Guardian Metal Resources PLC Announces Positive Tempiute Tungsten Drilling Results
Original announcement by orestocks on
- Company
- Guardian Metal Resources PLC
- Ticker
- GMTLF
- Exchange
- Unavailable
- Region
- Nevada, USA
- Primary commodity
- Tungsten
- Secondary commodities
- Zinc, Silver, Copper
- Document categories
- Drill results
- Extracted
- 2026-09-21 06:51:06 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Guardian Metal Resources PLC announced positive drilling results from its Tempiute Tungsten Project in Nevada, including a significant intersection of 92.0m at 0.34% WO3. These results from Phase II resource drilling, combined with regional exploration success, have prompted the company to accelerate underground rehabilitation to facilitate further drilling and advance towards a Mineral Resource estimate. The project is focused on re-establishing a secure U.S. tungsten supply chain.
Reasoning: Guardian Metal Resources announced positive drill results from its Tempiute Tungsten Project, with broad and high-grade tungsten intercepts, particularly a 92.0m intersection at 0.34% WO3. These results have prompted a decision to accelerate underground rehabilitation for more efficient drilling and future development, indicating significant progress towards a potential Mineral Resource estimate. However, true widths are not yet known, and the project remains exploration-stage.
Positive factors
- Broad and high-grade tungsten mineralization reported, including a 92.0m intersection at 0.34% WO3, which is strong for tungsten.
- Phase II drilling is focused on resource definition, aiming to support an initial Mineral Resource estimate.
- Decision to commence underground rehabilitation to facilitate more efficient drilling and potential mine development.
- Phase I regional drilling confirmed tungsten-rich zones beyond the historical mine footprint, indicating district potential.
- QA/QC procedures are disclosed, including certified labs and insertion of standards, duplicates, and blanks.
Negative factors
- True thicknesses of intercepts are not yet known, which may overstate actual widths.
- The project is still exploration-stage, and no Mineral Resource or Reserve has been estimated.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 196
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release explicitly states that samples were submitted to ISO9001 and ISO/IEC 17025 accredited laboratories (MSA Labs and ALS Laboratories) and that Guardian Metal's QA/QC program includes regular insertion of standards, duplicates, and blanks.
Evidence · text
“All samples were submitted to MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. Samples were analyzed using method IMS-300 and IMS-230. Guardian Metal's QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream with stringent review of all results.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that true thicknesses of all reported intercepts are not yet known.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Phase I regional exploration drilling confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint, indicating an extension of mineralization.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The Phase II resource drilling program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
Extracted facts
Stored fact records: 196. Some facts used in scoring do not have a stored record.
Drill Results (196)
TP26-042Tempiute · tungstenGrade: 0.21Grade Unit: % WO3Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.21
- Grade Unit
- % WO3
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten over a moderate length, contributing positively to the resource definition program. The grade is strong for a tungsten skarn deposit. However, the lack of true width information introduces some uncertainty.
Positive factors
- Good grade for tungsten in a skarn deposit.
- Moderate intercept length.
Negative factors
- True width not known.
Evidence · table
“0.21”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · zincGrade: 0.22Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.22”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · silverGrade: 2.03Grade Unit: ppmIntercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.03
- Grade Unit
- ppm
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“2.03”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is negligible and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Very low grade for copper.
Evidence · table
“0.010”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · tungstenGrade: 0.35Grade Unit: % WO3Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.35
- Grade Unit
- % WO3
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a higher-grade sub-interval within the broader TP26-042 intercept, reinforcing the positive nature of the mineralization. The grade is strong for a tungsten skarn deposit.
Positive factors
- Higher grade within a broader intercept.
Negative factors
- True width not known.
Evidence · table
“0.35”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · zincGrade: 0.55Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.55”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · silverGrade: 3.98Grade Unit: ppmIntercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.98
- Grade Unit
- ppm
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“3.98”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · copperGrade: 0.007Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.007
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is negligible and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Very low grade for copper.
Evidence · table
“0.007”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · tungstenGrade: 0.22Grade Unit: % WO3Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- % WO3
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten over a moderate length, contributing positively to the resource definition program. The grade is strong for a tungsten skarn deposit. However, the inclusion of an unsampled section and the lack of true width information introduce some uncertainty.
Positive factors
- Good grade for tungsten in a skarn deposit.
- Moderate intercept length.
Negative factors
- True width not known.
- Interval includes unsampled section, leading to a diluted grade.
Evidence · table
“0.22”
Context: 23.86 *
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.09”
Context: 23.86 *
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · silverGrade: 0.82Grade Unit: ppmIntercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.82”
Context: 23.86 *
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · copperGrade: 0.005Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.005
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is negligible and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Very low grade for copper.
Evidence · table
“0.005”
Context: 23.86 *
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · tungstenGrade: 0.29Grade Unit: % WO3Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.29
- Grade Unit
- % WO3
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a higher-grade sub-interval within the broader TP26-044 intercept, reinforcing the positive nature of the mineralization. The grade is strong for a tungsten skarn deposit.
Positive factors
- Higher grade within a broader intercept.
Negative factors
- True width not known.
Evidence · table
“0.29”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.14”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · silverGrade: 1.25Grade Unit: ppmIntercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.25
- Grade Unit
- ppm
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“1.25”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · copperGrade: 0.004Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.004
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is negligible and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Very low grade for copper.
Evidence · table
“0.004”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · tungstenGrade: 0.28Grade Unit: % WO3Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.28
- Grade Unit
- % WO3
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten, which is positive for the resource definition program. However, the narrow width makes it less material than broader intercepts. The grade is strong for a tungsten skarn deposit.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Relatively narrow intercept length.
- True width not known.
Evidence · table
“0.28”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · zincGrade: 0.08Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.08”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · silverGrade: 2.75Grade Unit: ppmIntercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.75
- Grade Unit
- ppm
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“2.75”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · copperGrade: 0.025Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.025
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- underground
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.025”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.27Grade Unit: % WO3Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.27
- Grade Unit
- % WO3
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten over a moderate length, contributing positively to the resource definition program. The grade is strong for a tungsten skarn deposit. However, the lack of true width information introduces some uncertainty.
Positive factors
- Good grade for tungsten in a skarn deposit.
- Moderate intercept length.
Negative factors
- True width not known.
Evidence · table
“0.27”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.28Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.28”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 0.84Grade Unit: ppmIntercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.84
- Grade Unit
- ppm
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.84”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.028”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.36Grade Unit: % WO3Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.36
- Grade Unit
- % WO3
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a higher-grade sub-interval within the broader TP26-046 intercept, reinforcing the positive nature of the mineralization. The grade is strong for a tungsten skarn deposit.
Positive factors
- Higher grade within a broader intercept.
Negative factors
- True width not known.
Evidence · table
“0.36”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.13”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 1.42Grade Unit: ppmIntercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.42
- Grade Unit
- ppm
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“1.42”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.028”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.31Grade Unit: % WO3Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.31
- Grade Unit
- % WO3
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten, which is positive for the resource definition program. However, the narrow width makes it less material than broader intercepts. The grade is strong for a tungsten skarn deposit.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Relatively narrow intercept length.
- True width not known.
Evidence · table
“0.31”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.54Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.54”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 0.47Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.47
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.47”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.040”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.34Grade Unit: % WO3Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.34
- Grade Unit
- % WO3
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a very significant intercept with a broad length and good tungsten grade, reinforcing the potential for a substantial resource. The grade is strong for a tungsten skarn deposit, and the length is exceptional.
Positive factors
- Exceptional intercept length for a skarn deposit.
- Good grade for tungsten in a skarn deposit.
Negative factors
- True width not known.
Evidence · table
“0.34”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.79Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.79”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 4.13Grade Unit: ppmIntercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 4.13
- Grade Unit
- ppm
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“4.13”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.049Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.049
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.049”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.33Grade Unit: % WO3Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.33
- Grade Unit
- % WO3
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a good grade sub-interval within the broader TP26-046 intercept, reinforcing the positive nature of the mineralization. The grade is strong for a tungsten skarn deposit.
Positive factors
- Good grade for tungsten in a skarn deposit.
- Moderate intercept length.
Negative factors
- True width not known.
Evidence · table
“0.33”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.34Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.34”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 1.11Grade Unit: ppmIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.11
- Grade Unit
- ppm
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“1.11”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.054Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.054
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.054”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.53Grade Unit: % WO3Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.53
- Grade Unit
- % WO3
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a high-grade sub-interval within the broader TP26-046 intercept, significantly enhancing the overall positive assessment. The grade is exceptional for a tungsten skarn deposit.
Positive factors
- High grade for tungsten in a skarn deposit.
- Moderate intercept length.
Negative factors
- True width not known.
Evidence · table
“0.53”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.11”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 0.61Grade Unit: ppmIntercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.61
- Grade Unit
- ppm
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.61”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.013Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.013
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.013”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.49Grade Unit: % WO3Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.49
- Grade Unit
- % WO3
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a high-grade sub-interval within the broader TP26-046 intercept, significantly enhancing the overall positive assessment. The grade is exceptional for a tungsten skarn deposit.
Positive factors
- High grade for tungsten in a skarn deposit.
Negative factors
- Relatively narrow intercept length.
- True width not known.
Evidence · table
“0.49”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.19Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.19”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 18.83Grade Unit: ppmIntercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 18.83
- Grade Unit
- ppm
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“18.83”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- underground
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.060”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP25-001Tempiute · tungstenGrade: 0.32Grade Unit: % WO3Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.32
- Grade Unit
- % WO3
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a good grade tungsten intercept from the Phase I exploration program, indicating mineralization in the Dead-Eye zone. The grade is strong for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.32”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-001Tempiute · zincGrade: 0.31Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.31”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-001Tempiute · silverGrade: 2.3Grade Unit: ppmIntercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.3
- Grade Unit
- ppm
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“2.30”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-001Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.02”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · tungstenGrade: 0.15Grade Unit: % WO3Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.15
- Grade Unit
- % WO3
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate grade of tungsten from the Phase I exploration program. The grade is moderate for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Moderate grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.15”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · zincGrade: 0.25Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.25”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · silverGrade: 0.86Grade Unit: ppmIntercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.86
- Grade Unit
- ppm
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.86”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · tungstenGrade: 0.26Grade Unit: % WO3Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.26
- Grade Unit
- % WO3
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a good grade tungsten intercept from the Phase I exploration program. The grade is strong for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.26”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.09”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · silverGrade: 0.82Grade Unit: ppmIntercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.82”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · tungstenGrade: 0.12Grade Unit: % WO3Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.12
- Grade Unit
- % WO3
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a weak grade of tungsten from the Phase I exploration program. The grade is weak for a tungsten skarn deposit, and the narrow width limits its individual materiality.
Positive factors
- Weak grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.12”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · zincGrade: 0.05Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.05”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.25”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · tungstenGrade: 0.17Grade Unit: % WO3Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.17
- Grade Unit
- % WO3
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate grade of tungsten from the Phase I exploration program. The grade is moderate for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Moderate grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.17”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · zincGrade: 0.46Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.46”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · silverGrade: 20.38Grade Unit: ppmIntercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 20.38
- Grade Unit
- ppm
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“20.38”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · tungstenGrade: 0.71Grade Unit: % WO3Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.71
- Grade Unit
- % WO3
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a high grade of tungsten from the Phase I exploration program, indicating strong mineralization. The grade is exceptional for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- High grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.71”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · zincGrade: 0.37Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.37”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · silverGrade: 28.4Grade Unit: ppmIntercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 28.4
- Grade Unit
- ppm
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“28.40”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.02”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · tungstenGrade: 0.27Grade Unit: % WO3Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.27
- Grade Unit
- % WO3
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten from the Phase I exploration program. The grade is strong for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.27”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.06”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · silverGrade: 3.16Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.16
- Grade Unit
- ppm
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“3.16”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · tungstenGrade: 0.1Grade Unit: % WO3Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.1
- Grade Unit
- % WO3
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a weak grade of tungsten from the Phase I exploration program. The grade is weak for a tungsten skarn deposit, and the narrow width limits its individual materiality.
Positive factors
- Weak grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.10”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · zincGrade: 0.04Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.04”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · silverGrade: 0.03Grade Unit: ppmIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.03
- Grade Unit
- ppm
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.03”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · tungstenGrade: 0.22Grade Unit: % WO3Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- % WO3
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten from the Phase I exploration program. The grade is strong for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.22”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · zincGrade: 0.21Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.21”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · silverGrade: 5.12Grade Unit: ppmIntercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 5.12
- Grade Unit
- ppm
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“5.12”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · copperGrade: 0.18Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is low and likely not economically significant. It is reported as a trace element and does not materially impact the overall positive assessment.
Negative factors
- Low grade for copper.
Evidence · table
“0.18”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-013Tempiute · tungstenGrade: 0.22Grade Unit: % WO3Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- % WO3
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Hole Depth
- 185.01 m
- Intercept Depth
- 69.19 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620782
- Northing
- 4167448
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 69 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good grade of tungsten from the Phase I exploration program. The grade is strong for a tungsten skarn deposit, but the narrow width limits its individual materiality.
Positive factors
- Good grade for tungsten in a skarn deposit.
Negative factors
- Narrow intercept length.
- True width not known.
Evidence · table
“0.22”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-013Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Hole Depth
- 185.01 m
- Intercept Depth
- 69.19 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620782
- Northing
- 4167448
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 69 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The zinc grade is low and likely not economically significant as a primary commodity, but it is a common byproduct in skarn deposits. Its presence is noted but does not materially impact the overall positive assessment of the tungsten intercept.
Negative factors
- Low grade for zinc.
Evidence · table
“0.11”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-013Tempiute · silverGrade: 0.5Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.5
- Grade Unit
- ppm
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Hole Depth
- 185.01 m
- Intercept Depth
- 69.19 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620782
- Northing
- 4167448
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 69 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The silver grade is very low and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Low grade for silver.
Evidence · table
“0.50”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-013Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Hole Depth
- 185.01 m
- Intercept Depth
- 69.19 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
- Mining Method
- underground
Location
- Location
- Dead-Eye
- Easting
- 620782
- Northing
- 4167448
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 69 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The copper grade is zero and not economically significant. It is reported as a trace element and does not contribute to the overall positive assessment.
Negative factors
- Zero grade for copper.
Evidence · table
“0.00”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
incl.Tempiute · zincGrade: 0.55Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Intercept Depth
- 211.91 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.8 %·m is below.
Negative factors
- 0.55 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 3.98Grade Unit: ppmIntercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.98
- Grade Unit
- ppm
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Intercept Depth
- 211.91 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.98 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.98”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.007Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.007
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Intercept Depth
- 211.91 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:211.91-218.85
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.007 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.007 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.007”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.8 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.25Grade Unit: ppmIntercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.25
- Grade Unit
- ppm
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.25”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.004Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.004
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:175.14-189.89
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.004 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.004 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.004”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Intercept Depth
- 70.1 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:70.1-80.55
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.42Grade Unit: ppmIntercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.42
- Grade Unit
- ppm
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Intercept Depth
- 70.1 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:70.1-80.55
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.42 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.42”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Intercept Depth
- 70.1 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:70.1-80.55
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.028 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.028 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.028”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.54Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Intercept Depth
- 85.94 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:85.94-91.8
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.2 %·m is below.
Negative factors
- 0.54 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.47Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.47
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Intercept Depth
- 85.94 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:85.94-91.8
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.47 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.47”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Intercept Depth
- 85.94 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:85.94-91.8
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.040”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.79Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:102.5-194.45
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.79 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 72.6 %·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.79”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 4.13Grade Unit: ppmIntercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 4.13
- Grade Unit
- ppm
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:102.5-194.45
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.13 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.049Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.049
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Intercept Depth
- 102.5 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:102.5-194.45
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.049 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 4.5 %·m is below.
Negative factors
- 0.049 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.049”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.34Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Intercept Depth
- 111.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:111.6-128
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.6 %·m is below.
Negative factors
- 0.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.11Grade Unit: ppmIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.11
- Grade Unit
- ppm
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Intercept Depth
- 111.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:111.6-128
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.11 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.11”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.054Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.054
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Intercept Depth
- 111.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:111.6-128
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.054 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.054 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.054”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Intercept Depth
- 170.5 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:170.5-183.2
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.11 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.61Grade Unit: ppmIntercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.61
- Grade Unit
- ppm
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Intercept Depth
- 170.5 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:170.5-183.2
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.61 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.61”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.013Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.013
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Intercept Depth
- 170.5 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:170.5-183.2
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.013 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.013 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.013”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.19Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Intercept Depth
- 188.36 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:188.36-193.5
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 18.83Grade Unit: ppmIntercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 18.83
- Grade Unit
- ppm
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Intercept Depth
- 188.36 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:188.36-193.5
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 18.83 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“18.83”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Intercept Depth
- 188.36 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:188.36-193.5
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.060”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-013Tempiute · zincGrade: 0.58Grade Unit: %Intercept: 2.37 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 2.37 m
- From
- 169.86 m
- To
- 172.23 m
- Intercept Depth
- 169.86 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-013:169.86-172.23
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.58 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.58 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.58”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-013Tempiute · silverGrade: 3.91Grade Unit: ppmIntercept: 2.37 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.91
- Grade Unit
- ppm
- Intercept
- 2.37 m
- From
- 169.86 m
- To
- 172.23 m
- Intercept Depth
- 169.86 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-013:169.86-172.23
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.91 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.91”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-013Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 2.37 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.37 m
- From
- 169.86 m
- To
- 172.23 m
- Intercept Depth
- 169.86 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-013:169.86-172.23
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · zincGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 96.86 m
- To
- 102.72 m
- Intercept Depth
- 96.86 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-014A:96.86-102.72
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-014A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · silverGrade: 0.5Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.5
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 96.86 m
- To
- 102.72 m
- Intercept Depth
- 96.86 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-014A:96.86-102.72
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.5 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.50”
Context: TP25-014A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · copperGrade: 0Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 96.86 m
- To
- 102.72 m
- Intercept Depth
- 96.86 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-014A:96.86-102.72
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-014A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · zincGrade: 0.14Grade Unit: %Intercept: 10.17 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 10.17 m
- From
- 132.3 m
- To
- 142.47 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-014A:132.3-142.47
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · silverGrade: 3.68Grade Unit: ppmIntercept: 10.17 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.68
- Grade Unit
- ppm
- Intercept
- 10.17 m
- From
- 132.3 m
- To
- 142.47 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-014A:132.3-142.47
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.68 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.68”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · copperGrade: 0Grade Unit: %Intercept: 10.17 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 10.17 m
- From
- 132.3 m
- To
- 142.47 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-014A:132.3-142.47
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-015Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 11.19 mView all detailsHide details
Identity
- Hole ID
- TP25-015
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 11.19 m
- From
- 94.51 m
- To
- 105.7 m
- Intercept Depth
- 94.51 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-015:94.51-105.7
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TP25-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-015Tempiute · silverGrade: 0.81Grade Unit: ppmIntercept: 11.19 mView all detailsHide details
Identity
- Hole ID
- TP25-015
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.81
- Grade Unit
- ppm
- Intercept
- 11.19 m
- From
- 94.51 m
- To
- 105.7 m
- Intercept Depth
- 94.51 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-015:94.51-105.7
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.81 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.81”
Context: TP25-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-015Tempiute · copperGrade: 0Grade Unit: %Intercept: 11.19 mView all detailsHide details
Identity
- Hole ID
- TP25-015
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 11.19 m
- From
- 94.51 m
- To
- 105.7 m
- Intercept Depth
- 94.51 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-015:94.51-105.7
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.5Grade Unit: %Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 2.25 m
- From
- 98.6 m
- To
- 100.85 m
- Intercept Depth
- 98.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:98.6-100.85
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.1 %·m is below.
Negative factors
- 0.5 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1Grade Unit: ppmIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 2.25 m
- From
- 98.6 m
- To
- 100.85 m
- Intercept Depth
- 98.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:98.6-100.85
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.25 m
- From
- 98.6 m
- To
- 100.85 m
- Intercept Depth
- 98.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:98.6-100.85
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.26Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 132.73 m
- To
- 135.03 m
- Intercept Depth
- 132.73 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:132.73-135.03
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.26 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.5Grade Unit: ppmIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.5
- Grade Unit
- ppm
- Intercept
- 2.3 m
- From
- 132.73 m
- To
- 135.03 m
- Intercept Depth
- 132.73 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:132.73-135.03
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.5 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 132.73 m
- To
- 135.03 m
- Intercept Depth
- 132.73 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:132.73-135.03
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.02Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 172.37 m
- To
- 174.82 m
- Intercept Depth
- 172.37 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:172.37-174.82
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.77Grade Unit: ppmIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.77
- Grade Unit
- ppm
- Intercept
- 2.45 m
- From
- 172.37 m
- To
- 174.82 m
- Intercept Depth
- 172.37 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:172.37-174.82
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.77 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.77”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 172.37 m
- To
- 174.82 m
- Intercept Depth
- 172.37 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:172.37-174.82
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 8.23 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 8.23 m
- From
- 0 m
- To
- 8.23 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-017:0-8.23
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.2 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: TP25-017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · silverGrade: 4.15Grade Unit: ppmIntercept: 8.23 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 4.15
- Grade Unit
- ppm
- Intercept
- 8.23 m
- From
- 0 m
- To
- 8.23 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-017:0-8.23
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.15 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.15”
Context: TP25-017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 8.23 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 8.23 m
- From
- 0 m
- To
- 8.23 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-017:0-8.23
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: TP25-017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 2.89 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.89 m
- From
- 63.25 m
- To
- 66.14 m
- Intercept Depth
- 63.25 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-017:63.25-66.14
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.09 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · silverGrade: 1Grade Unit: ppmIntercept: 2.89 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 2.89 m
- From
- 63.25 m
- To
- 66.14 m
- Intercept Depth
- 63.25 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-017:63.25-66.14
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.89 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.89 m
- From
- 63.25 m
- To
- 66.14 m
- Intercept Depth
- 63.25 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-017:63.25-66.14
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · zincGrade: 0.16Grade Unit: %Intercept: 2.24 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 2.24 m
- From
- 59 m
- To
- 61.24 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:59-61.24
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.16 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: TP25-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · silverGrade: 0.73Grade Unit: ppmIntercept: 2.24 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.73
- Grade Unit
- ppm
- Intercept
- 2.24 m
- From
- 59 m
- To
- 61.24 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:59-61.24
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.73 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.73”
Context: TP25-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.24 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.24 m
- From
- 59 m
- To
- 61.24 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:59-61.24
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · zincGrade: 0.1Grade Unit: %Intercept: 2.64 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 2.64 m
- From
- 88.72 m
- To
- 91.36 m
- Intercept Depth
- 88.72 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:88.72-91.36
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · silverGrade: 1Grade Unit: ppmIntercept: 2.64 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 2.64 m
- From
- 88.72 m
- To
- 91.36 m
- Intercept Depth
- 88.72 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:88.72-91.36
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.64 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.64 m
- From
- 88.72 m
- To
- 91.36 m
- Intercept Depth
- 88.72 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:88.72-91.36
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · zincGrade: 0.31Grade Unit: %Intercept: 4.32 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 4.32 m
- From
- 196.6 m
- To
- 200.92 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:196.6-200.92
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 0.31 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · silverGrade: 1.13Grade Unit: ppmIntercept: 4.32 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.13
- Grade Unit
- ppm
- Intercept
- 4.32 m
- From
- 196.6 m
- To
- 200.92 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:196.6-200.92
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.13 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · copperGrade: 0Grade Unit: %Intercept: 4.32 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 4.32 m
- From
- 196.6 m
- To
- 200.92 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-019:196.6-200.92
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-020ATempiute · zincGrade: 0.37Grade Unit: %Intercept: 8.79 mView all detailsHide details
Identity
- Hole ID
- TP25-020A
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 8.79 m
- From
- 183.64 m
- To
- 192.43 m
- Intercept Depth
- 183.64 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-020A:183.64-192.43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.3 %·m is below.
Negative factors
- 0.37 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: TP25-020A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-020ATempiute · silverGrade: 118.28Grade Unit: ppmIntercept: 8.79 mView all detailsHide details
Identity
- Hole ID
- TP25-020A
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 118.28
- Grade Unit
- ppm
- Intercept
- 8.79 m
- From
- 183.64 m
- To
- 192.43 m
- Intercept Depth
- 183.64 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-020A:183.64-192.43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 118.28 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“118.28”
Context: TP25-020A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-020ATempiute · copperGrade: 0.04Grade Unit: %Intercept: 8.79 mView all detailsHide details
Identity
- Hole ID
- TP25-020A
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 8.79 m
- From
- 183.64 m
- To
- 192.43 m
- Intercept Depth
- 183.64 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-020A:183.64-192.43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-020A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.07Grade Unit: %Intercept: 2.13 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 2.13 m
- From
- 186.64 m
- To
- 188.77 m
- Intercept Depth
- 186.64 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:186.64-188.77
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 2.13 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 2.13 m
- From
- 186.64 m
- To
- 188.77 m
- Intercept Depth
- 186.64 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:186.64-188.77
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.25”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.13 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.13 m
- From
- 186.64 m
- To
- 188.77 m
- Intercept Depth
- 186.64 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:186.64-188.77
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-021Tempiute · zincGrade: 0.27Grade Unit: %Intercept: 32.42 mView all detailsHide details
Identity
- Hole ID
- TP25-021
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 32.42 m
- From
- 293.72 m
- To
- 326.14 m
- Intercept Depth
- 293.72 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-021:293.72-326.14
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 8.8 %·m is below.
Negative factors
- 0.27 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: TP25-021
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-021Tempiute · silverGrade: 0.33Grade Unit: ppmIntercept: 32.42 mView all detailsHide details
Identity
- Hole ID
- TP25-021
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.33
- Grade Unit
- ppm
- Intercept
- 32.42 m
- From
- 293.72 m
- To
- 326.14 m
- Intercept Depth
- 293.72 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-021:293.72-326.14
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.33 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.33”
Context: TP25-021
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-021Tempiute · copperGrade: 0Grade Unit: %Intercept: 32.42 mView all detailsHide details
Identity
- Hole ID
- TP25-021
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 32.42 m
- From
- 293.72 m
- To
- 326.14 m
- Intercept Depth
- 293.72 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-021:293.72-326.14
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-021
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.5Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 306.93 m
- To
- 308.63 m
- Intercept Depth
- 306.93 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:306.93-308.63
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.5 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.7Grade Unit: ppmIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.7
- Grade Unit
- ppm
- Intercept
- 1.7 m
- From
- 306.93 m
- To
- 308.63 m
- Intercept Depth
- 306.93 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:306.93-308.63
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.7 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.70”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 306.93 m
- To
- 308.63 m
- Intercept Depth
- 306.93 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:306.93-308.63
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-026Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 3.66 mView all detailsHide details
Identity
- Hole ID
- TP25-026
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 3.66 m
- From
- 0.61 m
- To
- 4.27 m
- Intercept Depth
- 0.61 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-026:0.61-4.27
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: TP25-026
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-026Tempiute · silverGrade: 0.99Grade Unit: ppmIntercept: 3.66 mView all detailsHide details
Identity
- Hole ID
- TP25-026
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.99
- Grade Unit
- ppm
- Intercept
- 3.66 m
- From
- 0.61 m
- To
- 4.27 m
- Intercept Depth
- 0.61 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-026:0.61-4.27
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.99 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.99”
Context: TP25-026
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-026Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 3.66 mView all detailsHide details
Identity
- Hole ID
- TP25-026
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 3.66 m
- From
- 0.61 m
- To
- 4.27 m
- Intercept Depth
- 0.61 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-026:0.61-4.27
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-026
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · zincGrade: 0.52Grade Unit: %Intercept: 3.68 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 3.68 m
- From
- 28.32 m
- To
- 32 m
- Intercept Depth
- 28.32 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:28.32-32
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.52 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.52 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.52”
Context: TP25-027
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · silverGrade: 1.53Grade Unit: ppmIntercept: 3.68 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.53
- Grade Unit
- ppm
- Intercept
- 3.68 m
- From
- 28.32 m
- To
- 32 m
- Intercept Depth
- 28.32 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:28.32-32
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.53 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.53”
Context: TP25-027
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 3.68 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3.68 m
- From
- 28.32 m
- To
- 32 m
- Intercept Depth
- 28.32 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:28.32-32
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TP25-027
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 5.03 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.03 m
- From
- 36.73 m
- To
- 41.76 m
- Intercept Depth
- 36.73 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:36.73-41.76
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · silverGrade: 4.66Grade Unit: ppmIntercept: 5.03 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 4.66
- Grade Unit
- ppm
- Intercept
- 5.03 m
- From
- 36.73 m
- To
- 41.76 m
- Intercept Depth
- 36.73 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:36.73-41.76
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.66 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.66”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · copperGrade: 0.26Grade Unit: %Intercept: 5.03 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 5.03 m
- From
- 36.73 m
- To
- 41.76 m
- Intercept Depth
- 36.73 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:36.73-41.76
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · zincGrade: 0.1Grade Unit: %Intercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1.58 m
- From
- 42.37 m
- To
- 43.95 m
- Intercept Depth
- 42.37 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:42.37-43.95
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · silverGrade: 2.18Grade Unit: ppmIntercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.18
- Grade Unit
- ppm
- Intercept
- 1.58 m
- From
- 42.37 m
- To
- 43.95 m
- Intercept Depth
- 42.37 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:42.37-43.95
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 2.18 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“2.18”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · copperGrade: 0.09Grade Unit: %Intercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.58 m
- From
- 42.37 m
- To
- 43.95 m
- Intercept Depth
- 42.37 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-027:42.37-43.95
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-028Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 18.46 mView all detailsHide details
Identity
- Hole ID
- TP25-028
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 18.46 m
- From
- 24.54 m
- To
- 43 m
- Intercept Depth
- 24.54 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-028:24.54-43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.1 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP25-028
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-028Tempiute · silverGrade: 1.67Grade Unit: ppmIntercept: 18.46 mView all detailsHide details
Identity
- Hole ID
- TP25-028
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.67
- Grade Unit
- ppm
- Intercept
- 18.46 m
- From
- 24.54 m
- To
- 43 m
- Intercept Depth
- 24.54 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-028:24.54-43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.67 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.67”
Context: TP25-028
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-028Tempiute · copperGrade: 0.12Grade Unit: %Intercept: 18.46 mView all detailsHide details
Identity
- Hole ID
- TP25-028
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 18.46 m
- From
- 24.54 m
- To
- 43 m
- Intercept Depth
- 24.54 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP25-028:24.54-43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 2.2 %·m is below.
Negative factors
- 0.12 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: TP25-028
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 4.03 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 4.03 m
- From
- 27.13 m
- To
- 31.16 m
- Intercept Depth
- 27.13 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:27.13-31.16
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.89Grade Unit: ppmIntercept: 4.03 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.89
- Grade Unit
- ppm
- Intercept
- 4.03 m
- From
- 27.13 m
- To
- 31.16 m
- Intercept Depth
- 27.13 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:27.13-31.16
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.89 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.89”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.07Grade Unit: %Intercept: 4.03 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4.03 m
- From
- 27.13 m
- To
- 31.16 m
- Intercept Depth
- 27.13 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:27.13-31.16
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
plusTempiute · zincGrade: 0.03Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- plus
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 39.6 m
- To
- 43 m
- Intercept Depth
- 39.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- plus:39.6-43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: plus
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
plusTempiute · silverGrade: 1.08Grade Unit: ppmIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- plus
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.08
- Grade Unit
- ppm
- Intercept
- 3.4 m
- From
- 39.6 m
- To
- 43 m
- Intercept Depth
- 39.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- plus:39.6-43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.08 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.08”
Context: plus
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
plusTempiute · copperGrade: 0.09Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- plus
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 39.6 m
- To
- 43 m
- Intercept Depth
- 39.6 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- plus:39.6-43
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: plus
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-030Tempiute · zincGrade: 0.07Grade Unit: %Intercept: 6.71 mView all detailsHide details
Identity
- Hole ID
- TP26-030
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 6.71 m
- From
- 40.08 m
- To
- 46.79 m
- Intercept Depth
- 40.08 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-030:40.08-46.79
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: TP26-030
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-030Tempiute · silverGrade: 1.98Grade Unit: ppmIntercept: 6.71 mView all detailsHide details
Identity
- Hole ID
- TP26-030
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.98
- Grade Unit
- ppm
- Intercept
- 6.71 m
- From
- 40.08 m
- To
- 46.79 m
- Intercept Depth
- 40.08 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-030:40.08-46.79
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.98 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.98”
Context: TP26-030
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-030Tempiute · copperGrade: 0.13Grade Unit: %Intercept: 6.71 mView all detailsHide details
Identity
- Hole ID
- TP26-030
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 6.71 m
- From
- 40.08 m
- To
- 46.79 m
- Intercept Depth
- 40.08 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-030:40.08-46.79
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.13 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TP26-030
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-031Tempiute · zincGrade: 0.5Grade Unit: %Intercept: 14.01 mView all detailsHide details
Identity
- Hole ID
- TP26-031
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 14.01 m
- From
- 59.45 m
- To
- 73.46 m
- Intercept Depth
- 59.45 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-031:59.45-73.46
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 7.0 %·m is below.
Negative factors
- 0.5 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: TP26-031
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-031Tempiute · silverGrade: 4.72Grade Unit: ppmIntercept: 14.01 mView all detailsHide details
Identity
- Hole ID
- TP26-031
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 4.72
- Grade Unit
- ppm
- Intercept
- 14.01 m
- From
- 59.45 m
- To
- 73.46 m
- Intercept Depth
- 59.45 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-031:59.45-73.46
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.72 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.72”
Context: TP26-031
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-031Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 14.01 mView all detailsHide details
Identity
- Hole ID
- TP26-031
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 14.01 m
- From
- 59.45 m
- To
- 73.46 m
- Intercept Depth
- 59.45 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-031:59.45-73.46
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP26-031
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.46Grade Unit: %Intercept: 5.77 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 5.77 m
- From
- 67.69 m
- To
- 73.46 m
- Intercept Depth
- 67.69 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:67.69-73.46
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.46 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.7 %·m is below.
Negative factors
- 0.46 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.46”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 8.07Grade Unit: ppmIntercept: 5.77 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 8.07
- Grade Unit
- ppm
- Intercept
- 5.77 m
- From
- 67.69 m
- To
- 73.46 m
- Intercept Depth
- 67.69 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:67.69-73.46
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 8.07 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“8.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.09Grade Unit: %Intercept: 5.77 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 5.77 m
- From
- 67.69 m
- To
- 73.46 m
- Intercept Depth
- 67.69 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- incl.:67.69-73.46
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-039Tempiute · zincGrade: 3.88Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP26-039
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.88
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 297.83 m
- To
- 301.4 m
- Intercept Depth
- 297.83 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-039:297.83-301.4
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 3.88 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 13.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.88”
Context: TP26-039
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-039Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP26-039
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 3.57 m
- From
- 297.83 m
- To
- 301.4 m
- Intercept Depth
- 297.83 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-039:297.83-301.4
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.25”
Context: TP26-039
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-039Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP26-039
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 297.83 m
- To
- 301.4 m
- Intercept Depth
- 297.83 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-039:297.83-301.4
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TP26-039
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-041Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- TP26-041
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-041:3-6
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP26-041
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-041Tempiute · silverGrade: 1.18Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TP26-041
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.18
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-041:3-6
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.18 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.18”
Context: TP26-041
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-041Tempiute · copperGrade: 0.03Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- TP26-041
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Deposit Type
- skarn
- Sample Type
- drill
- Group ID
- TP26-041:3-6
- Mining Method
- underground
Location
- Location
- South Thumb
- CRS
- NAD83/ UTM Zone 11N Datum
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TP26-041
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.