LAURION Intersects High-Grade Gold and Polymetallic Mineralization in Drill Holes LBX25-101 and LBX25-102 at Ishkoday A-Zone Corridor
Original announcement by tmx on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME
- Exchange
- TSX
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper, Zinc
- Document categories
- Drill results, Other
- Extracted
- 2026-09-12 11:08:44 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration Inc. announced high-grade gold and polymetallic drill results from holes LBX25-101 and LBX25-102 at its Ishkoday A-Zone Corridor in Ontario. Key intercepts include 0.50 m at 2.06 g/t Au, 31.10 g/t Ag, 0.53% Cu, and 12.35% Zn, and 0.50 m at 3.89 g/t Au, 38.70 g/t Ag, 0.42% Cu, and 5.37% Zn. These results extend drill coverage into a sparsely tested area and strengthen continuity of mineralization, with all QA/QC protocols verified.
Reasoning: LAURION's new drill results from the Ishkoday A-Zone Corridor confirm high-grade gold and polymetallic mineralization, with several significant intercepts, and extend drill coverage into a previously sparsely drilled area. The company has provided robust QA/QC disclosure, but true widths are not yet known.
Positive factors
- High-grade polymetallic intercepts
- Step-out drilling extending mineralization
- Comprehensive QA/QC disclosure
- QP/CP sign-off
Negative factors
- True width not disclosed for intercepts
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 78
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release states that LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, and that ALS Global Geochemistry and ALS Global Analytical Lab were used for analysis.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory. After logging, core samples were identified and then cut in half along core axis in the same building and then zip tied individually in plastic sample bags with a bar code. Approximately five or six of these individual bags were then stacked into a “rice” white material bag and stored on a skid for final shipment to the laboratory. All core samples were shipped to the ALS facility in Thunder Bay, Ontario, which were then prepared by ALS Global Geochemistry in Thunder Bay and analyzed by ALS Global Analytical Lab in North Vancouver, British Columbia. Samples are processed by 4-acid digestion and analyzed by fire assay on 50 g pulps and ICP-AES (Inductively Coupled Plasma – Atomic Emission Spectroscopy). Over limit analyses are reprocessed with gravimetric finish. A total of 5% blanks and 5% standard are inserted randomly within all samples. 5% of the best assay result pulps were sent for re-assays. All QA/QC were verified, and no contamination or bias have been observed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'The true widths of the mineralized zones are not known at this time as there is insufficient information to determine the orientation of the mineralization.'
Evidence · text
“NOTE: Intervals represent core length. The interval widths reported are down-hole widths. The true widths of the mineralized zones are not known at this time as there is insufficient information to determine the orientation of the mineralization.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill hole LBX25-101 was established as a step-back collar to test projected mineralized horizons and structural continuity beyond the denser drill grid, and LBX25-102 extends drill coverage into a sparsely drilled area.
Evidence · text
“LBX25-101 was established as a step-back collar to test projected mineralized horizons and structural continuity beyond the denser drill grid. ... LBX25-102 was collared adjacent to the access road approximately 1.0 km south of the River Road, located north of the McLeod Zone and southwest of drill hole LBX21-041, to support continued drill coverage along this portion of the interpreted mineralized trend. This collar location enabled efficient drill access while extending geological coverage into a less densely tested portion of the corridor.”
Extracted facts
Stored fact records: 78. Some facts used in scoring do not have a stored record.
Drill Results (78)
LBX25-101Ishkōday · goldGrade: 0.2Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-11.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.200”
Context: 3.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 2.88Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.88
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-11.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“2.88”
Context: 3.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.03Grade Unit: %Intercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-11.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.03”
Context: 3.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 0.65Grade Unit: %Intercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.65
- Grade Unit
- %
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-11.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.65”
Context: 3.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 0.146Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.146
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-8.6
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.146”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 9.8Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 9.8
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-8.6
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“9.80”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.06Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-8.6
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.06”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 2.94Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.94
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.9-8.6
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“2.94”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 0.224Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.224
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.224”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 4.8Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.8
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“4.80”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.12Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.12”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 1.54Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.54
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.8
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“1.54”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 0.209Grade Unit: g/tIntercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.209
- Grade Unit
- g/t
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-196.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.209”
Context: 37.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 2.06Grade Unit: g/tIntercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-196.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“2.06”
Context: 37.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.05Grade Unit: %Intercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-196.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.05”
Context: 37.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 0.87Grade Unit: %Intercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-196.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.87”
Context: 37.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 0.883Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.883
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-160.7
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.883”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 13.6Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-160.7
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade silver mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“13.60”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.24Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-160.7
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade copper mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.24”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 5.61Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.61
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.2-160.7
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade zinc mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.61”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 2.06Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.7-160.2
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade gold mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade gold intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.060”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 31.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 31.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.7-160.2
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade silver mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade silver intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“31.10”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.53Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.7-160.2
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade copper mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade copper intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.53”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 12.35Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 12.35
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.7-160.2
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade zinc mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade zinc intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“12.35”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 1.159Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.159
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.7-189.3
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“1.159”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 10.21Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 10.21
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.7-189.3
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade silver mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“10.21”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.3Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.7-189.3
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade copper mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.30”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 4.39Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.39
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.7-189.3
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade zinc mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“4.39”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 0.872Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.872
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.2-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.872”
Context: 5.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 5.11Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.11
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.2-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade silver mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.11”
Context: 5.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.16Grade Unit: %Intercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.2-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade copper mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.16”
Context: 5.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 2.53Grade Unit: %Intercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.53
- Grade Unit
- %
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.2-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade zinc mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.53”
Context: 5.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · goldGrade: 0.971Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.971
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.5-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.971”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · silverGrade: 4.04Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.04
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.5-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade silver mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“4.04”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · copperGrade: 0.14Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.5-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade copper mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.14”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-101Ishkōday · zincGrade: 2.21Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.21
- Grade Unit
- %
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
- Intercept Depth
- 7.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.5-193.5
- Mining Method
- unknown
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade zinc mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.21”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 3.89Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.89
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45-45.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade gold mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade gold intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“3.890”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 38.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 38.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45-45.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade silver mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade silver intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“38.70”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.42Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45-45.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade copper mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade copper intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.42”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 5.37Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.37
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45-45.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade zinc mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade zinc intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.37”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 0.617Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.617
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.8-53.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.617”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 3.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.8-53.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“3.90”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.8-53.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.03”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 3.25Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.25
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.8-53.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“3.25”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 0.511Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.511
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.9-83.7
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.511”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 0.5Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.9-83.7
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“0.50”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.9-83.7
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.01”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 2.04Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.04
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.5-109.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade gold mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade gold intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.040”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 0.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.5-109.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“0.80”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.5-109.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.01”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.5-109.5
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.02”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 2.63Grade Unit: g/tIntercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.63
- Grade Unit
- g/t
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade gold mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade gold intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.630”
Context: 2.04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 2.38Grade Unit: g/tIntercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.38
- Grade Unit
- g/t
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“2.38”
Context: 2.04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.02Grade Unit: %Intercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.02”
Context: 2.04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 0.17Grade Unit: %Intercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.17”
Context: 2.04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 5.14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.14
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows bonanza-grade gold mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- Bonanza Intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“5.140”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 4.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“4.60”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.04”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 0.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207-208
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 0.339Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.339
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212-213
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.339”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 0.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212-213
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“0.25”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212-213
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.04”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 0.457Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.457
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.8-223.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.457”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 20.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 20.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.8-223.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade silver mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade silver intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“20.60”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.8-223.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.03”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 2.55Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.55
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.8-223.3
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“2.55”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 0.355Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.355
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226-245
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low gold grade
- Apparent width only
Evidence · table
“0.355”
Context: 19.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 2.63Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.63
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226-245
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade silver mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low silver grade
- Apparent width only
Evidence · table
“2.63”
Context: 19.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.03Grade Unit: %Intercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226-245
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade copper mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low copper grade
- Apparent width only
Evidence · table
“0.03”
Context: 19.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 0.58Grade Unit: %Intercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226-245
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows low-grade zinc mineralization over a significant width, but is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Low zinc grade
- Apparent width only
Evidence · table
“0.58”
Context: 19.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 1.114Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.114
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-233.6
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“1.114”
Context: 3.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 6.35Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 6.35
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-233.6
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade silver mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“6.35”
Context: 3.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.07Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-233.6
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade copper mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.07”
Context: 3.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 1.78Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.78
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-233.6
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows moderate-grade zinc mineralization, and is a new result with good QA/QC.
Positive factors
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“1.78”
Context: 3.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · goldGrade: 2.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-230.8
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade gold mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade gold intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“2.600”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · silverGrade: 13.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-230.8
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade silver mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade silver intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“13.60”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · copperGrade: 0.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-230.8
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade copper mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade copper intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“0.10”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX25-102Ishkōday · zincGrade: 6.75Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 6.75
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.3-230.8
- Mining Method
- unknown
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: This intercept shows high-grade zinc mineralization over a narrow width, and is a new result with good QA/QC.
Positive factors
- High-grade zinc intercept
- New drill intercept
- Good QA/QC disclosure
Negative factors
- Apparent width only
Evidence · table
“6.75”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.