intercept Depth
- 137.5 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:137.5-138.6
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-03Canalask · nickelGrade: 0.26Grade Unit: %Intercept: 46.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-03
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 46.5 m
- From
- 55 m
- To
- 101.5 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-03:55-101.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.26 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: CSK24-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-03Canalask · copperGrade: 0.02Grade Unit: %Intercept: 46.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-03
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 46.5 m
- From
- 55 m
- To
- 101.5 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-03:55-101.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: CSK24-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-03Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 46.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-03
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 46.5 m
- From
- 55 m
- To
- 101.5 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-03:55-101.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: CSK24-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-03Canalask · palladiumGrade: 0.14Grade Unit: g/tIntercept: 46.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-03
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 46.5 m
- From
- 55 m
- To
- 101.5 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-03:55-101.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.14 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.14”
Context: CSK24-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-03Canalask · platinumGrade: 0.07Grade Unit: g/tIntercept: 46.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-03
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 46.5 m
- From
- 55 m
- To
- 101.5 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-03:55-101.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.07 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.07”
Context: CSK24-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-03Canalask · goldGrade: 0.01Grade Unit: g/tIntercept: 46.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-03
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 46.5 m
- From
- 55 m
- To
- 101.5 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-03:55-101.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: CSK24-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.29Grade Unit: %Intercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 11.5 m
- From
- 66 m
- To
- 77.5 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:66-77.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.29 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.29 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.29”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.06Grade Unit: %Intercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 11.5 m
- From
- 66 m
- To
- 77.5 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:66-77.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 11.5 m
- From
- 66 m
- To
- 77.5 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:66-77.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.33Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 66 m
- To
- 77.5 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:66-77.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.33 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.33”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0.15Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 66 m
- To
- 77.5 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:66-77.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.15 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.15”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.02Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 66 m
- To
- 77.5 m
- Intercept Depth
- 66 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:66-77.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.32Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 4 m
- From
- 69 m
- To
- 73 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:69-73
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.32 % nickel is weak against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.32”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.07Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4 m
- From
- 69 m
- To
- 73 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:69-73
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 69 m
- To
- 73 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:69-73
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.43Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 69 m
- To
- 73 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:69-73
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.43 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.43”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0.18Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 69 m
- To
- 73 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:69-73
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.18 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.18”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.03Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 69 m
- To
- 73 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:69-73
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-04Canalask · nickelGrade: 0.3Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- CSK24-04
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 23 m
- From
- 93 m
- To
- 116 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-04:93-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 % nickel is weak against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: CSK24-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-04Canalask · copperGrade: 0.01Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- CSK24-04
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 23 m
- From
- 93 m
- To
- 116 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-04:93-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: CSK24-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-04Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- CSK24-04
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 23 m
- From
- 93 m
- To
- 116 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-04:93-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: CSK24-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-04Canalask · palladiumGrade: 0.15Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- CSK24-04
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 93 m
- To
- 116 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-04:93-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.15 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.15”
Context: CSK24-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-04Canalask · platinumGrade: 0.08Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- CSK24-04
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 93 m
- To
- 116 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-04:93-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.08 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.08”
Context: CSK24-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-04Canalask · goldGrade: 0.01Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- CSK24-04
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 93 m
- To
- 116 m
- Intercept Depth
- 93 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-04:93-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: CSK24-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.34Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 4 m
- From
- 112 m
- To
- 116 m
- Intercept Depth
- 112 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:112-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % nickel is weak against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 112 m
- To
- 116 m
- Intercept Depth
- 112 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:112-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.02Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4 m
- From
- 112 m
- To
- 116 m
- Intercept Depth
- 112 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:112-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.02 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.34Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 112 m
- To
- 116 m
- Intercept Depth
- 112 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:112-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.34 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.34”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0.14Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 112 m
- To
- 116 m
- Intercept Depth
- 112 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:112-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.14 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.14”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.01Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 112 m
- To
- 116 m
- Intercept Depth
- 112 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:112-116
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.57Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 1 m
- From
- 168 m
- To
- 169 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:168-169
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 % nickel is weak against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 168 m
- To
- 169 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:168-169
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 168 m
- To
- 169 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:168-169
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.02 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.92Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 168 m
- To
- 169 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:168-169
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.92 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.92”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0.41Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 168 m
- To
- 169 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:168-169
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.41 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.41”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 168 m
- To
- 169 m
- Intercept Depth
- 168 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:168-169
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.43Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 1 m
- From
- 170 m
- To
- 171 m
- Intercept Depth
- 170 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:170-171
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.43 % nickel is weak against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.43”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 170 m
- To
- 171 m
- Intercept Depth
- 170 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:170-171
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 170 m
- To
- 171 m
- Intercept Depth
- 170 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:170-171
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.02 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.46Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.46
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 170 m
- To
- 171 m
- Intercept Depth
- 170 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:170-171
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.46 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.46”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0.21Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 170 m
- To
- 171 m
- Intercept Depth
- 170 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:170-171
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.21 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.21”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 170 m
- To
- 171 m
- Intercept Depth
- 170 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:170-171
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · nickelGrade: 1.95Grade Unit: %Intercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.95
- Grade Unit
- %
- Intercept
- 33.5 m
- From
- 24.6 m
- To
- 58.1 m
- Intercept Depth
- 24.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-05:24.6-58.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 1.95 % nickel is strong against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 1.95 % nickel is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.95”
Context: CSK24-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · copperGrade: 0.05Grade Unit: %Intercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 33.5 m
- From
- 24.6 m
- To
- 58.1 m
- Intercept Depth
- 24.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-05:24.6-58.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.7 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: CSK24-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · cobaltGrade: 0.03Grade Unit: %Intercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 33.5 m
- From
- 24.6 m
- To
- 58.1 m
- Intercept Depth
- 24.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-05:24.6-58.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.03 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: CSK24-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · palladiumGrade: 0.44Grade Unit: g/tIntercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
- Intercept
- 33.5 m
- From
- 24.6 m
- To
- 58.1 m
- Intercept Depth
- 24.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-05:24.6-58.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.44 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.44”
Context: CSK24-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 33.5 m
- From
- 24.6 m
- To
- 58.1 m
- Intercept Depth
- 24.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-05:24.6-58.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: CSK24-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · goldGrade: 0.19Grade Unit: g/tIntercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 33.5 m
- From
- 24.6 m
- To
- 58.1 m
- Intercept Depth
- 24.6 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-05:24.6-58.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.4 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: CSK24-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 2.67Grade Unit: %Intercept: 11 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 2.67
- Grade Unit
- %
- Intercept
- 11 m
- From
- 28.1 m
- To
- 39.1 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:28.1-39.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 2.67 % nickel is strong against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 2.67 % nickel is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.67”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.12Grade Unit: %Intercept: 11 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 11 m
- From
- 28.1 m
- To
- 39.1 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:28.1-39.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.3 %·m is below.
Negative factors
- 0.12 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.04Grade Unit: %Intercept: 11 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 11 m
- From
- 28.1 m
- To
- 39.1 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:28.1-39.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.04 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.42Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 28.1 m
- To
- 39.1 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:28.1-39.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.42 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.42”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 28.1 m
- To
- 39.1 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:28.1-39.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.3Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 28.1 m
- To
- 39.1 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:28.1-39.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 4.08Grade Unit: %Intercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 4.08
- Grade Unit
- %
- Intercept
- 4.1 m
- From
- 33 m
- To
- 37.1 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:33-37.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 4.08 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 4.08 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.08”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.04Grade Unit: %Intercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 4.1 m
- From
- 33 m
- To
- 37.1 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:33-37.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.05Grade Unit: %Intercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 4.1 m
- From
- 33 m
- To
- 37.1 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:33-37.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.05 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.65Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.65
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 33 m
- To
- 37.1 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:33-37.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.65 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.65”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 33 m
- To
- 37.1 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:33-37.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.35Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 33 m
- To
- 37.1 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:33-37.1
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 4.15Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 4.15
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 51 m
- To
- 56.5 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:51-56.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 4.15 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 4.15 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.15”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.04Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 51 m
- To
- 56.5 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:51-56.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.07Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 51 m
- To
- 56.5 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:51-56.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.07 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.85Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 51 m
- To
- 56.5 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:51-56.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.85 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.85”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 51 m
- To
- 56.5 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:51-56.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.24Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 51 m
- To
- 56.5 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:51-56.5
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.3 g/t·m is below.
Negative factors
- 0.24 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 12.9Grade Unit: %Intercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 12.9
- Grade Unit
- %
- Intercept
- 0.2 m
- From
- 55.1 m
- To
- 55.3 m
- Intercept Depth
- 55.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:55.1-55.3
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 12.9 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 12.9 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.90”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.12Grade Unit: %Intercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.2 m
- From
- 55.1 m
- To
- 55.3 m
- Intercept Depth
- 55.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:55.1-55.3
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.12 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.23Grade Unit: %Intercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 0.2 m
- From
- 55.1 m
- To
- 55.3 m
- Intercept Depth
- 55.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:55.1-55.3
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % cobalt is moderate against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.01Grade Unit: g/tIntercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 0.2 m
- From
- 55.1 m
- To
- 55.3 m
- Intercept Depth
- 55.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:55.1-55.3
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.01 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 0.2 m
- From
- 55.1 m
- To
- 55.3 m
- Intercept Depth
- 55.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:55.1-55.3
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.81Grade Unit: g/tIntercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 0.2 m
- From
- 55.1 m
- To
- 55.3 m
- Intercept Depth
- 55.1 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:55.1-55.3
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.81 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.81”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.24Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 10 m
- From
- 77 m
- To
- 87 m
- Intercept Depth
- 77 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:77-87
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.24 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 10 m
- From
- 77 m
- To
- 87 m
- Intercept Depth
- 77 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:77-87
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 10 m
- From
- 77 m
- To
- 87 m
- Intercept Depth
- 77 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:77-87
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 77 m
- To
- 87 m
- Intercept Depth
- 77 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:77-87
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 77 m
- To
- 87 m
- Intercept Depth
- 77 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:77-87
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.02Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 77 m
- To
- 87 m
- Intercept Depth
- 77 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:77-87
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.08Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 87 m
- To
- 91.4 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:87-91.4
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.08 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.93Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.93
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 87 m
- To
- 91.4 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:87-91.4
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.93 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 4.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.93”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 87 m
- To
- 91.4 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:87-91.4
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 87 m
- To
- 91.4 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:87-91.4
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 87 m
- To
- 91.4 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:87-91.4
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.4Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 87 m
- To
- 91.4 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:87-91.4
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.4 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.40”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.05Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:89-90
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.05 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.89Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.89
- Grade Unit
- %
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:89-90
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.89 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.9 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.89”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:89-90
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:89-90
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:89-90
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 1.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Intercept Depth
- 89 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:89-90
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 1.2 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.20”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.25Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 117.4 m
- To
- 125 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-125
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.25 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.21Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 117.4 m
- To
- 125 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-125
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.6 %·m is below.
Negative factors
- 0.21 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.04Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 117.4 m
- To
- 125 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-125
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.04 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 117.4 m
- To
- 125 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-125
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 117.4 m
- To
- 125 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-125
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.03Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 117.4 m
- To
- 125 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-125
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 2.42Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 2.42
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 117.4 m
- To
- 117.9 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-117.9
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 2.42 % nickel is strong against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 2.42 % nickel is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.42”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 0.23Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 117.4 m
- To
- 117.9 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-117.9
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.23 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.16Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 117.4 m
- To
- 117.9 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-117.9
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % cobalt is moderate against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0.01Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 117.4 m
- To
- 117.9 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-117.9
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0.01 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 117.4 m
- To
- 117.9 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-117.9
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 0.15Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 117.4 m
- To
- 117.9 m
- Intercept Depth
- 117.4 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:117.4-117.9
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.15 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.01Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.1 m
- From
- 146.9 m
- To
- 153 m
- Intercept Depth
- 146.9 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:146.9-153
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.01 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 1.84Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.84
- Grade Unit
- %
- Intercept
- 6.1 m
- From
- 146.9 m
- To
- 153 m
- Intercept Depth
- 146.9 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:146.9-153
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 1.84 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 11.2 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 1.84 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.84”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.01Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.1 m
- From
- 146.9 m
- To
- 153 m
- Intercept Depth
- 146.9 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:146.9-153
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.01 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 146.9 m
- To
- 153 m
- Intercept Depth
- 146.9 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:146.9-153
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 146.9 m
- To
- 153 m
- Intercept Depth
- 146.9 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:146.9-153
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 1.17Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 1.17
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 146.9 m
- To
- 153 m
- Intercept Depth
- 146.9 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:146.9-153
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 1.17 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 7.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.17”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · nickelGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 149 m
- To
- 150 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:149-150
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % nickel is below against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- 0.02 % nickel is below the weak threshold (0.3 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · copperGrade: 2.4Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 2.4
- Grade Unit
- %
- Intercept
- 1 m
- From
- 149 m
- To
- 150 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:149-150
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 2.4 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 2.4 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.4 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.40”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · cobaltGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- cobalt
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 149 m
- To
- 150 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:149-150
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.02 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · palladiumGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- palladium
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 149 m
- To
- 150 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:149-150
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · platinumGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- platinum
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 149 m
- To
- 150 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:149-150
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“0.00”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-02Canalask · goldGrade: 3.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CSK24-02
- Project
- Canalask
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 149 m
- To
- 150 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- magmatic nickel-copper sulphide
- Sample Type
- drill
- Group ID
- CSK24-02:149-150
- Mining Method
- unknown
Location
- Location
- Main Zone
- CRS
- NAD83 z7
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Expanded from assay table. 3.1 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.1 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.1 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.10”
Context: Table 1: Assay Results: Canalask Project
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CSK24-05Canalask · nickelGrade: 2Grade Unit: %Intercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- CSK24-05
- Project
- Canalask
- Commodity
- nickel
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- GT
Geometry
- Grade
- 2
- Grade Unit
- %
- Intercept
- 33.5 m
Classification
- Sample Type
- drill
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2024-12-10T00:00:00.000Z
Reasoning: Explicit disclosure recovered from source prose.
Evidence · text
“CSK-24-05 returned 2.0% nickel over 33.5 meters”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.