Intrepid Metals Identifies New Mineralization 1km East of Existing Mineralization at Corral Copper
Original announcement by tmx on
- Company
- Intrepid Metals Corp.
- Ticker
- INTR
- Exchange
- TSX
- Region
- Cochise County, Arizona
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-14 07:16:01 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Intrepid Metals announced assay results from the final two drill holes of its 2025 campaign at the Corral Copper Property. Hole CC25_045, drilled 1km east of the Ringo Zone in an untested area, confirmed anomalous base and precious metals over significant intervals, marking a new discovery. Hole CC25_046 returned 55.50m at 0.37% Cu, 0.56 gpt Au, and 9.01 gpt Ag (1.13% CuEq), including a higher-grade sub-interval.
Reasoning: Initial drilling in a new zone 1km east of the Ringo Zone confirmed base and precious metal mineralization with similar geological characteristics, indicating significant exploration potential for a larger system, despite moderate initial grades.
Positive factors
- Discovery of new mineralization zone 1km east of existing Ringo Zone
- Geological features observed are similar to Ringo, suggesting a consistent mineralizing system
- New zone will be prioritized for drill delineation in 2026
Negative factors
- Initial grades in the new zone are not yet at historical levels
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 24
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Hole CC25_045 was drilled approximately 1 kilometer to the east of the Ringo Zone, in an untested part of the Property, confirming new mineralization.
Evidence · text
“One of these holes was drilled approximately 1 kilometer (" km ") to the east of the Ringo Zone, in an untested part of the Property and it confirmed anomalous base and precious metals over significant intervals.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed 'Quality Assurance and Quality Control' section describing sample handling, lab procedures, and insertion of blanks, duplicates, and standards.
Evidence · text
“Quality Assurance and Quality Control Drill core was first reviewed by a geologist, who identified and marked intervals for sampling. The marked sample intervals were then cut in half with a diamond saw; half of the core was left in the core box and the other half was removed, placed in plastic bags, sealed and labeled. Intervals and unique sample numbers are recorded on the drill logs and the samples are sequenced with standards and blanks inserted according to a predefined QA/QC procedure.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The document clearly states that composite intervals are calculated using length weighted averages based on a 0.10% CuEq cutoff and include a maximum of 10 meters of internal dilution.
Evidence · text
“Composite intervals are calculated using length weighted averages based on a combination of lithological breaks and copper, gold, silver and zinc assay values according to a 0.10% CuEq (see below) cutoff and include a maximum of 10 meters of internal dilution.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The release explicitly states that all intervals reported are down hole core lengths, and true thicknesses have yet to be determined.
Evidence · text
“All intervals reported are down hole core lengths, and true thicknesses have yet to be determined.”
Extracted facts
Stored fact records: 24. Some facts used in scoring do not have a stored record.
Drill Results (24)
CC25_045Corral · copperGrade: 0.02Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 8 m
- From
- 77 m
- To
- 85 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:77-85
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept from the new exploration zone, indicating presence of mineralization but not economic grades.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Low copper grade
Evidence · table
“0.02”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.01Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2 m
- From
- 103 m
- To
- 105 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:103-105
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Very low-grade and narrow copper intercept from the new exploration zone, indicating minimal mineralization.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Very low copper grade
- Narrow intercept
Evidence · table
“0.01”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.03Grade Unit: %Intercept: 11 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 11 m
- From
- 121 m
- To
- 132 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:121-132
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept from the new exploration zone, indicating presence of mineralization but not economic grades.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Low copper grade
Evidence · table
“0.03”
Context: 11.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.09Grade Unit: %Intercept: 18.75 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 18.75 m
- From
- 140 m
- To
- 158.75 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:140-158.75
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept over a moderate width from the new exploration zone, indicating broader mineralization.
Positive factors
- Part of initial drilling in a new zone
- Moderate intercept length
Negative factors
- Low copper grade
Evidence · table
“0.09”
Context: 18.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.11Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 13 m
- From
- 144 m
- To
- 157 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:144-157
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper sub-interval from the new exploration zone, confirming mineralization over a notable width.
Positive factors
- Part of initial drilling in a new zone
- Moderate intercept length
- Slightly higher grade than surrounding interval
Negative factors
- Low copper grade
Evidence · table
“0.11”
Context: 13.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.09Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2 m
- From
- 170 m
- To
- 172 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:170-172
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade and narrow copper intercept from the new exploration zone, indicating minor mineralization.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Low copper grade
- Narrow intercept
Evidence · table
“0.09”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.04Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2 m
- From
- 178 m
- To
- 180 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:178-180
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Very low-grade and narrow copper intercept from the new exploration zone, indicating minimal mineralization.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Very low copper grade
- Narrow intercept
Evidence · table
“0.04”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.03Grade Unit: %Intercept: 19.4 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19.4 m
- From
- 184.6 m
- To
- 204 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:184.6-204
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Very low-grade copper intercept over a long width from the new exploration zone, indicating broad but weak mineralization.
Positive factors
- Part of initial drilling in a new zone
- Long intercept length
Negative factors
- Very low copper grade
Evidence · table
“0.03”
Context: 19.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 208 m
- To
- 212 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:208-212
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Very low-grade and narrow copper intercept from the new exploration zone, indicating minimal mineralization.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Very low copper grade
- Narrow intercept
Evidence · table
“0.01”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.26Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 4 m
- From
- 220 m
- To
- 224 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:220-224
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Moderate copper grade over a narrow width from the new exploration zone, representing a better intercept in this hole.
Positive factors
- Part of initial drilling in a new zone
- Higher copper grade compared to other intercepts in this hole
Negative factors
- Narrow intercept
Evidence · table
“0.26”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 232 m
- To
- 236 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:232-236
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Very low-grade and narrow copper intercept from the new exploration zone, indicating minimal mineralization.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Very low copper grade
- Narrow intercept
Evidence · table
“0.01”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_045Corral · copperGrade: 0.05Grade Unit: %Intercept: 6.25 mView all detailsHide details
Identity
- Hole ID
- CC25_045
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 6.25 m
- From
- 249.35 m
- To
- 255.6 m
- Hole Depth
- 391.05 m
- Intercept Depth
- 77 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_045:249.35-255.6
Location
- Easting
- 614067
- Northing
- 3513972
- Elevation
- 1411 m
- Azimuth
- 215 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept from the new exploration zone, indicating presence of mineralization but not economic grades.
Positive factors
- Part of initial drilling in a new zone
Negative factors
- Low copper grade
Evidence · table
“0.05”
Context: 6.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.07Grade Unit: %Intercept: 11 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 11 m
- From
- 23.5 m
- To
- 34.5 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:23.5-34.5
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.08
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept over a moderate width, indicating presence of mineralization.
Positive factors
- Moderate intercept length
Negative factors
- Low copper grade
Evidence · table
“0.07”
Context: 11.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.07Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 2 m
- From
- 45 m
- To
- 47 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:45-47
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade and narrow copper intercept, indicating minor mineralization.
Negative factors
- Low copper grade
- Narrow intercept
Evidence · table
“0.07”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.37Grade Unit: %Intercept: 55.5 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 55.5 m
- From
- 62.5 m
- To
- 118 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:62.5-118
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.13
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Strong intercept of moderate copper grade over a significant width with a high CuEq value, indicating good mineralization.
Positive factors
- Strong intercept length
- Moderate copper grade
- High CuEq value
Evidence · table
“0.37”
Context: 55.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.4Grade Unit: %Intercept: 49.3 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 49.3 m
- From
- 63.9 m
- To
- 113.2 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:63.9-113.2
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.25
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Strong sub-interval of moderate copper grade over a significant width with a high CuEq value, indicating robust mineralization.
Positive factors
- Strong intercept length
- Moderate copper grade
- High CuEq value
- Higher grade than parent interval
Evidence · table
“0.40”
Context: 49.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.47Grade Unit: %Intercept: 21.6 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 21.6 m
- From
- 63.9 m
- To
- 85.5 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:63.9-85.5
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.01
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Strong sub-interval of moderate copper grade over a significant width with a high CuEq value, indicating good mineralization.
Positive factors
- Strong intercept length
- Moderate copper grade
- High CuEq value
Evidence · table
“0.47”
Context: 21.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.88Grade Unit: %Intercept: 7.2 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.88
- Grade Unit
- %
- Intercept
- 7.2 m
- From
- 70.8 m
- To
- 78 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:70.8-78
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Excellent high-grade copper sub-interval with very high CuEq, representing a bonanza intercept within the broader zone.
Positive factors
- High copper grade
- Very high CuEq value
- Significant width for high grade
Evidence · table
“0.88”
Context: 7.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.39Grade Unit: %Intercept: 24.25 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 24.25 m
- From
- 88.95 m
- To
- 113.2 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:88.95-113.2
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.62
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Strong sub-interval of moderate copper grade over a significant width with very high CuEq, indicating robust mineralization.
Positive factors
- Strong intercept length
- Moderate copper grade
- Very high CuEq value
Evidence · table
“0.39”
Context: 24.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 1.13Grade Unit: %Intercept: 4.85 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 1.13
- Grade Unit
- %
- Intercept
- 4.85 m
- From
- 103.35 m
- To
- 108.2 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:103.35-108.2
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.67
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Exceptional high-grade copper sub-interval with extremely high CuEq, representing a bonanza intercept within the broader zone.
Positive factors
- Exceptional copper grade
- Extremely high CuEq value
- Significant width for bonanza grade
Evidence · table
“1.13”
Context: 4.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.09Grade Unit: %Intercept: 54.5 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 54.5 m
- From
- 121 m
- To
- 175.5 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:121-175.5
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept over a significant width, indicating broad but weak mineralization.
Positive factors
- Strong intercept length
Negative factors
- Low copper grade
Evidence · table
“0.09”
Context: 54.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.04Grade Unit: %Intercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 11.5 m
- From
- 140 m
- To
- 151.5 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:140-151.5
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Very low-grade copper sub-interval with a high CuEq value, suggesting significant contribution from other metals.
Positive factors
- Moderate intercept length
- High CuEq value despite low copper grade
Negative factors
- Very low copper grade
Evidence · table
“0.04”
Context: 11.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.07Grade Unit: %Intercept: 51.3 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 51.3 m
- From
- 182.5 m
- To
- 233.8 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:182.5-233.8
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Low-grade copper intercept over a significant width, indicating broad but weak mineralization.
Positive factors
- Strong intercept length
Negative factors
- Low copper grade
Evidence · table
“0.07”
Context: 51.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
CC25_046Corral · copperGrade: 0.24Grade Unit: %Intercept: 7.9 mView all detailsHide details
Identity
- Hole ID
- CC25_046
- Project
- Corral
- Commodity
- copper
- Region
- usa_az
- Reported Region
- usa_az
- Ticker
- INTR
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 7.9 m
- From
- 217.5 m
- To
- 225.4 m
- Hole Depth
- 269.75 m
- Intercept Depth
- 23.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CC25_046:217.5-225.4
Location
- Easting
- 613206
- Northing
- 3513935
- Elevation
- 1423 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-12-22T00:00:00.000Z
Reasoning: Moderate copper grade over a reasonable width, indicating a localized zone of better mineralization.
Positive factors
- Moderate copper grade
- Moderate CuEq value
Evidence · table
“0.24”
Context: 7.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.