Gungnir Drills 6.10 Metres of 2.47% Nickel Including Peak Assay of 7.36% Nickel and Hits Main Zone 100 Metres Below Lappvattnet Nickel Resource
Original announcement by tmx on
- Company
- Gungnir Resources Inc.
- Ticker
- GUG
- Exchange
- TSX
- Region
- northern Sweden
- Primary commodity
- Nickel
- Secondary commodities
- Copper, Cobalt, Platinum, Palladium, Gold
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-18 03:24:18 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Gungnir Resources reported high-grade nickel drill results from its Lappvattnet deposit in northern Sweden, including 6.10 metres of 2.47% nickel with a peak assay of 7.36% nickel. The drilling successfully expanded the Main Zone 100 metres below the current resource and further defined the recently discovered Footwall Zone. The company also highlighted its existing Inferred nickel resources at Lappvattnet and Rormyrberget, both compliant with NI 43-101 standards.
Reasoning: The document reports high-grade nickel drill results, including bonanza intercepts, that expand the known mineralization and identify a new Footwall Zone, indicating significant upside potential for the Lappvattnet deposit. The existing resources are Inferred, but the new drilling aims to expand and define them. QA/QC is disclosed and a QP has signed off, adding credibility.
Positive factors
- High-grade nickel intercepts, including bonanza grades
- Expansion of mineralization below existing resource
- Discovery of new Footwall Zone with significant intercepts
- Good continuity of mineralization
- QA/QC procedures disclosed and QP signed off
Negative factors
- True width is estimated, not precisely measured
- Existing resources are entirely Inferred
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 86
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Drill hole LAP23-01 returned 0.55 metres of 7.36% Ni, which is an exceptionally high grade for nickel.
Evidence · table
“7.36”
Context: 0.55
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The drill results table includes 'ETW %' (Estimated True Width as a percentage of core length) for each intercept, allowing for calculation of estimated true width.
Evidence · table
“ETW %”
Context: Length (m)
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release states that blanks, certified standards, and duplicates are routinely included in sample batches for quality assurance and control.
Evidence · text
“Blanks, certified standards and duplicates are routinely included in sample batches for quality assurance and control.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The Main Zone intercept in drill hole LAP23-08 is located approximately 100 metres below the current nickel resource, indicating an extension of mineralization.
Evidence · text
“Main Zone intercept 100 metres below current nickel resource”
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: Both Lappvattnet and Rormyrberget deposits are reported with Inferred Mineral Resources.
Evidence · text
“Lappvattnet: Inferred Resource of 780,000 tonnes grading 1.35% nickel”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The technical information and resource estimates are stated to be prepared in compliance with NI 43-101.
Evidence · text
“The NI 43-101 Technical Report entitled "TECHNICAL REPORT on the LAPPVATTNET and RORMYRBERGET DEPOSITS, NORTHERN SWEDEN"”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Jari Paakki, P.Geo., CEO, and a director of the Company, is stated as a Qualified Person under National Instrument 43-101 and has approved the technical information.
Evidence · text
“The technical information in this news release has been prepared, verified and approved by Jari Paakki, P.Geo., CEO, and a director of the Company. Mr. Paakki is a Qualified Person under National Instrument 43-101.”
Extracted facts
Stored fact records: 86. Some facts used in scoring do not have a stored record.
Drill Results (85)
LAP23-01Lappvattnet · nickelGrade: 1.88Grade Unit: %Intercept: 8.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 1.88
- Grade Unit
- %
- Intercept
- 8.9 m
- True Width
- 8.01 m
- From
- 66 m
- To
- 74.9 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-74.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a strong nickel grade over a good length, contributing positively to the deposit's potential.
Positive factors
- Strong nickel grade
- Good intercept length
- Estimated true width disclosed
Evidence · table
“1.88”
Context: 8.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · copperGrade: 0.2Grade Unit: %Intercept: 8.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 8.9 m
- True Width
- 8.01 m
- From
- 66 m
- To
- 74.9 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-74.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is present but not the primary focus or particularly high, acting as a byproduct.
Evidence · table
“0.20”
Context: 8.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · cobaltGrade: 0.03Grade Unit: %Intercept: 8.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 8.9 m
- True Width
- 8.01 m
- From
- 66 m
- To
- 74.9 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-74.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is low, likely a minor byproduct.
Evidence · table
“0.03”
Context: 8.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · platinum group elementsGrade: 0.18Grade Unit: g/tIntercept: 8.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 8.9 m
- True Width
- 8.01 m
- From
- 66 m
- To
- 74.9 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-74.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.18”
Context: 8.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · nickelGrade: 2.47Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 2.47
- Grade Unit
- %
- Intercept
- 6.1 m
- True Width
- 5.49 m
- From
- 66 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This high-grade nickel intercept is a significant highlight, demonstrating strong mineralization within the Main Zone.
Positive factors
- High-grade nickel intercept
- Good intercept length
- Estimated true width disclosed
Evidence · table
“2.47”
Context: 6.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · copperGrade: 0.25Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 6.1 m
- True Width
- 5.49 m
- From
- 66 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is present but not the primary focus or particularly high, acting as a byproduct.
Evidence · table
“0.25”
Context: 6.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · cobaltGrade: 0.04Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 6.1 m
- True Width
- 5.49 m
- From
- 66 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is low, likely a minor byproduct.
Evidence · table
“0.04”
Context: 6.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · platinum group elementsGrade: 0.24Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 6.1 m
- True Width
- 5.49 m
- From
- 66 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:66-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.24”
Context: 6.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · nickelGrade: 4.81Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 4.81
- Grade Unit
- %
- Intercept
- 2.75 m
- True Width
- 2.475 m
- From
- 69.35 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This very high-grade nickel intercept over a moderate length is a strong positive, indicating a high-quality core within the mineralization.
Positive factors
- Very high-grade nickel intercept
- Estimated true width disclosed
Evidence · table
“4.81”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · copperGrade: 0.24Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 2.75 m
- True Width
- 2.475 m
- From
- 69.35 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is present but not the primary focus or particularly high, acting as a byproduct.
Evidence · table
“0.24”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · cobaltGrade: 0.08Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 2.75 m
- True Width
- 2.475 m
- From
- 69.35 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is present as a byproduct, contributing to the overall value.
Evidence · table
“0.08”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · platinum group elementsGrade: 0.45Grade Unit: g/tIntercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 2.75 m
- True Width
- 2.475 m
- From
- 69.35 m
- To
- 72.1 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.45”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.475
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · nickelGrade: 7.36Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 7.36
- Grade Unit
- %
- Intercept
- 0.55 m
- True Width
- 0.495 m
- From
- 69.93 m
- To
- 70.48 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This exceptionally high-grade nickel intercept, though narrow, represents a bonanza grade and is a significant positive for the project.
Positive factors
- Bonanza nickel grade
- Estimated true width disclosed
Evidence · table
“7.36”
Context: 0.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.495
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · copperGrade: 0.02Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.55 m
- True Width
- 0.495 m
- From
- 69.93 m
- To
- 70.48 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is very low, not a significant contributor.
Evidence · table
“0.02”
Context: 0.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.495
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · cobaltGrade: 0.12Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.55 m
- True Width
- 0.495 m
- From
- 69.93 m
- To
- 70.48 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is present as a byproduct, contributing to the overall value.
Evidence · table
“0.12”
Context: 0.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.495
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-01Lappvattnet · platinum group elementsGrade: 0.25Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LAP23-01
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 0.55 m
- True Width
- 0.495 m
- From
- 69.93 m
- To
- 70.48 m
- Hole Depth
- 150 m
- Intercept Depth
- 69.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-01:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -55 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.25”
Context: 0.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.495
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · nickelGrade: 0.67Grade Unit: %Intercept: 7.8 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 7.8 m
- True Width
- 4.68 m
- From
- 110 m
- To
- 117.8 m
- Hole Depth
- 210 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:110-117.8
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade over a good length, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Good intercept length
- Estimated true width disclosed
Evidence · table
“0.67”
Context: 7.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.68
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · copperGrade: 0.21Grade Unit: %Intercept: 7.8 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 7.8 m
- True Width
- 4.68 m
- From
- 110 m
- To
- 117.8 m
- Hole Depth
- 210 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:110-117.8
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is present but not the primary focus or particularly high, acting as a byproduct.
Evidence · table
“0.21”
Context: 7.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.68
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · cobaltGrade: 0.01Grade Unit: %Intercept: 7.8 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 7.8 m
- True Width
- 4.68 m
- From
- 110 m
- To
- 117.8 m
- Hole Depth
- 210 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:110-117.8
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 7.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.68
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · platinum group elementsGrade: 0.16Grade Unit: g/tIntercept: 7.8 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 7.8 m
- True Width
- 4.68 m
- From
- 110 m
- To
- 117.8 m
- Hole Depth
- 210 m
- Intercept Depth
- 110 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:110-117.8
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.16”
Context: 7.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.68
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · nickelGrade: 0.56Grade Unit: %Intercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.56
- Grade Unit
- %
- Intercept
- 16.9 m
- True Width
- 10.14 m
- From
- 131 m
- To
- 147.9 m
- Hole Depth
- 210 m
- Intercept Depth
- 131 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:131-147.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept in the Footwall Zone is significant due to its length and moderate nickel grade, indicating potential for this newly defined zone.
Positive factors
- Good intercept length in new Footwall Zone
- Moderate nickel grade
- Estimated true width disclosed
Evidence · table
“0.56”
Context: 16.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · copperGrade: 0.08Grade Unit: %Intercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 16.9 m
- True Width
- 10.14 m
- From
- 131 m
- To
- 147.9 m
- Hole Depth
- 210 m
- Intercept Depth
- 131 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:131-147.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is low, likely a minor byproduct.
Evidence · table
“0.08”
Context: 16.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · cobaltGrade: 0.01Grade Unit: %Intercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 16.9 m
- True Width
- 10.14 m
- From
- 131 m
- To
- 147.9 m
- Hole Depth
- 210 m
- Intercept Depth
- 131 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:131-147.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 16.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-02Lappvattnet · platinum group elementsGrade: 0.13Grade Unit: g/tIntercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-02
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 16.9 m
- True Width
- 10.14 m
- From
- 131 m
- To
- 147.9 m
- Hole Depth
- 210 m
- Intercept Depth
- 131 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-02:131-147.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741710
- Northing
- 7165216
- Azimuth
- 335 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.13”
Context: 16.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · nickelGrade: 0.89Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.89
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 6.3 m
- From
- 116 m
- To
- 123 m
- Hole Depth
- 199 m
- Intercept Depth
- 116 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:116-123
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade over a good length, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Good intercept length
- Estimated true width disclosed
Evidence · table
“0.89”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · copperGrade: 0.14Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 6.3 m
- From
- 116 m
- To
- 123 m
- Hole Depth
- 199 m
- Intercept Depth
- 116 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:116-123
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is low, likely a minor byproduct.
Evidence · table
“0.14”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · cobaltGrade: 0.02Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 6.3 m
- From
- 116 m
- To
- 123 m
- Hole Depth
- 199 m
- Intercept Depth
- 116 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:116-123
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.02”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · platinum group elementsGrade: 0.1Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 6.3 m
- From
- 116 m
- To
- 123 m
- Hole Depth
- 199 m
- Intercept Depth
- 116 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:116-123
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.10”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · nickelGrade: 3.97Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 3.97
- Grade Unit
- %
- Intercept
- 0.9 m
- True Width
- 0.81 m
- From
- 121.6 m
- To
- 122.5 m
- Hole Depth
- 199 m
- Intercept Depth
- 121.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This high-grade nickel intercept, though narrow, indicates strong mineralization within the Main Zone.
Positive factors
- High-grade nickel intercept
- Estimated true width disclosed
Evidence · table
“3.97”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · copperGrade: 0.23Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 0.9 m
- True Width
- 0.81 m
- From
- 121.6 m
- To
- 122.5 m
- Hole Depth
- 199 m
- Intercept Depth
- 121.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is present but not the primary focus or particularly high, acting as a byproduct.
Evidence · table
“0.23”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · cobaltGrade: 0.07Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.9 m
- True Width
- 0.81 m
- From
- 121.6 m
- To
- 122.5 m
- Hole Depth
- 199 m
- Intercept Depth
- 121.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is present as a byproduct, contributing to the overall value.
Evidence · table
“0.07”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-03Lappvattnet · platinum group elementsGrade: 0.24Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-03
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.81 m
- From
- 121.6 m
- To
- 122.5 m
- Hole Depth
- 199 m
- Intercept Depth
- 121.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-03:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741839
- Northing
- 7165215
- Azimuth
- 335 °
- Dip
- -52 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.24”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-05Lappvattnet · nickelGrade: 0.23Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-05
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 3.85 m
- From
- 249 m
- To
- 256 m
- Hole Depth
- 303 m
- Intercept Depth
- 249 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-05:249-256
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741840
- Northing
- 7165214
- Azimuth
- 335 °
- Dip
- -80 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept in the Footwall Zone is notable for its length, but the nickel grade is relatively low.
Positive factors
- Good intercept length in new Footwall Zone
- Estimated true width disclosed
Negative factors
- Low nickel grade
Evidence · table
“0.23”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-05Lappvattnet · copperGrade: 0.09Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-05
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 3.85 m
- From
- 249 m
- To
- 256 m
- Hole Depth
- 303 m
- Intercept Depth
- 249 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-05:249-256
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741840
- Northing
- 7165214
- Azimuth
- 335 °
- Dip
- -80 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is very low, not a significant contributor.
Evidence · table
“0.09”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-05Lappvattnet · cobaltGrade: 0.01Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-05
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 3.85 m
- From
- 249 m
- To
- 256 m
- Hole Depth
- 303 m
- Intercept Depth
- 249 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-05:249-256
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741840
- Northing
- 7165214
- Azimuth
- 335 °
- Dip
- -80 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-05Lappvattnet · platinum group elementsGrade: 0.08Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- LAP23-05
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 3.85 m
- From
- 249 m
- To
- 256 m
- Hole Depth
- 303 m
- Intercept Depth
- 249 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-05:249-256
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741840
- Northing
- 7165214
- Azimuth
- 335 °
- Dip
- -80 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.08”
Context: 7.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · nickelGrade: 0.51Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 7.4 m
- True Width
- 6.29 m
- From
- 130 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 130 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:130-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade over a good length, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Good intercept length
- Estimated true width disclosed
Evidence · table
“0.51”
Context: 7.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · copperGrade: 0.3Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 7.4 m
- True Width
- 6.29 m
- From
- 130 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 130 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:130-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is present as a byproduct, contributing to the overall value.
Evidence · table
“0.30”
Context: 7.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · cobaltGrade: 0.01Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 7.4 m
- True Width
- 6.29 m
- From
- 130 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 130 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:130-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 7.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · platinum group elementsGrade: 0.01Grade Unit: g/tIntercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 7.4 m
- True Width
- 6.29 m
- From
- 130 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 130 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:130-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 7.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · nickelGrade: 1.05Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 1.05
- Grade Unit
- %
- Intercept
- 2.3 m
- True Width
- 1.955 m
- From
- 135.1 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 135.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade over a good length, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Estimated true width disclosed
Evidence · table
“1.05”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.955
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · copperGrade: 0.59Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 2.3 m
- True Width
- 1.955 m
- From
- 135.1 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 135.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is moderate, contributing to the overall value.
Positive factors
- Moderate copper grade
Evidence · table
“0.59”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.955
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · cobaltGrade: 0.02Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.3 m
- True Width
- 1.955 m
- From
- 135.1 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 135.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.02”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.955
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · platinum group elementsGrade: 0.03Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 2.3 m
- True Width
- 1.955 m
- From
- 135.1 m
- To
- 137.4 m
- Hole Depth
- 250 m
- Intercept Depth
- 135.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.03”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.955
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · nickelGrade: 1.25Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 1.25
- Grade Unit
- %
- Intercept
- 0.35 m
- True Width
- 0.2975 m
- From
- 136.3 m
- To
- 136.65 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Estimated true width disclosed
Evidence · table
“1.25”
Context: 0.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2975
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · copperGrade: 2.19Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 2.19
- Grade Unit
- %
- Intercept
- 0.35 m
- True Width
- 0.2975 m
- From
- 136.3 m
- To
- 136.65 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade, contributing significantly to the overall value.
Positive factors
- Strong copper grade
Evidence · table
“2.19”
Context: 0.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2975
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · cobaltGrade: 0.02Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.35 m
- True Width
- 0.2975 m
- From
- 136.3 m
- To
- 136.65 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.02”
Context: 0.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2975
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · platinum group elementsGrade: 0.17Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 0.35 m
- True Width
- 0.2975 m
- From
- 136.3 m
- To
- 136.65 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.17”
Context: 0.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2975
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · nickelGrade: 4.73Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 4.73
- Grade Unit
- %
- Intercept
- 0.25 m
- True Width
- 0.2125 m
- From
- 136.65 m
- To
- 136.9 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This very high-grade nickel intercept, though narrow, indicates a high-quality core within the mineralization.
Positive factors
- Very high-grade nickel intercept
- Estimated true width disclosed
Evidence · table
“4.73”
Context: 0.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · copperGrade: 0.06Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.25 m
- True Width
- 0.2125 m
- From
- 136.65 m
- To
- 136.9 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is very low, not a significant contributor.
Evidence · table
“0.06”
Context: 0.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · cobaltGrade: 0.12Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.25 m
- True Width
- 0.2125 m
- From
- 136.65 m
- To
- 136.9 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is present as a byproduct, contributing to the overall value.
Evidence · table
“0.12”
Context: 0.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-07Lappvattnet · platinum group elementsGrade: 0.3Grade Unit: g/tIntercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- LAP23-07
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 0.25 m
- True Width
- 0.2125 m
- From
- 136.65 m
- To
- 136.9 m
- Hole Depth
- 250 m
- Intercept Depth
- 136.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-07:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741950
- Northing
- 7166265
- Azimuth
- 335 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.30”
Context: 0.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · nickelGrade: 0.51Grade Unit: %Intercept: 4.15 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 4.15 m
- True Width
- 3.1125 m
- From
- 210.85 m
- To
- 215 m
- Hole Depth
- 348 m
- Intercept Depth
- 210.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:210.85-215
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Estimated true width disclosed
Evidence · table
“0.51”
Context: 4.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.1125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · copperGrade: 0.07Grade Unit: %Intercept: 4.15 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4.15 m
- True Width
- 3.1125 m
- From
- 210.85 m
- To
- 215 m
- Hole Depth
- 348 m
- Intercept Depth
- 210.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:210.85-215
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is very low, not a significant contributor.
Evidence · table
“0.07”
Context: 4.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.1125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · cobaltGrade: 0.01Grade Unit: %Intercept: 4.15 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4.15 m
- True Width
- 3.1125 m
- From
- 210.85 m
- To
- 215 m
- Hole Depth
- 348 m
- Intercept Depth
- 210.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:210.85-215
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 4.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.1125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · platinum group elementsGrade: 0.26Grade Unit: g/tIntercept: 4.15 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 4.15 m
- True Width
- 3.1125 m
- From
- 210.85 m
- To
- 215 m
- Hole Depth
- 348 m
- Intercept Depth
- 210.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:210.85-215
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.26”
Context: 4.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.1125
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · nickelGrade: 0.67Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 13 m
- True Width
- 9.75 m
- From
- 221 m
- To
- 234 m
- Hole Depth
- 348 m
- Intercept Depth
- 221 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:221-234
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept shows a moderate nickel grade over a good length, contributing to the understanding of the Main Zone.
Positive factors
- Moderate nickel grade
- Good intercept length
- Estimated true width disclosed
Evidence · table
“0.67”
Context: 13.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · copperGrade: 0.1Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 13 m
- True Width
- 9.75 m
- From
- 221 m
- To
- 234 m
- Hole Depth
- 348 m
- Intercept Depth
- 221 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:221-234
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is low, likely a minor byproduct.
Evidence · table
“0.10”
Context: 13.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · cobaltGrade: 0.02Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 13 m
- True Width
- 9.75 m
- From
- 221 m
- To
- 234 m
- Hole Depth
- 348 m
- Intercept Depth
- 221 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:221-234
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.02”
Context: 13.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · platinum group elementsGrade: 0.38Grade Unit: g/tIntercept: 13 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 13 m
- True Width
- 9.75 m
- From
- 221 m
- To
- 234 m
- Hole Depth
- 348 m
- Intercept Depth
- 221 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:221-234
- Mining Method
- underground
Location
- Location
- Main
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.38”
Context: 13.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · nickelGrade: 0.22Grade Unit: %Intercept: 6.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 6.9 m
- True Width
- 5.175 m
- From
- 305 m
- To
- 311.9 m
- Hole Depth
- 348 m
- Intercept Depth
- 305 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:305-311.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This intercept in the Footwall Zone is notable for its length, but the nickel grade is relatively low.
Positive factors
- Good intercept length in new Footwall Zone
- Estimated true width disclosed
Negative factors
- Low nickel grade
Evidence · table
“0.22”
Context: 6.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.175
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · copperGrade: 0.03Grade Unit: %Intercept: 6.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 6.9 m
- True Width
- 5.175 m
- From
- 305 m
- To
- 311.9 m
- Hole Depth
- 348 m
- Intercept Depth
- 305 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:305-311.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Copper grade is very low, not a significant contributor.
Evidence · table
“0.03”
Context: 6.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.175
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · cobaltGrade: 0.01Grade Unit: %Intercept: 6.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.9 m
- True Width
- 5.175 m
- From
- 305 m
- To
- 311.9 m
- Hole Depth
- 348 m
- Intercept Depth
- 305 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:305-311.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Cobalt grade is very low, not a significant contributor.
Evidence · table
“0.01”
Context: 6.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.175
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LAP23-08Lappvattnet · platinum group elementsGrade: 0.04Grade Unit: g/tIntercept: 6.9 mView all detailsHide details
Identity
- Hole ID
- LAP23-08
- Project
- Lappvattnet
- Commodity
- platinum group elements
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 6.9 m
- True Width
- 5.175 m
- From
- 305 m
- To
- 311.9 m
- Hole Depth
- 348 m
- Intercept Depth
- 305 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LAP23-08:305-311.9
- Mining Method
- underground
Location
- Location
- Footwall
- Easting
- 1741968
- Northing
- 7166225
- Azimuth
- 335 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: PGEs are present as a byproduct, contributing to the overall value.
Evidence · table
“0.04”
Context: 6.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.175
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 2.47Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 2.47
- Grade Unit
- %
- Intercept
- 6.1 m
- From
- 66 m
- To
- 72.1 m
- Intercept Depth
- 66 m
Classification
- Sample Type
- drill
- Group ID
- incl:66-72.1
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 2.47 % nickel is strong against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 2.47 % nickel is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.47”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 0.25Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 6.1 m
- From
- 66 m
- To
- 72.1 m
- Intercept Depth
- 66 m
Classification
- Sample Type
- drill
- Group ID
- incl:66-72.1
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.04Grade Unit: %Intercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 6.1 m
- From
- 66 m
- To
- 72.1 m
- Intercept Depth
- 66 m
Classification
- Sample Type
- drill
- Group ID
- incl:66-72.1
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.04 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 4.81Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 4.81
- Grade Unit
- %
- Intercept
- 2.75 m
- From
- 69.35 m
- To
- 72.1 m
- Intercept Depth
- 69.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 4.81 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 4.81 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.81”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 0.24Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 2.75 m
- From
- 69.35 m
- To
- 72.1 m
- Intercept Depth
- 69.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.24 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.08Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 2.75 m
- From
- 69.35 m
- To
- 72.1 m
- Intercept Depth
- 69.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:69.35-72.1
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % cobalt is weak against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 7.36Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 7.36
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 69.93 m
- To
- 70.48 m
- Intercept Depth
- 69.93 m
Classification
- Sample Type
- drill
- Group ID
- incl:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 7.36 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 7.36 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.36”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 0.02Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 69.93 m
- To
- 70.48 m
- Intercept Depth
- 69.93 m
Classification
- Sample Type
- drill
- Group ID
- incl:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.12Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 69.93 m
- To
- 70.48 m
- Intercept Depth
- 69.93 m
Classification
- Sample Type
- drill
- Group ID
- incl:69.93-70.48
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % cobalt is weak against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 3.97Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 3.97
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 121.6 m
- To
- 122.5 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 3.97 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 3.97 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.97”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 0.23Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 121.6 m
- To
- 122.5 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.23 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.07Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 121.6 m
- To
- 122.5 m
- Intercept Depth
- 121.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:121.6-122.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.07 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 1.05Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 1.05
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 135.1 m
- To
- 137.4 m
- Intercept Depth
- 135.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 1.05 % nickel is moderate against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.05”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 0.59Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 135.1 m
- To
- 137.4 m
- Intercept Depth
- 135.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.59 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.59”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.02Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 135.1 m
- To
- 137.4 m
- Intercept Depth
- 135.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:135.1-137.4
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.02 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 1.25Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 1.25
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 136.3 m
- To
- 136.65 m
- Intercept Depth
- 136.3 m
Classification
- Sample Type
- drill
- Group ID
- incl:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 1.25 % nickel is moderate against the default band [3, 1.5, 0.8, 0.3] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.25”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 2.19Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 2.19
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 136.3 m
- To
- 136.65 m
- Intercept Depth
- 136.3 m
Classification
- Sample Type
- drill
- Group ID
- incl:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 2.19 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.8 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.19 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.19”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.02Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 136.3 m
- To
- 136.65 m
- Intercept Depth
- 136.3 m
Classification
- Sample Type
- drill
- Group ID
- incl:136.3-136.65
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % cobalt is below against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- 0.02 % cobalt is below the weak threshold (0.08 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · nickelGrade: 4.73Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- nickel
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 4.73
- Grade Unit
- %
- Intercept
- 0.25 m
- From
- 136.65 m
- To
- 136.9 m
- Intercept Depth
- 136.65 m
Classification
- Sample Type
- drill
- Group ID
- incl:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 4.73 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 4.73 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.73”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · copperGrade: 0.06Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- copper
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.25 m
- From
- 136.65 m
- To
- 136.9 m
- Intercept Depth
- 136.65 m
Classification
- Sample Type
- drill
- Group ID
- incl:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclLappvattnet · cobaltGrade: 0.12Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Lappvattnet
- Commodity
- cobalt
- Region
- sweden
- Reported Region
- sweden
- Ticker
- GUG
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.25 m
- From
- 136.65 m
- To
- 136.9 m
- Intercept Depth
- 136.65 m
Classification
- Sample Type
- drill
- Group ID
- incl:136.65-136.9
- Mining Method
- underground
Location
- Location
- Main Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals' Core Services Laboratory and ALS's Lab in Ireland
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % cobalt is weak against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Resource Estimates (1)
inferredRormyrberget · nickelTonnes: 36800000Grade: 0.19Grade Unit: %Contained Metal: 154Contained Unit: million lbsView all detailsHide details
Identity
- Project
- Rormyrberget
- Commodity
- nickel
- Region
- sweden
- Reported Region
- northern Sweden
- Ticker
- GUG
Resource scope
- Estimate type
- resource
- Effective date
- 2020-11-17T00:00:00.000Z
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- John Reddick, Thomas Lindholm
- Resource group id
- resource:c1ffc09ab247097e4326
Resource Data
- Category
- inferred
- Tonnes
- 36800000
- Grade
- 0.19
- Grade Unit
- %
- Contained Metal
- 154
- Contained Unit
- million lbs
Prior Estimate
- Resource Date
- 2020-11-17
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2023-09-28T00:00:00.000Z
Reasoning: This is an existing Inferred resource estimate for Rormyrberget, compliant with NI 43-101 and signed by QPs, but its low grade, age, and Inferred classification limit its confidence and materiality.
Positive factors
- NI 43-101 compliant
- QP signed
Negative factors
- Resource is entirely Inferred
- Low nickel grade
- Estimate is over 2 years old
Evidence · text
“Rormyrberget: Inferred Resource of 36,800,000 tonnes grading 0.19% nickel for 154 million lbs (70 million kg) of nickel.”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 2.9 years before this release
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.