# KTRI Reports on Drill Results from the Two Times Fred Property Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9 Original source: https://money.tmx.com/en/quote/KTRI/news/8426334482088568/ktri-reports-on-drill-results-from-the-two-times-fred-property Publisher: tmx Original announcement: 2025-04-30T11:30:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Kootenay Resources Inc. - Ticker: KTRI - Exchange: TSX - Region: British Columbia - Primary commodity: Gold - Secondary commodities: Silver - Document categories: Drill results - Extracted: 2026-09-18 07:16:25 UTC Narrative sentiment: 0.60 · Bullish ## Minestarters Atlas summary Kootenay Resources Inc. reported drill results from the Two Times Fred Property in British Columbia, highlighting a large epithermal vein system with multiple mineralized targets. The program included 35 of 41 diamond drill holes, with the best intercept to date in hole 2XF-22-0041, which returned 14.95 meters of 1.28 g/t gold and 14.6 g/t silver, including higher-grade sub-intervals. The company noted that the vein system is extensive and open in all directions, with assays subject to industry-standard QA/QC protocols. Reasoning: The drill results confirm a large, prospective epithermal gold-silver system with high-grade intercepts, indicating significant exploration potential. The disclosure of QA/QC and QP sign-off adds credibility, though the early-stage nature and estimated true widths warrant moderate confidence. - Positive factor: Identification of a large epithermal vein system \(3.5 km x 2 km\) with significant gold and silver mineralization. - Positive factor: Multiple mineralized targets \(Saki, Gold Hill, Shinju, Borrow Pit, Hidden Hand, Shochu\) identified and open in all directions. - Positive factor: Best drill result to date in hole 2XF-22-0041, indicating high-grade potential. - Positive factor: QA/QC protocols were followed, and a Qualified Person approved the technical information. - Negative factor: Drilling is still lightly spaced, requiring further work to confirm continuity. - Negative factor: True widths are estimated as a range \(65-85% of downhole length\) rather than explicitly stated for each intercept. Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 72 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 72. Some facts used in scoring do not have a stored record. ## Drill Results (72) ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-0) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 1.66 - Grade Unit: g/t - Intercept: 6.6 m - From: 8.5 m - To: 15.1 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:8.5-15.1 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(1.66 g/t\) is moderate for epithermal deposits. Gold GT product \(10.96 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 1.66 Context: 6.60 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-1) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 30.1 - Grade Unit: g/t - Intercept: 6.6 m - From: 8.5 m - To: 15.1 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:8.5-15.1 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(30.1 g/t\) is weak but mineralized. Silver GT product \(198.66 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 30.1 Context: 6.60 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-2) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 4.44 - Grade Unit: g/t - Intercept: 0.5 m - From: 10.3 m - To: 11.2 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:10.3-11.2 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(4.44 g/t\) is strong for epithermal deposits. Gold GT product \(2.22 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 4.44 Context: 0.50 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-3) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 51.8 - Grade Unit: g/t - Intercept: 0.5 m - From: 10.3 m - To: 11.2 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:10.3-11.2 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(51.8 g/t\) is weak but mineralized. Silver GT product \(25.90 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 51.8 Context: 0.50 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-4) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 4.19 - Grade Unit: g/t - Intercept: 0.8 m - From: 13.7 m - To: 14.5 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:13.7-14.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(4.19 g/t\) is strong for epithermal deposits. Gold GT product \(3.35 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 4.19 Context: 0.80 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-5) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 59.1 - Grade Unit: g/t - Intercept: 0.8 m - From: 13.7 m - To: 14.5 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:13.7-14.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(59.1 g/t\) is weak but mineralized. Silver GT product \(47.28 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 59.1 Context: 0.80 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-6) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.54 - Grade Unit: g/t - Intercept: 9 m - From: 27.1 m - To: 36.1 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:27.1-36.1 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.54 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(4.86 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.54 Context: 9.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-7) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-01 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 8.9 - Grade Unit: g/t - Intercept: 9 m - From: 27.1 m - To: 36.1 m - Intercept Depth: 8.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-01:27.1-36.1 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(8.9 g/t\) is below the weak threshold. Silver GT product \(80.10 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 8.9 Context: 9.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-8) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.83 - Grade Unit: g/t - Intercept: 15.5 m - From: 12 m - To: 27.5 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:12-27.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.83 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(12.87 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.83 Context: 15.50 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-9) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 14.8 - Grade Unit: g/t - Intercept: 15.5 m - From: 12 m - To: 27.5 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:12-27.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(14.8 g/t\) is below the weak threshold. Silver GT product \(229.40 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 14.8 Context: 15.50 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-10) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 2.1 - Grade Unit: g/t - Intercept: 2 m - From: 24.5 m - To: 26.5 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:24.5-26.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(2.10 g/t\) is strong for epithermal deposits. Gold GT product \(4.20 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 2.10 Context: 2.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-11) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 28.8 - Grade Unit: g/t - Intercept: 2 m - From: 24.5 m - To: 26.5 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:24.5-26.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(28.8 g/t\) is below the weak threshold. Silver GT product \(57.60 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 28.8 Context: 2.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-12) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.46 - Grade Unit: g/t - Intercept: 17.5 m - From: 45 m - To: 62.5 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:45-62.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.46 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(8.05 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.46 Context: 17.50 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-13) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 10.7 - Grade Unit: g/t - Intercept: 17.5 m - From: 45 m - To: 62.5 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:45-62.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(10.7 g/t\) is below the weak threshold. Silver GT product \(187.25 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 10.7 Context: 17.50 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-14) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 2.52 - Grade Unit: g/t - Intercept: 1 m - From: 47 m - To: 48 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:47-48 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(2.52 g/t\) is strong for epithermal deposits. Gold GT product \(2.52 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 2.52 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-15) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-02 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 58.4 - Grade Unit: g/t - Intercept: 1 m - From: 47 m - To: 48 m - Intercept Depth: 12 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-02:47-48 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(58.4 g/t\) is weak but mineralized. Silver GT product \(58.40 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 58.4 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-03 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-16) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-03 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.39 - Grade Unit: g/t - Intercept: 11.06 m - From: 2.44 m - To: 13.5 m - Intercept Depth: 2.44 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-03:2.44-13.5 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.39 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(4.31 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.39 Context: 11.06 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-03 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-17) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-03 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 8.3 - Grade Unit: g/t - Intercept: 11.06 m - From: 2.44 m - To: 13.5 m - Intercept Depth: 2.44 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-03:2.44-13.5 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(8.3 g/t\) is below the weak threshold. Silver GT product \(91.79 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 8.3 Context: 11.06 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-03 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-18) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-03 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.4 - Grade Unit: g/t - Intercept: 14.14 m - From: 30.5 m - To: 44.64 m - Intercept Depth: 2.44 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-03:30.5-44.64 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.40 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(5.66 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.40 Context: 14.14 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-03 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-19) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-03 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 8.2 - Grade Unit: g/t - Intercept: 14.14 m - From: 30.5 m - To: 44.64 m - Intercept Depth: 2.44 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-03:30.5-44.64 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(8.2 g/t\) is below the weak threshold. Silver GT product \(115.95 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 8.2 Context: 14.14 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-04 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-20) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-04 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.29 - Grade Unit: g/t - Intercept: 24.4 m - From: 36.6 m - To: 61 m - Intercept Depth: 36.6 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-04:36.6-61 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.29 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(7.09 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.29 Context: 24.40 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-04 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-21) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-04 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 7.7 - Grade Unit: g/t - Intercept: 24.4 m - From: 36.6 m - To: 61 m - Intercept Depth: 36.6 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-04:36.6-61 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(7.7 g/t\) is below the weak threshold. Silver GT product \(187.88 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 7.7 Context: 24.40 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated #### Rejected tags **QA/QC Disclosed** — Rejected; excluded from scoring Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Reason: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject =to industry standard QA-QC protocols. ### 2XF-15-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-22) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.28 - Grade Unit: g/t - Intercept: 47.05 m - From: 4.1 m - To: 51.15 m - Intercept Depth: 4.1 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-05:4.1-51.15 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.28 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(13.17 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.28 Context: 47.05 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-23) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 4 - Grade Unit: g/t - Intercept: 47.05 m - From: 4.1 m - To: 51.15 m - Intercept Depth: 4.1 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-05:4.1-51.15 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(4.0 g/t\) is below the weak threshold. Silver GT product \(188.20 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 4.0 Context: 47.05 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-24) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 2.39 - Grade Unit: g/t - Intercept: 0.83 m - From: 7.1 m - To: 7.93 m - Intercept Depth: 4.1 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-05:7.1-7.93 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(2.39 g/t\) is strong for epithermal deposits. Gold GT product \(1.98 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 2.39 Context: 0.83 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-25) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 8.2 - Grade Unit: g/t - Intercept: 0.83 m - From: 7.1 m - To: 7.93 m - Intercept Depth: 4.1 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-05:7.1-7.93 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(8.2 g/t\) is below the weak threshold. Silver GT product \(6.81 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 8.2 Context: 0.83 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-07 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-26) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-07 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.43 - Grade Unit: g/t - Intercept: 1.7 m - From: 33.7 m - To: 35.4 m - Intercept Depth: 33.7 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-07:33.7-35.4 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.43 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(0.73 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.43 Context: 1.70 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-07 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-27) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-07 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 19.9 - Grade Unit: g/t - Intercept: 1.7 m - From: 33.7 m - To: 35.4 m - Intercept Depth: 33.7 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-07:33.7-35.4 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(19.9 g/t\) is below the weak threshold. Silver GT product \(33.83 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 19.9 Context: 1.70 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-28) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.15 - Grade Unit: g/t - Intercept: 62.25 m - From: 22.45 m - To: 84.7 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:22.45-84.7 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.15 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(9.34 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.15 Context: 62.25 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-29) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 7.8 - Grade Unit: g/t - Intercept: 62.25 m - From: 22.45 m - To: 84.7 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:22.45-84.7 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(7.8 g/t\) is below the weak threshold. Silver GT product \(485.55 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 7.8 Context: 62.25 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-30) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.21 - Grade Unit: g/t - Intercept: 23.95 m - From: 56.25 m - To: 80.2 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:56.25-80.2 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.21 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(5.03 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.21 Context: 23.95 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-31) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 16.4 - Grade Unit: g/t - Intercept: 23.95 m - From: 56.25 m - To: 80.2 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:56.25-80.2 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(16.4 g/t\) is below the weak threshold. Silver GT product \(392.78 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 16.4 Context: 23.95 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-32) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.32 - Grade Unit: g/t - Intercept: 5.9 m - From: 68.1 m - To: 74 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:68.1-74 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.32 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(1.89 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.32 Context: 5.90 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-33) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 35 - Grade Unit: g/t - Intercept: 5.9 m - From: 68.1 m - To: 74 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:68.1-74 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(35.0 g/t\) is weak but mineralized. Silver GT product \(206.50 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 35.0 Context: 5.90 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-34) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.63 - Grade Unit: g/t - Intercept: 1.1 m - From: 69.5 m - To: 70.6 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:69.5-70.6 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.63 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(0.69 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.63 Context: 1.10 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-15-08 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-35) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-15-08 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 67.9 - Grade Unit: g/t - Intercept: 1.1 m - From: 69.5 m - To: 70.6 m - Intercept Depth: 22.45 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-15-08:69.5-70.6 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2015-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(67.9 g/t\) is weak but mineralized. Silver GT product \(74.69 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 67.9 Context: 1.10 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-36) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-01 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.37 - Grade Unit: g/t - Intercept: 10 m - From: 101.4 m - To: 111.4 m - Intercept Depth: 101.4 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-01:101.4-111.4 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.37 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(3.70 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.37 Context: 10.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-37) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-01 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 5.7 - Grade Unit: g/t - Intercept: 10 m - From: 101.4 m - To: 111.4 m - Intercept Depth: 101.4 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-01:101.4-111.4 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(5.7 g/t\) is below the weak threshold. Silver GT product \(57.00 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 5.7 Context: 10.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-38) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-01 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.9 - Grade Unit: g/t - Intercept: 1 m - From: 109.4 m - To: 110.4 m - Intercept Depth: 101.4 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-01:109.4-110.4 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.90 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(0.90 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.90 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-01 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-39) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-01 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 11.5 - Grade Unit: g/t - Intercept: 1 m - From: 109.4 m - To: 110.4 m - Intercept Depth: 101.4 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-01:109.4-110.4 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(11.5 g/t\) is below the weak threshold. Silver GT product \(11.50 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 11.5 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-40) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-02 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.9 - Grade Unit: g/t - Intercept: 2 m - From: 163.5 m - To: 165.5 m - Intercept Depth: 163.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-02:163.5-165.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.90 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(1.80 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.90 Context: 2.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-02 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-41) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-02 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 11.5 - Grade Unit: g/t - Intercept: 2 m - From: 163.5 m - To: 165.5 m - Intercept Depth: 163.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-02:163.5-165.5 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(11.5 g/t\) is below the weak threshold. Silver GT product \(23.00 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 11.5 Context: 2.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-03 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-42) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-03 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.21 - Grade Unit: g/t - Intercept: 9 m - From: 178.5 m - To: 187.5 m - Intercept Depth: 178.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-03:178.5-187.5 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.21 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(1.89 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.21 Context: 9.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-03 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-43) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-03 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 3.2 - Grade Unit: g/t - Intercept: 9 m - From: 178.5 m - To: 187.5 m - Intercept Depth: 178.5 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-03:178.5-187.5 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(3.2 g/t\) is below the weak threshold. Silver GT product \(28.80 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 3.2 Context: 9.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-04 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-44) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-04 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.45 - Grade Unit: g/t - Intercept: 6 m - From: 197 m - To: 203 m - Intercept Depth: 197 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-04:197-203 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.45 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(2.70 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.45 Context: 6.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-04 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-45) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-04 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 2 - Grade Unit: g/t - Intercept: 6 m - From: 197 m - To: 203 m - Intercept Depth: 197 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-04:197-203 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(2.0 g/t\) is below the weak threshold. Silver GT product \(12.00 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 2.0 Context: 6.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-46) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.9 - Grade Unit: g/t - Intercept: 1 m - From: 9 m - To: 10 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:9-10 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.90 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(0.90 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.90 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-47) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 31.7 - Grade Unit: g/t - Intercept: 1 m - From: 9 m - To: 10 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:9-10 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(31.7 g/t\) is weak but mineralized. Silver GT product \(31.70 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 31.7 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-48) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.5 - Grade Unit: g/t - Intercept: 18 m - From: 18 m - To: 36 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:18-36 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.50 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(9.00 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.50 Context: 18.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-49) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 19.3 - Grade Unit: g/t - Intercept: 18 m - From: 18 m - To: 36 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:18-36 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(19.3 g/t\) is below the weak threshold. Silver GT product \(347.40 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 19.3 Context: 18.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-50) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 1.48 - Grade Unit: g/t - Intercept: 1 m - From: 34 m - To: 35 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:34-35 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(1.48 g/t\) is moderate for epithermal deposits. Gold GT product \(1.48 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 1.48 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-51) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 5.4 - Grade Unit: g/t - Intercept: 1 m - From: 34 m - To: 35 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:34-35 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(5.4 g/t\) is below the weak threshold. Silver GT product \(5.40 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 5.4 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-52) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.39 - Grade Unit: g/t - Intercept: 43 m - From: 43 m - To: 86 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:43-86 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.39 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(16.77 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.39 Context: 43.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-53) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 6.6 - Grade Unit: g/t - Intercept: 43 m - From: 43 m - To: 86 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:43-86 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(6.6 g/t\) is below the weak threshold. Silver GT product \(283.80 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 6.6 Context: 43.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-54) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.71 - Grade Unit: g/t - Intercept: 3 m - From: 48 m - To: 51 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:48-51 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.71 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(2.13 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.71 Context: 3.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-55) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 6.4 - Grade Unit: g/t - Intercept: 3 m - From: 48 m - To: 51 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:48-51 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(6.4 g/t\) is below the weak threshold. Silver GT product \(19.20 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 6.4 Context: 3.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-56) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.92 - Grade Unit: g/t - Intercept: 2 m - From: 67 m - To: 69 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:67-69 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.92 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(1.84 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.92 Context: 2.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-19-05 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-57) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-19-05 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 6.9 - Grade Unit: g/t - Intercept: 2 m - From: 67 m - To: 69 m - Intercept Depth: 9 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-19-05:67-69 #### Location - Location: Gold Hill - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2019-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(6.9 g/t\) is below the weak threshold. Silver GT product \(13.80 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 6.9 Context: 2.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0014 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-58) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0014 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.24 - Grade Unit: g/t - Intercept: 0.37 m - From: 158.13 m - To: 158.5 m - Intercept Depth: 158.13 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0014:158.13-158.5 #### Location - Location: Exploration - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.24 g/t\) is below the weak threshold for epithermal deposits. Gold GT product \(0.09 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.24 Context: 0.37 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0014 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-59) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0014 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 8.4 - Grade Unit: g/t - Intercept: 0.37 m - From: 158.13 m - To: 158.5 m - Intercept Depth: 158.13 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0014:158.13-158.5 #### Location - Location: Exploration - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(8.4 g/t\) is below the weak threshold. Silver GT product \(3.11 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 8.4 Context: 0.37 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-60) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.76 - Grade Unit: g/t - Intercept: 15 m - From: 64 m - To: 79 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:64-79 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.76 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(11.40 g/t·m\) is weak. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.76 Context: 15.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-61) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 11.2 - Grade Unit: g/t - Intercept: 15 m - From: 64 m - To: 79 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:64-79 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(11.2 g/t\) is below the weak threshold. Silver GT product \(168.00 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 11.2 Context: 15.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-62) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 3.13 - Grade Unit: g/t - Intercept: 1 m - From: 75 m - To: 76 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:75-76 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(3.13 g/t\) is strong for epithermal deposits. Gold GT product \(3.13 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 3.13 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-63) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 27 - Grade Unit: g/t - Intercept: 1 m - From: 75 m - To: 76 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:75-76 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(27.0 g/t\) is below the weak threshold. Silver GT product \(27.00 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 27.0 Context: 1.00 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-64) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.39 - Grade Unit: g/t - Intercept: 15.02 m - From: 122.5 m - To: 137.52 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:122.5-137.52 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.39 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(5.86 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.39 Context: 15.02 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-65) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 7.8 - Grade Unit: g/t - Intercept: 15.02 m - From: 122.5 m - To: 137.52 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:122.5-137.52 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(7.8 g/t\) is below the weak threshold. Silver GT product \(117.16 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 7.8 Context: 15.02 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-66) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.7 - Grade Unit: g/t - Intercept: 1.02 m - From: 131.98 m - To: 133 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:131.98-133 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.70 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(0.71 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.70 Context: 1.02 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-67) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 23 - Grade Unit: g/t - Intercept: 1.02 m - From: 131.98 m - To: 133 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:131.98-133 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(23.0 g/t\) is below the weak threshold. Silver GT product \(23.46 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 23.0 Context: 1.02 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-68) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 0.72 - Grade Unit: g/t - Intercept: 10.26 m - From: 139.1 m - To: 149.36 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:139.1-149.36 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(0.72 g/t\) is weak but mineralized for epithermal deposits. Gold GT product \(7.39 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 0.72 Context: 10.26 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-69) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 18.7 - Grade Unit: g/t - Intercept: 10.26 m - From: 139.1 m - To: 149.36 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:139.1-149.36 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(18.7 g/t\) is below the weak threshold. Silver GT product \(191.86 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 18.7 Context: 10.26 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-70) Two Times Fred · gold Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: gold - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 1.18 - Grade Unit: g/t - Intercept: 2.78 m - From: 142.66 m - To: 145.44 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:142.66-145.44 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Gold grade \(1.18 g/t\) is moderate for epithermal deposits. Gold GT product \(3.28 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 1.18 Context: 2.78 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 2XF-21-0015 [Link to this fact](https://atlas-extractions.minestarters.com/news/ktri-reports-on-drill-results-from-the-two-times-fred-property--a5ed6277-803c-4daa-a324-21d4aa378da9#fact-drill-facts-71) Two Times Fred · silver Historical result Needs review: historical\_restatement #### Identity - Hole ID: 2XF-21-0015 - Project: Two Times Fred - Commodity: silver - Region: canada\_bc - Reported Region: canada\_bc - Ticker: KTRI #### Geometry - Grade: 40.4 - Grade Unit: g/t - Intercept: 2.78 m - From: 142.66 m - To: 145.44 m - Intercept Depth: 64 m #### Classification - Deposit Type: epithermal - Program: exploration - Sample Type: drill - Group ID: 2XF-21-0015:142.66-145.44 #### Location - Location: Saki - Loc. Source: document #### QA/QC - QP Signed: Yes - QA/QC Methods: standards #### Review - Needs Review: Yes - Review Reason: historical\_restatement - Interp. Status: scored - Historical: Yes - Historical Source Date: 2021-01-01T00:00:00.000Z #### Dates - Event date: 2025-04-30T00:00:00.000Z Reasoning: Silver grade \(40.4 g/t\) is weak but mineralized. Silver GT product \(112.21 g/t·m\) is low. - Negative factor: True width not explicitly stated as a single value, only as a range \(65-85% of downhole length\). Evidence · table > 40.4 Context: 2.78 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Data from all drilling programs quoted were subject to industry standard QA-QC protocols. Evidence · text > Data from all drilling programs quoted were subject to industry standard QA-QC protocols. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width explicitly stated, only an estimated range \(65-85% of downhole length\). Evidence · text > Estimated true widths are between 65% and 85% of downhole lengths **No QA/QC Disclosure** Polarity: negative Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document. Why it applies: qaqc\_disclosed is not true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.