IMPACT Silver Intersects 10.38% Zinc over 3.94m Including 20.95% Zinc over 1.70m at the Plomosas Mine
Original announcement by tmx on
- Company
- IMPACT Silver Corp.
- Ticker
- IPT
- Exchange
- TSX
- Region
- northern Mexico
- Primary commodity
- Zinc
- Secondary commodities
- Lead, Silver
- Document categories
- Drill results
- Extracted
- 2026-09-14 07:07:26 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
IMPACT Silver announced further drill results from its underground program at the Juarez Zone of the Plomosas Mine in northern Mexico. The program intersected multiple high-grade zinc intervals, including 10.38% zinc over 3.94 meters and 20.95% zinc over 1.70 meters. These new intersections extend the down-dip projection of the Juarez Zone, which remains open for exploration and is located near existing mining infrastructure.
Reasoning: IMPACT Silver reported strong drill results from the Juarez Zone at its Plomosas Mine, featuring multiple high-grade zinc intercepts, including bonanza grades, with true widths estimated. The mineralization remains open and is strategically located near existing underground infrastructure, indicating potential for resource expansion and rapid development.
Positive factors
- High-grade zinc intercepts, including bonanza grades
- True width estimates provided for all intercepts
- Mineralization remains open for exploration in all directions
- Drill intersections are close to underground mining infrastructure, allowing rapid expansion
- Comprehensive QA/QC procedures disclosed with certified lab and QP sign-off
Facts used in scoring: 90
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Multiple zinc intercepts exceed the 18% exceptional threshold for underground zinc, including 30.10% Zn, 20.95% Zn, 25.40% Zn, 20.50% Zn, 24.90% Zn, 22.90% Zn, and 18.80% Zn.
Evidence · table
“30.10”
Context: 1.00
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The drill results table explicitly provides 'Estimated True Width (metres)' for all reported intercepts.
Evidence · table
“Estimated True Width (metres)”
Context: Interval (metres)
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The document states 'New drill intersections on the down dip projection of the Juarez Zone' and 'Juarez Zone mineralization remains open for exploration in all directions'.
Evidence · text
“New drill intersections on the down dip projection of the Juarez Zone of the Plomosas Mine”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a 'Quality Control/Quality Assurance' section detailing sample collection, insertion of certified assay standards and blanks, and analysis by ALS, an ISO/IEC 17025 accredited laboratory. It also mentions NI 43-101 disclosure and approval by a 'Qualified Person'.
Evidence · text
“Quality Control/Quality Assurance Drill core was NTW size (5.71 cm diameter). Half core samples were collected with a rock saw and tagged for identification. All samples were securely stored at the Plomosas Mine until shipment. A total of 5% certified assay standards and 5% blanks were inserted into every sample shipment as a quality control measure. All samples were shipped to the ALS preparation laboratory in Chihuahua, Mexico, where they were fine crushed (70% passing a 2 mm screen), pulverized (85% passing a 75 micron screen) and pulp split separated for assay. These pulps were shipped to the ALS laboratory in North Vancouver, Canada, where a 10 gram split was aqua regia digested and then analyzed for 36 elements including zinc, lead and silver by ICP-AES spectrometry (ALS code ME-ICP41). Assays for base metals >1% used an overlimit ICP-AES method (ALS code OG46). ALS is an independent, international ISO/IEC 17025 accredited laboratory. Qualified Person and NI 43-101 Disclosure Silvia Kohler, P.Geo., a Senior Geologist employed by IMPACT Silver Corp. and a "Qualified Person" within the meaning of NI-43101, has approved the technical information contained in this news release.”
Extracted facts
Stored fact records: 90. Some facts used in scoring do not have a stored record.
Drill Results (90)
UGMJ-2425Plomosas Mine · zincGrade: 15.75Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2425
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 15.75
- Grade Unit
- %
- Intercept
- 0.3 m
- True Width
- 0.25 m
- From
- 211 m
- To
- 211.3 m
- Intercept Depth
- 211 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2425:211-211.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A high-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- High-grade zinc intercept (15.75% Zn)
- True width disclosed (0.25m)
Negative factors
- Narrow intercept length (0.30m)
Evidence · table
“15.75”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2425Plomosas Mine · leadGrade: 0.18Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2425
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 0.3 m
- True Width
- 0.25 m
- From
- 211 m
- To
- 211.3 m
- Intercept Depth
- 211 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2425:211-211.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead intercept was reported with true width, but its narrowness and low grade limit its individual significance.
Positive factors
- True width disclosed (0.25m)
Negative factors
- Low-grade lead intercept (0.18% Pb)
- Narrow intercept length (0.30m)
Evidence · table
“0.18”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2425Plomosas Mine · silverGrade: 17.4Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2425
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 17.4
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.25 m
- From
- 211 m
- To
- 211.3 m
- Intercept Depth
- 211 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2425:211-211.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept was reported with true width, but its narrowness and low grade limit its individual significance.
Positive factors
- True width disclosed (0.25m)
Negative factors
- Low-grade silver intercept (17.4 g/t Ag)
- Narrow intercept length (0.30m)
Evidence · table
“17.4”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2425Plomosas Mine · zincGrade: 11.6Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2425
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 11.6
- Grade Unit
- %
- Intercept
- 0.4 m
- True Width
- 0.33 m
- From
- 214.6 m
- To
- 215 m
- Intercept Depth
- 211 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2425:214.6-215
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- Strong-grade zinc intercept (11.60% Zn)
- True width disclosed (0.33m)
Negative factors
- Narrow intercept length (0.40m)
Evidence · table
“11.60”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.33
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2425Plomosas Mine · leadGrade: 6.88Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2425
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 6.88
- Grade Unit
- %
- Intercept
- 0.4 m
- True Width
- 0.33 m
- From
- 214.6 m
- To
- 215 m
- Intercept Depth
- 211 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2425:214.6-215
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade lead intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- Strong-grade lead intercept (6.88% Pb)
- True width disclosed (0.33m)
Negative factors
- Narrow intercept length (0.40m)
Evidence · table
“6.88”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.33
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2425Plomosas Mine · silverGrade: 61.8Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2425
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 61.8
- Grade Unit
- g/t
- Intercept
- 0.4 m
- True Width
- 0.33 m
- From
- 214.6 m
- To
- 215 m
- Intercept Depth
- 211 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2425:214.6-215
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade silver intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- Moderate-grade silver intercept (61.8 g/t Ag)
- True width disclosed (0.33m)
Negative factors
- Narrow intercept length (0.40m)
Evidence · table
“61.8”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.33
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2426Plomosas Mine · zincGrade: 6.28Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2426
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 6.28
- Grade Unit
- %
- Intercept
- 0.7 m
- True Width
- 0.61 m
- From
- 121.5 m
- To
- 122.2 m
- Intercept Depth
- 121.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2426:121.5-122.2
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- Moderate-grade zinc intercept (6.28% Zn)
- True width disclosed (0.61m)
Negative factors
- Narrow intercept length (0.70m)
Evidence · table
“6.28”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.61
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2426Plomosas Mine · leadGrade: 1.38Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2426
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.38
- Grade Unit
- %
- Intercept
- 0.7 m
- True Width
- 0.61 m
- From
- 121.5 m
- To
- 122.2 m
- Intercept Depth
- 121.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2426:121.5-122.2
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead intercept was reported with true width, but its narrowness and low grade limit its individual significance.
Positive factors
- True width disclosed (0.61m)
Negative factors
- Weak-grade lead intercept (1.38% Pb)
- Narrow intercept length (0.70m)
Evidence · table
“1.38”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.61
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2426Plomosas Mine · silverGrade: 24.6Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2426
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 24.6
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.61 m
- From
- 121.5 m
- To
- 122.2 m
- Intercept Depth
- 121.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2426:121.5-122.2
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept was reported with true width, but its narrowness and low grade limit its individual significance.
Positive factors
- True width disclosed (0.61m)
Negative factors
- Low-grade silver intercept (24.6 g/t Ag)
- Narrow intercept length (0.70m)
Evidence · table
“24.6”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.61
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · zincGrade: 9.91Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 9.91
- Grade Unit
- %
- Intercept
- 2.75 m
- True Width
- 2.23 m
- From
- 100.2 m
- To
- 102.95 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:100.2-102.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Moderate-grade zinc intercept (9.91% Zn)
- Good intercept length (2.75m)
- True width disclosed (2.23m)
Evidence · table
“9.91”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.23
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · leadGrade: 4.24Grade Unit: %Intercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 4.24
- Grade Unit
- %
- Intercept
- 2.75 m
- True Width
- 2.23 m
- From
- 100.2 m
- To
- 102.95 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:100.2-102.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade lead intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Moderate-grade lead intercept (4.24% Pb)
- Good intercept length (2.75m)
- True width disclosed (2.23m)
Evidence · table
“4.24”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.23
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · silverGrade: 15.2Grade Unit: g/tIntercept: 2.75 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 15.2
- Grade Unit
- g/t
- Intercept
- 2.75 m
- True Width
- 2.23 m
- From
- 100.2 m
- To
- 102.95 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:100.2-102.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (2.75m)
- True width disclosed (2.23m)
Negative factors
- Low-grade silver intercept (15.2 g/t Ag)
Evidence · table
“15.2”
Context: 2.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.23
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · zincGrade: 17.25Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 17.25
- Grade Unit
- %
- Intercept
- 1.25 m
- True Width
- 1.01 m
- From
- 101.7 m
- To
- 102.95 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:101.7-102.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.
Positive factors
- Strong-grade zinc intercept (17.25% Zn)
- Good intercept length (1.25m)
- True width disclosed (1.01m)
Evidence · table
“17.25”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · leadGrade: 7.88Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 7.88
- Grade Unit
- %
- Intercept
- 1.25 m
- True Width
- 1.01 m
- From
- 101.7 m
- To
- 102.95 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:101.7-102.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade lead sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.
Positive factors
- Strong-grade lead intercept (7.88% Pb)
- Good intercept length (1.25m)
- True width disclosed (1.01m)
Evidence · table
“7.88”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · silverGrade: 23.7Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 23.7
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.01 m
- From
- 101.7 m
- To
- 102.95 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:101.7-102.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.25m)
- True width disclosed (1.01m)
Negative factors
- Low-grade silver intercept (23.7 g/t Ag)
Evidence · table
“23.7”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.01
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · zincGrade: 13.02Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 13.02
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.02 m
- From
- 107.35 m
- To
- 109.85 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:107.35-109.85
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Strong-grade zinc intercept (13.02% Zn)
- Good intercept length (2.50m)
- True width disclosed (2.02m)
Evidence · table
“13.02”
Context: 2.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · leadGrade: 0.57Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.02 m
- From
- 107.35 m
- To
- 109.85 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:107.35-109.85
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (2.50m)
- True width disclosed (2.02m)
Negative factors
- Low-grade lead intercept (0.57% Pb)
Evidence · table
“0.57”
Context: 2.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · silverGrade: 7.5Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 7.5
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2.02 m
- From
- 107.35 m
- To
- 109.85 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:107.35-109.85
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (2.50m)
- True width disclosed (2.02m)
Negative factors
- Low-grade silver intercept (7.5 g/t Ag)
Evidence · table
“7.5”
Context: 2.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · zincGrade: 30.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 30.1
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.81 m
- From
- 108.85 m
- To
- 109.85 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:108.85-109.85
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.
Positive factors
- Exceptional-grade zinc intercept (30.10% Zn)
- Good intercept length (1.00m)
- True width disclosed (0.81m)
Evidence · table
“30.10”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · leadGrade: 0.27Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.81 m
- From
- 108.85 m
- To
- 109.85 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:108.85-109.85
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.00m)
- True width disclosed (0.81m)
Negative factors
- Low-grade lead intercept (0.27% Pb)
Evidence · table
“0.27”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2427Plomosas Mine · silverGrade: 14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2427
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 14
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.81 m
- From
- 108.85 m
- To
- 109.85 m
- Intercept Depth
- 100.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2427:108.85-109.85
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.00m)
- True width disclosed (0.81m)
Negative factors
- Low-grade silver intercept (14.0 g/t Ag)
Evidence · table
“14.0”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · zincGrade: 10.38Grade Unit: %Intercept: 4.9 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 10.38
- Grade Unit
- %
- Intercept
- 4.9 m
- True Width
- 3.94 m
- From
- 113.4 m
- To
- 118.3 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-118.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A significant intercept of strong-grade zinc with good true width is a highly positive result, extending mineralization in the Juarez Zone.
Positive factors
- Strong-grade zinc intercept (10.38% Zn)
- Significant intercept length (4.90m)
- True width disclosed (3.94m)
Evidence · table
“10.38”
Context: 4.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.94
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · leadGrade: 0.32Grade Unit: %Intercept: 4.9 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 4.9 m
- True Width
- 3.94 m
- From
- 113.4 m
- To
- 118.3 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-118.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (4.90m)
- True width disclosed (3.94m)
Negative factors
- Low-grade lead intercept (0.32% Pb)
Evidence · table
“0.32”
Context: 4.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.94
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · silverGrade: 7.5Grade Unit: g/tIntercept: 4.9 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 7.5
- Grade Unit
- g/t
- Intercept
- 4.9 m
- True Width
- 3.94 m
- From
- 113.4 m
- To
- 118.3 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-118.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (4.90m)
- True width disclosed (3.94m)
Negative factors
- Low-grade silver intercept (7.5 g/t Ag)
Evidence · table
“7.5”
Context: 4.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.94
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · zincGrade: 20.95Grade Unit: %Intercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 20.95
- Grade Unit
- %
- Intercept
- 2.2 m
- True Width
- 1.7 m
- From
- 113.4 m
- To
- 115.6 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-115.6
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.
Positive factors
- Exceptional-grade zinc intercept (20.95% Zn)
- Good intercept length (2.20m)
- True width disclosed (1.70m)
Evidence · table
“20.95”
Context: 2.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · leadGrade: 0.15Grade Unit: %Intercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 2.2 m
- True Width
- 1.7 m
- From
- 113.4 m
- To
- 115.6 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-115.6
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (2.20m)
- True width disclosed (1.70m)
Negative factors
- Low-grade lead intercept (0.15% Pb)
Evidence · table
“0.15”
Context: 2.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · silverGrade: 10.8Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 10.8
- Grade Unit
- g/t
- Intercept
- 2.2 m
- True Width
- 1.7 m
- From
- 113.4 m
- To
- 115.6 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-115.6
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (2.20m)
- True width disclosed (1.70m)
Negative factors
- Low-grade silver intercept (10.8 g/t Ag)
Evidence · table
“10.8”
Context: 2.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · zincGrade: 25.4Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 25.4
- Grade Unit
- %
- Intercept
- 1.1 m
- True Width
- 0.85 m
- From
- 113.4 m
- To
- 114.5 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-114.5
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.
Positive factors
- Exceptional-grade zinc intercept (25.40% Zn)
- Good intercept length (1.10m)
- True width disclosed (0.85m)
Evidence · table
“25.40”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · leadGrade: 0.12Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1.1 m
- True Width
- 0.85 m
- From
- 113.4 m
- To
- 114.5 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-114.5
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.10m)
- True width disclosed (0.85m)
Negative factors
- Low-grade lead intercept (0.12% Pb)
Evidence · table
“0.12”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2428Plomosas Mine · silverGrade: 9.9Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2428
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 9.9
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 0.85 m
- From
- 113.4 m
- To
- 114.5 m
- Intercept Depth
- 113.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2428:113.4-114.5
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.10m)
- True width disclosed (0.85m)
Negative factors
- Low-grade silver intercept (9.9 g/t Ag)
Evidence · table
“9.9”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2429Plomosas Mine · zincGrade: 0.61Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2429
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.61
- Grade Unit
- %
- Intercept
- 3 m
- True Width
- 2.79 m
- From
- 116.3 m
- To
- 119.3 m
- Intercept Depth
- 116.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2429:116.3-119.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade zinc intercept over a good width has limited individual significance.
Positive factors
- Good intercept length (3.00m)
- True width disclosed (2.79m)
Negative factors
- Low-grade zinc intercept (0.61% Zn)
Evidence · table
“0.61”
Context: 3.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.79
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2429Plomosas Mine · leadGrade: 6.39Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2429
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 6.39
- Grade Unit
- %
- Intercept
- 3 m
- True Width
- 2.79 m
- From
- 116.3 m
- To
- 119.3 m
- Intercept Depth
- 116.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2429:116.3-119.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade lead intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Strong-grade lead intercept (6.39% Pb)
- Good intercept length (3.00m)
- True width disclosed (2.79m)
Evidence · table
“6.39”
Context: 3.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.79
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2429Plomosas Mine · silverGrade: 18.4Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2429
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 18.4
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 2.79 m
- From
- 116.3 m
- To
- 119.3 m
- Intercept Depth
- 116.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2429:116.3-119.3
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept over a good width has limited individual significance.
Positive factors
- Good intercept length (3.00m)
- True width disclosed (2.79m)
Negative factors
- Low-grade silver intercept (18.4 g/t Ag)
Evidence · table
“18.4”
Context: 3.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.79
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2430Plomosas Mine · zincGrade: 4.75Grade Unit: %Intercept: 6.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2430
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 4.75
- Grade Unit
- %
- Intercept
- 6.05 m
- True Width
- 5.78 m
- From
- 95.95 m
- To
- 102 m
- Intercept Depth
- 95.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2430:95.95-102
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A significant intercept of moderate-grade zinc with good true width is a positive result, extending mineralization in the Juarez Zone.
Positive factors
- Moderate-grade zinc intercept (4.75% Zn)
- Significant intercept length (6.05m)
- True width disclosed (5.78m)
Evidence · table
“4.75”
Context: 6.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.78
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2430Plomosas Mine · leadGrade: 1.86Grade Unit: %Intercept: 6.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2430
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.86
- Grade Unit
- %
- Intercept
- 6.05 m
- True Width
- 5.78 m
- From
- 95.95 m
- To
- 102 m
- Intercept Depth
- 95.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2430:95.95-102
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (6.05m)
- True width disclosed (5.78m)
Negative factors
- Weak-grade lead intercept (1.86% Pb)
Evidence · table
“1.86”
Context: 6.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.78
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2430Plomosas Mine · silverGrade: 18.1Grade Unit: g/tIntercept: 6.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2430
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 18.1
- Grade Unit
- g/t
- Intercept
- 6.05 m
- True Width
- 5.78 m
- From
- 95.95 m
- To
- 102 m
- Intercept Depth
- 95.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2430:95.95-102
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (6.05m)
- True width disclosed (5.78m)
Negative factors
- Low-grade silver intercept (18.1 g/t Ag)
Evidence · table
“18.1”
Context: 6.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.78
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2430Plomosas Mine · zincGrade: 20.5Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2430
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 20.5
- Grade Unit
- %
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 101.4 m
- To
- 102 m
- Intercept Depth
- 95.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2430:101.4-102
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with true width disclosure significantly enhances the overall intercept's value, despite its narrowness.
Positive factors
- Exceptional-grade zinc intercept (20.50% Zn)
- True width disclosed (0.57m)
Negative factors
- Narrow intercept length (0.60m)
Evidence · table
“20.50”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2430Plomosas Mine · leadGrade: 6.65Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2430
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 6.65
- Grade Unit
- %
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 101.4 m
- To
- 102 m
- Intercept Depth
- 95.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2430:101.4-102
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade lead sub-interval with true width disclosure contributes positively, despite its narrowness.
Positive factors
- Strong-grade lead intercept (6.65% Pb)
- True width disclosed (0.57m)
Negative factors
- Narrow intercept length (0.60m)
Evidence · table
“6.65”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2430Plomosas Mine · silverGrade: 36.4Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2430
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 36.4
- Grade Unit
- g/t
- Intercept
- 0.6 m
- True Width
- 0.57 m
- From
- 101.4 m
- To
- 102 m
- Intercept Depth
- 95.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2430:101.4-102
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade silver sub-interval with true width disclosure contributes positively, despite its narrowness.
Positive factors
- Moderate-grade silver intercept (36.4 g/t Ag)
- True width disclosed (0.57m)
Negative factors
- Narrow intercept length (0.60m)
Evidence · table
“36.4”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2431Plomosas Mine · zincGrade: 5.96Grade Unit: %Intercept: 6.3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2431
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 5.96
- Grade Unit
- %
- Intercept
- 6.3 m
- True Width
- 6.14 m
- From
- 90.7 m
- To
- 97 m
- Intercept Depth
- 90.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2431:90.7-97
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A significant intercept of moderate-grade zinc with good true width is a positive result, extending mineralization in the Juarez Zone.
Positive factors
- Moderate-grade zinc intercept (5.96% Zn)
- Significant intercept length (6.30m)
- True width disclosed (6.14m)
Evidence · table
“5.96”
Context: 6.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2431Plomosas Mine · leadGrade: 0.46Grade Unit: %Intercept: 6.3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2431
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 6.3 m
- True Width
- 6.14 m
- From
- 90.7 m
- To
- 97 m
- Intercept Depth
- 90.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2431:90.7-97
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (6.30m)
- True width disclosed (6.14m)
Negative factors
- Low-grade lead intercept (0.46% Pb)
Evidence · table
“0.46”
Context: 6.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2431Plomosas Mine · silverGrade: 12.8Grade Unit: g/tIntercept: 6.3 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2431
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 12.8
- Grade Unit
- g/t
- Intercept
- 6.3 m
- True Width
- 6.14 m
- From
- 90.7 m
- To
- 97 m
- Intercept Depth
- 90.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2431:90.7-97
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (6.30m)
- True width disclosed (6.14m)
Negative factors
- Low-grade silver intercept (12.8 g/t Ag)
Evidence · table
“12.8”
Context: 6.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2431Plomosas Mine · zincGrade: 24.9Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2431
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 24.9
- Grade Unit
- %
- Intercept
- 1.1 m
- True Width
- 1.07 m
- From
- 94.9 m
- To
- 96 m
- Intercept Depth
- 90.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2431:94.9-96
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.
Positive factors
- Exceptional-grade zinc intercept (24.90% Zn)
- Good intercept length (1.10m)
- True width disclosed (1.07m)
Evidence · table
“24.90”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.07
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2431Plomosas Mine · leadGrade: 0.1Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2431
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1.1 m
- True Width
- 1.07 m
- From
- 94.9 m
- To
- 96 m
- Intercept Depth
- 90.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2431:94.9-96
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.10m)
- True width disclosed (1.07m)
Negative factors
- Low-grade lead intercept (0.10% Pb)
Evidence · table
“0.10”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.07
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2431Plomosas Mine · silverGrade: 17.7Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2431
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 17.7
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 1.07 m
- From
- 94.9 m
- To
- 96 m
- Intercept Depth
- 90.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2431:94.9-96
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.10m)
- True width disclosed (1.07m)
Negative factors
- Low-grade silver intercept (17.7 g/t Ag)
Evidence · table
“17.7”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.07
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2432Plomosas Mine · zincGrade: 2.15Grade Unit: %Intercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2432
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 2.15
- Grade Unit
- %
- Intercept
- 1.55 m
- True Width
- 1.29 m
- From
- 93.4 m
- To
- 94.95 m
- Intercept Depth
- 93.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2432:93.4-94.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade zinc intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Weak-grade zinc intercept (2.15% Zn)
- Good intercept length (1.55m)
- True width disclosed (1.29m)
Evidence · table
“2.15”
Context: 1.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2432Plomosas Mine · leadGrade: 1.14Grade Unit: %Intercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2432
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.14
- Grade Unit
- %
- Intercept
- 1.55 m
- True Width
- 1.29 m
- From
- 93.4 m
- To
- 94.95 m
- Intercept Depth
- 93.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2432:93.4-94.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Weak-grade lead intercept (1.14% Pb)
- Good intercept length (1.55m)
- True width disclosed (1.29m)
Evidence · table
“1.14”
Context: 1.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2432Plomosas Mine · silverGrade: 14.9Grade Unit: g/tIntercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2432
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 14.9
- Grade Unit
- g/t
- Intercept
- 1.55 m
- True Width
- 1.29 m
- From
- 93.4 m
- To
- 94.95 m
- Intercept Depth
- 93.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2432:93.4-94.95
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.55m)
- True width disclosed (1.29m)
Negative factors
- Low-grade silver intercept (14.9 g/t Ag)
Evidence · table
“14.9”
Context: 1.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.29
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · zincGrade: 4.18Grade Unit: %Intercept: 8.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 4.18
- Grade Unit
- %
- Intercept
- 8.05 m
- True Width
- 7.59 m
- From
- 99.2 m
- To
- 107.25 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:99.2-107.25
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A significant intercept of moderate-grade zinc with good true width is a positive result, extending mineralization in the Juarez Zone.
Positive factors
- Moderate-grade zinc intercept (4.18% Zn)
- Significant intercept length (8.05m)
- True width disclosed (7.59m)
Evidence · table
“4.18”
Context: 8.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.59
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · leadGrade: 2.05Grade Unit: %Intercept: 8.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 2.05
- Grade Unit
- %
- Intercept
- 8.05 m
- True Width
- 7.59 m
- From
- 99.2 m
- To
- 107.25 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:99.2-107.25
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead intercept over a significant width has limited individual significance.
Positive factors
- Weak-grade lead intercept (2.05% Pb)
- Significant intercept length (8.05m)
- True width disclosed (7.59m)
Evidence · table
“2.05”
Context: 8.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.59
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · silverGrade: 14.9Grade Unit: g/tIntercept: 8.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 14.9
- Grade Unit
- g/t
- Intercept
- 8.05 m
- True Width
- 7.59 m
- From
- 99.2 m
- To
- 107.25 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:99.2-107.25
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept over a significant width has limited individual significance.
Positive factors
- Significant intercept length (8.05m)
- True width disclosed (7.59m)
Negative factors
- Low-grade silver intercept (14.9 g/t Ag)
Evidence · table
“14.9”
Context: 8.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.59
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · zincGrade: 10.66Grade Unit: %Intercept: 1.95 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 10.66
- Grade Unit
- %
- Intercept
- 1.95 m
- True Width
- 1.84 m
- From
- 100.7 m
- To
- 102.65 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:100.7-102.65
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.
Positive factors
- Strong-grade zinc intercept (10.66% Zn)
- Good intercept length (1.95m)
- True width disclosed (1.84m)
Evidence · table
“10.66”
Context: 1.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.84
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · leadGrade: 1.47Grade Unit: %Intercept: 1.95 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.47
- Grade Unit
- %
- Intercept
- 1.95 m
- True Width
- 1.84 m
- From
- 100.7 m
- To
- 102.65 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:100.7-102.65
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Weak-grade lead intercept (1.47% Pb)
- Good intercept length (1.95m)
- True width disclosed (1.84m)
Evidence · table
“1.47”
Context: 1.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.84
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · silverGrade: 33.6Grade Unit: g/tIntercept: 1.95 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 33.6
- Grade Unit
- g/t
- Intercept
- 1.95 m
- True Width
- 1.84 m
- From
- 100.7 m
- To
- 102.65 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:100.7-102.65
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade silver sub-interval with good width and true width disclosure contributes positively.
Positive factors
- Moderate-grade silver intercept (33.6 g/t Ag)
- Good intercept length (1.95m)
- True width disclosed (1.84m)
Evidence · table
“33.6”
Context: 1.95
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.84
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · zincGrade: 15.25Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 15.25
- Grade Unit
- %
- Intercept
- 1.05 m
- True Width
- 0.99 m
- From
- 100.7 m
- To
- 101.75 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:100.7-101.75
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.
Positive factors
- Strong-grade zinc intercept (15.25% Zn)
- Good intercept length (1.05m)
- True width disclosed (0.99m)
Evidence · table
“15.25”
Context: 1.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · leadGrade: 1.82Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.82
- Grade Unit
- %
- Intercept
- 1.05 m
- True Width
- 0.99 m
- From
- 100.7 m
- To
- 101.75 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:100.7-101.75
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Weak-grade lead intercept (1.82% Pb)
- Good intercept length (1.05m)
- True width disclosed (0.99m)
Evidence · table
“1.82”
Context: 1.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2433Plomosas Mine · silverGrade: 26.1Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2433
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 26.1
- Grade Unit
- g/t
- Intercept
- 1.05 m
- True Width
- 0.99 m
- From
- 100.7 m
- To
- 101.75 m
- Intercept Depth
- 99.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2433:100.7-101.75
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.05m)
- True width disclosed (0.99m)
Negative factors
- Low-grade silver intercept (26.1 g/t Ag)
Evidence · table
“26.1”
Context: 1.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2538Plomosas Mine · zincGrade: 9.32Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2538
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 9.32
- Grade Unit
- %
- Intercept
- 0.45 m
- True Width
- 0.34 m
- From
- 91.6 m
- To
- 92.05 m
- Intercept Depth
- 91.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2538:91.6-92.05
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- Moderate-grade zinc intercept (9.32% Zn)
- True width disclosed (0.34m)
Negative factors
- Narrow intercept length (0.45m)
Evidence · table
“9.32”
Context: 0.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.34
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2538Plomosas Mine · leadGrade: 12.9Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2538
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 12.9
- Grade Unit
- %
- Intercept
- 0.45 m
- True Width
- 0.34 m
- From
- 91.6 m
- To
- 92.05 m
- Intercept Depth
- 91.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2538:91.6-92.05
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade lead intercept was reported with true width, contributing positively to the Juarez Zone extension, despite its narrowness.
Positive factors
- Exceptional-grade lead intercept (12.90% Pb)
- True width disclosed (0.34m)
Negative factors
- Narrow intercept length (0.45m)
Evidence · table
“12.90”
Context: 0.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.34
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2538Plomosas Mine · silverGrade: 39.5Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2538
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 39.5
- Grade Unit
- g/t
- Intercept
- 0.45 m
- True Width
- 0.34 m
- From
- 91.6 m
- To
- 92.05 m
- Intercept Depth
- 91.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2538:91.6-92.05
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade silver intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.
Positive factors
- Moderate-grade silver intercept (39.5 g/t Ag)
- True width disclosed (0.34m)
Negative factors
- Narrow intercept length (0.45m)
Evidence · table
“39.5”
Context: 0.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.34
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2539Plomosas Mine · zincGrade: 14.77Grade Unit: %Intercept: 1.88 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2539
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 14.77
- Grade Unit
- %
- Intercept
- 1.88 m
- True Width
- 1.62 m
- From
- 69 m
- To
- 70.88 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2539:69-70.88
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Strong-grade zinc intercept (14.77% Zn)
- Good intercept length (1.88m)
- True width disclosed (1.62m)
Evidence · table
“14.77”
Context: 1.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.62
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2539Plomosas Mine · leadGrade: 1.24Grade Unit: %Intercept: 1.88 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2539
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.24
- Grade Unit
- %
- Intercept
- 1.88 m
- True Width
- 1.62 m
- From
- 69 m
- To
- 70.88 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2539:69-70.88
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Weak-grade lead intercept (1.24% Pb)
- Good intercept length (1.88m)
- True width disclosed (1.62m)
Evidence · table
“1.24”
Context: 1.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.62
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2539Plomosas Mine · silverGrade: 11.6Grade Unit: g/tIntercept: 1.88 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2539
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 11.6
- Grade Unit
- g/t
- Intercept
- 1.88 m
- True Width
- 1.62 m
- From
- 69 m
- To
- 70.88 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2539:69-70.88
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.88m)
- True width disclosed (1.62m)
Negative factors
- Low-grade silver intercept (11.6 g/t Ag)
Evidence · table
“11.6”
Context: 1.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.62
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2539Plomosas Mine · zincGrade: 22.9Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2539
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 22.9
- Grade Unit
- %
- Intercept
- 0.88 m
- True Width
- 0.76 m
- From
- 69 m
- To
- 69.88 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2539:69-69.88
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.
Positive factors
- Exceptional-grade zinc intercept (22.90% Zn)
- Good intercept length (0.88m)
- True width disclosed (0.76m)
Evidence · table
“22.90”
Context: 0.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2539Plomosas Mine · leadGrade: 1.14Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2539
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 1.14
- Grade Unit
- %
- Intercept
- 0.88 m
- True Width
- 0.76 m
- From
- 69 m
- To
- 69.88 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2539:69-69.88
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A weak-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Weak-grade lead intercept (1.14% Pb)
- Good intercept length (0.88m)
- True width disclosed (0.76m)
Evidence · table
“1.14”
Context: 0.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2539Plomosas Mine · silverGrade: 13.4Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2539
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 13.4
- Grade Unit
- g/t
- Intercept
- 0.88 m
- True Width
- 0.76 m
- From
- 69 m
- To
- 69.88 m
- Intercept Depth
- 69 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2539:69-69.88
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (0.88m)
- True width disclosed (0.76m)
Negative factors
- Low-grade silver intercept (13.4 g/t Ag)
Evidence · table
“13.4”
Context: 0.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.76
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2540Plomosas Mine · zincGrade: 8.75Grade Unit: %Intercept: 1.17 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2540
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 8.75
- Grade Unit
- %
- Intercept
- 1.17 m
- True Width
- 0.75 m
- From
- 77.05 m
- To
- 78.22 m
- Intercept Depth
- 77.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2540:77.05-78.22
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Moderate-grade zinc intercept (8.75% Zn)
- Good intercept length (1.17m)
- True width disclosed (0.75m)
Evidence · table
“8.75”
Context: 1.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2540Plomosas Mine · leadGrade: 0.2Grade Unit: %Intercept: 1.17 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2540
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 1.17 m
- True Width
- 0.75 m
- From
- 77.05 m
- To
- 78.22 m
- Intercept Depth
- 77.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2540:77.05-78.22
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.17m)
- True width disclosed (0.75m)
Negative factors
- Low-grade lead intercept (0.20% Pb)
Evidence · table
“0.20”
Context: 1.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2540Plomosas Mine · silverGrade: 5.1Grade Unit: g/tIntercept: 1.17 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2540
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 5.1
- Grade Unit
- g/t
- Intercept
- 1.17 m
- True Width
- 0.75 m
- From
- 77.05 m
- To
- 78.22 m
- Intercept Depth
- 77.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2540:77.05-78.22
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.17m)
- True width disclosed (0.75m)
Negative factors
- Low-grade silver intercept (5.1 g/t Ag)
Evidence · table
“5.1”
Context: 1.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2540Plomosas Mine · zincGrade: 13.7Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2540
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 13.7
- Grade Unit
- %
- Intercept
- 0.7 m
- True Width
- 0.45 m
- From
- 77.52 m
- To
- 78.22 m
- Intercept Depth
- 77.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2540:77.52-78.22
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc sub-interval with true width disclosure contributes positively, despite its narrowness.
Positive factors
- Strong-grade zinc intercept (13.70% Zn)
- True width disclosed (0.45m)
Negative factors
- Narrow intercept length (0.70m)
Evidence · table
“13.70”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2540Plomosas Mine · leadGrade: 0.31Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2540
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 0.7 m
- True Width
- 0.45 m
- From
- 77.52 m
- To
- 78.22 m
- Intercept Depth
- 77.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2540:77.52-78.22
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead sub-interval with true width disclosure has limited individual significance due to its narrowness and low grade.
Positive factors
- True width disclosed (0.45m)
Negative factors
- Low-grade lead intercept (0.31% Pb)
- Narrow intercept length (0.70m)
Evidence · table
“0.31”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2540Plomosas Mine · silverGrade: 7.3Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2540
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 7.3
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.45 m
- From
- 77.52 m
- To
- 78.22 m
- Intercept Depth
- 77.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2540:77.52-78.22
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with true width disclosure has limited individual significance due to its narrowness and low grade.
Positive factors
- True width disclosed (0.45m)
Negative factors
- Low-grade silver intercept (7.3 g/t Ag)
- Narrow intercept length (0.70m)
Evidence · table
“7.3”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2541Plomosas Mine · zincGrade: 18.8Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2541
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 18.8
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 0.64 m
- From
- 110.05 m
- To
- 111.55 m
- Intercept Depth
- 110.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2541:110.05-111.55
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc intercept with good width and true width disclosure contributes significantly to the Juarez Zone extension.
Positive factors
- Exceptional-grade zinc intercept (18.80% Zn)
- Good intercept length (1.50m)
- True width disclosed (0.64m)
Evidence · table
“18.80”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2541Plomosas Mine · leadGrade: 9.23Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2541
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 9.23
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 0.64 m
- From
- 110.05 m
- To
- 111.55 m
- Intercept Depth
- 110.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2541:110.05-111.55
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade lead intercept with good width and true width disclosure contributes significantly to the Juarez Zone extension.
Positive factors
- Strong-grade lead intercept (9.23% Pb)
- Good intercept length (1.50m)
- True width disclosed (0.64m)
Evidence · table
“9.23”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2541Plomosas Mine · silverGrade: 42.1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2541
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 42.1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 0.64 m
- From
- 110.05 m
- To
- 111.55 m
- Intercept Depth
- 110.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2541:110.05-111.55
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A moderate-grade silver intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Moderate-grade silver intercept (42.1 g/t Ag)
- Good intercept length (1.50m)
- True width disclosed (0.64m)
Evidence · table
“42.1”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2545Plomosas Mine · zincGrade: 10.69Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2545
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 10.69
- Grade Unit
- %
- Intercept
- 3.5 m
- True Width
- 2.57 m
- From
- 70.65 m
- To
- 74.15 m
- Intercept Depth
- 70.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2545:70.65-74.15
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A strong-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.
Positive factors
- Strong-grade zinc intercept (10.69% Zn)
- Good intercept length (3.50m)
- True width disclosed (2.57m)
Evidence · table
“10.69”
Context: 3.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2545Plomosas Mine · leadGrade: 0.3Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2545
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 3.5 m
- True Width
- 2.57 m
- From
- 70.65 m
- To
- 74.15 m
- Intercept Depth
- 70.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2545:70.65-74.15
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (3.50m)
- True width disclosed (2.57m)
Negative factors
- Low-grade lead intercept (0.30% Pb)
Evidence · table
“0.30”
Context: 3.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2545Plomosas Mine · silverGrade: 10Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2545
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 3.5 m
- True Width
- 2.57 m
- From
- 70.65 m
- To
- 74.15 m
- Intercept Depth
- 70.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2545:70.65-74.15
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (3.50m)
- True width disclosed (2.57m)
Negative factors
- Low-grade silver intercept (10.0 g/t Ag)
Evidence · table
“10.0”
Context: 3.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.57
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2545Plomosas Mine · zincGrade: 30.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2545
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 30.1
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.73 m
- From
- 73.15 m
- To
- 74.15 m
- Intercept Depth
- 70.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2545:73.15-74.15
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.
Positive factors
- Exceptional-grade zinc intercept (30.10% Zn)
- Good intercept length (1.00m)
- True width disclosed (0.73m)
Evidence · table
“30.10”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2545Plomosas Mine · leadGrade: 0.05Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2545
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.73 m
- From
- 73.15 m
- To
- 74.15 m
- Intercept Depth
- 70.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2545:73.15-74.15
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.00m)
- True width disclosed (0.73m)
Negative factors
- Low-grade lead intercept (0.05% Pb)
Evidence · table
“0.05”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
UGMJ-2545Plomosas Mine · silverGrade: 14.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- UGMJ-2545
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 14.4
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.73 m
- From
- 73.15 m
- To
- 74.15 m
- Intercept Depth
- 70.65 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- UGMJ-2545:73.15-74.15
- Mining Method
- underground
Location
- Location
- Juarez Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.
Positive factors
- Good intercept length (1.00m)
- True width disclosed (0.73m)
Negative factors
- Low-grade silver intercept (14.4 g/t Ag)
Evidence · table
“14.4”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.73
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · zincGrade: 11.6Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 11.6
- Grade Unit
- %
- Intercept
- 0.4 m
- True Width
- 0.33 m
- From
- 214.6 m
- To
- 215 m
- Intercept Depth
- 214.6 m
Classification
- Sample Type
- drill
- Group ID
- And:214.6-215
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 11.6 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 4.6 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 11.6 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.60”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.33
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · leadGrade: 6.88Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 6.88
- Grade Unit
- %
- Intercept
- 0.4 m
- True Width
- 0.33 m
- From
- 214.6 m
- To
- 215 m
- Intercept Depth
- 214.6 m
Classification
- Sample Type
- drill
- Group ID
- And:214.6-215
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 6.88 % lead is strong against the default band [10, 6, 3, 1] %. Grade×width 2.8 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 6.88 % lead is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.88”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.33
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · silverGrade: 61.8Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 61.8
- Grade Unit
- g/t
- Intercept
- 0.4 m
- True Width
- 0.33 m
- From
- 214.6 m
- To
- 215 m
- Intercept Depth
- 214.6 m
Classification
- Sample Type
- drill
- Group ID
- And:214.6-215
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 61.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 24.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“61.8”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.33
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · zincGrade: 13.02Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 13.02
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.02 m
- From
- 107.35 m
- To
- 109.85 m
- Intercept Depth
- 107.35 m
Classification
- Sample Type
- drill
- Group ID
- And:107.35-109.85
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 13.02 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 32.5 %·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 13.02 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.02”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · leadGrade: 0.57Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.02 m
- From
- 107.35 m
- To
- 109.85 m
- Intercept Depth
- 107.35 m
Classification
- Sample Type
- drill
- Group ID
- And:107.35-109.85
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.57 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · silverGrade: 7.5Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 7.5
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2.02 m
- From
- 107.35 m
- To
- 109.85 m
- Intercept Depth
- 107.35 m
Classification
- Sample Type
- drill
- Group ID
- And:107.35-109.85
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 7.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 18.8 g/t·m is below.
Negative factors
- 7.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.5”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · zincGrade: 30.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 30.1
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.81 m
- From
- 108.85 m
- To
- 109.85 m
- Intercept Depth
- 108.85 m
Classification
- Sample Type
- drill
- Group ID
- And:108.85-109.85
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 30.1 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 30.1 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 30.1 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“30.10”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · leadGrade: 0.27Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.81 m
- From
- 108.85 m
- To
- 109.85 m
- Intercept Depth
- 108.85 m
Classification
- Sample Type
- drill
- Group ID
- And:108.85-109.85
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.27 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
AndPlomosas Mine · silverGrade: 14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Plomosas Mine
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- IPT
Geometry
- Grade
- 14
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.81 m
- From
- 108.85 m
- To
- 109.85 m
- Intercept Depth
- 108.85 m
Classification
- Sample Type
- drill
- Group ID
- And:108.85-109.85
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-07-07T00:00:00.000Z
Reasoning: Expanded from assay table. 14 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.0 g/t·m is below.
Negative factors
- 14 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.0”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.81
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.