# IMPACT Silver Intersects 10.38% Zinc over 3.94m Including 20.95% Zinc over 1.70m at the Plomosas Mine

Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1

Original source: https://money.tmx.com/en/quote/IPT/news/7616112926901656/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a

Publisher: tmx

Original announcement: 2025-07-07T15:07:00.000Z

Analysis by Minestarters Atlas

Atlas analysis published: Unknown date

Atlas analysis updated: Unknown date

- Company: IMPACT Silver Corp.

- Ticker: IPT

- Exchange: TSX

- Region: northern Mexico

- Primary commodity: Zinc

- Secondary commodities: Lead, Silver

- Document categories: Drill results

- Extracted: 2026-09-14 07:07:26 UTC

Narrative sentiment: 0.80 · Bullish

## Minestarters Atlas summary

IMPACT Silver announced further drill results from its underground program at the Juarez Zone of the Plomosas Mine in northern Mexico. The program intersected multiple high-grade zinc intervals, including 10.38% zinc over 3.94 meters and 20.95% zinc over 1.70 meters. These new intersections extend the down-dip projection of the Juarez Zone, which remains open for exploration and is located near existing mining infrastructure.

Reasoning: IMPACT Silver reported strong drill results from the Juarez Zone at its Plomosas Mine, featuring multiple high-grade zinc intercepts, including bonanza grades, with true widths estimated. The mineralization remains open and is strategically located near existing underground infrastructure, indicating potential for resource expansion and rapid development.

- Positive factor: High-grade zinc intercepts, including bonanza grades

- Positive factor: True width estimates provided for all intercepts

- Positive factor: Mineralization remains open for exploration in all directions

- Positive factor: Drill intersections are close to underground mining infrastructure, allowing rapid expansion

- Positive factor: Comprehensive QA/QC procedures disclosed with certified lab and QP sign-off

Facts used in scoring: 90

## Classification and evidence

**Bonanza Intercept**

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Why it applies: Multiple zinc intercepts exceed the 18% exceptional threshold for underground zinc, including 30.10% Zn, 20.95% Zn, 25.40% Zn, 20.50% Zn, 24.90% Zn, 22.90% Zn, and 18.80% Zn.

Evidence · table

> 30.10

Context: 1.00

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: The drill results table explicitly provides 'Estimated True Width \(metres\)' for all reported intercepts.

Evidence · table

> Estimated True Width \(metres\)

Context: Interval \(metres\)

**Step-Out Extension**

Polarity: positive

Definition: Mineralization extended beyond the previously known limit.

Why it applies: The document states 'New drill intersections on the down dip projection of the Juarez Zone' and 'Juarez Zone mineralization remains open for exploration in all directions'.

Evidence · text

> New drill intersections on the down dip projection of the Juarez Zone of the Plomosas Mine

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: The release includes a 'Quality Control/Quality Assurance' section detailing sample collection, insertion of certified assay standards and blanks, and analysis by ALS, an ISO/IEC 17025 accredited laboratory. It also mentions NI 43-101 disclosure and approval by a 'Qualified Person'.

Evidence · text

> Quality Control/Quality Assurance Drill core was NTW size \(5.71 cm diameter\). Half core samples were collected with a rock saw and tagged for identification. All samples were securely stored at the Plomosas Mine until shipment. A total of 5% certified assay standards and 5% blanks were inserted into every sample shipment as a quality control measure. All samples were shipped to the ALS preparation laboratory in Chihuahua, Mexico, where they were fine crushed \(70% passing a 2 mm screen\), pulverized \(85% passing a 75 micron screen\) and pulp split separated for assay. These pulps were shipped to the ALS laboratory in North Vancouver, Canada, where a 10 gram split was aqua regia digested and then analyzed for 36 elements including zinc, lead and silver by ICP-AES spectrometry \(ALS code ME-ICP41\). Assays for base metals >1% used an overlimit ICP-AES method \(ALS code OG46\). ALS is an independent, international ISO/IEC 17025 accredited laboratory. Qualified Person and NI 43-101 Disclosure Silvia Kohler, P.Geo., a Senior Geologist employed by IMPACT Silver Corp. and a "Qualified Person" within the meaning of NI-43101, has approved the technical information contained in this news release.

## Extracted facts

Stored fact records: 90. Some facts used in scoring do not have a stored record.

## Drill Results (90)

### UGMJ-2425

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-0)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2425
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 15.75
- Grade Unit: %
- Intercept: 0.3 m
- True Width: 0.25 m
- From: 211 m
- To: 211.3 m
- Intercept Depth: 211 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2425:211-211.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A high-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: High-grade zinc intercept \(15.75% Zn\)

- Positive factor: True width disclosed \(0.25m\)

- Negative factor: Narrow intercept length \(0.30m\)

Evidence · table

> 15.75

Context: 0.30

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.25

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2425

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-1)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2425
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.18
- Grade Unit: %
- Intercept: 0.3 m
- True Width: 0.25 m
- From: 211 m
- To: 211.3 m
- Intercept Depth: 211 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2425:211-211.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead intercept was reported with true width, but its narrowness and low grade limit its individual significance.

- Positive factor: True width disclosed \(0.25m\)

- Negative factor: Low-grade lead intercept \(0.18% Pb\)

- Negative factor: Narrow intercept length \(0.30m\)

Evidence · table

> 0.18

Context: 0.30

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.25

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2425

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-2)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2425
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 17.4
- Grade Unit: g/t
- Intercept: 0.3 m
- True Width: 0.25 m
- From: 211 m
- To: 211.3 m
- Intercept Depth: 211 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2425:211-211.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept was reported with true width, but its narrowness and low grade limit its individual significance.

- Positive factor: True width disclosed \(0.25m\)

- Negative factor: Low-grade silver intercept \(17.4 g/t Ag\)

- Negative factor: Narrow intercept length \(0.30m\)

Evidence · table

> 17.4

Context: 0.30

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.25

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2425

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-3)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2425
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 11.6
- Grade Unit: %
- Intercept: 0.4 m
- True Width: 0.33 m
- From: 214.6 m
- To: 215 m
- Intercept Depth: 211 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2425:214.6-215
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: Strong-grade zinc intercept \(11.60% Zn\)

- Positive factor: True width disclosed \(0.33m\)

- Negative factor: Narrow intercept length \(0.40m\)

Evidence · table

> 11.60

Context: 0.40

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.33

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2425

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-4)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2425
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 6.88
- Grade Unit: %
- Intercept: 0.4 m
- True Width: 0.33 m
- From: 214.6 m
- To: 215 m
- Intercept Depth: 211 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2425:214.6-215
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade lead intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: Strong-grade lead intercept \(6.88% Pb\)

- Positive factor: True width disclosed \(0.33m\)

- Negative factor: Narrow intercept length \(0.40m\)

Evidence · table

> 6.88

Context: 0.40

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.33

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2425

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-5)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2425
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 61.8
- Grade Unit: g/t
- Intercept: 0.4 m
- True Width: 0.33 m
- From: 214.6 m
- To: 215 m
- Intercept Depth: 211 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2425:214.6-215
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade silver intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: Moderate-grade silver intercept \(61.8 g/t Ag\)

- Positive factor: True width disclosed \(0.33m\)

- Negative factor: Narrow intercept length \(0.40m\)

Evidence · table

> 61.8

Context: 0.40

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.33

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2426

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-6)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2426
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 6.28
- Grade Unit: %
- Intercept: 0.7 m
- True Width: 0.61 m
- From: 121.5 m
- To: 122.2 m
- Intercept Depth: 121.5 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2426:121.5-122.2
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: Moderate-grade zinc intercept \(6.28% Zn\)

- Positive factor: True width disclosed \(0.61m\)

- Negative factor: Narrow intercept length \(0.70m\)

Evidence · table

> 6.28

Context: 0.70

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.61

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2426

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-7)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2426
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.38
- Grade Unit: %
- Intercept: 0.7 m
- True Width: 0.61 m
- From: 121.5 m
- To: 122.2 m
- Intercept Depth: 121.5 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2426:121.5-122.2
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead intercept was reported with true width, but its narrowness and low grade limit its individual significance.

- Positive factor: True width disclosed \(0.61m\)

- Negative factor: Weak-grade lead intercept \(1.38% Pb\)

- Negative factor: Narrow intercept length \(0.70m\)

Evidence · table

> 1.38

Context: 0.70

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.61

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2426

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-8)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2426
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 24.6
- Grade Unit: g/t
- Intercept: 0.7 m
- True Width: 0.61 m
- From: 121.5 m
- To: 122.2 m
- Intercept Depth: 121.5 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2426:121.5-122.2
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept was reported with true width, but its narrowness and low grade limit its individual significance.

- Positive factor: True width disclosed \(0.61m\)

- Negative factor: Low-grade silver intercept \(24.6 g/t Ag\)

- Negative factor: Narrow intercept length \(0.70m\)

Evidence · table

> 24.6

Context: 0.70

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.61

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-9)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 9.91
- Grade Unit: %
- Intercept: 2.75 m
- True Width: 2.23 m
- From: 100.2 m
- To: 102.95 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:100.2-102.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Moderate-grade zinc intercept \(9.91% Zn\)

- Positive factor: Good intercept length \(2.75m\)

- Positive factor: True width disclosed \(2.23m\)

Evidence · table

> 9.91

Context: 2.75

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.23

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-10)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 4.24
- Grade Unit: %
- Intercept: 2.75 m
- True Width: 2.23 m
- From: 100.2 m
- To: 102.95 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:100.2-102.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade lead intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Moderate-grade lead intercept \(4.24% Pb\)

- Positive factor: Good intercept length \(2.75m\)

- Positive factor: True width disclosed \(2.23m\)

Evidence · table

> 4.24

Context: 2.75

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.23

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-11)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 15.2
- Grade Unit: g/t
- Intercept: 2.75 m
- True Width: 2.23 m
- From: 100.2 m
- To: 102.95 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:100.2-102.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(2.75m\)

- Positive factor: True width disclosed \(2.23m\)

- Negative factor: Low-grade silver intercept \(15.2 g/t Ag\)

Evidence · table

> 15.2

Context: 2.75

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.23

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-12)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 17.25
- Grade Unit: %
- Intercept: 1.25 m
- True Width: 1.01 m
- From: 101.7 m
- To: 102.95 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:101.7-102.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.

- Positive factor: Strong-grade zinc intercept \(17.25% Zn\)

- Positive factor: Good intercept length \(1.25m\)

- Positive factor: True width disclosed \(1.01m\)

Evidence · table

> 17.25

Context: 1.25

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.01

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-13)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 7.88
- Grade Unit: %
- Intercept: 1.25 m
- True Width: 1.01 m
- From: 101.7 m
- To: 102.95 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:101.7-102.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade lead sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.

- Positive factor: Strong-grade lead intercept \(7.88% Pb\)

- Positive factor: Good intercept length \(1.25m\)

- Positive factor: True width disclosed \(1.01m\)

Evidence · table

> 7.88

Context: 1.25

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.01

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-14)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 23.7
- Grade Unit: g/t
- Intercept: 1.25 m
- True Width: 1.01 m
- From: 101.7 m
- To: 102.95 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:101.7-102.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.25m\)

- Positive factor: True width disclosed \(1.01m\)

- Negative factor: Low-grade silver intercept \(23.7 g/t Ag\)

Evidence · table

> 23.7

Context: 1.25

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.01

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-15)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 13.02
- Grade Unit: %
- Intercept: 2.5 m
- True Width: 2.02 m
- From: 107.35 m
- To: 109.85 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:107.35-109.85
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Strong-grade zinc intercept \(13.02% Zn\)

- Positive factor: Good intercept length \(2.50m\)

- Positive factor: True width disclosed \(2.02m\)

Evidence · table

> 13.02

Context: 2.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.02

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-16)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.57
- Grade Unit: %
- Intercept: 2.5 m
- True Width: 2.02 m
- From: 107.35 m
- To: 109.85 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:107.35-109.85
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(2.50m\)

- Positive factor: True width disclosed \(2.02m\)

- Negative factor: Low-grade lead intercept \(0.57% Pb\)

Evidence · table

> 0.57

Context: 2.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.02

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-17)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 7.5
- Grade Unit: g/t
- Intercept: 2.5 m
- True Width: 2.02 m
- From: 107.35 m
- To: 109.85 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:107.35-109.85
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(2.50m\)

- Positive factor: True width disclosed \(2.02m\)

- Negative factor: Low-grade silver intercept \(7.5 g/t Ag\)

Evidence · table

> 7.5

Context: 2.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.02

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-18)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 30.1
- Grade Unit: %
- Intercept: 1 m
- True Width: 0.81 m
- From: 108.85 m
- To: 109.85 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:108.85-109.85
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.

- Positive factor: Exceptional-grade zinc intercept \(30.10% Zn\)

- Positive factor: Good intercept length \(1.00m\)

- Positive factor: True width disclosed \(0.81m\)

Evidence · table

> 30.10

Context: 1.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.81

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-19)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.27
- Grade Unit: %
- Intercept: 1 m
- True Width: 0.81 m
- From: 108.85 m
- To: 109.85 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:108.85-109.85
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.00m\)

- Positive factor: True width disclosed \(0.81m\)

- Negative factor: Low-grade lead intercept \(0.27% Pb\)

Evidence · table

> 0.27

Context: 1.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.81

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2427

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-20)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2427
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 14
- Grade Unit: g/t
- Intercept: 1 m
- True Width: 0.81 m
- From: 108.85 m
- To: 109.85 m
- Intercept Depth: 100.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2427:108.85-109.85
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.00m\)

- Positive factor: True width disclosed \(0.81m\)

- Negative factor: Low-grade silver intercept \(14.0 g/t Ag\)

Evidence · table

> 14.0

Context: 1.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.81

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-21)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 10.38
- Grade Unit: %
- Intercept: 4.9 m
- True Width: 3.94 m
- From: 113.4 m
- To: 118.3 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-118.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A significant intercept of strong-grade zinc with good true width is a highly positive result, extending mineralization in the Juarez Zone.

- Positive factor: Strong-grade zinc intercept \(10.38% Zn\)

- Positive factor: Significant intercept length \(4.90m\)

- Positive factor: True width disclosed \(3.94m\)

Evidence · table

> 10.38

Context: 4.90

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 3.94

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-22)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.32
- Grade Unit: %
- Intercept: 4.9 m
- True Width: 3.94 m
- From: 113.4 m
- To: 118.3 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-118.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(4.90m\)

- Positive factor: True width disclosed \(3.94m\)

- Negative factor: Low-grade lead intercept \(0.32% Pb\)

Evidence · table

> 0.32

Context: 4.90

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 3.94

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-23)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 7.5
- Grade Unit: g/t
- Intercept: 4.9 m
- True Width: 3.94 m
- From: 113.4 m
- To: 118.3 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-118.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(4.90m\)

- Positive factor: True width disclosed \(3.94m\)

- Negative factor: Low-grade silver intercept \(7.5 g/t Ag\)

Evidence · table

> 7.5

Context: 4.90

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 3.94

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-24)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 20.95
- Grade Unit: %
- Intercept: 2.2 m
- True Width: 1.7 m
- From: 113.4 m
- To: 115.6 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-115.6
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.

- Positive factor: Exceptional-grade zinc intercept \(20.95% Zn\)

- Positive factor: Good intercept length \(2.20m\)

- Positive factor: True width disclosed \(1.70m\)

Evidence · table

> 20.95

Context: 2.20

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.7

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-25)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.15
- Grade Unit: %
- Intercept: 2.2 m
- True Width: 1.7 m
- From: 113.4 m
- To: 115.6 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-115.6
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(2.20m\)

- Positive factor: True width disclosed \(1.70m\)

- Negative factor: Low-grade lead intercept \(0.15% Pb\)

Evidence · table

> 0.15

Context: 2.20

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.7

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-26)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 10.8
- Grade Unit: g/t
- Intercept: 2.2 m
- True Width: 1.7 m
- From: 113.4 m
- To: 115.6 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-115.6
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(2.20m\)

- Positive factor: True width disclosed \(1.70m\)

- Negative factor: Low-grade silver intercept \(10.8 g/t Ag\)

Evidence · table

> 10.8

Context: 2.20

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.7

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-27)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 25.4
- Grade Unit: %
- Intercept: 1.1 m
- True Width: 0.85 m
- From: 113.4 m
- To: 114.5 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-114.5
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.

- Positive factor: Exceptional-grade zinc intercept \(25.40% Zn\)

- Positive factor: Good intercept length \(1.10m\)

- Positive factor: True width disclosed \(0.85m\)

Evidence · table

> 25.40

Context: 1.10

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.85

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-28)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.12
- Grade Unit: %
- Intercept: 1.1 m
- True Width: 0.85 m
- From: 113.4 m
- To: 114.5 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-114.5
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.10m\)

- Positive factor: True width disclosed \(0.85m\)

- Negative factor: Low-grade lead intercept \(0.12% Pb\)

Evidence · table

> 0.12

Context: 1.10

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.85

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2428

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-29)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2428
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 9.9
- Grade Unit: g/t
- Intercept: 1.1 m
- True Width: 0.85 m
- From: 113.4 m
- To: 114.5 m
- Intercept Depth: 113.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2428:113.4-114.5
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.10m\)

- Positive factor: True width disclosed \(0.85m\)

- Negative factor: Low-grade silver intercept \(9.9 g/t Ag\)

Evidence · table

> 9.9

Context: 1.10

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.85

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2429

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-30)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2429
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.61
- Grade Unit: %
- Intercept: 3 m
- True Width: 2.79 m
- From: 116.3 m
- To: 119.3 m
- Intercept Depth: 116.3 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2429:116.3-119.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade zinc intercept over a good width has limited individual significance.

- Positive factor: Good intercept length \(3.00m\)

- Positive factor: True width disclosed \(2.79m\)

- Negative factor: Low-grade zinc intercept \(0.61% Zn\)

Evidence · table

> 0.61

Context: 3.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.79

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2429

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-31)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2429
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 6.39
- Grade Unit: %
- Intercept: 3 m
- True Width: 2.79 m
- From: 116.3 m
- To: 119.3 m
- Intercept Depth: 116.3 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2429:116.3-119.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade lead intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Strong-grade lead intercept \(6.39% Pb\)

- Positive factor: Good intercept length \(3.00m\)

- Positive factor: True width disclosed \(2.79m\)

Evidence · table

> 6.39

Context: 3.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.79

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2429

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-32)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2429
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 18.4
- Grade Unit: g/t
- Intercept: 3 m
- True Width: 2.79 m
- From: 116.3 m
- To: 119.3 m
- Intercept Depth: 116.3 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2429:116.3-119.3
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept over a good width has limited individual significance.

- Positive factor: Good intercept length \(3.00m\)

- Positive factor: True width disclosed \(2.79m\)

- Negative factor: Low-grade silver intercept \(18.4 g/t Ag\)

Evidence · table

> 18.4

Context: 3.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.79

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2430

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-33)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2430
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 4.75
- Grade Unit: %
- Intercept: 6.05 m
- True Width: 5.78 m
- From: 95.95 m
- To: 102 m
- Intercept Depth: 95.95 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2430:95.95-102
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A significant intercept of moderate-grade zinc with good true width is a positive result, extending mineralization in the Juarez Zone.

- Positive factor: Moderate-grade zinc intercept \(4.75% Zn\)

- Positive factor: Significant intercept length \(6.05m\)

- Positive factor: True width disclosed \(5.78m\)

Evidence · table

> 4.75

Context: 6.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 5.78

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2430

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-34)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2430
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.86
- Grade Unit: %
- Intercept: 6.05 m
- True Width: 5.78 m
- From: 95.95 m
- To: 102 m
- Intercept Depth: 95.95 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2430:95.95-102
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(6.05m\)

- Positive factor: True width disclosed \(5.78m\)

- Negative factor: Weak-grade lead intercept \(1.86% Pb\)

Evidence · table

> 1.86

Context: 6.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 5.78

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2430

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-35)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2430
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 18.1
- Grade Unit: g/t
- Intercept: 6.05 m
- True Width: 5.78 m
- From: 95.95 m
- To: 102 m
- Intercept Depth: 95.95 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2430:95.95-102
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(6.05m\)

- Positive factor: True width disclosed \(5.78m\)

- Negative factor: Low-grade silver intercept \(18.1 g/t Ag\)

Evidence · table

> 18.1

Context: 6.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 5.78

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2430

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-36)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2430
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 20.5
- Grade Unit: %
- Intercept: 0.6 m
- True Width: 0.57 m
- From: 101.4 m
- To: 102 m
- Intercept Depth: 95.95 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2430:101.4-102
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with true width disclosure significantly enhances the overall intercept's value, despite its narrowness.

- Positive factor: Exceptional-grade zinc intercept \(20.50% Zn\)

- Positive factor: True width disclosed \(0.57m\)

- Negative factor: Narrow intercept length \(0.60m\)

Evidence · table

> 20.50

Context: 0.60

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.57

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2430

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-37)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2430
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 6.65
- Grade Unit: %
- Intercept: 0.6 m
- True Width: 0.57 m
- From: 101.4 m
- To: 102 m
- Intercept Depth: 95.95 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2430:101.4-102
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade lead sub-interval with true width disclosure contributes positively, despite its narrowness.

- Positive factor: Strong-grade lead intercept \(6.65% Pb\)

- Positive factor: True width disclosed \(0.57m\)

- Negative factor: Narrow intercept length \(0.60m\)

Evidence · table

> 6.65

Context: 0.60

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.57

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2430

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-38)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2430
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 36.4
- Grade Unit: g/t
- Intercept: 0.6 m
- True Width: 0.57 m
- From: 101.4 m
- To: 102 m
- Intercept Depth: 95.95 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2430:101.4-102
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade silver sub-interval with true width disclosure contributes positively, despite its narrowness.

- Positive factor: Moderate-grade silver intercept \(36.4 g/t Ag\)

- Positive factor: True width disclosed \(0.57m\)

- Negative factor: Narrow intercept length \(0.60m\)

Evidence · table

> 36.4

Context: 0.60

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.57

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2431

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-39)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2431
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 5.96
- Grade Unit: %
- Intercept: 6.3 m
- True Width: 6.14 m
- From: 90.7 m
- To: 97 m
- Intercept Depth: 90.7 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2431:90.7-97
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A significant intercept of moderate-grade zinc with good true width is a positive result, extending mineralization in the Juarez Zone.

- Positive factor: Moderate-grade zinc intercept \(5.96% Zn\)

- Positive factor: Significant intercept length \(6.30m\)

- Positive factor: True width disclosed \(6.14m\)

Evidence · table

> 5.96

Context: 6.30

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 6.14

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2431

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-40)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2431
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.46
- Grade Unit: %
- Intercept: 6.3 m
- True Width: 6.14 m
- From: 90.7 m
- To: 97 m
- Intercept Depth: 90.7 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2431:90.7-97
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(6.30m\)

- Positive factor: True width disclosed \(6.14m\)

- Negative factor: Low-grade lead intercept \(0.46% Pb\)

Evidence · table

> 0.46

Context: 6.30

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 6.14

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2431

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-41)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2431
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 12.8
- Grade Unit: g/t
- Intercept: 6.3 m
- True Width: 6.14 m
- From: 90.7 m
- To: 97 m
- Intercept Depth: 90.7 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2431:90.7-97
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(6.30m\)

- Positive factor: True width disclosed \(6.14m\)

- Negative factor: Low-grade silver intercept \(12.8 g/t Ag\)

Evidence · table

> 12.8

Context: 6.30

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 6.14

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2431

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-42)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2431
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 24.9
- Grade Unit: %
- Intercept: 1.1 m
- True Width: 1.07 m
- From: 94.9 m
- To: 96 m
- Intercept Depth: 90.7 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2431:94.9-96
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.

- Positive factor: Exceptional-grade zinc intercept \(24.90% Zn\)

- Positive factor: Good intercept length \(1.10m\)

- Positive factor: True width disclosed \(1.07m\)

Evidence · table

> 24.90

Context: 1.10

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.07

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2431

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-43)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2431
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.1
- Grade Unit: %
- Intercept: 1.1 m
- True Width: 1.07 m
- From: 94.9 m
- To: 96 m
- Intercept Depth: 90.7 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2431:94.9-96
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.10m\)

- Positive factor: True width disclosed \(1.07m\)

- Negative factor: Low-grade lead intercept \(0.10% Pb\)

Evidence · table

> 0.10

Context: 1.10

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.07

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2431

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-44)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2431
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 17.7
- Grade Unit: g/t
- Intercept: 1.1 m
- True Width: 1.07 m
- From: 94.9 m
- To: 96 m
- Intercept Depth: 90.7 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2431:94.9-96
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.10m\)

- Positive factor: True width disclosed \(1.07m\)

- Negative factor: Low-grade silver intercept \(17.7 g/t Ag\)

Evidence · table

> 17.7

Context: 1.10

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.07

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2432

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-45)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2432
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 2.15
- Grade Unit: %
- Intercept: 1.55 m
- True Width: 1.29 m
- From: 93.4 m
- To: 94.95 m
- Intercept Depth: 93.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2432:93.4-94.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade zinc intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Weak-grade zinc intercept \(2.15% Zn\)

- Positive factor: Good intercept length \(1.55m\)

- Positive factor: True width disclosed \(1.29m\)

Evidence · table

> 2.15

Context: 1.55

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.29

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2432

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-46)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2432
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.14
- Grade Unit: %
- Intercept: 1.55 m
- True Width: 1.29 m
- From: 93.4 m
- To: 94.95 m
- Intercept Depth: 93.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2432:93.4-94.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Weak-grade lead intercept \(1.14% Pb\)

- Positive factor: Good intercept length \(1.55m\)

- Positive factor: True width disclosed \(1.29m\)

Evidence · table

> 1.14

Context: 1.55

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.29

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2432

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-47)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2432
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 14.9
- Grade Unit: g/t
- Intercept: 1.55 m
- True Width: 1.29 m
- From: 93.4 m
- To: 94.95 m
- Intercept Depth: 93.4 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2432:93.4-94.95
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.55m\)

- Positive factor: True width disclosed \(1.29m\)

- Negative factor: Low-grade silver intercept \(14.9 g/t Ag\)

Evidence · table

> 14.9

Context: 1.55

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.29

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-48)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 4.18
- Grade Unit: %
- Intercept: 8.05 m
- True Width: 7.59 m
- From: 99.2 m
- To: 107.25 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:99.2-107.25
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A significant intercept of moderate-grade zinc with good true width is a positive result, extending mineralization in the Juarez Zone.

- Positive factor: Moderate-grade zinc intercept \(4.18% Zn\)

- Positive factor: Significant intercept length \(8.05m\)

- Positive factor: True width disclosed \(7.59m\)

Evidence · table

> 4.18

Context: 8.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 7.59

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-49)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 2.05
- Grade Unit: %
- Intercept: 8.05 m
- True Width: 7.59 m
- From: 99.2 m
- To: 107.25 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:99.2-107.25
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead intercept over a significant width has limited individual significance.

- Positive factor: Weak-grade lead intercept \(2.05% Pb\)

- Positive factor: Significant intercept length \(8.05m\)

- Positive factor: True width disclosed \(7.59m\)

Evidence · table

> 2.05

Context: 8.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 7.59

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-50)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 14.9
- Grade Unit: g/t
- Intercept: 8.05 m
- True Width: 7.59 m
- From: 99.2 m
- To: 107.25 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:99.2-107.25
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept over a significant width has limited individual significance.

- Positive factor: Significant intercept length \(8.05m\)

- Positive factor: True width disclosed \(7.59m\)

- Negative factor: Low-grade silver intercept \(14.9 g/t Ag\)

Evidence · table

> 14.9

Context: 8.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 7.59

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-51)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 10.66
- Grade Unit: %
- Intercept: 1.95 m
- True Width: 1.84 m
- From: 100.7 m
- To: 102.65 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:100.7-102.65
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.

- Positive factor: Strong-grade zinc intercept \(10.66% Zn\)

- Positive factor: Good intercept length \(1.95m\)

- Positive factor: True width disclosed \(1.84m\)

Evidence · table

> 10.66

Context: 1.95

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.84

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-52)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.47
- Grade Unit: %
- Intercept: 1.95 m
- True Width: 1.84 m
- From: 100.7 m
- To: 102.65 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:100.7-102.65
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Weak-grade lead intercept \(1.47% Pb\)

- Positive factor: Good intercept length \(1.95m\)

- Positive factor: True width disclosed \(1.84m\)

Evidence · table

> 1.47

Context: 1.95

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.84

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-53)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 33.6
- Grade Unit: g/t
- Intercept: 1.95 m
- True Width: 1.84 m
- From: 100.7 m
- To: 102.65 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:100.7-102.65
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade silver sub-interval with good width and true width disclosure contributes positively.

- Positive factor: Moderate-grade silver intercept \(33.6 g/t Ag\)

- Positive factor: Good intercept length \(1.95m\)

- Positive factor: True width disclosed \(1.84m\)

Evidence · table

> 33.6

Context: 1.95

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.84

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-54)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 15.25
- Grade Unit: %
- Intercept: 1.05 m
- True Width: 0.99 m
- From: 100.7 m
- To: 101.75 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:100.7-101.75
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value.

- Positive factor: Strong-grade zinc intercept \(15.25% Zn\)

- Positive factor: Good intercept length \(1.05m\)

- Positive factor: True width disclosed \(0.99m\)

Evidence · table

> 15.25

Context: 1.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.99

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-55)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.82
- Grade Unit: %
- Intercept: 1.05 m
- True Width: 0.99 m
- From: 100.7 m
- To: 101.75 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:100.7-101.75
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Weak-grade lead intercept \(1.82% Pb\)

- Positive factor: Good intercept length \(1.05m\)

- Positive factor: True width disclosed \(0.99m\)

Evidence · table

> 1.82

Context: 1.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.99

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2433

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-56)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2433
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 26.1
- Grade Unit: g/t
- Intercept: 1.05 m
- True Width: 0.99 m
- From: 100.7 m
- To: 101.75 m
- Intercept Depth: 99.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2433:100.7-101.75
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.05m\)

- Positive factor: True width disclosed \(0.99m\)

- Negative factor: Low-grade silver intercept \(26.1 g/t Ag\)

Evidence · table

> 26.1

Context: 1.05

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.99

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2538

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-57)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2538
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 9.32
- Grade Unit: %
- Intercept: 0.45 m
- True Width: 0.34 m
- From: 91.6 m
- To: 92.05 m
- Intercept Depth: 91.6 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2538:91.6-92.05
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade zinc intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: Moderate-grade zinc intercept \(9.32% Zn\)

- Positive factor: True width disclosed \(0.34m\)

- Negative factor: Narrow intercept length \(0.45m\)

Evidence · table

> 9.32

Context: 0.45

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.34

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2538

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-58)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2538
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 12.9
- Grade Unit: %
- Intercept: 0.45 m
- True Width: 0.34 m
- From: 91.6 m
- To: 92.05 m
- Intercept Depth: 91.6 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2538:91.6-92.05
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade lead intercept was reported with true width, contributing positively to the Juarez Zone extension, despite its narrowness.

- Positive factor: Exceptional-grade lead intercept \(12.90% Pb\)

- Positive factor: True width disclosed \(0.34m\)

- Negative factor: Narrow intercept length \(0.45m\)

Evidence · table

> 12.90

Context: 0.45

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.34

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2538

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-59)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2538
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 39.5
- Grade Unit: g/t
- Intercept: 0.45 m
- True Width: 0.34 m
- From: 91.6 m
- To: 92.05 m
- Intercept Depth: 91.6 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2538:91.6-92.05
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade silver intercept was reported with true width, contributing to the extension of the Juarez Zone, though the interval is narrow.

- Positive factor: Moderate-grade silver intercept \(39.5 g/t Ag\)

- Positive factor: True width disclosed \(0.34m\)

- Negative factor: Narrow intercept length \(0.45m\)

Evidence · table

> 39.5

Context: 0.45

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.34

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2539

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-60)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2539
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 14.77
- Grade Unit: %
- Intercept: 1.88 m
- True Width: 1.62 m
- From: 69 m
- To: 70.88 m
- Intercept Depth: 69 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2539:69-70.88
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Strong-grade zinc intercept \(14.77% Zn\)

- Positive factor: Good intercept length \(1.88m\)

- Positive factor: True width disclosed \(1.62m\)

Evidence · table

> 14.77

Context: 1.88

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.62

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2539

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-61)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2539
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.24
- Grade Unit: %
- Intercept: 1.88 m
- True Width: 1.62 m
- From: 69 m
- To: 70.88 m
- Intercept Depth: 69 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2539:69-70.88
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Weak-grade lead intercept \(1.24% Pb\)

- Positive factor: Good intercept length \(1.88m\)

- Positive factor: True width disclosed \(1.62m\)

Evidence · table

> 1.24

Context: 1.88

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.62

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2539

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-62)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2539
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 11.6
- Grade Unit: g/t
- Intercept: 1.88 m
- True Width: 1.62 m
- From: 69 m
- To: 70.88 m
- Intercept Depth: 69 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2539:69-70.88
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.88m\)

- Positive factor: True width disclosed \(1.62m\)

- Negative factor: Low-grade silver intercept \(11.6 g/t Ag\)

Evidence · table

> 11.6

Context: 1.88

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 1.62

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2539

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-63)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2539
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 22.9
- Grade Unit: %
- Intercept: 0.88 m
- True Width: 0.76 m
- From: 69 m
- To: 69.88 m
- Intercept Depth: 69 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2539:69-69.88
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.

- Positive factor: Exceptional-grade zinc intercept \(22.90% Zn\)

- Positive factor: Good intercept length \(0.88m\)

- Positive factor: True width disclosed \(0.76m\)

Evidence · table

> 22.90

Context: 0.88

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.76

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2539

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-64)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2539
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 1.14
- Grade Unit: %
- Intercept: 0.88 m
- True Width: 0.76 m
- From: 69 m
- To: 69.88 m
- Intercept Depth: 69 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2539:69-69.88
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A weak-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Weak-grade lead intercept \(1.14% Pb\)

- Positive factor: Good intercept length \(0.88m\)

- Positive factor: True width disclosed \(0.76m\)

Evidence · table

> 1.14

Context: 0.88

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.76

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2539

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-65)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2539
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 13.4
- Grade Unit: g/t
- Intercept: 0.88 m
- True Width: 0.76 m
- From: 69 m
- To: 69.88 m
- Intercept Depth: 69 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2539:69-69.88
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(0.88m\)

- Positive factor: True width disclosed \(0.76m\)

- Negative factor: Low-grade silver intercept \(13.4 g/t Ag\)

Evidence · table

> 13.4

Context: 0.88

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.76

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2540

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-66)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2540
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 8.75
- Grade Unit: %
- Intercept: 1.17 m
- True Width: 0.75 m
- From: 77.05 m
- To: 78.22 m
- Intercept Depth: 77.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2540:77.05-78.22
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Moderate-grade zinc intercept \(8.75% Zn\)

- Positive factor: Good intercept length \(1.17m\)

- Positive factor: True width disclosed \(0.75m\)

Evidence · table

> 8.75

Context: 1.17

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.75

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2540

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-67)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2540
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.2
- Grade Unit: %
- Intercept: 1.17 m
- True Width: 0.75 m
- From: 77.05 m
- To: 78.22 m
- Intercept Depth: 77.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2540:77.05-78.22
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.17m\)

- Positive factor: True width disclosed \(0.75m\)

- Negative factor: Low-grade lead intercept \(0.20% Pb\)

Evidence · table

> 0.20

Context: 1.17

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.75

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2540

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-68)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2540
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 5.1
- Grade Unit: g/t
- Intercept: 1.17 m
- True Width: 0.75 m
- From: 77.05 m
- To: 78.22 m
- Intercept Depth: 77.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2540:77.05-78.22
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.17m\)

- Positive factor: True width disclosed \(0.75m\)

- Negative factor: Low-grade silver intercept \(5.1 g/t Ag\)

Evidence · table

> 5.1

Context: 1.17

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.75

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2540

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-69)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2540
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 13.7
- Grade Unit: %
- Intercept: 0.7 m
- True Width: 0.45 m
- From: 77.52 m
- To: 78.22 m
- Intercept Depth: 77.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2540:77.52-78.22
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc sub-interval with true width disclosure contributes positively, despite its narrowness.

- Positive factor: Strong-grade zinc intercept \(13.70% Zn\)

- Positive factor: True width disclosed \(0.45m\)

- Negative factor: Narrow intercept length \(0.70m\)

Evidence · table

> 13.70

Context: 0.70

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.45

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2540

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-70)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2540
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.31
- Grade Unit: %
- Intercept: 0.7 m
- True Width: 0.45 m
- From: 77.52 m
- To: 78.22 m
- Intercept Depth: 77.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2540:77.52-78.22
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead sub-interval with true width disclosure has limited individual significance due to its narrowness and low grade.

- Positive factor: True width disclosed \(0.45m\)

- Negative factor: Low-grade lead intercept \(0.31% Pb\)

- Negative factor: Narrow intercept length \(0.70m\)

Evidence · table

> 0.31

Context: 0.70

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.45

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2540

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-71)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2540
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 7.3
- Grade Unit: g/t
- Intercept: 0.7 m
- True Width: 0.45 m
- From: 77.52 m
- To: 78.22 m
- Intercept Depth: 77.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2540:77.52-78.22
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with true width disclosure has limited individual significance due to its narrowness and low grade.

- Positive factor: True width disclosed \(0.45m\)

- Negative factor: Low-grade silver intercept \(7.3 g/t Ag\)

- Negative factor: Narrow intercept length \(0.70m\)

Evidence · table

> 7.3

Context: 0.70

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.45

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2541

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-72)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2541
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 18.8
- Grade Unit: %
- Intercept: 1.5 m
- True Width: 0.64 m
- From: 110.05 m
- To: 111.55 m
- Intercept Depth: 110.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2541:110.05-111.55
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc intercept with good width and true width disclosure contributes significantly to the Juarez Zone extension.

- Positive factor: Exceptional-grade zinc intercept \(18.80% Zn\)

- Positive factor: Good intercept length \(1.50m\)

- Positive factor: True width disclosed \(0.64m\)

Evidence · table

> 18.80

Context: 1.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.64

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2541

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-73)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2541
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 9.23
- Grade Unit: %
- Intercept: 1.5 m
- True Width: 0.64 m
- From: 110.05 m
- To: 111.55 m
- Intercept Depth: 110.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2541:110.05-111.55
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade lead intercept with good width and true width disclosure contributes significantly to the Juarez Zone extension.

- Positive factor: Strong-grade lead intercept \(9.23% Pb\)

- Positive factor: Good intercept length \(1.50m\)

- Positive factor: True width disclosed \(0.64m\)

Evidence · table

> 9.23

Context: 1.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.64

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2541

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-74)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2541
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 42.1
- Grade Unit: g/t
- Intercept: 1.5 m
- True Width: 0.64 m
- From: 110.05 m
- To: 111.55 m
- Intercept Depth: 110.05 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2541:110.05-111.55
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A moderate-grade silver intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Moderate-grade silver intercept \(42.1 g/t Ag\)

- Positive factor: Good intercept length \(1.50m\)

- Positive factor: True width disclosed \(0.64m\)

Evidence · table

> 42.1

Context: 1.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.64

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2545

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-75)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2545
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 10.69
- Grade Unit: %
- Intercept: 3.5 m
- True Width: 2.57 m
- From: 70.65 m
- To: 74.15 m
- Intercept Depth: 70.65 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2545:70.65-74.15
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A strong-grade zinc intercept with good width and true width disclosure contributes positively to the Juarez Zone extension.

- Positive factor: Strong-grade zinc intercept \(10.69% Zn\)

- Positive factor: Good intercept length \(3.50m\)

- Positive factor: True width disclosed \(2.57m\)

Evidence · table

> 10.69

Context: 3.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.57

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2545

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-76)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2545
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.3
- Grade Unit: %
- Intercept: 3.5 m
- True Width: 2.57 m
- From: 70.65 m
- To: 74.15 m
- Intercept Depth: 70.65 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2545:70.65-74.15
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(3.50m\)

- Positive factor: True width disclosed \(2.57m\)

- Negative factor: Low-grade lead intercept \(0.30% Pb\)

Evidence · table

> 0.30

Context: 3.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.57

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2545

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-77)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2545
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 10
- Grade Unit: g/t
- Intercept: 3.5 m
- True Width: 2.57 m
- From: 70.65 m
- To: 74.15 m
- Intercept Depth: 70.65 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2545:70.65-74.15
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver intercept with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(3.50m\)

- Positive factor: True width disclosed \(2.57m\)

- Negative factor: Low-grade silver intercept \(10.0 g/t Ag\)

Evidence · table

> 10.0

Context: 3.50

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.57

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2545

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-78)

Plomosas Mine · zinc

#### Identity

- Hole ID: UGMJ-2545
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 30.1
- Grade Unit: %
- Intercept: 1 m
- True Width: 0.73 m
- From: 73.15 m
- To: 74.15 m
- Intercept Depth: 70.65 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2545:73.15-74.15
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: An exceptional-grade zinc sub-interval with good width and true width disclosure significantly enhances the overall intercept's value and indicates bonanza grades.

- Positive factor: Exceptional-grade zinc intercept \(30.10% Zn\)

- Positive factor: Good intercept length \(1.00m\)

- Positive factor: True width disclosed \(0.73m\)

Evidence · table

> 30.10

Context: 1.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.73

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2545

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-79)

Plomosas Mine · lead

#### Identity

- Hole ID: UGMJ-2545
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.05
- Grade Unit: %
- Intercept: 1 m
- True Width: 0.73 m
- From: 73.15 m
- To: 74.15 m
- Intercept Depth: 70.65 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2545:73.15-74.15
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade lead sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.00m\)

- Positive factor: True width disclosed \(0.73m\)

- Negative factor: Low-grade lead intercept \(0.05% Pb\)

Evidence · table

> 0.05

Context: 1.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.73

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### UGMJ-2545

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-80)

Plomosas Mine · silver

#### Identity

- Hole ID: UGMJ-2545
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 14.4
- Grade Unit: g/t
- Intercept: 1 m
- True Width: 0.73 m
- From: 73.15 m
- To: 74.15 m
- Intercept Depth: 70.65 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: UGMJ-2545:73.15-74.15
- Mining Method: underground

#### Location

- Location: Juarez Zone
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with good width and true width disclosure has limited individual significance.

- Positive factor: Good intercept length \(1.00m\)

- Positive factor: True width disclosed \(0.73m\)

- Negative factor: Low-grade silver intercept \(14.4 g/t Ag\)

Evidence · table

> 14.4

Context: 1.00

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.73

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-81)

Plomosas Mine · zinc

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 11.6
- Grade Unit: %
- Intercept: 0.4 m
- True Width: 0.33 m
- From: 214.6 m
- To: 215 m
- Intercept Depth: 214.6 m

#### Classification

- Sample Type: drill
- Group ID: And:214.6-215
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 11.6 % zinc is strong against the default band \[18, 10, 5, 2\] %. Grade×width 4.6 %·m is below \(grade alone is strong; the better of the two is used\).

- Positive factor: 11.6 % zinc is strong on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 11.60

Context: And

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.33

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-82)

Plomosas Mine · lead

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 6.88
- Grade Unit: %
- Intercept: 0.4 m
- True Width: 0.33 m
- From: 214.6 m
- To: 215 m
- Intercept Depth: 214.6 m

#### Classification

- Sample Type: drill
- Group ID: And:214.6-215
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 6.88 % lead is strong against the default band \[10, 6, 3, 1\] %. Grade×width 2.8 %·m is below \(grade alone is strong; the better of the two is used\).

- Positive factor: 6.88 % lead is strong on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 6.88

Context: And

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.33

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-83)

Plomosas Mine · silver

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 61.8
- Grade Unit: g/t
- Intercept: 0.4 m
- True Width: 0.33 m
- From: 214.6 m
- To: 215 m
- Intercept Depth: 214.6 m

#### Classification

- Sample Type: drill
- Group ID: And:214.6-215
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 61.8 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 24.7 g/t·m is below \(grade alone is weak; the better of the two is used\).

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 61.8

Context: And

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.33

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-84)

Plomosas Mine · zinc

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 13.02
- Grade Unit: %
- Intercept: 2.5 m
- True Width: 2.02 m
- From: 107.35 m
- To: 109.85 m
- Intercept Depth: 107.35 m

#### Classification

- Sample Type: drill
- Group ID: And:107.35-109.85
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 13.02 % zinc is strong against the default band \[18, 10, 5, 2\] %. Grade×width 32.5 %·m is weak \(grade alone is strong; the better of the two is used\).

- Positive factor: 13.02 % zinc is strong on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 13.02

Context: And

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.02

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-85)

Plomosas Mine · lead

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.57
- Grade Unit: %
- Intercept: 2.5 m
- True Width: 2.02 m
- From: 107.35 m
- To: 109.85 m
- Intercept Depth: 107.35 m

#### Classification

- Sample Type: drill
- Group ID: And:107.35-109.85
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 0.57 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 1.4 %·m is below.

- Negative factor: 0.57 % lead is below the weak threshold \(1 %\) on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 0.57

Context: And

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.02

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-86)

Plomosas Mine · silver

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 7.5
- Grade Unit: g/t
- Intercept: 2.5 m
- True Width: 2.02 m
- From: 107.35 m
- To: 109.85 m
- Intercept Depth: 107.35 m

#### Classification

- Sample Type: drill
- Group ID: And:107.35-109.85
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 7.5 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 18.8 g/t·m is below.

- Negative factor: 7.5 g/t silver is below the weak threshold \(30 g/t\) on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 7.5

Context: And

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 2.02

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-87)

Plomosas Mine · zinc

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: zinc
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 30.1
- Grade Unit: %
- Intercept: 1 m
- True Width: 0.81 m
- From: 108.85 m
- To: 109.85 m
- Intercept Depth: 108.85 m

#### Classification

- Sample Type: drill
- Group ID: And:108.85-109.85
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 30.1 % zinc is exceptional against the default band \[18, 10, 5, 2\] %. Grade×width 30.1 %·m is weak \(grade alone is exceptional; the better of the two is used\).

- Positive factor: 30.1 % zinc is exceptional on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 30.10

Context: Including

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.81

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-88)

Plomosas Mine · lead

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: lead
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 0.27
- Grade Unit: %
- Intercept: 1 m
- True Width: 0.81 m
- From: 108.85 m
- To: 109.85 m
- Intercept Depth: 108.85 m

#### Classification

- Sample Type: drill
- Group ID: And:108.85-109.85
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 0.27 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.3 %·m is below.

- Negative factor: 0.27 % lead is below the weak threshold \(1 %\) on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 0.27

Context: Including

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.81

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

### And

[Link to this fact](https://atlas-extractions.minestarters.com/news/impact-silver-intersects-10-38-zinc-over-3-94m-including-20-95-zinc-over-1-70m-a--1e8ff934-cdb1-4aa7-a552-c7c66c1ef4f1#fact-drill-facts-89)

Plomosas Mine · silver

#### Identity

- Hole ID: And
- Project: Plomosas Mine
- Commodity: silver
- Region: mexico
- Reported Region: mexico
- Ticker: IPT

#### Geometry

- Grade: 14
- Grade Unit: g/t
- Intercept: 1 m
- True Width: 0.81 m
- From: 108.85 m
- To: 109.85 m
- Intercept Depth: 108.85 m

#### Classification

- Sample Type: drill
- Group ID: And:108.85-109.85
- Mining Method: underground

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2025-07-07T00:00:00.000Z

Reasoning: Expanded from assay table. 14 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 14.0 g/t·m is below.

- Negative factor: 14 g/t silver is below the weak threshold \(30 g/t\) on the default band.

- Negative factor: Scored from rubric bands during table expansion, not from document context.

Evidence · table

> 14.0

Context: Including

#### Tags used in scoring

**True Width Disclosed**

Polarity: positive

Definition: Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true\_width\_m is 0.81

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "To the south, the Capire Project includes a 200 tpd processing pilot plant adjacent to an open pit silver mine with an N"

## How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.