KTRI Reports on Drill Results from the Two Times Fred Property
Original announcement by tmx on
- Company
- Kootenay Resources Inc.
- Ticker
- KTRI
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results
- Extracted
- 2026-09-18 07:16:25 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Kootenay Resources Inc. reported drill results from the Two Times Fred Property in British Columbia, highlighting a large epithermal vein system with multiple mineralized targets. The program included 35 of 41 diamond drill holes, with the best intercept to date in hole 2XF-22-0041, which returned 14.95 meters of 1.28 g/t gold and 14.6 g/t silver, including higher-grade sub-intervals. The company noted that the vein system is extensive and open in all directions, with assays subject to industry-standard QA/QC protocols.
Reasoning: The drill results confirm a large, prospective epithermal gold-silver system with high-grade intercepts, indicating significant exploration potential. The disclosure of QA/QC and QP sign-off adds credibility, though the early-stage nature and estimated true widths warrant moderate confidence.
Positive factors
- Identification of a large epithermal vein system (3.5 km x 2 km) with significant gold and silver mineralization.
- Multiple mineralized targets (Saki, Gold Hill, Shinju, Borrow Pit, Hidden Hand, Shochu) identified and open in all directions.
- Best drill result to date in hole 2XF-22-0041, indicating high-grade potential.
- QA/QC protocols were followed, and a Qualified Person approved the technical information.
Negative factors
- Drilling is still lightly spaced, requiring further work to confirm continuity.
- True widths are estimated as a range (65-85% of downhole length) rather than explicitly stated for each intercept.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 72
Extracted facts
Stored fact records: 72. Some facts used in scoring do not have a stored record.
Drill Results (72)
2XF-15-01Two Times Fred · goldGrade: 1.66Grade Unit: g/tIntercept: 6.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 1.66
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 8.5 m
- To
- 15.1 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:8.5-15.1
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (1.66 g/t) is moderate for epithermal deposits. Gold GT product (10.96 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“1.66”
Context: 6.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · silverGrade: 30.1Grade Unit: g/tIntercept: 6.6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 30.1
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 8.5 m
- To
- 15.1 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:8.5-15.1
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (30.1 g/t) is weak but mineralized. Silver GT product (198.66 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“30.1”
Context: 6.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · goldGrade: 4.44Grade Unit: g/tIntercept: 0.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 4.44
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 10.3 m
- To
- 11.2 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:10.3-11.2
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (4.44 g/t) is strong for epithermal deposits. Gold GT product (2.22 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“4.44”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · silverGrade: 51.8Grade Unit: g/tIntercept: 0.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 51.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 10.3 m
- To
- 11.2 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:10.3-11.2
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (51.8 g/t) is weak but mineralized. Silver GT product (25.90 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“51.8”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · goldGrade: 4.19Grade Unit: g/tIntercept: 0.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 4.19
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 13.7 m
- To
- 14.5 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:13.7-14.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (4.19 g/t) is strong for epithermal deposits. Gold GT product (3.35 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“4.19”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · silverGrade: 59.1Grade Unit: g/tIntercept: 0.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 59.1
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 13.7 m
- To
- 14.5 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:13.7-14.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (59.1 g/t) is weak but mineralized. Silver GT product (47.28 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“59.1”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · goldGrade: 0.54Grade Unit: g/tIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 27.1 m
- To
- 36.1 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:27.1-36.1
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.54 g/t) is weak but mineralized for epithermal deposits. Gold GT product (4.86 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.54”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-01Two Times Fred · silverGrade: 8.9Grade Unit: g/tIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-01
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 8.9
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 27.1 m
- To
- 36.1 m
- Intercept Depth
- 8.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-01:27.1-36.1
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (8.9 g/t) is below the weak threshold. Silver GT product (80.10 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“8.9”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · goldGrade: 0.83Grade Unit: g/tIntercept: 15.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 12 m
- To
- 27.5 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:12-27.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.83 g/t) is weak but mineralized for epithermal deposits. Gold GT product (12.87 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.83”
Context: 15.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · silverGrade: 14.8Grade Unit: g/tIntercept: 15.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 14.8
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 12 m
- To
- 27.5 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:12-27.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (14.8 g/t) is below the weak threshold. Silver GT product (229.40 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“14.8”
Context: 15.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · goldGrade: 2.1Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24.5 m
- To
- 26.5 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:24.5-26.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (2.10 g/t) is strong for epithermal deposits. Gold GT product (4.20 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“2.10”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · silverGrade: 28.8Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 28.8
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24.5 m
- To
- 26.5 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:24.5-26.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (28.8 g/t) is below the weak threshold. Silver GT product (57.60 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“28.8”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · goldGrade: 0.46Grade Unit: g/tIntercept: 17.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.46
- Grade Unit
- g/t
- Intercept
- 17.5 m
- From
- 45 m
- To
- 62.5 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:45-62.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.46 g/t) is weak but mineralized for epithermal deposits. Gold GT product (8.05 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.46”
Context: 17.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · silverGrade: 10.7Grade Unit: g/tIntercept: 17.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 10.7
- Grade Unit
- g/t
- Intercept
- 17.5 m
- From
- 45 m
- To
- 62.5 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:45-62.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (10.7 g/t) is below the weak threshold. Silver GT product (187.25 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“10.7”
Context: 17.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · goldGrade: 2.52Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 2.52
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 47 m
- To
- 48 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:47-48
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (2.52 g/t) is strong for epithermal deposits. Gold GT product (2.52 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“2.52”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-02Two Times Fred · silverGrade: 58.4Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-02
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 58.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 47 m
- To
- 48 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-02:47-48
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (58.4 g/t) is weak but mineralized. Silver GT product (58.40 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“58.4”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-03Two Times Fred · goldGrade: 0.39Grade Unit: g/tIntercept: 11.06 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-03
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 11.06 m
- From
- 2.44 m
- To
- 13.5 m
- Intercept Depth
- 2.44 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-03:2.44-13.5
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.39 g/t) is weak but mineralized for epithermal deposits. Gold GT product (4.31 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.39”
Context: 11.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-03Two Times Fred · silverGrade: 8.3Grade Unit: g/tIntercept: 11.06 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-03
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 8.3
- Grade Unit
- g/t
- Intercept
- 11.06 m
- From
- 2.44 m
- To
- 13.5 m
- Intercept Depth
- 2.44 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-03:2.44-13.5
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (8.3 g/t) is below the weak threshold. Silver GT product (91.79 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“8.3”
Context: 11.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-03Two Times Fred · goldGrade: 0.4Grade Unit: g/tIntercept: 14.14 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-03
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 14.14 m
- From
- 30.5 m
- To
- 44.64 m
- Intercept Depth
- 2.44 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-03:30.5-44.64
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.40 g/t) is weak but mineralized for epithermal deposits. Gold GT product (5.66 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.40”
Context: 14.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-03Two Times Fred · silverGrade: 8.2Grade Unit: g/tIntercept: 14.14 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-03
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 8.2
- Grade Unit
- g/t
- Intercept
- 14.14 m
- From
- 30.5 m
- To
- 44.64 m
- Intercept Depth
- 2.44 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-03:30.5-44.64
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (8.2 g/t) is below the weak threshold. Silver GT product (115.95 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“8.2”
Context: 14.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-04Two Times Fred · goldGrade: 0.29Grade Unit: g/tIntercept: 24.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-04
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 24.4 m
- From
- 36.6 m
- To
- 61 m
- Intercept Depth
- 36.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-04:36.6-61
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.29 g/t) is below the weak threshold for epithermal deposits. Gold GT product (7.09 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.29”
Context: 24.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-04Two Times Fred · silverGrade: 7.7Grade Unit: g/tIntercept: 24.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-04
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 7.7
- Grade Unit
- g/t
- Intercept
- 24.4 m
- From
- 36.6 m
- To
- 61 m
- Intercept Depth
- 36.6 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-04:36.6-61
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (7.7 g/t) is below the weak threshold. Silver GT product (187.88 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“7.7”
Context: 24.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject =to industry standard QA-QC protocols.”
2XF-15-05Two Times Fred · goldGrade: 0.28Grade Unit: g/tIntercept: 47.05 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 47.05 m
- From
- 4.1 m
- To
- 51.15 m
- Intercept Depth
- 4.1 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-05:4.1-51.15
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.28 g/t) is below the weak threshold for epithermal deposits. Gold GT product (13.17 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.28”
Context: 47.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-05Two Times Fred · silverGrade: 4Grade Unit: g/tIntercept: 47.05 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 47.05 m
- From
- 4.1 m
- To
- 51.15 m
- Intercept Depth
- 4.1 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-05:4.1-51.15
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (4.0 g/t) is below the weak threshold. Silver GT product (188.20 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“4.0”
Context: 47.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-05Two Times Fred · goldGrade: 2.39Grade Unit: g/tIntercept: 0.83 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 2.39
- Grade Unit
- g/t
- Intercept
- 0.83 m
- From
- 7.1 m
- To
- 7.93 m
- Intercept Depth
- 4.1 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-05:7.1-7.93
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (2.39 g/t) is strong for epithermal deposits. Gold GT product (1.98 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“2.39”
Context: 0.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-05Two Times Fred · silverGrade: 8.2Grade Unit: g/tIntercept: 0.83 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 8.2
- Grade Unit
- g/t
- Intercept
- 0.83 m
- From
- 7.1 m
- To
- 7.93 m
- Intercept Depth
- 4.1 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-05:7.1-7.93
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (8.2 g/t) is below the weak threshold. Silver GT product (6.81 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“8.2”
Context: 0.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-07Two Times Fred · goldGrade: 0.43Grade Unit: g/tIntercept: 1.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-07
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 33.7 m
- To
- 35.4 m
- Intercept Depth
- 33.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-07:33.7-35.4
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.43 g/t) is weak but mineralized for epithermal deposits. Gold GT product (0.73 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.43”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-07Two Times Fred · silverGrade: 19.9Grade Unit: g/tIntercept: 1.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-07
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 19.9
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 33.7 m
- To
- 35.4 m
- Intercept Depth
- 33.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-07:33.7-35.4
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (19.9 g/t) is below the weak threshold. Silver GT product (33.83 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“19.9”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · goldGrade: 0.15Grade Unit: g/tIntercept: 62.25 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 62.25 m
- From
- 22.45 m
- To
- 84.7 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:22.45-84.7
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.15 g/t) is below the weak threshold for epithermal deposits. Gold GT product (9.34 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.15”
Context: 62.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · silverGrade: 7.8Grade Unit: g/tIntercept: 62.25 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 7.8
- Grade Unit
- g/t
- Intercept
- 62.25 m
- From
- 22.45 m
- To
- 84.7 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:22.45-84.7
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (7.8 g/t) is below the weak threshold. Silver GT product (485.55 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“7.8”
Context: 62.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · goldGrade: 0.21Grade Unit: g/tIntercept: 23.95 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 23.95 m
- From
- 56.25 m
- To
- 80.2 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:56.25-80.2
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.21 g/t) is below the weak threshold for epithermal deposits. Gold GT product (5.03 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.21”
Context: 23.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · silverGrade: 16.4Grade Unit: g/tIntercept: 23.95 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 16.4
- Grade Unit
- g/t
- Intercept
- 23.95 m
- From
- 56.25 m
- To
- 80.2 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:56.25-80.2
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (16.4 g/t) is below the weak threshold. Silver GT product (392.78 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“16.4”
Context: 23.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · goldGrade: 0.32Grade Unit: g/tIntercept: 5.9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 68.1 m
- To
- 74 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:68.1-74
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.32 g/t) is below the weak threshold for epithermal deposits. Gold GT product (1.89 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.32”
Context: 5.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · silverGrade: 35Grade Unit: g/tIntercept: 5.9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 35
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 68.1 m
- To
- 74 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:68.1-74
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (35.0 g/t) is weak but mineralized. Silver GT product (206.50 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“35.0”
Context: 5.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · goldGrade: 0.63Grade Unit: g/tIntercept: 1.1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 69.5 m
- To
- 70.6 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:69.5-70.6
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.63 g/t) is weak but mineralized for epithermal deposits. Gold GT product (0.69 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.63”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-15-08Two Times Fred · silverGrade: 67.9Grade Unit: g/tIntercept: 1.1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-15-08
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 67.9
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 69.5 m
- To
- 70.6 m
- Intercept Depth
- 22.45 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-15-08:69.5-70.6
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2015-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (67.9 g/t) is weak but mineralized. Silver GT product (74.69 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“67.9”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-01Two Times Fred · goldGrade: 0.37Grade Unit: g/tIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-01
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 101.4 m
- To
- 111.4 m
- Intercept Depth
- 101.4 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-01:101.4-111.4
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.37 g/t) is weak but mineralized for epithermal deposits. Gold GT product (3.70 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.37”
Context: 10.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-01Two Times Fred · silverGrade: 5.7Grade Unit: g/tIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-01
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 5.7
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 101.4 m
- To
- 111.4 m
- Intercept Depth
- 101.4 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-01:101.4-111.4
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (5.7 g/t) is below the weak threshold. Silver GT product (57.00 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“5.7”
Context: 10.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-01Two Times Fred · goldGrade: 0.9Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-01
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109.4 m
- To
- 110.4 m
- Intercept Depth
- 101.4 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-01:109.4-110.4
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.90 g/t) is weak but mineralized for epithermal deposits. Gold GT product (0.90 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.90”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-01Two Times Fred · silverGrade: 11.5Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-01
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 11.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109.4 m
- To
- 110.4 m
- Intercept Depth
- 101.4 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-01:109.4-110.4
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (11.5 g/t) is below the weak threshold. Silver GT product (11.50 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“11.5”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-02Two Times Fred · goldGrade: 0.9Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-02
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 163.5 m
- To
- 165.5 m
- Intercept Depth
- 163.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-02:163.5-165.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.90 g/t) is weak but mineralized for epithermal deposits. Gold GT product (1.80 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.90”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-02Two Times Fred · silverGrade: 11.5Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-02
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 11.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 163.5 m
- To
- 165.5 m
- Intercept Depth
- 163.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-02:163.5-165.5
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (11.5 g/t) is below the weak threshold. Silver GT product (23.00 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“11.5”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-03Two Times Fred · goldGrade: 0.21Grade Unit: g/tIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-03
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 178.5 m
- To
- 187.5 m
- Intercept Depth
- 178.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-03:178.5-187.5
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.21 g/t) is below the weak threshold for epithermal deposits. Gold GT product (1.89 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.21”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-03Two Times Fred · silverGrade: 3.2Grade Unit: g/tIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-03
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 3.2
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 178.5 m
- To
- 187.5 m
- Intercept Depth
- 178.5 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-03:178.5-187.5
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (3.2 g/t) is below the weak threshold. Silver GT product (28.80 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“3.2”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-04Two Times Fred · goldGrade: 0.45Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-04
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 197 m
- To
- 203 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-04:197-203
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.45 g/t) is weak but mineralized for epithermal deposits. Gold GT product (2.70 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.45”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-04Two Times Fred · silverGrade: 2Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-04
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 197 m
- To
- 203 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-04:197-203
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (2.0 g/t) is below the weak threshold. Silver GT product (12.00 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“2.0”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · goldGrade: 0.9Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 9 m
- To
- 10 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:9-10
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.90 g/t) is weak but mineralized for epithermal deposits. Gold GT product (0.90 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.90”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · silverGrade: 31.7Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 31.7
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 9 m
- To
- 10 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:9-10
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (31.7 g/t) is weak but mineralized. Silver GT product (31.70 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“31.7”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · goldGrade: 0.5Grade Unit: g/tIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 18 m
- To
- 36 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:18-36
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.50 g/t) is weak but mineralized for epithermal deposits. Gold GT product (9.00 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.50”
Context: 18.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · silverGrade: 19.3Grade Unit: g/tIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 19.3
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 18 m
- To
- 36 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:18-36
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (19.3 g/t) is below the weak threshold. Silver GT product (347.40 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“19.3”
Context: 18.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · goldGrade: 1.48Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34 m
- To
- 35 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:34-35
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (1.48 g/t) is moderate for epithermal deposits. Gold GT product (1.48 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“1.48”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · silverGrade: 5.4Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 5.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34 m
- To
- 35 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:34-35
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (5.4 g/t) is below the weak threshold. Silver GT product (5.40 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“5.4”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · goldGrade: 0.39Grade Unit: g/tIntercept: 43 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 43 m
- From
- 43 m
- To
- 86 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:43-86
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.39 g/t) is weak but mineralized for epithermal deposits. Gold GT product (16.77 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.39”
Context: 43.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · silverGrade: 6.6Grade Unit: g/tIntercept: 43 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 6.6
- Grade Unit
- g/t
- Intercept
- 43 m
- From
- 43 m
- To
- 86 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:43-86
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (6.6 g/t) is below the weak threshold. Silver GT product (283.80 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“6.6”
Context: 43.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · goldGrade: 0.71Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:48-51
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.71 g/t) is weak but mineralized for epithermal deposits. Gold GT product (2.13 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.71”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · silverGrade: 6.4Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 6.4
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:48-51
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (6.4 g/t) is below the weak threshold. Silver GT product (19.20 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“6.4”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · goldGrade: 0.92Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 67 m
- To
- 69 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:67-69
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.92 g/t) is weak but mineralized for epithermal deposits. Gold GT product (1.84 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.92”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-19-05Two Times Fred · silverGrade: 6.9Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-19-05
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 6.9
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 67 m
- To
- 69 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-19-05:67-69
Location
- Location
- Gold Hill
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2019-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (6.9 g/t) is below the weak threshold. Silver GT product (13.80 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“6.9”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0014Two Times Fred · goldGrade: 0.24Grade Unit: g/tIntercept: 0.37 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0014
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 0.37 m
- From
- 158.13 m
- To
- 158.5 m
- Intercept Depth
- 158.13 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0014:158.13-158.5
Location
- Location
- Exploration
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.24 g/t) is below the weak threshold for epithermal deposits. Gold GT product (0.09 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.24”
Context: 0.37
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0014Two Times Fred · silverGrade: 8.4Grade Unit: g/tIntercept: 0.37 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0014
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 8.4
- Grade Unit
- g/t
- Intercept
- 0.37 m
- From
- 158.13 m
- To
- 158.5 m
- Intercept Depth
- 158.13 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0014:158.13-158.5
Location
- Location
- Exploration
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (8.4 g/t) is below the weak threshold. Silver GT product (3.11 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“8.4”
Context: 0.37
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · goldGrade: 0.76Grade Unit: g/tIntercept: 15 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 64 m
- To
- 79 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:64-79
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.76 g/t) is weak but mineralized for epithermal deposits. Gold GT product (11.40 g/t·m) is weak.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.76”
Context: 15.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · silverGrade: 11.2Grade Unit: g/tIntercept: 15 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 11.2
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 64 m
- To
- 79 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:64-79
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (11.2 g/t) is below the weak threshold. Silver GT product (168.00 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“11.2”
Context: 15.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · goldGrade: 3.13Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 3.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 75 m
- To
- 76 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:75-76
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (3.13 g/t) is strong for epithermal deposits. Gold GT product (3.13 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“3.13”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · silverGrade: 27Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 27
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 75 m
- To
- 76 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:75-76
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (27.0 g/t) is below the weak threshold. Silver GT product (27.00 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“27.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · goldGrade: 0.39Grade Unit: g/tIntercept: 15.02 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 15.02 m
- From
- 122.5 m
- To
- 137.52 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:122.5-137.52
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.39 g/t) is weak but mineralized for epithermal deposits. Gold GT product (5.86 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.39”
Context: 15.02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · silverGrade: 7.8Grade Unit: g/tIntercept: 15.02 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 7.8
- Grade Unit
- g/t
- Intercept
- 15.02 m
- From
- 122.5 m
- To
- 137.52 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:122.5-137.52
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (7.8 g/t) is below the weak threshold. Silver GT product (117.16 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“7.8”
Context: 15.02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · goldGrade: 0.7Grade Unit: g/tIntercept: 1.02 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 1.02 m
- From
- 131.98 m
- To
- 133 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:131.98-133
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.70 g/t) is weak but mineralized for epithermal deposits. Gold GT product (0.71 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.70”
Context: 1.02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · silverGrade: 23Grade Unit: g/tIntercept: 1.02 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 23
- Grade Unit
- g/t
- Intercept
- 1.02 m
- From
- 131.98 m
- To
- 133 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:131.98-133
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (23.0 g/t) is below the weak threshold. Silver GT product (23.46 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“23.0”
Context: 1.02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · goldGrade: 0.72Grade Unit: g/tIntercept: 10.26 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 0.72
- Grade Unit
- g/t
- Intercept
- 10.26 m
- From
- 139.1 m
- To
- 149.36 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:139.1-149.36
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (0.72 g/t) is weak but mineralized for epithermal deposits. Gold GT product (7.39 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“0.72”
Context: 10.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · silverGrade: 18.7Grade Unit: g/tIntercept: 10.26 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 18.7
- Grade Unit
- g/t
- Intercept
- 10.26 m
- From
- 139.1 m
- To
- 149.36 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:139.1-149.36
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (18.7 g/t) is below the weak threshold. Silver GT product (191.86 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“18.7”
Context: 10.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · goldGrade: 1.18Grade Unit: g/tIntercept: 2.78 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 2.78 m
- From
- 142.66 m
- To
- 145.44 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:142.66-145.44
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Gold grade (1.18 g/t) is moderate for epithermal deposits. Gold GT product (3.28 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“1.18”
Context: 2.78
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
2XF-21-0015Two Times Fred · silverGrade: 40.4Grade Unit: g/tIntercept: 2.78 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2XF-21-0015
- Project
- Two Times Fred
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- KTRI
Geometry
- Grade
- 40.4
- Grade Unit
- g/t
- Intercept
- 2.78 m
- From
- 142.66 m
- To
- 145.44 m
- Intercept Depth
- 64 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2XF-21-0015:142.66-145.44
Location
- Location
- Saki
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
- QA/QC Methods
- standards
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2021-01-01T00:00:00.000Z
Dates
- Event date
- 2025-04-30T00:00:00.000Z
Reasoning: Silver grade (40.4 g/t) is weak but mineralized. Silver GT product (112.21 g/t·m) is low.
Negative factors
- True width not explicitly stated as a single value, only as a range (65-85% of downhole length).
Evidence · table
“40.4”
Context: 2.78
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols.
Evidence · text
“Data from all drilling programs quoted were subject to industry standard QA-QC protocols.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range (65-85% of downhole length).
Evidence · text
“Estimated true widths are between 65% and 85% of downhole lengths”
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.