LAURION Reports Multiple Gold and Polymetallic Intercepts, Including 3.75 m Grading 0.568 g/t Au, 12.40 g/t Ag, 0.46% Cu and 1.75% Zn and 0.50 m Grading 3.220 g/t Au and 6.29% Zn at Ishk?day
Original announcement by orestocks on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME.V
- Exchange
- Unavailable
- Region
- Northwestern Ontario
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-14 14:07:08 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration Inc. reported assay results from drill holes LBX26-106 and LBX26-107 at its Ishkōday Gold and Polymetallic Project in Northwestern Ontario. The drilling, part of an expanded Phase 1 program, returned multiple polymetallic intercepts, including 0.50 m grading 3.220 g/t Au and 6.29% Zn in LBX26-106. The program aims to advance the A-Zone and support a potential maiden Mineral Resource Estimate.
Reasoning: LAURION's latest drill results from the Ishkōday Project confirm and extend polymetallic mineralization, with several strong to moderate grade intercepts for gold, copper, and zinc. The drilling is part of a program designed to support a potential maiden Mineral Resource Estimate, indicating progress towards resource definition. However, true widths have not yet been determined, and the nominal cut-off grade is not specified.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Step-Out Extension
- Strong Gold Grade
- Moderate Copper Grade
- Moderate Zinc Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Facts used in scoring: 99
Extracted facts
Stored fact records: 99. Some facts used in scoring do not have a stored record.
Drill Results (99)
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.18Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 16 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:16-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.180”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 5.57Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 5.57
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 16 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:16-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“5.57”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.05Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 16 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:16-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.05”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 2.19Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.19
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 16 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:16-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.19”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.374Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.374
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 17 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:17-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.374”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 13.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 13.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 17 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:17-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“13.5”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.08Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 17 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:17-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.08”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 5.61Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 5.61
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 17 m
- To
- 17.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:17-17.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept shows a moderate grade over a narrow width, indicating a higher-grade zone within the broader mineralization and contributing positively to the understanding of the polymetallic system.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Zinc Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“5.61”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.043Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.043
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 30.3 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.043”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 0.73Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 30.3 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.73”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 30.3 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.01”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.42Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 30.3 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.42”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.136Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.136
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 30.3 m
- To
- 31 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-31
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.136”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 0.8Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 30.3 m
- To
- 31 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-31
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.80”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 30.3 m
- To
- 31 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-31
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.01”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.15Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 30.3 m
- To
- 31 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:30.3-31
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.15”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.028Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.028
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 33 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:33-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.028”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 1.07Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 33 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:33-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.07”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 33 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:33-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.01”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.98Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 33 m
- To
- 34.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 30.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:33-34.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of very low grade, contributing to the overall geological understanding but not indicating significant mineralization.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.98”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.133Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.133
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 59.5 m
- To
- 60 m
- Hole Depth
- 360 m
- Intercept Depth
- 59.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:59.5-60
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.133”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 2.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 59.5 m
- To
- 60 m
- Hole Depth
- 360 m
- Intercept Depth
- 59.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:59.5-60
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.80”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.05Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 59.5 m
- To
- 60 m
- Hole Depth
- 360 m
- Intercept Depth
- 59.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:59.5-60
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.05”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 2.52Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.52
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 59.5 m
- To
- 60 m
- Hole Depth
- 360 m
- Intercept Depth
- 59.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:59.5-60
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.52”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.146Grade Unit: g/tIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.146
- Grade Unit
- g/t
- Intercept
- 4.3 m
- From
- 73 m
- To
- 77.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73-77.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a moderate width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.146”
Context: 4.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 7.79Grade Unit: g/tIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 7.79
- Grade Unit
- g/t
- Intercept
- 4.3 m
- From
- 73 m
- To
- 77.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73-77.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a moderate width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“7.79”
Context: 4.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.11Grade Unit: %Intercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 4.3 m
- From
- 73 m
- To
- 77.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73-77.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a moderate width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.11”
Context: 4.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.24Grade Unit: %Intercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 4.3 m
- From
- 73 m
- To
- 77.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73-77.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a moderate width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.24”
Context: 4.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.178Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.178
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 73.7 m
- To
- 75 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-75
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.178”
Context: 1.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 20.41Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 20.41
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 73.7 m
- To
- 75 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-75
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“20.41”
Context: 1.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.26Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 73.7 m
- To
- 75 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-75
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.26”
Context: 1.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.68Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.68
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 73.7 m
- To
- 75 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-75
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept, while narrow, shows a slightly higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.68”
Context: 1.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.314Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.314
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 73.7 m
- To
- 74.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-74.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.314”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 40.6Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 40.6
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 73.7 m
- To
- 74.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-74.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“40.60”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.54Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 73.7 m
- To
- 74.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-74.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept shows a moderate grade over a narrow width, indicating a higher-grade zone within the broader mineralization and contributing positively to the understanding of the polymetallic system.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Copper Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.54”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.92Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.92
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 73.7 m
- To
- 74.3 m
- Hole Depth
- 360 m
- Intercept Depth
- 73 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:73.7-74.3
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.92”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.329Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.329
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 104 m
- To
- 104.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 104 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:104-104.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.329”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 0.9Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 104 m
- To
- 104.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 104 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:104-104.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of very low grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.90”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 104 m
- To
- 104.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 104 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:104-104.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of very low grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.01”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.07Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 104 m
- To
- 104.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 104 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:104-104.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of very low grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.07”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.117Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.117
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 113 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:113-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a moderate width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.117”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 2.42Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.42
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 113 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:113-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a moderate width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.42”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.03Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 9 m
- From
- 113 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:113-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a moderate width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.03”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.37Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 9 m
- From
- 113 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:113-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a moderate width, but contributes to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.37”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.428Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.428
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 121 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:121-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.428”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 8.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 8.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 121 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:121-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“8.20”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.09Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 121 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:121-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.09”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 1.23Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.23
- Grade Unit
- %
- Intercept
- 1 m
- From
- 121 m
- To
- 122 m
- Hole Depth
- 360 m
- Intercept Depth
- 113 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:121-122
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.23”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.336Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.336
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.336”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 3.24Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 3.24
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“3.24”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.03”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.84Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.84
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.84”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.672Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.672
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 149.8 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149.8-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.672”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 5.8Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 5.8
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 149.8 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149.8-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“5.80”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.05Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 149.8 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149.8-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.05”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.81Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 149.8 m
- To
- 150.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 149 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:149.8-150.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept, while narrow, shows a higher grade within a broader interval, contributing to the understanding of mineralization in the area.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.81”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.582Grade Unit: g/tIntercept: 4.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.582
- Grade Unit
- g/t
- Intercept
- 4.7 m
- From
- 172.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:172.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of moderate grade over a moderate width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.582”
Context: 4.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 2.53Grade Unit: g/tIntercept: 4.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.53
- Grade Unit
- g/t
- Intercept
- 4.7 m
- From
- 172.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:172.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a moderate width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.53”
Context: 4.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.07Grade Unit: %Intercept: 4.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4.7 m
- From
- 172.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:172.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a moderate width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.07”
Context: 4.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.93Grade Unit: %Intercept: 4.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.93
- Grade Unit
- %
- Intercept
- 4.7 m
- From
- 172.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:172.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a moderate width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.93”
Context: 4.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.742Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.742
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 174.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of moderate grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.742”
Context: 2.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 3.88Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 3.88
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 174.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“3.88”
Context: 2.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.1Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 174.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.10”
Context: 2.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 1.58Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.58
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 174.5 m
- To
- 177.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-177.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.58”
Context: 2.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 3.22Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 3.22
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 174.5 m
- To
- 175 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-175
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept shows a strong grade over a narrow width, representing a high-grade zone within the broader mineralization and significantly contributing to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Strong Gold Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“3.220”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 9.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 9.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 174.5 m
- To
- 175 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-175
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept shows a higher grade over a narrow width, representing a high-grade zone within the broader mineralization and contributing positively to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“9.70”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.3Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 174.5 m
- To
- 175 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-175
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept shows a moderate grade over a narrow width, representing a high-grade zone within the broader mineralization and significantly contributing to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Copper Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.30”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 6.29Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 6.29
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 174.5 m
- To
- 175 m
- Hole Depth
- 360 m
- Intercept Depth
- 172.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:174.5-175
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept shows a moderate grade over a narrow width, representing a high-grade zone within the broader mineralization and significantly contributing to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Zinc Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“6.29”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.284Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.284
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 182 m
- To
- 182.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 182 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:182-182.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.284”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 10.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 10.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 182 m
- To
- 182.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 182 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:182-182.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“10.80”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.24Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 182 m
- To
- 182.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 182 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:182-182.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.24”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.06Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 182 m
- To
- 182.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 182 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:182-182.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of very low grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.06”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.11Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 215 m
- To
- 216 m
- Hole Depth
- 360 m
- Intercept Depth
- 215 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:215-216
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.110”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 1.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 215 m
- To
- 216 m
- Hole Depth
- 360 m
- Intercept Depth
- 215 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:215-216
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.40”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 215 m
- To
- 216 m
- Hole Depth
- 360 m
- Intercept Depth
- 215 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:215-216
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.03”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.25Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 1 m
- From
- 215 m
- To
- 216 m
- Hole Depth
- 360 m
- Intercept Depth
- 215 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:215-216
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.25”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.1Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 235 m
- To
- 236.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 235 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:235-236.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.100”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 2.5Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 235 m
- To
- 236.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 235 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:235-236.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.50”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.11Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 235 m
- To
- 236.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 235 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:235-236.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.11”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.42Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 235 m
- To
- 236.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 235 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:235-236.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.42”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.617Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.617
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 250.7 m
- To
- 251.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 250.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:250.7-251.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of moderate grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.617”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 2.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 250.7 m
- To
- 251.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 250.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:250.7-251.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.80”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 250.7 m
- To
- 251.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 250.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:250.7-251.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.01”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 250.7 m
- To
- 251.2 m
- Hole Depth
- 360 m
- Intercept Depth
- 250.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:250.7-251.2
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of very low grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.10”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.18Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 271.1 m
- To
- 271.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 271.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:271.1-271.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.18”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 2.9Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 271.1 m
- To
- 271.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 271.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:271.1-271.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“2.90”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.11Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 271.1 m
- To
- 271.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 271.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:271.1-271.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.11”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 0.93Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.93
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 271.1 m
- To
- 271.7 m
- Hole Depth
- 360 m
- Intercept Depth
- 271.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:271.1-271.7
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing to the overall understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.93”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.568Grade Unit: g/tIntercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.568
- Grade Unit
- g/t
- Intercept
- 3.75 m
- From
- 278.75 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:278.75-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of moderate grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Gold Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.568”
Context: 3.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 12.4Grade Unit: g/tIntercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 12.4
- Grade Unit
- g/t
- Intercept
- 3.75 m
- From
- 278.75 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:278.75-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“12.40”
Context: 3.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.46Grade Unit: %Intercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 3.75 m
- From
- 278.75 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:278.75-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept is of moderate grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Copper Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.46”
Context: 3.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 1.75Grade Unit: %Intercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.75
- Grade Unit
- %
- Intercept
- 3.75 m
- From
- 278.75 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:278.75-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, contributing positively to the understanding of the polymetallic system within the ongoing drill program.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.75”
Context: 3.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 0.886Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.886
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 280.2 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:280.2-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept is of moderate grade over a narrow width, representing a higher-grade zone within the broader mineralization and contributing positively to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Gold Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.886”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 19.26Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 19.26
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 280.2 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:280.2-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept is of weak grade over a narrow width, representing a higher-grade zone within the broader mineralization and contributing positively to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“19.26”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 0.73Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 280.2 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:280.2-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept shows a moderate grade over a narrow width, representing a high-grade zone within the broader mineralization and significantly contributing to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Copper Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“0.73”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · zincGrade: 1.64Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.64
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 280.2 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:280.2-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This zinc intercept is of weak grade over a narrow width, representing a higher-grade zone within the broader mineralization and contributing positively to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.64”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · goldGrade: 1.73Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.73
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 282 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:282-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This gold intercept shows a moderate grade over a narrow width, representing a high-grade zone within the broader mineralization and significantly contributing to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Gold Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.730”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · silverGrade: 43.2Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 43.2
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 282 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:282-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This silver intercept shows a higher grade over a narrow width, representing a high-grade zone within the broader mineralization and contributing positively to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“43.20”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-106and is being evaluated to assess continuity within the mineralized · copperGrade: 1.51Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-106
- Project
- and is being evaluated to assess continuity within the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 282 m
- To
- 282.5 m
- Hole Depth
- 360 m
- Intercept Depth
- 278.75 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-106:282-282.5
- Mining Method
- unknown
Location
- Easting
- 446098
- Northing
- 5512521
- Elevation
- 324 m
- Azimuth
- 140 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-14T00:00:00.000Z
Reasoning: This copper intercept shows a moderate grade over a narrow width, representing a high-grade zone within the broader mineralization and significantly contributing to the project's potential.
Positive factors
- QA/QC Disclosed
- QP/CP Signed
- Infill Drilling
- Moderate Copper Grade
Negative factors
- Apparent Width Only
- Cut-off Undisclosed
Evidence · table
“1.51”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.