# High-Grade Fluorspar Identified at the Ashram Project's Mallard Prospect Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8 Original source: https://money.tmx.com/en/quote/MRZL/news/4825067802218227/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect Publisher: tmx Original announcement: 2026-05-27T02:25:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Mont Royal Resources Ltd - Ticker: MRZL - Exchange: TSX - Region: Québec, Canada - Primary commodity: Fluorspar - Secondary commodities: Niobium - Document categories: Drill results - Extracted: 2026-09-18 10:51:22 UTC Narrative sentiment: 0.70 · Bullish ## Minestarters Atlas summary Mont Royal Resources has announced high-grade fluorspar results from historical drilling at its Mallard Prospect, part of the Ashram Project in Québec, Canada. Re-interpretation of previous niobium-focused drill holes revealed significant fluorspar intercepts, including up to 39.8% CaF2. The company plans further exploration to expand and delineate these high-grade zones, highlighting the strategic importance of fluorspar in global markets. Reasoning: The document reports high-grade fluorspar intercepts from historical drilling at the Mallard Prospect, re-interpreting previous niobium-focused work. The results confirm significant fluorspar potential in a strategically important critical mineral, supported by robust QA/QC and QP sign-off, despite being historical and lacking true width information. - Positive factor: High-grade fluorspar intercepts confirmed from historical drilling - Positive factor: Strategic importance of fluorspar as a critical mineral - Positive factor: Potential for future co-development with nearby Ashram Deposit - Positive factor: Detailed QA/QC disclosure and QP sign-off - Negative factor: Results are historical, not new drilling - Negative factor: True width of mineralization is not known - Negative factor: No specific cut-off grade used for compositing Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 20 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 20. Some facts used in scoring do not have a stored record. ## Drill Results (20) ### EC10-033 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-0) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-033 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 26.1 - Grade Unit: % - Intercept: 32.4 m - From: 203.9 m - To: 236.3 m - Hole Depth: 353.1 m - Intercept Depth: 203.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-033:203.9-236.3 #### Location - Location: Mallard Prospect - Easting: 538077.14 - Northing: 6310973.22 - CRS: UTM NAD83 Zone 19N - Elevation: 284.68 m - Azimuth: 235 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: High-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: High fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 32.4m @ 26.1% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-033 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-1) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-033 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 32.4 m - From: 203.9 m - To: 236.3 m - Hole Depth: 353.1 m - Intercept Depth: 203.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-033:203.9-236.3 #### Location - Location: Mallard Prospect - Easting: 538077.14 - Northing: 6310973.22 - CRS: UTM NAD83 Zone 19N - Elevation: 284.68 m - Azimuth: 235 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.4% Nb2O5, from 203.9m \(EC10-033\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-033 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-2) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-033 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 38.8 - Grade Unit: % - Intercept: 5 m - From: 203.9 m - To: 208.9 m - Hole Depth: 353.1 m - Intercept Depth: 203.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-033:203.9-208.9 #### Location - Location: Mallard Prospect - Easting: 538077.14 - Northing: 6310973.22 - CRS: UTM NAD83 Zone 19N - Elevation: 284.68 m - Azimuth: 235 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Very high-grade fluorspar sub-intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: Very high fluorspar grade - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 5.0m @ 38.8% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **Bonanza Intercept** — Rejected; excluded from scoring Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Reason: The fluorspar grade of 38.8% CaF2 is exceptionally high. Evidence · text > 38.8% CaF2 **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-033 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-3) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-033 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.3 - Grade Unit: % - Intercept: 5 m - From: 203.9 m - To: 208.9 m - Hole Depth: 353.1 m - Intercept Depth: 203.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-033:203.9-208.9 #### Location - Location: Mallard Prospect - Easting: 538077.14 - Northing: 6310973.22 - CRS: UTM NAD83 Zone 19N - Elevation: 284.68 m - Azimuth: 235 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium sub-intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.3% Nb2O5 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-040 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-4) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-040 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 21.7 - Grade Unit: % - Intercept: 29 m - From: 275 m - To: 304 m - Hole Depth: 344.4 m - Intercept Depth: 275 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-040:275-304 #### Location - Location: Mallard Prospect - Easting: 538113.56 - Northing: 6311004.45 - CRS: UTM NAD83 Zone 19N - Elevation: 285.68 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: High-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: High fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 29.0m @ 21.7% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-040 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-5) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-040 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 29 m - From: 275 m - To: 304 m - Hole Depth: 344.4 m - Intercept Depth: 275 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-040:275-304 #### Location - Location: Mallard Prospect - Easting: 538113.56 - Northing: 6311004.45 - CRS: UTM NAD83 Zone 19N - Elevation: 285.68 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.2% Nb2O5 from 275.0m \(EC10-040\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-040 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-6) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-040 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 39.8 - Grade Unit: % - Intercept: 6.6 m - From: 275 m - To: 281.6 m - Hole Depth: 344.4 m - Intercept Depth: 275 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-040:275-281.6 #### Location - Location: Mallard Prospect - Easting: 538113.56 - Northing: 6311004.45 - CRS: UTM NAD83 Zone 19N - Elevation: 285.68 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Exceptionally high-grade fluorspar sub-intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: Exceptionally high fluorspar grade - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 6.6m @ 39.8% CaF2 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The fluorspar grade of 39.8% CaF2 is exceptionally high. Evidence · text > 39.8% CaF2 **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-040 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-7) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-040 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.3 - Grade Unit: % - Intercept: 6.6 m - From: 275 m - To: 281.6 m - Hole Depth: 344.4 m - Intercept Depth: 275 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-040:275-281.6 #### Location - Location: Mallard Prospect - Easting: 538113.56 - Northing: 6311004.45 - CRS: UTM NAD83 Zone 19N - Elevation: 285.68 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium sub-intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.3% Nb2O5 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC24-209 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-8) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC24-209 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 35.8 - Grade Unit: % - Intercept: 24.8 m - From: 221.7 m - To: 246.5 m - Hole Depth: 316.86 m - Intercept Depth: 221.7 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC24-209:221.7-246.5 #### Location - Location: Mallard Prospect - Easting: 538102.96 - Northing: 6310977.84 - CRS: UTM NAD83 Zone 19N - Elevation: 285.19 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2024-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Very high-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: Very high fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 24.8 m @ 35.8% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **Bonanza Intercept** — Rejected; excluded from scoring Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Reason: The fluorspar grade of 35.8% CaF2 is exceptionally high. Evidence · text > 35.8% CaF2 **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC24-209 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-9) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC24-209 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 24.8 m - From: 221.7 m - To: 246.5 m - Hole Depth: 316.86 m - Intercept Depth: 221.7 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC24-209:221.7-246.5 #### Location - Location: Mallard Prospect - Easting: 538102.96 - Northing: 6310977.84 - CRS: UTM NAD83 Zone 19N - Elevation: 285.19 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2024-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.4% Nb2O5, from 221.7m \(EC24-209\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-041 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-10) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-041 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 21.7 - Grade Unit: % - Intercept: 14.3 m - From: 249 m - To: 263.3 m - Hole Depth: 344.35 m - Intercept Depth: 249 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-041:249-263.3 #### Location - Location: Mallard Prospect - Easting: 538113.87 - Northing: 6311004.7 - CRS: UTM NAD83 Zone 19N - Elevation: 285.76 m - Azimuth: 230 ° - Dip: -75 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: High-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: High fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 14.3m @ 21.7% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC10-041 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-11) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC10-041 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.3 - Grade Unit: % - Intercept: 14.3 m - From: 249 m - To: 263.3 m - Hole Depth: 344.35 m - Intercept Depth: 249 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC10-041:249-263.3 #### Location - Location: Mallard Prospect - Easting: 538113.87 - Northing: 6311004.7 - CRS: UTM NAD83 Zone 19N - Elevation: 285.76 m - Azimuth: 230 ° - Dip: -75 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2010-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.3% Nb2O5 from 249.0m \(EC10-041\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC08-015 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-12) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC08-015 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 33 - Grade Unit: % - Intercept: 13.8 m - From: 187.8 m - To: 201.6 m - Hole Depth: 203.3 m - Intercept Depth: 187.8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC08-015:187.8-201.6 #### Location - Location: Mallard Prospect - Easting: 538013.09 - Northing: 6310965.5 - CRS: UTM NAD83 Zone 19N - Elevation: 284.78 m - Azimuth: 230 ° - Dip: -50 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2008-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Very high-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: Very high fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 13.8 m @ 33.0% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **Bonanza Intercept** — Rejected; excluded from scoring Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Reason: The fluorspar grade of 33.0% CaF2 is exceptionally high. Evidence · text > 33.0% CaF2 **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC08-015 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-13) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC08-015 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.3 - Grade Unit: % - Intercept: 13.8 m - From: 187.8 m - To: 201.6 m - Hole Depth: 203.3 m - Intercept Depth: 187.8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC08-015:187.8-201.6 #### Location - Location: Mallard Prospect - Easting: 538013.09 - Northing: 6310965.5 - CRS: UTM NAD83 Zone 19N - Elevation: 284.78 m - Azimuth: 230 ° - Dip: -50 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2008-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.3% Nb2O5, from 187.8m \(EC08-015\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC08-016 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-14) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC08-016 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 31.6 - Grade Unit: % - Intercept: 20.8 m - From: 202.4 m - To: 223.2 m - Hole Depth: 275.14 m - Intercept Depth: 202.4 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC08-016:202.4-223.2 #### Location - Location: Mallard Prospect - Easting: 538086.29 - Northing: 6311028.99 - CRS: UTM NAD83 Zone 19N - Elevation: 285.36 m - Azimuth: 235 ° - Dip: -50 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2008-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Very high-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: Very high fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 20.8 m @ 31.6% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **Bonanza Intercept** — Rejected; excluded from scoring Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Reason: The fluorspar grade of 31.6% CaF2 is exceptionally high. Evidence · text > 31.6% CaF2 **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC08-016 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-15) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC08-016 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.3 - Grade Unit: % - Intercept: 20.8 m - From: 202.4 m - To: 223.2 m - Hole Depth: 275.14 m - Intercept Depth: 202.4 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC08-016:202.4-223.2 #### Location - Location: Mallard Prospect - Easting: 538086.29 - Northing: 6311028.99 - CRS: UTM NAD83 Zone 19N - Elevation: 285.36 m - Azimuth: 235 ° - Dip: -50 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2008-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.3% Nb2O5, from 202.4m \(EC08-016\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC24-211 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-16) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC24-211 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 25.8 - Grade Unit: % - Intercept: 9 m - From: 201.9 m - To: 210.9 m - Hole Depth: 366 m - Intercept Depth: 201.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC24-211:201.9-210.9 #### Location - Location: Mallard Prospect - Easting: 538066.29 - Northing: 6311011.48 - CRS: UTM NAD83 Zone 19N - Elevation: 285.13 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2024-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: High-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: High fluorspar grade - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 9.0 m @ 25.8% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC24-211 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-17) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC24-211 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 9 m - From: 201.9 m - To: 210.9 m - Hole Depth: 366 m - Intercept Depth: 201.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC24-211:201.9-210.9 #### Location - Location: Mallard Prospect - Easting: 538066.29 - Northing: 6311011.48 - CRS: UTM NAD83 Zone 19N - Elevation: 285.13 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2024-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.4% Nb2O5, from 201.9m \(EC24-211\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC24-211 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-18) Ashram · fluorspar Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC24-211 - Project: Ashram - Commodity: fluorspar - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 38.5 - Grade Unit: % - Intercept: 10.9 m - From: 275.7 m - To: 286.6 m - Hole Depth: 366 m - Intercept Depth: 201.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC24-211:275.7-286.6 #### Location - Location: Mallard Prospect - Easting: 538066.29 - Northing: 6311011.48 - CRS: UTM NAD83 Zone 19N - Elevation: 285.13 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2024-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Very high-grade fluorspar intercept from historical drilling, indicating significant fluorspar potential, but true width is not known and cut-off is undisclosed. - Positive factor: Very high fluorspar grade - Positive factor: Significant intercept length - Positive factor: Polymetallic nature with niobium - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 10.9 m @ 38.5% CaF2 #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **Bonanza Intercept** — Rejected; excluded from scoring Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Reason: The fluorspar grade of 38.5% CaF2 is exceptionally high. Evidence · text > 38.5% CaF2 **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ### EC24-211 [Link to this fact](https://atlas-extractions.minestarters.com/news/high-grade-fluorspar-identified-at-the-ashram-project-s-mallard-prospect--5dac0c0c-1e79-48c2-b83d-71c1b9b106a8#fact-drill-facts-19) Ashram · niobium Historical result Needs review: historical\_restatement #### Identity - Hole ID: EC24-211 - Project: Ashram - Commodity: niobium - Region: canada\_qc - Reported Region: canada\_qc - Ticker: MRZL #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 10.9 m - From: 275.7 m - To: 286.6 m - Hole Depth: 366 m - Intercept Depth: 201.9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: EC24-211:275.7-286.6 #### Location - Location: Mallard Prospect - Easting: 538066.29 - Northing: 6311011.48 - CRS: UTM NAD83 Zone 19N - Elevation: 285.13 m - Azimuth: 230 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: No #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2024-01-01T00:00:00.000Z #### Dates - Event date: 2026-05-27T00:00:00.000Z Reasoning: Niobium intercept from historical drilling, part of a polymetallic system, but true width is not known and cut-off is undisclosed. - Positive factor: Polymetallic nature with fluorspar - Positive factor: QA/QC disclosed and lab certified - Negative factor: Historical data - Negative factor: Apparent width only - Negative factor: Cut-off grade undisclosed Evidence · text > 0.2% Nb2O5, from 275.7m \(EC24-211\) #### Tags used in scoring **Stale Data Re-release** Polarity: negative Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty. Why it applies: The reported results are derived from previously disclosed historical exploration results. Evidence · text > The reported results are derived from previously disclosed historical exploration results. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: True widths are not reported but drilling is believed to provide representative intersections. Evidence · text > True widths are not reported but drilling is believed to provide representative intersections. **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: No specific grade cap or cut-off was used during grade width calculations. Evidence · text > No specific grade cap or cut-off was used during grade width calculations. #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: The document includes a detailed 'Sampling Techniques and Data' section outlining QA/QC procedures, lab accreditation, and QP sign-off. Evidence · text > Sampling procedures follow industry-standard protocols, including QA/QC measures. Core samples collected from drill holes were shipped to Actlabs in Ancaster, ON, for sample preparation. The Actlabs Ancaster facility is an accredited laboratory under ISO/IEC 17025 standards. ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.