LAURION Intersects High-Grade Gold, Silver and Zinc at Ishkoday A-Zone/McLeod/CRK Zone, Confirming Structural Continuity Along Mineralized Corridor
Original announcement by tmx on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME
- Exchange
- TSX
- Region
- north-western Ontario
- Primary commodity
- Gold
- Secondary commodities
- Silver, Zinc, Copper
- Document categories
- Drill results
- Extracted
- 2026-09-12 11:22:18 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration Inc. announced high-grade gold, silver, and zinc assay results from its recent diamond drilling at the Ishkōday Project in north-western Ontario. The drilling, focusing on the A-Zone/McLeod/CRK Zone, confirmed structural continuity along a mineralized corridor, with notable intercepts including 0.55 m at 12.15 g/t Au, 16.1 g/t Ag, and 2.66% Zn, and 0.70 m at 5.97 g/t Au, 18.4 g/t Ag, and 10.8% Zn. These new results reinforce the company's understanding of the gold-zinc system and its potential for further expansion.
Reasoning: The drill program at the Ishkōday Project successfully intersected high-grade gold and zinc, confirming the structural continuity of the mineralized corridor. The results are supported by robust QA/QC, although the lack of true width and a contradictory disclaimer are minor concerns.
Positive factors
- High-grade gold intercepts, including 12.15 g/t Au over 0.55 m, exceed the strong threshold for orogenic gold deposits.
- High-grade zinc intercepts, including 10.8% Zn over 0.70 m, exceed the strong threshold for zinc deposits.
- Drilling confirms structural continuity along a mineralized corridor, extending known mineralization.
- Comprehensive QA/QC protocols are disclosed, including certified lab analysis and QP sign-off, enhancing data reliability.
- New assay results from recent diamond drilling provide fresh insights into the project's potential.
Negative factors
- True width of intercepts is not disclosed, meaning reported lengths are apparent downhole widths.
- Compositing parameters (cut-off grade, internal dilution) for reported intervals are not explicitly stated.
- A contradictory disclaimer at the end of the release states that all sample values are from grab/channel samples, which directly conflicts with the detailed drill core reporting, raising concerns about document quality control.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 86
Extracted facts
Stored fact records: 86. Some facts used in scoring do not have a stored record.
Drill Results (86)
LBX25-095Ishkōday · goldGrade: 1.84Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.84
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 27.4 m
- To
- 30 m
- Hole Depth
- 201 m
- Intercept Depth
- 27.4 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LBX25-095:27.4-30
- Mining Method
- underground
Location
- Easting
- 446115.3
- Northing
- 5512416
- Elevation
- 332.5 m
- Azimuth
- 124 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: This intercept represents a new assay result, but the gold grade is relatively low for an orogenic deposit.
Positive factors
- New assay result from recent drilling.
Negative factors
- Gold grade is below the weak threshold for orogenic gold deposits.
Evidence · table
“1.84”
Context: 2.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 0.45Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 27.4 m
- To
- 30 m
- Hole Depth
- 201 m
- Intercept Depth
- 27.4 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LBX25-095:27.4-30
- Mining Method
- underground
Location
- Easting
- 446115.3
- Northing
- 5512416
- Elevation
- 332.5 m
- Azimuth
- 124 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: This intercept represents a new assay result, but the silver grade is very low.
Positive factors
- New assay result from recent drilling.
Evidence · table
“0.45”
Context: 2.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.02Grade Unit: %Intercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.6 m
- From
- 27.4 m
- To
- 30 m
- Hole Depth
- 201 m
- Intercept Depth
- 27.4 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LBX25-095:27.4-30
- Mining Method
- underground
Location
- Easting
- 446115.3
- Northing
- 5512416
- Elevation
- 332.5 m
- Azimuth
- 124 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: This intercept represents a new assay result, but the zinc grade is very low.
Positive factors
- New assay result from recent drilling.
Evidence · table
“0.02”
Context: 2.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 7.25Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 7.25
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 27.9 m
- To
- 28.5 m
- Intercept Depth
- 27.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:27.9-28.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 7.25 g/t gold is strong against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 4.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 7.25 g/t gold is strong on the underground mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.25”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 1.1Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 27.9 m
- To
- 28.5 m
- Intercept Depth
- 27.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:27.9-28.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 1.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.10”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 1.02Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 45.3 m
- To
- 46.3 m
- Intercept Depth
- 45.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:45.3-46.3
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.02 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 1.02 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.02”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 0.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 45.3 m
- To
- 46.3 m
- Intercept Depth
- 45.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:45.3-46.3
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.25 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.15Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 1 m
- From
- 45.3 m
- To
- 46.3 m
- Intercept Depth
- 45.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:45.3-46.3
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.15 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.11Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 91.25 m
- To
- 95.25 m
- Intercept Depth
- 91.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:91.25-95.25
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.11 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 0.25Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 91.25 m
- To
- 95.25 m
- Intercept Depth
- 91.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:91.25-95.25
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 0.25 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 91.25 m
- To
- 95.25 m
- Intercept Depth
- 91.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:91.25-95.25
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.27Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 132.1 m
- To
- 132.6 m
- Intercept Depth
- 132.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:132.1-132.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.27 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 1.4Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 132.1 m
- To
- 132.6 m
- Intercept Depth
- 132.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:132.1-132.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 1.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.40”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 1.27Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.27
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 132.1 m
- To
- 132.6 m
- Intercept Depth
- 132.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:132.1-132.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.27 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 1.27 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.27”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.53Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 135.2 m
- To
- 135.7 m
- Intercept Depth
- 135.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:135.2-135.7
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.53 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 6.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 6.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 135.2 m
- To
- 135.7 m
- Intercept Depth
- 135.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:135.2-135.7
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 6.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.0 g/t·m is below.
Negative factors
- 6.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.10”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.24Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 135.2 m
- To
- 135.7 m
- Intercept Depth
- 135.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:135.2-135.7
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.24 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.13Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 141 m
- To
- 141.6 m
- Intercept Depth
- 141 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:141-141.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 141 m
- To
- 141.6 m
- Intercept Depth
- 141 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:141-141.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.00”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.13Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 141 m
- To
- 141.6 m
- Intercept Depth
- 141 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:141-141.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.12Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 143.8 m
- To
- 147.8 m
- Intercept Depth
- 143.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:143.8-147.8
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.12 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 1.71Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.71
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 143.8 m
- To
- 147.8 m
- Intercept Depth
- 143.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:143.8-147.8
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.71 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.8 g/t·m is below.
Negative factors
- 1.71 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.71”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.17Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 4 m
- From
- 143.8 m
- To
- 147.8 m
- Intercept Depth
- 143.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:143.8-147.8
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.17 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.14Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 145 m
- To
- 147.8 m
- Intercept Depth
- 145 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:145-147.8
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.14 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 2.16Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.16
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 145 m
- To
- 147.8 m
- Intercept Depth
- 145 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:145-147.8
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.16 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.0 g/t·m is below.
Negative factors
- 2.16 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.16”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.21Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 145 m
- To
- 147.8 m
- Intercept Depth
- 145 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:145-147.8
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.21 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 1.4Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 162.5 m
- To
- 166 m
- Intercept Depth
- 162.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:162.5-166
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.4 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 4.9 g/t·m is below.
Negative factors
- 1.4 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.40”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 4.27Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.27
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 162.5 m
- To
- 166 m
- Intercept Depth
- 162.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:162.5-166
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 4.27 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.9 g/t·m is below.
Negative factors
- 4.27 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.27”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 2.3Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.3
- Grade Unit
- %
- Intercept
- 3.5 m
- From
- 162.5 m
- To
- 166 m
- Intercept Depth
- 162.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:162.5-166
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.3 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 8.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.30”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 5.97Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.97
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 163.05 m
- To
- 163.75 m
- Intercept Depth
- 163.05 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:163.05-163.75
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 5.97 g/t gold is moderate against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 4.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.97”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 18.4Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 18.4
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 163.05 m
- To
- 163.75 m
- Intercept Depth
- 163.05 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:163.05-163.75
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 18.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 12.9 g/t·m is below.
Negative factors
- 18.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.40”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 10.8Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 10.8
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 163.05 m
- To
- 163.75 m
- Intercept Depth
- 163.05 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:163.05-163.75
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 10.8 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 7.6 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 10.8 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.80”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 0.21Grade Unit: g/tIntercept: 2.15 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 2.15 m
- From
- 167.2 m
- To
- 169.35 m
- Intercept Depth
- 167.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:167.2-169.35
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 1.36Grade Unit: g/tIntercept: 2.15 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.36
- Grade Unit
- g/t
- Intercept
- 2.15 m
- From
- 167.2 m
- To
- 169.35 m
- Intercept Depth
- 167.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:167.2-169.35
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.36 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.9 g/t·m is below.
Negative factors
- 1.36 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.36”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.18Grade Unit: %Intercept: 2.15 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 2.15 m
- From
- 167.2 m
- To
- 169.35 m
- Intercept Depth
- 167.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:167.2-169.35
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.18 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 2Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 188 m
- To
- 192.5 m
- Intercept Depth
- 188 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:188-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 9.0 g/t·m is below.
Negative factors
- 2 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.00”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 5.75Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.75
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 188 m
- To
- 192.5 m
- Intercept Depth
- 188 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:188-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 5.75 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 25.9 g/t·m is below.
Negative factors
- 5.75 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.75”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 1.22Grade Unit: %Intercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.22
- Grade Unit
- %
- Intercept
- 4.5 m
- From
- 188 m
- To
- 192.5 m
- Intercept Depth
- 188 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:188-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.22 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.5 %·m is below.
Negative factors
- 1.22 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.22”
Context: LBX25-095
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 3.3Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 188 m
- To
- 188.5 m
- Intercept Depth
- 188 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:188-188.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 3.3 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.30”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 17.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 17.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 188 m
- To
- 188.5 m
- Intercept Depth
- 188 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:188-188.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 17.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.9 g/t·m is below.
Negative factors
- 17.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“17.80”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 6.84Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 6.84
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 188 m
- To
- 188.5 m
- Intercept Depth
- 188 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:188-188.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 6.84 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 3.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.84”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 3Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 190.1 m
- To
- 192.5 m
- Intercept Depth
- 190.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:190.1-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 3 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 7.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.00”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 4.8Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.8
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 190.1 m
- To
- 192.5 m
- Intercept Depth
- 190.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:190.1-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 4.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 11.5 g/t·m is below.
Negative factors
- 4.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.80”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 0.78Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 190.1 m
- To
- 192.5 m
- Intercept Depth
- 190.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:190.1-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.78 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.78 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.78”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · goldGrade: 12.15Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 12.15
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 191.1 m
- To
- 192.5 m
- Intercept Depth
- 191.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:191.1-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 12.15 g/t gold is strong against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 6.7 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 12.15 g/t gold is strong on the underground mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.15”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · silverGrade: 16.1Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 16.1
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 191.1 m
- To
- 192.5 m
- Intercept Depth
- 191.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:191.1-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 16.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.9 g/t·m is below.
Negative factors
- 16.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.10”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-095Ishkōday · zincGrade: 2.66Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX25-095
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.66
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 191.1 m
- To
- 192.5 m
- Intercept Depth
- 191.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-095:191.1-192.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.66 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.66”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 2.14Grade Unit: g/tIntercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.14
- Grade Unit
- g/t
- Intercept
- 1.15 m
- From
- 8.35 m
- To
- 9.5 m
- Intercept Depth
- 8.35 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:8.35-9.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.14 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.5 g/t·m is below.
Negative factors
- 2.14 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.14”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 5.18Grade Unit: g/tIntercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.18
- Grade Unit
- g/t
- Intercept
- 1.15 m
- From
- 8.35 m
- To
- 9.5 m
- Intercept Depth
- 8.35 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:8.35-9.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 5.18 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.0 g/t·m is below.
Negative factors
- 5.18 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.18”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.61Grade Unit: %Intercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.61
- Grade Unit
- %
- Intercept
- 1.15 m
- From
- 8.35 m
- To
- 9.5 m
- Intercept Depth
- 8.35 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:8.35-9.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.61 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.61 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.61”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 4.76Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.76
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 9 m
- To
- 9.5 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:9-9.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 4.76 g/t gold is moderate against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.76”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 8.4Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 8.4
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 9 m
- To
- 9.5 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:9-9.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 8.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.2 g/t·m is below.
Negative factors
- 8.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.40”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 1.35Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.35
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 9 m
- To
- 9.5 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:9-9.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.35 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 1.35 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.35”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 0.52Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 10.9 m
- To
- 11.4 m
- Intercept Depth
- 10.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:10.9-11.4
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.52 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.52 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.52”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 0.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 10.9 m
- To
- 11.4 m
- Intercept Depth
- 10.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:10.9-11.4
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.02Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 10.9 m
- To
- 11.4 m
- Intercept Depth
- 10.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:10.9-11.4
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 0.31Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 35.75 m
- To
- 36.25 m
- Intercept Depth
- 35.75 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:35.75-36.25
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.31 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 1.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 35.75 m
- To
- 36.25 m
- Intercept Depth
- 35.75 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:35.75-36.25
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 1.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.70”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.02Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 35.75 m
- To
- 36.25 m
- Intercept Depth
- 35.75 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:35.75-36.25
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 1.92Grade Unit: g/tIntercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.92
- Grade Unit
- g/t
- Intercept
- 3.85 m
- From
- 38.7 m
- To
- 42.55 m
- Intercept Depth
- 38.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:38.7-42.55
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.92 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 7.4 g/t·m is below.
Negative factors
- 1.92 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.92”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 2.41Grade Unit: g/tIntercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.41
- Grade Unit
- g/t
- Intercept
- 3.85 m
- From
- 38.7 m
- To
- 42.55 m
- Intercept Depth
- 38.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:38.7-42.55
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.41 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.3 g/t·m is below.
Negative factors
- 2.41 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.41”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.13Grade Unit: %Intercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 3.85 m
- From
- 38.7 m
- To
- 42.55 m
- Intercept Depth
- 38.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:38.7-42.55
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 2.78Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.78
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 40.6 m
- To
- 41.2 m
- Intercept Depth
- 40.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:40.6-41.2
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.78 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.78”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 6.3Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 6.3
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 40.6 m
- To
- 41.2 m
- Intercept Depth
- 40.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:40.6-41.2
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 6.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.8 g/t·m is below.
Negative factors
- 6.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.30”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.62Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.62
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 40.6 m
- To
- 41.2 m
- Intercept Depth
- 40.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:40.6-41.2
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.62 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.62 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.62”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 9.59Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 9.59
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 42 m
- To
- 42.55 m
- Intercept Depth
- 42 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:42-42.55
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 9.59 g/t gold is strong against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 5.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 9.59 g/t gold is strong on the underground mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.59”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 5.5Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.5
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 42 m
- To
- 42.55 m
- Intercept Depth
- 42 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:42-42.55
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 5.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.0 g/t·m is below.
Negative factors
- 5.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.50”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.11Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 42 m
- To
- 42.55 m
- Intercept Depth
- 42 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:42-42.55
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.11 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 0.47Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 98.2 m
- To
- 98.7 m
- Intercept Depth
- 98.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:98.2-98.7
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.47 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.47 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.47”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 1.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 98.2 m
- To
- 98.7 m
- Intercept Depth
- 98.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:98.2-98.7
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 1.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.80”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 98.2 m
- To
- 98.7 m
- Intercept Depth
- 98.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:98.2-98.7
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 1.19Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.19
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 106.8 m
- To
- 108.5 m
- Intercept Depth
- 106.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:106.8-108.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.19 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.0 g/t·m is below.
Negative factors
- 1.19 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.19”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 1.49Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.49
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 106.8 m
- To
- 108.5 m
- Intercept Depth
- 106.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:106.8-108.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.49 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.5 g/t·m is below.
Negative factors
- 1.49 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.49”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.07Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 106.8 m
- To
- 108.5 m
- Intercept Depth
- 106.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:106.8-108.5
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 3.14Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.14
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 106.8 m
- To
- 107.3 m
- Intercept Depth
- 106.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:106.8-107.3
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 3.14 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.14”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 2.2Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 106.8 m
- To
- 107.3 m
- Intercept Depth
- 106.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:106.8-107.3
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 2.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.20”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 0.07Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 106.8 m
- To
- 107.3 m
- Intercept Depth
- 106.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:106.8-107.3
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 0.28Grade Unit: g/tIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 2.9 m
- From
- 118.7 m
- To
- 121.6 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:118.7-121.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.28 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 3.65Grade Unit: g/tIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.65
- Grade Unit
- g/t
- Intercept
- 2.9 m
- From
- 118.7 m
- To
- 121.6 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:118.7-121.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 3.65 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 10.6 g/t·m is below.
Negative factors
- 3.65 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.65”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 1.41Grade Unit: %Intercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.41
- Grade Unit
- %
- Intercept
- 2.9 m
- From
- 118.7 m
- To
- 121.6 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:118.7-121.6
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 1.41 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 4.1 %·m is below.
Negative factors
- 1.41 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.41”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 0.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 118.7 m
- To
- 119.2 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:118.7-119.2
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 0.9 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.9 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.90”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 14.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 14.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 118.7 m
- To
- 119.2 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:118.7-119.2
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 14.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 7.5 g/t·m is below.
Negative factors
- 14.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.90”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 8.18Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 8.18
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 118.7 m
- To
- 119.2 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:118.7-119.2
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 8.18 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 4.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.18”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · goldGrade: 2.22Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.22
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 129.6 m
- To
- 130.1 m
- Intercept Depth
- 129.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:129.6-130.1
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 2.22 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 2.22 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.22”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · silverGrade: 10.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 10.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 129.6 m
- To
- 130.1 m
- Intercept Depth
- 129.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:129.6-130.1
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 10.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.0 g/t·m is below.
Negative factors
- 10.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.10”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-096Ishkōday · zincGrade: 3.05Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-096
- Project
- Ishkōday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.05
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 129.6 m
- To
- 130.1 m
- Intercept Depth
- 129.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-096:129.6-130.1
- Mining Method
- underground
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-07T00:00:00.000Z
Reasoning: Expanded from assay table. 3.05 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.05”
Context: LBX25-096
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.