K2 Gold Drills Extensive Disseminated Mineralization and Gold-Silver Epithermal Quartz Veins at Si2 Project
Original announcement by tmx on
- Company
- K2 Gold Corporation
- Ticker
- KTO
- Exchange
- TSX
- Region
- Nevada
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results
- Extracted
- 2026-09-18 06:41:48 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
K2 Gold announced results from its 2026 RC drilling program at the Si2 Gold Project in Nevada, confirming a large gold-silver epithermal system with extensive disseminated mineralization and unexpected higher-grade quartz veins. While economic grades were not intersected in this round, the program successfully tested deeper targets and advanced the understanding of the hydrothermal system. The company plans further exploration and is seeking joint venture partners.
Reasoning: The drilling program successfully confirmed a large gold-silver epithermal system with extensive disseminated mineralization and some higher-grade veins, representing a significant step in understanding the project's potential, despite not yet intersecting economic grades.
Positive factors
- Extensive disseminated mineralization confirmed over broad widths
- Identification of unexpected higher-grade gold-silver quartz veins
- Confirmation of a large, robust, and extensive epithermal hydrothermal system
- Good QA/QC procedures disclosed and QP signed off
Negative factors
- Drilling did not intersect economic grades in this round
- Reported widths are drilled widths and may not represent true thickness
- Presence of potentially deleterious elements (As, Sb, Pb, Te, Hg)
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 70
Classification and evidence
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that reported widths are drilled widths and may not represent true thickness.
Evidence · text
“Note that reported widths are drilled widths and may not represent true thickness at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including the insertion of blanks and certified assay standards, and mentions an internationally recognized and accredited analytical services provider.
Evidence · text
“Quality Assurance and Quality Control procedures include the insertion of coarse blanks and certified assay standards into the sample string at a rate of approximately 1/20 (5%).”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The technical information was reviewed and approved by Eric Buitenhuis, M.Sc., P.Geo., K2's QP and Vice President of Exploration.
Evidence · text
“reviewed and approved by Eric Buitenhuis, M.Sc., P.Geo., K2's QP and Vice President of Exploration.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling program was designed to test for mineralization within the 'boiling zone' and confirmed an extensive hydrothermal system over a 1.6 x 1km area, open in all directions, indicating extension beyond previously known limits.
Evidence · text
“This phase of deeper drilling was designed to test for mineralization within the 'boiling zone' modelled by our technical team. The results from this program are very encouraging, with the identification of a robust and extensive hydrothermal system now confirmed by drilling over a 1.6 x 1km area and open in all directions.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: The document mentions 'strong As but weak Hg', 'strongly elevated Te, Sb, and Pb', and 'strong Au-As-Sb-Pb-Te association' in various intercepts, indicating the presence of potentially deleterious elements.
Evidence · text
“highly elevated Ba to 5,272 ppm and consistently high Te ranging from 1.95 to 6.36 ppm in addition to strong As but weak Hg.”
Extracted facts
Stored fact records: 70. Some facts used in scoring do not have a stored record.
Drill Results (70)
SR26001Si2 · goldGrade: 0.068Grade Unit: g/tIntercept: 38.1 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.068
- Grade Unit
- g/t
- Intercept
- 38.1 m
- From
- 356.62 m
- To
- 394.72 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:356.62-394.72
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems, contributing to the overall 'not economic grades' statement.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.068”
Context: 38.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · silverGrade: 0.62Grade Unit: g/tIntercept: 38.1 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.62
- Grade Unit
- g/t
- Intercept
- 38.1 m
- From
- 356.62 m
- To
- 394.72 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:356.62-394.72
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.62”
Context: 38.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · goldGrade: 0.115Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.115
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 365.76 m
- To
- 370.33 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:365.76-370.33
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.115”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · silverGrade: 0.84Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 365.76 m
- To
- 370.33 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:365.76-370.33
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.84”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · goldGrade: 0.133Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.133
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 376.43 m
- To
- 384.05 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:376.43-384.05
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.133”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · silverGrade: 1.37Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 376.43 m
- To
- 384.05 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:376.43-384.05
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.37”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · goldGrade: 0.131Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.131
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 533.4 m
- To
- 544.07 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:533.4-544.07
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.131”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · silverGrade: 1.15Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 533.4 m
- To
- 544.07 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:533.4-544.07
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.15”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · goldGrade: 0.19Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 533.4 m
- To
- 537.97 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:533.4-537.97
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.19”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26001Si2 · silverGrade: 1.6Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26001
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 533.4 m
- To
- 537.97 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 356.62 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26001:533.4-537.97
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.60”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.067Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.067
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 298.7 m
- To
- 310.9 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:298.7-310.9
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.067”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 0.39Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 298.7 m
- To
- 310.9 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:298.7-310.9
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.39”
Context: 12.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.047Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.047
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 324.61 m
- To
- 335.28 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:324.61-335.28
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.047”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 0.12Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 324.61 m
- To
- 335.28 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:324.61-335.28
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.12”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.094Grade Unit: g/tIntercept: 12.19 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.094
- Grade Unit
- g/t
- Intercept
- 12.19 m
- From
- 347.47 m
- To
- 359.66 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:347.47-359.66
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.094”
Context: 12.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 0.14Grade Unit: g/tIntercept: 12.19 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 12.19 m
- From
- 347.47 m
- To
- 359.66 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:347.47-359.66
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.14”
Context: 12.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.156Grade Unit: g/tIntercept: 6.09 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.156
- Grade Unit
- g/t
- Intercept
- 6.09 m
- From
- 349 m
- To
- 355.09 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:349-355.09
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.156”
Context: 6.09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 0.16Grade Unit: g/tIntercept: 6.09 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 6.09 m
- From
- 349 m
- To
- 355.09 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:349-355.09
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.16”
Context: 6.09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.056Grade Unit: g/tIntercept: 67.06 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.056
- Grade Unit
- g/t
- Intercept
- 67.06 m
- From
- 377.95 m
- To
- 445.01 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:377.95-445.01
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.056”
Context: 67.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 1.25Grade Unit: g/tIntercept: 67.06 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 67.06 m
- From
- 377.95 m
- To
- 445.01 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:377.95-445.01
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.25”
Context: 67.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.192Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.192
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 391.67 m
- To
- 394.72 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:391.67-394.72
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.192”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 1.89Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.89
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 391.67 m
- To
- 394.72 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:391.67-394.72
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.89”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · goldGrade: 0.115Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.115
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 405.38 m
- To
- 409.96 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:405.38-409.96
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.115”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26002Si2 · silverGrade: 5.38Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26002
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 5.38
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 405.38 m
- To
- 409.96 m
- Hole Depth
- 562.36 m
- Intercept Depth
- 298.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26002:405.38-409.96
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423592
- Northing
- 4233307
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1839 m
- Azimuth
- 140 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“5.38”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26003Si2 · goldGrade: 0.072Grade Unit: g/tIntercept: 6.09 mView all detailsHide details
Identity
- Hole ID
- SR26003
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.072
- Grade Unit
- g/t
- Intercept
- 6.09 m
- From
- 452.63 m
- To
- 458.72 m
- Hole Depth
- 460.25 m
- Intercept Depth
- 452.63 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26003:452.63-458.72
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424307
- Northing
- 4234629
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1791 m
- Azimuth
- 70 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.072”
Context: 6.09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26003Si2 · silverGrade: 0.48Grade Unit: g/tIntercept: 6.09 mView all detailsHide details
Identity
- Hole ID
- SR26003
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 6.09 m
- From
- 452.63 m
- To
- 458.72 m
- Hole Depth
- 460.25 m
- Intercept Depth
- 452.63 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26003:452.63-458.72
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424307
- Northing
- 4234629
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1791 m
- Azimuth
- 70 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.48”
Context: 6.09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26004Si2 · goldGrade: 0.139Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- SR26004
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.139
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 233.17 m
- To
- 243.84 m
- Hole Depth
- 281.94 m
- Intercept Depth
- 233.17 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26004:233.17-243.84
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 140 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems, further impacted by the hole being lost.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
- Hole lost, limiting full assessment of potential
Evidence · table
“0.139”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26004Si2 · silverGrade: 2Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- SR26004
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 233.17 m
- To
- 243.84 m
- Hole Depth
- 281.94 m
- Intercept Depth
- 233.17 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26004:233.17-243.84
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 140 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems, further impacted by the hole being lost.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
- Hole lost, limiting full assessment of potential
Evidence · table
“2.00”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · goldGrade: 0.058Grade Unit: g/tIntercept: 64 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.058
- Grade Unit
- g/t
- Intercept
- 64 m
- From
- 242.32 m
- To
- 306.32 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:242.32-306.32
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.058”
Context: 64.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · silverGrade: 0.76Grade Unit: g/tIntercept: 64 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 64 m
- From
- 242.32 m
- To
- 306.32 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:242.32-306.32
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.76”
Context: 64.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · goldGrade: 0.157Grade Unit: g/tIntercept: 6.09 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.157
- Grade Unit
- g/t
- Intercept
- 6.09 m
- From
- 288.04 m
- To
- 294.13 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:288.04-294.13
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.157”
Context: 6.09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · silverGrade: 3.27Grade Unit: g/tIntercept: 6.09 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 3.27
- Grade Unit
- g/t
- Intercept
- 6.09 m
- From
- 288.04 m
- To
- 294.13 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:288.04-294.13
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“3.27”
Context: 6.09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · goldGrade: 0.117Grade Unit: g/tIntercept: 73.15 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.117
- Grade Unit
- g/t
- Intercept
- 73.15 m
- From
- 309.37 m
- To
- 382.52 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:309.37-382.52
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.117”
Context: 73.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · silverGrade: 0.96Grade Unit: g/tIntercept: 73.15 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 73.15 m
- From
- 309.37 m
- To
- 382.52 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:309.37-382.52
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.96”
Context: 73.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · goldGrade: 0.159Grade Unit: g/tIntercept: 48.77 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.159
- Grade Unit
- g/t
- Intercept
- 48.77 m
- From
- 312.42 m
- To
- 361.19 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:312.42-361.19
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.159”
Context: 48.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · silverGrade: 1.27Grade Unit: g/tIntercept: 48.77 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 48.77 m
- From
- 312.42 m
- To
- 361.19 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:312.42-361.19
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.27”
Context: 48.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · goldGrade: 0.206Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.206
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 312.42 m
- To
- 321.56 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:312.42-321.56
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.206”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · silverGrade: 0.98Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 312.42 m
- To
- 321.56 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:312.42-321.56
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.98”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · goldGrade: 0.31Grade Unit: g/tIntercept: 9.15 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 9.15 m
- From
- 332.23 m
- To
- 341.38 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:332.23-341.38
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak gold grade over a moderate width, at the lower end of typical economic thresholds for epithermal systems.
Negative factors
- Apparent width only, true thickness unknown
Evidence · table
“0.31”
Context: 9.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26005Si2 · silverGrade: 2.96Grade Unit: g/tIntercept: 9.15 mView all detailsHide details
Identity
- Hole ID
- SR26005
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 2.96
- Grade Unit
- g/t
- Intercept
- 9.15 m
- From
- 332.23 m
- To
- 341.38 m
- Hole Depth
- 464.82 m
- Intercept Depth
- 242.32 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26005:332.23-341.38
- Mining Method
- unknown
Location
- Location
- AOI1/2
- Easting
- 423685
- Northing
- 4233171
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1848 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“2.96”
Context: 9.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · goldGrade: 0.123Grade Unit: g/tIntercept: 210.31 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.123
- Grade Unit
- g/t
- Intercept
- 210.31 m
- From
- 327.66 m
- To
- 537.97 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:327.66-537.97
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Very broad interval of consistently elevated gold, indicating significant disseminated mineralization, though below typical economic thresholds.
Positive factors
- Very broad interval of mineralization
- Consistently elevated gold
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.123”
Context: 210.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · silverGrade: 1.08Grade Unit: g/tIntercept: 210.31 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 210.31 m
- From
- 327.66 m
- To
- 537.97 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:327.66-537.97
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Very broad interval of consistently elevated silver, indicating significant disseminated mineralization, though below typical economic thresholds.
Positive factors
- Very broad interval of mineralization
- Consistently elevated silver
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.08”
Context: 210.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · goldGrade: 0.213Grade Unit: g/tIntercept: 18.28 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.213
- Grade Unit
- g/t
- Intercept
- 18.28 m
- From
- 349 m
- To
- 367.28 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:349-367.28
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak gold grade over a moderate width, part of a broader mineralized zone, but still below typical economic thresholds.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.213”
Context: 18.28
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · silverGrade: 2.07Grade Unit: g/tIntercept: 18.28 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 2.07
- Grade Unit
- g/t
- Intercept
- 18.28 m
- From
- 349 m
- To
- 367.28 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:349-367.28
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak silver grade over a moderate width, part of a broader mineralized zone, but still below typical economic thresholds.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“2.07”
Context: 18.28
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · goldGrade: 0.493Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.493
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 349 m
- To
- 353.56 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:349-353.56
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow width, representing a higher-grade sub-interval within a broader zone of mineralization.
Positive factors
- Higher gold grade within a broader interval
Negative factors
- Apparent width only, true thickness unknown
Evidence · table
“0.493”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · silverGrade: 5.01Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 5.01
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 349 m
- To
- 353.56 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:349-353.56
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak silver grade over a narrow width, representing a higher-grade sub-interval within a broader zone of mineralization.
Positive factors
- Higher silver grade within a broader interval
Negative factors
- Apparent width only, true thickness unknown
Evidence · table
“5.01”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · goldGrade: 0.161Grade Unit: g/tIntercept: 102.1 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.161
- Grade Unit
- g/t
- Intercept
- 102.1 m
- From
- 394.72 m
- To
- 496.82 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:394.72-496.82
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a very broad width, indicating significant disseminated mineralization, though below typical economic thresholds.
Positive factors
- Very broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.161”
Context: 102.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · silverGrade: 1.38Grade Unit: g/tIntercept: 102.1 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 102.1 m
- From
- 394.72 m
- To
- 496.82 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:394.72-496.82
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a very broad width, indicating significant disseminated mineralization, though below typical economic thresholds.
Positive factors
- Very broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.38”
Context: 102.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · goldGrade: 0.226Grade Unit: g/tIntercept: 36.57 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.226
- Grade Unit
- g/t
- Intercept
- 36.57 m
- From
- 429.77 m
- To
- 466.34 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:429.77-466.34
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak gold grade over a broad width, part of a broader mineralized zone, but still below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.226”
Context: 36.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · silverGrade: 1.96Grade Unit: g/tIntercept: 36.57 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.96
- Grade Unit
- g/t
- Intercept
- 36.57 m
- From
- 429.77 m
- To
- 466.34 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:429.77-466.34
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak silver grade over a broad width, part of a broader mineralized zone, but still below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“1.96”
Context: 36.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · goldGrade: 0.3Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 432.82 m
- To
- 440.44 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:432.82-440.44
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak gold grade over a moderate width, at the lower end of typical economic thresholds for epithermal systems.
Negative factors
- Apparent width only, true thickness unknown
Evidence · table
“0.30”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26006Si2 hosts a preserved epithermal · silverGrade: 2.68Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- SR26006
- Project
- Si2 hosts a preserved epithermal
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 2.68
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 432.82 m
- To
- 440.44 m
- Hole Depth
- 537.97 m
- Intercept Depth
- 327.66 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26006:432.82-440.44
- Mining Method
- unknown
Location
- Location
- AOI4
- Easting
- 424363
- Northing
- 4234507
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 135 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Weak silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“2.68”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26007Si2 · goldGrade: 0.054Grade Unit: g/tIntercept: 35.05 mView all detailsHide details
Identity
- Hole ID
- SR26007
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.054
- Grade Unit
- g/t
- Intercept
- 35.05 m
- From
- 399.29 m
- To
- 434.34 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 399.29 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26007:399.29-434.34
- Mining Method
- unknown
Location
- Location
- AOI5
- Easting
- 424307
- Northing
- 4234629
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1791 m
- Azimuth
- 65 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.054”
Context: 35.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26007Si2 · silverGrade: 0.52Grade Unit: g/tIntercept: 35.05 mView all detailsHide details
Identity
- Hole ID
- SR26007
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 35.05 m
- From
- 399.29 m
- To
- 434.34 m
- Hole Depth
- 544.07 m
- Intercept Depth
- 399.29 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26007:399.29-434.34
- Mining Method
- unknown
Location
- Location
- AOI5
- Easting
- 424307
- Northing
- 4234629
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1791 m
- Azimuth
- 65 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.52”
Context: 35.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 1.286Grade Unit: g/tIntercept: 3.04 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 1.286
- Grade Unit
- g/t
- Intercept
- 3.04 m
- From
- 196.6 m
- To
- 199.64 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:196.6-199.64
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow width, representing an unexpected higher-grade vein, which is a positive exploration result.
Positive factors
- Moderate gold grade for epithermal deposit
- Unexpected higher-grade vein
Negative factors
- Narrow width
- Apparent width only, true thickness unknown
Evidence · table
“1.286”
Context: 3.04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 4.46Grade Unit: g/tIntercept: 3.04 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 4.46
- Grade Unit
- g/t
- Intercept
- 3.04 m
- From
- 196.6 m
- To
- 199.64 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:196.6-199.64
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Narrow width
- Apparent width only, true thickness unknown
Evidence · table
“4.46”
Context: 3.04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 2.367Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 2.367
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 196.6 m
- To
- 198.12 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:196.6-198.12
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Strong gold grade over a very narrow width, representing a significant and unexpected higher-grade vein intercept.
Positive factors
- Strong gold grade for epithermal deposit
- Unexpected higher-grade vein
Negative factors
- Very narrow width
- Apparent width only, true thickness unknown
Evidence · table
“2.367”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 8.13Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 8.13
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 196.6 m
- To
- 198.12 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:196.6-198.12
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a very narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Very narrow width
- Apparent width only, true thickness unknown
Evidence · table
“8.13”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 0.063Grade Unit: g/tIntercept: 124.97 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.063
- Grade Unit
- g/t
- Intercept
- 124.97 m
- From
- 234.69 m
- To
- 359.66 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:234.69-359.66
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Very broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.063”
Context: 124.97
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 0.39Grade Unit: g/tIntercept: 124.97 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 124.97 m
- From
- 234.69 m
- To
- 359.66 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:234.69-359.66
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a very broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Very broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.39”
Context: 124.97
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 0.124Grade Unit: g/tIntercept: 57.91 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.124
- Grade Unit
- g/t
- Intercept
- 57.91 m
- From
- 365.76 m
- To
- 423.67 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:365.76-423.67
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.124”
Context: 57.91
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 0.77Grade Unit: g/tIntercept: 57.91 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 57.91 m
- From
- 365.76 m
- To
- 423.67 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:365.76-423.67
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a broad width, indicating extensive disseminated mineralization but below typical economic thresholds.
Positive factors
- Broad interval of mineralization
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.77”
Context: 57.91
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 0.232Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.232
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 368.81 m
- To
- 373.38 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:368.81-373.38
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.232”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 4.26Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 4.26
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 368.81 m
- To
- 373.38 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:368.81-373.38
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“4.26”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 0.164Grade Unit: g/tIntercept: 12.19 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.164
- Grade Unit
- g/t
- Intercept
- 12.19 m
- From
- 376.43 m
- To
- 388.62 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:376.43-388.62
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.164”
Context: 12.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 0.82Grade Unit: g/tIntercept: 12.19 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 12.19 m
- From
- 376.43 m
- To
- 388.62 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:376.43-388.62
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.82”
Context: 12.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 0.169Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.169
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 394.72 m
- To
- 403.86 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:394.72-403.86
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.169”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 0.79Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 394.72 m
- To
- 403.86 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:394.72-403.86
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.79”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · goldGrade: 0.146Grade Unit: g/tIntercept: 9.15 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.146
- Grade Unit
- g/t
- Intercept
- 9.15 m
- From
- 413 m
- To
- 422.15 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:413-422.15
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low gold grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low gold grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.146”
Context: 9.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
SR26008Si2 · silverGrade: 0.23Grade Unit: g/tIntercept: 9.15 mView all detailsHide details
Identity
- Hole ID
- SR26008
- Project
- Si2
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- KTO
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 9.15 m
- From
- 413 m
- To
- 422.15 m
- Hole Depth
- 475.49 m
- Intercept Depth
- 196.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- SR26008:413-422.15
- Mining Method
- unknown
Location
- Location
- AOI3
- Easting
- 424601
- Northing
- 4233966
- CRS
- UTM NAD83 Z11
- EPSG
- 26911
- Elevation
- 1785 m
- Azimuth
- 165 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic, antimony, lead, tellurium, mercury
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-18T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds for epithermal systems.
Negative factors
- Low silver grade for epithermal deposit
- Apparent width only, true thickness unknown
Evidence · table
“0.23”
Context: 9.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.