KLDC Expands Multi-Phase Gold System and Secures OJEP Funding
Original announcement by tmx on
- Company
- Kirkland Lake Discoveries Corp.
- Ticker
- KLDC
- Exchange
- TSX
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- Copper, Zinc, Silver
- Document categories
- Drill results, Capital raise
- Extracted
- 2026-09-16 06:54:12 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Kirkland Lake Discoveries Corp. announced new drill results from its KL West Project, which continue to expand the footprint of a large-scale, multi-phase gold-bearing hydrothermal system. The company also secured $215,000 in non-dilutive funding from the Ontario Junior Exploration Program. The results highlight widespread mineralization and the use of geochemical vectoring to identify potential higher-grade core zones within the system.
Reasoning: KLDC reports new drill results confirming a large-scale, multi-phase gold-bearing hydrothermal system with significant zinc intercepts (if g/t is the correct unit), and has secured non-dilutive funding, supporting ongoing exploration and vectoring towards higher-grade zones.
Positive factors
- Expanded footprint of large-scale gold-bearing hydrothermal system
- Clear evidence of multi-phase mineralization (IRGS/VMS)
- Geochemical vectoring providing predictive framework for targeting higher-grade zones
- Secured non-dilutive provincial funding ($215,000)
- Qualified Person (QP) signed off on technical information
- QA/QC procedures (blanks, standards, check assays) disclosed
Negative factors
- Many assay results pending (38 holes)
- True width of intercepts is estimated, not precisely stated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm' for similar ranges)
- Individual gold, copper, and silver grades are not exceptionally high
- Higher-grade intercepts are over narrow widths
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 36
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a 'Quality Control Statement' detailing industry-standard fire assay and ICP-AES/ICP-MS techniques, insertion of certified reference standards and blanks, and re-analysis of selected samples.
Evidence · text
“Quality Control Statement True widths are estimated at approximately 65-80% of the reported core length intervals. Assays are uncut except where indicated. All NQ drill core samples were analyzed at ALS Laboratories in Ontario, Québec, and British Columbia. Gold analyses were completed using industry-standard fire assay methods with atomic absorption finish, with selected samples re-analyzed using gravimetric methods where warranted. Multi-element analyses were conducted using industry-standard ICP-AES and ICP-MS techniques. Selected intervals were also analyzed using portable X-ray fluorescence (pXRF) for rapid multi-element screening and geological interpretation; pXRF results are considered semi-quantitative and are not used for reporting compliant assay results. Drill program design, Quality Assurance/Quality Control ("QA/QC"), and interpretation of results were conducted by qualified persons employing a QA/QC program consistent with National Instrument 43-101 and industry best practices. Certified reference standards and blanks were inserted into the sample stream at regular intervals, approximately one control sample per twenty samples, to monitor analytical accuracy and precision.”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document states that 'True widths are estimated at approximately 65-80% of the reported core length intervals', providing a general estimate for true width.
Evidence · text
“True widths are estimated at approximately 65-80% of the reported core length intervals.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The results from Sharp Target are stated to 'extend the Winnie Lake hydrothermal envelope by more than one kilometre to the southeast, demonstrating strong lateral continuity'.
Evidence · text
“These results extend the Winnie Lake hydrothermal envelope by more than one kilometre to the southeast, demonstrating strong lateral continuity.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The assay table includes rows marked 'No Significant Values' but does not state the cut-off grade used for reporting significant intercepts.
Evidence · table
“No Significant Values”
Context: KLD25-41
Extracted facts
Stored fact records: 36. Some facts used in scoring do not have a stored record.
Drill Results (36)
KLD25-42Winnie Lake · goldGrade: 0.59Grade Unit: g/tIntercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 0.25 m
- From
- 224.5 m
- To
- 224.75 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:224.5-224.75
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a low gold grade, but contributes to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Low gold grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.59”
Context: 0.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · copperGrade: 0.03Grade Unit: %Intercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.25 m
- From
- 224.5 m
- To
- 224.75 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:224.5-224.75
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.03”
Context: 0.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · zincGrade: 13Grade Unit: g/tIntercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 13
- Grade Unit
- g/t
- Intercept
- 0.25 m
- From
- 224.5 m
- To
- 224.75 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:224.5-224.75
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a moderate zinc grade (if g/t is the correct unit), contributing to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“13.00”
Context: 0.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · silverGrade: 4.22Grade Unit: g/tIntercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 4.22
- Grade Unit
- g/t
- Intercept
- 0.25 m
- From
- 224.5 m
- To
- 224.75 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:224.5-224.75
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Narrow intercept length
- True width estimated
Evidence · table
“4.22”
Context: 0.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · goldGrade: 0.28Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 227 m
- To
- 233 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:227-233
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a low gold grade, contributing to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Low gold grade
- True width estimated
Evidence · table
“0.28”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · copperGrade: 0.02Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 6 m
- From
- 227 m
- To
- 233 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:227-233
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- True width estimated
Evidence · table
“0.02”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · zincGrade: 20.83Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 20.83
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 227 m
- To
- 233 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:227-233
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a moderate zinc grade (if g/t is the correct unit), contributing to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“20.83”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · silverGrade: 3Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 227 m
- To
- 233 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:227-233
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- True width estimated
Evidence · table
“3.00”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · goldGrade: 0.38Grade Unit: g/tIntercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 1.03 m
- From
- 395.47 m
- To
- 396.5 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:395.47-396.5
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a low gold grade, contributing to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Low gold grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.38”
Context: 1.03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · copperGrade: 0.09Grade Unit: %Intercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.03 m
- From
- 395.47 m
- To
- 396.5 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:395.47-396.5
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.09”
Context: 1.03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · zincGrade: 10.09Grade Unit: g/tIntercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 10.09
- Grade Unit
- g/t
- Intercept
- 1.03 m
- From
- 395.47 m
- To
- 396.5 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:395.47-396.5
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a moderate zinc grade (if g/t is the correct unit), contributing to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“10.09”
Context: 1.03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-42Winnie Lake · silverGrade: 2.34Grade Unit: g/tIntercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KLD25-42
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 2.34
- Grade Unit
- g/t
- Intercept
- 1.03 m
- From
- 395.47 m
- To
- 396.5 m
- Hole Depth
- 411 m
- Intercept Depth
- 224.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-42:395.47-396.5
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Narrow intercept length
- True width estimated
Evidence · table
“2.34”
Context: 1.03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-43Winnie Lake · goldGrade: 0.32Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- KLD25-43
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 182 m
- To
- 186 m
- Hole Depth
- 477 m
- Intercept Depth
- 182 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-43:182-186
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a low gold grade, contributing to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Low gold grade
- True width estimated
Evidence · table
“0.32”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-43Winnie Lake · copperGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- KLD25-43
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 182 m
- To
- 186 m
- Hole Depth
- 477 m
- Intercept Depth
- 182 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-43:182-186
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- True width estimated
Evidence · table
“0.01”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-43Winnie Lake · zincGrade: 39.31Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- KLD25-43
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 39.31
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 182 m
- To
- 186 m
- Hole Depth
- 477 m
- Intercept Depth
- 182 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-43:182-186
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a moderate zinc grade (if g/t is the correct unit), contributing to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- Moderate zinc grade (if g/t is correct unit)
- QA/QC disclosed
- QP signed
Negative factors
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“39.31”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD25-43Winnie Lake · silverGrade: 0.7Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- KLD25-43
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 182 m
- To
- 186 m
- Hole Depth
- 477 m
- Intercept Depth
- 182 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD25-43:182-186
- Mining Method
- unknown
Location
- Easting
- 564089
- Northing
- 5336893
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A moderate width intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- True width estimated
Evidence · table
“0.70”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-47Winnie Lake · goldGrade: 0.01Grade Unit: g/tIntercept: 1.38 mView all detailsHide details
Identity
- Hole ID
- KLD26-47
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.38 m
- From
- 216.81 m
- To
- 218.19 m
- Hole Depth
- 402 m
- Intercept Depth
- 216.81 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-47:216.81-218.19
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low gold grade, contributing to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low gold grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.01”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-47Winnie Lake · copperGrade: 0.5Grade Unit: %Intercept: 1.38 mView all detailsHide details
Identity
- Hole ID
- KLD26-47
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 1.38 m
- From
- 216.81 m
- To
- 218.19 m
- Hole Depth
- 402 m
- Intercept Depth
- 216.81 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-47:216.81-218.19
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a moderate copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- Moderate copper grade
- QA/QC disclosed
- QP signed
Negative factors
- Narrow intercept length
- True width estimated
Evidence · table
“0.50”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-47Winnie Lake · zincGrade: 119.89Grade Unit: g/tIntercept: 1.38 mView all detailsHide details
Identity
- Hole ID
- KLD26-47
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 119.89
- Grade Unit
- g/t
- Intercept
- 1.38 m
- From
- 216.81 m
- To
- 218.19 m
- Hole Depth
- 402 m
- Intercept Depth
- 216.81 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-47:216.81-218.19
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with an exceptionally high zinc grade (if g/t is the correct unit), contributing significantly to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- Exceptional zinc grade (if g/t is correct unit)
- QA/QC disclosed
- QP signed
Negative factors
- Narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“119.89”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-47Winnie Lake · silverGrade: 0.3Grade Unit: g/tIntercept: 1.38 mView all detailsHide details
Identity
- Hole ID
- KLD26-47
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 1.38 m
- From
- 216.81 m
- To
- 218.19 m
- Hole Depth
- 402 m
- Intercept Depth
- 216.81 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-47:216.81-218.19
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.30”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · goldGrade: 1.58Grade Unit: g/tIntercept: 3.23 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 1.58
- Grade Unit
- g/t
- Intercept
- 3.23 m
- From
- 259.67 m
- To
- 262.9 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-262.9
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a moderate gold grade, contributing to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- Moderate gold grade
- QA/QC disclosed
- QP signed
Negative factors
- Narrow intercept length
- True width estimated
Evidence · table
“1.58”
Context: 3.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · copperGrade: 0.07Grade Unit: %Intercept: 3.23 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 3.23 m
- From
- 259.67 m
- To
- 262.9 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-262.9
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.07”
Context: 3.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · zincGrade: 70.71Grade Unit: g/tIntercept: 3.23 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 70.71
- Grade Unit
- g/t
- Intercept
- 3.23 m
- From
- 259.67 m
- To
- 262.9 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-262.9
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a strong zinc grade (if g/t is the correct unit), contributing significantly to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- Strong zinc grade (if g/t is correct unit)
- QA/QC disclosed
- QP signed
Negative factors
- Narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“70.71”
Context: 3.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · silverGrade: 0.87Grade Unit: g/tIntercept: 3.23 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 3.23 m
- From
- 259.67 m
- To
- 262.9 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-262.9
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A narrow intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Narrow intercept length
- True width estimated
Evidence · table
“0.87”
Context: 3.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · goldGrade: 2.25Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 2.25
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 259.67 m
- To
- 260.17 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-260.17
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a strong gold grade, contributing to the understanding of higher-grade zones.
Positive factors
- New drill intercept confirming mineralization
- Strong gold grade
- QA/QC disclosed
- QP signed
Negative factors
- Very narrow intercept length
- True width estimated
Evidence · table
“2.25”
Context: 0.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · copperGrade: 0.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 259.67 m
- To
- 260.17 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-260.17
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- Very narrow intercept length
- True width estimated
Evidence · table
“0.10”
Context: 0.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · zincGrade: 68Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 68
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 259.67 m
- To
- 260.17 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-260.17
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a strong zinc grade (if g/t is the correct unit), contributing significantly to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- Strong zinc grade (if g/t is correct unit)
- QA/QC disclosed
- QP signed
Negative factors
- Very narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“68.00”
Context: 0.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · silverGrade: 0.64Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 259.67 m
- To
- 260.17 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:259.67-260.17
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Very narrow intercept length
- True width estimated
Evidence · table
“0.64”
Context: 0.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · goldGrade: 3.2Grade Unit: g/tIntercept: 0.87 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 3.2
- Grade Unit
- g/t
- Intercept
- 0.87 m
- From
- 261.55 m
- To
- 262.42 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:261.55-262.42
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a strong gold grade, contributing to the understanding of higher-grade zones.
Positive factors
- New drill intercept confirming mineralization
- Strong gold grade
- QA/QC disclosed
- QP signed
Negative factors
- Very narrow intercept length
- True width estimated
Evidence · table
“3.20”
Context: 0.87
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · copperGrade: 0.05Grade Unit: %Intercept: 0.87 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.87 m
- From
- 261.55 m
- To
- 262.42 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:261.55-262.42
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a very low copper grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low copper grade
- Very narrow intercept length
- True width estimated
Evidence · table
“0.05”
Context: 0.87
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · zincGrade: 54Grade Unit: g/tIntercept: 0.87 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 54
- Grade Unit
- g/t
- Intercept
- 0.87 m
- From
- 261.55 m
- To
- 262.42 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:261.55-262.42
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a strong zinc grade (if g/t is the correct unit), contributing significantly to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- Strong zinc grade (if g/t is correct unit)
- QA/QC disclosed
- QP signed
Negative factors
- Very narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“54.00”
Context: 0.87
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-48Winnie Lake · silverGrade: 1.04Grade Unit: g/tIntercept: 0.87 mView all detailsHide details
Identity
- Hole ID
- KLD26-48
- Project
- Winnie Lake
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 0.87 m
- From
- 261.55 m
- To
- 262.42 m
- Hole Depth
- 459 m
- Intercept Depth
- 259.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-48:261.55-262.42
- Mining Method
- unknown
Location
- Easting
- 564221
- Northing
- 5337161
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow sub-interval with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Very narrow intercept length
- True width estimated
Evidence · table
“1.04”
Context: 0.87
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-51Nine Mile · goldGrade: 0.73Grade Unit: g/tIntercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- KLD26-51
- Project
- Nine Mile
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 0.52 m
- From
- 238.54 m
- To
- 239.06 m
- Hole Depth
- 357 m
- Intercept Depth
- 238.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-51:238.54-239.06
- Mining Method
- unknown
Location
- Easting
- 563592
- Northing
- 5342704
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow intercept with a low gold grade, contributing to the overall understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Low gold grade
- Very narrow intercept length
- True width estimated
Evidence · table
“0.73”
Context: 0.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-51Nine Mile · zincGrade: 45Grade Unit: g/tIntercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- KLD26-51
- Project
- Nine Mile
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 45
- Grade Unit
- g/t
- Intercept
- 0.52 m
- From
- 238.54 m
- To
- 239.06 m
- Hole Depth
- 357 m
- Intercept Depth
- 238.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-51:238.54-239.06
- Mining Method
- unknown
Location
- Easting
- 563592
- Northing
- 5342704
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow intercept with an exceptionally high zinc grade (if g/t is the correct unit), contributing significantly to the multi-element understanding of the system, but with unit ambiguity.
Positive factors
- New drill intercept confirming mineralization
- Exceptional zinc grade (if g/t is correct unit)
- QA/QC disclosed
- QP signed
Negative factors
- Very narrow intercept length
- True width estimated
- Discrepancy in zinc unit (table header 'Zn g/t' vs. text implying 'ppm')
Evidence · table
“45.00”
Context: 0.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-51Nine Mile · silverGrade: 0.26Grade Unit: g/tIntercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- KLD26-51
- Project
- Nine Mile
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 0.52 m
- From
- 238.54 m
- To
- 239.06 m
- Hole Depth
- 357 m
- Intercept Depth
- 238.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- KLD26-51:238.54-239.06
- Mining Method
- unknown
Location
- Easting
- 563592
- Northing
- 5342704
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: A very narrow intercept with a very low silver grade, contributing to the multi-element understanding of the system.
Positive factors
- New drill intercept confirming mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Very low silver grade
- Very narrow intercept length
- True width estimated
Evidence · table
“0.26”
Context: 0.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KLD26-51Winnie Lake · copperGrade: 0Grade Unit: %Intercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- KLD26-51
- Project
- Winnie Lake
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- KLDC
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 0.52 m
- From
- 238.54 m
- To
- 239.06 m
- Intercept Depth
- 238.54 m
Classification
- Sample Type
- drill
- Group ID
- KLD26-51:238.54-239.06
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-30T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: KLD26-51
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.